x86_64 is confirmed not to work. At the very least many of the components (such as dtlogin) fail to build, though I didn't look into trying to debug that.
]]>https://aur.archlinux.org/packages.php?ID=62776
Right now it is for i686 only.
It works with stock openmotif and only AUR dependency is ncompress which can be found at:
https://aur.archlinux.org/packages.php?ID=59212
There is no need to add any ISO-8859-1 locale before building and no need to run rpcbind in unsecure mode.
After installing the package the following will start the CDE:
LANG=C startx /usr/dt/bin/Xsession
rpcbind should be started before starting CDE though:
systemd:
systemctl start rpcbind.service
init:
rc.d start rpcbind
Any feedback is welcomed especially building on x86_64.
]]>mksh does not suffer the problem so now the package depends on it. Need to:
ln -s /bin/mksh /bin/ksh
before makepkg.
So far dtlogin and Xsession both work and CDE panel shows up. I can run programs from terminal but most of the actions from panel does not work.
The same is true for manual install.
]]>I'm impressed with the progress of the PKGBUILD and encourage you keep at it. CDE even has a live CD now if you are impatient:
https://sourceforge.net/projects/parted … o/download
It's Parted Magic. The fonts aren't perfect but it's pretty solid and if you want to take CDE for a spin, I recommend this.
]]>Of course, a lot of things are still broken. I can't tell whether it's the PKGBUILD's fault or not. I really hope that CDE will actually be usable some day. Judging by some comments on the ML ("how did this ever work") we can be happy that some of it works at all.
@kraileth: I remember that Xfce (sic) was picky about that, too -- some years ago.
]]>Seems like CDE is a bit picky about that - none of the other DEs that I tested had a problem with it. But it doesn't hurt to set things up properly so that's fine, I guess.
Now I'm quite curious about what the real CDE is like. Thanks to everyone who is involved in this project.
]]>By the way, thanks a lot for your PKGBUILD, ecmel. I'll try it as soon as possible.
Thanks to you for figuring out installCDE script.
I am still studying on configRun and we should get rid of nawk if possible.
]]>hostname -f
?
It should print your full hostname. If it does not, you might not get past the "blue screen". (I made that mistake at first, too, because I also set up a clean VM -- and forgot to configure /etc/hosts. )
By the way, thanks a lot for your PKGBUILD, ecmel. I'll try it as soon as possible.
]]>Even though I did not mention it in my last post, I did the small change in /etc/rc.d/rpcbind. I'm not sure, though, whether I added rpcbind to the daemons in rc.conf, might have forgotten that.
However I set up two fresh virtual machines today for another test (one to build the package and a clean one for the CDE test install). The clean machine is a current Arch base install plus xorg-server, xorg-xinit and virtualbox-archlinux-additions. Then I installed custom packages for the patched openmotif and a cde-git package built today.
If I do what ecmel suggested, I can see the light bluish screen for about two seconds but then I'm back to the console with the error message xinit: connection to X server lost.
Are there any packages that I missed but should have installed?
If not, here's my Xorg.0.log in case that is of any use:
[ 46.579]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 46.581] X Protocol Version 11, Revision 0
[ 46.581] Build Operating System: Linux 3.4.8-1-ARCH i686
[ 46.582] Current Operating System: Linux (none) 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 08:15:06 UTC 2012 i686
[ 46.583] Kernel command line: root=/dev/sda3 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 46.584] Build Date: 27 August 2012 08:08:29AM
[ 46.584]
[ 46.585] Current version of pixman: 0.26.2
[ 46.587] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 46.588] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 46.594] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 28 21:47:08 2012
[ 46.595] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 46.596] (==) No Layout section. Using the first Screen section.
[ 46.596] (==) No screen section available. Using defaults.
[ 46.596] (**) |-->Screen "Default Screen Section" (0)
[ 46.596] (**) | |-->Monitor "<default monitor>"
[ 46.596] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 46.596] (==) Automatically adding devices
[ 46.596] (==) Automatically enabling devices
[ 46.598] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 46.598] Entry deleted from font path.
[ 46.598] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 46.598] Entry deleted from font path.
[ 46.598] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 46.598] Entry deleted from font path.
