[root@Renote openbox]# ip link set wlp2s0 up
[root@Renote openbox]# iwconfig wlp2s0 mode managed key ********************** essid linksys
[root@Renote openbox]# ip addr add 192.168.1.69/24 dev wlp2s0
[root@Renote openbox]# ip route add default via 192.168.1.1
[root@Renote openbox]# echo nameserver 213.169.172.34 >> /etc/resolv.conf
[root@Renote openbox]# echo nameserver 213.169.172.35 >> /etc/resolv.conf
[root@Renote openbox]# ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=44 time=60.6 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=42 time=61.5 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=42 time=64.4 ms
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 60.671/62.212/64.443/1.615 ms
I'm so bloody happy!!!
Thanks for your help, you are awesome
[root@Renote openbox]# ip link set wlp2s0 up
[root@Renote openbox]# iwconfig wlp2s0 mode managed key **************************** essid linksys
[root@Renote openbox]# ip addr add 192.168.0.66/24 dev wlp2s0
[root@Renote openbox]# ip route add default via 192.168.0.254
[root@Renote openbox]# echo nameserver 213.169.172.34 >> /etc/resolv.conf
[root@Renote openbox]# echo nameserver 213.169.172.35 >> /etc/resolv.conf
But when I do a ping, i've got
[root@Renote openbox]# ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 192.168.0.66 icmp_seq=1 Destination Host Unreachable
From 192.168.0.66 icmp_seq=2 Destination Host Unreachable
From 192.168.0.66 icmp_seq=3 Destination Host Unreachable
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2008ms
pipe 3
I thought it was maybe because i set a wrong IP default adress for the gateway.
I made a route show, when I'm connected by ethernet, and I've got
[root@Renote openbox]# ip route show
default via 192.168.1.1 dev enp3s0 metric 202
192.168.1.0/24 dev enp3s0 proto kernel scope link src 192.168.1.14 metric 202
But I don't see there the IP adress of the Gateway.
Do you know what should I do?
Thanks
[root@Renote ~]# iwconfig wlp2s0 channel 11
Error for wireless request "Set Frequency" (8B04) :
SET failed on device wlp2s0 ; Device or resource busy.
[root@Renote ~]# killall dhcpcd
[root@Renote ~]# pstree
systemd─┬─2*[dbus-daemon]
├─dbus-launch
├─login───bash───startx───xinit─┬─X
│ └─openbox─┬─chromium─┬─chromium
│ │ ├─chromium───17*[{chromium}]
│ │ ├─chromium─┬─java───30*[{java}]
│ │ │ └─5*[{chromium}]
│ │ ├─chromium-sandbo───chromium─┬─chromium───11*[chromium───3*[{chromium}]]
│ │ │ └─nacl_helper_boo
│ │ └─33*[{chromium}]
│ └─urxvt───bash───sudo───su───bash───pstree
├─systemd-journal
├─systemd-logind
└─systemd-udevd
[root@Renote ~]# iwconfig wlp2s0 channel 11
Error for wireless request "Set Frequency" (8B04) :
SET failed on device wlp2s0 ; Device or resource busy.
Thanks for your help by the way, you are spending a lot of time for me, that's very nice
]]>[root@Renote ~]# pstree
systemd─┬─2*[dbus-daemon]
├─dbus-launch
├─dhcpcd
├─login───bash───startx───xinit─┬─X
│ └─openbox─┬─chromium─┬─chromium
│ │ ├─chromium───17*[{chromium}]
│ │ ├─chromium─┬─java───30*[{java}]
│ │ │ └─5*[{chromium}]
│ │ ├─chromium-sandbo───chromium─┬─chromium───11*[chromium───3*[{chromium}]]
│ │ │ └─nacl_helper_boo
│ │ └─36*[{chromium}]
│ ├─pcmanfm
│ └─urxvt───bash───sudo───su───bash───pstree
├─systemd-journal
├─systemd-logind
└─systemd-udevd
I tried killing dhcpcd but it didn't changed anything.
]]> [root@Renote ~]# iwconfig wlp2s0 channel 11
Error for wireless request "Set Frequency" (8B04) :
SET failed on device wlp2s0 ; Device or resource busy.
But I can't find the process that keep the device busy, since when i do
[root@Renote ~]# lsof | grep wlp2s0
I don't have any answers.
