[SOLVED] Why is my wireless card sometimes disabled

sexyzero · 2010-09-12 14:59:20

Hello,

This is my first post. I have a Broadcom Corporation Device 4727 (rev 01) wireless card (that's the result I get from lspci | grep Network

According to http://wiki.archlinux.org/index.php/Bro … hese_cards

My driver is listed there and I have to install from the AUR broadcom-wl

That is done

And the module section of my rc.conf looks like: MODULES=(lib80211_crypt_tkip wl !b43 !ssb ...

AND TADA , my wireless card is now working "part time"

The times when its disabled at boot, I can't even enable it

What can I do?

Last edited by sexyzero (2010-09-12 15:57:37)

.:B:. · 2010-09-12 15:29:35

Check your boot log (dmesg) for pointers when that happens.

sexyzero · 2010-09-12 15:48:47

Here's what I get when it's not working

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Fri Aug 27 17:14:28 CEST 2010
Command line: root=/dev/disk/by-uuid/587591bd-f15c-4439-9fd7-a57ca8a0a8ce ro i915.modeset=1
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
 BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000009b63f000 (usable)
 BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved)
 BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS)
 BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data)
 BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable)
 BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000158000000 (usable)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x158000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-EFFFF write-through
  F0000-FFFFF write-combining
MTRR variable ranges enabled:
  0 base 000000000 mask F80000000 write-back
  1 base 0FFE00000 mask FFFE00000 write-protect
  2 base 080000000 mask FE0000000 write-back
  3 base 09C000000 mask FFC000000 uncachable
  4 base 09B800000 mask FFF800000 uncachable
  5 base 100000000 mask F80000000 write-back
  6 base 158000000 mask FF8000000 uncachable
  7 base 160000000 mask FE0000000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0x9b800 max_arch_pfn = 0x400000000
e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009d000 (usable)
 modified: 000000000009d000 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000009b63f000 (usable)
 modified: 000000009b63f000 - 000000009b6bf000 (reserved)
 modified: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS)
 modified: 000000009b7bf000 - 000000009b7ff000 (ACPI data)
 modified: 000000009b7ff000 - 000000009b800000 (usable)
 modified: 000000009b800000 - 00000000a0000000 (reserved)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000feb00000 - 00000000feb04000 (reserved)
 modified: 00000000fec00000 - 00000000fec01000 (reserved)
 modified: 00000000fed10000 - 00000000fed14000 (reserved)
 modified: 00000000fed18000 - 00000000fed1a000 (reserved)
 modified: 00000000fed1b000 - 00000000fed20000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000ffe00000 - 0000000100000000 (reserved)
 modified: 0000000100000000 - 0000000158000000 (usable)
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000009b800000
 0000000000 - 009b800000 page 2M
kernel direct mapping tables up to 9b800000 @ 16000-1a000
init_memory_mapping: 0000000100000000-0000000158000000
 0100000000 - 0158000000 page 2M
kernel direct mapping tables up to 158000000 @ 18000-1f000
RAMDISK: 37e0a000 - 37ff0000
ACPI: RSDP 00000000000fe020 00024 (v02 HP    )
ACPI: XSDT 000000009b7fe120 0008C (v01 HPQOEM SLIC-MPC 00000001      01000013)
ACPI: FACP 000000009b7fc000 000F4 (v04 HP     SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 000000009b7ea000 0E9EE (v02 HP     SLIC-MPC 00000001 MSFT 01000013)
ACPI: FACS 000000009b75f000 00040
ACPI: ASF! 000000009b7fd000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: HPET 000000009b7fb000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: APIC 000000009b7fa000 0008C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: MCFG 000000009b7f9000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SLIC 000000009b7e9000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 000000009b7e7000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117)
ACPI: SSDT 000000009b7e6000 00172 (v01  VaRef  Va_Acpi 00003000 INTL 20051117)
ACPI: BOOT 000000009b7e5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 000000009b7e4000 00C39 (v01 INTEL   SataPri 00001000 INTL 20051117)
ACPI: SSDT 000000009b7e3000 006C5 (v01 INTEL   SataSec 00001000 INTL 20051117)