[ 46.598] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 46.598] Entry deleted from font path.
[ 46.598] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 46.598] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 46.598] Entry deleted from font path.
[ 46.598] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 46.598] (==) FontPath set to:
/usr/share/fonts/misc/
[ 46.598] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 46.598] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 46.598] (II) Loader magic: 0x82225a0
[ 46.598] (II) Module ABI versions:
[ 46.598] X.Org ANSI C Emulation: 0.4
[ 46.598] X.Org Video Driver: 12.1
[ 46.598] X.Org XInput driver : 16.0
[ 46.598] X.Org Server Extension : 6.0
[ 46.600] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/134217728
[ 46.600] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 46.600] (II) LoadModule: "extmod"
[ 46.602] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 46.602] (II) Module extmod: vendor="X.Org Foundation"
[ 46.602] compiled for 1.12.4, module version = 1.0.0
[ 46.602] Module class: X.Org Server Extension
[ 46.602] ABI class: X.Org Server Extension, version 6.0
[ 46.602] (II) Loading extension MIT-SCREEN-SAVER
[ 46.602] (II) Loading extension XFree86-VidModeExtension
[ 46.602] (II) Loading extension XFree86-DGA
[ 46.603] (II) Loading extension DPMS
[ 46.603] (II) Loading extension XVideo
[ 46.603] (II) Loading extension XVideo-MotionCompensation
[ 46.603] (II) Loading extension X-Resource
[ 46.603] (II) LoadModule: "dbe"
[ 46.603] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 46.603] (II) Module dbe: vendor="X.Org Foundation"
[ 46.603] compiled for 1.12.4, module version = 1.0.0
[ 46.603] Module class: X.Org Server Extension
[ 46.603] ABI class: X.Org Server Extension, version 6.0
[ 46.603] (II) Loading extension DOUBLE-BUFFER
[ 46.603] (II) LoadModule: "glx"
[ 46.603] (WW) Warning, couldn't open module glx
[ 46.603] (II) UnloadModule: "glx"
[ 46.603] (II) Unloading glx
[ 46.603] (EE) Failed to load module "glx" (module does not exist, 0)
[ 46.603] (II) LoadModule: "record"
[ 46.604] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 46.604] (II) Module record: vendor="X.Org Foundation"
[ 46.604] compiled for 1.12.4, module version = 1.13.0
[ 46.604] Module class: X.Org Server Extension
[ 46.604] ABI class: X.Org Server Extension, version 6.0
[ 46.604] (II) Loading extension RECORD
[ 46.604] (II) LoadModule: "dri"
[ 46.604] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 46.605] (II) Module dri: vendor="X.Org Foundation"
[ 46.605] compiled for 1.12.4, module version = 1.0.0
[ 46.605] ABI class: X.Org Server Extension, version 6.0
[ 46.605] (II) Loading extension XFree86-DRI
[ 46.605] (II) LoadModule: "dri2"
[ 46.605] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 46.606] (II) Module dri2: vendor="X.Org Foundation"
[ 46.606] compiled for 1.12.4, module version = 1.2.0
[ 46.606] ABI class: X.Org Server Extension, version 6.0
[ 46.606] (II) Loading extension DRI2
[ 46.606] (==) Matched vboxvideo as autoconfigured driver 0
[ 46.606] (==) Matched vesa as autoconfigured driver 1
[ 46.606] (==) Matched fbdev as autoconfigured driver 2
[ 46.606] (==) Assigned the driver to the xf86ConfigLayout
[ 46.606] (II) LoadModule: "vboxvideo"
[ 46.606] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo.so
[ 46.607] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 46.607] compiled for 1.5.99.901, module version = 1.0.1
[ 46.607] Module class: X.Org Video Driver
[ 46.607] ABI class: X.Org Video Driver, version 12.0
[ 46.607] (**) Load address of symbol "VBOXVIDEO" is 0xb72ab300
[ 46.607] (II) LoadModule: "vesa"
[ 46.607] (WW) Warning, couldn't open module vesa
[ 46.607] (II) UnloadModule: "vesa"
[ 46.607] (II) Unloading vesa
[ 46.607] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 46.607] (II) LoadModule: "fbdev"
[ 46.607] (WW) Warning, couldn't open module fbdev
[ 46.607] (II) UnloadModule: "fbdev"
[ 46.607] (II) Unloading fbdev
[ 46.607] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 46.607] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 46.608] (--) using VT number 7
[ 46.617] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.1.20_OSE
[ 46.617] (II) Loading sub module "ramdac"
[ 46.617] (II) LoadModule: "ramdac"
[ 46.617] (II) Module "ramdac" already built-in
[ 46.617] (II) Loading sub module "fb"
[ 46.617] (II) LoadModule: "fb"
[ 46.617] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 46.619] (II) Module fb: vendor="X.Org Foundation"
[ 46.619] compiled for 1.12.4, module version = 1.0.0
[ 46.619] ABI class: X.Org ANSI C Emulation, version 0.4
[ 46.619] (II) Loading sub module "shadowfb"
