You are not logged in.
Hi friends,
I just installed Arch newest release on hp-laptop and for some reason my system-config-printer program will not load. This is first time I ever
had this problem . I would appreciate any ideas or help. Been using arch about year and a half and been searching threads for answers.
Thanks a lot
GS
Mod note: fixed title
Last edited by WorMzy (2017-01-19 16:23:02)
Offline
Can you use the cups web interface to configure your printer?
Offline
Launch it from a terminal and post whatever messages are dumped to the terminal.
Offline
Thanks x33a. Did that and showed me libgnome keyring was missing. downloaded it and b&w brother works. Will setup color later today.
Have a great day
GS
Please mark solved
Last edited by Gunslinger13 (2017-01-19 12:05:33)
Offline
Please edit your first post and amend your topic title to show that it is solved.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
please don't remove entire title just add [solved] at the beginning
Arch is home!
https://github.com/Docbroke
Offline
Yes, amend, not replace. I've fixed the title for you, but please read [url]https://wiki.archlinux.org/index.php/Code_of_conduct[[/url], in particular, the section titled How To Post explains marking your thread as solved.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline