You are not logged in.

Pages: 1

#1 2009-05-11 15:20:43

JonathanArcher
Member
From: San Francisco
Registered: 2008-11-12
Posts: 108

[Solved] KDEmod 4.2.3, Xserver/KDM crashes right after start

Hey, I already described my problem in a different topic, but since there was no one actually having that same problem I thought I rather open my own topic here.

Since I updated KDEmod to 4.2.3, I can't login anymore. I see the Xserver starting and have these weird "graphic bug" lines as usual, but then it just hangs there instead of loading KDM. After a few tests I found out, that deleting the xorg.conf solves the problem and I can login again as usual. The problem for me is that I need the xorg.conf because of my Wacom tablet and also because I want to disable the tapping of my touchpad. Maybe that can be done outside of xorg.conf, but at least the Wacom part can't (as far as I know).

So, I'll just post my xorg.conf and the log of /var/log/Xorg.0.log, if you need anything else, tell me.

xorg.conf

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "screen" 0 0
    InputDevice "Mouse" "CorePointer"
    InputDevice "Keyboard" "CoreKeyboard"
    InputDevice "Touchpad" "SendCoreEvents"
    InputDevice "cursor" "SendCoreEvents"
    InputDevice "stylus" "SendCoreEvents"
    InputDevice "eraser" "SendCoreEvents"
EndSection

Section "ServerFlags"
    Option "AutoAddDevices" "False"
    Option "DontZap"    "false"
EndSection

Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
EndSection

Section "Module"
    Load "xtrap"
    Load "dri"
    Load "GLcore"
    Load "record"
    Load "extmod"
    Load "glx"
    Load "drm"
    Load "dbe"
    Load "freetype"
    Load "synaptics"
EndSection

Section "InputDevice"
    Identifier "Keyboard"
    Driver "kbd"
    Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
    Identifier "Mouse"
    Driver "mouse"
    Option "SendCoreEvents" "true"
    Option "Device" "/dev/input/mice"
    #Option "Device" "/dev/input/mouse_udev"
    Option "Protocol" "ImPS/2"
    Option "Emulate3Buttons" "true"
    Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    Identifier "Touchpad"
    Driver "synaptics"
    Option "Device" "/dev/input/mouse2"
    Option "Protocol" "auto-dev"
    Option "LeftEdge" "1700"
    Option "RightEdge" "5300"
    Option "TopEdge" "1700"
    Option "BottomEdge" "4200"
    Option "FingerLow" "25"
    Option "FingerHigh" "30"
    Option "MaxTapTime" "0"
    Option "MaxTapMove" "0"
    Option "VertScrollDelta" "100"
    Option "MinSpeed" "0.06"
    Option "MaxSpeed" "0.12"
    Option "AccelFactor" "0.0010"
    Option "SHMConfig" "on"
EndSection

Section "InputDevice"
    Identifier "stylus"
    Driver "wacom"
    Option "Mode" "Absolute"
    Option "Device" "/dev/input/wacom"
    Option "Type" "stylus"
    Option "USB" "on"
    Option "Vendor" "WACOM"
    Option "Threshold" "5" #the official linuxwacom howto advises this line
    Option "KeepShape" "on"
EndSection

Section "InputDevice"
    Identifier "eraser"
    Driver "wacom"
    #Option "Mode" "Relative" #other option:"Absolute"
    Option "Device" "/dev/input/wacom"
    Option "Type" "eraser"
    Option "USB" "on"
    Option "Vendor" "WACOM"
        Option "Threshold" "5" #the official linuxwacom howto advises this line
    Option "KeepShape" "on"
EndSection

Section "InputDevice"
    Identifier "cursor"
    Driver "wacom"
    #Option "Mode" "Relative" #other option:"Absolute"
    Option "Device" "/dev/input/wacom"
    Option "Type" "cursor"
    Option "USB" "on"
    Option "Vendor" "WACOM"
EndSection

Section "Monitor"
    Identifier "monitor"
    VendorName "LPL"
    ModelName "0"
    DisplaySize 336 210 # 96 DPI, 1280x800 (non 4:3 aspect)
EndSection

Section "Device"
    Identifier "ati"
    Driver "radeon"
    VendorName "ATI Technologies Inc"
    BoardName "Radeon Mobility X700 (PCIE)"
    Option "UseEdidDPI" "false"
    Option "DPI" "96 x 96"
    Option "NoDDC" "true"
    BusID "PCI:1:0:0"
    Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
    Option "ColorTiling" "on"
    Option "AGPMode" "4"
    Option "AccelMethod" "EXA"
    Option "EnablePageFlip" "on"
    Option "AGPFastWrite" "yes"
EndSection

Section "Screen"
    Identifier "screen"
    Device "ati"
    Monitor "monitor"
        SubSection "Display"
            Viewport 0 0
            Depth 24
        EndSubSection
EndSection

