HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

geister · 2019-06-24 20:44:58

Hey everyone,

i just bought the HP Envy x360 13-ag0700ng Convertible Laptop and installed Arch Linux (5.1.12-arch1-1-ARCH) on it. Every works fine so far, except touchscreen and pen (N-Trig Technology).

After a research i found this solution: https://bugzilla.kernel.org/show_bug.cgi?id=198715#c14 My problem is i havn't the necessary know-how to install the patch. Can someone help me? Or is there a better solution to solve the problem then this hack?

Systeminformation:
HP ENVY x360 - 13-ag0700ng
AMD Ryzen™ 5 2500 Quad-Core
DDR4-2400 SDRAM 8 GB
AMD Radeon™ Vega 8
256 GB PCIe® NVMe™ M.2 SSD
FHD IPS Micro-Edge Touchscreen (1920 x 1080)

dmesg shows this:

[    0.000000] Linux version 5.1.12-arch1-1-ARCH (builduser@heftig-24809) (gcc version 9.1.0 (GCC)) #1 SMP PREEMPT Wed Jun 19 09:16:00 UTC 2019
[    0.000000] Command line: initrd=\initramfs-linux.img root=/dev/nvme0n1p5 rw resume=/dev/nvme0n1p6
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000003ffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000400a000-0x0000000009e9ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009ea0000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000009ca97fff] usable
[    0.000000] BIOS-e820: [mem 0x000000009ca98000-0x000000009cb83fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009cb84000-0x000000009cbb3fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009cbb4000-0x000000009d08bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000009d08c000-0x000000009d838fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000009d839000-0x000000009effffff] usable
[    0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe800000-0x00000000fe800fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f33ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000021f340000-0x000000021fffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x98d85018-0x98d92457] usable ==> usable
[    0.000000] e820: update [mem 0x98d85018-0x98d92457] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000003ffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000004000000-0x0000000004009fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000000400a000-0x0000000009e9ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009ea0000-0x0000000009ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000a000000-0x0000000098d85017] usable
[    0.000000] reserve setup_data: [mem 0x0000000098d85018-0x0000000098d92457] usable
[    0.000000] reserve setup_data: [mem 0x0000000098d92458-0x000000009ca97fff] usable
[    0.000000] reserve setup_data: [mem 0x000000009ca98000-0x000000009cb83fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009cb84000-0x000000009cbb3fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000009cbb4000-0x000000009d08bfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000009d08c000-0x000000009d838fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000009d839000-0x000000009effffff] usable
[    0.000000] reserve setup_data: [mem 0x000000009f000000-0x00000000dfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd100000-0x00000000fdffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe800000-0x00000000fe800fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000021f33ffff] usable
[    0.000000] reserve setup_data: [mem 0x000000021f340000-0x000000021fffffff] reserved
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x9cb93000  ACPI=0x9cb93000  SMBIOS=0x9d634000  SMBIOS 3.0=0x9d633000  ESRT=0x99e81818  TPMEventLog=0x98db7018 
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: HP HP ENVY x360 Convertible 13-ag0xxx/8496, BIOS F.35 04/02/2019
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1996.134 MHz processor
[    0.001071] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001072] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001079] last_pfn = 0x21f340 max_arch_pfn = 0x400000000
[    0.001083] MTRR default type: uncachable
[    0.001084] MTRR fixed ranges enabled:
[    0.001085]   00000-9FFFF write-back
[    0.001085]   A0000-BFFFF write-through
[    0.001086]   C0000-FFFFF write-protect
[    0.001087] MTRR variable ranges enabled:
[    0.001088]   0 base 000000000000 mask FFFF80000000 write-back
[    0.001089]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.001090]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.001090]   3 disabled
[    0.001091]   4 disabled
[    0.001091]   5 disabled
[    0.001091]   6 disabled
[    0.001092]   7 disabled
[    0.001093] TOM2: 0000000220000000 aka 8704M
[    0.001421] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001527] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.001545] last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[    0.005219] esrt: Reserving ESRT space from 0x0000000099e81818 to 0x0000000099e81850.
[    0.005234] check: Scanning 1 areas for low memory corruption
[    0.005243] Using GB pages for direct mapping
[    0.005245] BRK [0x175001000, 0x175001fff] PGTABLE
[    0.005247] BRK [0x175002000, 0x175002fff] PGTABLE
[    0.005247] BRK [0x175003000, 0x175003fff] PGTABLE
[    0.005269] BRK [0x175004000, 0x175004fff] PGTABLE
[    0.005270] BRK [0x175005000, 0x175005fff] PGTABLE
[    0.005370] BRK [0x175006000, 0x175006fff] PGTABLE
[    0.005403] BRK [0x175007000, 0x175007fff] PGTABLE
[    0.005467] BRK [0x175008000, 0x175008fff] PGTABLE
[    0.005498] BRK [0x175009000, 0x175009fff] PGTABLE
[    0.005549] BRK [0x17500a000, 0x17500afff] PGTABLE
[    0.005613] BRK [0x17500b000, 0x17500bfff] PGTABLE
[    0.005654] Secure boot disabled
[    0.005655] RAMDISK: [mem 0x7f730000-0x7fffefff]
[    0.005665] ACPI: Early table checksum verification disabled
[    0.005668] ACPI: RSDP 0x000000009CB93000 000024 (v02 HPQOEM)
[    0.005671] ACPI: XSDT 0x000000009CB930B0 0000E4 (v01 HPQOEM SLIC-MPC 01072009 HP   00010013)
[    0.005676] ACPI: FACP 0x000000009CBA86C8 000114 (v06 HPQOEM SLIC-MPC 01072009 HP   00010013)
[    0.005680] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190215/tbfadt-615)
[    0.005683] ACPI: DSDT 0x000000009CB93228 01549C (v02 HPQOEM 8496     01072009 ACPI 20120913)
[    0.005686] ACPI: FACS 0x000000009D03AF00 000040
[    0.005687] ACPI: APIC 0x000000009CBA87E0 0000DE (v03 HPQOEM 8496     01072009 HP   00010013)
[    0.005689] ACPI: FPDT 0x000000009CBA88C0 000044 (v01 HPQOEM 8496     01072009 HP   00010013)
[    0.005692] ACPI: FIDT 0x000000009CBA8908 00009C (v01 HPQOEM 8496     01072009 HP   00010013)
[    0.005694] ACPI: SSDT 0x000000009CBA89A8 005472 (v02 HPQOEM 8496     00000002 ACPI 02000002)
[    0.005696] ACPI: SSDT 0x000000009CBADE20 00119C (v01 HPQOEM 8496     00000001 ACPI 00000001)
[    0.005698] ACPI: CRAT 0x000000009CBAEFC0 000810 (v01 HPQOEM 8496     00000001 HP   00000001)
[    0.005700] ACPI: CDIT 0x000000009CBAF7D0 000029 (v01 HPQOEM 8496     00000001 HP   00000001)
[    0.005702] ACPI: MCFG 0x000000009CBAF800 00003C (v01 HPQOEM 8496     01072009 HP   00010013)
[    0.005704] ACPI: MSDM 0x000000009CBAF840 000055 (v03 HPQOEM SLIC-MPC 00000001 HP   00010013)
[    0.005706] ACPI: HPET 0x000000009CBAF898 000038 (v01 HPQOEM 8496     01072009 HP   00000005)
[    0.005708] ACPI: UEFI 0x000000009CBAF8D0 000048 (v01 HPQOEM 8496     00000000 HP   00000000)
[    0.005710] ACPI: SSDT 0x000000009CBAF918 000070 (v01 HPQOEM 8496     00000001 ACPI 20120913)
[    0.005712] ACPI: TPM2 0x000000009CBAF988 000034 (v04 HPQOEM 8496     00000001 HP   00000000)
[    0.005714] ACPI: IVRS 0x000000009CBAF9C0 0000D0 (v02 HPQOEM 8496     00000001 HP   00000000)
[    0.005716] ACPI: SSDT 0x000000009CBAFA90 0005C1 (v01 HPQOEM 8496     00000001 ACPI 20120913)
[    0.005718] ACPI: SSDT 0x000000009CBB0058 000C33 (v01 HPQOEM 8496     00000001 ACPI 20120913)
[    0.005720] ACPI: SSDT 0x000000009CBB0C90 0010F5 (v01 HPQOEM 8496     00000001 ACPI 20120913)
[    0.005722] ACPI: SSDT 0x000000009CBB1D88 001B4E (v01 HPQOEM 8496     00000001 ACPI 20120913)
[    0.005724] ACPI: WSMT 0x000000009CBB38D8 000028 (v01 HPQOEM 8496     01072009 HP   00010013)
[    0.005726] ACPI: SSDT 0x000000009CBB3900 0000C7 (v01 HPQOEM 8496     00000001 ACPI 20120913)
[    0.005728] ACPI: SSDT 0x000000009CBB39C8 00019A (v01 HPQOEM 8496     00000001 ACPI 20120913)
[    0.005730] ACPI: SSDT 0x000000009CBB3B68 0001F2 (v01 HPQOEM 8496     00000001 ACPI 20120913)
[    0.005732] ACPI: BGRT 0x000000009CBB3D60 000038 (v01 HPQOEM 8496     01072009 HP   00010013)
[    0.005737] ACPI: Local APIC address 0xfee00000
[    0.005896] No NUMA configuration found
[    0.005897] Faking a node at [mem 0x0000000000000000-0x000000021f33ffff]
[    0.005900] NODE_DATA(0) allocated [mem 0x21f33c000-0x21f33ffff]
[    0.005918] Zone ranges:
[    0.005919]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.005920]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.005920]   Normal   [mem 0x0000000100000000-0x000000021f33ffff]
[    0.005921]   Device   empty
[    0.005922] Movable zone start for each node
[    0.005922] Early memory node ranges
[    0.005923]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.005924]   node   0: [mem 0x0000000000100000-0x0000000003ffffff]
[    0.005924]   node   0: [mem 0x000000000400a000-0x0000000009e9ffff]
[    0.005925]   node   0: [mem 0x000000000a000000-0x000000009ca97fff]
[    0.005925]   node   0: [mem 0x000000009d839000-0x000000009effffff]
[    0.005926]   node   0: [mem 0x0000000100000000-0x000000021f33ffff]
[    0.006017] Zeroed struct page in unavailable ranges: 8044 pages
[    0.006018] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f33ffff]
[    0.006019] On node 0 totalpages: 1823700
[    0.006020]   DMA zone: 64 pages used for memmap
[    0.006021]   DMA zone: 25 pages reserved
[    0.006022]   DMA zone: 3999 pages, LIFO batch:0
[    0.006089]   DMA32 zone: 10052 pages used for memmap
[    0.006089]   DMA32 zone: 643317 pages, LIFO batch:63
[    0.017289]   Normal zone: 18381 pages used for memmap
[    0.017292]   Normal zone: 1176384 pages, LIFO batch:63
[    0.036111] ACPI: PM-Timer IO Port: 0x808
[    0.036115] ACPI: Local APIC address 0xfee00000
[    0.036121] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.036140] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.036151] IOAPIC[1]: apic_id 10, version 33, address 0xfec01000, GSI 24-55
[    0.036153] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.036155] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.036156] ACPI: IRQ0 used by override.
[    0.036157] ACPI: IRQ9 used by override.
[    0.036158] Using ACPI (MADT) for SMP configuration information
[    0.036159] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.036170] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[    0.036195] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.036196] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.036197] PM: Registered nosave memory: [mem 0x04000000-0x04009fff]
[    0.036199] PM: Registered nosave memory: [mem 0x09ea0000-0x09ffffff]
[    0.036200] PM: Registered nosave memory: [mem 0x98d85000-0x98d85fff]
[    0.036201] PM: Registered nosave memory: [mem 0x98d92000-0x98d92fff]