ACPI: ASPT 000000009b7e2000 00034 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: SSDT 000000009b7e1000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880002000000-ffff8800057fffff] on node 0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00158000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0009b63f
    0: 0x0009b7ff -> 0x0009b800
    0: 0x00100000 -> 0x00158000
On node 0 totalpages: 996813
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3925 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 618104 pages, LIFO batch:31
  Normal zone: 4928 pages used for memmap
  Normal zone: 355520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [1a200 - 1a9ff]
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000
PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000
PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000
PM: Registered nosave memory: 000000009b800000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1b000
PM: Registered nosave memory: 00000000fed1b000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88832 r8192 d21760 u262144
early_res array is doubled to 128 at [1aa00 - 1b9ff]
pcpu-alloc: s88832 r8192 d21760 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 977549
Kernel command line: root=/dev/disk/by-uuid/587591bd-f15c-4439-9fd7-a57ca8a0a8ce ro i915.modeset=1
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Subtract (66 early reservations)
  #1 [0001000000 - 00016f9598]   TEXT DATA BSS
  #2 [0037e0a000 - 0037ff0000]         RAMDISK
  #3 [000009d000 - 0000100000]   BIOS reserved
  #4 [00016fa000 - 00016fa2e2]             BRK
  #5 [0000010000 - 0000012000]      TRAMPOLINE
  #6 [0000012000 - 0000016000]     ACPI WAKEUP
  #7 [0000016000 - 0000018000]         PGTABLE
  #8 [0000018000 - 000001a000]         PGTABLE
  #9 [00016fa300 - 00016fb300]         BOOTMEM
  #10 [000001a000 - 000001a1f0]         BOOTMEM
  #11 [0001efc000 - 0001efd000]         BOOTMEM
  #12 [0001efd000 - 0001efe000]         BOOTMEM
  #13 [0002000000 - 0005800000]        MEMMAP 0
  #14 [00016fb300 - 0001713300]         BOOTMEM
  #15 [0001713300 - 000172b300]         BOOTMEM
  #16 [000172b300 - 0001743300]         BOOTMEM
  #17 [0001744000 - 0001745000]         BOOTMEM
  #18 [00016f95c0 - 00016f9601]         BOOTMEM
  #19 [00016f9640 - 00016f9683]         BOOTMEM
  #20 [00016f96c0 - 00016f9ae8]         BOOTMEM
  #21 [00016f9b00 - 00016f9b68]         BOOTMEM
  #22 [00016f9b80 - 00016f9be8]         BOOTMEM
  #23 [00016f9c00 - 00016f9c68]         BOOTMEM
  #24 [00016f9c80 - 00016f9ce8]         BOOTMEM
  #25 [00016f9d00 - 00016f9d68]         BOOTMEM
  #26 [00016f9d80 - 00016f9de8]         BOOTMEM
  #27 [00016f9e00 - 00016f9e68]         BOOTMEM
  #28 [00016f9e80 - 00016f9ee8]         BOOTMEM
  #29 [00016f9f00 - 00016f9f68]         BOOTMEM
  #30 [00016f9f80 - 00016f9fe8]         BOOTMEM
  #31 [0001743300 - 0001743368]         BOOTMEM
  #32 [0001743380 - 00017433e8]         BOOTMEM
  #33 [0001743400 - 0001743468]         BOOTMEM
  #34 [0001743480 - 00017434e8]         BOOTMEM
  #35 [0001743500 - 0001743568]         BOOTMEM
  #36 [0001743580 - 00017435e8]         BOOTMEM
  #37 [0001743600 - 0001743668]         BOOTMEM
  #38 [0001743680 - 00017436e8]         BOOTMEM
  #39 [0001743700 - 0001743720]         BOOTMEM
  #40 [0001743740 - 0001743760]         BOOTMEM
  #41 [0001743780 - 00017437a0]         BOOTMEM
  #42 [00017437c0 - 000174380e]         BOOTMEM
  #43 [0001743840 - 000174388e]         BOOTMEM
  #44 [0001800000 - 000181d000]         BOOTMEM
  #45 [0001840000 - 000185d000]         BOOTMEM
  #46 [0001880000 - 000189d000]         BOOTMEM
  #47 [00018c0000 - 00018dd000]         BOOTMEM
  #48 [0001900000 - 000191d000]         BOOTMEM
  #49 [0001940000 - 000195d000]         BOOTMEM
  #50 [0001980000 - 000199d000]         BOOTMEM
  #51 [00019c0000 - 00019dd000]         BOOTMEM
  #52 [00017438c0 - 00017438c8]         BOOTMEM
  #53 [0001743900 - 0001743908]         BOOTMEM
  #54 [0001743940 - 0001743960]         BOOTMEM
  #55 [0001743980 - 00017439c0]         BOOTMEM
  #56 [00017439c0 - 0001743ae0]         BOOTMEM
  #57 [0001743b00 - 0001743b48]         BOOTMEM
  #58 [0001743b80 - 0001743bc8]         BOOTMEM
  #59 [0001745000 - 000174d000]         BOOTMEM
  #60 [00019dd000 - 0001ddd000]         BOOTMEM
  #61 [0005800000 - 0005a00000]         BOOTMEM
  #62 [0005a00000 - 0009a00000]         BOOTMEM
  #63 [000174d000 - 000176d000]         BOOTMEM
  #64 [000176d000 - 00017ad000]         BOOTMEM
