You are not logged in.
- Topics: Active | Unanswered
#1 2019-05-20 10:41:06
- saturnteam
- Member
- Registered: 2019-05-20
- Posts: 7
[SOLVED] Disconnected displays after recent update
Hi! I've googled for hours, but still can't start gui on displays
Xorg.0.log
[ 1546.586] (--) Log file renamed from "/var/log/Xorg.pid-1835.log" to "/var/log/Xorg.0.log"
[ 1546.586]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 1546.586] Build Operating System: Linux Arch Linux
[ 1546.586] Current Operating System: Linux archlinux 5.1.3-arch1-1-ARCH #1 SMP PREEMPT Thu May 16 20:59:36 UTC 2019 x86_64
[ 1546.586] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=49d5cc49-ef4c-4220-8cf5-a44e5b087523 rw cryptdevice=UUID=3c329fd2-802f-4661-be14-67238b6d71f7:cr root=/dev/mapper/cr quiet
[ 1546.586] Build Date: 27 February 2019 04:04:00PM
[ 1546.587]
[ 1546.587] Current version of pixman: 0.38.4
[ 1546.587] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1546.587] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1546.587] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 20 13:01:49 2019
[ 1546.587] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1546.587] (==) No Layout section. Using the first Screen section.
[ 1546.587] (==) No screen section available. Using defaults.
[ 1546.587] (**) |-->Screen "Default Screen Section" (0)
[ 1546.587] (**) | |-->Monitor "<default monitor>"
[ 1546.587] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1546.587] (==) Automatically adding devices
[ 1546.587] (==) Automatically enabling devices
[ 1546.587] (==) Automatically adding GPU devices
[ 1546.587] (==) Automatically binding GPU devices
[ 1546.587] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1546.587] (WW) The directory "/usr/share/fonts/misc" does not exist.
[ 1546.587] Entry deleted from font path.
[ 1546.587] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 1546.587] Entry deleted from font path.
[ 1546.587] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[ 1546.587] Entry deleted from font path.
[ 1546.587] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[ 1546.587] Entry deleted from font path.
[ 1546.587] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[ 1546.587] Entry deleted from font path.
[ 1546.587] (==) FontPath set to:
/usr/share/fonts/TTF
[ 1546.587] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1546.587] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1546.587] (II) Module ABI versions:
[ 1546.587] X.Org ANSI C Emulation: 0.4
[ 1546.587] X.Org Video Driver: 24.0
[ 1546.587] X.Org XInput driver : 24.1
[ 1546.587] X.Org Server Extension : 10.0
[ 1546.587] (++) using VT number 1
[ 1546.587] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 1546.588] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1546.589] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 1546.589] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 1546.589] (--) PCI: (0@0:2:0) 8086:3e9b:1043:1021 rev 0, Mem @ 0xe3000000/16777216, 0x40000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 1546.589] (--) PCI:*(1@0:0:0) 10de:1c8d:1043:180e rev 161, Mem @ 0xe4000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 1546.590] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1546.590] (II) LoadModule: "glx"
[ 1546.590] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1546.590] (II) Module glx: vendor="X.Org Foundation"
[ 1546.590] compiled for 1.20.4, module version = 1.0.0
[ 1546.590] ABI class: X.Org Server Extension, version 10.0
[ 1546.590] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 1546.590] loading driver: nvidia
[ 1546.590] (==) Matched nvidia as autoconfigured driver 0
[ 1546.590] (==) Matched nouveau as autoconfigured driver 1
[ 1546.590] (==) Matched nv as autoconfigured driver 2
[ 1546.590] (==) Matched modesetting as autoconfigured driver 3
[ 1546.591] (==) Matched fbdev as autoconfigured driver 4
[ 1546.591] (==) Matched vesa as autoconfigured driver 5
[ 1546.591] (==) Assigned the driver to the xf86ConfigLayout
[ 1546.591] (II) LoadModule: "nvidia"
[ 1546.591] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1546.591] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1546.591] compiled for 1.6.99.901, module version = 1.0.0
[ 1546.591] Module class: X.Org Video Driver
[ 1546.591] (II) LoadModule: "nouveau"
[ 1546.591] (WW) Warning, couldn't open module nouveau
[ 1546.591] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 1546.591] (II) LoadModule: "nv"
[ 1546.591] (WW) Warning, couldn't open module nv
[ 1546.591] (EE) Failed to load module "nv" (module does not exist, 0)
[ 1546.591] (II) LoadModule: "modesetting"
[ 1546.591] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1546.591] (II) Module modesetting: vendor="X.Org Foundation"
[ 1546.591] compiled for 1.20.4, module version = 1.20.4
[ 1546.591] Module class: X.Org Video Driver
[ 1546.591] ABI class: X.Org Video Driver, version 24.0
[ 1546.591] (II) LoadModule: "fbdev"
[ 1546.591] (WW) Warning, couldn't open module fbdev
[ 1546.591] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1546.591] (II) LoadModule: "vesa"
[ 1546.591] (WW) Warning, couldn't open module vesa
[ 1546.591] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1546.591] (II) NVIDIA dlloader X Driver 430.14 Tue May 7 20:03:40 CDT 2019
[ 1546.591] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1546.591] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1546.600] (II) Loading sub module "fb"
[ 1546.600] (II) LoadModule: "fb"
[ 1546.600] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1546.601] (II) Module fb: vendor="X.Org Foundation"
[ 1546.601] compiled for 1.20.4, module version = 1.0.0
[ 1546.601] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1546.601] (II) Loading sub module "wfb"
[ 1546.601] (II) LoadModule: "wfb"
[ 1546.601] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 1546.601] (II) Module wfb: vendor="X.Org Foundation"
[ 1546.601] compiled for 1.20.4, module version = 1.0.0
[ 1546.601] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1546.601] (II) Loading sub module "ramdac"
[ 1546.601] (II) LoadModule: "ramdac"
[ 1546.601] (II) Module "ramdac" already built-in
[ 1546.601] (WW) Falling back to old probe method for modesetting
[ 1546.601] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1546.601] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 1546.601] (==) NVIDIA(0): RGB weight 888
[ 1546.601] (==) NVIDIA(0): Default visual is TrueColor
[ 1546.601] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1546.601] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 1546.601] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[ 1546.601] (**) NVIDIA(0): Enabling 2D acceleration
[ 1546.601] (II) Loading sub module "glxserver_nvidia"
[ 1546.601] (II) LoadModule: "glxserver_nvidia"
[ 1546.601] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 1546.604] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 1546.604] compiled for 1.6.99.901, module version = 1.0.0
[ 1546.604] Module class: X.Org Server Extension
[ 1546.604] (II) NVIDIA GLX Module 430.14 Tue May 7 20:02:40 CDT 2019
[ 1546.826] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 1546.826] (--) NVIDIA(0): DFP-0
[ 1546.826] (--) NVIDIA(0): DFP-1
[ 1546.826] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 (GP107-A) at PCI:1:0:0 (GPU-0)
[ 1546.826] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 1546.826] (--) NVIDIA(0): VideoBIOS: 86.07.4c.00.48
[ 1546.826] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 1546.826] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 1546.826] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 1546.826] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 1546.826] (--) NVIDIA(GPU-0):
[ 1546.826] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 1546.826] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 1546.826] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 1546.826] (--) NVIDIA(GPU-0):
[ 1546.826] (==) NVIDIA(0):
[ 1546.826] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 1546.826] (==) NVIDIA(0): will be used as the requested mode.
[ 1546.826] (==) NVIDIA(0):
[ 1546.826] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[ 1546.826] (--) NVIDIA(0): AllowEmptyInitialConfiguration is enabled
[ 1546.826] (II) NVIDIA(0): Validated MetaModes:
[ 1546.826] (II) NVIDIA(0): "NULL"
[ 1546.826] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 1546.826] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 1546.826] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 1546.826] (II) UnloadModule: "modesetting"
[ 1546.826] (II) Unloading modesetting
[ 1546.827] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[ 1546.827] (II) NVIDIA: access.
[ 1546.829] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 1546.829] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 1546.829] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 1546.829] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 1546.829] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 1546.829] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 1546.829] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 1546.829] (II) NVIDIA(0): Config Options in the README.
[ 1546.846] (II) NVIDIA(0): Setting mode "NULL"
[ 1546.850] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 1546.850] (==) NVIDIA(0): Backing store enabled
[ 1546.850] (==) NVIDIA(0): Silken mouse disabled
[ 1546.850] (==) NVIDIA(0): DPMS enabled
[ 1546.850] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 1546.850] (II) Loading sub module "dri2"
[ 1546.850] (II) LoadModule: "dri2"
[ 1546.850] (II) Module "dri2" already built-in
[ 1546.850] (II) NVIDIA(0): [DRI2] Setup complete
[ 1546.850] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 1546.850] (II) Initializing extension Generic Event Extension
[ 1546.850] (II) Initializing extension SHAPE
[ 1546.850] (II) Initializing extension MIT-SHM
[ 1546.850] (II) Initializing extension XInputExtension
[ 1546.850] (II) Initializing extension XTEST
[ 1546.850] (II) Initializing extension BIG-REQUESTS
[ 1546.850] (II) Initializing extension SYNC
[ 1546.850] (II) Initializing extension XKEYBOARD
[ 1546.850] (II) Initializing extension XC-MISC
[ 1546.850] (II) Initializing extension SECURITY
[ 1546.851] (II) Initializing extension XFIXES
[ 1546.851] (II) Initializing extension RENDER
[ 1546.851] (II) Initializing extension RANDR
[ 1546.851] (II) Initializing extension COMPOSITE
[ 1546.851] (II) Initializing extension DAMAGE
[ 1546.851] (II) Initializing extension MIT-SCREEN-SAVER
[ 1546.851] (II) Initializing extension DOUBLE-BUFFER
[ 1546.851] (II) Initializing extension RECORD
[ 1546.851] (II) Initializing extension DPMS
[ 1546.851] (II) Initializing extension Present
[ 1546.851] (II) Initializing extension DRI3
[ 1546.851] (II) Initializing extension X-Resource
[ 1546.851] (II) Initializing extension XVideo
[ 1546.851] (II) Initializing extension XVideo-MotionCompensation
[ 1546.851] (II) Initializing extension GLX
[ 1546.851] (II) Initializing extension GLX
[ 1546.851] (II) Indirect GLX disabled.
[ 1546.851] (II) GLX: Another vendor is already registered for screen 0
[ 1546.851] (II) Initializing extension XFree86-VidModeExtension
[ 1546.851] (II) Initializing extension XFree86-DGA
[ 1546.851] (II) Initializing extension XFree86-DRI
[ 1546.851] (II) Initializing extension DRI2
[ 1546.852] (II) Initializing extension NV-GLX
[ 1546.852] (II) Initializing extension NV-CONTROL
[ 1546.872] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1546.872] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1546.872] (II) LoadModule: "libinput"
[ 1546.872] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 1546.873] (II) Module libinput: vendor="X.Org Foundation"
[ 1546.873] compiled for 1.20.3, module version = 0.28.2
[ 1546.873] Module class: X.Org XInput Driver
[ 1546.873] ABI class: X.Org XInput driver, version 24.1
[ 1546.873] (II) Using input driver 'libinput' for 'Power Button'
[ 1546.873] (**) Power Button: always reports core events
[ 1546.873] (**) Option "Device" "/dev/input/event3"
[ 1546.873] (**) Option "_source" "server/udev"
[ 1546.873] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 1546.873] (II) event3 - Power Button: device is a keyboard
[ 1546.873] (II) event3 - Power Button: device removed
[ 1546.889] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 1546.889] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1546.890] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 1546.890] (II) event3 - Power Button: device is a keyboard
[ 1546.890] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 1546.890] (II) No input driver specified, ignoring this device.
[ 1546.890] (II) This device may have been added with another device file.