[ 46.619] (II) LoadModule: "shadowfb"
[ 46.619] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 46.619] (II) Module shadowfb: vendor="X.Org Foundation"
[ 46.619] compiled for 1.12.4, module version = 1.0.0
[ 46.619] ABI class: X.Org ANSI C Emulation, version 0.4
[ 46.619] (II) Loading sub module "vgahw"
[ 46.619] (II) LoadModule: "vgahw"
[ 46.619] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 46.620] (II) Module vgahw: vendor="X.Org Foundation"
[ 46.620] compiled for 1.12.4, module version = 0.1.0
[ 46.620] ABI class: X.Org Video Driver, version 12.1
[ 46.620] (II) Loading sub module "dri"
[ 46.620] (II) LoadModule: "dri"
[ 46.620] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 46.620] (II) Module dri: vendor="X.Org Foundation"
[ 46.620] compiled for 1.12.4, module version = 1.0.0
[ 46.620] ABI class: X.Org Server Extension, version 6.0
[ 46.621] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 46.621] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 46.621] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[ 46.621] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 46.621] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 46.621] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 46.621] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 46.621] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 46.621] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 46.621] (**) VBoxVideo(0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 46.621] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz b)
[ 46.621] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 46.621] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 46.621] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[ 46.621] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 46.621] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[ 46.621] (==) VBoxVideo(0): RGB weight 888
[ 46.621] (==) VBoxVideo(0): Default visual is TrueColor
[ 46.621] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 46.621] (==) VBoxVideo(0): DPI set to (96, 96)
[ 46.621] (--) Depth 24 pixmap format is 32 bpp
[ 47.211] (EE) VBoxVideo(0): Disabling DRI due to missing server functionality.
[ 47.211] (II) VBoxVideo(0): visual configurations initialized
[ 47.212] (II) VBoxVideo(0): Requested monitor count: 1
[ 47.212] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 47.212] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 47.213] (II) VBoxVideo(0): EDID for output VBOX0
[ 47.213] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 50332672
[ 47.213] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 47.213] (II) VBoxVideo(0): EDID Version: 1.3
[ 47.213] (II) VBoxVideo(0): Digital Display Input
[ 47.213] (II) VBoxVideo(0): Indeterminate output size
[ 47.213] (II) VBoxVideo(0): Gamma: 2.20
[ 47.213] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 47.213] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 47.213] (II) VBoxVideo(0): Default color space is primary color space
[ 47.213] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 47.213] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 47.213] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 47.213] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 47.213] (II) VBoxVideo(0): Supported detailed timing:
[ 47.213] (II) VBoxVideo(0): clock: 47.8 MHz Image Size: 0 x 0 mm
[ 47.213] (II) VBoxVideo(0): h_active: 1024 h_sync: 1026 h_sync_end 1028 h_blank_end 1030 h_border: 0
[ 47.213] (II) VBoxVideo(0): v_active: 768 v_sync: 770 v_sync_end 772 v_blanking: 774 v_border: 0
[ 47.213] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 47.213] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 47.213] (II) VBoxVideo(0): EDID (in hex):
[ 47.213] (II) VBoxVideo(0): 00ffffffffffff005858000000040003
[ 47.213] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 47.213] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 47.213] (II) VBoxVideo(0): 010101010101af120006400006300202
[ 47.213] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 47.213] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 47.213] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 47.213] (II) VBoxVideo(0): 000a20202020202020202020202000fb
[ 47.213] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 47.213] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 47.213] (II) VBoxVideo(0): Using hsync ranges from config file
[ 47.213] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 47.213] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 47.213] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz eP)
