You are not logged in.
- Topics: Active | Unanswered
#1 2009-10-20 19:58:33
- clmates
- Member
- From: A Coruña - España
- Registered: 2009-04-25
- Posts: 79
KDE never finish to start after pacman -Syu [SOLVED]
Hi to All.
I have upgraded my system with pacman -Syu (I have to upgrade first broadcom-wl).
after upgrading to new kernel, I reinstalled pacman and nvidia and nvidia-utils
started kde and it begins to start session, but 4 processs get full cpu and never ends the session init
the processes are kbuildsyscoca (2 processes), kded4 and kconf_update
If I start twm instead of kde it works
I readed the forums and althoug not seen something similar, decide to downgrade kernel, and recompile (reinstall broadcom-wl, and nvidia drivers)
then tested again and the same results.
last test was to move my .kde and .kde4 folders to a backup and start kde again (starting from startx and not kdm)
this time it launched a lot (more than 100 kconf_update trying to update some stuff of kopete)
then deinstalled kopete and all kde-meta packages that are not needed now, but still have the same problem,
the 4 processes keep running and the desktop never comes up. (black screen with cursor I can move)
anyone with similar sympthoms?
any thing I can try?
as a summary x seems to work fine (twm starts)
wireless works fine
nvidia works fine
only kde get stuck ant the init
any help appreciated.
Thanks
Last edited by clmates (2009-11-03 18:32:51)
-
Arch64 - Acer AX3950 - i5-650 3.2 GHz - 8 GB RAM - Nvidia GeForce 320 1 GB Ram
Arch32 - Samsung NC10 - 2 GB Ram
Offline
#2 2009-10-21 10:42:05
- clmates
- Member
- From: A Coruña - España
- Registered: 2009-04-25
- Posts: 79
Re: KDE never finish to start after pacman -Syu [SOLVED]
Hi.
More Information.
is a x86_64 install
I have installed LXDE and it is working withouth any problem
also have tried and deisntalled all kde packages
pacman -R $(pacman -Qqs kde)
then reinstalled again all kde
then deleted my home .kde and .kde4 (well really backed them up)
and start kde ad still the same problem.
What kde configuration files could I revise to look if pacman has created any new or changed any?
thanks
-
Arch64 - Acer AX3950 - i5-650 3.2 GHz - 8 GB RAM - Nvidia GeForce 320 1 GB Ram
Arch32 - Samsung NC10 - 2 GB Ram
Offline
#3 2009-10-21 16:37:05
- quarkup
- Member
- From: Portugal
- Registered: 2008-09-07
- Posts: 497
- Website
Re: KDE never finish to start after pacman -Syu [SOLVED]
check the logfiles
they are usualy in /var/log
these two files:
/var/log/Xorg.0.log
/var/log/kdm.log
should tell you about the errors. and this may help you.
If people do not believe that mathematics is simple, it is only because they do not realize how complicated life is.
Simplicity is the ultimate sophistication.
Offline
#4 2009-10-21 19:46:52
- clmates
- Member
- From: A Coruña - España
- Registered: 2009-04-25
- Posts: 79
Re: KDE never finish to start after pacman -Syu [SOLVED]
Hi.
I will post here by parts as the post is too long
test with other user in my system and with root all fails with the same sympthoms
I attach here the logs of the following test done with another user (charo)
steps.