[ 1546.890] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1546.890] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 1546.890] (II) Using input driver 'libinput' for 'Power Button'
[ 1546.890] (**) Power Button: always reports core events
[ 1546.890] (**) Option "Device" "/dev/input/event2"
[ 1546.890] (**) Option "_source" "server/udev"
[ 1546.891] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 1546.891] (II) event2 - Power Button: device is a keyboard
[ 1546.891] (II) event2 - Power Button: device removed
[ 1546.922] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 1546.922] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1546.923] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 1546.923] (II) event2 - Power Button: device is a keyboard
[ 1546.923] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 1546.923] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 1546.923] (II) Using input driver 'libinput' for 'Sleep Button'
[ 1546.923] (**) Sleep Button: always reports core events
[ 1546.923] (**) Option "Device" "/dev/input/event1"
[ 1546.923] (**) Option "_source" "server/udev"
[ 1546.924] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 1546.924] (II) event1 - Sleep Button: device is a keyboard
[ 1546.924] (II) event1 - Sleep Button: device removed
[ 1546.949] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 1546.949] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 1546.950] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 1546.950] (II) event1 - Sleep Button: device is a keyboard
[ 1546.951] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event5)
[ 1546.951] (**) ELAN Touchscreen: Applying InputClass "libinput tablet catchall"
[ 1546.951] (II) Using input driver 'libinput' for 'ELAN Touchscreen'
[ 1546.951] (**) ELAN Touchscreen: always reports core events
[ 1546.951] (**) Option "Device" "/dev/input/event5"
[ 1546.951] (**) Option "_source" "server/udev"
[ 1546.952] (II) event5 - ELAN Touchscreen: is tagged by udev as: Tablet
[ 1546.958] (II) event5 - ELAN Touchscreen: tablet 'ELAN Touchscreen' unknown to libwacom
[ 1546.958] (II) event5 - ELAN Touchscreen: device is a tablet
[ 1546.958] (II) event5 - ELAN Touchscreen: device removed
[ 1547.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input10/event5"
[ 1547.016] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TABLET, id 9)
[ 1547.017] (II) event5 - ELAN Touchscreen: is tagged by udev as: Tablet
[ 1547.024] (II) event5 - ELAN Touchscreen: tablet 'ELAN Touchscreen' unknown to libwacom
[ 1547.024] (II) event5 - ELAN Touchscreen: device is a tablet
[ 1547.024] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse0)
[ 1547.024] (II) No input driver specified, ignoring this device.
[ 1547.024] (II) This device may have been added with another device file.
[ 1547.024] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event6)
[ 1547.024] (**) ELAN Touchscreen: Applying InputClass "libinput touchscreen catchall"
[ 1547.024] (II) Using input driver 'libinput' for 'ELAN Touchscreen'
[ 1547.024] (**) ELAN Touchscreen: always reports core events
[ 1547.024] (**) Option "Device" "/dev/input/event6"
[ 1547.024] (**) Option "_source" "server/udev"
[ 1547.025] (II) event6 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[ 1547.025] (II) event6 - ELAN Touchscreen: device is a touch device
[ 1547.025] (II) event6 - ELAN Touchscreen: device removed
[ 1547.082] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input11/event6"
[ 1547.082] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 1547.082] (**) Option "AccelerationScheme" "none"
[ 1547.082] (**) ELAN Touchscreen: (accel) selected scheme none/0
[ 1547.082] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 1547.083] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 1547.084] (II) event6 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[ 1547.084] (II) event6 - ELAN Touchscreen: device is a touch device
[ 1547.085] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 1547.085] (II) No input driver specified, ignoring this device.
[ 1547.085] (II) This device may have been added with another device file.
[ 1547.086] (II) config/udev: Adding input device FiiO DigiHug USB Audio (/dev/input/event7)
[ 1547.086] (**) FiiO DigiHug USB Audio: Applying InputClass "libinput keyboard catchall"
[ 1547.086] (II) Using input driver 'libinput' for 'FiiO DigiHug USB Audio'
[ 1547.086] (**) FiiO DigiHug USB Audio: always reports core events
[ 1547.086] (**) Option "Device" "/dev/input/event7"
[ 1547.086] (**) Option "_source" "server/udev"
[ 1547.088] (II) event7 - FiiO DigiHug USB Audio: is tagged by udev as: Keyboard
[ 1547.088] (II) event7 - FiiO DigiHug USB Audio: device is a keyboard
[ 1547.088] (II) event7 - FiiO DigiHug USB Audio: device removed
[ 1547.162] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.2/1-13.2.2:1.0/0003:1852:7022.0002/input/input15/event7"
[ 1547.162] (II) XINPUT: Adding extended input device "FiiO DigiHug USB Audio" (type: KEYBOARD, id 11)
[ 1547.167] (II) event7 - FiiO DigiHug USB Audio: is tagged by udev as: Keyboard
[ 1547.167] (II) event7 - FiiO DigiHug USB Audio: device is a keyboard
[ 1547.169] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard (/dev/input/event8)
[ 1547.169] (**) Corsair Corsair STRAFE RGB Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 1547.169] (II) Using input driver 'libinput' for 'Corsair Corsair STRAFE RGB Gaming Keyboard'
[ 1547.169] (**) Corsair Corsair STRAFE RGB Gaming Keyboard: always reports core events
[ 1547.169] (**) Option "Device" "/dev/input/event8"
[ 1547.169] (**) Option "_source" "server/udev"
[ 1547.173] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: is tagged by udev as: Keyboard
[ 1547.173] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: device is a keyboard
[ 1547.173] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: device removed
[ 1547.202] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.3/1-13.2.3:1.0/0003:1B1C:1B20.0003/input/input16/event8"
[ 1547.203] (II) XINPUT: Adding extended input device "Corsair Corsair STRAFE RGB Gaming Keyboard" (type: KEYBOARD, id 12)
[ 1547.207] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: is tagged by udev as: Keyboard
[ 1547.207] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: device is a keyboard
[ 1547.209] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard (/dev/input/event9)
[ 1547.209] (**) Corsair Corsair STRAFE RGB Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 1547.209] (II) Using input driver 'libinput' for 'Corsair Corsair STRAFE RGB Gaming Keyboard'
[ 1547.209] (**) Corsair Corsair STRAFE RGB Gaming Keyboard: always reports core events
[ 1547.209] (**) Option "Device" "/dev/input/event9"
[ 1547.209] (**) Option "_source" "server/udev"
[ 1547.213] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: is tagged by udev as: Keyboard
[ 1547.213] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: device is a keyboard
[ 1547.214] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: device removed
[ 1547.242] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.3/1-13.2.3:1.1/0003:1B1C:1B20.0004/input/input17/event9"
[ 1547.242] (II) XINPUT: Adding extended input device "Corsair Corsair STRAFE RGB Gaming Keyboard" (type: KEYBOARD, id 13)
[ 1547.247] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: is tagged by udev as: Keyboard
[ 1547.247] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: device is a keyboard
[ 1547.249] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control (/dev/input/event10)
[ 1547.249] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 1547.249] (II) Using input driver 'libinput' for 'Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control'
[ 1547.249] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: always reports core events
[ 1547.249] (**) Option "Device" "/dev/input/event10"
[ 1547.249] (**) Option "_source" "server/udev"
[ 1547.253] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 1547.253] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: device is a keyboard
[ 1547.254] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: device removed
[ 1547.282] (II) libinput: Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: needs a virtual subdevice
[ 1547.282] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.3/1-13.2.3:1.1/0003:1B1C:1B20.0004/input/input18/event10"
[ 1547.283] (II) XINPUT: Adding extended input device "Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control" (type: MOUSE, id 14)
[ 1547.283] (**) Option "AccelerationScheme" "none"
[ 1547.283] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: (accel) selected scheme none/0
[ 1547.283] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 1547.283] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 1547.287] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 1547.287] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: device is a keyboard
[ 1547.289] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard (/dev/input/event11)
[ 1547.289] (II) No input driver specified, ignoring this device.
[ 1547.289] (II) This device may have been added with another device file.
[ 1547.291] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard (/dev/input/event12)
[ 1547.291] (II) No input driver specified, ignoring this device.
[ 1547.291] (II) This device may have been added with another device file.
[ 1547.293] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event13)
[ 1547.293] (**) COMPANY USB Device: Applying InputClass "libinput pointer catchall"
[ 1547.293] (II) Using input driver 'libinput' for 'COMPANY USB Device'
[ 1547.293] (**) COMPANY USB Device: always reports core events
[ 1547.293] (**) Option "Device" "/dev/input/event13"
[ 1547.293] (**) Option "_source" "server/udev"
[ 1547.352] (II) event13 - COMPANY USB Device: is tagged by udev as: Mouse
[ 1547.353] (II) event13 - COMPANY USB Device: device is a pointer
[ 1547.353] (II) event13 - COMPANY USB Device: device removed
[ 1547.416] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.4/1-13.2.4:1.0/0003:09DA:FC7C.0005/input/input21/event13"
[ 1547.416] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: MOUSE, id 15)
[ 1547.416] (**) Option "AccelerationScheme" "none"
[ 1547.416] (**) COMPANY USB Device: (accel) selected scheme none/0
[ 1547.416] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[ 1547.416] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[ 1547.476] (II) event13 - COMPANY USB Device: is tagged by udev as: Mouse
[ 1547.476] (II) event13 - COMPANY USB Device: device is a pointer
[ 1547.478] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/mouse2)
[ 1547.478] (II) No input driver specified, ignoring this device.
[ 1547.478] (II) This device may have been added with another device file.
[ 1547.479] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam: USB2.0 V (/dev/input/event16)
[ 1547.479] (**) USB2.0 VGA UVC WebCam: USB2.0 V: Applying InputClass "libinput keyboard catchall"
[ 1547.479] (II) Using input driver 'libinput' for 'USB2.0 VGA UVC WebCam: USB2.0 V'
[ 1547.479] (**) USB2.0 VGA UVC WebCam: USB2.0 V: always reports core events
[ 1547.479] (**) Option "Device" "/dev/input/event16"
[ 1547.479] (**) Option "_source" "server/udev"
[ 1547.482] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[ 1547.482] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[ 1547.482] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: device removed
[ 1547.562] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input26/event16"
[ 1547.562] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam: USB2.0 V" (type: KEYBOARD, id 16)
[ 1547.566] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[ 1547.566] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[ 1547.567] (II) config/udev: Adding input device GDX1505:00 27C6:01F1 Touchpad (/dev/input/event15)
[ 1547.567] (**) GDX1505:00 27C6:01F1 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 1547.567] (II) Using input driver 'libinput' for 'GDX1505:00 27C6:01F1 Touchpad'
[ 1547.567] (**) GDX1505:00 27C6:01F1 Touchpad: always reports core events
[ 1547.567] (**) Option "Device" "/dev/input/event15"
[ 1547.568] (**) Option "_source" "server/udev"
[ 1547.679] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: is tagged by udev as: Touchpad
[ 1547.686] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: device is a touchpad
[ 1547.686] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: device removed
[ 1547.749] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-GDX1505:00/0018:27C6:01F1.0007/input/input24/event15"
[ 1547.749] (II) XINPUT: Adding extended input device "GDX1505:00 27C6:01F1 Touchpad" (type: TOUCHPAD, id 17)
[ 1547.751] (**) Option "AccelerationScheme" "none"
[ 1547.751] (**) GDX1505:00 27C6:01F1 Touchpad: (accel) selected scheme none/0
[ 1547.751] (**) GDX1505:00 27C6:01F1 Touchpad: (accel) acceleration factor: 2.000
[ 1547.751] (**) GDX1505:00 27C6:01F1 Touchpad: (accel) acceleration threshold: 4
[ 1547.753] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: is tagged by udev as: Touchpad
[ 1547.763] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: device is a touchpad
[ 1547.764] (II) config/udev: Adding input device GDX1505:00 27C6:01F1 Touchpad (/dev/input/mouse3)
[ 1547.764] (II) No input driver specified, ignoring this device.
[ 1547.764] (II) This device may have been added with another device file.
[ 1547.764] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event18)
[ 1547.764] (II) No input driver specified, ignoring this device.
[ 1547.764] (II) This device may have been added with another device file.
[ 1547.765] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event17)
[ 1547.765] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 1547.765] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 1547.765] (**) Asus WMI hotkeys: always reports core events
[ 1547.765] (**) Option "Device" "/dev/input/event17"
[ 1547.765] (**) Option "_source" "server/udev"
[ 1547.766] (II) event17 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 1547.766] (II) event17 - Asus WMI hotkeys: device is a keyboard
[ 1547.766] (II) event17 - Asus WMI hotkeys: device removed
[ 1547.829] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input27/event17"
[ 1547.829] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 18)
[ 1547.832] (II) event17 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 1547.832] (II) event17 - Asus WMI hotkeys: device is a keyboard
[ 1547.833] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 1547.833] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 1547.833] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 1547.833] (**) AT Translated Set 2 keyboard: always reports core events
[ 1547.833] (**) Option "Device" "/dev/input/event4"
[ 1547.833] (**) Option "_source" "server/udev"
[ 1547.835] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 1547.835] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 1547.838] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 1547.882] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 1547.882] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 19)
[ 1547.885] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 1547.885] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 1547.888] (II) config/udev: Adding input device PC Speaker (/dev/input/event14)
[ 1547.888] (II) No input driver specified, ignoring this device.
[ 1547.888] (II) This device may have been added with another device file.