  #65 [000001ba00 - 0000023a00]         BOOTMEM
Memory: 3847408k/5636096k available (3543k kernel code, 1648844k absent, 139844k reserved, 1834k data, 488k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
NR_IRQS:768
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 40632320 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2261.159 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4524.74 BogoMIPS (lpj=7537196)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
ACPI: Core revision 20100428
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz stepping 02
Booting Node   0, Processors  #1
CPU1: Thermal monitoring handled by SMI
 #2
CPU2: Thermal monitoring handled by SMI
 #3
CPU3: Thermal monitoring handled by SMI
Brought up 4 CPUs
Total of 4 processors activated (18095.92 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 000000009b691918 00443 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00443 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 000000009b68f018 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00891 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 000000009b690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 000000009b68ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [FN00] (on)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 8 1f 
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff]
pci 0000:00:02.0: reg 10: [mem 0xb0000000-0xb03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x3050-0x3057]
pci 0000:00:16.0: reg 10: [mem 0xb4406100-0xb440610f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xb4405c00-0xb4405fff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xb4400000-0xb4403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xb4405800-0xb4405bff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0x3048-0x304f]
pci 0000:00:1f.2: reg 14: [io  0x305c-0x305f]
pci 0000:00:1f.2: reg 18: [io  0x3040-0x3047]
pci 0000:00:1f.2: reg 1c: [io  0x3058-0x305b]
pci 0000:00:1f.2: reg 20: [io  0x3020-0x303f]
pci 0000:00:1f.2: reg 24: [mem 0xb4405000-0xb44057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xb4406000-0xb44060ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x3000-0x301f]
pci 0000:00:1f.6: reg 10: [mem 0xb4404000-0xb4404fff 64bit]
pci 0000:01:00.0: reg 10: [io  0x2000-0x20ff]
pci 0000:01:00.0: reg 18: [mem 0xb0404000-0xb0404fff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xb0400000-0xb0403fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xb3400000-0xb43fffff]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0xb2400000-0xb2403fff 64bit]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.1:   bridge window [mem 0xb2400000-0xb33fffff]
pci 0000:00:1c.1:   bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
\_SB_.PCI0:_OSC invalid UUID
_OSC request data:1 19 1f 
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
pci_bus 0000:ff: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d000 - 000000000009ffff 
reserve RAM buffer: 000000009b63f000 - 000000009bffffff 
reserve RAM buffer: 000000009b800000 - 000000009bffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:05: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io  0x1000-0x1fff]
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [io  0x0680-0x069f] has been reserved
system 00:05: [io  0x0800-0x080f] has been reserved
system 00:05: [io  0x0810-0x0813] has been reserved
system 00:05: [io  0xffff] has been reserved
system 00:05: [io  0x0400-0x047f] has been reserved
system 00:05: [io  0x0500-0x0501] has been reserved
system 00:05: [io  0x0700-0x077f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0a: [mem 0xb4500000-0xb4500fff] has been reserved
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xb3400000-0xb43fffff]
pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.1:   bridge window [mem 0xb2400000-0xb33fffff]
pci 0000:00:1c.1:   bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xb3400000-0xb43fffff]
pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb13fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xb2400000-0xb33fffff]
pci_bus 0000:02: resource 2 [mem 0xb1400000-0xb23fffff 64bit pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0xa0000000-0xfeafffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1944k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880005a00000 - ffff880009a00000
software IO TLB at phys 0x5a00000 - 0x9a00000
Simple Boot Flag at 0x44 set to 0x1
