Sorry for all the trouble and thanks for your help
]]>I was hoping that I simply plug it in and everything works, but it does not
Same problem as before and
pacmd list-cards
pacmd list-sinks
still shows 1 card / 1 sink.
I have disable bluetooth coexistence according to https://wiki.archlinux.org/index.php/Ne … oexistence.
Output of dmesg | grep -i bluetooth
[ 2.191773] usb 1-1: Product: BCM920702 Bluetooth 4.0
[ 2.560026] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 4.174031] Bluetooth: Core ver 2.22
[ 4.174047] Bluetooth: HCI device and connection manager initialized
[ 4.174050] Bluetooth: HCI socket layer initialized
[ 4.174051] Bluetooth: L2CAP socket layer initialized
[ 4.174054] Bluetooth: SCO socket layer initialized
[ 4.189648] Bluetooth: hci1: Bootloader revision 0.0 build 26 week 38 2015
[ 4.190704] Bluetooth: hci1: Device revision is 16
[ 4.190705] Bluetooth: hci1: Secure boot is enabled
[ 4.190705] Bluetooth: hci1: OTP lock is enabled
[ 4.190706] Bluetooth: hci1: API lock is enabled
[ 4.190706] Bluetooth: hci1: Debug lock is disabled
[ 4.190707] Bluetooth: hci1: Minimum firmware build 1 week 10 2014
[ 4.191387] Bluetooth: hci1: Found device firmware: intel/ibt-12-16.sfi
[ 4.208317] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.208318] Bluetooth: BNEP filters: protocol multicast
[ 4.208321] Bluetooth: BNEP socket layer initialized
[ 4.301715] Bluetooth: hci0: BCM: chip id 63
[ 4.302726] Bluetooth: hci0: BCM: features 0x07
[ 4.318711] Bluetooth: hci0: steffen-t480s #1
[ 4.319738] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1459
[ 5.057675] Bluetooth: hci0: BCM20702A1 (001.002.014) build 1459
[ 5.073645] Bluetooth: hci0: Broadcom Bluetooth Device
[ 5.574727] Bluetooth: hci1: Waiting for firmware download to complete
[ 5.575653] Bluetooth: hci1: Firmware loaded in 1355033 usecs
[ 5.575686] Bluetooth: hci1: Waiting for device to boot
[ 5.587705] Bluetooth: hci1: Device booted in 11746 usecs
[ 5.587834] Bluetooth: hci1: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 5.590741] Bluetooth: hci1: Applying Intel DDC parameters completed
[ 5.592680] Bluetooth: hci1: Firmware revision 0.1 build 50 week 12 2019
[ 15.086782] Bluetooth: RFCOMM TTY layer initialized
[ 15.086789] Bluetooth: RFCOMM socket layer initialized
[ 15.086793] Bluetooth: RFCOMM ver 1.11
I am about to give up and return the usb dongle, if you do not have any other suggestions.
]]>3d:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
I managed to get it to work by restarting the bluetooth, removing all entries for the headphones and re-pairing. Idk which update exacty broke it, because it was a massive one, including kernel.
Cheers
]]>On my Lenovo Edge E330, where the headset does work, the wifi adapter is (found the specs online as I do not have the E330 with me at the moment):
Intel Centrino Wireless-N 2230 (b/g/n = Wi-Fi 4), Bluetooth Intel Centrino 4.0
Do you have a suggestion which version of the linux-firmware to test?
@Dheart:
You have the same network adapter and similar issues?
Do you know which update specifically caused the troubles?
I managed to set up the Bluetooth headset on another laptop of mine running Arch Linux and Cinnamon instead of KDE Plasma as desktop environment.
Worked like a charm. After pairing and connecting via bluetoothctl I found the headset in pavucontrol.
Maybe a conflict of pulseaudio and plasma sound tools?