[ 1547.890] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 1547.890] (II) Using input driver 'libinput' for 'Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control'
[ 1547.890] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: always reports core events
[ 1547.890] (**) Option "Device" "/dev/input/event10"
[ 1547.890] (**) Option "_source" "_driver/libinput"
[ 1547.890] (II) libinput: Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: is a virtual subdevice
[ 1547.890] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.3/1-13.2.3:1.1/0003:1B1C:1B20.0004/input/input18/event10"
[ 1547.890] (II) XINPUT: Adding extended input device "Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control" (type: KEYBOARD, id 20)
[ 1547.891] (EE) Failed to open authorization file "/var/run/sddm/{faf6700a-1242-48de-b98d-683fc4611caf}": No such file or directory
[ 1548.874] (II) event3 - Power Button: device removed
[ 1548.909] (II) event2 - Power Button: device removed
[ 1548.936] (II) event1 - Sleep Button: device removed
[ 1548.959] (II) event5 - ELAN Touchscreen: device removed
[ 1549.016] (II) event6 - ELAN Touchscreen: device removed
[ 1549.082] (II) event7 - FiiO DigiHug USB Audio: device removed
[ 1549.136] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: device removed
[ 1549.163] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: device removed
[ 1549.189] (II) event13 - COMPANY USB Device: device removed
[ 1549.242] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: device removed
[ 1549.296] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: device removed
[ 1549.349] (II) event17 - Asus WMI hotkeys: device removed
[ 1549.402] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 1549.429] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: device removed
noIf I downgrade xorg server to 1.19 version, there is no error
1547.891] (EE) Failed to open authorization file "/var/run/sddm/{faf6700a-1242-48de-b98d-683fc4611caf}": No such file or directoryBut all displays are still disconnected
Nvidia Optimus
I've configured xorg.conf using archliux documentation, and this configuration was working while I've updated today.
What is wrong?
Last edited by saturnteam (2019-05-20 15:17:55)
Offline
#2 2019-05-20 10:46:15
- saturnteam
- Member
- Registered: 2019-05-20
- Posts: 7
Re: [SOLVED] Disconnected displays after recent update
lshw
*-display
description: 3D controller
product: GP107M [GeForce GTX 1050 Mobile]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:163 memory:e4000000-e4ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:3000(size=128) memory:e5000000-e507ffff
*-display UNCLAIMED
description: VGA compatible controller
product: UHD Graphics 630 (Mobile)
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm vga_controller bus_master cap_list
configuration: latency=0
resources: memory:e3000000-e3ffffff memory:40000000-4fffffff ioport:4000(size=64) memory:c0000-dffffXorg
Section "Module"
Load "modesetting"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "1:0:0"
# Option "AllowEmptyInitialConfiguration"
EndSectionXsetup
#!/bin/sh
# Xsetup - run as root before the login dialog appears
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --autoI have the same problem using lightdm and sddm
Offline
#3 2019-05-20 12:21:11
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,163
Re: [SOLVED] Disconnected displays after recent update
The intel chip isn't used at all.
Please post a complete dmesg output, also "xrandr --listproviders" (you can export "DISPLAY=:0" to run that from a console login, but the X11 server must be running)
Online
#4 2019-05-20 12:34:42
- saturnteam
- Member
- Registered: 2019-05-20
- Posts: 7
Re: [SOLVED] Disconnected displays after recent update
seth wrote:
The intel chip isn't used at all.
Please post a complete dmesg output, also "xrandr --listproviders" (you can export "DISPLAY=:0" to run that from a console login, but the X11 server must be running)
I can't start x
[ 0.000000] Linux version 5.1.3-arch1-1-ARCH (builduser@heftig-19477) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Thu May 16 20:59:36 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=49d5cc49-ef4c-4220-8cf5-a44e5b087523 rw cryptdevice=UUID=3c329fd2-802f-4661-be14-67238b6d71f7:cr root=/dev/mapper/cr quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000038959fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003895a000-0x000000003a1bbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003a1bc000-0x000000003a238fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003a239000-0x000000003a350fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003a351000-0x000000003ab0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000003ab0f000-0x000000003ac0dfff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000003ac0e000-0x000000003ac0efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003ac0f000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004bdffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.60 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x3a1d5000 ACPI=0x3a1d5000 SMBIOS=0x3a9c7000 SMBIOS 3.0=0x3a9c6000 ESRT=0x35852f98
[ 0.000000] SMBIOS 3.1.1 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. ZenBook Pro 15 UX550GDX_UX580GD/UX550GDX, BIOS UX550GDX.302 10/09/2018
[ 0.000000] tsc: Detected 2200.000 MHz processor
[ 0.000534] tsc: Detected 2208.000 MHz TSC
[ 0.000534] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000535] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000540] last_pfn = 0x4be000 max_arch_pfn = 0x400000000
[ 0.000550] MTRR default type: uncachable
[ 0.000551] MTRR fixed ranges enabled:
[ 0.000552] 00000-9FFFF write-back
[ 0.000552] A0000-BFFFF uncachable
[ 0.000553] C0000-FFFFF write-back
[ 0.000553] MTRR variable ranges enabled:
[ 0.000554] 0 base 0040000000 mask 7FF0000000 write-combining
[ 0.000555] 1 base 0000000000 mask 7FC0000000 write-back
[ 0.000555] 2 base 003B800000 mask 7FFF800000 uncachable
[ 0.000556] 3 base 003C000000 mask 7FFC000000 uncachable
[ 0.000556] 4 base 0100000000 mask 7F00000000 write-back
[ 0.000557] 5 base 0200000000 mask 7E00000000 write-back
[ 0.000557] 6 base 04C0000000 mask 7FC0000000 uncachable
[ 0.000558] 7 base 0400000000 mask 7F00000000 write-back
[ 0.000558] 8 disabled
[ 0.000558] 9 disabled
[ 0.001458] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001653] last_pfn = 0x3ac0f max_arch_pfn = 0x400000000
[ 0.014708] esrt: Reserving ESRT space from 0x0000000035852f98 to 0x0000000035852fd0.
[ 0.014715] check: Scanning 1 areas for low memory corruption
[ 0.014718] Using GB pages for direct mapping
[ 0.014719] BRK [0x225001000, 0x225001fff] PGTABLE
[ 0.014720] BRK [0x225002000, 0x225002fff] PGTABLE
[ 0.014721] BRK [0x225003000, 0x225003fff] PGTABLE
[ 0.014737] BRK [0x225004000, 0x225004fff] PGTABLE
[ 0.014738] BRK [0x225005000, 0x225005fff] PGTABLE
[ 0.014801] BRK [0x225006000, 0x225006fff] PGTABLE
[ 0.014817] BRK [0x225007000, 0x225007fff] PGTABLE
[ 0.014848] Secure boot could not be determined
[ 0.014848] RAMDISK: [mem 0x3077e000-0x326acfff]
[ 0.014860] ACPI: Early table checksum verification disabled
[ 0.014862] ACPI: RSDP 0x000000003A1D5000 000024 (v02 _ASUS_)
[ 0.014864] ACPI: XSDT 0x000000003A1D50C0 0000FC (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.014867] ACPI: FACP 0x000000003A2184E0 000114 (v06 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.014870] ACPI: DSDT 0x000000003A1D5248 043297 (v02 _ASUS_ Notebook 01072009 INTL 20160527)
[ 0.014872] ACPI: FACS 0x000000003A34E080 000040
[ 0.014873] ACPI: APIC 0x000000003A2185F8 0000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.014875] ACPI: FPDT 0x000000003A2186F0 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.014876] ACPI: FIDT 0x000000003A218738 00009C (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.014878] ACPI: MCFG 0x000000003A2187D8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.014879] ACPI: ECDT 0x000000003A218818 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.014881] ACPI: SSDT 0x000000003A2188E0 000334 (v01 SataRe SataTabl 00001000 INTL 20160527)
[ 0.014882] ACPI: SSDT 0x000000003A218C18 0052A9 (v02 DptfTa DptfTabl 00001000 INTL 20160527)
[ 0.014884] ACPI: SSDT 0x000000003A21DEC8 0017D5 (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
[ 0.014886] ACPI: MSDM 0x000000003A21F6A0 000055 (v03 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.014887] ACPI: SSDT 0x000000003A21F6F8 00012C (v01 Intel_ UsbCTabl 00001000 INTL 20160527)
[ 0.014889] ACPI: SSDT 0x000000003A21F828 0031C7 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
[ 0.014890] ACPI: SSDT 0x000000003A2229F0 001FEA (v02 PegSsd PegSsdt 00001000 INTL 20160527)
[ 0.014892] ACPI: HPET 0x000000003A2249E0 000038 (v01 INTEL Notebook 00000002 01000013)
[ 0.014893] ACPI: UEFI 0x000000003A224A18 000048 (v01 _ASUS_ Notebook 00000002 01000013)
[ 0.014895] ACPI: LPIT 0x000000003A224A60 00005C (v01 INTEL Notebook 00000002 01000013)
[ 0.014896] ACPI: SSDT 0x000000003A224AC0 0027DE (v02 INTEL PtidDevc 00001000 INTL 20160527)
[ 0.014897] ACPI: SSDT 0x000000003A2272A0 000FFE (v02 INTEL TbtTypeC 00000000 INTL 20160527)
[ 0.014899] ACPI: DBGP 0x000000003A2282A0 000034 (v01 _ASUS_ Notebook 00000002 01000013)
[ 0.014900] ACPI: DBG2 0x000000003A2282D8 000054 (v00 _ASUS_ Notebook 00000002 01000013)
[ 0.014902] ACPI: SSDT 0x000000003A228330 0000AE (v02 SgRef SgPeg 00001000 INTL 20160527)
[ 0.014903] ACPI: DMAR 0x000000003A2283E0 0000A8 (v01 INTEL EDK2 00000002 01000013)
[ 0.014905] ACPI: NHLT 0x000000003A228488 00002D (v00 INTEL EDK2 00000002 01000013)
[ 0.014906] ACPI: BGRT 0x000000003A2284B8 000038 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.014908] ACPI: TPM2 0x000000003A2284F0 000034 (v04 _ASUS_ Notebook 00000001 AMI 00000000)
[ 0.014909] ACPI: SSDT 0x000000003A228528 002059 (v01 OptRef OptTabl 00001000 INTL 20160527)
[ 0.014911] ACPI: WSMT 0x000000003A22A588 000028 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.014915] ACPI: Local APIC address 0xfee00000
[ 0.015260] No NUMA configuration found
[ 0.015261] Faking a node at [mem 0x0000000000000000-0x00000004bdffffff]
[ 0.015263] NODE_DATA(0) allocated [mem 0x4bdffc000-0x4bdffffff]
[ 0.015279] Zone ranges:
[ 0.015279] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.015280] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.015281] Normal [mem 0x0000000100000000-0x00000004bdffffff]
[ 0.015281] Device empty
[ 0.015282] Movable zone start for each node
[ 0.015282] Early memory node ranges
[ 0.015283] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.015283] node 0: [mem 0x0000000000100000-0x0000000038959fff]
[ 0.015284] node 0: [mem 0x000000003ac0e000-0x000000003ac0efff]
[ 0.015284] node 0: [mem 0x0000000100000000-0x00000004bdffffff]
[ 0.015571] Zeroed struct page in unavailable ranges: 30471 pages
[ 0.015572] Initmem setup node 0 [mem 0x0000000000001000-0x00000004bdffffff]
[ 0.015572] On node 0 totalpages: 4155641
[ 0.015573] DMA zone: 64 pages used for memmap
[ 0.015574] DMA zone: 23 pages reserved
[ 0.015574] DMA zone: 3998 pages, LIFO batch:0
[ 0.015629] DMA32 zone: 3558 pages used for memmap
[ 0.015630] DMA32 zone: 227675 pages, LIFO batch:63
[ 0.020288] Normal zone: 61312 pages used for memmap
[ 0.020289] Normal zone: 3923968 pages, LIFO batch:63
[ 0.074348] Reserving Intel graphics memory at [mem 0x3c000000-0x3fffffff]
[ 0.075449] ACPI: PM-Timer IO Port: 0x1808
[ 0.075450] ACPI: Local APIC address 0xfee00000
[ 0.075455] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.075455] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.075455] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.075456] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.075456] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.075457] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.075457] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.075457] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.075458] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.075458] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.075458] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.075459] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.075517] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.075519] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.075519] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.075520] ACPI: IRQ0 used by override.
[ 0.075521] ACPI: IRQ9 used by override.
