You are not logged in.
Pages: 1
Hey guys
I first installed Arch using my onboard G41 x4500 intel drivers. All was great, I then bought myself a new ATi HD5830. I went to the ati website and downloaded the newest linux driver. I booted to command line so I was out of X (Gnome) ran ./ati-driver-name-here
It all seemed to install, but after a reboot all the booting text is now large and it boots into the command line and not Gnome.
Anyone have any ideas how I can get it working again with the proper ati drivers from ati website?
I tried to load gnome from command line and the error was cannot open display.
Thanks for any help.
Offline
Well, first and foremost, we strongly recommend using packages from the repositories. Is there no package for your video card?
Second, posting the error messages here would help us to help you.
zʇıɹɟʇıɹʞsuɐs AUR || Cycling in Budapest with a helmet camera || Revised log levels proposal: "FYI" "WTF" and "OMG" (John Barnette)
Offline
I am moved to direct you to search the AUR for catalyst-utils, the prepackaged and preconfigured fglrx driver for Radeon cards. As in, don't use the one directly off the site because it sucks
Team Ignition Kernel Developer
linux-ideapad developer/maintainer
Flame Kernel developer for Galaxy Nexus and Galaxy S3
Want a cheap, reliable VPS with AWESOME customer service?
Offline
Hi
Thanks for the help so far guys.
I installed catalyst-utils from the AUR. Installed with no errors. I did aticonfig --initial which worked ok. Did a reboot it booted up, got a black screen for a few secs then it went back to command line. I typed gnome-session again and got the error cannot open display.
Not sure what other errors I can give. Maybe my Xorg?
[ 33.178]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 33.178] X Protocol Version 11, Revision 0
[ 33.178] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 33.178] Current Operating System: Linux voorhees 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 20:29:33 CEST 2011 x86_64
[ 33.178] Kernel command line: root=/dev/sda3 ro nomodeset
[ 33.178] Build Date: 16 April 2011 12:02:01PM
[ 33.178]
[ 33.178] Current version of pixman: 0.20.2
[ 33.178] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 33.178] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.178] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 4 11:41:48 2011
[ 33.178] (==) Using config file: "/etc/X11/xorg.conf"
[ 33.178] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 33.179] (==) ServerLayout "aticonfig Layout"
[ 33.179] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 33.179] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 33.179] (**) | |-->Device "aticonfig-Device[0]-0"
[ 33.179] (==) Automatically adding devices
[ 33.179] (==) Automatically enabling devices
[ 33.179] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 33.179] Entry deleted from font path.
[ 33.179] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 33.179] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 33.179] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 33.179] (II) Loader magic: 0x7d6fa0
[ 33.179] (II) Module ABI versions:
[ 33.179] X.Org ANSI C Emulation: 0.4
[ 33.179] X.Org Video Driver: 10.0
[ 33.179] X.Org XInput driver : 12.2
[ 33.179] X.Org Server Extension : 5.0
[ 33.179] (--) PCI:*(0:1:0:0) 1002:689e:174b:e177 rev 0, Mem @ 0xd0000000/268435456, 0xfdec0000/131072, I/O @ 0x0000ce00/256, BIOS @ 0x????????/131072
[ 33.179] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 33.179] (II) "extmod" will be loaded by default.
[ 33.179] (II) "dbe" will be loaded by default.
[ 33.179] (II) "glx" will be loaded by default.
[ 33.179] (II) "record" will be loaded by default.
[ 33.179] (II) "dri" will be loaded by default.
[ 33.179] (II) "dri2" will be loaded by default.
