You can download the nmap package and usb-walk it onto the system (or download and install them w/ the install iso)
However, first provide the requested output after removing the static IP config (if you have added such, which you would please confirm or deny)
Specifically, then only option you should add to the configuration in post #1 is the EnableNetworkConfiguration setting. Nothing else.
When that works (e.g. ping 8.8.8.8), then you can continue with configuring the DNS resolver.
I'm sorry, but what do you mean different options?
from your ip a/r output I guess you copy-and-failed the static server config example?
Don't (because that's 99.99% not the correct values) and post an updated
ip a; ip r
Also (after removing the static server config and restarting iwd/rebooting)
sudo nmap --script broadcast-dhcp-discover
The article describes different options. It would help if you could tell us what you did.
I'm sorry, but what do you mean different options? I might not notice about it.
And here's the ip things:
$ ip address
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default q len 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp2s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN groupdefault qlen1000
link/ether 88:a4:c2:3f:38:c1 brd ff:ff:ff:ff:ff:ff
4. wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether e0:0a:f6:54:e4:61: brd ff:ff:ff:ff:ff:ff
inet 192.168.1.10/24 brd 192.168.1.255 scope global noprefixroute wlan0
valid_lft forever preferred_lft forever
inet6 fe80::e20a:f6ff:fe54:e461/64 scope link
valid_lft forever preferred_lft forever
$ ip route
default via 192.168.1.1 dev wlan0 proto static metric 304
192.168.1.0/24 dev wlan0 proto static scope link src 192.168.1.10
$ ip -6 route
::1 dev lo proto kernel metric 256 pref medium
fe80::/64 dev wlan0 proto kernel metric 256 pref medium
$ ip address
$ ip route
$ ip -6 route
You've a carrier but no lease.
https://wiki.archlinux.org/title/Iwd#En … figuration or use dhcpcd/dhclient etc.
I followed the link to setup files and there's a new question.
When I ping it, it comes out
$ ping google.com
ping: google.com Name or service not known
$ ping 8.8.8.8
From 192.168.1.10 icmp_seq=1 Destination Host Unreachable
$ iwctl
NetworkConfigurationEnabled: disabled
StateDirectory: /var/lib/iwd
Version: 1.24
[iwd]#
here's my "ip a"
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default q len 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp2s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWNgroupdefault qlen1000
link/ether 88:a4:c2:3f:38:c1 brd ff:ff:ff:ff:ff:ff
4.wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether e0:0a:f6:54:e4:61: brd ff:ff:ff:ff:ff:ff
inet6 fe80::e20a:f6ff:fe54:e461/64 scope link
valid_lft forever preferred_lft forever
If you need anything else I'll try to show it. Thanks!
]]>