- /etc/modprobe.d/blacklistUas.conf
options usb-storage quirks=Vendor_ID:Product_ID:u
- mkinitcpio -p linux
- reboot
Thanks again!
]]>I connect the drive in my arch and the activity light works. But i hear some beeping, only in the beginning.
So, i can only see the drive with lsusb
lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 033: ID 174c:55aa ASMedia Technology Inc. ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 5986:0400 Acer, Inc BisonCam, NB Pro
Bus 003 Device 002: ID 0bda:8723 Realtek Semiconductor Corp. RTL8723A Bluetooth
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
nothing else (no lsblk, fdisk,chdisk,testdisk etc)
lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 238.5G 0 disk
├─sda1 8:1 0 512M 0 part
├─sda2 8:2 0 40G 0 part /
└─sda3 8:3 0 198G 0 part /home
sr0 11:0 1 1024M 0 rom
mmcblk0 179:0 0 29.7G 0 disk
└─mmcblk0p1 179:1 0 29.7G 0 part
Also, i notice that there is a loop in kernel messages while the activity light keeps working
dmesg | tail
[ 6683.910795] usb 4-3: USB disconnect, device number 17
[ 6687.690831] usb 4-3: new SuperSpeed USB device number 18 using xhci_hcd
[ 6687.708141] usb 4-3: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 6687.708156] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 6687.708162] usb 4-3: Product: USB 3.0 Device
[ 6687.708166] usb 4-3: Manufacturer: Intenso
[ 6687.708170] usb 4-3: SerialNumber: 3150000000000000326A
[ 6687.709563] usb-storage 4-3:1.0: USB Mass Storage device detected
[ 6687.709843] usb-storage 4-3:1.0: Quirks match for vid 174c pid 55aa: 400000
[ 6687.709967] scsi host6: usb-storage 4-3:1.0
and
dmesg | tail
[ 6687.708156] usb 4-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 6687.708162] usb 4-3: Product: USB 3.0 Device
[ 6687.708166] usb 4-3: Manufacturer: Intenso
[ 6687.708170] usb 4-3: SerialNumber: 3150000000000000326A
[ 6687.709563] usb-storage 4-3:1.0: USB Mass Storage device detected
[ 6687.709843] usb-storage 4-3:1.0: Quirks match for vid 174c pid 55aa: 400000
[ 6687.709967] scsi host6: usb-storage 4-3:1.0
[ 6715.638337] usb 4-3: Disable of device-initiated U1 failed.
[ 6720.758536] usb 4-3: Disable of device-initiated U2 failed.
[ 6720.882191] usb 4-3: reset SuperSpeed USB device number 18 using xhci_hcd
Any ideas...?
]]>