HTML view is blanked for WebKit GTK+ Software under X11

RedArcher · 2024-04-30 08:35:11

Good day everyone!

This issue haas been occurring for almost a month or so.

Software like Atril (only for ePUB), BadWolf, Liferea, Luakit, Marker, and other GTK+ software that use WebKit, have a blanked HTML view.

However, on Wayland, HTML view is displayed as intended.

Tested on i3 (X11) and Sway (Wayland).

Last edited by RedArcher (2024-04-30 08:35:47)

seth · 2024-04-30 22:22:07

Blanked visually only or is the page just not rendered at all (ctrl+u)?
Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General
Does

LIBGL_ALWAYS_SOFTWARE=1 browser

avoid the issue?

RedArcher · 2024-05-01 07:29:42

Yes

LIBGL_ALWAYS_SOFTWARE=1 liferea

has solved this problem!

Thank you!

Do you still want me to post Xorg log?

seth · 2024-05-01 07:31:49

Yes.
The enviroment makes you using a software GL implementation, you're not getting any HW acceleration and that's perhaps a wider issue you'd like to address.

RedArcher · 2024-05-02 07:03:06

After a restart, all software work as expected under X11.

Herein the logs.

Xorg.0.log

[    14.654] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[    14.654] Current Operating System: Linux workstation 6.8.7-arch1-2 #1 SMP PREEMPT_DYNAMIC Fri, 19 Apr 2024 09:51:31 +0000 x86_64
[    14.654] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=80f8e3f3-51ff-4a07-a8c6-62a9a416466b rw loglevel=3 quiet
[    14.655]  
[    14.655] Current version of pixman: 0.43.4
[    14.655] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.655] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.655] (==) Log file: "/home/admin/.local/share/xorg/Xorg.0.log", Time: Thu May  2 07:07:53 2024
[    14.657] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    14.658] (==) No Layout section.  Using the first Screen section.
[    14.658] (==) No screen section available. Using defaults.
[    14.658] (**) |-->Screen "Default Screen Section" (0)
[    14.658] (**) |   |-->Monitor "<default monitor>"
[    14.658] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    14.658] (**) Allowing byte-swapped clients
[    14.658] (==) Automatically adding devices
[    14.658] (==) Automatically enabling devices
[    14.658] (==) Automatically adding GPU devices
[    14.658] (==) Automatically binding GPU devices
[    14.658] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    14.660] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    14.660] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.660] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    14.660] (II) Module ABI versions:
[    14.660] 	X.Org ANSI C Emulation: 0.4
[    14.660] 	X.Org Video Driver: 25.2
[    14.660] 	X.Org XInput driver : 24.4
[    14.660] 	X.Org Server Extension : 10.0
[    14.661] (++) using VT number 1

