You are not logged in.
It works when I mount manually but does not work when I try using Dolphin filemanger. I already have hal & fam daemons running. and Whenever I plug the disk, I do get popup like this:
Upon clicking on it, I get Empty Drive. but in actuall the drive it not empty. its contents do show up when, I mount it via command line.
This is not just for this drive, but for all CD/Flash/USB hdds. none of them work, unless I mount it manually.
any idea what going wrong?
Offline
Here is the relavent log from dmesg.
Jul 19 14:26:16 moody kernel: usb 1-3: configuration #1 chosen from 1 choice
Jul 19 14:26:16 moody kernel: scsi3 : SCSI emulation for USB Mass Storage devices
Jul 19 14:26:21 moody kernel: scsi 3:0:0:0: Direct-Access Generic External 1.02 PQ: 0 ANSI: 4
Jul 19 14:26:21 moody kernel: sd 3:0:0:0: Attached scsi generic sg1 type 0
Jul 19 14:26:21 moody kernel: sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
Jul 19 14:26:21 moody kernel: sd 3:0:0:0: [sdb] Write Protect is off
Jul 19 14:26:21 moody kernel: sdb: sdb1
Jul 19 14:26:21 moody kernel: sd 3:0:0:0: [sdb] Attached SCSI disk
Jul 19 14:29:12 moody ntfs-3g[6210]: Version 2009.4.4 integrated FUSE 27
Jul 19 14:29:12 moody ntfs-3g[6210]: Mounted /dev/sdb1 (Read-Write, label "New Volume", NTFS 3.1)
Jul 19 14:29:12 moody ntfs-3g[6210]: Cmdline options: rw,noexec,nosuid,nodev,users
Jul 19 14:29:12 moody ntfs-3g[6210]: Mount options: rw,noexec,nosuid,nodev,users,silent,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096
Offline
What does it mean 'can't work' ?
Because we can see here:
Mounted /dev/sdb1 (Read-Write, label "New Volume", NTFS 3.1)
and
Mount options: rw,noexec,nosuid,nodev,users,silent,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096
So according this log is okay.
Offline