[ 33.180] (II) LoadModule: "extmod"
[ 33.180] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 33.180] (II) Module extmod: vendor="X.Org Foundation"
[ 33.180] compiled for 1.10.1, module version = 1.0.0
[ 33.180] Module class: X.Org Server Extension
[ 33.180] ABI class: X.Org Server Extension, version 5.0
[ 33.180] (II) Loading extension MIT-SCREEN-SAVER
[ 33.180] (II) Loading extension XFree86-VidModeExtension
[ 33.180] (II) Loading extension XFree86-DGA
[ 33.180] (II) Loading extension DPMS
[ 33.180] (II) Loading extension XVideo
[ 33.180] (II) Loading extension XVideo-MotionCompensation
[ 33.180] (II) Loading extension X-Resource
[ 33.180] (II) LoadModule: "dbe"
[ 33.180] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 33.180] (II) Module dbe: vendor="X.Org Foundation"
[ 33.180] compiled for 1.10.1, module version = 1.0.0
[ 33.180] Module class: X.Org Server Extension
[ 33.180] ABI class: X.Org Server Extension, version 5.0
[ 33.180] (II) Loading extension DOUBLE-BUFFER
[ 33.180] (II) LoadModule: "glx"
[ 33.181] (II) Loading /usr/lib/xorg/modules/extensions/fglrx/libglx.so
[ 33.181] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 33.181] compiled for 6.9.0, module version = 1.0.0
[ 33.181] (II) Loading extension GLX
[ 33.181] (II) LoadModule: "record"
[ 33.181] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 33.181] (II) Module record: vendor="X.Org Foundation"
[ 33.181] compiled for 1.10.1, module version = 1.13.0
[ 33.181] Module class: X.Org Server Extension
[ 33.181] ABI class: X.Org Server Extension, version 5.0
[ 33.181] (II) Loading extension RECORD
[ 33.181] (II) LoadModule: "dri"
[ 33.181] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 33.182] (II) Module dri: vendor="X.Org Foundation"
[ 33.182] compiled for 1.10.1, module version = 1.0.0
[ 33.182] ABI class: X.Org Server Extension, version 5.0
[ 33.182] (II) Loading extension XFree86-DRI
[ 33.182] (II) LoadModule: "dri2"
[ 33.182] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 33.182] (II) Module dri2: vendor="X.Org Foundation"
[ 33.182] compiled for 1.10.1, module version = 1.2.0
[ 33.182] ABI class: X.Org Server Extension, version 5.0
[ 33.182] (II) Loading extension DRI2
[ 33.182] (II) LoadModule: "fglrx"
[ 33.182] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 33.195] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 33.195] compiled for 1.4.99.906, module version = 8.84.5
[ 33.195] Module class: X.Org Video Driver
[ 33.195] (II) Loading sub module "fglrxdrm"
[ 33.195] (II) LoadModule: "fglrxdrm"
[ 33.195] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 33.196] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 33.196] compiled for 1.4.99.906, module version = 8.84.5
[ 33.196] (II) ATI Proprietary Linux Driver Version Identifier:8.84.5
[ 33.196] (II) ATI Proprietary Linux Driver Release Identifier: 8.841
[ 33.196] (II) ATI Proprietary Linux Driver Build Date: Apr 5 2011 21:43:54
[ 33.196] (++) using VT number 7
[ 33.197] (WW) Falling back to old probe method for fglrx
[ 33.200] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 33.200] (--) Chipset Supported AMD Graphics Processor (0x689E) found
[ 33.200] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 33.200] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 33.201] (II) AMD Video driver is signed
[ 33.201] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 33.201] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 33.201] (II) fglrx(0): pEnt->device->identifier=0x14f3790
[ 33.201] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 33.201] (II) Loading sub module "vgahw"
[ 33.201] (II) LoadModule: "vgahw"
[ 33.201] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 33.201] (II) Module vgahw: vendor="X.Org Foundation"
[ 33.201] compiled for 1.10.1, module version = 0.1.0
[ 33.201] ABI class: X.Org Video Driver, version 10.0
[ 33.201] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 33.201] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 33.201] (==) fglrx(0): Default visual is TrueColor
[ 33.201] (**) fglrx(0): Option "DPMS" "true"
[ 33.201] (==) fglrx(0): RGB weight 888
[ 33.201] (II) fglrx(0): Using 8 bits per RGB
[ 33.201] (==) fglrx(0): Buffer Tiling is ON
[ 33.201] (II) Loading sub module "fglrxdrm"
[ 33.201] (II) LoadModule: "fglrxdrm"
[ 33.201] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 33.201] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 33.201] compiled for 1.4.99.906, module version = 8.84.5
[ 33.203] ukiDynamicMajor: failed to open /proc/ati/major
[ 33.203] ukiDynamicMajor: failed to open /proc/ati/major
[ 33.203] (==) fglrx(0): NoAccel = NO
[ 33.203] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 33.203] (--) fglrx(0): Chipset: "ATI Radeon HD 5800 Series " (Chipset = 0x689e)
[ 33.203] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe177)
[ 33.203] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 33.203] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 33.203] (--) fglrx(0): MMIO registers at 0xfdec0000
[ 33.203] (--) fglrx(0): I/O port at 0x0000ce00
[ 33.203] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 33.205] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 33.205] (EE) fglrx(0): ACPI: DRM connection failed
[ 33.271] (II) Loading sub module "vbe"
[ 33.271] (II) LoadModule: "vbe"
[ 33.271] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 33.271] (II) Module vbe: vendor="X.Org Foundation"
[ 33.271] compiled for 1.10.1, module version = 1.1.0
[ 33.271] ABI class: X.Org Video Driver, version 10.0
[ 33.271] (II) fglrx(0): VESA BIOS detected
[ 33.271] (II) fglrx(0): VESA VBE Version 3.0
[ 33.271] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 33.271] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 33.271] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 33.271] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 33.271] (II) fglrx(0): VESA VBE OEM Product: CYPRESS
[ 33.271] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 33.293] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 33.293] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 33.293] (II) fglrx(0): PCIE card detected
[ 33.293] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 33.293] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 33.293] (EE) fglrx(0): ACPI: DRM connection failed
[ 33.293] (WW) fglrx(0): Hasn't establisted DRM connection
[ 33.293] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 33.293] (WW) fglrx(0): No DRM connection for driver fglrx.
