# sensors-detect
after which running
sensors
gives:
nouveau-pci-0500
Adapter: PCI adapter
temp1: +0.0°C (high = +95.0°C, crit = +105.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +40.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +39.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +41.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +37.0°C (high = +80.0°C, crit = +100.0°C)
it8720-isa-0a10
Adapter: ISA adapter
in0: +0.93 V (min = +0.00 V, max = +4.08 V)
in1: +0.05 V (min = +0.00 V, max = +4.08 V)
in2: +3.18 V (min = +0.00 V, max = +4.08 V)
+5V: +2.96 V (min = +0.00 V, max = +4.08 V)
in4: +2.99 V (min = +0.00 V, max = +4.08 V)
in5: +2.96 V (min = +0.00 V, max = +4.08 V)
in6: +2.18 V (min = +0.00 V, max = +4.08 V)
5VSB: +2.86 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.28 V
fan1: 914 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 1036 RPM (min = 0 RPM)
fan4: 112500 RPM (min = -1 RPM)
fan5: 112500 RPM (min = -1 RPM)
temp1: +41.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor
temp2: +40.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor
temp3: +127.0°C (low = +0.0°C, high = +127.0°C) sensor = thermistor
cpu0_vid: +1.225 V
intrusion0: ALARM
For me the crazy temperature seems to be temp3 on the isa adapter, the temperature is set to the maximum of 127°C. The fan4 and fan5 revolutions are also non-realistic.
Could anyone else resolve this?
For the record, I am now on nouveau 1.0.6-2 and Linux 3.8.3-2.
before suspend:
cheap% sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +46.0°C (crit = +256.0°C)
temp2: +50.0°C (crit = +105.0°C)
temp3: +45.0°C (crit = +105.0°C)
temp4: +32.0°C (crit = +105.0°C)
temp5: +0.0°C (crit = +110.0°C)coretemp-isa-0000
Adapter: ISA adapter
Core 0: +55.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +55.0°C (high = +100.0°C, crit = +100.0°C)
After suspend:
cheap% sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +55.0°C (crit = +256.0°C)
temp2: +47.0°C (crit = +105.0°C)
temp3: +45.0°C (crit = +105.0°C)
temp4: +32.0°C (crit = +105.0°C)
temp5: +90.0°C (crit = +110.0°C)coretemp-isa-0000
Adapter: ISA adapter
Core 0: +51.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +52.0°C (high = +100.0°C, crit = +100.0°C)
I am confident that temp5 is not 90 degrees.
]]>uname -a
Linux cheap 3.7.3-1-ARCH #1 SMP PREEMPT Thu Jan 17 18:52:30 CET 2013 x86_64 GNU/Linux
I'm using GeForce 8800 GT (rev a2) which is driven by nouveau driver. Since last update the hibernation works not correctly. The graphic card fan stay on 100% speed after turning the pc from the sleep state. Is there any workaround? I won't use proprietary driver. Thank you!
Update:
Same problem on 3.7.4 kernel.
]]>