God damned, it's a real challenge to connect for the first time
]]>To connect to wep you can try to use iw/iwconfig directly with the 'key' parameter, but I still prefer to use wpa_supplicant. You can generate the config with wpa_passphrase, but then you'll have to manually edit it to something like the following:
network={
ssid="linksys"
scan_ssid=1
key_mgmt=NONE
psk="your network key"
}
Three caveats: This is reconstructed largely from memory; As I understand them, wep networks can vary widely in the exact parameters needed in this config file; I don't understand wep very well.
]]>I tried the manual connection steps and I've got
[root@Renote ~]# wpa_supplicant -B -i wlp2s0 -c <(wpa_passphrase "linksys" "***********************")
Successfully initialized wpa_supplicant
[root@Renote ~]# dhcpcd wlp2s0
dhcpcd[301]: version 5.6.8 starting
dhcpcd[301]: wlp2s0: waiting for carrier
dhcpcd[301]: timed out
But when I try by ethernet, it works perfectly and I've got
[root@Renote ~]# dhcpcd enp3s0
dhcpcd[509]: version 5.6.8 starting
dhcpcd[509]: enp3s0: sending IPv6 Router Solicitation
dhcpcd[509]: enp3s0: rebinding lease of 192.168.1.12
dhcpcd[509]: enp3s0: acknowledged 192.168.1.12 from 192.168.1.1
dhcpcd[509]: enp3s0: checking for 192.168.1.12
dhcpcd[509]: enp3s0: sending IPv6 Router Solicitation
dhcpcd[509]: enp3s0: leased 192.168.1.12 for 10800 seconds
dhcpcd[509]: forked to background, child pid 601
I don't understand what i'm doing wrong
]]>Others may have different approaches, but I'd make two suggestions:
1) follow the 'manual connection' steps in the wireless wiki to troubleshoot. Tools like ntctl/netcg (whichever it is now) may be handy for automating, but they hide too many details for troubleshooting. See which step in the manual connection steps fails, and with what errors.
2) if you own/manage that access point, consider switching to wpa. Wep is ill advised - not only is it really not secure, it can also be more problematic for connecting.
I've just installed Archlinux, I was under Debian and Ubuntu before.
My chipset is
gaetan@Renote ~ $ lspci -vnn | grep 14e4:
02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01)
And
gaetan@Renote ~ $ rfkill list wifi
0: hp-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
I followed the instructions here,
https://wiki.archlinux.org/index.php/Broadcom_wireless
and here
https://wiki.archlinux.org/index.php/Wi … cm80211.29
When i make the command
gaetan@Renote ~ $ sudo wifi-menu wlp2s0
I have the followinf menu
But when i press "Enter" on my network (linksys), i have the following message
Job for netctl@wlp2s0\x2dlinksys.service failed. See 'systemctl status netctl@wlp2s0\x2dlinksys.service' and 'journalctl -xn' for details.
with
gaetan@Renote ~ $ systemctl status netctl@wlp2s0\x2dlinksys.service
netctl@wlp2s0x2dlinksys.service - Networking for netctl profile wlp2s0x2dlinksys
Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static)
Active: inactive (dead)
Docs: man:netctl.profile(5)
gaetan@Renote ~ $ journalctl -xn
Hint: You are currently not seeing messages from other users and the system.
Users in the 'systemd-journal' group can see all messages. Pass -q to
turn off this notice.
-- Logs begin at lun 2013-06-24 18:33:17 CEST, end at jeu 2013-06-27 14:01:11 CE
jun 24 18:33:17 Renote sudo[580]: pam_unix(sudo:auth): authentication failure; l
-- Reboot --
jun 25 18:16:09 Renote polkit-agent-helper-1[4611]: pam_unix(polkit-1:account):
jun 25 18:23:00 Renote polkit-agent-helper-1[4968]: pam_unix(polkit-1:account):
jun 25 18:17:13 Renote polkit-agent-helper-1[5081]: pam_unix(polkit-1:account):
-- Reboot --
jun 27 14:00:45 Renote sudo[2114]: pam_unix(sudo:auth): authentication failure;
jun 27 14:01:11 Renote sudo[2114]: pam_unix(sudo:auth): conversation failed
Does anyone know what should I do?
Thanks
]]>