[ 33.293] (II) fglrx(0): RandR 1.2 support is enabled!
[ 33.293] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 33.293] (==) fglrx(0): Center Mode is disabled
[ 33.293] (II) Loading sub module "fb"
[ 33.293] (II) LoadModule: "fb"
[ 33.294] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 33.294] (II) Module fb: vendor="X.Org Foundation"
[ 33.294] compiled for 1.10.1, module version = 1.0.0
[ 33.294] ABI class: X.Org ANSI C Emulation, version 0.4
[ 33.294] (II) Loading sub module "ddc"
[ 33.294] (II) LoadModule: "ddc"
[ 33.294] (II) Module "ddc" already built-in
[ 33.380] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 33.380] (II) fglrx(0): Output DFP2 has no monitor section
[ 33.380] (II) fglrx(0): Output DFP3 has no monitor section
[ 33.380] (II) fglrx(0): Output CRT1 has no monitor section
[ 33.380] (II) Loading sub module "ddc"
[ 33.380] (II) LoadModule: "ddc"
[ 33.381] (II) Module "ddc" already built-in
[ 33.381] (II) fglrx(0): Connected Display0: CRT1
[ 33.381] (II) fglrx(0): Display0 EDID data ---------------------------
[ 33.381] (II) fglrx(0): Manufacturer: ACI Model: 22a8 Serial#: 69939
[ 33.381] (II) fglrx(0): Year: 2008 Week: 48
[ 33.381] (II) fglrx(0): EDID Version: 1.3
[ 33.381] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 33.381] (II) fglrx(0): Sync: Separate
[ 33.381] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 33.381] (II) fglrx(0): Gamma: 2.20
[ 33.381] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 33.381] (II) fglrx(0): First detailed timing is preferred mode
[ 33.381] (II) fglrx(0): redX: 0.644 redY: 0.332 greenX: 0.286 greenY: 0.601
[ 33.381] (II) fglrx(0): blueX: 0.152 blueY: 0.076 whiteX: 0.312 whiteY: 0.328
[ 33.381] (II) fglrx(0): Supported established timings:
[ 33.381] (II) fglrx(0): 720x400@70Hz
[ 33.381] (II) fglrx(0): 640x480@60Hz
[ 33.381] (II) fglrx(0): 640x480@67Hz
[ 33.381] (II) fglrx(0): 640x480@72Hz
[ 33.381] (II) fglrx(0): 640x480@75Hz
[ 33.381] (II) fglrx(0): 800x600@56Hz
[ 33.381] (II) fglrx(0): 800x600@60Hz
[ 33.381] (II) fglrx(0): 800x600@72Hz
[ 33.381] (II) fglrx(0): 800x600@75Hz
[ 33.381] (II) fglrx(0): 832x624@75Hz
[ 33.381] (II) fglrx(0): 1024x768@60Hz
[ 33.381] (II) fglrx(0): 1024x768@70Hz
[ 33.381] (II) fglrx(0): 1024x768@75Hz
[ 33.381] (II) fglrx(0): 1280x1024@75Hz
[ 33.381] (II) fglrx(0): Manufacturer's mask: 0
[ 33.381] (II) fglrx(0): Supported standard timings:
[ 33.381] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 33.381] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 33.381] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 33.381] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 33.381] (II) fglrx(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 33.381] (II) fglrx(0): #5: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 33.381] (II) fglrx(0): Supported detailed timing:
[ 33.381] (II) fglrx(0): clock: 146.0 MHz Image Size: 473 x 296 mm
[ 33.381] (II) fglrx(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240 h_border: 0
[ 33.381] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 33.381] (II) fglrx(0): Serial No: 8BLMTF069939
[ 33.381] (II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 85 kHz, PixClock max 165 MHz
[ 33.381] (II) fglrx(0): Monitor name: ASUS VW221
[ 33.381] (II) fglrx(0): EDID (in hex):
[ 33.381] (II) fglrx(0): 00ffffffffffff000469a82233110100
[ 33.381] (II) fglrx(0): 30120103682f1e782ac720a455499927
[ 33.381] (II) fglrx(0): 135054bfef00714f814081809500b300
[ 33.381] (II) fglrx(0): 81000101010108399030621a274018b0
[ 33.381] (II) fglrx(0): 3640d9281100001c000000ff0038424c
[ 33.381] (II) fglrx(0): 4d54463036393933390a000000fd0037
[ 33.381] (II) fglrx(0): 4b1e5510000a202020202020000000fc
[ 33.381] (II) fglrx(0): 00415355532056573232310a20200056
[ 33.381] (II) fglrx(0): End of Display0 EDID data --------------------
[ 33.390] (II) fglrx(0): EDID for output DFP1
[ 33.390] (II) fglrx(0): EDID for output DFP2
[ 33.390] (II) fglrx(0): EDID for output DFP3
[ 33.390] (II) fglrx(0): EDID for output CRT1
[ 33.390] (II) fglrx(0): Manufacturer: ACI Model: 22a8 Serial#: 69939
[ 33.390] (II) fglrx(0): Year: 2008 Week: 48
[ 33.390] (II) fglrx(0): EDID Version: 1.3
[ 33.390] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 33.390] (II) fglrx(0): Sync: Separate
[ 33.390] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 33.390] (II) fglrx(0): Gamma: 2.20
[ 33.390] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 33.390] (II) fglrx(0): First detailed timing is preferred mode
[ 33.390] (II) fglrx(0): redX: 0.644 redY: 0.332 greenX: 0.286 greenY: 0.601
[ 33.390] (II) fglrx(0): blueX: 0.152 blueY: 0.076 whiteX: 0.312 whiteY: 0.328
[ 33.390] (II) fglrx(0): Supported established timings:
[ 33.390] (II) fglrx(0): 720x400@70Hz
[ 33.390] (II) fglrx(0): 640x480@60Hz
[ 33.390] (II) fglrx(0): 640x480@67Hz
[ 33.390] (II) fglrx(0): 640x480@72Hz
[ 33.390] (II) fglrx(0): 640x480@75Hz
[ 33.390] (II) fglrx(0): 800x600@56Hz
[ 33.390] (II) fglrx(0): 800x600@60Hz
[ 33.390] (II) fglrx(0): 800x600@72Hz
[ 33.390] (II) fglrx(0): 800x600@75Hz
[ 33.390] (II) fglrx(0): 832x624@75Hz
[ 33.390] (II) fglrx(0): 1024x768@60Hz
[ 33.390] (II) fglrx(0): 1024x768@70Hz
[ 33.390] (II) fglrx(0): 1024x768@75Hz
[ 33.390] (II) fglrx(0): 1280x1024@75Hz
[ 33.390] (II) fglrx(0): Manufacturer's mask: 0
[ 33.390] (II) fglrx(0): Supported standard timings:
[ 33.390] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 33.390] (II) fglrx(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 33.390] (II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 33.390] (II) fglrx(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 33.390] (II) fglrx(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 33.390] (II) fglrx(0): #5: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 33.390] (II) fglrx(0): Supported detailed timing:
[ 33.390] (II) fglrx(0): clock: 146.0 MHz Image Size: 473 x 296 mm
[ 33.390] (II) fglrx(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240 h_border: 0
[ 33.390] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 33.390] (II) fglrx(0): Serial No: 8BLMTF069939
[ 33.390] (II) fglrx(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 85 kHz, PixClock max 165 MHz
[ 33.390] (II) fglrx(0): Monitor name: ASUS VW221
[ 33.390] (II) fglrx(0): EDID (in hex):
[ 33.390] (II) fglrx(0): 00000000000000003a202325693a2068
[ 33.390] (II) fglrx(0): 73697a653a20256920207673697a6520
[ 33.390] (II) fglrx(0): 25692020726566726573683a20256920
[ 33.390] (II) fglrx(0): 207669643a2025690a00621a274018b0
[ 33.390] (II) fglrx(0): 3640d9281100001c4100000000000000
[ 33.390] (II) fglrx(0): 00000000000000003a20537570706f72
[ 33.390] (II) fglrx(0): 7465642064657461696c65642074696d
[ 33.390] (II) fglrx(0): 696e673a0a00003a0a00310a20200056
[ 33.390] (II) fglrx(0): Printing probed modes for output CRT1
[ 33.390] (II) fglrx(0): Modeline "1680x1050"x60.0 146.00 1680 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.2 kHz)
[ 33.390] (II) fglrx(0): Modeline "1400x1050"x60.0 146.00 1400 1960 2136 2240 1050 1053 1059 1089 -hsync +vsync (65.2 kHz)
[ 33.390] (II) fglrx(0): Modeline "1600x900"x60.0 146.00 1600 1960 2136 2240 900 1053 1059 1089 -hsync +vsync (65.2 kHz)