/etc/rc.d/kdm stop
rm /var/log/kdm.log
rm /var/log/xorg.o.mslog
rm /home/charo/.xsession-errors
rm -r /home/charo/.kde
rm -r /home/charo/.kde4
rm -r /tmp/kde-charo
rm -r /tmp/ksocket-charo
rm -r /var/tmp/kdecache-charo
so If I not forhet none, all stuff regarding kde for user charo is non existant
then started kdm
/etc/rc.d/kdm start
then login with user charo in a standard kde4 session
the splash screen comes up and only the 2 fisrt icons come up (between the first and the second almost 2 minutes passes), then the screen goes blue (default background), and a powerdevil error is shown, we can move the mouse, and clicking in the error it dissapear, but eh screen keeps blue without any data (icons, applets, panels, etc), no element is shown
here are the logs
/var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux aragorn 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:57:24 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "SynapticsTouchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) Cannot locate a core pointer device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(II) Loader magic: 0x1d40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI: (0:0:10:3) 10de:0271:103c:30b7 nVidia Corporation MCP51 PMU rev 163, Mem @ 0xc0040000/262144
(--) PCI:*(0:5:0:0) 10de:01d6:103c:30b7 nVidia Corporation G72M [GeForce Go 7200] rev 161, Mem @ 0xc7000000/16777216, 0xd0000000/268435456, 0xc6000000/16777216
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 190.40 Thu Oct 15 16:12:47 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) NVIDIA dlloader X Driver 190.40 Thu Oct 15 15:08:33 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 05@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "HWcursor"
(**) Oct 21 20:57:24 NVIDIA(0): Enabling RENDER acceleration
(II) Oct 21 20:57:25 NVIDIA(0): NVIDIA GPU GeForce Go 7200 (G72) at PCI:5:0:0 (GPU-0)
(--) Oct 21 20:57:25 NVIDIA(0): Memory: 262144 kBytes
(--) Oct 21 20:57:25 NVIDIA(0): VideoBIOS: 05.72.22.41.c9
(II) Oct 21 20:57:25 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Oct 21 20:57:25 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Oct 21 20:57:25 NVIDIA(0): Connected display device(s) on GeForce Go 7200 at PCI:5:0:0:
(--) Oct 21 20:57:25 NVIDIA(0): LPL (DFP-0)
(--) Oct 21 20:57:25 NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
(--) Oct 21 20:57:25 NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
(II) Oct 21 20:57:25 NVIDIA(0): Assigned Display Device: DFP-0
(WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "1280x768"; removing.
(WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "1280x720"; removing.
(WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "1280x600"; removing.
(WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "1024x600"; removing.
(WW) Oct 21 20:57:25 NVIDIA(0): No valid modes for "768x576"; removing.
(II) Oct 21 20:57:25 NVIDIA(0): Validated modes:
(II) Oct 21 20:57:25 NVIDIA(0): "1280x800"
(II) Oct 21 20:57:25 NVIDIA(0): "1024x768"
(II) Oct 21 20:57:25 NVIDIA(0): "800x600"
(II) Oct 21 20:57:25 NVIDIA(0): Virtual screen size determined to be 1280 x 800
(--) Oct 21 20:57:25 NVIDIA(0): DPI set to (98, 96); computed from "UseEdidDpi" X config
(--) Oct 21 20:57:25 NVIDIA(0): option
(==) Oct 21 20:57:25 NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) Oct 21 20:57:25 NVIDIA(0): Initialized GPU GART.
(II) Oct 21 20:57:25 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 20:57:25 NVIDIA(0): enough to receive ACPI display change hotkey events.
(II) Oct 21 20:57:25 NVIDIA(0): Setting mode "1280x800"
(II) Loading extension NV-GLX
(II) Oct 21 20:57:25 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Oct 21 20:57:25 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(WW) NVIDIA(0): Option "CalcAlgorithm" is not used
(WW) NVIDIA(0): Option "PreferredMode" is not used
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) Synaptics touchpad driver version 1.1.3
(--) SynapticsTouchpad auto-dev sets device to /dev/input/event8
(**) Option "Device" "/dev/input/event8"
(II) SynapticsTouchpad: x-axis range 1472 - 5472
(II) SynapticsTouchpad: y-axis range 1408 - 4448
(II) SynapticsTouchpad: pressure range 0 - 255
(II) SynapticsTouchpad: finger width range 0 - 0
(II) SynapticsTouchpad: buttons: left right middle double triple
(**) Option "SHMConfig" "true"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "VertScrollDelta" "100"
(**) Option "HorizScrollDelta" "100"
(**) Option "VertEdgeScroll" "true"
(**) Option "HorizEdgeScroll" "true"
(**) Option "CornerCoasting" "true"
(**) Option "VertTwoFingerScroll" "true"
(**) Option "HorizTwoFingerScroll" "true"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "MinSpeed" "0.40"