[    14.661] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    14.662] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    14.663] (II) xfree86: Adding drm device (/dev/dri/card0)
[    14.663] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:1c:00.0/drm/card0
[    14.663] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[    14.672] (--) PCI:*(28@0:0:0) 10de:1d01:1043:8621 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    14.672] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    14.672] (II) LoadModule: "glx"
[    14.673] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.676] (II) Module glx: vendor="X.Org Foundation"
[    14.676] 	compiled for 1.21.1.13, module version = 1.0.0
[    14.676] 	ABI class: X.Org Server Extension, version 10.0
[    14.676] (==) Matched nouveau as autoconfigured driver 0
[    14.676] (==) Matched nv as autoconfigured driver 1
[    14.676] (==) Matched modesetting as autoconfigured driver 2
[    14.676] (==) Matched fbdev as autoconfigured driver 3
[    14.676] (==) Matched vesa as autoconfigured driver 4
[    14.676] (==) Assigned the driver to the xf86ConfigLayout
[    14.676] (II) LoadModule: "nouveau"
[    14.676] (WW) Warning, couldn't open module nouveau
[    14.676] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    14.676] (II) LoadModule: "nv"
[    14.676] (WW) Warning, couldn't open module nv
[    14.676] (EE) Failed to load module "nv" (module does not exist, 0)
[    14.676] (II) LoadModule: "modesetting"
[    14.677] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    14.678] (II) Module modesetting: vendor="X.Org Foundation"
[    14.678] 	compiled for 1.21.1.13, module version = 1.21.1
[    14.678] 	Module class: X.Org Video Driver
[    14.678] 	ABI class: X.Org Video Driver, version 25.2
[    14.678] (II) LoadModule: "fbdev"
[    14.678] (WW) Warning, couldn't open module fbdev
[    14.678] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    14.678] (II) LoadModule: "vesa"
[    14.678] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    14.679] (II) Module vesa: vendor="X.Org Foundation"
[    14.679] 	compiled for 1.21.1.11, module version = 2.6.0
[    14.679] 	Module class: X.Org Video Driver
[    14.679] 	ABI class: X.Org Video Driver, version 25.2
[    14.679] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    14.679] (II) VESA: driver for VESA chipsets: vesa
[    14.679] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[    14.679] (II) modeset(0): using drv /dev/dri/card0
[    14.679] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    14.679] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    14.679] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    14.679] (==) modeset(0): RGB weight 888
[    14.679] (==) modeset(0): Default visual is TrueColor
[    14.679] (II) Loading sub module "glamoregl"
[    14.679] (II) LoadModule: "glamoregl"
[    14.679] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    14.682] (II) Module glamoregl: vendor="X.Org Foundation"
[    14.682] 	compiled for 1.21.1.13, module version = 1.0.1
[    14.682] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.087] (II) modeset(0): glamor X acceleration enabled on NV138
[    15.087] (II) modeset(0): glamor initialized
[    15.087] (==) modeset(0): VariableRefresh: disabled
[    15.087] (==) modeset(0): AsyncFlipSecondaries: disabled
[    15.087] (II) modeset(0): Output DP-1 has no monitor section
[    15.160] (II) modeset(0): Output HDMI-1 has no monitor section
[    15.160] (II) modeset(0): EDID for output DP-1
[    15.234] (II) modeset(0): EDID for output HDMI-1
[    15.234] (II) modeset(0): Manufacturer: GSM  Model: 1  Serial#: 16843009
[    15.234] (II) modeset(0): Year: 2016  Week: 1
[    15.234] (II) modeset(0): EDID Version: 1.3
[    15.234] (II) modeset(0): Digital Display Input
[    15.234] (II) modeset(0): Max Image Size [cm]: horiz.: 160  vert.: 90
[    15.234] (II) modeset(0): Gamma: 2.20
[    15.234] (II) modeset(0): No DPMS capabilities specified
[    15.234] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    15.234] (II) modeset(0): First detailed timing is preferred mode
[    15.234] (II) modeset(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    15.234] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    15.234] (II) modeset(0): Supported established timings:
[    15.234] (II) modeset(0): 720x400@70Hz
[    15.234] (II) modeset(0): 640x480@60Hz
[    15.234] (II) modeset(0): 800x600@60Hz
[    15.234] (II) modeset(0): 1024x768@60Hz
[    15.234] (II) modeset(0): Manufacturer's mask: 0
[    15.234] (II) modeset(0): Supported standard timings:
[    15.234] (II) modeset(0): #0: hsize: 640  vsize 480  refresh: 60  vid: 16433
[    15.234] (II) modeset(0): #1: hsize: 800  vsize 600  refresh: 60  vid: 16453
[    15.234] (II) modeset(0): #2: hsize: 1024  vsize 768  refresh: 60  vid: 16481
[    15.234] (II) modeset(0): #3: hsize: 1152  vsize 864  refresh: 60  vid: 16497
[    15.234] (II) modeset(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    15.234] (II) modeset(0): Supported detailed timing:
[    15.234] (II) modeset(0): clock: 594.0 MHz   Image Size:  1600 x 900 mm
[    15.234] (II) modeset(0): h_active: 3840  h_sync: 4016  h_sync_end 4104 h_blank_end 4400 h_border: 0
[    15.234] (II) modeset(0): v_active: 2160  v_sync: 2168  v_sync_end 2178 v_blanking: 2250 v_border: 0
[    15.234] (II) modeset(0): Supported detailed timing:
[    15.234] (II) modeset(0): clock: 148.5 MHz   Image Size:  1600 x 900 mm
[    15.234] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    15.234] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    15.234] (II) modeset(0): Ranges: V min: 58 V max: 62 Hz, H min: 30 H max: 136 kHz, PixClock max 605 MHz
[    15.234] (II) modeset(0): Monitor name: LG TV
[    15.234] (II) modeset(0): Supported detailed timing:
[    15.234] (II) modeset(0): clock: 74.2 MHz   Image Size:  1600 x 900 mm
[    15.234] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    15.234] (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    15.234] (II) modeset(0): Supported detailed timing:
[    15.234] (II) modeset(0): clock: 85.5 MHz   Image Size:  1600 x 900 mm
[    15.234] (II) modeset(0): h_active: 1360  h_sync: 1424  h_sync_end 1536 h_blank_end 1792 h_border: 0
[    15.234] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 795 v_border: 0
[    15.234] (II) modeset(0): Number of EDID sections to follow: 1
[    15.234] (II) modeset(0): EDID (in hex):
[    15.234] (II) modeset(0): 	00ffffffffffff001e6d010001010101
[    15.234] (II) modeset(0): 	011a010380a05a780aee91a3544c9926
[    15.234] (II) modeset(0): 	0f5054a1080031404540614071408180
[    15.234] (II) modeset(0): 	01010101010108e80030f2705a80b058
[    15.234] (II) modeset(0): 	8a0040846300001e023a801871382d40
[    15.234] (II) modeset(0): 	582c450040846300001e000000fd003a
[    15.234] (II) modeset(0): 	3e1e883c000a202020202020000000fc
[    15.234] (II) modeset(0): 	004c472054560a20202020202020019f
[    15.234] (II) modeset(0): 	02033cf1545d101f0413051403021220
[    15.234] (II) modeset(0): 	212215015e5f626364293d06c0150750
[    15.234] (II) modeset(0): 	0957076e030c002000b83c2000800102
[    15.234] (II) modeset(0): 	0304e50e60616566e3060501011d8018
[    15.234] (II) modeset(0): 	711c1620582c250040846300009e6621
[    15.234] (II) modeset(0): 	50b051001b304070360040846300001e
[    15.234] (II) modeset(0): 	00000000000000000000000000000000
[    15.234] (II) modeset(0): 	0000000000000000000000000000006b
[    15.234] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[    15.234] (II) modeset(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[    15.234] (II) modeset(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[    15.234] (II) modeset(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[    15.234] (II) modeset(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[    15.234] (II) modeset(0): Printing probed modes for output HDMI-1
[    15.234] (II) modeset(0): Modeline "4096x2160"x30.0  297.00  4096 4184 4272 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    15.234] (II) modeset(0): Modeline "4096x2160"x25.0  297.00  4096 5064 5152 5280  2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[    15.234] (II) modeset(0): Modeline "4096x2160"x24.0  297.00  4096 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[    15.234] (II) modeset(0): Modeline "4096x2160"x30.0  296.70  4096 4184 4272 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[    15.234] (II) modeset(0): Modeline "4096x2160"x24.0  296.70  4096 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[    15.234] (II) modeset(0): Modeline "3840x2160"x60.0  533.00  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.2 kHz d)
[    15.234] (II) modeset(0): Modeline "3840x2160"x30.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    15.234] (II) modeset(0): Modeline "3840x2160"x25.0  297.00  3840 4896 4984 5280  2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[    15.234] (II) modeset(0): Modeline "3840x2160"x24.0  297.00  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[    15.234] (II) modeset(0): Modeline "3840x2160"x30.0  296.70  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[    15.234] (II) modeset(0): Modeline "3840x2160"x24.0  296.70  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[    15.234] (II) modeset(0): Modeline "3200x1800"x60.0  492.00  3200 3456 3800 4400  1800 1803 1808 1865 -hsync +vsync (111.8 kHz d)
[    15.234] (II) modeset(0): Modeline "3200x1800"x59.9  373.00  3200 3248 3280 3360  1800 1803 1808 1852 +hsync -vsync (111.0 kHz d)
[    15.234] (II) modeset(0): Modeline "2880x1620"x60.0  396.25  2880 3096 3408 3936  1620 1623 1628 1679 -hsync +vsync (100.7 kHz d)
[    15.234] (II) modeset(0): Modeline "2880x1620"x60.0  303.75  2880 2928 2960 3040  1620 1623 1628 1666 +hsync -vsync (99.9 kHz d)
[    15.234] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2760 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz d)
[    15.234] (II) modeset(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz d)
[    15.234] (II) modeset(0): Modeline "2560x1440"x60.0  469.12  2560 2584 2600 2640  1440 1441 1444 1481 doublescan +hsync -vsync (177.7 kHz d)
[    15.234] (II) modeset(0): Modeline "2560x1440"x60.0  312.25  2560 2752 3024 3488  1440 1443 1448 1493 -hsync +vsync (89.5 kHz d)
[    15.234] (II) modeset(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz d)
[    15.234] (II) modeset(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    15.234] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    15.234] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    15.234] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    15.234] (II) modeset(0): Modeline "2048x1152"x60.0  406.50  2048 2220 2444 2840  1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d)
[    15.234] (II) modeset(0): Modeline "2048x1152"x60.0  302.50  2048 2072 2088 2128  1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d)
[    15.234] (II) modeset(0): Modeline "2048x1152"x59.9  197.00  2048 2184 2400 2752  1152 1155 1160 1195 -hsync +vsync (71.6 kHz d)
[    15.234] (II) modeset(0): Modeline "2048x1152"x59.9  156.75  2048 2096 2128 2208  1152 1155 1160 1185 +hsync -vsync (71.0 kHz d)
[    15.234] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz d)
[    15.234] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[    15.234] (II) modeset(0): Modeline "1920x1080"x60.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    15.234] (II) modeset(0): Modeline "1920x1080"x60.0  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    15.234] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    15.234] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    15.234] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    15.234] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    15.234] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    15.234] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    15.235] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    15.235] (II) modeset(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[    15.235] (II) modeset(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[    15.235] (II) modeset(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    15.235] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    15.235] (II) modeset(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[    15.235] (II) modeset(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    15.235] (II) modeset(0): Modeline "1600x1200"x70.0  189.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (87.5 kHz d)
[    15.235] (II) modeset(0): Modeline "1600x1200"x65.0  175.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
[    15.235] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    15.235] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    15.235] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    15.235] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    15.235] (II) modeset(0): Modeline "1600x900"x60.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    15.235] (II) modeset(0): Modeline "1600x900"x59.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    15.235] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    15.235] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    15.235] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    15.235] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    15.235] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    15.235] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    15.235] (II) modeset(0): Modeline "1440x810"x60.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    15.235] (II) modeset(0): Modeline "1440x810"x60.0  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    15.235] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    15.235] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    15.235] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    15.235] (II) modeset(0): Modeline "1280x800"x60.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    15.235] (II) modeset(0): Modeline "1280x800"x60.0  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    15.235] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    15.235] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    15.235] (II) modeset(0): Modeline "1152x864"x60.0   81.58  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[    15.235] (II) modeset(0): Modeline "1280x720"x60.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    15.235] (II) modeset(0): Modeline "1280x720"x60.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    15.235] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    15.235] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    15.235] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    15.235] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    15.235] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    15.235] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    15.235] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz d)
[    15.235] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    15.235] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    15.235] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    15.235] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    15.235] (II) modeset(0): Modeline "1024x576"x60.0   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    15.235] (II) modeset(0): Modeline "1024x576"x60.0   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    15.235] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    15.235] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    15.235] (II) modeset(0): Modeline "960x600"x59.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    15.235] (II) modeset(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    15.235] (II) modeset(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    15.235] (II) modeset(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    15.235] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    15.235] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    15.235] (II) modeset(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[    15.235] (II) modeset(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[    15.235] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    15.235] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    15.235] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    15.235] (II) modeset(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    15.235] (II) modeset(0): Modeline "840x525"x59.9   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    15.235] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    15.235] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    15.235] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    15.235] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    15.235] (II) modeset(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    15.235] (II) modeset(0): Modeline "800x450"x59.8   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    15.235] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    15.235] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    15.235] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    15.235] (II) modeset(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    15.235] (II) modeset(0): Modeline "700x450"x59.9   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    15.235] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    15.235] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.235] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    15.235] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    15.235] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    15.235] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    15.235] (II) modeset(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    15.235] (II) modeset(0): Modeline "684x384"x59.9   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    15.235] (II) modeset(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    15.235] (II) modeset(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    15.235] (II) modeset(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    15.235] (II) modeset(0): Modeline "640x360"x59.8   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    15.235] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    15.235] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    15.235] (II) modeset(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[    15.235] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    15.235] (II) modeset(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    15.235] (II) modeset(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    15.235] (II) modeset(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    15.235] (II) modeset(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    15.235] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    15.235] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    15.235] (II) modeset(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    15.235] (II) modeset(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    15.235] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    15.235] (II) modeset(0): Modeline "360x202"x59.5   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    15.235] (II) modeset(0): Modeline "360x202"x59.1   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    15.235] (II) modeset(0): Modeline "320x180"x59.8    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    15.235] (II) modeset(0): Modeline "320x180"x59.3    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    15.235] (II) modeset(0): Output DP-1 disconnected
[    15.235] (II) modeset(0): Output HDMI-1 connected
[    15.235] (II) modeset(0): Using exact sizes for initial modes
[    15.235] (II) modeset(0): Output HDMI-1 using initial mode 3840x2160 +0+0
[    15.235] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.235] (==) modeset(0): DPI set to (96, 96)
[    15.235] (II) Loading sub module "fb"
[    15.235] (II) LoadModule: "fb"
[    15.235] (II) Module "fb" already built-in
[    15.235] (II) UnloadModule: "vesa"
[    15.235] (II) Unloading vesa
[    15.552] (==) modeset(0): Backing store enabled
[    15.552] (==) modeset(0): Silken mouse enabled
[    15.567] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    15.567] (==) modeset(0): DPMS enabled
[    15.567] (II) modeset(0): [DRI2] Setup complete
[    15.567] (II) modeset(0): [DRI2]   DRI driver: nouveau
[    15.567] (II) modeset(0): [DRI2]   VDPAU driver: nouveau
[    15.567] (II) Initializing extension Generic Event Extension
[    15.567] (II) Initializing extension SHAPE
[    15.567] (II) Initializing extension MIT-SHM
[    15.567] (II) Initializing extension XInputExtension
[    15.567] (II) Initializing extension XTEST
[    15.568] (II) Initializing extension BIG-REQUESTS
[    15.568] (II) Initializing extension SYNC
[    15.568] (II) Initializing extension XKEYBOARD
[    15.568] (II) Initializing extension XC-MISC
[    15.568] (II) Initializing extension SECURITY
[    15.568] (II) Initializing extension XFIXES
[    15.568] (II) Initializing extension RENDER
[    15.568] (II) Initializing extension RANDR
[    15.568] (II) Initializing extension COMPOSITE
[    15.568] (II) Initializing extension DAMAGE
[    15.568] (II) Initializing extension MIT-SCREEN-SAVER
[    15.568] (II) Initializing extension DOUBLE-BUFFER
[    15.569] (II) Initializing extension RECORD
[    15.569] (II) Initializing extension DPMS
[    15.569] (II) Initializing extension Present
[    15.569] (II) Initializing extension DRI3
[    15.569] (II) Initializing extension X-Resource
[    15.569] (II) Initializing extension XVideo
[    15.569] (II) Initializing extension XVideo-MotionCompensation
[    15.569] (II) Initializing extension GLX
[    15.574] (II) AIGLX: Loaded and initialized nouveau
[    15.574] (II) GLX: Initialized DRI2 GL provider for screen 0
[    15.574] (II) Initializing extension XFree86-VidModeExtension
[    15.574] (II) Initializing extension XFree86-DGA
[    15.574] (II) Initializing extension XFree86-DRI
[    15.574] (II) Initializing extension DRI2
[    15.574] (II) modeset(0): Damage tracking initialized
[    15.574] (II) modeset(0): Setting screen physical size to 1016 x 571
[    15.767] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    15.767] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    15.767] (II) LoadModule: "libinput"
[    15.767] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    15.770] (II) Module libinput: vendor="X.Org Foundation"
[    15.770] 	compiled for 1.21.1.8, module version = 1.4.0
[    15.770] 	Module class: X.Org XInput Driver
[    15.770] 	ABI class: X.Org XInput driver, version 24.4
[    15.770] (II) Using input driver 'libinput' for 'Power Button'
[    15.771] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[    15.771] (**) Power Button: always reports core events
[    15.771] (**) Option "Device" "/dev/input/event1"
[    15.775] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    15.775] (II) event1  - Power Button: device is a keyboard
[    15.775] (II) event1  - Power Button: device removed
[    15.775] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    15.775] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    15.776] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    15.776] (II) event1  - Power Button: device is a keyboard
[    15.776] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    15.776] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    15.776] (II) Using input driver 'libinput' for 'Power Button'
[    15.777] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[    15.777] (**) Power Button: always reports core events
[    15.777] (**) Option "Device" "/dev/input/event0"
[    15.777] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    15.778] (II) event0  - Power Button: device is a keyboard
[    15.778] (II) event0  - Power Button: device removed
[    15.778] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    15.778] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    15.778] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    15.778] (II) event0  - Power Button: device is a keyboard
[    15.779] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control (/dev/input/event3)
[    15.779] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control: Applying InputClass "libinput keyboard catchall"
[    15.779] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control'
[    15.780] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 29 paused 0
[    15.780] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control: always reports core events
[    15.780] (**) Option "Device" "/dev/input/event3"
[    15.781] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: is tagged by udev as: Keyboard
[    15.781] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device is a keyboard
[    15.781] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device removed
[    15.781] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:2516:0051.0001/input/input3/event3"
[    15.781] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control" (type: KEYBOARD, id 8)
[    15.782] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: is tagged by udev as: Keyboard
[    15.782] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device is a keyboard
[    15.783] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control System Control (/dev/input/event4)
[    15.783] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: Applying InputClass "libinput keyboard catchall"
[    15.783] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control System Control'
[    15.784] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 30 paused 0
[    15.784] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: always reports core events
[    15.784] (**) Option "Device" "/dev/input/event4"
[    15.785] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: is tagged by udev as: Keyboard
[    15.785] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device is a keyboard
[    15.785] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device removed
[    15.785] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:2516:0051.0003/input/input4/event4"
[    15.785] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control System Control" (type: KEYBOARD, id 9)
[    15.786] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: is tagged by udev as: Keyboard
[    15.786] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device is a keyboard
[    15.787] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control (/dev/input/event5)
[    15.787] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: Applying InputClass "libinput keyboard catchall"
[    15.787] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control'
[    15.788] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 31 paused 0
[    15.788] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: always reports core events
[    15.788] (**) Option "Device" "/dev/input/event5"
[    15.789] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: is tagged by udev as: Keyboard
[    15.789] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device is a keyboard
[    15.789] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device removed
[    15.789] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:2516:0051.0003/input/input5/event5"
[    15.789] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control" (type: KEYBOARD, id 10)
[    15.790] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: is tagged by udev as: Keyboard
[    15.791] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device is a keyboard
[    15.791] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event18)
[    15.791] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    15.791] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[    15.792] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 32 paused 0
[    15.792] (**) Logitech USB Keyboard: always reports core events
[    15.792] (**) Option "Device" "/dev/input/event18"
[    15.793] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[    15.793] (II) event18 - Logitech USB Keyboard: device is a keyboard
[    15.793] (II) event18 - Logitech USB Keyboard: device removed
[    15.793] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.0/0003:046D:C31C.0004/input/input18/event18"
[    15.793] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[    15.795] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[    15.795] (II) event18 - Logitech USB Keyboard: device is a keyboard
[    15.796] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event19)
[    15.796] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    15.796] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[    15.796] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 33 paused 0
[    15.796] (**) Logitech USB Keyboard Consumer Control: always reports core events
[    15.796] (**) Option "Device" "/dev/input/event19"
[    15.798] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    15.798] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[    15.798] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[    15.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:046D:C31C.0005/input/input19/event19"
[    15.798] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 12)
[    15.799] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    15.799] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[    15.800] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event20)
[    15.800] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    15.800] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[    15.800] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 34 paused 0
[    15.801] (**) Logitech USB Keyboard System Control: always reports core events
[    15.801] (**) Option "Device" "/dev/input/event20"
[    15.802] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[    15.802] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[    15.802] (II) event20 - Logitech USB Keyboard System Control: device removed
[    15.802] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:046D:C31C.0005/input/input20/event20"
[    15.802] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 13)
[    15.803] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[    15.803] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[    15.804] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event21)
[    15.804] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall"
[    15.804] (II) Using input driver 'libinput' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[    15.860] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 35 paused 0
[    15.860] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[    15.860] (**) Option "Device" "/dev/input/event21"
[    15.862] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[    15.862] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[    15.862] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[    15.862] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[    15.862] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[    15.862] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[    15.862] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:045E:0040.0006/input/input21/event21"
[    15.862] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 14)
[    15.862] (**) Option "AccelerationScheme" "none"
[    15.862] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0
[    15.862] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[    15.862] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[    15.864] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[    15.864] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[    15.865] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[    15.865] (II) No input driver specified, ignoring this device.
[    15.865] (II) This device may have been added with another device file.
[    15.866] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event6)
[    15.866] (II) No input driver specified, ignoring this device.
[    15.866] (II) This device may have been added with another device file.
[    15.866] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[    15.866] (II) No input driver specified, ignoring this device.
[    15.866] (II) This device may have been added with another device file.
[    15.866] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[    15.866] (II) No input driver specified, ignoring this device.
[    15.866] (II) This device may have been added with another device file.
[    15.867] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[    15.867] (II) No input driver specified, ignoring this device.
[    15.867] (II) This device may have been added with another device file.
[    15.867] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event10)
[    15.867] (II) No input driver specified, ignoring this device.
[    15.867] (II) This device may have been added with another device file.
[    15.867] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event11)
[    15.867] (II) No input driver specified, ignoring this device.
[    15.867] (II) This device may have been added with another device file.
[    15.867] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event12)
[    15.867] (II) No input driver specified, ignoring this device.
[    15.867] (II) This device may have been added with another device file.
[    15.868] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event13)
[    15.868] (II) No input driver specified, ignoring this device.
[    15.868] (II) This device may have been added with another device file.
[    15.868] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event14)
[    15.868] (II) No input driver specified, ignoring this device.
[    15.868] (II) This device may have been added with another device file.
[    15.868] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event15)
[    15.868] (II) No input driver specified, ignoring this device.
[    15.868] (II) This device may have been added with another device file.
[    15.869] (II) config/udev: Adding input device HD-Audio Generic Line Out Side (/dev/input/event16)
[    15.869] (II) No input driver specified, ignoring this device.
[    15.869] (II) This device may have been added with another device file.
[    15.869] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event17)
[    15.869] (II) No input driver specified, ignoring this device.
[    15.869] (II) This device may have been added with another device file.
[    15.869] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    15.869] (II) No input driver specified, ignoring this device.
[    15.869] (II) This device may have been added with another device file.
[    16.724] (II) modeset(0): Disabling kernel dirty updates, not required.
[    16.751] (EE) Error loading keymap /tmp/server-0.xkm
[    16.802] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[  5743.859] (II) event18 - Logitech USB Keyboard: device removed
[  5743.861] (II) config/udev: removing device Logitech USB Keyboard
[  5743.861] (**) Option "fd" "32"
[  5743.863] (II) UnloadModule: "libinput"
[  5743.863] (II) systemd-logind: releasing fd for 13:82
[  5743.956] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  5743.958] (II) config/udev: removing device Logitech USB Keyboard Consumer Control
[  5743.958] (**) Option "fd" "33"
[  5743.960] (II) UnloadModule: "libinput"
[  5743.960] (II) systemd-logind: releasing fd for 13:83
[  5744.019] (II) event20 - Logitech USB Keyboard System Control: device removed
[  5744.021] (II) config/udev: removing device Logitech USB Keyboard System Control
[  5744.021] (**) Option "fd" "34"
[  5744.023] (II) UnloadModule: "libinput"
[  5744.023] (II) systemd-logind: releasing fd for 13:84
[  5744.149] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  5744.151] (II) config/udev: removing device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
[  5744.151] (**) Option "fd" "35"
[  5744.156] (II) UnloadModule: "libinput"
[  5744.156] (II) systemd-logind: releasing fd for 13:85
[  5750.313] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event19)
[  5750.313] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[  5750.313] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[  5750.314] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 33 paused 0
[  5750.314] (**) Logitech USB Keyboard Consumer Control: always reports core events
[  5750.314] (**) Option "Device" "/dev/input/event19"
[  5750.316] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  5750.316] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  5750.316] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  5750.316] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:046D:C31C.0008/input/input23/event19"
[  5750.316] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 11)
[  5750.318] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  5750.318] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  5750.337] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event18)
[  5750.337] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[  5750.337] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[  5750.338] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 35 paused 0
[  5750.338] (**) Logitech USB Keyboard: always reports core events
[  5750.338] (**) Option "Device" "/dev/input/event18"
[  5750.340] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  5750.340] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  5750.340] (II) event18 - Logitech USB Keyboard: device removed
[  5750.340] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.0/0003:046D:C31C.0007/input/input22/event18"
[  5750.340] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 12)
[  5750.342] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  5750.342] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  5750.343] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event20)
[  5750.343] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[  5750.343] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[  5750.343] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 63 paused 0
[  5750.343] (**) Logitech USB Keyboard System Control: always reports core events
[  5750.343] (**) Option "Device" "/dev/input/event20"
[  5750.345] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  5750.345] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  5750.345] (II) event20 - Logitech USB Keyboard System Control: device removed
[  5750.345] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:046D:C31C.0008/input/input24/event20"
[  5750.345] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 13)
[  5750.347] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  5750.347] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  5753.027] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[  5753.027] (II) No input driver specified, ignoring this device.
[  5753.027] (II) This device may have been added with another device file.
[  5753.166] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event21)
[  5753.166] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall"
[  5753.166] (II) Using input driver 'libinput' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[  5753.222] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 34 paused 0
[  5753.222] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[  5753.222] (**) Option "Device" "/dev/input/event21"
[  5753.225] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  5753.225] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  5753.226] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  5753.226] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  5753.226] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  5753.226] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  5753.226] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:045E:0040.0009/input/input25/event21"
[  5753.226] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 14)
[  5753.226] (**) Option "AccelerationScheme" "none"
[  5753.227] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0
[  5753.227] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[  5753.227] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[  5753.229] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  5753.230] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  5753.376] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  5753.377] (II) config/udev: removing device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
[  5753.377] (**) Option "fd" "34"
[  5753.381] (II) UnloadModule: "libinput"
[  5753.381] (II) systemd-logind: releasing fd for 13:85
[  5754.211] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[  5754.211] (II) No input driver specified, ignoring this device.
[  5754.211] (II) This device may have been added with another device file.
[  5754.335] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event21)
[  5754.335] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall"
[  5754.335] (II) Using input driver 'libinput' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[  5754.389] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 67 paused 0
[  5754.389] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[  5754.389] (**) Option "Device" "/dev/input/event21"
[  5754.390] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  5754.391] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  5754.391] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  5754.391] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  5754.391] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  5754.391] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  5754.391] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:045E:0040.000A/input/input26/event21"
[  5754.391] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 14)
[  5754.391] (**) Option "AccelerationScheme" "none"
[  5754.392] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0
[  5754.392] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[  5754.392] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[  5754.394] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  5754.394] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  9288.273] (II) event18 - Logitech USB Keyboard: device removed
[  9288.274] (II) config/udev: removing device Logitech USB Keyboard
[  9288.274] (**) Option "fd" "35"
[  9288.275] (II) UnloadModule: "libinput"
[  9288.275] (II) systemd-logind: releasing fd for 13:82
[  9288.402] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  9288.404] (II) config/udev: removing device Logitech USB Keyboard Consumer Control
[  9288.404] (**) Option "fd" "33"
[  9288.405] (II) UnloadModule: "libinput"
[  9288.405] (II) systemd-logind: releasing fd for 13:83
[  9288.439] (II) event20 - Logitech USB Keyboard System Control: device removed
[  9288.440] (II) config/udev: removing device Logitech USB Keyboard System Control
[  9288.440] (**) Option "fd" "63"
[  9288.442] (II) UnloadModule: "libinput"
[  9288.442] (II) systemd-logind: releasing fd for 13:84
[  9288.539] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  9288.541] (II) config/udev: removing device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
[  9288.541] (**) Option "fd" "67"
[  9288.545] (II) UnloadModule: "libinput"
[  9288.545] (II) systemd-logind: releasing fd for 13:85
[  9300.842] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[  9300.842] (II) No input driver specified, ignoring this device.
[  9300.842] (II) This device may have been added with another device file.
[  9300.907] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event20)
[  9300.907] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[  9300.907] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[  9300.907] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 35 paused 0
[  9300.907] (**) Logitech USB Keyboard System Control: always reports core events
[  9300.907] (**) Option "Device" "/dev/input/event20"
[  9300.909] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  9300.909] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  9300.909] (II) event20 - Logitech USB Keyboard System Control: device removed
[  9300.909] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:046D:C31C.000C/input/input29/event20"
[  9300.909] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 11)
[  9300.911] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  9300.911] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  9300.912] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event18)
[  9300.912] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[  9300.912] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[  9300.912] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 63 paused 0
[  9300.912] (**) Logitech USB Keyboard: always reports core events
[  9300.912] (**) Option "Device" "/dev/input/event18"
[  9300.914] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  9300.914] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  9300.914] (II) event18 - Logitech USB Keyboard: device removed
[  9300.914] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:046D:C31C.000B/input/input27/event18"
[  9300.914] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 12)
[  9300.916] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  9300.916] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  9300.917] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event19)
[  9300.917] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[  9300.917] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[  9300.917] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 66 paused 0
[  9300.917] (**) Logitech USB Keyboard Consumer Control: always reports core events
[  9300.917] (**) Option "Device" "/dev/input/event19"
[  9300.919] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  9300.919] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  9300.919] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  9300.919] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:046D:C31C.000C/input/input28/event19"
[  9300.919] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 13)
[  9300.921] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  9300.921] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  9300.944] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event21)
[  9300.944] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall"
[  9300.944] (II) Using input driver 'libinput' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[  9300.999] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 33 paused 0
[  9300.999] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[  9300.999] (**) Option "Device" "/dev/input/event21"
[  9301.000] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  9301.000] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  9301.000] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  9301.000] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  9301.000] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  9301.000] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  9301.000] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:045E:0040.000D/input/input30/event21"
[  9301.000] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 14)
[  9301.001] (**) Option "AccelerationScheme" "none"
[  9301.001] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0
[  9301.001] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[  9301.001] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[  9301.004] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  9301.004] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  9559.833] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Enabling spurious button debouncing, see https://wayland.freedesktop.org/libinput/doc/1.25.0/button-debouncing.html for details