[ 0.075522] Using ACPI (MADT) for SMP configuration information
[ 0.075523] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.075528] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[ 0.075537] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.075538] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.075539] PM: Registered nosave memory: [mem 0x3895a000-0x3a1bbfff]
[ 0.075539] PM: Registered nosave memory: [mem 0x3a1bc000-0x3a238fff]
[ 0.075539] PM: Registered nosave memory: [mem 0x3a239000-0x3a350fff]
[ 0.075540] PM: Registered nosave memory: [mem 0x3a351000-0x3ab0efff]
[ 0.075540] PM: Registered nosave memory: [mem 0x3ab0f000-0x3ac0dfff]
[ 0.075541] PM: Registered nosave memory: [mem 0x3ac0f000-0x3fffffff]
[ 0.075541] PM: Registered nosave memory: [mem 0x40000000-0xefffffff]
[ 0.075542] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.075542] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.075542] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.075543] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.075543] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.075543] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.075544] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.075544] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
[ 0.075544] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.075545] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.075545] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.075546] [mem 0x40000000-0xefffffff] available for PCI devices
[ 0.075547] Booting paravirtualized kernel on bare hardware
[ 0.075549] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.145820] random: get_random_bytes called from start_kernel+0x96/0x538 with crng_init=0
[ 0.145823] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:12 nr_node_ids:1
[ 0.146022] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144
[ 0.146026] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.146026] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.146038] Built 1 zonelists, mobility grouping on. Total pages: 4090684
[ 0.146039] Policy zone: Normal
[ 0.146040] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=49d5cc49-ef4c-4220-8cf5-a44e5b087523 rw cryptdevice=UUID=3c329fd2-802f-4661-be14-67238b6d71f7:cr root=/dev/mapper/cr quiet
[ 0.148510] Calgary: detecting Calgary via BIOS EBDA area
[ 0.148511] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.174858] Memory: 16132556K/16622564K available (12291K kernel code, 1317K rwdata, 3768K rodata, 1564K init, 3740K bss, 490008K reserved, 0K cma-reserved)
[ 0.174962] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.174966] Kernel/User page tables isolation: enabled
[ 0.174976] ftrace: allocating 37076 entries in 145 pages
[ 0.184485] rcu: Preemptible hierarchical RCU implementation.
[ 0.184485] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.184486] rcu: RCU dyntick-idle grace-period acceleration is enabled.
[ 0.184486] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[ 0.184487] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.184487] Tasks RCU enabled.
[ 0.184488] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.184488] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.185530] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[ 0.185739] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.185991] Console: colour dummy device 80x25
[ 0.185994] printk: console [tty0] enabled
[ 0.186006] ACPI: Core revision 20190215
[ 0.186452] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.186523] hpet clockevent registered
[ 0.186596] APIC: Switch to symmetric I/O mode setup
[ 0.186597] DMAR: Host address width 39
[ 0.186598] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.186602] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[ 0.186602] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.186605] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.186605] DMAR: RMRR base: 0x0000003915e000 end: 0x0000003917dfff
[ 0.186606] DMAR: RMRR base: 0x0000003b800000 end: 0x0000003fffffff
[ 0.186607] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.186607] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.186608] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.189688] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.189689] x2apic enabled
[ 0.189720] Switched APIC routing to cluster x2apic.
[ 0.199077] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.213216] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
[ 0.213224] Calibrating delay loop (skipped), value calculated using timer frequency.. 4417.00 BogoMIPS (lpj=7360000)
[ 0.213226] pid_max: default: 32768 minimum: 301
[ 0.215805] LSM: Security Framework initializing
[ 0.215807] Yama: becoming mindful.
[ 0.217240] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.217955] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.217982] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.218009] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.218103] *** VALIDATE proc ***
[ 0.218139] *** VALIDATE cgroup1 ***
[ 0.218140] *** VALIDATE cgroup2 ***
[ 0.218161] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.218161] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.218164] mce: CPU supports 12 MCE banks
[ 0.218171] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.218187] process: using mwait in idle threads
[ 0.218188] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.218189] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.218190] Spectre V2 : Mitigation: Full generic retpoline
[ 0.218190] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.218191] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.218194] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.218195] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.218195] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.218213] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.218376] Freeing SMP alternatives memory: 32K
[ 0.219949] TSC deadline timer enabled
[ 0.219959] smpboot: CPU0: Intel(R) Core(TM) i7-8750H CPU @ 2.20GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.239904] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.239994] ... version: 4
[ 0.239996] ... bit width: 48
[ 0.239997] ... generic registers: 4
[ 0.240000] ... value mask: 0000ffffffffffff
[ 0.240001] ... max period: 00007fffffffffff
[ 0.240003] ... fixed-purpose events: 3
[ 0.240004] ... event mask: 000000070000000f
[ 0.246559] rcu: Hierarchical SRCU implementation.
[ 0.270297] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.276575] smp: Bringing up secondary CPUs ...
[ 0.316583] x86: Booting SMP configuration:
[ 0.316586] .... node #0, CPUs: #1 #2 #3 #4 #5 #6
[ 0.517184] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.556584] #7 #8 #9 #10 #11
[ 0.717109] smp: Brought up 1 node, 12 CPUs
[ 0.717109] smpboot: Max logical packages: 1
[ 0.717109] smpboot: Total of 12 processors activated (53013.00 BogoMIPS)
[ 0.720218] devtmpfs: initialized
[ 0.720218] x86/mm: Memory block size: 128MB
[ 0.720581] PM: Registering ACPI NVS region [mem 0x3a239000-0x3a350fff] (1146880 bytes)
[ 0.720581] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.720581] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.720581] pinctrl core: initialized pinctrl subsystem
[ 0.720581] PM: RTC time: 12:29:17, date: 2019-05-20
[ 0.720581] NET: Registered protocol family 16
[ 0.720581] audit: initializing netlink subsys (disabled)
[ 0.720581] audit: type=2000 audit(1558355357.536:1): state=initialized audit_enabled=0 res=1
[ 0.723242] cpuidle: using governor ladder
[ 0.723256] cpuidle: using governor menu
[ 0.723256] ACPI: bus type PCI registered
[ 0.723256] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.723343] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.723345] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.723355] PCI: Using configuration type 1 for base access
[ 0.724629] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.724629] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.724629] ACPI: Added _OSI(Module Device)
[ 0.724629] ACPI: Added _OSI(Processor Device)
[ 0.724629] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.724629] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.724629] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.724629] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.724629] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.781797] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.783375] ACPI: EC: EC started
[ 0.783376] ACPI: EC: interrupt blocked
[ 0.785169] ACPI: \: Used as first EC
[ 0.785170] ACPI: \: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.785171] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.795023] ACPI: Dynamic OEM Table Load:
[ 0.795027] ACPI: SSDT 0xFFFFA1D16B28E800 0005BE (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
[ 0.795488] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.796841] ACPI: Dynamic OEM Table Load:
[ 0.796844] ACPI: SSDT 0xFFFFA1D16A815400 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
[ 0.797242] ACPI: Dynamic OEM Table Load:
[ 0.797244] ACPI: SSDT 0xFFFFA1D16A80F400 00010A (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
[ 0.797588] ACPI: Dynamic OEM Table Load:
[ 0.797591] ACPI: SSDT 0xFFFFA1D16B28D800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
[ 0.798245] ACPI: Dynamic OEM Table Load:
[ 0.798249] ACPI: SSDT 0xFFFFA1D16A8A3000 000EF1 (v02 PmRef ApIst 00003000 INTL 20160527)
[ 0.799251] ACPI: Dynamic OEM Table Load:
[ 0.799254] ACPI: SSDT 0xFFFFA1D16A815000 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
[ 0.799666] ACPI: Dynamic OEM Table Load:
[ 0.799669] ACPI: SSDT 0xFFFFA1D16A814C00 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
[ 0.803563] ACPI: Interpreter enabled
[ 0.803593] ACPI: (supports S0 S3 S4 S5)
[ 0.803593] ACPI: Using IOAPIC for interrupt routing
[ 0.803622] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.804709] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.806949] ACPI: Power Resource [PG00] (on)
[ 0.840837] ACPI: Power Resource [USBC] (on)
[ 0.844670] ACPI: Power Resource [V0PR] (on)
[ 0.844879] ACPI: Power Resource [V1PR] (on)
[ 0.845078] ACPI: Power Resource [V2PR] (on)
[ 0.850269] ACPI: Power Resource [WRST] (on)
[ 0.855699] ACPI: Power Resource [PIN] (off)
[ 0.856052] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.856056] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.861651] acpi PNP0A08:00: _OSC: platform does not support [AER]
[ 0.864880] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR]
[ 0.865846] PCI host bridge to bus 0000:00
[ 0.865847] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.865848] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.865848] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.865849] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.865849] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.865850] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.865850] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.865851] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.865852] pci_bus 0000:00: root bus resource [mem 0x40000000-0xefffffff window]
[ 0.865852] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[ 0.865853] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.865857] pci 0000:00:00.0: [8086:3ec4] type 00 class 0x060000
[ 0.866170] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.866204] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.866418] pci 0000:00:02.0: [8086:3e9b] type 00 class 0x030000
[ 0.866425] pci 0000:00:02.0: reg 0x10: [mem 0xe3000000-0xe3ffffff 64bit]
[ 0.866429] pci 0000:00:02.0: reg 0x18: [mem 0x40000000-0x4fffffff 64bit pref]
[ 0.866431] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.866442] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.866557] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.866564] pci 0000:00:04.0: reg 0x10: [mem 0xe5310000-0xe5317fff 64bit]
[ 0.866730] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.866738] pci 0000:00:08.0: reg 0x10: [mem 0xe532b000-0xe532bfff 64bit]
[ 0.866948] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.866996] pci 0000:00:12.0: reg 0x10: [mem 0xe532a000-0xe532afff 64bit]
[ 0.867348] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.867395] pci 0000:00:14.0: reg 0x10: [mem 0xe5300000-0xe530ffff 64bit]
[ 0.867544] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.867729] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.867768] pci 0000:00:14.2: reg 0x10: [mem 0xe5320000-0xe5321fff 64bit]
[ 0.867789] pci 0000:00:14.2: reg 0x18: [mem 0xe5329000-0xe5329fff 64bit]
[ 0.868043] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
[ 0.868220] pci 0000:00:14.3: reg 0x10: [mem 0xe531c000-0xe531ffff 64bit]
[ 0.868820] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.869096] pci 0000:00:14.5: [8086:a375] type 00 class 0x080501
[ 0.869150] pci 0000:00:14.5: reg 0x10: [mem 0xe5328000-0xe5328fff 64bit]
[ 0.869723] pci 0000:00:15.0: [8086:a368] type 00 class 0x0c8000
[ 0.870420] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.873134] pci 0000:00:15.1: [8086:a369] type 00 class 0x0c8000
[ 0.873830] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.876354] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.876398] pci 0000:00:16.0: reg 0x10: [mem 0xe5325000-0xe5325fff 64bit]
[ 0.876528] pci 0000:00:16.0: PME# supported from D3hot
[ 0.876833] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
[ 0.877103] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.877344] pci 0000:00:1b.4: [8086:a32c] type 01 class 0x060400
[ 0.877618] pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold
[ 0.877659] pci 0000:00:1b.4: PTM enabled (root), 4dns granularity
[ 0.877881] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
[ 0.878102] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.878135] pci 0000:00:1d.0: PTM enabled (root), 4dns granularity
[ 0.878635] pci 0000:00:1e.0: [8086:a328] type 00 class 0x078000
[ 0.879362] pci 0000:00:1e.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.882065] pci 0000:00:1e.2: [8086:a32a] type 00 class 0x0c8000
[ 0.882793] pci 0000:00:1e.2: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[ 0.885268] pci 0000:00:1f.0: [8086:a30d] type 00 class 0x060100
[ 0.885685] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040380
[ 0.885773] pci 0000:00:1f.3: reg 0x10: [mem 0xe5318000-0xe531bfff 64bit]
[ 0.885873] pci 0000:00:1f.3: reg 0x20: [mem 0xe5100000-0xe51fffff 64bit]
[ 0.886036] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.886322] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.886495] pci 0000:00:1f.4: reg 0x10: [mem 0xe5322000-0xe53220ff 64bit]
[ 0.886700] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.887067] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.887096] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.887328] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200
[ 0.887339] pci 0000:01:00.0: reg 0x10: [mem 0xe4000000-0xe4ffffff]