Here is the relevant output of the commands previously asked for (but now on Cinnamon laptop):
pactl list | grep -C2 a2dp
Sink #1
State: RUNNING
Name: bluez_sink.38_18_4C_6D_EC_93.a2dp_sink
Description: WH-1000XM3
Driver: module-bluez5-device.c
--
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor Source: bluez_sink.38_18_4C_6D_EC_93.a2dp_sink.monitor
Latency: 56181 usec, configured 45317 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY
Properties:
bluetooth.protocol = "a2dp_sink"
device.description = "WH-1000XM3"
device.string = "38:18:4C:6D:EC:93"
--
Source #2
State: RUNNING
Name: bluez_sink.38_18_4C_6D_EC_93.a2dp_sink.monitor
Description: Monitor of WH-1000XM3
Driver: module-bluez5-device.c
--
balance 0,00
Base Volume: 65536 / 100% / 0,00 dB
Monitor of Sink: bluez_sink.38_18_4C_6D_EC_93.a2dp_sink
Latency: 0 usec, configured 45317 usec
Flags: DECIBEL_VOLUME LATENCY
--
Profiles:
headset_head_unit: Headset Head Unit (HSP/HFP) (sinks: 1, sources: 1, priority: 30, available: yes)
a2dp_sink: High Fidelity Playback (A2DP Sink) (sinks: 1, sources: 0, priority: 40, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: a2dp_sink
Ports:
unknown-output: Bluetooth Output (priority: 0, latency offset: 0 usec, available)
Part of profile(s): headset_head_unit, a2dp_sink
unknown-input: Bluetooth Input (priority: 0, latency offset: 0 usec)
Part of profile(s): headset_head_unit
pacmd list-cards
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf1610000 irq 35"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1b.0.analog-stereo/#0: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1b.0.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <bluez_card.38_18_4C_6D_EC_93>
driver: <module-bluez5-device.c>
owner module: 22
properties:
device.description = "WH-1000XM3"
device.string = "38:18:4C:6D:EC:93"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
bluez.path = "/org/bluez/hci0/dev_38_18_4C_6D_EC_93"
bluez.class = "0x000000"
bluez.alias = "WH-1000XM3"
device.icon_name = "audio-card-bluetooth"
profiles:
headset_head_unit: Headset Head Unit (HSP/HFP) (priority 30, available: unknown)
a2dp_sink: High Fidelity Playback (A2DP Sink) (priority 40, available: yes)
off: Off (priority 0, available: yes)
active profile: <a2dp_sink>
sinks:
bluez_sink.38_18_4C_6D_EC_93.a2dp_sink/#1: WH-1000XM3
sources:
bluez_sink.38_18_4C_6D_EC_93.a2dp_sink.monitor/#2: Monitor of WH-1000XM3
ports:
unknown-output: Bluetooth Output (priority 0, latency offset 0 usec, available: yes)
properties:
unknown-input: Bluetooth Input (priority 0, latency offset 0 usec, available: unknown)
properties:
pacmd list-sinks
2 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause: (none)
priority: 9039
volume: front-left: 36036 / 55% / -15,58 dB, front-right: 36036 / 55% / -15,58 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 39,90 ms
max request: 6 KiB
max rewind: 6 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 40,00 ms; range is 0,50 .. 2000,00 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269VC Analog"
alsa.id = "ALC269VC Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf1610000 irq 35"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "1e20"
device.product.name = "7 Series/C216 Chipset Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC269VC"