[    0.036203] PM: Registered nosave memory: [mem 0x9ca98000-0x9cb83fff]
[    0.036203] PM: Registered nosave memory: [mem 0x9cb84000-0x9cbb3fff]
[    0.036203] PM: Registered nosave memory: [mem 0x9cbb4000-0x9d08bfff]
[    0.036204] PM: Registered nosave memory: [mem 0x9d08c000-0x9d838fff]
[    0.036205] PM: Registered nosave memory: [mem 0x9f000000-0xdfffffff]
[    0.036206] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.036206] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.036206] PM: Registered nosave memory: [mem 0xfc000000-0xfd0fffff]
[    0.036207] PM: Registered nosave memory: [mem 0xfd100000-0xfdffffff]
[    0.036207] PM: Registered nosave memory: [mem 0xfe000000-0xfe7fffff]
[    0.036208] PM: Registered nosave memory: [mem 0xfe800000-0xfe800fff]
[    0.036208] PM: Registered nosave memory: [mem 0xfe801000-0xfeb7ffff]
[    0.036208] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.036209] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.036209] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.036210] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.036210] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.036211] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.036211] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.036211] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.036212] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.036212] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[    0.036213] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[    0.036213] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[    0.036213] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[    0.036214] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[    0.036214] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.036215] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.036215] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.036217] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.036218] Booting paravirtualized kernel on bare hardware
[    0.036221] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.134605] random: get_random_bytes called from start_kernel+0x8d/0x530 with crng_init=0
[    0.134624] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:16 nr_node_ids:1
[    0.135364] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u262144
[    0.135372] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.135373] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.135393] Built 1 zonelists, mobility grouping on.  Total pages: 1795178
[    0.135394] Policy zone: Normal
[    0.135396] Kernel command line: initrd=\initramfs-linux.img root=/dev/nvme0n1p5 rw resume=/dev/nvme0n1p6
[    0.142400] Calgary: detecting Calgary via BIOS EBDA area
[    0.142403] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.158251] Memory: 6985676K/7294800K available (12291K kernel code, 1317K rwdata, 3764K rodata, 1564K init, 3736K bss, 309124K reserved, 0K cma-reserved)
[    0.159471] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.159492] ftrace: allocating 37083 entries in 145 pages
[    0.172026] rcu: Preemptible hierarchical RCU implementation.
[    0.172027] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.172028] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.172028] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
[    0.172029] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.172029] 	Tasks RCU enabled.
[    0.172030] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.172030] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[    0.173517] NR_IRQS: 20736, nr_irqs: 1096, preallocated irqs: 16
[    0.173693] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.173753] Console: colour dummy device 80x25
[    0.173756] printk: console [tty0] enabled
[    0.173805] ACPI: Core revision 20190215
[    0.174188] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.174214] hpet clockevent registered
[    0.174220] APIC: Switch to symmetric I/O mode setup
[    0.494272] Switched APIC routing to physical flat.
[    0.495468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.510910] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x398bd529e78, max_idle_ns: 881590816213 ns
[    0.510919] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.61 BogoMIPS (lpj=6653780)
[    0.510921] pid_max: default: 32768 minimum: 301
[    0.514113] LSM: Security Framework initializing
[    0.514117] Yama: becoming mindful.
[    0.515516] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.516208] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.516311] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.516340] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.516699] *** VALIDATE proc ***
[    0.516767] *** VALIDATE cgroup1 ***
[    0.516768] *** VALIDATE cgroup2 ***
[    0.516976] LVT offset 1 assigned for vector 0xf9
[    0.517025] LVT offset 2 assigned for vector 0xf4
[    0.517035] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.517036] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.517037] Spectre V2 : Mitigation: Full AMD retpoline
[    0.517037] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.517044] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.517044] Spectre V2 : User space: Vulnerable
[    0.517045] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.517241] Freeing SMP alternatives memory: 28K
[    0.524244] smpboot: CPU0: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx (family: 0x17, model: 0x11, stepping: 0x0)
[    0.540931] Performance Events: Fam17h core perfctr, AMD PMU driver.
[    0.540939] ... version:                0
[    0.540940] ... bit width:              48
[    0.540941] ... generic registers:      6
[    0.540942] ... value mask:             0000ffffffffffff
[    0.540943] ... max period:             00007fffffffffff
[    0.540944] ... fixed-purpose events:   0
[    0.540945] ... event mask:             000000000000003f
[    0.547590] rcu: Hierarchical SRCU implementation.
[    0.570944] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.577603] smp: Bringing up secondary CPUs ...
[    0.617613] x86: Booting SMP configuration:
[    0.617616] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7
[    0.859894] smp: Brought up 1 node, 8 CPUs
[    0.859894] smpboot: Max logical packages: 2
[    0.859894] smpboot: Total of 8 processors activated (31950.90 BogoMIPS)
[    0.861243] devtmpfs: initialized
[    0.861243] x86/mm: Memory block size: 128MB
[    0.861853] PM: Registering ACPI NVS region [mem 0x04000000-0x04009fff] (40960 bytes)
[    0.861853] PM: Registering ACPI NVS region [mem 0x9cbb4000-0x9d08bfff] (5079040 bytes)
[    0.861853] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.861853] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.861853] pinctrl core: initialized pinctrl subsystem
[    0.861853] PM: RTC time: 19:42:09, date: 2019-06-24
[    0.864519] NET: Registered protocol family 16
[    0.864607] audit: initializing netlink subsys (disabled)
[    0.864613] audit: type=2000 audit(1561405328.373:1): state=initialized audit_enabled=0 res=1
[    0.864613] cpuidle: using governor ladder
[    0.864613] cpuidle: using governor menu
[    0.864613] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.864613] ACPI: bus type PCI registered
[    0.864613] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.864613] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.864613] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.864613] PCI: Using configuration type 1 for base access
[    0.865741] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.865741] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.867769] ACPI: Added _OSI(Module Device)
[    0.867770] ACPI: Added _OSI(Processor Device)
[    0.867771] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.867771] ACPI: Added _OSI(Processor Aggregator Device)
[    0.867772] ACPI: Added _OSI(Linux-Dell-Video)
[    0.867773] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.867773] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.869592] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.883549] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.889578] ACPI: EC: EC started
[    0.889579] ACPI: EC: interrupt blocked
[    0.944368] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.944382] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.944390] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions
[    0.944393] ACPI: Interpreter enabled
[    0.944506] ACPI: (supports S0 S3 S4 S5)
[    0.944513] ACPI: Using IOAPIC for interrupt routing
[    0.951225] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.953602] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.969575] ACPI: Power Resource [P0ST] (on)
[    0.969661] ACPI: Power Resource [P3ST] (on)
[    0.978391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.978398] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.978700] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[    0.978944] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.978946] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.978962] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.979456] PCI host bridge to bus 0000:00
[    0.979459] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.979460] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.979461] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.979463] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.979464] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.979465] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.979466] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfebfffff window]
[    0.979467] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.979469] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.979479] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[    0.979656] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
[    0.979848] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.980003] pci 0000:00:01.5: [1022:15d3] type 01 class 0x060400
[    0.980065] pci 0000:00:01.5: enabling Extended Tags
[    0.980137] pci 0000:00:01.5: PME# supported from D0 D3hot D3cold
[    0.980272] pci 0000:00:01.6: [1022:15d3] type 01 class 0x060400
[    0.980333] pci 0000:00:01.6: enabling Extended Tags
[    0.980432] pci 0000:00:01.6: PME# supported from D0 D3hot D3cold
[    0.980571] pci 0000:00:01.7: [1022:15d3] type 01 class 0x060400
[    0.980632] pci 0000:00:01.7: enabling Extended Tags
[    0.980703] pci 0000:00:01.7: PME# supported from D0 D3hot D3cold
[    0.980845] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.980993] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[    0.981057] pci 0000:00:08.1: enabling Extended Tags
[    0.981124] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.981240] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[    0.981302] pci 0000:00:08.2: enabling Extended Tags