Xorg.0.log.old

[    18.785] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[    18.785] Current Operating System: Linux workstation 6.8.7-arch1-2 #1 SMP PREEMPT_DYNAMIC Fri, 19 Apr 2024 09:51:31 +0000 x86_64
[    18.785] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=80f8e3f3-51ff-4a07-a8c6-62a9a416466b rw loglevel=3 quiet
[    18.785]  
[    18.785] Current version of pixman: 0.43.4
[    18.785] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    18.785] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.785] (==) Log file: "/home/admin/.local/share/xorg/Xorg.0.log", Time: Wed May  1 22:47:37 2024
[    18.787] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.788] (==) No Layout section.  Using the first Screen section.
[    18.788] (==) No screen section available. Using defaults.
[    18.788] (**) |-->Screen "Default Screen Section" (0)
[    18.788] (**) |   |-->Monitor "<default monitor>"
[    18.788] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    18.788] (**) Allowing byte-swapped clients
[    18.788] (==) Automatically adding devices
[    18.788] (==) Automatically enabling devices
[    18.788] (==) Automatically adding GPU devices
[    18.788] (==) Automatically binding GPU devices
[    18.788] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    18.791] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    18.791] (==) ModulePath set to "/usr/lib/xorg/modules"
[    18.791] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.791] (II) Module ABI versions:
[    18.791] 	X.Org ANSI C Emulation: 0.4
[    18.791] 	X.Org Video Driver: 25.2
[    18.791] 	X.Org XInput driver : 24.4
[    18.791] 	X.Org Server Extension : 10.0
[    18.791] (++) using VT number 1