[ 33.390] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 33.390] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 33.390] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 33.390] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 33.390] (II) fglrx(0): Modeline "1280x800"x60.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 33.390] (II) fglrx(0): Modeline "1152x864"x60.0 146.00 1152 1960 2136 2240 864 1053 1059 1089 -hsync +vsync (65.2 kHz)
[ 33.390] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 33.390] (II) fglrx(0): Modeline "1280x768"x60.0 83.50 1280 1352 1480 1680 768 803 809 831 -hsync +vsync (49.7 kHz)
[ 33.390] (II) fglrx(0): Modeline "1280x720"x60.0 83.50 1280 1352 1480 1680 720 803 809 831 -hsync +vsync (49.7 kHz)
[ 33.390] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 33.390] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 33.390] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 33.390] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 33.390] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 33.390] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 33.390] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 33.390] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 33.390] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz)
[ 33.390] (II) fglrx(0): Modeline "640x480"x67.0 27.28 640 664 728 816 480 481 484 499 -hsync +vsync (33.4 kHz)
[ 33.390] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 33.390] (II) fglrx(0): Output DFP1 disconnected
[ 33.390] (II) fglrx(0): Output DFP2 disconnected
[ 33.390] (II) fglrx(0): Output DFP3 disconnected
[ 33.390] (II) fglrx(0): Output CRT1 connected
[ 33.390] (II) fglrx(0): Using exact sizes for initial modes
[ 33.390] (II) fglrx(0): Output CRT1 using initial mode 1680x1050
[ 33.390] (II) fglrx(0): DPI set to (96, 96)
[ 33.390] (II) fglrx(0): Eyefinity capable adapter detected.
[ 33.390] (II) fglrx(0): Adapter ATI Radeon HD 5800 Series has 3 configurable heads and 1 displays connected.
[ 33.390] (==) fglrx(0): PseudoColor visuals disabled
[ 33.390] (II) Loading sub module "ramdac"
[ 33.390] (II) LoadModule: "ramdac"
[ 33.390] (II) Module "ramdac" already built-in
[ 33.390] (==) fglrx(0): NoDRI = NO
[ 33.390] (==) fglrx(0): Capabilities: 0x00000000
[ 33.390] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 33.390] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 33.391] (==) fglrx(0): UseFastTLS=0
[ 33.391] (==) fglrx(0): BlockSignalsOnLock=1
[ 33.391] (--) Depth 24 pixmap format is 32 bpp
[ 33.391] (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
[ 33.391] (WW) fglrx(0): ***********************************************************
[ 33.391] (WW) fglrx(0): * DRI initialization failed *
[ 33.391] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
[ 33.391] (WW) fglrx(0): * 2D and 3D acceleration disabled *
[ 33.391] (WW) fglrx(0): ***********************************************************
[ 33.391] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
[ 33.426] (II) fglrx(0): FBMM initialized for area (0,0)-(1728,8191)
[ 33.426] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1680) (front color buffer - assumption)
[ 33.426] (II) fglrx(0): Largest offscreen area available: 1728 x 6511
[ 33.426] (==) fglrx(0): Backing store disabled
[ 33.426] (II) Loading extension FGLRXEXTENSION
[ 33.426] (**) fglrx(0): DPMS enabled
[ 33.427] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 33.427] (WW) fglrx(0): Textured Video not supported without DRI enabled.