[ 0.887345] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.887351] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.887355] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.887359] pci 0000:01:00.0: reg 0x30: [mem 0xe5000000-0xe507ffff pref]
[ 0.887404] pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.887475] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.887477] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.887478] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
[ 0.887480] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.887651] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 0.887827] pci 0000:00:1b.4: PCI bridge to [bus 03-6d]
[ 0.887837] pci 0000:00:1b.4: bridge window [mem 0xb4000000-0xe20fffff]
[ 0.887845] pci 0000:00:1b.4: bridge window [mem 0x50000000-0x99ffffff 64bit pref]
[ 0.888176] pci 0000:6e:00.0: [144d:a808] type 00 class 0x010802
[ 0.888231] pci 0000:6e:00.0: reg 0x10: [mem 0xe5200000-0xe5203fff 64bit]
[ 0.888633] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.888643] pci 0000:00:1d.0: bridge window [mem 0xe5200000-0xe52fffff]
[ 0.890499] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 0.890528] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 0.890555] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 0.890582] ACPI: PCI Interrupt Link [LNKD] (IRQs) *0
[ 0.890609] ACPI: PCI Interrupt Link [LNKE] (IRQs) *0
[ 0.890636] ACPI: PCI Interrupt Link [LNKF] (IRQs) *0
[ 0.890663] ACPI: PCI Interrupt Link [LNKG] (IRQs) *0
[ 0.890690] ACPI: PCI Interrupt Link [LNKH] (IRQs) *0
[ 0.891107] ACPI: EC: interrupt unblocked
[ 0.891107] ACPI: EC: event unblocked
[ 0.891107] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x27, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.891107] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.891107] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.891107] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.891107] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.891107] vgaarb: loaded
[ 0.891107] ACPI: bus type USB registered
[ 0.891107] usbcore: registered new interface driver usbfs
[ 0.891107] usbcore: registered new interface driver hub
[ 0.891108] usbcore: registered new device driver usb
[ 0.891108] pps_core: LinuxPPS API ver. 1 registered
[ 0.891108] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.891108] PTP clock support registered
[ 0.891108] EDAC MC: Ver: 3.0.0
[ 0.891108] Registered efivars operations
[ 0.910151] PCI: Using ACPI for IRQ routing
[ 0.921270] PCI: pci_cache_line_size set to 64 bytes
[ 0.922014] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.922015] e820: reserve RAM buffer [mem 0x3895a000-0x3bffffff]
[ 0.922015] e820: reserve RAM buffer [mem 0x3ac0f000-0x3bffffff]
[ 0.922016] e820: reserve RAM buffer [mem 0x4be000000-0x4bfffffff]
[ 0.922067] NetLabel: Initializing
[ 0.922068] NetLabel: domain hash size = 128
[ 0.922068] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.922075] NetLabel: unlabeled traffic allowed by default
[ 0.923341] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.923343] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.926551] clocksource: Switched to clocksource tsc-early
[ 0.933118] VFS: Disk quotas dquot_6.6.0
[ 0.933129] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.933141] *** VALIDATE hugetlbfs ***
[ 0.933170] pnp: PnP ACPI init
[ 0.933337] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.933338] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.933341] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.933353] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.933430] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.933432] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.933557] pnp 00:03: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.933705] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.933706] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.933706] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.933707] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.933708] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.933708] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.933709] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.933710] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.933712] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.933892] system 00:05: [io 0x1800-0x18fe] could not be reserved
[ 0.933893] system 00:05: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.933893] system 00:05: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.933894] system 00:05: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.933895] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.933895] system 00:05: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.933896] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.933898] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.934139] system 00:06: [io 0x2000-0x20fe] has been reserved
[ 0.934141] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.935010] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.935621] pnp: PnP ACPI: found 8 devices
[ 0.940843] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.940847] pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.940848] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.940849] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.940850] pci 0000:00:1b.4: bridge window [io 0x1000-0x0fff] to [bus 03-6d] add_size 1000
[ 0.940855] pci 0000:00:1b.0: BAR 14: assigned [mem 0x9a000000-0x9a1fffff]
[ 0.940859] pci 0000:00:1b.0: BAR 15: assigned [mem 0x9a200000-0x9a3fffff 64bit pref]
[ 0.940862] pci 0000:00:15.0: BAR 0: assigned [mem 0x9a400000-0x9a400fff 64bit]
[ 0.941137] pci 0000:00:15.1: BAR 0: assigned [mem 0x9a401000-0x9a401fff 64bit]
[ 0.941404] pci 0000:00:1b.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.941405] pci 0000:00:1b.4: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.941407] pci 0000:00:1e.0: BAR 0: assigned [mem 0x9a402000-0x9a402fff 64bit]
[ 0.941675] pci 0000:00:1e.2: BAR 0: assigned [mem 0x9a403000-0x9a403fff 64bit]
[ 0.941942] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.941943] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.941945] pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe50fffff]
[ 0.941946] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.941949] pci 0000:00:1b.0: PCI bridge to [bus 02]
[ 0.941959] pci 0000:00:1b.0: bridge window [io 0x5000-0x5fff]
[ 0.941966] pci 0000:00:1b.0: bridge window [mem 0x9a000000-0x9a1fffff]
[ 0.941971] pci 0000:00:1b.0: bridge window [mem 0x9a200000-0x9a3fffff 64bit pref]
[ 0.941981] pci 0000:00:1b.4: PCI bridge to [bus 03-6d]
[ 0.941983] pci 0000:00:1b.4: bridge window [io 0x6000-0x6fff]
[ 0.941990] pci 0000:00:1b.4: bridge window [mem 0xb4000000-0xe20fffff]
[ 0.941995] pci 0000:00:1b.4: bridge window [mem 0x50000000-0x99ffffff 64bit pref]
[ 0.942005] pci 0000:00:1d.0: PCI bridge to [bus 6e]
[ 0.942014] pci 0000:00:1d.0: bridge window [mem 0xe5200000-0xe52fffff]
[ 0.942028] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.942029] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.942029] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.942030] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000e3fff window]
[ 0.942031] pci_bus 0000:00: resource 8 [mem 0x000e4000-0x000e7fff window]
[ 0.942031] pci_bus 0000:00: resource 9 [mem 0x000e8000-0x000ebfff window]
[ 0.942032] pci_bus 0000:00: resource 10 [mem 0x000ec000-0x000effff window]
[ 0.942032] pci_bus 0000:00: resource 11 [mem 0x000f0000-0x000fffff window]
[ 0.942033] pci_bus 0000:00: resource 12 [mem 0x40000000-0xefffffff window]
[ 0.942033] pci_bus 0000:00: resource 13 [mem 0xfc800000-0xfe7fffff window]
[ 0.942034] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.942035] pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe50fffff]
[ 0.942035] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.942036] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.942037] pci_bus 0000:02: resource 1 [mem 0x9a000000-0x9a1fffff]
[ 0.942037] pci_bus 0000:02: resource 2 [mem 0x9a200000-0x9a3fffff 64bit pref]
[ 0.942038] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.942038] pci_bus 0000:03: resource 1 [mem 0xb4000000-0xe20fffff]
[ 0.942039] pci_bus 0000:03: resource 2 [mem 0x50000000-0x99ffffff 64bit pref]
[ 0.942039] pci_bus 0000:6e: resource 1 [mem 0xe5200000-0xe52fffff]
[ 0.942171] NET: Registered protocol family 2
[ 0.942255] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.942287] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.942389] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.942458] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.942488] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.942513] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.942560] NET: Registered protocol family 1
[ 0.942562] NET: Registered protocol family 44
[ 0.942569] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.942983] PCI: CLS 64 bytes, default 64
[ 0.943002] Unpacking initramfs...
[ 1.249929] Freeing initrd memory: 31932K
[ 1.276681] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.276683] software IO TLB: mapped [mem 0x2c77e000-0x3077e000] (64MB)
[ 1.276723] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b81b95f, max_idle_ns: 440795257325 ns
[ 1.276745] clocksource: Switched to clocksource tsc
[ 1.276944] check: Scanning for low memory corruption every 60 seconds
[ 1.277603] Initialise system trusted keyrings
[ 1.277613] Key type blacklist registered
[ 1.277663] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[ 1.278898] zbud: loaded
[ 1.312996] Key type asymmetric registered
[ 1.312997] Asymmetric key parser 'x509' registered
[ 1.313003] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.313033] io scheduler mq-deadline registered
[ 1.313034] io scheduler kyber registered
[ 1.313064] io scheduler bfq registered
[ 1.317233] pcieport 0000:00:01.0: Signaling PME with IRQ 122
[ 1.317359] pcieport 0000:00:1b.0: Signaling PME with IRQ 123
[ 1.317392] pciehp 0000:00:1b.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.317723] pcieport 0000:00:1b.4: Signaling PME with IRQ 124
[ 1.317751] pciehp 0000:00:1b.4:pcie004: Slot #24 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 1.318046] pcieport 0000:00:1d.0: Signaling PME with IRQ 125
[ 1.318157] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.318210] efifb: probing for efifb
[ 1.318218] efifb: showing boot graphics
[ 1.320115] efifb: framebuffer at 0x40000000, using 32448k, total 32448k
[ 1.320116] efifb: mode is 3840x2160x32, linelength=15360, pages=1
[ 1.320116] efifb: scrolling: redraw
[ 1.320117] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.320138] fbcon: Deferring console take-over
[ 1.320139] fb0: EFI VGA frame buffer device
[ 1.320143] intel_idle: MWAIT substates: 0x11142120
[ 1.320144] intel_idle: v0.4.1 model 0x9E
[ 1.320575] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.320623] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C09:01/PNP0C0D:00/input/input0
[ 1.320627] ACPI: Lid Switch [LID]
[ 1.320678] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.320682] ACPI: Sleep Button [SLPB]
[ 1.320696] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.320699] ACPI: Power Button [PWRB]
[ 1.320715] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.323240] ACPI: Power Button [PWRF]
[ 1.325218] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.325219] ACPI: Thermal Zone [THRM] (73 C)
[ 1.325440] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.327433] nvme nvme0: pci function 0000:6e:00.0
[ 1.327453] usbcore: registered new interface driver usbserial_generic
[ 1.327455] usbserial: USB Serial support registered for generic
[ 1.327501] rtc_cmos 00:01: RTC can wake from S4
[ 1.329003] rtc_cmos 00:01: registered as rtc0
[ 1.329011] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.329059] intel_pstate: Intel P-state driver initializing
[ 1.329068] intel_pstate: Disabling energy efficiency optimization
[ 1.329987] intel_pstate: HWP enabled
[ 1.330497] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.330525] intel_pmc_core: initialized
[ 1.330700] NET: Registered protocol family 10
[ 1.336429] Segment Routing with IPv6
[ 1.336441] NET: Registered protocol family 17
[ 1.337696] RAS: Correctable Errors collector initialized.
[ 1.337753] microcode: sig=0x906ea, pf=0x20, revision=0x96
[ 1.338231] microcode: Microcode Update Driver: v2.2.
[ 1.338245] sched_clock: Marking stable (1340983310, -2756078)->(1346457109, -8229877)
[ 1.339165] registered taskstats version 1
[ 1.339170] Loading compiled-in X.509 certificates
[ 1.341682] Loaded X.509 cert 'Build time autogenerated kernel key: 024a75663fe5b9f722b70dfdf9bf6ffd7e67323b'
[ 1.341698] zswap: loaded using pool lzo/zbud
[ 1.345956] Key type big_key registered
[ 1.347077] PM: Magic number: 3:694:481
[ 1.347467] rtc_cmos 00:01: setting system clock to 2019-05-20T12:29:18 UTC (1558355358)
[ 1.541777] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.607614] nvme nvme0: 12/0/0 default/read/poll queues
[ 1.626706] nvme0n1: p1 p2 p3 p4
[ 1.630814] Freeing unused decrypted memory: 2040K
[ 1.631444] Freeing unused kernel image memory: 1564K
[ 1.677017] Write protecting the kernel read-only data: 18432k
[ 1.678370] Freeing unused kernel image memory: 2016K
[ 1.678805] Freeing unused kernel image memory: 328K
[ 1.700278] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.700280] x86/mm: Checking user space page tables
[ 1.716827] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.716829] Run /init as init process
[ 1.781755] fbcon: Taking over console
[ 1.781803] Console: switching to colour frame buffer device 480x135
[ 1.828483] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 1.828522] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:03)
[ 1.829510] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 1.829510] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.831374] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.836016] cryptd: max_cpu_qlen set to 1000
[ 1.836274] sdhci: Secure Digital Host Controller Interface driver
[ 1.836275] sdhci: Copyright(c) Pierre Ossman
[ 1.837062] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.837066] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.838172] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x110 quirks 0x0000000000009810
[ 1.838181] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.838403] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[ 1.838404] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.838406] usb usb1: Product: xHCI Host Controller
[ 1.838407] usb usb1: Manufacturer: Linux 5.1.3-arch1-1-ARCH xhci-hcd
[ 1.838408] usb usb1: SerialNumber: 0000:00:14.0
[ 1.838865] sdhci-pci 0000:00:14.5: SDHCI controller found [8086:a375] (rev 10)
[ 1.838902] hub 1-0:1.0: USB hub found
[ 1.838924] hub 1-0:1.0: 16 ports detected
[ 1.842317] AVX2 version of gcm_enc/dec engaged.