[ 47.214] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[ 47.214] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz Pb)
[ 47.214] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz b)
[ 47.214] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz b)
[ 47.214] (II) VBoxVideo(0): Output VBOX0 connected
[ 47.214] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 47.214] (II) VBoxVideo(0): Output VBOX0 using initial mode 1024x768
[ 47.214] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 47.214] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 47.215] (==) VBoxVideo(0): DPMS enabled
[ 47.215] (--) RandR disabled
[ 47.215] (II) Initializing built-in extension Generic Event Extension
[ 47.215] (II) Initializing built-in extension SHAPE
[ 47.215] (II) Initializing built-in extension MIT-SHM
[ 47.215] (II) Initializing built-in extension XInputExtension
[ 47.215] (II) Initializing built-in extension XTEST
[ 47.215] (II) Initializing built-in extension BIG-REQUESTS
[ 47.215] (II) Initializing built-in extension SYNC
[ 47.215] (II) Initializing built-in extension XKEYBOARD
[ 47.215] (II) Initializing built-in extension XC-MISC
[ 47.215] (II) Initializing built-in extension SECURITY
[ 47.215] (II) Initializing built-in extension XINERAMA
[ 47.215] (II) Initializing built-in extension XFIXES
[ 47.215] (II) Initializing built-in extension RENDER
[ 47.215] (II) Initializing built-in extension RANDR
[ 47.215] (II) Initializing built-in extension COMPOSITE
[ 47.215] (II) Initializing built-in extension DAMAGE
[ 47.222] (II) VBoxVideo(0): Setting screen physical size to 270 x 203
[ 47.274] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 47.274] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 47.274] (II) LoadModule: "evdev"
[ 47.274] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 47.275] (II) Module evdev: vendor="X.Org Foundation"
[ 47.275] compiled for 1.12.3.901, module version = 2.7.3
[ 47.275] Module class: X.Org XInput Driver
[ 47.275] ABI class: X.Org XInput driver, version 16.0
[ 47.275] (II) Using input driver 'evdev' for 'Power Button'
[ 47.276] (**) Power Button: always reports core events
[ 47.276] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 47.276] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 47.276] (--) evdev: Power Button: Found keys
[ 47.276] (II) evdev: Power Button: Configuring as keyboard
[ 47.276] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 47.276] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 47.276] (**) Option "xkb_rules" "evdev"
[ 47.276] (**) Option "xkb_model" "evdev"
[ 47.276] (**) Option "xkb_layout" "us"
[ 47.302] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 47.302] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 47.302] (II) Using input driver 'evdev' for 'Sleep Button'
[ 47.303] (**) Sleep Button: always reports core events
[ 47.303] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 47.303] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 47.303] (--) evdev: Sleep Button: Found keys
[ 47.303] (II) evdev: Sleep Button: Configuring as keyboard
[ 47.303] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input2/event2"
[ 47.303] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 47.303] (**) Option "xkb_rules" "evdev"
[ 47.303] (**) Option "xkb_model" "evdev"
[ 47.303] (**) Option "xkb_layout" "us"
[ 47.303] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event6)
[ 47.303] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 47.303] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[ 47.303] (**) VirtualBox USB Tablet: always reports core events
[ 47.303] (**) evdev: VirtualBox USB Tablet: Device: "/dev/input/event6"
[ 47.303] (--) evdev: VirtualBox USB Tablet: Vendor 0x80ee Product 0x21
[ 47.303] (--) evdev: VirtualBox USB Tablet: Found 9 mouse buttons
[ 47.303] (--) evdev: VirtualBox USB Tablet: Found scroll wheel(s)
[ 47.303] (--) evdev: VirtualBox USB Tablet: Found relative axes
[ 47.303] (--) evdev: VirtualBox USB Tablet: Found absolute axes
[ 47.303] (--) evdev: VirtualBox USB Tablet: Found x and y absolute axes
[ 47.303] (--) evdev: VirtualBox USB Tablet: Found absolute touchscreen
[ 47.303] (II) evdev: VirtualBox USB Tablet: Configuring as touchscreen
[ 47.303] (II) evdev: VirtualBox USB Tablet: Adding scrollwheel support
[ 47.303] (**) evdev: VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 47.303] (**) evdev: VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 47.303] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input6/event6"
[ 47.304] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: TOUCHSCREEN, id 8)
[ 47.304] (WW) evdev: VirtualBox USB Tablet: touchpads, tablets and touchscreens ignore relative axes.