alsa.components = "HDA:10ec0269,17aa5006,00100202 HDA:80862806,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-speaker>
index: 1
name: <bluez_sink.38_18_4C_6D_EC_93.a2dp_sink>
driver: <module-bluez5-device.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY
state: RUNNING
suspend cause: (none)
priority: 9050
volume: front-left: 65536 / 100% / 0,00 dB, front-right: 65536 / 100% / 0,00 dB
balance 0,00
base volume: 65536 / 100% / 0,00 dB
volume steps: 65537
muted: no
current latency: 61,36 ms
max request: 3 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 1
linked by: 3
fixed latency: 45,32 ms
card: 1 <bluez_card.38_18_4C_6D_EC_93>
module: 22
properties:
bluetooth.protocol = "a2dp_sink"
device.description = "WH-1000XM3"
device.string = "38:18:4C:6D:EC:93"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
bluez.path = "/org/bluez/hci0/dev_38_18_4C_6D_EC_93"
bluez.class = "0x000000"
bluez.alias = "WH-1000XM3"
device.icon_name = "audio-card-bluetooth"
ports:
unknown-output: Bluetooth Output (priority 0, latency offset 0 usec, available: yes)
properties:
active port: <unknown-output>
dmesg | grep -i bluetooth
[ 9.790712] Bluetooth: Core ver 2.22
[ 9.790734] Bluetooth: HCI device and connection manager initialized
[ 9.790738] Bluetooth: HCI socket layer initialized
[ 9.790740] Bluetooth: L2CAP socket layer initialized
[ 9.790743] Bluetooth: SCO socket layer initialized
[ 9.886595] Bluetooth: hci0: unexpected event for opcode 0x0000
[ 994.475009] audit: type=1130 audit(1581342307.891:100): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 994.506186] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 994.506190] Bluetooth: BNEP filters: protocol multicast
[ 994.506199] Bluetooth: BNEP socket layer initialized
[ 1256.359454] Bluetooth: RFCOMM TTY layer initialized
[ 1256.359471] Bluetooth: RFCOMM socket layer initialized
[ 1256.359480] Bluetooth: RFCOMM ver 1.11
bluetoothctl paired-devices
Device 38:18:4C:6D:EC:93 WH-1000XM3
bluetoothctl info 38:18:4C:6D:EC:93
Device 38:18:4C:6D:EC:93 (public)
Name: WH-1000XM3
Alias: WH-1000XM3
Paired: yes
Trusted: no
Blocked: no
Connected: yes
LegacyPairing: no
UUID: Vendor specific (00000000-deca-fade-deca-deafdecacaff)
UUID: Headset (00001108-0000-1000-8000-00805f9b34fb)
UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
UUID: Vendor specific (7b265b0e-2232-4d45-bef4-bb8ae62f813d)
UUID: Vendor specific (81c2e72a-0591-443e-a1ff-05f988593351)
UUID: Vendor specific (931c7e8a-540f-4686-b798-e8df0a2ad9f7)
UUID: Vendor specific (96cc203e-5068-46ad-b32d-e316f5e069ba)
UUID: Vendor specific (b9b213ce-eeab-49e4-8fd9-aa478ed1b26b)
UUID: Vendor specific (f8d1fbe4-7966-4334-8024-ff96c9330e15)
Modalias: usb:v054Cp0CD3d0422
ManufacturerData Key: 0x012d
ManufacturerData Value:
04 00 01 31 00 01 ed 06 48 dc 00 60 d0 00 00 00 ...1....H..`....
00 00 00 ...
journalctl -b --user-unit=pulseaudio
-- Logs begin at Sat 2017-04-15 19:46:17 CEST, end at Mon 2020-02-10 14:56:38 CET. --
Feb 10 14:29:15 edge-e330 systemd[1668]: Starting Sound Service...
Feb 10 14:29:21 edge-e330 systemd[1668]: Started Sound Service.
Feb 10 14:49:23 edge-e330 systemd[1668]: pulseaudio.service: Succeeded.
Feb 10 14:49:29 edge-e330 systemd[1668]: Starting Sound Service...
Feb 10 14:49:29 edge-e330 systemd[1668]: Started Sound Service.