[ 1.842318] AES CTR mode by8 optimization enabled
[ 1.844281] mmc0: SDHCI controller on PCI [0000:00:14.5] using ADMA
[ 1.845068] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.845070] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.845073] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.845104] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[ 1.845105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.845106] usb usb2: Product: xHCI Host Controller
[ 1.845107] usb usb2: Manufacturer: Linux 5.1.3-arch1-1-ARCH xhci-hcd
[ 1.845108] usb usb2: SerialNumber: 0000:00:14.0
[ 1.845168] hub 2-0:1.0: USB hub found
[ 1.845185] hub 2-0:1.0: 8 ports detected
[ 1.858054] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.946464] device-mapper: uevent: version 1.0.3
[ 1.946672] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[ 1.965051] random: cryptsetup: uninitialized urandom read (4 bytes read)
[ 1.975557] random: cryptsetup: uninitialized urandom read (4 bytes read)
[ 2.173673] usb 1-9: new high-speed USB device number 2 using xhci_hcd
[ 2.328620] usb 1-9: New USB device found, idVendor=13d3, idProduct=5755, bcdDevice=17.03
[ 2.328625] usb 1-9: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.328628] usb 1-9: Product: USB2.0 VGA UVC WebCam
[ 2.328630] usb 1-9: Manufacturer: AzureWave
[ 2.328632] usb 1-9: SerialNumber: 0001
[ 2.453557] usb 1-12: new full-speed USB device number 3 using xhci_hcd
[ 2.596857] usb 1-12: New USB device found, idVendor=04f3, idProduct=2706, bcdDevice=57.11
[ 2.596862] usb 1-12: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[ 2.596866] usb 1-12: Product: Touchscreen
[ 2.596869] usb 1-12: Manufacturer: ELAN
[ 2.606307] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.614621] usbcore: registered new interface driver usbhid
[ 2.614624] usbhid: USB HID core driver
[ 2.620299] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input5
[ 2.620356] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input6
[ 2.620405] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input7
[ 2.620448] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input8
[ 2.620875] hid-generic 0003:04F3:2706.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-12/input0
[ 2.627785] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input10
[ 2.627850] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input11
[ 2.628207] hid-multitouch 0003:04F3:2706.0001: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-12/input0
[ 2.720296] usb 1-14: new full-speed USB device number 4 using xhci_hcd
[ 2.861994] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[ 2.861999] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.197978] random: crng init done
[ 9.069214] mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069215] mce: CPU8: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069216] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069216] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069217] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069218] mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069219] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069219] mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069220] mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069221] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069255] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069255] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069256] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.069257] mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 1)
[ 9.070191] mce: CPU8: Core temperature/speed normal
[ 9.070191] mce: CPU9: Package temperature/speed normal
[ 9.070192] mce: CPU1: Package temperature/speed normal
[ 9.070192] mce: CPU4: Package temperature/speed normal
[ 9.070193] mce: CPU2: Core temperature/speed normal
[ 9.070193] mce: CPU3: Package temperature/speed normal
[ 9.070194] mce: CPU10: Package temperature/speed normal
[ 9.070194] mce: CPU7: Package temperature/speed normal
[ 9.070195] mce: CPU8: Package temperature/speed normal
[ 9.070195] mce: CPU2: Package temperature/speed normal
[ 9.070234] mce: CPU6: Package temperature/speed normal
[ 9.070235] mce: CPU0: Package temperature/speed normal
[ 9.070235] mce: CPU11: Package temperature/speed normal
[ 9.070236] mce: CPU5: Package temperature/speed normal
[ 10.545780] NET: Registered protocol family 38
[ 10.628543] device-mapper: crypt: xts(aes) using implementation "xts-aes-aesni"
[ 10.790919] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 10.896666] systemd[1]: systemd 242.29-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 10.913791] systemd[1]: Detected architecture x86-64.
[ 11.029497] systemd[1]: Listening on Journal Socket.
[ 11.033067] systemd[1]: Listening on Process Core Dump Socket.
[ 11.035227] systemd[1]: Created slice User and Session Slice.
[ 11.035270] systemd[1]: Listening on udev Kernel Socket.
[ 11.035293] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 11.035301] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 11.035306] systemd[1]: Reached target Slices.
[ 11.035808] systemd[1]: Mounting Huge Pages File System...
[ 11.041639] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 11.219329] audit: type=1130 audit(1558355368.366:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.224565] systemd-journald[522]: Received request to flush runtime journal from PID 1
[ 11.232990] systemd-journald[522]: File /var/log/journal/f8980fcd1d14454fafb1a595dd45d9ba/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 11.254330] audit: type=1130 audit(1558355368.403:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.297464] audit: type=1130 audit(1558355368.446:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.318286] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20190215/nsprepkg-96)
[ 11.341203] ACPI: AC Adapter [AC0] (on-line)
[ 11.389060] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 11.389961] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 11.390594] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 11.391940] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 11.394553] Linux agpgart interface v0.103
[ 11.395432] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 11.396933] media: Linux media interface: v0.10
[ 11.404245] input: PC Speaker as /devices/platform/pcspkr/input/input15
[ 11.404246] IPMI message handler: version 39.2
[ 11.408979] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 11.408980] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 11.408981] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 11.408981] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 11.408982] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 11.408982] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 11.409512] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 11.409586] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 11.411161] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 11.419188] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 11.419510] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 11.422874] i2c_hid i2c-GDX1505:00: i2c-GDX1505:00 supply vdd not found, using dummy regulator
[ 11.422883] i2c_hid i2c-GDX1505:00: i2c-GDX1505:00 supply vddl not found, using dummy regulator
[ 11.445261] mousedev: PS/2 mouse device common for all mice
[ 11.445754] iTCO_vendor_support: vendor-support=0
[ 11.447070] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.447286] iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
[ 11.447289] iTCO_wdt: probe of iTCO_wdt failed with error -16
[ 11.447369] input: GDX1505:00 27C6:01F1 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-GDX1505:00/0018:27C6:01F1.0002/input/input17
[ 11.447846] hid-multitouch 0018:27C6:01F1.0002: input,hidraw1: I2C HID v1.00 Mouse [GDX1505:00 27C6:01F1] on i2c-GDX1505:00
[ 11.450471] ipmi device interface
[ 11.451055] asus_wmi: ASUS WMI generic driver loaded
[ 11.451614] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 11.451935] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 11.452609] intel-lpss 0000:00:1e.2: enabling device (0000 -> 0002)
[ 11.452922] idma64 idma64.3: Found Intel integrated DMA 64-bit
[ 11.454653] asus_wmi: Initialization: 0x1
[ 11.454717] asus_wmi: BIOS WMI version: 9.0
[ 11.454761] asus_wmi: SFUN value: 0x21
[ 11.455216] videodev: Linux video capture interface: v2.00
[ 11.456243] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input19
[ 11.456385] asus_wmi: Number of fans: 0
[ 11.475483] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.478517] audit: type=1130 audit(1558355368.626:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@leds:asus::kbd_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.486840] audit: type=1130 audit(1558355368.636:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.490081] Bluetooth: Core ver 2.22
[ 11.490093] NET: Registered protocol family 31
[ 11.490094] Bluetooth: HCI device and connection manager initialized
[ 11.490097] Bluetooth: HCI socket layer initialized
[ 11.490099] Bluetooth: L2CAP socket layer initialized
[ 11.490102] Bluetooth: SCO socket layer initialized
[ 11.497518] uvcvideo: Found UVC 1.00 device USB2.0 VGA UVC WebCam (13d3:5755)
[ 11.501338] uvcvideo: Failed to initialize entity for entity 6
[ 11.501339] uvcvideo: Failed to register entities (-22).
[ 11.501403] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input20
[ 11.501463] usbcore: registered new interface driver uvcvideo
[ 11.501464] USB Video Class driver (1.1.1)
[ 11.511361] usbcore: registered new interface driver btusb
[ 11.511435] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.512087] Bluetooth: hci0: Bootloader revision 0.1 build 42 week 52 2015
[ 11.513092] Bluetooth: hci0: Device revision is 2
[ 11.513093] Bluetooth: hci0: Secure boot is enabled
[ 11.513093] Bluetooth: hci0: OTP lock is enabled
[ 11.513094] Bluetooth: hci0: API lock is enabled
[ 11.513094] Bluetooth: hci0: Debug lock is disabled
[ 11.513095] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 11.515232] Bluetooth: hci0: Found device firmware: intel/ibt-17-16-1.sfi
[ 11.537960] audit: type=1130 audit(1558355368.686:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.539760] Intel(R) Wireless WiFi driver for Linux
[ 11.539761] Copyright(c) 2003- 2015 Intel Corporation
[ 11.539829] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[ 11.566573] intel_rapl: Found RAPL domain package
[ 11.566575] intel_rapl: Found RAPL domain core
[ 11.566576] intel_rapl: Found RAPL domain uncore
[ 11.566577] intel_rapl: Found RAPL domain dram
[ 11.572244] audit: type=1130 audit(1558355368.719:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-56CF\x2d89D1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.573309] iwlwifi 0000:00:14.3: loaded firmware version 46.3cfab8da.0 op_mode iwlmvm
[ 11.586908] dw-apb-uart.2: ttyS0 at MMIO 0x9a402000 (irq = 20, base_baud = 7500000) is a 16550A
[ 11.610088] tps6598x: probe of i2c-INT3515-tps6598x.1 failed with error -22
[ 11.622743] audit: type=1130 audit(1558355368.769:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.627222] audit: type=1127 audit(1558355368.776:10): pid=723 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[ 11.629566] audit: type=1130 audit(1558355368.776:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 11.644426] nvidia: loading out-of-tree module taints kernel.
[ 11.644431] nvidia: module license 'NVIDIA' taints kernel.
[ 11.644431] Disabling lock debugging due to kernel taint
[ 11.647489] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318
[ 11.648171] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 11.656578] nvidia-nvlink: Nvlink Core is being initialized, major device number 236
[ 11.656876] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[ 11.702689] iwlwifi 0000:00:14.3: base HW address: fc:77:74:c7:fc:b8
[ 11.707403] 8021q: 802.1Q VLAN Support v1.8
[ 11.725235] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.725236] Bluetooth: BNEP filters: protocol multicast
[ 11.725238] Bluetooth: BNEP socket layer initialized
[ 11.757141] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 430.14 Wed May 8 01:10:53 UTC 2019
[ 11.764945] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 430.14 Tue May 7 19:58:01 CDT 2019
[ 11.766869] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 11.766871] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 11.774851] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 11.775078] thermal thermal_zone9: failed to read out thermal zone (-61)
[ 11.775966] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[ 12.236429] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190215/nsarguments-66)
[ 13.082405] Bluetooth: hci0: Waiting for firmware download to complete
[ 13.083414] Bluetooth: hci0: Firmware loaded in 1535226 usecs
[ 13.083444] Bluetooth: hci0: Waiting for device to boot
[ 13.096522] Bluetooth: hci0: Device booted in 12780 usecs
[ 13.096896] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-17-16-1.ddc
[ 13.103410] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 16.608024] kauditd_printk_skb: 20 callbacks suppressed
[ 16.608024] audit: type=1130 audit(1558355373.756:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 16.779163] audit: type=1131 audit(1558355373.926:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.352055] audit: type=1006 audit(1558355378.500:34): pid=823 uid=0 old-auid=4294967295 auid=0 tty=tty2 old-ses=4294967295 ses=2 res=1
[ 21.365464] audit: type=1130 audit(1558355378.513:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 21.370304] audit: type=1006 audit(1558355378.520:36): pid=826 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1
[ 21.397665] audit: type=1130 audit(1558355378.546:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'Offline
#5 2019-05-20 14:14:46
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,163
Re: [SOLVED] Disconnected displays after recent update
You posted an Xorg log? And leaving aside the sddm error (which you claimed gone) there's no further (fatal) error…
There's also no trace of the IGP in the dmesg, => "lsmod; lspci -v"?
Online
#6 2019-05-20 14:28:47
- saturnteam
- Member
- Registered: 2019-05-20
- Posts: 7
Re: [SOLVED] Disconnected displays after recent update
seth wrote:
You posted an Xorg log? And leaving aside the sddm error (which you claimed gone) there's no further (fatal) error…
There's also no trace of the IGP in the dmesg, => "lsmod; lspci -v"?
That was a dmesg output
Lsmod shows that Nvidia nvidia_drm nvidia_modest are loaded
Output of lsmod and lspci is too big
And here is xorg log with downgraded xorg server.
It seems like x starts in virtual screen
[ 385.464] (--) Log file renamed from "/var/log/Xorg.pid-1121.log" to "/var/log/Xorg.0.log"
[ 385.464]
X.Org X Server 1.19.4
Release Date: 2017-10-04
[ 385.464] X Protocol Version 11, Revision 0
[ 385.464] Build Operating System: Linux 4.12.12-1-ARCH x86_64
[ 385.464] Current Operating System: Linux archlinux 5.1.3-arch1-1-ARCH #1 SMP PREEMPT Thu May 16 20:59:36 UTC 2019 x86_64
[ 385.464] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=49d5cc49-ef4c-4220-8cf5-a44e5b087523 rw cryptdevice=UUID=3c329fd2-802f-4661-be14-67238b6d71f7:cr root=/dev/mapper/cr quiet
[ 385.464] Build Date: 05 October 2017 03:52:55AM
[ 385.464]
[ 385.464] Current version of pixman: 0.38.4
[ 385.464] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 385.464] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 385.464] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 20 17:27:17 2019
[ 385.464] (==) Using config file: "/etc/X11/xorg.conf"
[ 385.464] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 385.464] (==) No Layout section. Using the first Screen section.