[    0.981364] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[    0.981510] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.981729] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.981929] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[    0.982003] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[    0.982079] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[    0.982156] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[    0.982226] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[    0.982295] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[    0.982364] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[    0.982439] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[    0.982647] pci 0000:01:00.0: [144d:a808] type 00 class 0x010802
[    0.982681] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfd003fff 64bit]
[    0.983016] pci 0000:00:01.5: PCI bridge to [bus 01]
[    0.983024] pci 0000:00:01.5:   bridge window [mem 0xfd000000-0xfd0fffff]
[    0.983133] pci 0000:02:00.0: [10ec:522a] type 00 class 0xff0000
[    0.983164] pci 0000:02:00.0: reg 0x10: [mem 0xfcf00000-0xfcf00fff]
[    0.983303] pci 0000:02:00.0: supports D1 D2
[    0.983304] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.983524] pci 0000:00:01.6: PCI bridge to [bus 02]
[    0.983531] pci 0000:00:01.6:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.983624] pci 0000:03:00.0: [10ec:b822] type 00 class 0x028000
[    0.983662] pci 0000:03:00.0: reg 0x10: [io  0xf000-0xf0ff]
[    0.983691] pci 0000:03:00.0: reg 0x18: [mem 0xfce00000-0xfce0ffff 64bit]
[    0.983832] pci 0000:03:00.0: supports D1 D2
[    0.983833] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.984018] pci 0000:00:01.7: PCI bridge to [bus 03]
[    0.984024] pci 0000:00:01.7:   bridge window [io  0xf000-0xffff]
[    0.984027] pci 0000:00:01.7:   bridge window [mem 0xfce00000-0xfcefffff]
[    0.984156] pci 0000:04:00.0: [1002:15dd] type 00 class 0x030000
[    0.984205] pci 0000:04:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.984224] pci 0000:04:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.984236] pci 0000:04:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.984250] pci 0000:04:00.0: reg 0x24: [mem 0xfcc00000-0xfcc7ffff]
[    0.984271] pci 0000:04:00.0: enabling Extended Tags
[    0.984287] pci 0000:04:00.0: BAR 0: assigned to efifb
[    0.984396] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.984553] pci 0000:04:00.1: [1002:15de] type 00 class 0x040300
[    0.984583] pci 0000:04:00.1: reg 0x10: [mem 0xfccc8000-0xfcccbfff]
[    0.984658] pci 0000:04:00.1: enabling Extended Tags
[    0.984732] pci 0000:04:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.984826] pci 0000:04:00.2: [1022:15df] type 00 class 0x108000
[    0.984878] pci 0000:04:00.2: reg 0x18: [mem 0xfcb00000-0xfcbfffff]
[    0.984911] pci 0000:04:00.2: reg 0x24: [mem 0xfccce000-0xfcccffff]
[    0.984932] pci 0000:04:00.2: enabling Extended Tags
[    0.985105] pci 0000:04:00.3: [1022:15e0] type 00 class 0x0c0330
[    0.985141] pci 0000:04:00.3: reg 0x10: [mem 0xfca00000-0xfcafffff 64bit]
[    0.985205] pci 0000:04:00.3: enabling Extended Tags
[    0.985287] pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
[    0.985394] pci 0000:04:00.4: [1022:15e1] type 00 class 0x0c0330
[    0.985430] pci 0000:04:00.4: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
[    0.985493] pci 0000:04:00.4: enabling Extended Tags
[    0.985574] pci 0000:04:00.4: PME# supported from D0 D3hot D3cold
[    0.985690] pci 0000:04:00.5: [1022:15e2] type 00 class 0x048000
[    0.985720] pci 0000:04:00.5: reg 0x10: [mem 0xfcc80000-0xfccbffff]
[    0.985794] pci 0000:04:00.5: enabling Extended Tags
[    0.985868] pci 0000:04:00.5: PME# supported from D0 D3hot D3cold
[    0.985970] pci 0000:04:00.6: [1022:15e3] type 00 class 0x040300
[    0.986000] pci 0000:04:00.6: reg 0x10: [mem 0xfccc0000-0xfccc7fff]
[    0.986074] pci 0000:04:00.6: enabling Extended Tags
[    0.986148] pci 0000:04:00.6: PME# supported from D0 D3hot D3cold
[    0.986250] pci 0000:04:00.7: [1022:15e4] type 00 class 0x000000
[    0.986302] pci 0000:04:00.7: reg 0x18: [mem 0xfc800000-0xfc8fffff]
[    0.986335] pci 0000:04:00.7: reg 0x24: [mem 0xfcccc000-0xfcccdfff]
[    0.986356] pci 0000:04:00.7: enabling Extended Tags
[    0.986591] pci 0000:00:08.1: PCI bridge to [bus 04]
[    0.986596] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    0.986600] pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfccfffff]
[    0.986605] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.986692] pci 0000:05:00.0: [1022:7901] type 00 class 0x010601
[    0.986777] pci 0000:05:00.0: reg 0x24: [mem 0xfcd00000-0xfcd007ff]
[    0.986798] pci 0000:05:00.0: enabling Extended Tags
[    0.986880] pci 0000:05:00.0: PME# supported from D3hot D3cold
[    0.987007] pci 0000:00:08.2: PCI bridge to [bus 05]
[    0.987015] pci 0000:00:08.2:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.987548] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.987639] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.987700] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.987778] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.987846] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.987902] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.987957] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.988012] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.990917] ACPI: EC: interrupt unblocked
[    0.990917] ACPI: EC: event unblocked
[    0.990917] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.990917] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
[    0.990937] pci 0000:04:00.0: vgaarb: setting as boot VGA device
[    0.990939] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.990942] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.990942] vgaarb: loaded
[    0.991198] ACPI: bus type USB registered
[    0.991208] usbcore: registered new interface driver usbfs
[    0.991220] usbcore: registered new interface driver hub
[    0.991255] usbcore: registered new device driver usb
[    0.992398] pps_core: LinuxPPS API ver. 1 registered
[    0.992398] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.992398] PTP clock support registered
[    0.992398] EDAC MC: Ver: 3.0.0
[    0.994279] Registered efivars operations
[    1.024497] PCI: Using ACPI for IRQ routing
[    1.026846] PCI: pci_cache_line_size set to 64 bytes
[    1.027124] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    1.027127] e820: reserve RAM buffer [mem 0x09ea0000-0x0bffffff]
[    1.027129] e820: reserve RAM buffer [mem 0x98d85018-0x9bffffff]
[    1.027130] e820: reserve RAM buffer [mem 0x9ca98000-0x9fffffff]
[    1.027131] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[    1.027131] e820: reserve RAM buffer [mem 0x21f340000-0x21fffffff]
[    1.027581] NetLabel: Initializing
[    1.027581] NetLabel:  domain hash size = 128
[    1.027581] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.027581] NetLabel:  unlabeled traffic allowed by default
[    1.027625] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.027628] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    1.030915] clocksource: Switched to clocksource tsc-early
[    1.046228] VFS: Disk quotas dquot_6.6.0
[    1.046273] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.046329] *** VALIDATE hugetlbfs ***
[    1.046386] pnp: PnP ACPI init
[    1.046562] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.046567] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.046706] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.046799] pnp 00:02: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    1.046821] pnp 00:03: Plug and Play ACPI device, IDs SYN3274 ETD0000 PNP0f13 (active)
[    1.047085] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    1.047086] system 00:04: [io  0x040b] has been reserved
[    1.047088] system 00:04: [io  0x04d6] has been reserved
[    1.047089] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    1.047090] system 00:04: [io  0x0c14] has been reserved
[    1.047091] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    1.047092] system 00:04: [io  0x0c52] has been reserved
[    1.047093] system 00:04: [io  0x0c6c] has been reserved
[    1.047094] system 00:04: [io  0x0c6f] has been reserved
[    1.047095] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    1.047096] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    1.047097] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    1.047098] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    1.047098] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    1.047099] system 00:04: [io  0x0800-0x089f] has been reserved
[    1.047100] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    1.047101] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    1.047102] system 00:04: [io  0x0900-0x090f] has been reserved
[    1.047103] system 00:04: [io  0x0910-0x091f] has been reserved
[    1.047105] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.047106] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    1.047107] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    1.047108] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.047109] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    1.047111] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    1.047112] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    1.047115] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.047948] pnp: PnP ACPI: found 5 devices
[    1.054775] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.054785] pci 0000:00:01.6: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    1.054787] pci 0000:00:01.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    1.054796] pci 0000:00:01.6: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[    1.054799] pci 0000:00:01.6: BAR 13: assigned [io  0x1000-0x1fff]
[    1.054801] pci 0000:00:01.5: PCI bridge to [bus 01]
[    1.054807] pci 0000:00:01.5:   bridge window [mem 0xfd000000-0xfd0fffff]
[    1.054816] pci 0000:00:01.6: PCI bridge to [bus 02]
[    1.054818] pci 0000:00:01.6:   bridge window [io  0x1000-0x1fff]
[    1.054823] pci 0000:00:01.6:   bridge window [mem 0xfcf00000-0xfcffffff]
[    1.054826] pci 0000:00:01.6:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    1.054833] pci 0000:00:01.7: PCI bridge to [bus 03]
[    1.054835] pci 0000:00:01.7:   bridge window [io  0xf000-0xffff]
[    1.054839] pci 0000:00:01.7:   bridge window [mem 0xfce00000-0xfcefffff]
[    1.054849] pci 0000:00:08.1: PCI bridge to [bus 04]
[    1.054856] pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
[    1.054860] pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfccfffff]
[    1.054864] pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    1.054870] pci 0000:00:08.2: PCI bridge to [bus 05]
