Arch Linux Forums
Discussion forums for Arch Linux, a simple, lightweight linux distribution.
You are not logged in.
#1 2007-11-14 08:55:48
- firewalker
- Member
- From: Hellas (Greece).
- Registered: 2006-06-05
- Posts: 227
K3b's verify optin doesn't work
It writes fine. When the writing process completes it opens the tray but it doesn't close it again for the verification process to take place. The program doesn't freeze. If I push the cancel button it responds fine. I closed the tray by the open/close button but the process didn't start. The system could read the disk without any problem. Have anyone else this problem?
k3b 1.0.4-1
Γίνε ρεαλιστής, μείνε ονειροπόλος ...
Offline
#2 2007-11-14 10:21:22
- [vEX]
- Member
- From: Sweden
- Registered: 2006-11-23
- Posts: 435
Re: K3b's verify optin doesn't work
It happens to me too, after the burn is complete the tray is ejected, though for me k3b freezes. Inserting the disc again doesn't help, it stays frozen till I kill it. Using k3b 1.0.4-1 and Openbox so no complete KDE environment is installed, only whatever k3b depends on.
PC: Antec P182B | Asrock K10N78FULLHD-HSLI R3.0 | AMD Athlon II X3 425 | 2x2048MB PC6400 | Sparkle GeForce 9600GT | WD Caviar Blue 640GB SATA2 | Pioneer DVR-215D | M-Audio DiO 2448 | Altec Lansing CS21 | Dell 2209WA | Arch Linux x86_64
HTPC: Antec NSK2480 | ASUS M3A78-EM (AMD 780G) | AMD Athlon X2 4850e | 2x2048MB PC6400 | Gainward GeForce G210 | WD Caviar Green 1TB SATA2 | Arch Linux x86_64
Offline
#3 2007-11-14 11:31:32
- firewalker
- Member
- From: Hellas (Greece).
- Registered: 2006-06-05
- Posts: 227
Re: K3b's verify optin doesn't work
I found a bug reference...
http://bugs.kde.org/show_bug.cgi?id=151816
Γίνε ρεαλιστής, μείνε ονειροπόλος ...
Offline
#4 2007-11-14 15:25:56
- [vEX]
- Member
- From: Sweden
- Registered: 2006-11-23
- Posts: 435
Re: K3b's verify optin doesn't work
So it seems to be an upstream bug, guess we have to wait for 1.0.5 then. Thanks for sharing the link.
PC: Antec P182B | Asrock K10N78FULLHD-HSLI R3.0 | AMD Athlon II X3 425 | 2x2048MB PC6400 | Sparkle GeForce 9600GT | WD Caviar Blue 640GB SATA2 | Pioneer DVR-215D | M-Audio DiO 2448 | Altec Lansing CS21 | Dell 2209WA | Arch Linux x86_64
HTPC: Antec NSK2480 | ASUS M3A78-EM (AMD 780G) | AMD Athlon X2 4850e | 2x2048MB PC6400 | Gainward GeForce G210 | WD Caviar Green 1TB SATA2 | Arch Linux x86_64
Offline
#5 2007-12-28 07:21:45
- firewalker
- Member
- From: Hellas (Greece).
- Registered: 2006-06-05
- Posts: 227
Re: K3b's verify optin doesn't work
There is a patch... Maybe the maintainer could rebuild k3b including the patch.
http://bugs.kde.org/show_bug.cgi?id=151816
http://bugs.kde.org/attachment.cgi?id=2 … ction=view
Last edited by firewalker (2007-12-28 07:23:44)
Γίνε ρεαλιστής, μείνε ονειροπόλος ...
Offline
#6 2007-12-28 08:12:35
- byte
- Member
- From: Düsseldorf (DE)
- Registered: 2006-05-01
- Posts: 1755
Re: K3b's verify optin doesn't work
Is this already on bugs.archlinux.org?
I hate sigs. This one only exists to remind myself to get an avatar.
Offline
#7 2007-12-28 12:16:17
- azleifel
- Member
- Registered: 2007-10-28
- Posts: 314
Re: K3b's verify optin doesn't work
Just thought that I'd share this: As there didn't seem to be any activity with Bug 151816 at the time, I fiddled around a little and found that verification will work here if k3b is set it to not eject the medium after the write process is complete (Settings -> Advanced, Miscellaneous, Do not eject medium after write process).
Offline
#8 2008-01-03 09:44:23
- firewalker
- Member
- From: Hellas (Greece).
- Registered: 2006-06-05
- Posts: 227
Re: K3b's verify optin doesn't work
azleifel wrote:
Just thought that I'd share this: As there didn't seem to be any activity with Bug 151816 at the time, I fiddled around a little and found that verification will work here if k3b is set it to not eject the medium after the write process is complete (Settings -> Advanced, Miscellaneous, Do not eject medium after write process).
Confirmed! It works for me too.
Γίνε ρεαλιστής, μείνε ονειροπόλος ...
Offline