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1284291643.989:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7518
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
ERST: Table is not found!
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 488k freed
udev[52]: starting version 162
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: no more MTRRs available
[drm] MTRR allocation failed.  Graphics performance may suffer.
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] set up 31M of stolen space
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
acpi device:01: registered as cooling_device0
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst 
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405180 irq 43
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405300 irq 43
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9500420AS, 0006HPM1, max UDMA/100
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
ata2.00: ATAPI: hp       CDDVDW TS-U633F, HH05, max UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      ST9500420AS      0006 PQ: 0 ANSI: 5
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM            hp       CDDVDW TS-U633F  HH05 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
udev[1267]: starting version 162
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'TKIP'
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
r8169 0000:01:00.0: setting latency timer to 64
r8169 0000:01:00.0: irq 44 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc9001037e000, d8:d3:85:39:f7:3e, XID 083000c0 IRQ 44
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
wl: module license 'Mixed/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
wl 0000:02:00.0: setting latency timer to 64
eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36 
loop: module loaded
input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ACPI: resource 0000:00:1f.3 [io  0x3000-0x301f] conflicts with ACPI region SMBI [??? 0x00003000-0x0000300f flags 0xffff880157dee058]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb4405c00
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 20, io mem 0xb4405800
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 4 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa054a560
vboxdrv: fAsync=0 offMin=0x1fc offMax=0xb57
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.8 (interface 0x00140001).
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: WMI: Mapper loaded
usb 1-1: new high speed USB device using ehci_hcd and address 2
fuse init (API version 7.14)
ACPI: AC Adapter [AC] (off-line)
ACPI: Battery Slot [BAT0] (battery present)
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (50 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (40 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [TZ02] (0 C)
lis3lv02d: laptop model unknown, using default axes configuration
lis3lv02d: 8 bits sensor found
usb 2-1: new high speed USB device using ehci_hcd and address 2
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
Registered led device: hp::hddprotect
lis3lv02d driver loaded.
ACPI: Fan [FAN0] (on)
Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000/0x5a0400
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.4: new full speed USB device using ehci_hcd and address 3
input: HP WMI hotkeys as /devices/virtual/input/input10
usb 2-1.6: new full speed USB device using ehci_hcd and address 3
usb 2-1.6: new high speed USB device using ehci_hcd and address 4
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a28)
input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Adding 265068k swap on /dev/sda2.  Priority:-1 extents:1 across:265068k 
r8169 0000:01:00.0: eth0: link down

falconindy · 2010-09-12 15:54:42

I notice that it's showing up as eth1 in your dmesg log. Are you expecting it to be eth1 or eth0? There's a troubleshooting section on the Wiki that covers what to do when the interfaces are swapping names on boot.

sexyzero · 2010-09-12 15:57:11

You are right, I expected it to be eth0 all the times
Thanks falconindy may God bless you & .:B:.

Arch Linux

#1 2010-09-12 14:59:20

[SOLVED] Why is my wireless card sometimes disabled

#2 2010-09-12 15:29:35

Re: [SOLVED] Why is my wireless card sometimes disabled

#3 2010-09-12 15:48:47

Re: [SOLVED] Why is my wireless card sometimes disabled

#4 2010-09-12 15:54:42

Re: [SOLVED] Why is my wireless card sometimes disabled

#5 2010-09-12 15:57:11

Re: [SOLVED] Why is my wireless card sometimes disabled

Board footer