[    18.791] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    18.792] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    18.793] (II) xfree86: Adding drm device (/dev/dri/card0)
[    18.793] (II) Platform probe for /sys/devices/pci0000:00/0000:00:03.1/0000:1c:00.0/drm/card0
[    18.794] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[    18.801] (--) PCI:*(28@0:0:0) 10de:1d01:1043:8621 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[    18.802] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    18.802] (II) LoadModule: "glx"
[    18.802] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.804] (II) Module glx: vendor="X.Org Foundation"
[    18.804] 	compiled for 1.21.1.13, module version = 1.0.0
[    18.804] 	ABI class: X.Org Server Extension, version 10.0
[    18.804] (==) Matched nouveau as autoconfigured driver 0
[    18.804] (==) Matched nv as autoconfigured driver 1
[    18.804] (==) Matched modesetting as autoconfigured driver 2
[    18.804] (==) Matched fbdev as autoconfigured driver 3
[    18.804] (==) Matched vesa as autoconfigured driver 4
[    18.804] (==) Assigned the driver to the xf86ConfigLayout
[    18.804] (II) LoadModule: "nouveau"
[    18.805] (WW) Warning, couldn't open module nouveau
[    18.805] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    18.805] (II) LoadModule: "nv"
[    18.805] (WW) Warning, couldn't open module nv
[    18.805] (EE) Failed to load module "nv" (module does not exist, 0)
[    18.805] (II) LoadModule: "modesetting"
[    18.805] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.807] (II) Module modesetting: vendor="X.Org Foundation"
[    18.807] 	compiled for 1.21.1.13, module version = 1.21.1
[    18.807] 	Module class: X.Org Video Driver
[    18.807] 	ABI class: X.Org Video Driver, version 25.2
[    18.807] (II) LoadModule: "fbdev"
[    18.807] (WW) Warning, couldn't open module fbdev
[    18.807] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    18.807] (II) LoadModule: "vesa"
[    18.807] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    18.807] (II) Module vesa: vendor="X.Org Foundation"
[    18.807] 	compiled for 1.21.1.11, module version = 2.6.0
[    18.807] 	Module class: X.Org Video Driver
[    18.807] 	ABI class: X.Org Video Driver, version 25.2
[    18.807] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    18.807] (II) VESA: driver for VESA chipsets: vesa
[    18.807] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[    18.807] (II) modeset(0): using drv /dev/dri/card0
[    18.807] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    18.807] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    18.807] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    18.807] (==) modeset(0): RGB weight 888
[    18.807] (==) modeset(0): Default visual is TrueColor
[    18.807] (II) Loading sub module "glamoregl"
[    18.807] (II) LoadModule: "glamoregl"
[    18.807] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    18.811] (II) Module glamoregl: vendor="X.Org Foundation"
[    18.811] 	compiled for 1.21.1.13, module version = 1.0.1
[    18.811] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    19.611] (II) modeset(0): glamor X acceleration enabled on NV138
[    19.611] (II) modeset(0): glamor initialized
[    19.611] (==) modeset(0): VariableRefresh: disabled
[    19.611] (==) modeset(0): AsyncFlipSecondaries: disabled
[    19.611] (II) modeset(0): Output DP-1 has no monitor section
[    19.685] (II) modeset(0): Output HDMI-1 has no monitor section
[    19.685] (II) modeset(0): EDID for output DP-1
[    19.759] (II) modeset(0): EDID for output HDMI-1
[    19.759] (II) modeset(0): Manufacturer: GSM  Model: 1  Serial#: 16843009
[    19.759] (II) modeset(0): Year: 2016  Week: 1
[    19.759] (II) modeset(0): EDID Version: 1.3
[    19.759] (II) modeset(0): Digital Display Input
[    19.759] (II) modeset(0): Max Image Size [cm]: horiz.: 160  vert.: 90
[    19.759] (II) modeset(0): Gamma: 2.20
[    19.759] (II) modeset(0): No DPMS capabilities specified
[    19.759] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    19.759] (II) modeset(0): First detailed timing is preferred mode
[    19.759] (II) modeset(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    19.759] (II) modeset(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
[    19.759] (II) modeset(0): Supported established timings:
[    19.759] (II) modeset(0): 720x400@70Hz
[    19.759] (II) modeset(0): 640x480@60Hz
[    19.759] (II) modeset(0): 800x600@60Hz
[    19.759] (II) modeset(0): 1024x768@60Hz
[    19.759] (II) modeset(0): Manufacturer's mask: 0
[    19.759] (II) modeset(0): Supported standard timings:
[    19.759] (II) modeset(0): #0: hsize: 640  vsize 480  refresh: 60  vid: 16433
[    19.759] (II) modeset(0): #1: hsize: 800  vsize 600  refresh: 60  vid: 16453
[    19.759] (II) modeset(0): #2: hsize: 1024  vsize 768  refresh: 60  vid: 16481
[    19.759] (II) modeset(0): #3: hsize: 1152  vsize 864  refresh: 60  vid: 16497
[    19.759] (II) modeset(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    19.759] (II) modeset(0): Supported detailed timing:
[    19.759] (II) modeset(0): clock: 594.0 MHz   Image Size:  1600 x 900 mm
[    19.759] (II) modeset(0): h_active: 3840  h_sync: 4016  h_sync_end 4104 h_blank_end 4400 h_border: 0
[    19.759] (II) modeset(0): v_active: 2160  v_sync: 2168  v_sync_end 2178 v_blanking: 2250 v_border: 0
[    19.759] (II) modeset(0): Supported detailed timing:
[    19.759] (II) modeset(0): clock: 148.5 MHz   Image Size:  1600 x 900 mm
[    19.759] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    19.759] (II) modeset(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    19.759] (II) modeset(0): Ranges: V min: 58 V max: 62 Hz, H min: 30 H max: 136 kHz, PixClock max 605 MHz
[    19.759] (II) modeset(0): Monitor name: LG TV
[    19.759] (II) modeset(0): Supported detailed timing:
[    19.759] (II) modeset(0): clock: 74.2 MHz   Image Size:  1600 x 900 mm
[    19.759] (II) modeset(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    19.759] (II) modeset(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[    19.759] (II) modeset(0): Supported detailed timing:
[    19.759] (II) modeset(0): clock: 85.5 MHz   Image Size:  1600 x 900 mm
[    19.759] (II) modeset(0): h_active: 1360  h_sync: 1424  h_sync_end 1536 h_blank_end 1792 h_border: 0
[    19.759] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 795 v_border: 0
[    19.759] (II) modeset(0): Number of EDID sections to follow: 1
[    19.759] (II) modeset(0): EDID (in hex):
[    19.759] (II) modeset(0): 	00ffffffffffff001e6d010001010101
[    19.759] (II) modeset(0): 	011a010380a05a780aee91a3544c9926
[    19.759] (II) modeset(0): 	0f5054a1080031404540614071408180
[    19.759] (II) modeset(0): 	01010101010108e80030f2705a80b058
[    19.759] (II) modeset(0): 	8a0040846300001e023a801871382d40
[    19.759] (II) modeset(0): 	582c450040846300001e000000fd003a
[    19.759] (II) modeset(0): 	3e1e883c000a202020202020000000fc
[    19.759] (II) modeset(0): 	004c472054560a20202020202020019f
[    19.759] (II) modeset(0): 	02033cf1545d101f0413051403021220
[    19.759] (II) modeset(0): 	212215015e5f626364293d06c0150750
[    19.759] (II) modeset(0): 	0957076e030c002000b83c2000800102
[    19.759] (II) modeset(0): 	0304e50e60616566e3060501011d8018
[    19.759] (II) modeset(0): 	711c1620582c250040846300009e6621
[    19.759] (II) modeset(0): 	50b051001b304070360040846300001e
[    19.759] (II) modeset(0): 	00000000000000000000000000000000
[    19.759] (II) modeset(0): 	0000000000000000000000000000006b
[    19.759] (--) modeset(0): HDMI max TMDS frequency 300000KHz
[    19.759] (II) modeset(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[    19.759] (II) modeset(0): Not using default mode "2560x1440" (bad mode clock/interlace/doublescan)
[    19.759] (II) modeset(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[    19.759] (II) modeset(0): Not using default mode "3840x2160" (bad mode clock/interlace/doublescan)
[    19.759] (II) modeset(0): Printing probed modes for output HDMI-1
[    19.759] (II) modeset(0): Modeline "4096x2160"x30.0  297.00  4096 4184 4272 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    19.759] (II) modeset(0): Modeline "4096x2160"x25.0  297.00  4096 5064 5152 5280  2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[    19.759] (II) modeset(0): Modeline "4096x2160"x24.0  297.00  4096 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[    19.759] (II) modeset(0): Modeline "4096x2160"x30.0  296.70  4096 4184 4272 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[    19.759] (II) modeset(0): Modeline "4096x2160"x24.0  296.70  4096 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[    19.759] (II) modeset(0): Modeline "3840x2160"x60.0  533.00  3840 3888 3920 4000  2160 2163 2168 2222 +hsync -vsync (133.2 kHz d)
[    19.759] (II) modeset(0): Modeline "3840x2160"x30.0  297.00  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.5 kHz e)
[    19.759] (II) modeset(0): Modeline "3840x2160"x25.0  297.00  3840 4896 4984 5280  2160 2168 2178 2250 +hsync +vsync (56.2 kHz e)
[    19.759] (II) modeset(0): Modeline "3840x2160"x24.0  297.00  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (54.0 kHz e)
[    19.759] (II) modeset(0): Modeline "3840x2160"x30.0  296.70  3840 4016 4104 4400  2160 2168 2178 2250 +hsync +vsync (67.4 kHz e)
[    19.759] (II) modeset(0): Modeline "3840x2160"x24.0  296.70  3840 5116 5204 5500  2160 2168 2178 2250 +hsync +vsync (53.9 kHz e)
[    19.759] (II) modeset(0): Modeline "3200x1800"x60.0  492.00  3200 3456 3800 4400  1800 1803 1808 1865 -hsync +vsync (111.8 kHz d)
[    19.759] (II) modeset(0): Modeline "3200x1800"x59.9  373.00  3200 3248 3280 3360  1800 1803 1808 1852 +hsync -vsync (111.0 kHz d)
[    19.759] (II) modeset(0): Modeline "2880x1620"x60.0  396.25  2880 3096 3408 3936  1620 1623 1628 1679 -hsync +vsync (100.7 kHz d)
[    19.759] (II) modeset(0): Modeline "2880x1620"x60.0  303.75  2880 2928 2960 3040  1620 1623 1628 1666 +hsync -vsync (99.9 kHz d)
[    19.759] (II) modeset(0): Modeline "2560x1600"x60.0  348.50  2560 2760 3032 3504  1600 1603 1609 1658 -hsync +vsync (99.5 kHz d)
[    19.759] (II) modeset(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz d)
[    19.759] (II) modeset(0): Modeline "2560x1440"x60.0  469.12  2560 2584 2600 2640  1440 1441 1444 1481 doublescan +hsync -vsync (177.7 kHz d)
[    19.759] (II) modeset(0): Modeline "2560x1440"x60.0  312.25  2560 2752 3024 3488  1440 1443 1448 1493 -hsync +vsync (89.5 kHz d)
[    19.759] (II) modeset(0): Modeline "2560x1440"x60.0  241.50  2560 2608 2640 2720  1440 1443 1448 1481 +hsync -vsync (88.8 kHz d)
[    19.759] (II) modeset(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    19.759] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    19.759] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    19.759] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    19.759] (II) modeset(0): Modeline "2048x1152"x60.0  406.50  2048 2220 2444 2840  1152 1153 1156 1193 doublescan -hsync +vsync (143.1 kHz d)
[    19.759] (II) modeset(0): Modeline "2048x1152"x60.0  302.50  2048 2072 2088 2128  1152 1153 1156 1185 doublescan +hsync -vsync (142.2 kHz d)
[    19.759] (II) modeset(0): Modeline "2048x1152"x59.9  197.00  2048 2184 2400 2752  1152 1155 1160 1195 -hsync +vsync (71.6 kHz d)
[    19.759] (II) modeset(0): Modeline "2048x1152"x59.9  156.75  2048 2096 2128 2208  1152 1155 1160 1185 +hsync -vsync (71.0 kHz d)
[    19.759] (II) modeset(0): Modeline "1920x1200"x59.9  193.25  1920 2056 2256 2592  1200 1203 1209 1245 -hsync +vsync (74.6 kHz d)
[    19.759] (II) modeset(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz d)
[    19.759] (II) modeset(0): Modeline "1920x1080"x60.0  356.38  1920 2080 2288 2656  1080 1081 1084 1118 doublescan -hsync +vsync (134.2 kHz d)
[    19.759] (II) modeset(0): Modeline "1920x1080"x60.0  266.50  1920 1944 1960 2000  1080 1081 1084 1111 doublescan +hsync -vsync (133.2 kHz d)
[    19.759] (II) modeset(0): Modeline "1920x1080"x60.0  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync (67.2 kHz d)
[    19.759] (II) modeset(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[    19.759] (II) modeset(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080"x30.0   74.25  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.8 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080"x30.0   74.18  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (33.7 kHz e)
[    19.759] (II) modeset(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    19.759] (II) modeset(0): Modeline "1600x1200"x70.0  189.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (87.5 kHz d)
[    19.759] (II) modeset(0): Modeline "1600x1200"x65.0  175.50  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
[    19.759] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    19.759] (II) modeset(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[    19.759] (II) modeset(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[    19.759] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    19.759] (II) modeset(0): Modeline "1600x900"x60.0  246.00  1600 1728 1900 2200  900 901 904 932 doublescan -hsync +vsync (111.8 kHz d)
[    19.759] (II) modeset(0): Modeline "1600x900"x59.9  186.50  1600 1624 1640 1680  900 901 904 926 doublescan +hsync -vsync (111.0 kHz d)
[    19.759] (II) modeset(0): Modeline "1600x900"x59.9  118.25  1600 1696 1856 2112  900 903 908 934 -hsync +vsync (56.0 kHz d)
[    19.759] (II) modeset(0): Modeline "1600x900"x59.8   97.50  1600 1648 1680 1760  900 903 908 926 +hsync -vsync (55.4 kHz d)
[    19.759] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    19.759] (II) modeset(0): Modeline "1400x900"x60.0  103.50  1400 1480 1624 1848  900 903 913 934 -hsync +vsync (56.0 kHz d)
[    19.759] (II) modeset(0): Modeline "1400x900"x59.9   86.50  1400 1448 1480 1560  900 903 913 926 +hsync -vsync (55.4 kHz d)
[    19.759] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    19.759] (II) modeset(0): Modeline "1440x810"x60.0  198.12  1440 1548 1704 1968  810 811 814 839 doublescan -hsync +vsync (100.7 kHz d)
[    19.759] (II) modeset(0): Modeline "1440x810"x60.0  151.88  1440 1464 1480 1520  810 811 814 833 doublescan +hsync -vsync (99.9 kHz d)
[    19.759] (II) modeset(0): Modeline "1368x768"x59.9   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync (47.8 kHz d)
[    19.759] (II) modeset(0): Modeline "1368x768"x59.9   72.25  1368 1416 1448 1528  768 771 781 790 +hsync -vsync (47.3 kHz d)
[    19.759] (II) modeset(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[    19.759] (II) modeset(0): Modeline "1280x800"x60.0  174.25  1280 1380 1516 1752  800 801 804 829 doublescan -hsync +vsync (99.5 kHz d)
[    19.759] (II) modeset(0): Modeline "1280x800"x60.0  134.25  1280 1304 1320 1360  800 801 804 823 doublescan +hsync -vsync (98.7 kHz d)
[    19.759] (II) modeset(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz d)
[    19.759] (II) modeset(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 +hsync -vsync (49.3 kHz d)
[    19.759] (II) modeset(0): Modeline "1152x864"x60.0   81.58  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[    19.759] (II) modeset(0): Modeline "1280x720"x60.0  156.12  1280 1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    19.759] (II) modeset(0): Modeline "1280x720"x60.0  120.75  1280 1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    19.759] (II) modeset(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    19.759] (II) modeset(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    19.759] (II) modeset(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    19.759] (II) modeset(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    19.759] (II) modeset(0): Modeline "1280x720"x59.7   63.75  1280 1328 1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    19.759] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    19.759] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz d)
[    19.759] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.759] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    19.759] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    19.759] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    19.759] (II) modeset(0): Modeline "1024x576"x60.0   98.50  1024 1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    19.759] (II) modeset(0): Modeline "1024x576"x60.0   78.38  1024 1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    19.759] (II) modeset(0): Modeline "1024x576"x59.9   46.50  1024 1064 1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    19.759] (II) modeset(0): Modeline "1024x576"x59.8   42.00  1024 1072 1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    19.759] (II) modeset(0): Modeline "960x600"x59.9   96.62  960 1028 1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    19.759] (II) modeset(0): Modeline "960x600"x60.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    19.759] (II) modeset(0): Modeline "960x540"x60.0   86.50  960 1024 1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    19.759] (II) modeset(0): Modeline "960x540"x60.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    19.759] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992 1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    19.759] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008 1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    19.759] (II) modeset(0): Modeline "800x600"x70.0   94.50  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[    19.759] (II) modeset(0): Modeline "800x600"x65.0   87.75  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[    19.759] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    19.759] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.759] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    19.759] (II) modeset(0): Modeline "840x525"x60.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    19.759] (II) modeset(0): Modeline "840x525"x59.9   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    19.759] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888 968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    19.759] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912 944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    19.759] (II) modeset(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    19.759] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    19.759] (II) modeset(0): Modeline "800x450"x59.9   59.12  800 848 928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    19.759] (II) modeset(0): Modeline "800x450"x59.8   48.75  800 824 840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    19.759] (II) modeset(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    19.759] (II) modeset(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    19.759] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    19.759] (II) modeset(0): Modeline "700x450"x60.0   51.75  700 740 812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    19.759] (II) modeset(0): Modeline "700x450"x59.9   43.25  700 724 740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    19.759] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    19.759] (II) modeset(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    19.759] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    19.759] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744 808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    19.759] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768 800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    19.759] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    19.759] (II) modeset(0): Modeline "684x384"x59.9   42.62  684 720 788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    19.759] (II) modeset(0): Modeline "684x384"x59.9   36.12  684 708 724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    19.759] (II) modeset(0): Modeline "640x400"x59.9   41.75  640 676 740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    19.759] (II) modeset(0): Modeline "640x400"x60.0   35.50  640 664 680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    19.759] (II) modeset(0): Modeline "640x360"x59.9   37.25  640 672 736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    19.759] (II) modeset(0): Modeline "640x360"x59.8   31.88  640 664 680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    19.759] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664 720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    19.759] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688 720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    19.759] (II) modeset(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[    19.759] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    19.759] (II) modeset(0): Modeline "512x288"x60.0   23.25  512 532 580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    19.759] (II) modeset(0): Modeline "512x288"x59.9   21.00  512 536 552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    19.759] (II) modeset(0): Modeline "480x270"x59.6   20.38  480 496 544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    19.759] (II) modeset(0): Modeline "480x270"x59.8   18.62  480 504 520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    19.759] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    19.759] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    19.759] (II) modeset(0): Modeline "432x243"x59.9   16.25  432 444 484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    19.759] (II) modeset(0): Modeline "432x243"x59.6   15.25  432 456 472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    19.759] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    19.759] (II) modeset(0): Modeline "360x202"x59.5   11.25  360 372 404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    19.759] (II) modeset(0): Modeline "360x202"x59.1   10.88  360 384 400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    19.759] (II) modeset(0): Modeline "320x180"x59.8    9.00  320 332 360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    19.759] (II) modeset(0): Modeline "320x180"x59.3    8.88  320 344 360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    19.759] (II) modeset(0): Output DP-1 disconnected
[    19.759] (II) modeset(0): Output HDMI-1 connected
[    19.759] (II) modeset(0): Using exact sizes for initial modes
[    19.759] (II) modeset(0): Output HDMI-1 using initial mode 3840x2160 +0+0
[    19.759] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    19.759] (==) modeset(0): DPI set to (96, 96)
[    19.759] (II) Loading sub module "fb"
[    19.760] (II) LoadModule: "fb"
[    19.760] (II) Module "fb" already built-in
[    19.760] (II) UnloadModule: "vesa"
[    19.760] (II) Unloading vesa
[    20.055] (==) modeset(0): Backing store enabled
[    20.055] (==) modeset(0): Silken mouse enabled
[    20.056] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    20.056] (==) modeset(0): DPMS enabled
[    20.056] (II) modeset(0): [DRI2] Setup complete
[    20.056] (II) modeset(0): [DRI2]   DRI driver: nouveau
[    20.056] (II) modeset(0): [DRI2]   VDPAU driver: nouveau
[    20.056] (II) Initializing extension Generic Event Extension
[    20.056] (II) Initializing extension SHAPE
[    20.056] (II) Initializing extension MIT-SHM
[    20.056] (II) Initializing extension XInputExtension
[    20.056] (II) Initializing extension XTEST
[    20.057] (II) Initializing extension BIG-REQUESTS
[    20.057] (II) Initializing extension SYNC
[    20.057] (II) Initializing extension XKEYBOARD
[    20.057] (II) Initializing extension XC-MISC
[    20.057] (II) Initializing extension SECURITY
[    20.057] (II) Initializing extension XFIXES
[    20.057] (II) Initializing extension RENDER
[    20.057] (II) Initializing extension RANDR
[    20.057] (II) Initializing extension COMPOSITE
[    20.057] (II) Initializing extension DAMAGE
[    20.057] (II) Initializing extension MIT-SCREEN-SAVER
[    20.057] (II) Initializing extension DOUBLE-BUFFER
[    20.057] (II) Initializing extension RECORD
[    20.057] (II) Initializing extension DPMS
[    20.057] (II) Initializing extension Present
[    20.057] (II) Initializing extension DRI3
[    20.058] (II) Initializing extension X-Resource
[    20.058] (II) Initializing extension XVideo
[    20.058] (II) Initializing extension XVideo-MotionCompensation
[    20.058] (II) Initializing extension GLX
[    20.061] (II) AIGLX: Loaded and initialized nouveau
[    20.061] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.061] (II) Initializing extension XFree86-VidModeExtension
[    20.061] (II) Initializing extension XFree86-DGA
[    20.061] (II) Initializing extension XFree86-DRI
[    20.061] (II) Initializing extension DRI2
[    20.062] (II) modeset(0): Damage tracking initialized
[    20.062] (II) modeset(0): Setting screen physical size to 1016 x 571
[    20.258] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    20.258] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    20.258] (II) LoadModule: "libinput"
[    20.258] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    20.261] (II) Module libinput: vendor="X.Org Foundation"
[    20.261] 	compiled for 1.21.1.8, module version = 1.4.0
[    20.261] 	Module class: X.Org XInput Driver
[    20.261] 	ABI class: X.Org XInput driver, version 24.4
[    20.261] (II) Using input driver 'libinput' for 'Power Button'
[    20.261] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 25 paused 0
[    20.261] (**) Power Button: always reports core events
[    20.261] (**) Option "Device" "/dev/input/event1"
[    20.266] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    20.266] (II) event1  - Power Button: device is a keyboard
[    20.266] (II) event1  - Power Button: device removed
[    20.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    20.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.267] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    20.267] (II) event1  - Power Button: device is a keyboard
[    20.267] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    20.267] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    20.267] (II) Using input driver 'libinput' for 'Power Button'
[    20.268] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[    20.268] (**) Power Button: always reports core events
[    20.268] (**) Option "Device" "/dev/input/event0"
[    20.269] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    20.269] (II) event0  - Power Button: device is a keyboard
[    20.269] (II) event0  - Power Button: device removed
[    20.269] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    20.269] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    20.269] (II) event0  - Power Button: is tagged by udev as: Keyboard
[    20.269] (II) event0  - Power Button: device is a keyboard
[    20.270] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control (/dev/input/event3)
[    20.270] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control: Applying InputClass "libinput keyboard catchall"
[    20.270] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control'
[    20.271] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 29 paused 0
[    20.271] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control: always reports core events
[    20.271] (**) Option "Device" "/dev/input/event3"
[    20.272] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: is tagged by udev as: Keyboard
[    20.272] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device is a keyboard
[    20.273] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device removed
[    20.273] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:2516:0051.0001/input/input3/event3"
[    20.273] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control" (type: KEYBOARD, id 8)
[    20.274] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: is tagged by udev as: Keyboard
[    20.274] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device is a keyboard
[    20.275] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control System Control (/dev/input/event4)
[    20.275] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: Applying InputClass "libinput keyboard catchall"
[    20.275] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control System Control'
[    20.276] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 30 paused 0
[    20.276] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: always reports core events
[    20.276] (**) Option "Device" "/dev/input/event4"
[    20.277] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: is tagged by udev as: Keyboard
[    20.277] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device is a keyboard
[    20.277] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device removed
[    20.277] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:2516:0051.0003/input/input4/event4"
[    20.277] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control System Control" (type: KEYBOARD, id 9)
[    20.278] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: is tagged by udev as: Keyboard
[    20.278] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device is a keyboard
[    20.279] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control (/dev/input/event5)
[    20.279] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: Applying InputClass "libinput keyboard catchall"
[    20.279] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control'
[    20.280] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 31 paused 0
[    20.280] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: always reports core events
[    20.280] (**) Option "Device" "/dev/input/event5"
[    20.282] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: is tagged by udev as: Keyboard
[    20.282] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device is a keyboard
[    20.282] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device removed
[    20.282] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:2516:0051.0003/input/input5/event5"
[    20.282] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control" (type: KEYBOARD, id 10)
[    20.283] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: is tagged by udev as: Keyboard
[    20.283] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device is a keyboard
[    20.284] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event18)
[    20.284] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[    20.284] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[    20.285] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 32 paused 0
[    20.285] (**) Logitech USB Keyboard: always reports core events
[    20.285] (**) Option "Device" "/dev/input/event18"
[    20.286] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[    20.286] (II) event18 - Logitech USB Keyboard: device is a keyboard
[    20.286] (II) event18 - Logitech USB Keyboard: device removed
[    20.286] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.0/0003:046D:C31C.0004/input/input18/event18"
[    20.286] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[    20.288] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[    20.288] (II) event18 - Logitech USB Keyboard: device is a keyboard
[    20.289] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event19)
[    20.289] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    20.289] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[    20.290] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 33 paused 0
[    20.290] (**) Logitech USB Keyboard Consumer Control: always reports core events
[    20.290] (**) Option "Device" "/dev/input/event19"
[    20.291] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    20.291] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[    20.292] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[    20.292] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:046D:C31C.0005/input/input19/event19"
[    20.292] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 12)
[    20.293] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[    20.293] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[    20.294] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event20)
[    20.294] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    20.294] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[    20.295] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 34 paused 0
[    20.295] (**) Logitech USB Keyboard System Control: always reports core events
[    20.295] (**) Option "Device" "/dev/input/event20"
[    20.296] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[    20.296] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[    20.296] (II) event20 - Logitech USB Keyboard System Control: device removed
[    20.296] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.1/1-9.1:1.1/0003:046D:C31C.0005/input/input20/event20"
[    20.296] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 13)
[    20.298] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[    20.298] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[    20.298] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event21)
[    20.298] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall"
[    20.298] (II) Using input driver 'libinput' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[    20.357] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 35 paused 0
[    20.357] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[    20.357] (**) Option "Device" "/dev/input/event21"
[    20.358] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[    20.358] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[    20.358] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[    20.358] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[    20.358] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[    20.358] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[    20.358] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:045E:0040.0006/input/input21/event21"
[    20.358] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 14)
[    20.359] (**) Option "AccelerationScheme" "none"
[    20.359] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0
[    20.359] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[    20.359] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[    20.360] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[    20.360] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[    20.361] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[    20.361] (II) No input driver specified, ignoring this device.
[    20.361] (II) This device may have been added with another device file.
[    20.361] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event6)
[    20.361] (II) No input driver specified, ignoring this device.
[    20.361] (II) This device may have been added with another device file.
[    20.362] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[    20.362] (II) No input driver specified, ignoring this device.
[    20.362] (II) This device may have been added with another device file.
[    20.362] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[    20.362] (II) No input driver specified, ignoring this device.
[    20.362] (II) This device may have been added with another device file.
[    20.362] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[    20.362] (II) No input driver specified, ignoring this device.
[    20.362] (II) This device may have been added with another device file.
[    20.363] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event10)
[    20.363] (II) No input driver specified, ignoring this device.
[    20.363] (II) This device may have been added with another device file.
[    20.363] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event11)
[    20.363] (II) No input driver specified, ignoring this device.
[    20.363] (II) This device may have been added with another device file.
[    20.363] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event12)
[    20.363] (II) No input driver specified, ignoring this device.
[    20.363] (II) This device may have been added with another device file.
[    20.364] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event13)
[    20.364] (II) No input driver specified, ignoring this device.
[    20.364] (II) This device may have been added with another device file.
[    20.364] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event14)
[    20.364] (II) No input driver specified, ignoring this device.
[    20.364] (II) This device may have been added with another device file.
[    20.364] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event15)
[    20.364] (II) No input driver specified, ignoring this device.
[    20.364] (II) This device may have been added with another device file.
[    20.365] (II) config/udev: Adding input device HD-Audio Generic Line Out Side (/dev/input/event16)
[    20.365] (II) No input driver specified, ignoring this device.
[    20.365] (II) This device may have been added with another device file.
[    20.365] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event17)
[    20.365] (II) No input driver specified, ignoring this device.
[    20.365] (II) This device may have been added with another device file.
[    20.365] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    20.365] (II) No input driver specified, ignoring this device.
[    20.365] (II) This device may have been added with another device file.
[    21.104] (II) modeset(0): Disabling kernel dirty updates, not required.
[    21.141] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[    21.180] (EE) Error loading keymap /tmp/server-0.xkm
[  2556.619] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Enabling spurious button debouncing, see https://wayland.freedesktop.org/libinput/doc/1.25.0/button-debouncing.html for details
[  3076.456] (**) Option "fd" "25"
[  3076.456] (II) event1  - Power Button: device removed
[  3076.456] (**) Option "fd" "28"
[  3076.456] (II) event0  - Power Button: device removed
[  3076.456] (**) Option "fd" "29"
[  3076.456] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device removed
[  3076.456] (**) Option "fd" "30"
[  3076.456] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device removed
[  3076.456] (**) Option "fd" "31"
[  3076.456] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device removed
[  3076.456] (**) Option "fd" "32"
[  3076.457] (II) event18 - Logitech USB Keyboard: device removed
[  3076.457] (**) Option "fd" "33"
[  3076.457] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  3076.457] (**) Option "fd" "34"
[  3076.457] (II) event20 - Logitech USB Keyboard System Control: device removed
[  3076.457] (**) Option "fd" "35"
[  3076.457] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  3076.457] (II) UnloadModule: "libinput"
[  3076.457] (II) systemd-logind: releasing fd for 13:85
[  3076.457] (II) UnloadModule: "libinput"
[  3076.457] (II) systemd-logind: releasing fd for 13:84
[  3076.458] (II) UnloadModule: "libinput"
[  3076.458] (II) systemd-logind: releasing fd for 13:83
[  3076.458] (II) UnloadModule: "libinput"
[  3076.458] (II) systemd-logind: releasing fd for 13:82
[  3076.458] (II) UnloadModule: "libinput"
[  3076.458] (II) systemd-logind: releasing fd for 13:69
[  3076.458] (II) UnloadModule: "libinput"
[  3076.458] (II) systemd-logind: releasing fd for 13:68
[  3076.459] (II) UnloadModule: "libinput"
[  3076.459] (II) systemd-logind: releasing fd for 13:67
[  3076.459] (II) UnloadModule: "libinput"
[  3076.459] (II) systemd-logind: releasing fd for 13:64
[  3076.459] (II) UnloadModule: "libinput"
[  3076.459] (II) systemd-logind: releasing fd for 13:65
[  3076.622] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[  3076.622] (WW) xf86OpenConsole: VT_GETSTATE failed: Input/output error
[  3076.740] (II) Server terminated successfully (0). Closing log file.