pacman -Qs pulseaudio
local/lib32-libpulse 13.0-1
A featureful, general-purpose sound server (32-bit client libraries)
local/libcanberra-pulse 0.30+2+gc0620e4-2
PulseAudio plugin for libcanberra
local/pavucontrol 1:4.0-1
PulseAudio Volume Control
local/pulseaudio 13.0-3
A featureful, general-purpose sound server
local/pulseaudio-alsa 2-5
ALSA Configuration for PulseAudio
local/pulseaudio-bluetooth 13.0-3
Bluetooth support for PulseAudio
dmesg | grep -i bluetooth
[ 3.028579] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 5.142482] Bluetooth: Core ver 2.22
[ 5.142548] Bluetooth: HCI device and connection manager initialized
[ 5.142555] Bluetooth: HCI socket layer initialized
[ 5.142560] Bluetooth: L2CAP socket layer initialized
[ 5.142566] Bluetooth: SCO socket layer initialized
[ 5.289795] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 5.290835] Bluetooth: hci0: Device revision is 16
[ 5.290840] Bluetooth: hci0: Secure boot is enabled
[ 5.290842] Bluetooth: hci0: OTP lock is enabled
[ 5.290845] Bluetooth: hci0: API lock is enabled
[ 5.290847] Bluetooth: hci0: Debug lock is disabled
[ 5.290851] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 5.292501] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 5.365146] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.365151] Bluetooth: BNEP filters: protocol multicast
[ 5.365160] Bluetooth: BNEP socket layer initialized
[ 6.898304] Bluetooth: hci0: Waiting for firmware download to complete
[ 6.898738] Bluetooth: hci0: Firmware loaded in 1572632 usecs
[ 6.898856] Bluetooth: hci0: Waiting for device to boot
[ 6.910835] Bluetooth: hci0: Device booted in 11741 usecs
[ 6.911067] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 6.913884] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 6.915895] Bluetooth: hci0: Firmware revision 0.1 build 50 week 12 2019
[ 52.912253] Bluetooth: RFCOMM TTY layer initialized
[ 52.912270] Bluetooth: RFCOMM socket layer initialized
[ 52.912281] Bluetooth: RFCOMM ver 1.11
bluetoothctl paired-devices
Device 38:18:4C:6D:EC:93 LE_WH-1000XM3
bluetoothctl info 38:18:4C:6D:EC:93
Device 38:18:4C:6D:EC:93 (public)
Name: LE_WH-1000XM3
Alias: LE_WH-1000XM3
Paired: yes
Trusted: no
Blocked: no
Connected: yes
LegacyPairing: no
UUID: Vendor specific (00000000-deca-fade-deca-deafdecacaff)
UUID: Headset (00001108-0000-1000-8000-00805f9b34fb)
UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
UUID: Unknown (0000fe03-0000-1000-8000-00805f9b34fb)
UUID: Vendor specific (5b833e05-6bc7-4802-8e9a-723ceca4bd8f)
UUID: Vendor specific (5b833e06-6bc7-4802-8e9a-723ceca4bd8f)
UUID: Vendor specific (69a7f243-e52f-4443-a7f9-cb4d053c74d6)
UUID: Vendor specific (7b265b0e-2232-4d45-bef4-bb8ae62f813d)
UUID: Vendor specific (81c2e72a-0591-443e-a1ff-05f988593351)
UUID: Vendor specific (91c10d9c-aaef-42bd-b6d6-8a648c19213d)
UUID: Vendor specific (931c7e8a-540f-4686-b798-e8df0a2ad9f7)
UUID: Vendor specific (96cc203e-5068-46ad-b32d-e316f5e069ba)
UUID: Vendor specific (b9b213ce-eeab-49e4-8fd9-aa478ed1b26b)
UUID: Vendor specific (f8d1fbe4-7966-4334-8024-ff96c9330e15)
UUID: Vendor specific (fe59bfa8-7fe3-4a05-9d94-99fadc69faff)
Modalias: usb:v054Cp0CD3d0422
journalctl -b --user-unit=pulseaudio
-- Logs begin at Fri 2019-02-22 08:47:37 CET, end at Fri 2020-02-07 19:30:35 CET. --
Feb 07 18:41:20 steffen-t480s systemd[1327]: Starting Sound Service...
Feb 07 18:41:20 steffen-t480s systemd[1327]: Started Sound Service.