[    1.054875] pci 0000:00:08.2:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    1.054884] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    1.054885] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    1.054886] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    1.054887] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    1.054888] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    1.054889] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    1.054890] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfebfffff window]
[    1.054891] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    1.054892] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfd0fffff]
[    1.054893] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    1.054894] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff]
[    1.054895] pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    1.054896] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    1.054897] pci_bus 0000:03: resource 1 [mem 0xfce00000-0xfcefffff]
[    1.054898] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    1.054899] pci_bus 0000:04: resource 1 [mem 0xfc800000-0xfccfffff]
[    1.054900] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    1.054901] pci_bus 0000:05: resource 1 [mem 0xfcd00000-0xfcdfffff]
[    1.055126] NET: Registered protocol family 2
[    1.055370] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    1.055402] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.055491] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.055627] TCP: Hash tables configured (established 65536 bind 65536)
[    1.055675] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.055696] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.055847] NET: Registered protocol family 1
[    1.055851] NET: Registered protocol family 44
[    1.056004] pci 0000:04:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.056444] PCI: CLS 64 bytes, default 64
[    1.056492] Unpacking initramfs...
[    1.163416] Freeing initrd memory: 9020K
[    1.163456] pci 0000:00:00.2: AMD-Vi: Unable to write to IOMMU perf counter.
[    1.163473] fbcon: Taking over console
[    1.163602] pci 0000:00:00.2: can't derive routing for PCI INT A
[    1.163603] pci 0000:00:00.2: PCI INT A: not connected
[    1.164087] pci 0000:00:01.0: Adding to iommu group 0
[    1.164318] pci 0000:00:01.5: Adding to iommu group 1
[    1.164536] pci 0000:00:01.6: Adding to iommu group 2
[    1.164758] pci 0000:00:01.7: Adding to iommu group 3
[    1.164972] pci 0000:00:08.0: Adding to iommu group 4
[    1.165192] pci 0000:00:08.1: Adding to iommu group 5
[    1.165238] pci 0000:00:08.2: Adding to iommu group 4
[    1.165462] pci 0000:00:14.0: Adding to iommu group 6
[    1.165489] pci 0000:00:14.3: Adding to iommu group 6
[    1.165714] pci 0000:00:18.0: Adding to iommu group 7
[    1.165740] pci 0000:00:18.1: Adding to iommu group 7
[    1.165763] pci 0000:00:18.2: Adding to iommu group 7
[    1.165794] pci 0000:00:18.3: Adding to iommu group 7
[    1.165825] pci 0000:00:18.4: Adding to iommu group 7
[    1.165848] pci 0000:00:18.5: Adding to iommu group 7
[    1.165871] pci 0000:00:18.6: Adding to iommu group 7
[    1.165897] pci 0000:00:18.7: Adding to iommu group 7
[    1.166163] pci 0000:01:00.0: Adding to iommu group 8
[    1.166439] pci 0000:02:00.0: Adding to iommu group 9
[    1.166653] pci 0000:03:00.0: Adding to iommu group 10
[    1.166989] pci 0000:04:00.0: Adding to iommu group 11
[    1.167140] pci 0000:04:00.0: Using iommu direct mapping
[    1.167299] pci 0000:04:00.1: Adding to iommu group 12
[    1.167350] pci 0000:04:00.2: Adding to iommu group 12
[    1.167393] pci 0000:04:00.3: Adding to iommu group 12
[    1.167437] pci 0000:04:00.4: Adding to iommu group 12
[    1.167480] pci 0000:04:00.5: Adding to iommu group 12
[    1.167524] pci 0000:04:00.6: Adding to iommu group 12
[    1.167566] pci 0000:04:00.7: Adding to iommu group 12
[    1.167592] pci 0000:05:00.0: Adding to iommu group 4
[    1.167887] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    1.167888] pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
[    1.167889]  PPR NX GT IA GA PC GA_vAPIC
[    1.167892] AMD-Vi: Interrupt remapping enabled
[    1.167892] AMD-Vi: Virtual APIC enabled
[    1.168116] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.169214] amd_uncore: AMD NB counters detected
[    1.169217] amd_uncore: AMD LLC counters detected
[    1.169555] check: Scanning for low memory corruption every 60 seconds
[    1.170371] Initialise system trusted keyrings
[    1.170442] Key type blacklist registered
[    1.170597] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.172411] zbud: loaded
[    1.223296] Key type asymmetric registered
[    1.223298] Asymmetric key parser 'x509' registered
[    1.223314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.223394] io scheduler mq-deadline registered
[    1.223395] io scheduler kyber registered
[    1.223518] io scheduler bfq registered
[    1.223984] pcieport 0000:00:01.5: Signaling PME with IRQ 26
[    1.224091] aer 0000:00:01.5:pcie002: AER enabled with IRQ 26
[    1.224298] pcieport 0000:00:01.6: Signaling PME with IRQ 27
[    1.224387] aer 0000:00:01.6:pcie002: AER enabled with IRQ 27
[    1.224412] pciehp 0000:00:01.6:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[    1.224661] pcieport 0000:00:01.7: Signaling PME with IRQ 28
[    1.224764] aer 0000:00:01.7:pcie002: AER enabled with IRQ 28
[    1.224935] pcieport 0000:00:08.1: Signaling PME with IRQ 29
[    1.225215] pcieport 0000:00:08.2: Signaling PME with IRQ 30
[    1.225291] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.225411] efifb: probing for efifb
[    1.225426] efifb: framebuffer at 0xe0000000, using 1952k, total 1950k
[    1.225427] efifb: mode is 800x600x32, linelength=3328, pages=1
[    1.225427] efifb: scrolling: redraw
[    1.225429] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.225535] Console: switching to colour frame buffer device 100x37
[    1.226630] fb0: EFI VGA frame buffer device
[    1.226709] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.226715] ACPI: Power Button [PWRB]
[    1.226765] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.226786] ACPI: Lid Switch [LID0]
[    1.226832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.228752] ACPI: Power Button [PWRF]
[    1.228935] ACPI: Video Device [VGA2] (multi-head: yes  rom: no  post: no)
[    1.229216] acpi device:15: registered as cooling_device0
[    1.229265] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:14/LNXVIDEO:02/input/input3
[    1.229319] Monitor-Mwait will be used to enter C-1 state
[    1.236273] thermal LNXTHERM:00: registered as thermal_zone0
[    1.236274] ACPI: Thermal Zone [TZS0] (59 C)
[    1.236654] thermal LNXTHERM:01: registered as thermal_zone1
[    1.236655] ACPI: Thermal Zone [TZS1] (56 C)
[    1.236873] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.239508] nvme nvme0: pci function 0000:01:00.0
[    1.239562] usbcore: registered new interface driver usbserial_generic
[    1.239566] usbserial: USB Serial support registered for generic
[    1.239596] rtc_cmos 00:01: RTC can wake from S4
[    1.240207] rtc_cmos 00:01: registered as rtc0
[    1.240228] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.240409] ledtrig-cpu: registered to indicate activity on CPUs
[    1.240842] NET: Registered protocol family 10
[    1.247300] Segment Routing with IPv6
[    1.247327] NET: Registered protocol family 17
[    1.248254] mce: Using 23 MCE banks
[    1.248268] RAS: Correctable Errors collector initialized.
[    1.248315] microcode: CPU0: patch_level=0x0810100b
[    1.248327] microcode: CPU1: patch_level=0x0810100b
[    1.248347] microcode: CPU2: patch_level=0x0810100b
[    1.248355] microcode: CPU3: patch_level=0x0810100b
[    1.248358] microcode: CPU4: patch_level=0x0810100b
[    1.248366] microcode: CPU5: patch_level=0x0810100b
[    1.248386] microcode: CPU6: patch_level=0x0810100b
[    1.248394] microcode: CPU7: patch_level=0x0810100b
[    1.248463] microcode: Microcode Update Driver: v2.2.
[    1.248488] sched_clock: Marking stable (931273858, 317184979)->(1387290181, -138831344)
[    1.248807] registered taskstats version 1
[    1.248815] Loading compiled-in X.509 certificates
[    1.252027] Loaded X.509 cert 'Build time autogenerated kernel key: dd5e49d645963e09ce85b14512ff1ec3a5d4712d'
[    1.252068] zswap: loaded using pool lzo/zbud
[    1.257946] Key type big_key registered
[    1.258687] PM:   Magic number: 7:504:749
[    1.258696] tty ttyS0: hash matches
[    1.258825] rtc_cmos 00:01: setting system clock to 2019-06-24T19:42:10 UTC (1561405330)
[    1.456330] nvme nvme0: Shutdown timeout set to 8 seconds
[    1.475830] nvme nvme0: 16/0/0 default/read/poll queues
[    1.485743]  nvme0n1: p1 p2 p3 p4 p5 p6
[    1.487197] PM: Image not found (code -22)
[    1.489098] Freeing unused decrypted memory: 2040K
[    1.489448] Freeing unused kernel image memory: 1564K
[    1.509810] Write protecting the kernel read-only data: 18432k
[    1.511145] Freeing unused kernel image memory: 2016K
[    1.511304] Freeing unused kernel image memory: 332K
[    1.521198] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.521204] Run /init as init process
[    1.659412] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.668647] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.668718] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.668805] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
[    1.676110] xhci_hcd 0000:04:00.3: xHCI Host Controller
[    1.676135] xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 1
[    1.676353] xhci_hcd 0000:04:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
[    1.677388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    1.677389] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.677390] usb usb1: Product: xHCI Host Controller
[    1.677391] usb usb1: Manufacturer: Linux 5.1.12-arch1-1-ARCH xhci-hcd
[    1.677392] usb usb1: SerialNumber: 0000:04:00.3
[    1.677691] hub 1-0:1.0: USB hub found
[    1.677723] hub 1-0:1.0: 4 ports detected
[    1.678965] xhci_hcd 0000:04:00.3: xHCI Host Controller
[    1.678970] xhci_hcd 0000:04:00.3: new USB bus registered, assigned bus number 2
[    1.678975] SCSI subsystem initialized
[    1.678976] xhci_hcd 0000:04:00.3: Host supports USB 3.10 Enhanced SuperSpeed
[    1.679026] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.679059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[    1.679061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.679063] usb usb2: Product: xHCI Host Controller
[    1.679065] usb usb2: Manufacturer: Linux 5.1.12-arch1-1-ARCH xhci-hcd
[    1.679066] usb usb2: SerialNumber: 0000:04:00.3
[    1.679321] hub 2-0:1.0: USB hub found
[    1.679342] hub 2-0:1.0: 4 ports detected
[    1.680758] xhci_hcd 0000:04:00.4: xHCI Host Controller
[    1.680764] xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 3
[    1.681025] xhci_hcd 0000:04:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
[    1.682081] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    1.682084] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.682086] usb usb3: Product: xHCI Host Controller
[    1.682088] usb usb3: Manufacturer: Linux 5.1.12-arch1-1-ARCH xhci-hcd