(**) Option "MaxSpeed" "0.80"
(**) Option "AccelFactor" "0.0020"
(**) Option "CoastingSpeed" "0.30"
(--) SynapticsTouchpad: touchpad found
(**) Option "AlwaysCore" "true"
(**) Option "SendCoreEvents"
(**) SynapticsTouchpad: always reports core events
(II) XINPUT: Adding extended input device "SynapticsTouchpad" (type: TOUCHPAD)
(**) SynapticsTouchpad: (accel) keeping acceleration scheme 1
(**) SynapticsTouchpad: (accel) filter chain progression: 2.00
(**) SynapticsTouchpad: (accel) filter stage 0: 20.00 ms
(**) SynapticsTouchpad: (accel) set acceleration profile 0
(--) SynapticsTouchpad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device USB 2.0 Camera
(**) USB 2.0 Camera: always reports core events
(**) USB 2.0 Camera: Device: "/dev/input/event7"
(II) USB 2.0 Camera: Found keys
(II) USB 2.0 Camera: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event5"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "es"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Oct 21 20:59:19 NVIDIA(0): Setting mode "1280x800"
(II) Oct 21 20:59:19 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 20:59:19 NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) SynapticsTouchpad: touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) USB 2.0 Camera: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Oct 21 20:59:36 NVIDIA(0): Setting mode "1280x800"
(II) Oct 21 20:59:36 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 20:59:36 NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) SynapticsTouchpad: touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) USB 2.0 Camera: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Oct 21 21:00:27 NVIDIA(0): Setting mode "1280x800"
(II) Oct 21 21:00:27 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 21:00:27 NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) SynapticsTouchpad: touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) USB 2.0 Camera: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Oct 21 21:01:50 NVIDIA(0): Setting mode "1280x800"
(II) Oct 21 21:01:50 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 21:01:50 NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) SynapticsTouchpad: touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) USB 2.0 Camera: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Oct 21 21:02:32 NVIDIA(0): Setting mode "1280x800"
(II) Oct 21 21:02:32 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 21:02:32 NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) SynapticsTouchpad: touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) USB 2.0 Camera: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Oct 21 21:03:17 NVIDIA(0): Setting mode "1280x800"
(II) Oct 21 21:03:17 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 21:03:17 NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) SynapticsTouchpad: touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) USB 2.0 Camera: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Oct 21 21:04:25 NVIDIA(0): Setting mode "1280x800"
(II) Oct 21 21:04:25 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 21:04:25 NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) SynapticsTouchpad: touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) USB 2.0 Camera: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Oct 21 21:15:04 NVIDIA(0): Setting mode "1280x800"
(II) Oct 21 21:15:04 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 21:15:04 NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) SynapticsTouchpad: touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) USB 2.0 Camera: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Oct 21 21:17:09 NVIDIA(0): Setting mode "1280x800"
(II) Oct 21 21:17:10 NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
(II) Oct 21 21:17:10 NVIDIA(0): enough to receive ACPI display change hotkey events.
(--) SynapticsTouchpad: touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) USB 2.0 Camera: Device reopened after 1 attempts.
(II) Sleep Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) USB 2.0 Camera: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"look at times, I started at 20:57, then the server gets to a "final" status at 20:59 then it keeps sending similar messages up to 21:17 when I stopped the kdm and killed the hunged processes
continues in next post
Last edited by clmates (2009-10-21 19:56:53)
-
Arch64 - Acer AX3950 - i5-650 3.2 GHz - 8 GB RAM - Nvidia GeForce 320 1 GB Ram
Arch32 - Samsung NC10 - 2 GB Ram
Offline
#5 2009-10-21 19:59:42
- clmates
- Member
- From: A Coruña - España
- Registered: 2009-04-25
- Posts: 79
Re: KDE never finish to start after pacman -Syu [SOLVED]