Section "DRI"
    Group "video"
    Mode 0666
EndSection

Xorg.0.log

X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686 
Current Operating System: Linux rodriguez 2.6.29-ARCH #1 SMP PREEMPT Sat May 9 12:47:43 UTC 2009 i686
Build Date: 15 April 2009  11:09:10AM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 11 17:05:42 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "screen" (0)
(**) |   |-->Monitor "monitor"
(**) |   |-->Device "ati"
(**) |-->Input Device "Mouse"
(**) |-->Input Device "Keyboard"
(**) |-->Input Device "Touchpad"
(**) |-->Input Device "cursor"
(**) |-->Input Device "stylus"
(**) |-->Input Device "eraser"
(**) Option "DontZap" "false"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x1a40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0x90000000/134217728, 0xc0000000/65536, I/O @ 0x0000c000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) Wacom driver level: 47-0.8.3-2 $
(II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD Graphics, ATI Radeon Graphics,
    ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
    ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c0000000
(II) RADEON(0): MMIO registers at 0x00000000c0000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "AGPFastWrite" "yes"
(**) RADEON(0): Option "EnablePageFlip" "on"
(**) RADEON(0): Option "ColorTiling" "on"
(**) RADEON(0): Option "AccelMethod" "EXA"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X700 (M26) (PCIE)" (ChipID = 0x5653)
(--) RADEON(0): Linear framebuffer at 0x0000000090000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom: 
    SubsystemVendorID: 0x1179 SubsystemID: 0xff10
    IOBaseAddress: 0xc000
    Filename:             
    BIOS Bootup Message: 
Req14228-Aeric lin Rel9.10.1.0/CL197152                                     

(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 350000
(II) RADEON(0): Default Memory Clock: 283000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 500000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 200000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(**) RADEON(0): Page Flipping enabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 50000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 350.000000, mclk: 283.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=7 min=20000 max=50000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71250
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): TMDS PLL from BIOS: 16500 b0112
encoder: 0x4
encoder: 0x1
encoder: 0x2
(II) RADEON(0): Output VGA-0 using monitor section monitor
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_DAC1
  DDC reg: 0x60
(II) RADEON(0): Port1:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_LVDS
  DDC reg: 0x68
(II) RADEON(0): Port2:
  XRANDR name: DVI-0
  Connector: DVI-I
  DFP1: INTERNAL_TMDS1
  DDC reg: 0x64
Atom Get EDID success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(**) RADEON(0): Option "NoDDC" "true"
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
Atom Get EDID success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
(II) RADEON(0): Query for AtomBIOS Get Panel EDID: failed
(II) RADEON(0): Added native panel mode: 1280x800
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Unhandled monitor type 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (336, 210) mm
(**) RADEON(0): DPI set to (96, 145)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(**) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): MM_TABLE: d0-f7-c6-02-00-74-08-80-e6-4c-c0-e6-02-0a
(II) RADEON(0): This card has MM_TABLE we do not recognize.
        If your card is TV-in capable you will need to specify options RageTheatreCrystal, RageTheatreTunerPort, 
        RageTheatreSVideoPort and TunerType in /etc/X11/xorg.conf.
(!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit 90000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x97ff9000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 131040 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x005dc000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x005e0000
(II) RADEON(0): Will use 6000 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 32 kb for PCI GART at offset 0x07ff8000
(II) RADEON(0): Will use 6000 kb for back buffer at offset 0x005e4000
(II) RADEON(0): Will use 6000 kb for depth buffer at offset 0x00bc0000
(II) RADEON(0): Will use 56320 kb for textures at offset 0x0119c000
(II) RADEON(0): Will use 56688 kb for X Server offscreen at offset 0x0489c000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0x90000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf86e6000
(II) RADEON(0): [pci] ring handle = 0xf86e6000
(II) RADEON(0): [pci] Ring mapped at 0xb793f000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf87e7000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb793e000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf87e8000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xaf6a2000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf89e8000
(II) RADEON(0): [pci] GART Texture map mapped at 0xada22000
(II) RADEON(0): [drm] register handle = 0x28000000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x97ff9000 0x97ff9000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x97ff9000 is: 0x97ff9000
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x97ff9000 0x97ff9000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
(II) RADEON(0): Setting EXA maxPitchBytes
(II) RADEON(0): num quad-pipes is 2
(II) EXA(0): Offscreen pixmap area of 58048512 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(II)         UploadToScreen
(II)         DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable primary dac
disable LVDS
disable LVDS
init memmap
init common
init crtc1
init pll1
freq: 71250000
best_freq: 71357143
best_feedback_div: 74
best_ref_div: 7
best_post_div: 4
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x97ff9000 0x97ff9000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable primary dac
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) RADEON(0): Option "UseEdidDPI" is not used
(WW) RADEON(0): Option "DPI" is not used
(WW) RADEON(0): Option "XAANoOffscreenPixmaps" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(**) Option "Protocol" "ImPS/2"
(**) Mouse: Device: "/dev/input/mice"
(**) Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse: ZAxisMapping: buttons 4 and 5
(**) Mouse: Buttons: 9
(**) Mouse: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse" (type: MOUSE)
(**) Mouse: (accel) keeping acceleration scheme 1
(**) Mouse: (accel) filter chain progression: 2.00
(**) Mouse: (accel) filter stage 0: 20.00 ms
(**) Mouse: (accel) set acceleration profile 0
(II) Mouse: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "de"
(**) Keyboard: XkbLayout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) Keyboard: XkbVariant: "nodeadkeys"
(**) Option "CustomKeycodes" "off"
(**) Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard" (type: KEYBOARD)
(II) Synaptics touchpad driver version 1.1.0
(--) Touchpad auto-dev sets device to /dev/input/event5
(**) Option "Device" "/dev/input/event5"
(II) Touchpad: x-axis range 1472 - 5472
(II) Touchpad: y-axis range 1408 - 4448
(II) Touchpad: pressure range 0 - 255
(II) Touchpad: finger width range 0 - 0
(II) Touchpad: buttons: left right middle double triple
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "0"
(**) Option "MaxTapMove" "0"
(**) Option "VertScrollDelta" "100"
(**) Option "MinSpeed" "0.06"
(**) Option "MaxSpeed" "0.12"
(**) Option "AccelFactor" "0.0010"
(--) Touchpad touchpad found
(**) Option "SendCoreEvents"
(**) Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Touchpad" (type: TOUCHPAD)
(**) Touchpad: (accel) keeping acceleration scheme 1
(**) Touchpad: (accel) filter chain progression: 2.00
(**) Touchpad: (accel) filter stage 0: 20.00 ms
(**) Touchpad: (accel) set acceleration profile 0
(--) Touchpad touchpad found
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/input/wacom
(**) cursor is in relative mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) cursor: reading USB link
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(II) UnloadModule: "wacom"
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/input/wacom
(**) stylus is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) stylus: reading USB link
(**) Option "KeepShape" "on"
(**) stylus: keeps shape
(**) Option "Threshold" "5"
(**) stylus: threshold = 5
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(II) UnloadModule: "wacom"
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/input/wacom
(**) eraser is in absolute mode
(**) WACOM: suppress value is 2
(**) Option "USB" "on"
(**) eraser: reading USB link
(**) Option "KeepShape" "on"
(**) eraser: keeps shape
(**) Option "Threshold" "5"
(**) eraser: threshold = 5
(**) Option "BaudRate" "9600"
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(**) Option "Device" "/dev/input/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
    No such file or directory.
Error opening /dev/input/wacom : No such file or directory
(II) UnloadModule: "wacom"

Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813278b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80dda61]
2: [0xb80a1400]
3: /usr/bin/X(ActivateDevice+0x4f) [0x808504f]
4: /usr/bin/X(InitAndStartDevices+0x42) [0x8085e42]
5: /usr/bin/X(main+0x36f) [0x8071eef]
6: /lib/libc.so.6(__libc_start_main+0xe6) [0xb7c5d6b6]
7: /usr/bin/X [0x8071401]

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) UnloadModule: "synaptics"

I already looked up the "signal 11" error message but didn't find anything helpfull. And I tried to make a "minimal" xorg.conf with only the touchpad and the Wacom properties, but then the Xserver complained that there is no screen set. So if someone could help me minimize the xorg.conf, that would maybe be enough if there are no other solutions.

Last edited by JonathanArcher (2009-05-13 15:40:14)

Offline

#2 2009-05-12 10:35:24

JonathanArcher
Member
From: San Francisco
Registered: 2008-11-12
Posts: 108

Re: [Solved] KDEmod 4.2.3, Xserver/KDM crashes right after start

Ok, I have no idea why, but the Wacom tablet gets recognized properly (it seems) by X. Still there are two problems I'd like to solve, one being the fact that I have a 16:10 monitor, but the tablet is 4:3. With xorg.conf I could set it right (Option Keepshape), but how can I do that without the conf file? Also, how can I disable touchpad tapping without the xorg.conf?

Offline

#3 2009-05-13 15:39:47

JonathanArcher
Member
From: San Francisco
Registered: 2008-11-12
Posts: 108

Re: [Solved] KDEmod 4.2.3, Xserver/KDM crashes right after start

Solved the problem myself. I generated a sample xorg.conf with hwd and since that worked (expect for the monitor settings) I just compared the hwd-generated config file with my old one and commented out/added stuff if necessary. I did not test which option it was and since no one else seems to have this problem I won't write them down here.

Offline

Pages: 1

Board footer

Powered by FluxBB