[ 33.427] (II) LoadModule: "glesx"
[ 33.427] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 33.427] (II) Module glesx: vendor="X.Org Foundation"
[ 33.427] compiled for 1.4.99.906, module version = 1.0.0
[ 33.427] (II) Loading extension GLESX
[ 33.427] (II) fglrx(0): GLESX enableFlags = 576
[ 33.428] (II) LoadModule: "amdxmm"
[ 33.428] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 33.428] (II) Module amdxmm: vendor="X.Org Foundation"
[ 33.428] compiled for 1.4.99.906, module version = 2.0.0
[ 33.428] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0):
[ 33.428] (EE) fglrx(0): XMM failed to initialize
[ 33.428] (WW) fglrx(0): No XV video playback available
[ 33.428] (II) fglrx(0): Enable composite support successfully
[ 33.428] (WW) fglrx(0): Option "VendorName" is not used
[ 33.428] (WW) fglrx(0): Option "ModelName" is not used
[ 33.428] (==) fglrx(0): Silken mouse enabled
[ 33.428] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 33.428] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 33.494] (--) RandR disabled
[ 33.494] (II) Initializing built-in extension Generic Event Extension
[ 33.494] (II) Initializing built-in extension SHAPE
[ 33.494] (II) Initializing built-in extension MIT-SHM
[ 33.494] (II) Initializing built-in extension XInputExtension
[ 33.494] (II) Initializing built-in extension XTEST
[ 33.494] (II) Initializing built-in extension BIG-REQUESTS
[ 33.494] (II) Initializing built-in extension SYNC
[ 33.494] (II) Initializing built-in extension XKEYBOARD
[ 33.494] (II) Initializing built-in extension XC-MISC
[ 33.494] (II) Initializing built-in extension SECURITY
[ 33.494] (II) Initializing built-in extension XINERAMA
[ 33.494] (II) Initializing built-in extension XFIXES
[ 33.494] (II) Initializing built-in extension RENDER
[ 33.494] (II) Initializing built-in extension RANDR
[ 33.494] (II) Initializing built-in extension COMPOSITE
[ 33.494] (II) Initializing built-in extension DAMAGE
[ 33.496]
Backtrace:
[ 33.496] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f598]
[ 33.496] 1: /usr/bin/X (0x400000+0x603b9) [0x4603b9]
[ 33.496] 2: /lib/libpthread.so.0 (0x7f6db8b4b000+0xf750) [0x7f6db8b5a750]
[ 33.496] 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs110_swlDriOpenConnection+0x3a) [0x7f6db575f8ea]
[ 33.496] 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (swlDriOpenConnection+0xd) [0x7f6db565520d]
[ 33.496] 5: /usr/lib/xorg/modules/extensions/fglrx/libglx.so (0x7f6db69ca000+0x1be84) [0x7f6db69e5e84]
[ 33.496] 6: /usr/lib/xorg/modules/extensions/fglrx/libglx.so (0x7f6db69ca000+0x1e185) [0x7f6db69e8185]
[ 33.496] 7: /usr/bin/X (InitExtensions+0x91) [0x4848d1]
[ 33.496] 8: /usr/bin/X (0x400000+0x21253) [0x421253]
[ 33.496] 9: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f6db7ad1f6d]
[ 33.496] 10: /usr/bin/X (0x400000+0x20f99) [0x420f99]
[ 33.496] Segmentation fault at address 0xa0
[ 33.496]
Fatal server error:
[ 33.496] Caught signal 11 (Segmentation fault). Server aborting
[ 33.496]
[ 33.496]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 33.496] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 33.496]
[ 33.623] (EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
Thanks again. I dont mind doing a fresh install. But I am worried I will get the same error anyway about cannot open display.
Cheers
EDIT:
Just to add CPU is Q6600 with arch 64bit.
Last edited by voorhees1979 (2011-05-04 10:04:15)
Offline
Can you post your xorg.conf contents, specifically the ATI device section?
Offline
Hi
Well I ended up doing a fresh install. Wanted to do it anyway really. But still the exact same problem anyway. My xorg after a fresh install. All i installed was gnome stuff/xorg and the catalyst-utils from AUR.
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Thanks
Offline
Try removing your xorg.conf
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
then
sudo rm /etc/X11/xorg.conf
Without an xorg, your system *should* use KMS to boot
Offline
Hi
Thanks for helping. OK I did a reformat and started from scratch. With some messing about I got everything up and going but I still have an issue with the graphics. The Kmenu and the other menus in the corners of the screen is corrupt, everything else is fine.
Bottom left, bottom right and top right.
The card is OK its brand new from overclockers and runs 100% on Win 7 gaming. I am unsure whatelse to do to fix the corrupt graphics. They are the only things that are corrupt everything else works great.
Many Thanks
Offline
Pages: 1