[ 47.304] (II) evdev: VirtualBox USB Tablet: initialized for absolute axes.
[ 47.304] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[ 47.304] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[ 47.304] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[ 47.304] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[ 47.304] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js1)
[ 47.304] (II) No input driver specified, ignoring this device.
[ 47.304] (II) This device may have been added with another device file.
[ 47.304] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse1)
[ 47.304] (II) No input driver specified, ignoring this device.
[ 47.304] (II) This device may have been added with another device file.
[ 47.305] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 47.305] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 47.305] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 47.305] (**) AT Translated Set 2 keyboard: always reports core events
[ 47.305] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 47.305] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 47.305] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 47.305] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 47.305] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 47.305] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 47.305] (**) Option "xkb_rules" "evdev"
[ 47.305] (**) Option "xkb_model" "evdev"
[ 47.305] (**) Option "xkb_layout" "us"
[ 47.305] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event4)
[ 47.305] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 47.305] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 47.305] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 47.305] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
[ 47.305] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 47.305] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 47.305] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 47.305] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 47.305] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 47.305] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 47.305] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 47.305] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 47.305] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 47.306] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 47.306] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[ 47.306] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 47.306] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 47.306] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 47.306] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 47.306] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 47.306] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 47.306] (II) No input driver specified, ignoring this device.
[ 47.306] (II) This device may have been added with another device file.
[ 47.306] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 47.306] (II) No input driver specified, ignoring this device.
[ 47.306] (II) This device may have been added with another device file.
[ 47.307] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event5)
[ 47.307] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[ 47.307] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[ 47.307] (**) VirtualBox mouse integration: always reports core events
[ 47.307] (**) evdev: VirtualBox mouse integration: Device: "/dev/input/event5"
[ 47.307] (--) evdev: VirtualBox mouse integration: Vendor 0x80ee Product 0xcafe
[ 47.307] (--) evdev: VirtualBox mouse integration: Found 1 mouse buttons
[ 47.307] (--) evdev: VirtualBox mouse integration: Found absolute axes
[ 47.307] (--) evdev: VirtualBox mouse integration: Found x and y absolute axes
[ 47.307] (--) evdev: VirtualBox mouse integration: Found absolute touchscreen
[ 47.307] (II) evdev: VirtualBox mouse integration: Configuring as touchscreen
[ 47.307] (**) evdev: VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[ 47.307] (**) evdev: VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 47.307] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event5"
[ 47.307] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: TOUCHSCREEN, id 11)
[ 47.307] (II) evdev: VirtualBox mouse integration: initialized for absolute axes.
[ 47.307] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[ 47.307] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[ 47.307] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[ 47.307] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[ 47.307] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js0)
[ 47.307] (II) No input driver specified, ignoring this device.
[ 47.307] (II) This device may have been added with another device file.
[ 49.870] (II) evdev: Power Button: Close
[ 49.870] (II) UnloadModule: "evdev"
[ 49.871] (II) evdev: Sleep Button: Close
[ 49.871] (II) UnloadModule: "evdev"
[ 49.888] (II) evdev: VirtualBox USB Tablet: Close
[ 49.888] (II) UnloadModule: "evdev"
[ 49.889] (II) evdev: AT Translated Set 2 keyboard: Close
[ 49.889] (II) UnloadModule: "evdev"
[ 49.890] (II) evdev: ImExPS/2 Generic Explorer Mouse: Close
[ 49.890] (II) UnloadModule: "evdev"
[ 49.891] (II) evdev: VirtualBox mouse integration: Close
[ 49.891] (II) UnloadModule: "evdev"
[ 50.492] Server terminated successfully (0). Closing log file.
Does anybody have any idea on what's wrong here?
]]>