[    1.682090] usb usb3: SerialNumber: 0000:04:00.4
[    1.682272] hub 3-0:1.0: USB hub found
[    1.682282] hub 3-0:1.0: 2 ports detected
[    1.682953] xhci_hcd 0000:04:00.4: xHCI Host Controller
[    1.682958] xhci_hcd 0000:04:00.4: new USB bus registered, assigned bus number 4
[    1.682963] xhci_hcd 0000:04:00.4: Host supports USB 3.10 Enhanced SuperSpeed
[    1.683005] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.683041] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
[    1.683044] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.683046] usb usb4: Product: xHCI Host Controller
[    1.683048] usb usb4: Manufacturer: Linux 5.1.12-arch1-1-ARCH xhci-hcd
[    1.683050] usb usb4: SerialNumber: 0000:04:00.4
[    1.683214] hub 4-0:1.0: USB hub found
[    1.683228] hub 4-0:1.0: 1 port detected
[    1.690245] libata version 3.00 loaded.
[    1.695140] ahci 0000:05:00.0: version 3.0
[    1.705653] ahci 0000:05:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    1.705655] ahci 0000:05:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part deso sadm sds 
[    1.706080] scsi host0: ahci
[    1.706322] ata1: SATA max UDMA/133 abar m2048@0xfcd00000 port 0xfcd00100 irq 70
[    1.725596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.007859] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[    2.010933] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    2.018101] ata1: SATA link down (SStatus 0 SControl 300)
[    2.075024] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[    2.089356] random: fast init done
[    2.154011] systemd[1]: systemd 242.29-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.157780] usb 3-1: New USB device found, idVendor=04f2, idProduct=b654, bcdDevice= 0.09
[    2.157781] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.157783] usb 3-1: Product: HP IR Camera
[    2.157784] usb 3-1: Manufacturer: SunplusIT Inc
[    2.167597] tsc: Refined TSC clocksource calibration: 1996.241 MHz
[    2.167604] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x398c9e7ced1, max_idle_ns: 881590497691 ns
[    2.167873] clocksource: Switched to clocksource tsc
[    2.171026] systemd[1]: Detected architecture x86-64.
[    2.178695] usb 1-2: New USB device found, idVendor=24ae, idProduct=1100, bcdDevice= 1.10
[    2.178696] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.178698] usb 1-2: Product: Rapoo 2.4G Wireless Device
[    2.178699] usb 1-2: Manufacturer: RAPOO
[    2.179180] systemd[1]: Set hostname to <Envy>.
[    2.179864] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    2.264103] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.266438] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.266606] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.266724] systemd[1]: Reached target Login Prompts.
[    2.266997] systemd[1]: Created slice User and Session Slice.
[    2.267296] systemd[1]: Created slice system-getty.slice.
[    2.278303] vfs_monitor: loading out-of-tree module taints kernel.
[    2.278328] vfs_monitor: module verification failed: signature and/or required key missing - tainting kernel
[    2.278902] mp: /, major: 3, minor: 5
[    2.278903] partition count: 1, comm[289]: systemd-modules, path: /usr/lib/systemd/systemd-modules-load, cmdline: /usr/lib/systemd/systemd-modules-load
[    2.279539] EXT4-fs (nvme0n1p5): re-mounted. Opts: (null)
[    2.296550] random: lvm: uninitialized urandom read (4 bytes read)
[    2.304271] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[    2.304559] random: systemd-random-: uninitialized urandom read (512 bytes read)
[    2.320931] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[    2.367395] register_kretprobes 10 ok
[    2.393627] vboxdrv: Found 8 processor cores
[    2.411383] vboxdrv: TSC mode is Invariant, tentative frequency 1996224638 Hz
[    2.411385] vboxdrv: Successfully loaded version 6.0.8 (interface 0x00290008)
[    2.416272] VBoxPciLinuxInit
[    2.416276] vboxpci: IOMMU found
[    2.419240] VBoxNetAdp: Successfully started.
[    2.423555] VBoxNetFlt: Successfully started.
[    2.464104] usb 3-2: New USB device found, idVendor=0bda, idProduct=b00b, bcdDevice= 1.10
[    2.464106] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.464107] usb 3-2: Product: Bluetooth Radio 
[    2.464108] usb 3-2: Manufacturer: Realtek 
[    2.464109] usb 3-2: SerialNumber: 00e04c000001
[    2.469178] usb 1-4: New USB device found, idVendor=04f2, idProduct=b653, bcdDevice=32.58
[    2.469179] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.469180] usb 1-4: Product: HP Wide Vision HD Camera
[    2.469181] usb 1-4: Manufacturer: Chicony
[    2.570746] audit: type=1130 audit(1561405331.805:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.581652] systemd-journald[296]: Received request to flush runtime journal from PID 1
[    2.595138] audit: type=1130 audit(1561405331.832:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.635607] acpi_cpufreq: overriding BIOS provided _PSD data
[    2.646924] audit: type=1130 audit(1561405331.882:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.677826] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.682181] input: HP Wireless hotkeys as /devices/virtual/input/input6
[    2.685974] hidraw: raw HID events driver (C) Jiri Kosina
[    2.694589] random: crng init done
[    2.735714] battery: ACPI: Battery Slot [BAT0] (battery present)
[    2.736235] ACPI: AC Adapter [ADP1] (on-line)
[    2.739849] snd_pci_acp3x 0000:04:00.5: Invalid ACP audio mode : 1
[    2.766420] i2c_hid i2c-ELAN0732:00: i2c-ELAN0732:00 supply vdd not found, using dummy regulator
[    2.766445] i2c_hid i2c-ELAN0732:00: i2c-ELAN0732:00 supply vddl not found, using dummy regulator
[    2.775222] audit: type=1130 audit(1561405332.012:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.793359] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    2.794432] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    2.794436] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[    2.795102] Adding 8520000k swap on /dev/nvme0n1p6.  Priority:-2 extents:1 across:8520000k SSFS
[    2.809676] hp_accel: laptop model unknown, using default axes configuration
[    2.820350] partition /tmp [0, 43] added, comm[407]: mount
[    2.820727] cryptd: max_cpu_qlen set to 1000
[    2.836877] lis3lv02d: unknown sensor type 0x0
[    2.837776] hp_accel: probe of HPQ6007:00 failed with error -22
[    2.848328] usbcore: registered new interface driver usbhid
[    2.848330] usbhid: USB HID core driver
[    2.862269] audit: type=1130 audit(1561405332.099:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-nvme0n1p2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.877102] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[    2.877280] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[    2.877289] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[    2.887048] media: Linux media interface: v0.10
[    2.900129] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.916053] input: ELAN0732:00 04F3:2627 Touchscreen as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0732:00/0018:04F3:2627.0001/input/input9
[    2.916226] input: ELAN0732:00 04F3:2627 as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0732:00/0018:04F3:2627.0001/input/input10
[    2.916333] input: ELAN0732:00 04F3:2627 as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0732:00/0018:04F3:2627.0001/input/input11
[    2.916597] input: ELAN0732:00 04F3:2627 as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0732:00/0018:04F3:2627.0001/input/input12
[    2.916774] hid-generic 0018:04F3:2627.0001: input,hidraw0: I2C HID v1.00 Device [ELAN0732:00 04F3:2627] on i2c-ELAN0732:00
[    2.917407] input: RAPOO Rapoo 2.4G Wireless Device as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-2/1-2:1.0/0003:24AE:1100.0002/input/input15
[    2.917566] hid-generic 0003:24AE:1100.0002: input,hidraw1: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:04:00.3-2/input0
[    2.918097] hid-generic 0003:24AE:1100.0003: hiddev0,hidraw2: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:04:00.3-2/input1
[    2.927850] tpm_crb MSFT0101:00: can't request region for resource [mem 0x9d06f000-0x9d06ffff]
[    2.928715] tpm_crb: probe of MSFT0101:00 failed with error -16
[    2.934535] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.935615] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.935617] cfg80211: failed to load regulatory.db
[    2.936873] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20190215/dsopcode-198)
[    2.938763] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.940653] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.942717] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20190215/dsopcode-198)
[    2.944749] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.946933] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.949231] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20190215/dsopcode-198)
[    2.951484] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.953644] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.956015] input: HP WMI hotkeys as /devices/virtual/input/input16
[    2.956267] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20190215/dsopcode-198)
[    2.959056] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.962089] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.965313] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D128] at bit offset/length 128/1024 exceeds size of target Buffer (160 bits) (20190215/dsopcode-198)
[    2.968277] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.970825] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_BUFFER_LIMIT) (20190215/psparse-529)
[    2.975191] AVX2 version of gcm_enc/dec engaged.
[    2.975193] AES CTR mode by8 optimization enabled
[    2.982562] fuse init (API version 7.29)
[    2.993889] Bluetooth: Core ver 2.22
[    2.993916] NET: Registered protocol family 31
[    2.993920] Bluetooth: HCI device and connection manager initialized
[    2.993923] Bluetooth: HCI socket layer initialized
[    2.993928] Bluetooth: L2CAP socket layer initialized
[    2.993947] Bluetooth: SCO socket layer initialized
[    2.999074] videodev: Linux video capture interface: v2.00
[    3.001007] mousedev: PS/2 mouse device common for all mice
[    3.011230] acer_wmi: Acer Laptop ACPI-WMI Extras
[    3.079157] Linux agpgart interface v0.103
[    3.099013] partition /boot [3, 2] added, comm[422]: mount
[    3.106925] partition /media [3, 4] added, comm[395]: mount.ntfs
[    3.134314] uvcvideo: Found UVC 1.00 device HP IR Camera (04f2:b654)
[    3.134745] uvcvideo: Failed to query (GET_INFO) UVC control 2 on unit 1: -32 (exp. 1).
[    3.137361] usbcore: registered new interface driver btusb
[    3.138679] audit: type=1130 audit(1561405332.375:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.138681] uvcvideo: Failed to query (GET_INFO) UVC control 4 on unit 1: -32 (exp. 1).
[    3.142139] Bluetooth: hci0: RTL: rtl: examining hci_ver=07 hci_rev=000b lmp_ver=07 lmp_subver=8822

