All is now hunky-dory.
Thank you everyone for trying to help it is much appreciated.
]]>Welcome to the forums. I abused my moderator powers to edit your post to add BBCode CODE tags around your program output. We ask that you do this as a courtesy to your reader. That link is also available under every post box on the forums. You can edit your post to see what I did.
Thank you I will try to be good in future...
Does your firmware setup (erroneously called the 'BIOS Screen') have any mention of software RAID? It may be that the old drive was configured as part of said RAID.
NVMe raid mode is disabled in the firmware setup so I don't think this is the issue.
Do you have any other ideas?
]]>Does your firmware setup (erroneously called the 'BIOS Screen') have any mention of software RAID? It may be that the old drive was configured as part of said RAID.
]]>Does anyone have any idea what could be wrong. Could it be a defective SSD? Smartctl says it is OK
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.0.9-arch1-1] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]
=== START OF INFORMATION SECTION ===
Model Number: CT500P3SSD8
Serial Number: 2241E6784789
Firmware Version: P9CR30A
PCI Vendor/Subsystem ID: 0xc0a9
IEEE OUI Identifier: 0x00a075
Controller ID: 1
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 500,107,862,016 [500 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 6479a7 6cc0000099
Local Time is: Sun Nov 20 12:00:11 2022 GMT
Firmware Updates (0x12): 1 Slot, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x06): Cmd_Eff_Lg Ext_Get_Lg
Maximum Data Transfer Size: 64 Pages
Warning Comp. Temp. Threshold: 85 Celsius
Critical Comp. Temp. Threshold: 95 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 6.00W 0.0000W - 0 0 0 0 0 0
1 + 3.00W 0.0000W - 0 0 0 0 0 0
2 + 1.50W 0.0000W - 0 0 0 0 0 0
3 - 0.0250W 0.0000W - 3 3 3 3 5000 1900
4 - 0.0030W - - 4 4 4 4 13000 100000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 1
1 - 4096 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 28 Celsius
Available Spare: 100%
Available Spare Threshold: 5%
Percentage Used: 0%
Data Units Read: 2,298 [1.17 GB]
Data Units Written: 78,925 [40.4 GB]
Host Read Commands: 32,727
Host Write Commands: 165,673
Controller Busy Time: 0
Power Cycles: 8
Power On Hours: 12
Unsafe Shutdowns: 2
Media and Data Integrity Errors: 0
Error Information Log Entries: 19
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 28 Celsius
Temperature Sensor 2: 38 Celsius
Temperature Sensor 8: 28 Celsius
Error Information (NVMe Log 0x01, 16 of 16 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 19 0 0x6008 0x4005 0x028 0 0 -