continued from previous post
here are the top just before stopping the kdm
top - 21:16:04 up 3:09, 3 users, load average: 4.18, 4.07, 3.28
Tasks: 119 total, 6 running, 113 sleeping, 0 stopped, 0 zombie
Cpu(s): 26.7%us, 0.7%sy, 0.0%ni, 72.0%id, 0.6%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2057748k total, 645088k used, 1412660k free, 113008k buffers
Swap: 2104504k total, 0k used, 2104504k free, 332452k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
14441 charo 20 0 199m 12m 4500 R 51 0.6 9:08.86 kded4
14446 charo 20 0 207m 19m 6888 R 49 1.0 9:28.51 kbuildsycoca4
14483 charo 20 0 210m 21m 6852 R 49 1.1 9:04.09 kbuildsycoca4
14501 charo 20 0 197m 11m 3300 R 49 0.5 8:47.06 kconf_update
1 root 20 0 3796 624 536 S 0 0.0 0:00.51 init
2 root 15 -5 0 0 0 S 0 0.0 0:00.00 kthreadd
3 root RT -5 0 0 0 S 0 0.0 0:00.01 migration/0
4 root 15 -5 0 0 0 S 0 0.0 0:00.41 ksoftirqd/0
5 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/0
6 root RT -5 0 0 0 S 0 0.0 0:00.00 migration/1
7 root 15 -5 0 0 0 S 0 0.0 0:05.53 ksoftirqd/1
8 root RT -5 0 0 0 S 0 0.0 0:00.00 watchdog/1
9 root 15 -5 0 0 0 S 0 0.0 0:00.04 events/0
10 root 15 -5 0 0 0 S 0 0.0 0:00.53 events/1
11 root 15 -5 0 0 0 S 0 0.0 0:00.00 khelper
12 root 15 -5 0 0 0 S 0 0.0 0:00.00 async/mgr
13 root 15 -5 0 0 0 S 0 0.0 0:00.00 kblockd/0
14 root 15 -5 0 0 0 S 0 0.0 0:00.02 kblockd/1
15 root 15 -5 0 0 0 S 0 0.0 0:00.01 kacpid
16 root 15 -5 0 0 0 S 0 0.0 0:00.00 kacpi_notify
17 root 15 -5 0 0 0 S 0 0.0 0:00.09 kseriod
18 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd
19 root 20 0 0 0 0 S 0 0.0 0:00.09 pdflush
20 root 20 0 0 0 0 S 0 0.0 0:00.41 pdflush
21 root 15 -5 0 0 0 S 0 0.0 0:00.00 kswapd0
22 root 15 -5 0 0 0 S 0 0.0 0:00.00 aio/0
23 root 15 -5 0 0 0 S 0 0.0 0:00.00 aio/1
24 root 15 -5 0 0 0 S 0 0.0 0:00.00 crypto/0
25 root 15 -5 0 0 0 S 0 0.0 0:00.00 crypto/1look at the four top processes they stay like this forever
now the /var/log/kdm.log
********************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
********************************************************************************
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux aragorn 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 x86_64
Build Date: 04 September 2009 05:45:43PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 21 20:57:24 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "freetype" (module does not exist, 0)
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X serverno strange messages
now the .xsession-errors
Agent pid 14421
startkde: Starting up...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_klauncher.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kded4.so
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kbuildsycoca4.so
kbuildsycoca4 running...
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kconf_update.so
"KConfigIni: In file /tmp/kde-charo/kconf_updatez14501.tmp, line 1: " Invalid entry (missing '=')
Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
kdeinit4: preparing to launch /usr/bin/knotify4
"Warning: You do not seem to have the package gstreamer0.10-plugins-good installed.
Some video features have been disabled."
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
kdeinit4: preparing to launch /usr/lib/libkdeinit4_kcminit_startup.so
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
X Error: XSyncBadAlarm 169
Extension: 147 (Uknown extension)
Minor opcode: 11 (Unknown request)
Resource id: 0x0
kcminit_startup: Fatal IO error: client killed
kded4: Fatal IO error: client killed
knotify4: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.the last lines (repeated here), are the ones that wrote when I stopped kdm and killed the hunged processes
kcminit_startup: Fatal IO error: client killed
kded4: Fatal IO error: client killed
knotify4: Fatal IO error: client killed
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
klauncher: Exiting on signal 1
kdeinit4: Fatal IO error: client killed
kdeinit4: sending SIGHUP to children.
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.
kdeinit4: sending SIGTERM to children.
kdeinit4: Exit.I can see errors relating consolekit, I have consolekit up to date, (reinstalled today before this tests)
I am writting this from the same computer running on lxde
so X and nvidia works
any help appreciated
-
Arch64 - Acer AX3950 - i5-650 3.2 GHz - 8 GB RAM - Nvidia GeForce 320 1 GB Ram
Arch32 - Samsung NC10 - 2 GB Ram
Offline
#6 2009-10-21 20:15:34
- tavianator
- Member
- From: Waterloo, ON, Canada
- Registered: 2007-08-21
- Posts: 858
- Website
Re: KDE never finish to start after pacman -Syu [SOLVED]
Try backing up your .kde4 (mv ~/.kde4 kde4-backup) and starting with a clean slate, so to speak.