pacman -Qs pulseaudio
local/libcanberra-pulse 0.30+2+gc0620e4-2
PulseAudio plugin for libcanberra
local/pavucontrol 1:4.0-1
PulseAudio Volume Control
local/plasma-pa 5.17.5-1 (plasma)
Plasma applet for audio volume management using PulseAudio
local/pulseaudio 13.0-3
A featureful, general-purpose sound server
local/pulseaudio-alsa 2-5
ALSA Configuration for PulseAudio
local/pulseaudio-bluetooth 13.0-3
Bluetooth support for PulseAudio
dmesg | grep -i bluetooth
bluetoothctl paired-devices
bluetoothctl info $devicelistedabove$
journalctl -b --user-unit=pulseaudio
pacman -Qs pulseaudio
]]>>> pactl list | grep -C2 a2dp
(still no return)
output of
>>pacmd list-cards
1 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1f.3>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xed248000 irq 141"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d71"
device.product.name = "Sunrise Point-LP HD Audio"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 65, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6500, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6565, available: unknown)
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5900, available: no)
output:hdmi-stereo+input:analog-stereo: Digital Stereo (HDMI) Output + Analog Stereo Input (priority 5965, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround+input:analog-stereo: Digital Surround 5.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 800, available: no)
output:hdmi-surround71+input:analog-stereo: Digital Surround 7.1 (HDMI) Output + Analog Stereo Input (priority 865, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5700, available: no)
output:hdmi-stereo-extra1+input:analog-stereo: Digital Stereo (HDMI 2) Output + Analog Stereo Input (priority 5765, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround-extra1+input:analog-stereo: Digital Surround 5.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 600, available: no)
output:hdmi-surround71-extra1+input:analog-stereo: Digital Surround 7.1 (HDMI 2) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5700, available: no)
output:hdmi-stereo-extra2+input:analog-stereo: Digital Stereo (HDMI 3) Output + Analog Stereo Input (priority 5765, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround-extra2+input:analog-stereo: Digital Surround 5.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 600, available: no)
output:hdmi-surround71-extra2+input:analog-stereo: Digital Surround 7.1 (HDMI 3) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5700, available: no)
output:hdmi-stereo-extra3+input:analog-stereo: Digital Stereo (HDMI 4) Output + Analog Stereo Input (priority 5765, available: no)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround-extra3+input:analog-stereo: Digital Surround 5.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 600, available: no)
output:hdmi-surround71-extra3+input:analog-stereo: Digital Surround 7.1 (HDMI 4) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5700, available: no)
output:hdmi-stereo-extra4+input:analog-stereo: Digital Stereo (HDMI 5) Output + Analog Stereo Input (priority 5765, available: no)
output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 600, available: no)
output:hdmi-surround-extra4+input:analog-stereo: Digital Surround 5.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 600, available: no)
output:hdmi-surround71-extra4+input:analog-stereo: Digital Surround 7.1 (HDMI 5) Output + Analog Stereo Input (priority 665, available: no)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_1f.3.analog-stereo/#0: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_1f.3.analog-stereo.monitor/#0: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_1f.3.analog-stereo/#1: Built-in Audio Analog Stereo
ports:
analog-input-internal-mic: Internal Microphone (priority 8900, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
output of
>> pacmd list-sinks
1 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1f.3.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9039
volume: front-left: 36043 / 55% / -15.58 dB, front-right: 36043 / 55% / -15.58 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.pci-0000_00_1f.3>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC257 Analog"
alsa.id = "ALC257 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xed248000 irq 141"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1f.3"
sysfs.path = "/devices/pci0000:00/0000:00:1f.3/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "9d71"
device.product.name = "Sunrise Point-LP HD Audio"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC257"
alsa.components = "HDA:10ec0257,17aa2258,00100001 HDA:8086280b,80860101,00100000"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-speaker: Speakers (priority 10000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-speakers"
analog-output-headphones: Headphones (priority 9900, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-speaker>
That said, is pulseaudio-bluetooth installed? and what are your outputs for
pacmd list-cards
pacmd list-sinks
in [ code ] [ /code ] tags.
]]>I wanted to connect my Sony WH-100xm3 headphones via bluetooth to my Lenovo T480s.
I followed the configuration as described to connect the headphones.
It also worked in the plasma system settings to connect them.
However, I cannot select the headphones (even when bluetooth is connected) in pavucontrol as output devices.
Only "Speakers" and "Headphones (unplugged)" is available under output devices.
>> pactl list | grep -C2 A2DP
returns nothing.
When I plug them in, it works. But I want to use them via bluetooth.
Any ideas?
]]>