seth · 2024-05-02 12:45:40

Do you (still) have LIBGL_ALWAYS_SOFTWARE=1 exported (globally)?
Or did the previous error just fix itself?

You've a GeForce GT 1030 and are running the modesetting driver on the nouveau kernel module - do you intentionally not use the binary nvidia driver?

RedArcher · 2024-05-02 13:56:58

Yes, I have LIBGL_ALWAYS_SOFTWARE=1 exported at file .bashrc

# Blank HTML View on Xorg
export LIBGL_ALWAYS_SOFTWARE=1

I am sorry for neglecting to mention this.

are running the modesetting driver on the nouveau kernel module

What does it mean?

do you intentionally not use the binary nvidia driver?

I suppose I am, though I am open to any advise on that matter.

seth · 2024-05-02 14:15:47

https://wiki.archlinux.org/title/NVIDIA
Because of an ongoing bug w/ the 550xx drivers that seems to cause a corrupted kernel space (ie. kernel crashes) you might want to opt for https://aur.archlinux.org/packages/nvidia-535xx-dkms

Generally speaking, the nvidida binary drivers will outperform nouveau (and probably not cause these kind of GL errors) - the export in your bashrc means right now you're rendering everything on the CPU.

RedArcher · 2024-05-02 15:44:23

I have installed nvidia-535xx-utils after getting this message:

Cloning into 'nvidia-535xx-dkms'...
warning: You appear to have cloned an empty repository.
==> ERROR: PKGBUILD does not exist.

How do I enable that driver and disable nouveau?

V1del · 2024-05-02 17:04:29

the nvidia-535xx-utils package build will give you multiple packages one of them being the dkms variant, install all of them.. in effect:

sudo pacman -U nvidia-535xx-dkms nvidia-535xx-utils lib32-nvidia535xx-utils

(you'll have to give the actual file paths. make sure the header packages of the kernels you want to use are installed (e.g. linux-headers and/or linux-lts-headers) and friends.

If you've added the nvidia modules to your initramfs you might have to regenerate it, nouveau should get blacklisted by nvidia-535xx-utils.

seth · 2024-05-02 18:45:04

@RedArcher, you seem to have cloned the wrong git url.

git clone https://aur.archlinux.org/nvidia-535xx-utils.git

RedArcher · 2024-05-03 03:28:34

Seth, yes, because I have attempted to clone nvidia-535xx-dkms instead.

V1del, I have now installed linux-headers

# pacman -S linux-headers                                        
resolving dependencies...                                                                         
looking for conflicting packages...                                                               
                                                                                                  
Packages (2) pahole-1:1.26-2  linux-headers-6.8.8.arch1-1                                         
                                                                                                  
Total Download Size:    25.72 MiB                                                                 
Total Installed Size:  128.70 MiB                                                                 

:: Proceed with installation? [Y/n] 
:: Retrieving packages...
 linux-headers-6.8.8.arch...    25.4 MiB  1392 KiB/s 00:19 [################################] 100%
 pahole-1:1.26-2-x86_64        293.1 KiB  1694 KiB/s 00:00 [################################] 100%
 Total (2/2)                    25.7 MiB  1382 KiB/s 00:19 [################################] 100%
(2/2) checking keys in keyring                             [################################] 100%
(2/2) checking package integrity                           [################################] 100%
(2/2) loading package files                                [################################] 100%
(2/2) checking for file conflicts                          [################################] 100%
(2/2) checking available disk space                        [################################] 100%
:: Processing package changes...
(1/2) installing pahole                                    [################################] 100%
Optional dependencies for pahole
    ostra-cg: Generate call graphs from encoded traces
(2/2) installing linux-headers                             [################################] 100%
:: Running post-transaction hooks...
(1/4) Arming ConditionNeedsUpdate...
(2/4) Updating module dependencies...
(3/4) Install DKMS modules
==> dkms install --no-depmod nvidia/535.171.04 -k 6.8.8-arch1-1
==> dkms install --no-depmod v4l2loopback/0.13.1 -k 6.8.8-arch1-1
==> dkms install --no-depmod binder/1 -k 6.8.8-arch1-1
Error! Bad return status for module build on kernel: 6.8.8-arch1-1 (x86_64)
Consult /var/lib/dkms/binder/1/build/make.log for more information.
==> WARNING: `dkms install --no-depmod binder/1 -k 6.8.8-arch1-1' exited 10
==> depmod 6.8.8-arch1-1
(4/4) Refreshing py3status arch_updates module...