[ 385.464] (==) No screen section available. Using defaults.
[ 385.464] (**) |-->Screen "Default Screen Section" (0)
[ 385.464] (**) | |-->Monitor "<default monitor>"
[ 385.464] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 385.464] (**) | |-->Device "nvidia"
[ 385.464] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 385.464] (==) Automatically adding devices
[ 385.464] (==) Automatically enabling devices
[ 385.464] (==) Automatically adding GPU devices
[ 385.464] (==) Automatically binding GPU devices
[ 385.464] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 385.464] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[ 385.464] Entry deleted from font path.
[ 385.464] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 385.464] Entry deleted from font path.
[ 385.464] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 385.464] Entry deleted from font path.
[ 385.464] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[ 385.464] Entry deleted from font path.
[ 385.464] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[ 385.464] Entry deleted from font path.
[ 385.464] (==) FontPath set to:
/usr/share/fonts/TTF/
[ 385.464] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 385.464] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 385.464] (II) Loader magic: 0x55fe609e6d60
[ 385.464] (II) Module ABI versions:
[ 385.464] X.Org ANSI C Emulation: 0.4
[ 385.464] X.Org Video Driver: 23.0
[ 385.464] X.Org XInput driver : 24.1
[ 385.464] X.Org Server Extension : 10.0
[ 385.465] (++) using VT number 1
[ 385.465] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 385.465] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 385.466] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[ 385.466] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[ 385.467] (--) PCI: (0:0:2:0) 8086:3e9b:1043:1021 rev 0, Mem @ 0xe3000000/16777216, 0x40000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[ 385.467] (--) PCI:*(0:1:0:0) 10de:1c8d:1043:180e rev 161, Mem @ 0xe4000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 385.467] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 385.467] (II) "glx" will be loaded by default.
[ 385.467] (II) LoadModule: "modesetting"
[ 385.467] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 385.467] (II) Module modesetting: vendor="X.Org Foundation"
[ 385.467] compiled for 1.19.4, module version = 1.19.4
[ 385.467] Module class: X.Org Video Driver
[ 385.467] ABI class: X.Org Video Driver, version 23.0
[ 385.467] (II) LoadModule: "glx"
[ 385.467] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 385.468] (II) Module glx: vendor="X.Org Foundation"
[ 385.468] compiled for 1.19.4, module version = 1.0.0
[ 385.468] ABI class: X.Org Server Extension, version 10.0
[ 385.468] (II) LoadModule: "nvidia"
[ 385.468] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 385.468] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 385.468] compiled for 1.6.99.901, module version = 1.0.0
[ 385.468] Module class: X.Org Video Driver
[ 385.468] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 385.468] (II) NVIDIA dlloader X Driver 430.14 Tue May 7 20:03:40 CDT 2019
[ 385.468] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 385.477] (WW) Falling back to old probe method for modesetting
[ 385.477] (II) Loading sub module "fb"
[ 385.477] (II) LoadModule: "fb"
[ 385.478] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 385.478] (II) Module fb: vendor="X.Org Foundation"
[ 385.478] compiled for 1.19.4, module version = 1.0.0
[ 385.478] ABI class: X.Org ANSI C Emulation, version 0.4
[ 385.478] (II) Loading sub module "wfb"
[ 385.478] (II) LoadModule: "wfb"
[ 385.478] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 385.478] (II) Module wfb: vendor="X.Org Foundation"
[ 385.478] compiled for 1.19.4, module version = 1.0.0
[ 385.478] ABI class: X.Org ANSI C Emulation, version 0.4
[ 385.478] (II) Loading sub module "ramdac"
[ 385.478] (II) LoadModule: "ramdac"
[ 385.478] (II) Module "ramdac" already built-in
[ 385.478] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 385.478] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 385.478] (==) NVIDIA(0): RGB weight 888
[ 385.478] (==) NVIDIA(0): Default visual is TrueColor
[ 385.478] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 385.478] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[ 385.478] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration" "Yes"
[ 385.479] (**) NVIDIA(0): Option "UseDisplayDevice" "DFP-0, DFP-1"
[ 385.479] (**) NVIDIA(0): Enabling 2D acceleration
[ 385.479] (II) Loading sub module "glxserver_nvidia"
[ 385.479] (II) LoadModule: "glxserver_nvidia"
[ 385.479] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 385.481] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 385.481] compiled for 1.6.99.901, module version = 1.0.0
[ 385.481] Module class: X.Org Server Extension
[ 385.481] (II) NVIDIA GLX Module 430.14 Tue May 7 20:02:40 CDT 2019
[ 385.702] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 385.702] (--) NVIDIA(0): DFP-0
[ 385.702] (--) NVIDIA(0): DFP-1
[ 385.703] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 1050 (GP107-A) at PCI:1:0:0 (GPU-0)
[ 385.703] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 385.703] (--) NVIDIA(0): VideoBIOS: 86.07.4c.00.48
[ 385.703] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 385.703] (--) NVIDIA(GPU-0): DFP-0: disconnected
[ 385.703] (--) NVIDIA(GPU-0): DFP-0: Internal TMDS
[ 385.703] (--) NVIDIA(GPU-0): DFP-0: 165.0 MHz maximum pixel clock
[ 385.703] (--) NVIDIA(GPU-0):
[ 385.703] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 385.703] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 385.703] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 385.703] (--) NVIDIA(GPU-0):
[ 385.703] (==) NVIDIA(0):
[ 385.703] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 385.703] (==) NVIDIA(0): will be used as the requested mode.
[ 385.703] (==) NVIDIA(0):
[ 385.703] (--) NVIDIA(0): No enabled display devices found; starting anyway because
[ 385.703] (--) NVIDIA(0): AllowEmptyInitialConfiguration is enabled
[ 385.703] (II) NVIDIA(0): Validated MetaModes:
[ 385.703] (II) NVIDIA(0): "NULL"
[ 385.703] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 385.703] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 385.703] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 385.703] (II) UnloadModule: "modesetting"
[ 385.703] (II) Unloading modesetting
[ 385.703] (--) Depth 24 pixmap format is 32 bpp
[ 385.703] (II) NVIDIA: Using 24576.00 MB of virtual memory for indirect memory
[ 385.703] (II) NVIDIA: access.
[ 385.706] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 385.706] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 385.706] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 385.706] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 385.706] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 385.706] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 385.706] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 385.706] (II) NVIDIA(0): Config Options in the README.
[ 385.722] (II) NVIDIA(0): Setting mode "NULL"
[ 385.725] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 385.725] (==) NVIDIA(0): Backing store enabled
[ 385.725] (==) NVIDIA(0): Silken mouse enabled
[ 385.725] (==) NVIDIA(0): DPMS enabled
[ 385.725] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[ 385.725] (II) Loading sub module "dri2"
[ 385.725] (II) LoadModule: "dri2"
[ 385.726] (II) Module "dri2" already built-in
[ 385.726] (II) NVIDIA(0): [DRI2] Setup complete
[ 385.726] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 385.726] (--) RandR disabled
[ 385.727] (II) Initializing extension GLX
[ 385.727] (II) Indirect GLX disabled.
[ 385.747] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 385.747] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 385.747] (II) LoadModule: "libinput"
[ 385.747] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 385.748] (II) Module libinput: vendor="X.Org Foundation"
[ 385.748] compiled for 1.20.3, module version = 0.28.2
[ 385.748] Module class: X.Org XInput Driver
[ 385.748] ABI class: X.Org XInput driver, version 24.1
[ 385.748] (II) Using input driver 'libinput' for 'Power Button'
[ 385.748] (**) Power Button: always reports core events
[ 385.748] (**) Option "Device" "/dev/input/event3"
[ 385.748] (**) Option "_source" "server/udev"
[ 385.749] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 385.749] (II) event3 - Power Button: device is a keyboard
[ 385.749] (II) event3 - Power Button: device removed
[ 385.789] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 385.790] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 385.790] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 385.790] (II) event3 - Power Button: device is a keyboard
[ 385.791] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 385.791] (II) No input driver specified, ignoring this device.
[ 385.791] (II) This device may have been added with another device file.
[ 385.791] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 385.791] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 385.791] (II) Using input driver 'libinput' for 'Power Button'
[ 385.791] (**) Power Button: always reports core events
[ 385.791] (**) Option "Device" "/dev/input/event2"
[ 385.791] (**) Option "_source" "server/udev"
[ 385.791] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 385.791] (II) event2 - Power Button: device is a keyboard
[ 385.791] (II) event2 - Power Button: device removed
[ 385.816] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 385.816] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 385.817] (II) event2 - Power Button: is tagged by udev as: Keyboard
[ 385.817] (II) event2 - Power Button: device is a keyboard
[ 385.818] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 385.818] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 385.818] (II) Using input driver 'libinput' for 'Sleep Button'
[ 385.818] (**) Sleep Button: always reports core events
[ 385.818] (**) Option "Device" "/dev/input/event1"
[ 385.818] (**) Option "_source" "server/udev"
[ 385.819] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 385.819] (II) event1 - Sleep Button: device is a keyboard
[ 385.819] (II) event1 - Sleep Button: device removed
[ 385.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[ 385.856] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 385.858] (II) event1 - Sleep Button: is tagged by udev as: Keyboard
[ 385.859] (II) event1 - Sleep Button: device is a keyboard
[ 385.861] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event5)
[ 385.861] (**) ELAN Touchscreen: Applying InputClass "libinput tablet catchall"
[ 385.861] (II) Using input driver 'libinput' for 'ELAN Touchscreen'
[ 385.861] (**) ELAN Touchscreen: always reports core events
[ 385.861] (**) Option "Device" "/dev/input/event5"
[ 385.861] (**) Option "_source" "server/udev"
[ 385.862] (II) event5 - ELAN Touchscreen: is tagged by udev as: Tablet
[ 385.866] (II) event5 - ELAN Touchscreen: tablet 'ELAN Touchscreen' unknown to libwacom
[ 385.866] (II) event5 - ELAN Touchscreen: device is a tablet
[ 385.866] (II) event5 - ELAN Touchscreen: device removed
[ 385.923] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input10/event5"
[ 385.923] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TABLET, id 9)
[ 385.924] (II) event5 - ELAN Touchscreen: is tagged by udev as: Tablet
[ 385.931] (II) event5 - ELAN Touchscreen: tablet 'ELAN Touchscreen' unknown to libwacom
[ 385.931] (II) event5 - ELAN Touchscreen: device is a tablet
[ 385.931] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse0)
[ 385.931] (II) No input driver specified, ignoring this device.
[ 385.931] (II) This device may have been added with another device file.
[ 385.932] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event6)
[ 385.932] (**) ELAN Touchscreen: Applying InputClass "libinput touchscreen catchall"
[ 385.932] (II) Using input driver 'libinput' for 'ELAN Touchscreen'
[ 385.932] (**) ELAN Touchscreen: always reports core events
[ 385.932] (**) Option "Device" "/dev/input/event6"
[ 385.932] (**) Option "_source" "server/udev"
[ 385.932] (II) event6 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[ 385.932] (II) event6 - ELAN Touchscreen: device is a touch device
[ 385.932] (II) event6 - ELAN Touchscreen: device removed
[ 386.003] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:04F3:2706.0001/input/input11/event6"
[ 386.003] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 10)
[ 386.003] (**) Option "AccelerationScheme" "none"
[ 386.003] (**) ELAN Touchscreen: (accel) selected scheme none/0
[ 386.003] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 386.003] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 386.006] (II) event6 - ELAN Touchscreen: is tagged by udev as: Touchscreen
[ 386.006] (II) event6 - ELAN Touchscreen: device is a touch device
[ 386.008] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 386.008] (II) No input driver specified, ignoring this device.
[ 386.008] (II) This device may have been added with another device file.