Offline
#7 2009-10-21 20:16:56
- clmates
- Member
- From: A Coruña - España
- Registered: 2009-04-25
- Posts: 79
Re: KDE never finish to start after pacman -Syu [SOLVED]
Hi.
Try backing up your .kde4 (mv ~/.kde4 kde4-backup) and starting with a clean slate, so to speak.
That's Is what i have done, with a new user, and no .kde dirs, deleted read above
-
Arch64 - Acer AX3950 - i5-650 3.2 GHz - 8 GB RAM - Nvidia GeForce 320 1 GB Ram
Arch32 - Samsung NC10 - 2 GB Ram
Offline
#8 2009-10-29 15:15:40
- klixu
- Member
- Registered: 2009-10-29
- Posts: 19
Re: KDE never finish to start after pacman -Syu [SOLVED]
I've got the same problem. I had a bunch of other problems as well, but now I'm in twm and kdemod doesn't work even with a new user.
Offline
#9 2009-10-29 20:35:57
- tavianator
- Member
- From: Waterloo, ON, Canada
- Registered: 2007-08-21
- Posts: 858
- Website
Re: KDE never finish to start after pacman -Syu [SOLVED]
Hmm. Maybe try running xinit and running startkde from xterm, and see if it gives any useful output?
Offline
#10 2009-10-29 22:43:57
- grey
- Member
- From: Europe
- Registered: 2007-08-23
- Posts: 679
Re: KDE never finish to start after pacman -Syu [SOLVED]
+1 - take kdm out of the equation. Also, you could compare the Xorg.log file from the failed "start kda" attempt with the one from the successful "start lxde" attempt., and see where they diverge.
Good ideas do not need lots of lies told about them in order to gain public acceptance.
Offline
#11 2009-10-30 11:47:53
- clmates
- Member
- From: A Coruña - España
- Registered: 2009-04-25
- Posts: 79
Re: KDE never finish to start after pacman -Syu [SOLVED]
Hi.
The Xorg logs seems the same in both cases, I think the problem is not related to Xorg but to kde
I'm going to try to launch it from iinittab instead of launching kdm, but I feel that this wont work also
also will try the xinint and startkde from xterm option.
Will comment here next week
Thanks
-
Arch64 - Acer AX3950 - i5-650 3.2 GHz - 8 GB RAM - Nvidia GeForce 320 1 GB Ram
Arch32 - Samsung NC10 - 2 GB Ram
Offline
#12 2009-11-01 11:17:06
- tim
- Member
- From: Sweden
- Registered: 2006-10-29
- Posts: 98
Re: KDE never finish to start after pacman -Syu [SOLVED]
I have exactly the same problem with the latest update.
I solved it by downgrading to the previous version of nvidia 185.
I had to downgrade xorg etc to the previous versions as well as x wouldn't start with the previous version of the nvidia driver.
So all in all, I had to downgrade the following packages to the previous version:
nvidia
nvidia-utils
xorg-server
xorg-server-utils
xf86-input-keyboard
xf86-input-mouse
xf86-input-synaptics
xf86-input-evdev
Hopefully if I compile my own version of the new nvidia driver it will work
Update: I downloaded the latest nvidia drivers from nvidia and compiled it myself and now everything works including the latest versions of xorg etc.
Hopefully this works for others.
Good luck
Last edited by tim (2009-11-01 23:15:10)
Offline
#13 2009-11-02 18:21:41
- clmates
- Member
- From: A Coruña - España
- Registered: 2009-04-25
- Posts: 79
Re: KDE never finish to start after pacman -Syu [SOLVED]
Hi.
I have exactly the same problem with the latest update.
I solved it by downgrading to the previous version of nvidia 185.
I had to downgrade xorg etc to the previous versions as well as x wouldn't start with the previous version of the nvidia driver.
So all in all, I had to downgrade the following packages to the previous version:
nvidia
nvidia-utils
xorg-server
xorg-server-utils
xf86-input-keyboard
xf86-input-mouse
xf86-input-synaptics
xf86-input-evdevHopefully if I compile my own version of the new nvidia driver it will work
Update: I downloaded the latest nvidia drivers from nvidia and compiled it myself and now everything works including the latest versions of xorg etc.
Hopefully this works for others.
Good luck
Thanks, I tried using abs to compile the latest nvidia drivers, but still fails. I was previously using the 180.53 version but if i try to compile with new kernel I get errors for undefined functions
here are my versions
[carlos@aragorn ~]$ pacman -Qs xorg
local/xf86-input-evdev 2.3.0-1 (xorg-input-drivers)
X.org evdev input driver
local/xf86-input-synaptics 1.2.0-1 (xorg-input-drivers)
synaptics driver for notebook touchpads
local/xf86-video-nv 2.1.15-1 (xorg-video-drivers)
X.org nv video driver
local/xf86-video-vesa 2.2.1-1 (xorg xorg-video-drivers)
X.org vesa video driver
local/xorg-apps 7.5-2
Various X.Org applications
local/xorg-font-utils 7.5-2
X.Org font utilities
local/xorg-fonts-100dpi 1.0.1-2 (xorg)
X.org 100dpi fonts
local/xorg-fonts-75dpi 1.0.1-2 (xorg)
X.org 75dpi fonts
local/xorg-fonts-alias 1.0.2-1
X.org font alias files
local/xorg-fonts-encodings 1.0.3-1
X.org font encoding files
local/xorg-fonts-misc 1.0.0-4
X.org misc fonts
local/xorg-fonts-type1 7.3-1
X.org Type1 fonts
local/xorg-res-utils 1.0.3-3 (xorg)
X.Org X11 resource utilities
local/xorg-server 1.7.1-1 (xorg)
X.Org X servers
local/xorg-server-utils 7.5-3 (xorg)
X.Org utilities required by xorg-server
local/xorg-twm 1.0.4-3 (xorg)
Tab Window Manager for the X Window System
local/xorg-utils 7.5-1 (xorg)
Collection of client utilities used to query the X server
local/xorg-xauth 1.0.4-1
X.Org authorization settings program
local/xorg-xinit 1.1.1-1 (xorg)
X.Org initialisation program
local/xorg-xkb-utils 7.5-1
X.org keyboard utilities
local/xterm 250-1 (xorg)
X Terminal Emulator
[carlos@aragorn ~]$
[carlos@aragorn ~]$ pacman -Qs nvidia
local/nvidia 190.42-1
NVIDIA drivers for kernel26.
local/nvidia-utils 190.42-1
NVIDIA drivers utilities and libraries.
[carlos@aragorn ~]$
all in x86_64
also kde is failing with the nv and the vesa driver
a bit desperate about this :-(
Thanks
-
Arch64 - Acer AX3950 - i5-650 3.2 GHz - 8 GB RAM - Nvidia GeForce 320 1 GB Ram
Arch32 - Samsung NC10 - 2 GB Ram
Offline
#14 2009-11-02 21:20:05
- Satchmo
- Member
- Registered: 2009-04-12
- Posts: 4
Re: KDE never finish to start after pacman -Syu [SOLVED]
Manually downloading and installing the NVIDIA driver from the official package solved this problem for me.
Offline
#15 2009-11-03 18:31:55
- clmates
- Member
- From: A Coruña - España
- Registered: 2009-04-25
- Posts: 79
Re: KDE never finish to start after pacman -Syu [SOLVED]
Hi
Manually downloading and installing the NVIDIA driver from the official package solved this problem for me.
Many Thanks
This solved the issue
I have my kde up and runnig again
-
Arch64 - Acer AX3950 - i5-650 3.2 GHz - 8 GB RAM - Nvidia GeForce 320 1 GB Ram
Arch32 - Samsung NC10 - 2 GB Ram
Offline
#16 2009-11-04 21:02:36
- tim
- Member
- From: Sweden
- Registered: 2006-10-29
- Posts: 98
Re: KDE never finish to start after pacman -Syu [SOLVED]
Just thought I'd report that the latest kde update now works (for me) with the repository version of the nvidia driver.
Offline