To inform you, I have restarted the machine, after building package nvidia-535xx-utils, and before I have read your posts.

The screen resolution has changed to the smallest resolution, as it appears.

xrandr returns None-1 which is not functional.

$ xrandr --listactivemonitors
Monitors: 1
 0: +*None-1 1024/271x768/203+0+0  None-1

$ xrandr --output None-1 --mode 1920x1080 --rate 60
xrandr: cannot find mode 1920x1080

Note: GTK+ HTML view works (tested with "Marker").

# pacman -U /home/lazarus/PKGBUILD/nvidia-535xx-utils/*zst
loading packages...
warning: nvidia-535xx-dkms-535.171.04-1 is up to date -- reinstalling
warning: nvidia-535xx-utils-535.171.04-1 is up to date -- reinstalling
warning: opencl-nvidia-535xx-535.171.04-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Packages (3) nvidia-535xx-dkms-535.171.04-1  nvidia-535xx-utils-535.171.04-1
             opencl-nvidia-535xx-535.171.04-1

Total Installed Size:  767.08 MiB
Net Upgrade Size:        0.00 MiB

:: Proceed with installation? [Y/n] 
(3/3) checking keys in keyring                             [################################] 100%
(3/3) checking package integrity                           [################################] 100%
(3/3) loading package files                                [################################] 100%
(3/3) checking for file conflicts                          [################################] 100%
(3/3) checking available disk space                        [################################] 100%
:: Running pre-transaction hooks...
(1/1) Remove upgraded DKMS modules
==> dkms remove --no-depmod nvidia/535.171.04 -k 6.8.8-arch1-1
:: Processing package changes...
(1/3) reinstalling nvidia-535xx-utils                      [################################] 100%
If you run into trouble with CUDA not being available, run nvidia-modprobe first.
If you use GDM on Wayland, you might have to run systemctl enable --now nvidia-resume.service
(2/3) reinstalling nvidia-535xx-dkms                       [################################] 100%
(3/3) reinstalling opencl-nvidia-535xx                     [################################] 100%
:: Running post-transaction hooks...
(1/8) Creating system user accounts...
(2/8) Reloading system manager configuration...
(3/8) Reloading device manager configuration...
(4/8) Arming ConditionNeedsUpdate...
(5/8) Install DKMS modules
==> dkms install --no-depmod nvidia/535.171.04 -k 6.8.8-arch1-1
==> depmod 6.8.8-arch1-1
(6/8) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
==> Using configuration file: '/etc/mkinitcpio.conf'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: '6.8.8-arch1-1'
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
  -> Running build hook: [mdadm_udev]
Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays.
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
==> Initcpio image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
==> Using configuration file: '/etc/mkinitcpio.conf'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: '6.8.8-arch1-1'
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'wd719x'
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
  -> Running build hook: [mdadm_udev]
Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays.
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
==> Initcpio image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
  -> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen.img
==> Starting build: '6.8.8-zen1-1-zen'
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
  -> Running build hook: [mdadm_udev]
Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays.
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-zen.img'
==> Initcpio image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'fallback'
==> Using default configuration file: '/etc/mkinitcpio.conf'
  -> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen-fallback.img -S autodetect
==> Starting build: '6.8.8-zen1-1-zen'
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'wd719x'
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
  -> Running build hook: [mdadm_udev]
Custom /etc/mdadm.conf file will be used in initramfs for assembling arrays.
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-zen-fallback.img'
==> Initcpio image generation successful
(7/8) Reloading system bus configuration...
(8/8) Refreshing py3status arch_updates module...

After a restart:

The resolution of i3 was set to its highest and monitor "HDMI-0" is recognized again.

$ xrandr --listmonitors
Monitors: 1
 0: +HDMI-0 3840/1600x2160/900+0+0  HDMI-0

$ xrandr --output HDMI-0 --mode 1920x1080 --rate 60

However, the issue remains and GTK+ HTML view is not rendered.

Note: LIBGL_ALWAYS_SOFTWARE=1 has been disabled (i.e. commented) in .bashrc

The following no longer work:

$ LIBGL_ALWAYS_SOFTWARE=1 marker

Last edited by RedArcher (2024-05-03 03:59:19)

RedArcher · 2024-05-03 03:57:51

I have joined my recent 3 posts into the post before these.

Please remove all posts and keep post ID 2168791

https://bbs.archlinux.org/viewtopic.php?pid=2168791#p2168791

Including this post

Last edited by RedArcher (2024-05-03 04:00:39)

seth · 2024-05-03 06:07:04

You've two kernels (linux and linux-zen) but only installed the headers for linux.

0: +*None-1 1024/271x768/203+0+0  None-1

This was the simpledrm device because nouveau was/is blacklisted but apparently the nvidia kernel module didn't load.

=> Please post your Xorg log, https://wiki.archlinux.org/title/Xorg#General and the output of

dkms status

to record the status quo

--
Fyi

Error! Bad return status for module build on kernel: 6.8.8-arch1-1 (x86_64)
Consult /var/lib/dkms/binder/1/build/make.log for more information.
==> WARNING: `dkms install --no-depmod binder/1 -k 6.8.8-arch1-1' exited 10

I guess this is https://aur.archlinux.org/packages/bind … x-dkms-git ?

RedArcher · 2024-05-03 06:36:30

$ grep -e Log -e tty .local/share/xXorg.0.log
xfce4/       xfdashboard/ xorg/        
[admin@workstation ~]$ grep -e Log -e tty .local/share/xorg/Xorg.0.log
[  1223.728] (==) Log file: "/home/lazarus/.local/share/xorg/Xorg.0.log", Time: Fri May  3 06:12:00 2024
[  1223.729] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  1223.885] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event18)
[  1223.885] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[  1223.885] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[  1223.886] (**) Logitech USB Keyboard: always reports core events
[  1223.887] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  1223.887] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  1223.887] (II) event18 - Logitech USB Keyboard: device removed
[  1223.887] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)                                                                  
[  1223.888] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard   
[  1223.889] (II) event18 - Logitech USB Keyboard: device is a keyboard             
[  1223.889] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event19)                                                          
[  1223.889] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"                                                              
[  1223.889] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'                                                                            
[  1223.890] (**) Logitech USB Keyboard Consumer Control: always reports core events
[  1223.891] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  1223.891] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  1223.892] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  1223.892] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 12)
[  1223.893] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  1223.893] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  1223.894] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event20)
[  1223.894] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[  1223.894] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[  1223.895] (**) Logitech USB Keyboard System Control: always reports core events
[  1223.896] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  1223.896] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  1223.896] (II) event20 - Logitech USB Keyboard System Control: device removed
[  1223.896] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 13)
[  1223.897] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  1223.897] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  2426.825] (II) config/udev: removing device Logitech USB Keyboard System Control
[  2426.825] (II) event20 - Logitech USB Keyboard System Control: device removed
[  2426.827] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event20)
[  2426.827] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[  2426.827] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[  2426.828] (**) Logitech USB Keyboard System Control: always reports core events
[  2426.830] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  2426.830] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  2426.830] (II) event20 - Logitech USB Keyboard System Control: device removed
[  2426.830] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 13)
[  2426.831] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  2426.832] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  2426.845] (II) config/udev: removing device Logitech USB Keyboard Consumer Control
[  2426.845] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  2426.846] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event19)
[  2426.846] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[  2426.846] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[  2426.847] (**) Logitech USB Keyboard Consumer Control: always reports core events
[  2426.848] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  2426.848] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  2426.849] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  2426.849] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 12)
[  2426.850] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  2426.850] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  2426.861] (II) config/udev: removing device Logitech USB Keyboard
[  2426.861] (II) event18 - Logitech USB Keyboard: device removed
[  2426.863] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event18)
[  2426.863] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[  2426.863] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[  2426.863] (**) Logitech USB Keyboard: always reports core events
[  2426.864] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  2426.865] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  2426.865] (II) event18 - Logitech USB Keyboard: device removed
[  2426.865] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[  2426.866] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  2426.866] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  2722.973] (II) event20 - Logitech USB Keyboard System Control: device removed
[  2722.973] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  2722.974] (II) event18 - Logitech USB Keyboard: device removed

$ dkms status
binder/1: added
nvidia/535.171.04, 6.8.8-arch1-1, x86_64: installed
v4l2loopback/0.13.1, 6.8.8-arch1-1, x86_64: installed

seth · 2024-05-03 06:39:41

No, the entire file - not the grep example in the wiki.
I just link that to tell you where to find the log.

RedArcher · 2024-05-03 06:54:17

Pardon.

[  1223.722] 
X.Org X Server 1.21.1.13
X Protocol Version 11, Revision 0
[  1223.724] Current Operating System: Linux workstation 6.8.8-arch1-1 #1 SMP PREEMPT_DYNAMIC Sun, 28 Apr 2024 15:59:47 +0000 x86_64
[  1223.724] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=80f8e3f3-51ff-4a07-a8c6-62a9a416466b rw loglevel=3 quiet
[  1223.725]  
[  1223.726] Current version of pixman: 0.43.4
[  1223.726] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1223.726] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1223.728] (==) Log file: "/home/admin/.local/share/xorg/Xorg.0.log", Time: Fri May  3 06:12:00 2024
[  1223.729] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1223.729] (==) No Layout section.  Using the first Screen section.
[  1223.729] (==) No screen section available. Using defaults.
[  1223.729] (**) |-->Screen "Default Screen Section" (0)
[  1223.729] (**) |   |-->Monitor "<default monitor>"
[  1223.729] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  1223.729] (**) Allowing byte-swapped clients
[  1223.729] (==) Automatically adding devices
[  1223.729] (==) Automatically enabling devices
[  1223.729] (==) Automatically adding GPU devices
[  1223.729] (==) Automatically binding GPU devices
[  1223.729] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1223.729] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[  1223.729] (==) ModulePath set to "/usr/lib/xorg/modules"
[  1223.729] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1223.729] (II) Module ABI versions:
[  1223.729] 	X.Org ANSI C Emulation: 0.4
[  1223.729] 	X.Org Video Driver: 25.2
[  1223.729] 	X.Org XInput driver : 24.4
[  1223.729] 	X.Org Server Extension : 10.0
[  1223.729] (++) using VT number 1