[ 386.010] (II) config/udev: Adding input device FiiO DigiHug USB Audio (/dev/input/event7)
[ 386.010] (**) FiiO DigiHug USB Audio: Applying InputClass "libinput keyboard catchall"
[ 386.010] (II) Using input driver 'libinput' for 'FiiO DigiHug USB Audio'
[ 386.010] (**) FiiO DigiHug USB Audio: always reports core events
[ 386.010] (**) Option "Device" "/dev/input/event7"
[ 386.010] (**) Option "_source" "server/udev"
[ 386.014] (II) event7 - FiiO DigiHug USB Audio: is tagged by udev as: Keyboard
[ 386.014] (II) event7 - FiiO DigiHug USB Audio: device is a keyboard
[ 386.014] (II) event7 - FiiO DigiHug USB Audio: device removed
[ 386.076] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.2/1-13.2.2:1.0/0003:1852:7022.0002/input/input15/event7"
[ 386.076] (II) XINPUT: Adding extended input device "FiiO DigiHug USB Audio" (type: KEYBOARD, id 11)
[ 386.080] (II) event7 - FiiO DigiHug USB Audio: is tagged by udev as: Keyboard
[ 386.080] (II) event7 - FiiO DigiHug USB Audio: device is a keyboard
[ 386.082] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard (/dev/input/event8)
[ 386.083] (**) Corsair Corsair STRAFE RGB Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 386.083] (II) Using input driver 'libinput' for 'Corsair Corsair STRAFE RGB Gaming Keyboard'
[ 386.083] (**) Corsair Corsair STRAFE RGB Gaming Keyboard: always reports core events
[ 386.083] (**) Option "Device" "/dev/input/event8"
[ 386.083] (**) Option "_source" "server/udev"
[ 386.086] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: is tagged by udev as: Keyboard
[ 386.086] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: device is a keyboard
[ 386.087] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: device removed
[ 386.123] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.3/1-13.2.3:1.0/0003:1B1C:1B20.0003/input/input16/event8"
[ 386.123] (II) XINPUT: Adding extended input device "Corsair Corsair STRAFE RGB Gaming Keyboard" (type: KEYBOARD, id 12)
[ 386.127] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: is tagged by udev as: Keyboard
[ 386.127] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: device is a keyboard
[ 386.130] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard (/dev/input/event9)
[ 386.130] (**) Corsair Corsair STRAFE RGB Gaming Keyboard: Applying InputClass "libinput keyboard catchall"
[ 386.130] (II) Using input driver 'libinput' for 'Corsair Corsair STRAFE RGB Gaming Keyboard'
[ 386.130] (**) Corsair Corsair STRAFE RGB Gaming Keyboard: always reports core events
[ 386.130] (**) Option "Device" "/dev/input/event9"
[ 386.130] (**) Option "_source" "server/udev"
[ 386.133] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: is tagged by udev as: Keyboard
[ 386.134] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: device is a keyboard
[ 386.134] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: device removed
[ 386.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.3/1-13.2.3:1.1/0003:1B1C:1B20.0004/input/input17/event9"
[ 386.146] (II) XINPUT: Adding extended input device "Corsair Corsair STRAFE RGB Gaming Keyboard" (type: KEYBOARD, id 13)
[ 386.151] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: is tagged by udev as: Keyboard
[ 386.151] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: device is a keyboard
[ 386.153] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control (/dev/input/event10)
[ 386.153] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 386.153] (II) Using input driver 'libinput' for 'Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control'
[ 386.153] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: always reports core events
[ 386.153] (**) Option "Device" "/dev/input/event10"
[ 386.153] (**) Option "_source" "server/udev"
[ 386.157] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 386.157] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: device is a keyboard
[ 386.157] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: device removed
[ 386.189] (II) libinput: Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: needs a virtual subdevice
[ 386.189] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.3/1-13.2.3:1.1/0003:1B1C:1B20.0004/input/input18/event10"
[ 386.189] (II) XINPUT: Adding extended input device "Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control" (type: MOUSE, id 14)
[ 386.190] (**) Option "AccelerationScheme" "none"
[ 386.190] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: (accel) selected scheme none/0
[ 386.190] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: (accel) acceleration factor: 2.000
[ 386.190] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: (accel) acceleration threshold: 4
[ 386.194] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 386.194] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: device is a keyboard
[ 386.196] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard (/dev/input/event11)
[ 386.196] (II) No input driver specified, ignoring this device.
[ 386.196] (II) This device may have been added with another device file.
[ 386.198] (II) config/udev: Adding input device Corsair Corsair STRAFE RGB Gaming Keyboard (/dev/input/event12)
[ 386.198] (II) No input driver specified, ignoring this device.
[ 386.198] (II) This device may have been added with another device file.
[ 386.200] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/event13)
[ 386.200] (**) COMPANY USB Device: Applying InputClass "libinput pointer catchall"
[ 386.200] (II) Using input driver 'libinput' for 'COMPANY USB Device'
[ 386.200] (**) COMPANY USB Device: always reports core events
[ 386.200] (**) Option "Device" "/dev/input/event13"
[ 386.200] (**) Option "_source" "server/udev"
[ 386.259] (II) event13 - COMPANY USB Device: is tagged by udev as: Mouse
[ 386.259] (II) event13 - COMPANY USB Device: device is a pointer
[ 386.260] (II) event13 - COMPANY USB Device: device removed
[ 386.309] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.4/1-13.2.4:1.0/0003:09DA:FC7C.0005/input/input21/event13"
[ 386.309] (II) XINPUT: Adding extended input device "COMPANY USB Device" (type: MOUSE, id 15)
[ 386.310] (**) Option "AccelerationScheme" "none"
[ 386.310] (**) COMPANY USB Device: (accel) selected scheme none/0
[ 386.310] (**) COMPANY USB Device: (accel) acceleration factor: 2.000
[ 386.310] (**) COMPANY USB Device: (accel) acceleration threshold: 4
[ 386.369] (II) event13 - COMPANY USB Device: is tagged by udev as: Mouse
[ 386.370] (II) event13 - COMPANY USB Device: device is a pointer
[ 386.371] (II) config/udev: Adding input device COMPANY USB Device (/dev/input/mouse2)
[ 386.372] (II) No input driver specified, ignoring this device.
[ 386.372] (II) This device may have been added with another device file.
[ 386.373] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam: USB2.0 V (/dev/input/event16)
[ 386.373] (**) USB2.0 VGA UVC WebCam: USB2.0 V: Applying InputClass "libinput keyboard catchall"
[ 386.373] (II) Using input driver 'libinput' for 'USB2.0 VGA UVC WebCam: USB2.0 V'
[ 386.373] (**) USB2.0 VGA UVC WebCam: USB2.0 V: always reports core events
[ 386.373] (**) Option "Device" "/dev/input/event16"
[ 386.373] (**) Option "_source" "server/udev"
[ 386.376] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[ 386.376] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[ 386.376] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: device removed
[ 386.416] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/input/input26/event16"
[ 386.416] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam: USB2.0 V" (type: KEYBOARD, id 16)
[ 386.419] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: is tagged by udev as: Keyboard
[ 386.419] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: device is a keyboard
[ 386.421] (II) config/udev: Adding input device GDX1505:00 27C6:01F1 Touchpad (/dev/input/event15)
[ 386.421] (**) GDX1505:00 27C6:01F1 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 386.421] (II) Using input driver 'libinput' for 'GDX1505:00 27C6:01F1 Touchpad'
[ 386.421] (**) GDX1505:00 27C6:01F1 Touchpad: always reports core events
[ 386.421] (**) Option "Device" "/dev/input/event15"
[ 386.421] (**) Option "_source" "server/udev"
[ 386.533] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: is tagged by udev as: Touchpad
[ 386.555] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: device is a touchpad
[ 386.555] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: device removed
[ 386.617] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-GDX1505:00/0018:27C6:01F1.0007/input/input24/event15"
[ 386.617] (II) XINPUT: Adding extended input device "GDX1505:00 27C6:01F1 Touchpad" (type: TOUCHPAD, id 17)
[ 386.621] (**) Option "AccelerationScheme" "none"
[ 386.621] (**) GDX1505:00 27C6:01F1 Touchpad: (accel) selected scheme none/0
[ 386.621] (**) GDX1505:00 27C6:01F1 Touchpad: (accel) acceleration factor: 2.000
[ 386.621] (**) GDX1505:00 27C6:01F1 Touchpad: (accel) acceleration threshold: 4
[ 386.625] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: is tagged by udev as: Touchpad
[ 386.646] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: device is a touchpad
[ 386.648] (II) config/udev: Adding input device GDX1505:00 27C6:01F1 Touchpad (/dev/input/mouse3)
[ 386.648] (II) No input driver specified, ignoring this device.
[ 386.648] (II) This device may have been added with another device file.
[ 386.649] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event18)
[ 386.649] (II) No input driver specified, ignoring this device.
[ 386.649] (II) This device may have been added with another device file.
[ 386.649] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event17)
[ 386.649] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 386.649] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 386.649] (**) Asus WMI hotkeys: always reports core events
[ 386.649] (**) Option "Device" "/dev/input/event17"
[ 386.649] (**) Option "_source" "server/udev"
[ 386.651] (II) event17 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 386.651] (II) event17 - Asus WMI hotkeys: device is a keyboard
[ 386.651] (II) event17 - Asus WMI hotkeys: device removed
[ 386.723] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input27/event17"
[ 386.723] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 18)
[ 386.725] (II) event17 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 386.725] (II) event17 - Asus WMI hotkeys: device is a keyboard
[ 386.726] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 386.726] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 386.726] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 386.727] (**) AT Translated Set 2 keyboard: always reports core events
[ 386.727] (**) Option "Device" "/dev/input/event4"
[ 386.727] (**) Option "_source" "server/udev"
[ 386.729] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 386.729] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 386.732] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 386.746] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 386.746] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 19)
[ 386.749] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 386.749] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 386.752] (II) config/udev: Adding input device PC Speaker (/dev/input/event14)
[ 386.752] (II) No input driver specified, ignoring this device.
[ 386.752] (II) This device may have been added with another device file.
[ 386.754] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 386.754] (II) Using input driver 'libinput' for 'Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control'
[ 386.754] (**) Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: always reports core events
[ 386.754] (**) Option "Device" "/dev/input/event10"
[ 386.754] (**) Option "_source" "_driver/libinput"
[ 386.754] (II) libinput: Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: is a virtual subdevice
[ 386.754] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2.3/1-13.2.3:1.1/0003:1B1C:1B20.0004/input/input18/event10"
[ 386.754] (II) XINPUT: Adding extended input device "Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control" (type: KEYBOARD, id 20)
[ 388.428] (II) event3 - Power Button: device removed
[ 388.456] (II) event2 - Power Button: device removed
[ 388.483] (II) event1 - Sleep Button: device removed
[ 388.503] (II) event5 - ELAN Touchscreen: device removed
[ 388.576] (II) event6 - ELAN Touchscreen: device removed
[ 388.629] (II) event7 - FiiO DigiHug USB Audio: device removed
[ 388.683] (II) event8 - Corsair Corsair STRAFE RGB Gaming Keyboard: device removed
[ 388.709] (II) event9 - Corsair Corsair STRAFE RGB Gaming Keyboard: device removed
[ 388.736] (II) event13 - COMPANY USB Device: device removed
[ 388.789] (II) event16 - USB2.0 VGA UVC WebCam: USB2.0 V: device removed
[ 388.856] (II) event15 - GDX1505:00 27C6:01F1 Touchpad: device removed
[ 388.909] (II) event17 - Asus WMI hotkeys: device removed
[ 388.963] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 388.989] (II) event10 - Corsair Corsair STRAFE RGB Gaming Keyboard Consumer Control: device removedOffline
#7 2019-05-20 14:38:17
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,163
Re: [SOLVED] Disconnected displays after recent update
Your first post is an xorg log… and you just posted it again.
I didn't ask you to barr, … err… "summarize" those outputs.
Try
lspci -v | curl -F 'f:1=<-' ix.io
lsmod | curl -F 'f:1=<-' ix.ioXorg does not "start in a virtual screen", the nvidia chip has no direct output. That's "normal" but it has to be redirected through the IGP and so far we lack any confirmation that the IGP is operative.
Online
#8 2019-05-20 14:49:50
- saturnteam
- Member
- Registered: 2019-05-20
- Posts: 7
Re: [SOLVED] Disconnected displays after recent update
seth wrote:
Your first post is an xorg log… and you just posted it again.
I didn't ask you to barr, … err… "summarize" those outputs.
Trylspci -v | curl -F 'f:1=<-' ix.io lsmod | curl -F 'f:1=<-' ix.ioXorg does not "start in a virtual screen", the nvidia chip has no direct output. That's "normal" but it has to be redirected through the IGP and so far we lack any confirmation that the IGP is operative.
Offline
#9 2019-05-20 15:06:35
- saturnteam
- Member
- Registered: 2019-05-20
- Posts: 7
Re: [SOLVED] Disconnected displays after recent update
I've downgraded kernel, and now I get flickers. Kernel module is not loaded, and I get "Failed to initialize the NVIDIA kernel module" in xorg log
Offline
#10 2019-05-20 15:17:30
- saturnteam
- Member
- Registered: 2019-05-20
- Posts: 7
Re: [SOLVED] Disconnected displays after recent update
Solved! I've installed previous kernel and removed xorg.conf
It seems my notebook Ux580 is too new for linux
Last edited by saturnteam (2019-05-20 15:18:20)
Offline