[    3.150406] Bluetooth: hci0: RTL: rom_version status=0 version=2

[    3.150409] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8822b_fw.bin

[    3.150870] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8822b_config.bin

[    3.151020] Bluetooth: hci0: RTL: cfg_sz 14, total sz 20270

[    3.155648] audit: type=1130 audit(1561405332.392:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.158563] audit: type=1127 audit(1561405332.395:9): pid=510 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[    3.162049] uvcvideo 3-1:1.0: Entity type for entity Extension 5 was not initialized!
[    3.162052] uvcvideo 3-1:1.0: Entity type for entity Extension 4 was not initialized!
[    3.162059] uvcvideo 3-1:1.0: Entity type for entity Extension 3 was not initialized!
[    3.162061] uvcvideo 3-1:1.0: Entity type for entity Processing 2 was not initialized!
[    3.162062] uvcvideo 3-1:1.0: Entity type for entity Camera 1 was not initialized!
[    3.162272] input: HP IR Camera: HP IR Camera as /devices/pci0000:00/0000:00:08.1/0000:04:00.4/usb3/3-1/3-1:1.0/input/input17
[    3.165030] audit: type=1130 audit(1561405332.402:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.168582] uvcvideo: Found UVC 1.00 device HP Wide Vision HD Camera (04f2:b653)
[    3.170371] input: ELAN0732:00 04F3:2627 as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0732:00/0018:04F3:2627.0001/input/input18
[    3.170660] input: ELAN0732:00 04F3:2627 as /devices/platform/AMDI0010:00/i2c-0/i2c-ELAN0732:00/0018:04F3:2627.0001/input/input21
[    3.170856] hid-multitouch 0018:04F3:2627.0001: input,hidraw0: I2C HID v1.00 Device [ELAN0732:00 04F3:2627] on i2c-ELAN0732:00
[    3.176721] snd_hda_intel 0000:04:00.1: Handle vga_switcheroo audio client
[    3.190020] r8822be: module is from the staging directory, the quality is unknown, you have been warned.
[    3.197611] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[    3.197614] uvcvideo 1-4:1.0: Entity type for entity Extension 3 was not initialized!
[    3.197616] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[    3.197624] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[    3.197894] input: HP Wide Vision HD Camera: HP Wi as /devices/pci0000:00/0000:00:08.1/0000:04:00.3/usb1/1-4/1-4:1.0/input/input24
[    3.198317] usbcore: registered new interface driver uvcvideo
[    3.198319] USB Video Class driver (1.1.1)
[    3.228829] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:04:00.1/sound/card0/input25
[    3.290452] r8822be 0000:03:00.0: enabling device (0000 -> 0003)
[    3.335454] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC285: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    3.335457] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.335459] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.335461] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    3.335462] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    3.335464] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x19
[    3.335466] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    3.351876] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    3.363871] r8822be: Using firmware rtlwifi/rtl8822befw.bin
[    3.398878] kvm: Nested Virtualization enabled
[    3.398896] kvm: Nested Paging enabled
[    3.398897] SVM: Virtual VMLOAD VMSAVE supported
[    3.398898] SVM: Virtual GIF supported
[    3.410423] MCE: In-kernel MCE decoding enabled.
[    3.420208] EDAC amd64: Node 0: DRAM ECC disabled.
[    3.420212] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    3.421533] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    3.421889] r8822be: rtlwifi: wireless switch is on
[    3.424710] r8822be 0000:03:00.0 wlo1: renamed from wlan0
[    3.590320] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input26
[    3.590489] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:08.1/0000:04:00.6/sound/card1/input27
[    3.615120] psmouse serio1: synaptics: queried max coordinates: x [..5656], y [..4770]
[    3.643593] psmouse serio1: synaptics: queried min coordinates: x [1284..], y [1078..]
[    3.643611] psmouse serio1: synaptics: Your touchpad (PNP: SYN3274 ETD0000 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    3.648289] [drm] amdgpu kernel modesetting enabled.
[    3.648663] Parsing CRAT table with 1 nodes
[    3.648675] Creating topology SYSFS entries
[    3.648716] Topology: Add APU node [0x0:0x0]
[    3.648717] Finished initializing topology
[    3.648798] checking generic (e0000000 1e8000) vs hw (e0000000 10000000)
[    3.648799] fb0: switching to amdgpudrmfb from EFI VGA
[    3.648824] Console: switching to colour dummy device 80x25
[    3.648926] amdgpu 0000:04:00.0: vgaarb: deactivate vga console
[    3.649747] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x103C:0x8496 0xC4).
[    3.661045] [drm] register mmio base: 0xFCC00000
[    3.661046] [drm] register mmio size: 524288
[    3.661074] [drm] add ip block number 0 <soc15_common>
[    3.661075] [drm] add ip block number 1 <gmc_v9_0>
[    3.661076] [drm] add ip block number 2 <vega10_ih>
[    3.661077] [drm] add ip block number 3 <psp>
[    3.661078] [drm] add ip block number 4 <gfx_v9_0>
[    3.661079] [drm] add ip block number 5 <sdma_v4_0>
[    3.661080] [drm] add ip block number 6 <powerplay>
[    3.661082] [drm] add ip block number 7 <dm>
[    3.661083] [drm] add ip block number 8 <vcn_v1_0>
[    3.661627] [drm] VCN decode is enabled in VM mode
[    3.661628] [drm] VCN encode is enabled in VM mode
[    3.661629] [drm] VCN jpeg decode is enabled in VM mode
[    3.696881] psmouse serio1: synaptics: Touchpad model: 1, fw: 10.16, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x500000, board id: 3408, fw id: 2750885
[    3.701002] [drm] BIOS signature incorrect 0 0
[    3.701034] ATOM BIOS: 113-RAVEN-112
[    3.701071] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    3.701083] amdgpu 0000:04:00.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
[    3.701085] amdgpu 0000:04:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[    3.701086] amdgpu 0000:04:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[    3.701096] [drm] Detected VRAM RAM=1024M, BAR=1024M
[    3.701097] [drm] RAM width 128bits DDR4
[    3.701192] [TTM] Zone  kernel: Available graphics memory: 3576632 kiB
[    3.701192] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.701194] [TTM] Initializing pool allocator
[    3.701207] [TTM] Initializing DMA pool allocator
[    3.701261] [drm] amdgpu: 1024M of VRAM memory ready
[    3.701262] [drm] amdgpu: 3072M of GTT memory ready.
[    3.701279] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    3.701692] [drm] PCIE GART of 1024M enabled (table at 0x000000F4001D5000).
[    3.705085] [drm] use_doorbell being set to: [true]
[    3.705783] [drm] Found VCN firmware Version: 1.73 Family ID: 18
[    3.705796] [drm] PSP loading VCN firmware
[    3.726470] [drm] reserve 0x400000 from 0xf400500000 for PSP TMR SIZE
[    3.728786] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    3.943852] [drm] DM_PPLIB: values for F clock
[    3.943854] [drm] DM_PPLIB:	 400000 in kHz
[    3.943855] [drm] DM_PPLIB:	 933000 in kHz
[    3.943856] [drm] DM_PPLIB:	 1067000 in kHz
[    3.943856] [drm] DM_PPLIB:	 1200000 in kHz
[    3.943858] [drm] DM_PPLIB: values for DCF clock
[    3.943859] [drm] DM_PPLIB:	 300000 in kHz
[    3.943859] [drm] DM_PPLIB:	 600000 in kHz
[    3.943860] [drm] DM_PPLIB:	 626000 in kHz
[    3.943860] [drm] DM_PPLIB:	 654000 in kHz
[    3.944188] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:1! type 0 expected 3
[    3.944304] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:2! type 0 expected 3
[    3.951739] [drm] Display Core initialized with v3.2.17!
[    3.958927] [drm] SADs count is: -2, don't need to read it
[    3.960531] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.960532] [drm] Driver supports precise vblank timestamp query.
[    3.975521] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[    3.976959] kfd kfd: Allocated 3969056 bytes on gart
[    3.976981] Topology: Add APU node [0x15dd:0x1002]
[    3.977358] kfd kfd: added device 1002:15dd
[    3.978613] [drm] fb mappable at 0xA0900000
[    3.978614] [drm] vram apper at 0xA0000000
[    3.978614] [drm] size 8294400
[    3.978615] [drm] fb depth is 24
[    3.978615] [drm]    pitch is 7680
[    3.978720] fbcon: amdgpudrmfb (fb0) is primary device
[    3.981686] Console: switching to colour frame buffer device 240x67
[    3.987884] amdgpu 0000:04:00.0: fb0: amdgpudrmfb frame buffer device
[    4.021555] amdgpu 0000:04:00.0: ring gfx uses VM inv eng 0 on hub 0
[    4.021559] amdgpu 0000:04:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    4.021562] amdgpu 0000:04:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    4.021564] amdgpu 0000:04:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    4.021566] amdgpu 0000:04:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    4.021567] amdgpu 0000:04:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    4.021569] amdgpu 0000:04:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    4.021571] amdgpu 0000:04:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    4.021573] amdgpu 0000:04:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    4.021575] amdgpu 0000:04:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    4.021577] amdgpu 0000:04:00.0: ring sdma0 uses VM inv eng 0 on hub 1
[    4.021579] amdgpu 0000:04:00.0: ring vcn_dec uses VM inv eng 1 on hub 1
[    4.021581] amdgpu 0000:04:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1
[    4.021583] amdgpu 0000:04:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1
[    4.021585] amdgpu 0000:04:00.0: ring vcn_jpeg uses VM inv eng 6 on hub 1
[    4.054452] [drm] Initialized amdgpu 3.30.0 20150101 for 0000:04:00.0 on minor 0
[    6.014574] irq 7: nobody cared (try booting with the "irqpoll" option)
[    6.014579] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G         C OE     5.1.12-arch1-1-ARCH #1
[    6.014580] Hardware name: HP HP ENVY x360 Convertible 13-ag0xxx/8496, BIOS F.35 04/02/2019
[    6.014581] Call Trace:
[    6.014583]  <IRQ>
[    6.014589]  dump_stack+0x5c/0x80
[    6.014592]  __report_bad_irq+0x35/0xaa
[    6.014593]  note_interrupt.cold+0xb/0x69
[    6.014596]  handle_irq_event_percpu+0x6f/0x80
[    6.014597]  handle_irq_event+0x37/0x54
[    6.014598]  handle_fasteoi_irq+0xb5/0x160
[    6.014601]  handle_irq+0x1f/0x30
[    6.014603]  do_IRQ+0x63/0x100
[    6.014604]  common_interrupt+0xf/0xf
[    6.014605]  </IRQ>
[    6.014608] RIP: 0010:cpuidle_enter_state+0xc4/0x480
[    6.014609] Code: e8 e1 59 9f ff 80 7c 24 0f 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 93 03 00 00 31 ff e8 93 a1 a5 ff fb 66 0f 1f 44 00 00 <45> 85 e4 0f 88 be 02 00 00 49 63 cc 4c 2b 6c 24 10 48 8d 04 49 48
[    6.014610] RSP: 0018:ffffae7d80db7e88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffda
[    6.014612] RAX: ffff985ed7dc0000 RBX: ffffffff9a6c2a40 RCX: 000000000000001f
[    6.014612] RDX: 0000000000000000 RSI: 00000000401eda0a RDI: 0000000000000000
[    6.014613] RBP: ffff985ed3ba0400 R08: 00000001667efe79 R09: 000000007fffffff
[    6.014613] R10: ffff985ed7de0d84 R11: ffff985ed7de0d64 R12: 0000000000000002
[    6.014614] R13: 00000001667efe79 R14: 0000000000000002 R15: ffff985ed6bddac0
[    6.014616]  ? cpuidle_enter_state+0x9f/0x480
[    6.014618]  do_idle+0x1e7/0x270
[    6.014620]  cpu_startup_entry+0x19/0x20
[    6.014622]  start_secondary+0x180/0x1d0
[    6.014624]  secondary_startup_64+0xa4/0xb0
[    6.014626] handlers:
[    6.014631] [<00000000e6fdfff4>] amd_gpio_irq_handler [pinctrl_amd]
[    6.014632] Disabling IRQ #7
[    6.095075] kauditd_printk_skb: 17 callbacks suppressed
[    6.095076] audit: type=1130 audit(1561405335.332:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@971 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.102852] audit: type=1006 audit(1561405335.339:29): pid=640 uid=0 old-auid=4294967295 auid=971 tty=(none) old-ses=4294967295 ses=1 res=1
[    6.153983] audit: type=1130 audit(1561405335.389:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@971 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    8.430946] audit: type=1131 audit(1561405337.669:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.611281] audit: type=1006 audit(1561405339.849:32): pid=685 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   10.631054] audit: type=1130 audit(1561405339.869:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.636920] audit: type=1006 audit(1561405339.872:34): pid=695 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   10.687099] audit: type=1130 audit(1561405339.922:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   10.719184] audit: type=1112 audit(1561405339.955:36): pid=685 uid=0 auid=1000 ses=2 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=Envy addr=? terminal=/dev/tty1 res=success'
[   11.291718] audit: type=1130 audit(1561405340.529:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.433312] audit: type=1130 audit(1561405340.669:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.549237] wlo1: authenticate with 78:81:02:c6:1c:3e
[   12.616416] wlo1: send auth to 78:81:02:c6:1c:3e (try 1/3)
[   12.619904] wlo1: authenticated
[   12.620935] wlo1: associate with 78:81:02:c6:1c:3e (try 1/3)
[   12.627878] wlo1: RX AssocResp from 78:81:02:c6:1c:3e (capab=0x11 status=30 aid=2)
[   12.627881] wlo1: 78:81:02:c6:1c:3e rejected association temporarily; comeback duration 672203520 TU (1141637 ms)
[   12.636921] audit: type=1130 audit(1561405341.872:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timedated comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.325597] audit: type=1131 audit(1561405343.562:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.707776] audit: type=1130 audit(1561405344.945:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.621021] wlo1: aborting association with 78:81:02:c6:1c:3e by local choice (Reason: 3=DEAUTH_LEAVING)
[   17.831617] wlo1: authenticate with 78:81:02:c6:1c:3c
[   17.868627] wlo1: send auth to 78:81:02:c6:1c:3c (try 1/3)
[   17.870249] wlo1: authenticated
[   17.870923] wlo1: associate with 78:81:02:c6:1c:3c (try 1/3)
[   17.879220] wlo1: RX AssocResp from 78:81:02:c6:1c:3c (capab=0x411 status=0 aid=4)
[   17.879486] wlo1: associated
[   17.931197] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   19.564259] audit: type=1130 audit(1561405348.799:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.854822] audit: type=1131 audit(1561405350.092:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@971 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   20.865247] audit: type=1131 audit(1561405350.102:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@971 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.326200] audit: type=1131 audit(1561405358.562:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.970032] audit: type=1131 audit(1561405362.753:46): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   42.675923] audit: type=1131 audit(1561405371.460:47): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timedated comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   63.310827] TCP: wlo1: Driver has suspect GRO implementation, TCP performance may be compromised.
[  907.109117] audit: type=1130 audit(1561406235.895:48): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  907.109121] audit: type=1131 audit(1561406235.895:49): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 1353.875968] pci_bus 0000:01: Allocating resources
[ 1353.876057] pcieport 0000:00:01.5: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[ 1353.876061] pcieport 0000:00:01.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 1353.876072] pci_bus 0000:02: Allocating resources
[ 1353.876121] pci_bus 0000:03: Allocating resources
[ 1353.876130] pcieport 0000:00:01.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 1353.876146] pcieport 0000:00:01.5: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[ 1353.876153] pcieport 0000:00:01.7: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
[ 1353.876160] pcieport 0000:00:01.5: BAR 13: assigned [io  0x2000-0x2fff]
[ 1463.702558] pci_bus 0000:01: Allocating resources
[ 1463.702653] pci_bus 0000:02: Allocating resources
[ 1463.702703] pci_bus 0000:03: Allocating resources
[ 2161.012918] pci_bus 0000:01: Allocating resources
[ 2161.012936] pci_bus 0000:02: Allocating resources
[ 2161.012986] pci_bus 0000:03: Allocating resources
[ 2447.028904] pci_bus 0000:01: Allocating resources
[ 2447.028981] pci_bus 0000:02: Allocating resources
[ 2447.029030] pci_bus 0000:03: Allocating resources

If you need any other (system-)information please let me know.

loqs · 2019-06-24 22:25:31

Wecome to the arch linux forums geister.
The patch you reference was added in 4.20-rc4 [1]

[1] https://github.com/torvalds/linux/commi … f3da2dfdfa

geister · 2019-06-25 01:22:20

Thanks a lot loqs,

so the good think is i don't have to patch the kernel, because it's already added?
How can i "apply" the Kernel? Sorry if that's a stupid question, but i have no experience with kernels at all... After one hour of research it seems to be complicate to compile a kernel and i didn't get much further than following your link and download a zip file (about 804 MB).
Is there any "beginner friendly" solution or can you give me some useful tips?

jasonwryan · 2019-06-25 01:31:58

loqs wrote:

The patch you reference was added in 4.20-rc4 [1]

geister dmesg wrote:

Linux version 5.1.12-arch1-1-ARCH

geister · 2019-06-25 01:41:46

So I have the patch automatically because I already have the latest kernel? What can then help to get the touchscreen running?

jasonwryan · 2019-06-25 01:47:58

See https://wiki.archlinux.org/index.php/Touchscreen

loqs · 2019-06-25 03:07:46

https://wiki.archlinux.org/index.php/HP … _13z-ag000 might also be relevant.

schard · 2019-06-25 07:42:14

Funny, enough, I also had initial problems with my HP ENVY x360 13-ag0005ng regarding the touch screen.
An EFI update and a boot into Windows (sic!) fixed it.
Back then I found this proposed solution here: https://github.com/linuxwacom/wacom-hid … -455184732

geister · 2019-06-27 18:52:49

Hey everyone, thanks for helping me!

It seems the first BIOS Update my Laptop automatically did wasn't successful. Or is it possible to "delete" it by

dd if=/dev/zero of=dev/sda

before installing arch? I thought it's not... Anyway, when i checked the bios version it was something from 2009, the newest version of HP is from April 2019! And after a bios update the touchscreen worked very well!
So the newest kernel supports the AMD based HP Envy if the latest bios is installed, that's great so far.

But after i booted into windows the touchscreen no longer works - so i checked the Link above. But booting into Linux with legacy enabled, then booting again legacy disabled, doesn't work for me. So for the moment my touchscreen is still not working...

schard wrote:

An EFI update and a boot into Windows (sic!) fixed it.

Bios update means EFI update, so i already did this, right?

Last edited by geister (2019-06-27 23:41:58)

schard · 2019-06-28 08:09:50

geister wrote:

schard wrote:
An EFI update and a boot into Windows (sic!) fixed it.
Bios update means EFI update, so i already did this, right?

Yes. Try booting back and forth between Linux in UEFI and BIOS mode. It'll work eventually.
I could not yet figure out what exactly causes it to break and work again, but in my case the touch screen worked eventually.

geister · 2019-06-30 14:48:36

schard wrote:

Yes. Try booting back and forth between Linux in UEFI and BIOS mode.

Unfortunately that doen't work for me.. I make the settings in the bios before booting, is there anything else I have to adjust?

Last edited by geister (2019-06-30 15:28:06)

schard · 2019-07-01 09:45:38

Since you have a slightly different model, ymmv.
If it does not work at all, you might want to consider asking HP support.
Does the touch screen still work in Windows?

Last edited by schard (2019-07-01 09:45:54)

geister · 2019-07-07 20:45:58

Hey schard, the touchscreen is working now! In Windows and in Linux. After a Windowsboot the touchscreen stops working in Linux and changing Bios settings shows no effect. But to disconnect the Laptop from the power supply and keeping the powerbutton pressed until the laptops turns off is working for me! I don't know why i have to unplug it, it tooks me days to figure it out..
So the problem is finaly solved!

But one last question, do you think the problem will be solved permanently with a future kernel- or biosupdate?

Thank you guys for helping me!

Arch Linux

#1 2019-06-24 20:44:58

HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#2 2019-06-24 22:25:31

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#3 2019-06-25 01:22:20

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#4 2019-06-25 01:31:58

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#5 2019-06-25 01:41:46

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#6 2019-06-25 01:47:58

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#7 2019-06-25 03:07:46

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#8 2019-06-25 07:42:14

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#9 2019-06-27 18:52:49

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#10 2019-06-28 08:09:50

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#11 2019-06-30 14:48:36

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#12 2019-07-01 09:45:38

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

#13 2019-07-07 20:45:58

Re: HP Envy x360 13-ag0700ng Touchscreen not working, can't install patch

Board footer