[  1223.729] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  1223.730] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[  1223.731] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1223.731] (II) Platform probe for /sys/devices/platform/simple-framebuffer.0/drm/card0
[  1223.731] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[  1223.735] (--) PCI:*(28@0:0:0) 10de:1d01:1043:8621 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[  1223.735] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  1223.735] (II) LoadModule: "glx"
[  1223.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  1223.736] (II) Module glx: vendor="X.Org Foundation"
[  1223.736] 	compiled for 1.21.1.13, module version = 1.0.0
[  1223.736] 	ABI class: X.Org Server Extension, version 10.0
[  1223.736] (==) Matched nouveau as autoconfigured driver 0
[  1223.736] (==) Matched nv as autoconfigured driver 1
[  1223.736] (==) Matched modesetting as autoconfigured driver 2
[  1223.736] (==) Matched fbdev as autoconfigured driver 3
[  1223.736] (==) Matched vesa as autoconfigured driver 4
[  1223.736] (==) Assigned the driver to the xf86ConfigLayout
[  1223.736] (II) LoadModule: "nouveau"
[  1223.737] (WW) Warning, couldn't open module nouveau
[  1223.737] (EE) Failed to load module "nouveau" (module does not exist, 0)
[  1223.737] (II) LoadModule: "nv"
[  1223.737] (WW) Warning, couldn't open module nv
[  1223.737] (EE) Failed to load module "nv" (module does not exist, 0)
[  1223.737] (II) LoadModule: "modesetting"
[  1223.737] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  1223.737] (II) Module modesetting: vendor="X.Org Foundation"
[  1223.737] 	compiled for 1.21.1.13, module version = 1.21.1
[  1223.737] 	Module class: X.Org Video Driver
[  1223.737] 	ABI class: X.Org Video Driver, version 25.2
[  1223.737] (II) LoadModule: "fbdev"
[  1223.737] (WW) Warning, couldn't open module fbdev
[  1223.737] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  1223.737] (II) LoadModule: "vesa"
[  1223.737] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  1223.737] (II) Module vesa: vendor="X.Org Foundation"
[  1223.737] 	compiled for 1.21.1.11, module version = 2.6.0
[  1223.737] 	Module class: X.Org Video Driver
[  1223.737] 	ABI class: X.Org Video Driver, version 25.2
[  1223.737] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  1223.737] (II) VESA: driver for VESA chipsets: vesa
[  1223.737] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[  1223.737] (II) modeset(0): using drv /dev/dri/card0
[  1223.737] vesa: Refusing to run, Framebuffer or dri device present
[  1223.737] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  1223.738] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  1223.738] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[  1223.738] (==) modeset(0): RGB weight 888
[  1223.738] (==) modeset(0): Default visual is TrueColor
[  1223.738] (II) Loading sub module "glamoregl"
[  1223.738] (II) LoadModule: "glamoregl"
[  1223.738] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  1223.739] (II) Module glamoregl: vendor="X.Org Foundation"
[  1223.739] 	compiled for 1.21.1.13, module version = 1.0.1
[  1223.739] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  1223.780] (II) modeset(0): Refusing to try glamor on llvmpipe
[  1223.782] (II) modeset(0): glamor initialization failed
[  1223.782] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[  1223.782] (II) modeset(0): Output None-1 has no monitor section
[  1223.782] (II) modeset(0): EDID for output None-1
[  1223.782] (II) modeset(0): Printing probed modes for output None-1
[  1223.782] (II) modeset(0): Modeline "1024x768"x60.0   47.19  1024 1024 1024 1024  768 768 768 768 (46.1 kHz eP)
[  1223.782] (II) modeset(0): Output None-1 connected
[  1223.782] (II) modeset(0): Using exact sizes for initial modes
[  1223.782] (II) modeset(0): Output None-1 using initial mode 1024x768 +0+0
[  1223.782] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[  1223.782] (==) modeset(0): DPI set to (96, 96)
[  1223.782] (II) Loading sub module "fb"
[  1223.782] (II) LoadModule: "fb"
[  1223.782] (II) Module "fb" already built-in
[  1223.782] (==) modeset(0): Backing store enabled
[  1223.782] (==) modeset(0): Silken mouse enabled
[  1223.782] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[  1223.782] (==) modeset(0): DPMS enabled
[  1223.782] (II) Initializing extension Generic Event Extension
[  1223.783] (II) Initializing extension SHAPE
[  1223.783] (II) Initializing extension MIT-SHM
[  1223.783] (II) Initializing extension XInputExtension
[  1223.783] (II) Initializing extension XTEST
[  1223.783] (II) Initializing extension BIG-REQUESTS
[  1223.783] (II) Initializing extension SYNC
[  1223.783] (II) Initializing extension XKEYBOARD
[  1223.783] (II) Initializing extension XC-MISC
[  1223.783] (II) Initializing extension SECURITY
[  1223.783] (II) Initializing extension XFIXES
[  1223.783] (II) Initializing extension RENDER
[  1223.783] (II) Initializing extension RANDR
[  1223.784] (II) Initializing extension COMPOSITE
[  1223.784] (II) Initializing extension DAMAGE
[  1223.784] (II) Initializing extension MIT-SCREEN-SAVER
[  1223.784] (II) Initializing extension DOUBLE-BUFFER
[  1223.784] (II) Initializing extension RECORD
[  1223.784] (II) Initializing extension DPMS
[  1223.784] (II) Initializing extension Present
[  1223.784] (II) Initializing extension DRI3
[  1223.784] (II) Initializing extension X-Resource
[  1223.784] (II) Initializing extension XVideo
[  1223.784] (II) Initializing extension XVideo-MotionCompensation
[  1223.784] (II) Initializing extension GLX
[  1223.784] (II) AIGLX: Screen 0 is not DRI2 capable
[  1223.790] (II) IGLX: Loaded and initialized swrast
[  1223.790] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[  1223.790] (II) Initializing extension XFree86-VidModeExtension
[  1223.790] (II) Initializing extension XFree86-DGA
[  1223.790] (II) Initializing extension XFree86-DRI
[  1223.790] (II) Initializing extension DRI2
[  1223.791] (II) modeset(0): Damage tracking initialized
[  1223.791] (II) modeset(0): Setting screen physical size to 270 x 203
[  1223.865] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  1223.865] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1223.865] (II) LoadModule: "libinput"
[  1223.865] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  1223.866] (II) Module libinput: vendor="X.Org Foundation"
[  1223.866] 	compiled for 1.21.1.8, module version = 1.4.0
[  1223.866] 	Module class: X.Org XInput Driver
[  1223.866] 	ABI class: X.Org XInput driver, version 24.4
[  1223.866] (II) Using input driver 'libinput' for 'Power Button'
[  1223.867] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 21 paused 0
[  1223.867] (**) Power Button: always reports core events
[  1223.867] (**) Option "Device" "/dev/input/event1"
[  1223.868] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  1223.868] (II) event1  - Power Button: device is a keyboard
[  1223.868] (II) event1  - Power Button: device removed
[  1223.868] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[  1223.868] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  1223.869] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  1223.869] (II) event1  - Power Button: device is a keyboard
[  1223.869] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  1223.869] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  1223.869] (II) Using input driver 'libinput' for 'Power Button'
[  1223.870] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 24 paused 0
[  1223.870] (**) Power Button: always reports core events
[  1223.870] (**) Option "Device" "/dev/input/event0"
[  1223.871] (II) event0  - Power Button: is tagged by udev as: Keyboard
[  1223.871] (II) event0  - Power Button: device is a keyboard
[  1223.871] (II) event0  - Power Button: device removed
[  1223.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[  1223.871] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  1223.871] (II) event0  - Power Button: is tagged by udev as: Keyboard
[  1223.871] (II) event0  - Power Button: device is a keyboard
[  1223.872] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control (/dev/input/event3)
[  1223.872] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control: Applying InputClass "libinput keyboard catchall"
[  1223.872] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control'
[  1223.873] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[  1223.873] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control: always reports core events
[  1223.873] (**) Option "Device" "/dev/input/event3"
[  1223.874] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: is tagged by udev as: Keyboard
[  1223.874] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device is a keyboard
[  1223.874] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device removed
[  1223.874] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:2516:0051.0001/input/input3/event3"
[  1223.874] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control" (type: KEYBOARD, id 8)
[  1223.876] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: is tagged by udev as: Keyboard
[  1223.876] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device is a keyboard
[  1223.877] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control System Control (/dev/input/event4)
[  1223.877] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: Applying InputClass "libinput keyboard catchall"
[  1223.877] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control System Control'
[  1223.877] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[  1223.877] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: always reports core events
[  1223.877] (**) Option "Device" "/dev/input/event4"
[  1223.878] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: is tagged by udev as: Keyboard
[  1223.878] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device is a keyboard
[  1223.879] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device removed
[  1223.879] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:2516:0051.0003/input/input4/event4"
[  1223.879] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control System Control" (type: KEYBOARD, id 9)
[  1223.880] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: is tagged by udev as: Keyboard
[  1223.880] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device is a keyboard
[  1223.881] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control (/dev/input/event5)
[  1223.881] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: Applying InputClass "libinput keyboard catchall"
[  1223.881] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control'
[  1223.881] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27 paused 0
[  1223.881] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: always reports core events
[  1223.881] (**) Option "Device" "/dev/input/event5"
[  1223.882] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: is tagged by udev as: Keyboard
[  1223.883] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device is a keyboard
[  1223.883] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device removed
[  1223.883] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:2516:0051.0003/input/input5/event5"
[  1223.883] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control" (type: KEYBOARD, id 10)
[  1223.884] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: is tagged by udev as: Keyboard
[  1223.884] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device is a keyboard
[  1223.885] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event18)
[  1223.885] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[  1223.885] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[  1223.886] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 28 paused 0
[  1223.886] (**) Logitech USB Keyboard: always reports core events
[  1223.886] (**) Option "Device" "/dev/input/event18"
[  1223.887] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  1223.887] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  1223.887] (II) event18 - Logitech USB Keyboard: device removed
[  1223.887] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:046D:C31C.0004/input/input18/event18"
[  1223.887] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[  1223.888] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  1223.889] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  1223.889] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event19)
[  1223.889] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[  1223.889] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[  1223.890] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 29 paused 0
[  1223.890] (**) Logitech USB Keyboard Consumer Control: always reports core events
[  1223.890] (**) Option "Device" "/dev/input/event19"
[  1223.891] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  1223.891] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  1223.892] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  1223.892] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:046D:C31C.0005/input/input19/event19"
[  1223.892] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 12)
[  1223.893] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  1223.893] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  1223.894] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event20)
[  1223.894] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[  1223.894] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[  1223.895] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 30 paused 0
[  1223.895] (**) Logitech USB Keyboard System Control: always reports core events
[  1223.895] (**) Option "Device" "/dev/input/event20"
[  1223.896] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  1223.896] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  1223.896] (II) event20 - Logitech USB Keyboard System Control: device removed
[  1223.896] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:046D:C31C.0005/input/input20/event20"
[  1223.896] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 13)
[  1223.897] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  1223.897] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  1223.898] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event21)
[  1223.898] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall"
[  1223.898] (II) Using input driver 'libinput' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[  1223.953] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 31 paused 0
[  1223.953] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[  1223.953] (**) Option "Device" "/dev/input/event21"
[  1223.955] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  1223.955] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  1223.955] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  1223.955] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  1223.955] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  1223.955] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  1223.955] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:045E:0040.0006/input/input21/event21"
[  1223.955] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 14)
[  1223.955] (**) Option "AccelerationScheme" "none"
[  1223.955] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0
[  1223.955] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[  1223.955] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[  1223.956] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  1223.956] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  1223.957] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[  1223.957] (II) No input driver specified, ignoring this device.
[  1223.957] (II) This device may have been added with another device file.
[  1223.958] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event6)
[  1223.958] (II) No input driver specified, ignoring this device.
[  1223.958] (II) This device may have been added with another device file.
[  1223.958] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[  1223.958] (II) No input driver specified, ignoring this device.
[  1223.958] (II) This device may have been added with another device file.
[  1223.958] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[  1223.958] (II) No input driver specified, ignoring this device.
[  1223.958] (II) This device may have been added with another device file.
[  1223.959] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[  1223.959] (II) No input driver specified, ignoring this device.
[  1223.959] (II) This device may have been added with another device file.
[  1223.959] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event10)
[  1223.959] (II) No input driver specified, ignoring this device.
[  1223.959] (II) This device may have been added with another device file.
[  1223.959] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event11)
[  1223.959] (II) No input driver specified, ignoring this device.
[  1223.959] (II) This device may have been added with another device file.
[  1223.959] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event12)
[  1223.960] (II) No input driver specified, ignoring this device.
[  1223.960] (II) This device may have been added with another device file.
[  1223.960] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event13)
[  1223.960] (II) No input driver specified, ignoring this device.
[  1223.960] (II) This device may have been added with another device file.
[  1223.960] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event14)
[  1223.960] (II) No input driver specified, ignoring this device.
[  1223.960] (II) This device may have been added with another device file.
[  1223.960] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event15)
[  1223.960] (II) No input driver specified, ignoring this device.
[  1223.960] (II) This device may have been added with another device file.
[  1223.961] (II) config/udev: Adding input device HD-Audio Generic Line Out Side (/dev/input/event16)
[  1223.961] (II) No input driver specified, ignoring this device.
[  1223.961] (II) This device may have been added with another device file.
[  1223.961] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event17)
[  1223.961] (II) No input driver specified, ignoring this device.
[  1223.961] (II) This device may have been added with another device file.
[  1223.961] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[  1223.961] (II) No input driver specified, ignoring this device.
[  1223.961] (II) This device may have been added with another device file.
[  2426.760] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[  2426.760] (II) No input driver specified, ignoring this device.
[  2426.760] (II) This device may have been added with another device file.
[  2426.778] (II) config/udev: removing device Power Button
[  2426.778] (**) Option "fd" "24"
[  2426.778] (II) event0  - Power Button: device removed
[  2426.779] (II) UnloadModule: "libinput"
[  2426.779] (II) systemd-logind: releasing fd for 13:64
[  2426.816] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  2426.816] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2426.816] (II) Using input driver 'libinput' for 'Power Button'
[  2426.817] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 40 paused 0
[  2426.817] (**) Power Button: always reports core events
[  2426.817] (**) Option "Device" "/dev/input/event0"
[  2426.818] (II) event0  - Power Button: is tagged by udev as: Keyboard
[  2426.818] (II) event0  - Power Button: device is a keyboard
[  2426.818] (II) event0  - Power Button: device removed
[  2426.818] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[  2426.818] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[  2426.819] (II) event0  - Power Button: is tagged by udev as: Keyboard
[  2426.819] (II) event0  - Power Button: device is a keyboard
[  2426.820] (II) config/udev: removing device Power Button
[  2426.820] (**) Option "fd" "21"
[  2426.820] (II) event1  - Power Button: device removed
[  2426.820] (II) UnloadModule: "libinput"
[  2426.820] (II) systemd-logind: releasing fd for 13:65
[  2426.821] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  2426.821] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2426.821] (II) Using input driver 'libinput' for 'Power Button'
[  2426.821] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24 paused 0
[  2426.821] (**) Power Button: always reports core events
[  2426.821] (**) Option "Device" "/dev/input/event1"
[  2426.822] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  2426.822] (II) event1  - Power Button: device is a keyboard
[  2426.822] (II) event1  - Power Button: device removed
[  2426.822] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[  2426.822] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2426.823] (II) event1  - Power Button: is tagged by udev as: Keyboard
[  2426.823] (II) event1  - Power Button: device is a keyboard
[  2426.825] (II) config/udev: removing device Logitech USB Keyboard System Control
[  2426.825] (**) Option "fd" "30"
[  2426.825] (II) event20 - Logitech USB Keyboard System Control: device removed
[  2426.825] (II) UnloadModule: "libinput"
[  2426.825] (II) systemd-logind: releasing fd for 13:84
[  2426.827] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event20)
[  2426.827] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[  2426.827] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[  2426.828] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 30 paused 0
[  2426.828] (**) Logitech USB Keyboard System Control: always reports core events
[  2426.828] (**) Option "Device" "/dev/input/event20"
[  2426.830] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  2426.830] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  2426.830] (II) event20 - Logitech USB Keyboard System Control: device removed
[  2426.830] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:046D:C31C.0005/input/input20/event20"
[  2426.830] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 13)
[  2426.831] (II) event20 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[  2426.832] (II) event20 - Logitech USB Keyboard System Control: device is a keyboard
[  2426.832] (II) config/udev: removing device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
[  2426.832] (**) Option "fd" "31"
[  2426.832] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  2426.832] (II) UnloadModule: "libinput"
[  2426.832] (II) systemd-logind: releasing fd for 13:85
[  2426.834] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event21)
[  2426.834] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "libinput pointer catchall"
[  2426.834] (II) Using input driver 'libinput' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[  2426.834] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 31 paused 0
[  2426.834] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[  2426.834] (**) Option "Device" "/dev/input/event21"
[  2426.836] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  2426.836] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  2426.836] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  2426.836] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  2426.836] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  2426.836] (II) libinput: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Step value 0 was provided, libinput Fallback acceleration function is used.
[  2426.836] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.2/1-8.2:1.0/0003:045E:0040.0006/input/input21/event21"
[  2426.836] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 14)
[  2426.837] (**) Option "AccelerationScheme" "none"
[  2426.837] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) selected scheme none/0
[  2426.837] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[  2426.837] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[  2426.838] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): is tagged by udev as: Mouse
[  2426.838] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device is a pointer
[  2426.839] (II) config/udev: removing device Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control
[  2426.839] (**) Option "fd" "27"
[  2426.839] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device removed
[  2426.839] (II) UnloadModule: "libinput"
[  2426.839] (II) systemd-logind: releasing fd for 13:69
[  2426.840] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control (/dev/input/event5)
[  2426.840] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: Applying InputClass "libinput keyboard catchall"
[  2426.840] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control'
[  2426.841] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27 paused 0
[  2426.841] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: always reports core events
[  2426.841] (**) Option "Device" "/dev/input/event5"
[  2426.843] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: is tagged by udev as: Keyboard
[  2426.843] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device is a keyboard
[  2426.843] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device removed
[  2426.843] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:2516:0051.0003/input/input5/event5"
[  2426.843] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control" (type: KEYBOARD, id 10)
[  2426.845] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: is tagged by udev as: Keyboard
[  2426.845] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device is a keyboard
[  2426.845] (II) config/udev: removing device Logitech USB Keyboard Consumer Control
[  2426.845] (**) Option "fd" "29"
[  2426.845] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  2426.845] (II) UnloadModule: "libinput"
[  2426.845] (II) systemd-logind: releasing fd for 13:83
[  2426.846] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event19)
[  2426.846] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[  2426.846] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[  2426.847] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 29 paused 0
[  2426.847] (**) Logitech USB Keyboard Consumer Control: always reports core events
[  2426.847] (**) Option "Device" "/dev/input/event19"
[  2426.848] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  2426.848] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  2426.849] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  2426.849] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:046D:C31C.0005/input/input19/event19"
[  2426.849] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 12)
[  2426.850] (II) event19 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[  2426.850] (II) event19 - Logitech USB Keyboard Consumer Control: device is a keyboard
[  2426.851] (II) config/udev: removing device Cooler Master Technology Inc. AMD SR4 lamplight Control
[  2426.851] (**) Option "fd" "25"
[  2426.851] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device removed
[  2426.851] (II) UnloadModule: "libinput"
[  2426.851] (II) systemd-logind: releasing fd for 13:67
[  2426.852] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control (/dev/input/event3)
[  2426.852] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control: Applying InputClass "libinput keyboard catchall"
[  2426.852] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control'
[  2426.852] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[  2426.852] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control: always reports core events
[  2426.852] (**) Option "Device" "/dev/input/event3"
[  2426.854] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: is tagged by udev as: Keyboard
[  2426.854] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device is a keyboard
[  2426.854] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device removed
[  2426.854] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.0/0003:2516:0051.0001/input/input3/event3"
[  2426.854] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control" (type: KEYBOARD, id 8)
[  2426.856] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: is tagged by udev as: Keyboard
[  2426.856] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device is a keyboard
[  2426.856] (II) config/udev: removing device Cooler Master Technology Inc. AMD SR4 lamplight Control System Control
[  2426.856] (**) Option "fd" "26"
[  2426.856] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device removed
[  2426.857] (II) UnloadModule: "libinput"
[  2426.857] (II) systemd-logind: releasing fd for 13:68
[  2426.858] (II) config/udev: Adding input device Cooler Master Technology Inc. AMD SR4 lamplight Control System Control (/dev/input/event4)
[  2426.858] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: Applying InputClass "libinput keyboard catchall"
[  2426.858] (II) Using input driver 'libinput' for 'Cooler Master Technology Inc. AMD SR4 lamplight Control System Control'
[  2426.858] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[  2426.858] (**) Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: always reports core events
[  2426.858] (**) Option "Device" "/dev/input/event4"
[  2426.859] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: is tagged by udev as: Keyboard
[  2426.859] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device is a keyboard
[  2426.860] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device removed
[  2426.860] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-7/1-7:1.2/0003:2516:0051.0003/input/input4/event4"
[  2426.860] (II) XINPUT: Adding extended input device "Cooler Master Technology Inc. AMD SR4 lamplight Control System Control" (type: KEYBOARD, id 9)
[  2426.861] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: is tagged by udev as: Keyboard
[  2426.861] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device is a keyboard
[  2426.861] (II) config/udev: removing device Logitech USB Keyboard
[  2426.861] (**) Option "fd" "28"
[  2426.861] (II) event18 - Logitech USB Keyboard: device removed
[  2426.862] (II) UnloadModule: "libinput"
[  2426.862] (II) systemd-logind: releasing fd for 13:82
[  2426.863] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event18)
[  2426.863] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[  2426.863] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[  2426.863] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 28 paused 0
[  2426.863] (**) Logitech USB Keyboard: always reports core events
[  2426.863] (**) Option "Device" "/dev/input/event18"
[  2426.864] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  2426.865] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  2426.865] (II) event18 - Logitech USB Keyboard: device removed
[  2426.865] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:046D:C31C.0004/input/input18/event18"
[  2426.865] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 11)
[  2426.866] (II) event18 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[  2426.866] (II) event18 - Logitech USB Keyboard: device is a keyboard
[  2426.867] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event14)
[  2426.867] (II) No input driver specified, ignoring this device.
[  2426.867] (II) This device may have been added with another device file.
[  2426.867] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[  2426.867] (II) No input driver specified, ignoring this device.
[  2426.867] (II) This device may have been added with another device file.
[  2426.868] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[  2426.868] (II) No input driver specified, ignoring this device.
[  2426.868] (II) This device may have been added with another device file.
[  2426.868] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event12)
[  2426.868] (II) No input driver specified, ignoring this device.
[  2426.868] (II) This device may have been added with another device file.
[  2426.868] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[  2426.868] (II) No input driver specified, ignoring this device.
[  2426.868] (II) This device may have been added with another device file.
[  2426.868] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event6)
[  2426.868] (II) No input driver specified, ignoring this device.
[  2426.868] (II) This device may have been added with another device file.
[  2426.869] (II) config/udev: Adding input device HD-Audio Generic Line Out Side (/dev/input/event16)
[  2426.869] (II) No input driver specified, ignoring this device.
[  2426.869] (II) This device may have been added with another device file.
[  2426.869] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event10)
[  2426.869] (II) No input driver specified, ignoring this device.
[  2426.869] (II) This device may have been added with another device file.
[  2426.869] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event13)
[  2426.869] (II) No input driver specified, ignoring this device.
[  2426.869] (II) This device may have been added with another device file.
[  2426.869] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[  2426.870] (II) No input driver specified, ignoring this device.
[  2426.870] (II) This device may have been added with another device file.
[  2426.870] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event17)
[  2426.870] (II) No input driver specified, ignoring this device.
[  2426.870] (II) This device may have been added with another device file.
[  2426.870] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event15)
[  2426.870] (II) No input driver specified, ignoring this device.
[  2426.870] (II) This device may have been added with another device file.
[  2426.870] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event11)
[  2426.870] (II) No input driver specified, ignoring this device.
[  2426.870] (II) This device may have been added with another device file.
[  2722.973] (**) Option "fd" "40"
[  2722.973] (II) event0  - Power Button: device removed
[  2722.973] (**) Option "fd" "24"
[  2722.973] (II) event1  - Power Button: device removed
[  2722.973] (**) Option "fd" "30"
[  2722.973] (II) event20 - Logitech USB Keyboard System Control: device removed
[  2722.973] (**) Option "fd" "31"
[  2722.973] (II) event21 - Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): device removed
[  2722.973] (**) Option "fd" "27"
[  2722.973] (II) event5  - Cooler Master Technology Inc. AMD SR4 lamplight Control Consumer Control: device removed
[  2722.973] (**) Option "fd" "29"
[  2722.973] (II) event19 - Logitech USB Keyboard Consumer Control: device removed
[  2722.973] (**) Option "fd" "25"
[  2722.973] (II) event3  - Cooler Master Technology Inc. AMD SR4 lamplight Control: device removed
[  2722.973] (**) Option "fd" "26"
[  2722.974] (II) event4  - Cooler Master Technology Inc. AMD SR4 lamplight Control System Control: device removed
[  2722.974] (**) Option "fd" "28"
[  2722.974] (II) event18 - Logitech USB Keyboard: device removed
[  2722.974] (II) UnloadModule: "libinput"
[  2722.974] (II) systemd-logind: releasing fd for 13:82
[  2723.024] (II) UnloadModule: "libinput"
[  2723.024] (II) systemd-logind: releasing fd for 13:68
[  2723.027] (II) UnloadModule: "libinput"
[  2723.027] (II) systemd-logind: releasing fd for 13:67
[  2723.027] (II) UnloadModule: "libinput"
[  2723.028] (II) systemd-logind: releasing fd for 13:83
[  2723.028] (II) UnloadModule: "libinput"
[  2723.028] (II) systemd-logind: releasing fd for 13:69
[  2723.028] (II) UnloadModule: "libinput"
[  2723.028] (II) systemd-logind: releasing fd for 13:85
[  2723.028] (II) UnloadModule: "libinput"
[  2723.028] (II) systemd-logind: releasing fd for 13:84
[  2723.029] (II) UnloadModule: "libinput"
[  2723.029] (II) systemd-logind: releasing fd for 13:65
[  2723.030] (II) UnloadModule: "libinput"
[  2723.030] (II) systemd-logind: releasing fd for 13:64
[  2723.037] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[  2723.037] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[  2723.037] (WW) xf86OpenConsole: VT_GETSTATE failed: Input/output error
[  2723.053] (II) Server terminated successfully (0). Closing log file.

seth · 2024-05-03 06:58:36

That server ran on the simpledrm device, this morning at 06:12:00 your time (SAST, I guess?)
Is it the latest one?
Please post your complete system journal for the boot:

sudo journalctl -b | curl -F 'file=@-' 0x0.st

RedArcher · 2024-05-04 17:35:32

Yes. Correct.

http://0x0.st/XXIS.txt

After i3 is up, I execute the following command:

xrandr --output HDMI-0 --mode 1920x1080 --rate 60

P.S. What does SAST mean?

Last edited by RedArcher (2024-05-04 17:38:12)

seth · 2024-05-04 20:06:16

May 04 19:52:10 workstation kernel: [drm] Initialized simpledrm 1.0.0 20200625 for simple-framebuffer.0 on minor 0
May 04 19:52:10 workstation kernel: simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device

Enable https://wiki.archlinux.org/title/NVIDIA … de_setting - use the "nvidia_drm.modeset=1" kernel parameter (modprobe.conf won't do!)

The nvidia module loads, but it's 535xx, do you have the matching nvidia-utils or is nvidia-utils from 550xx?
(Otherwise I don't really understand how you ended up w/ running on the simpledrm device)

pacman -Qs nvidia

and please also post the updated xorg log after adding the kernel parameter.

SAST is https://en.wikipedia.org/wiki/South_Afr … ndard_Time

RedArcher · 2024-05-05 06:50:27

I guess only 535xx as there is no 550xx in the repositories.

Last edited by RedArcher (2024-05-05 07:17:44)

seth · 2024-05-05 06:54:32

Don't "guess", look

pacman -Qs nvidia

https://archlinux.org/packages/extra/x8 … dia-utils/ is currently 550.78

RedArcher · 2024-05-05 07:17:54

# pacman -Qs nvidia
local/egl-wayland 2:1.1.13-1
    EGLStream-based Wayland external platform
local/libvdpau 1.5-2
    Nvidia VDPAU library
local/libxnvctrl 550.67-1
    NVIDIA NV-CONTROL X extension
local/nccl 2.21.5-1
    Library for NVIDIA multi-GPU and multi-node collective communication
    primitives
local/nvidia-535xx-dkms 535.171.04-1
    NVIDIA drivers - module sources, 535 branch
local/nvidia-535xx-utils 535.171.04-1                                    
    NVIDIA drivers utilities, 535 branch                                 
local/opencl-nvidia-535xx 535.171.04-1                                   
    OpenCL implemention for NVIDIA, 535 branch

seth · 2024-05-05 07:54:33

Ok, that's not it.

seth wrote:

Enable https://wiki.archlinux.org/title/NVIDIA … de_setting - use the "nvidia_drm.modeset=1" kernel parameter (modprobe.conf won't do!)
[…] and please also post the updated xorg log after adding the kernel parameter.

RedArcher · 2024-05-05 08:53:46

# modprobe nvidia_drm.modeset=1   
modprobe: FATAL: Module nvidia_drm.modeset=1 not found in directory /lib/modules/6.8.8-arch1-1

Do I need to add the module handling manually?

Arch Linux

#1 2024-04-30 08:35:11

HTML view is blanked for WebKit GTK+ Software under X11

#2 2024-04-30 22:22:07

Re: HTML view is blanked for WebKit GTK+ Software under X11

#3 2024-05-01 07:29:42

Re: HTML view is blanked for WebKit GTK+ Software under X11

#4 2024-05-01 07:31:49

Re: HTML view is blanked for WebKit GTK+ Software under X11

#5 2024-05-02 07:03:06

Re: HTML view is blanked for WebKit GTK+ Software under X11

#6 2024-05-02 12:45:40

Re: HTML view is blanked for WebKit GTK+ Software under X11

#7 2024-05-02 13:56:58

Re: HTML view is blanked for WebKit GTK+ Software under X11

#8 2024-05-02 14:15:47

Re: HTML view is blanked for WebKit GTK+ Software under X11

#9 2024-05-02 15:44:23

Re: HTML view is blanked for WebKit GTK+ Software under X11

#10 2024-05-02 17:04:29

Re: HTML view is blanked for WebKit GTK+ Software under X11

#11 2024-05-02 18:45:04

Re: HTML view is blanked for WebKit GTK+ Software under X11

#12 2024-05-03 03:28:34

Re: HTML view is blanked for WebKit GTK+ Software under X11

#13 2024-05-03 03:57:51

Re: HTML view is blanked for WebKit GTK+ Software under X11

#14 2024-05-03 06:07:04

Re: HTML view is blanked for WebKit GTK+ Software under X11

#15 2024-05-03 06:36:30

Re: HTML view is blanked for WebKit GTK+ Software under X11

#16 2024-05-03 06:39:41

Re: HTML view is blanked for WebKit GTK+ Software under X11

#17 2024-05-03 06:54:17

Re: HTML view is blanked for WebKit GTK+ Software under X11

#18 2024-05-03 06:58:36

Re: HTML view is blanked for WebKit GTK+ Software under X11

#19 2024-05-04 17:35:32

Re: HTML view is blanked for WebKit GTK+ Software under X11

#20 2024-05-04 20:06:16

Re: HTML view is blanked for WebKit GTK+ Software under X11

#21 2024-05-05 06:50:27

Re: HTML view is blanked for WebKit GTK+ Software under X11

#22 2024-05-05 06:54:32

Re: HTML view is blanked for WebKit GTK+ Software under X11

#23 2024-05-05 07:17:54

Re: HTML view is blanked for WebKit GTK+ Software under X11

#24 2024-05-05 07:54:33

Re: HTML view is blanked for WebKit GTK+ Software under X11

#25 2024-05-05 08:53:46

Re: HTML view is blanked for WebKit GTK+ Software under X11

Board footer