You are not logged in.

#1 2015-11-24 06:55:45

Nono3167
Member
Registered: 2015-11-23
Posts: 3

Xorg not starting after upgrade

Hello,

Last sunday, I made a big upgrade of packages on my Arch Linux.
The next day, I wasn't able to get SDDM to launch.

I tried to install lightdm instead but I ended up with the same symptom : the list of services appear to be fine but after a while, nothing happens.
Instead of seeing the display manager, I am stuck with the list of services that started.

Usually, I have SDDM that starts and allow me to log into my KDE session.

Here is my X.0.log :

[    15.421] 
X.Org X Server 1.18.0
Release Date: 2015-11-09
[    15.421] X Protocol Version 11, Revision 0
[    15.421] Build Operating System: Linux 4.2.3-1-ARCH x86_64 
[    15.421] Current Operating System: Linux dell-l502x-arch 4.1.13-1-lts #1 SMP Tue Nov 10 09:48:15 CET 2015 x86_64
[    15.421] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=26270399-b7cc-468a-b151-4fb1cb819eb1 rw quiet
[    15.421] Build Date: 18 November 2015  08:07:09AM
[    15.421]  
[    15.421] Current version of pixman: 0.32.8
[    15.421] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.421] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.421] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 24 07:38:49 2015
[    15.426] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    15.426] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.428] (==) No Layout section.  Using the first Screen section.
[    15.428] (==) No screen section available. Using defaults.
[    15.428] (**) |-->Screen "Default Screen Section" (0)
[    15.428] (**) |   |-->Monitor "<default monitor>"
[    15.428] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    15.428] (==) Automatically adding devices
[    15.428] (==) Automatically enabling devices
[    15.428] (==) Automatically adding GPU devices
[    15.428] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    15.434] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    15.434] 	Entry deleted from font path.
[    15.434] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    15.434] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    15.434] 	Entry deleted from font path.
[    15.434] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    15.434] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    15.434] (==) ModulePath set to "/usr/lib/xorg/modules"
[    15.434] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    15.434] (II) Loader magic: 0x819d40
[    15.434] (II) Module ABI versions:
[    15.434] 	X.Org ANSI C Emulation: 0.4
[    15.434] 	X.Org Video Driver: 20.0
[    15.434] 	X.Org XInput driver : 22.1
[    15.434] 	X.Org Server Extension : 9.0
[    15.435] (++) using VT number 1

[    15.435] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    15.436] (II) xfree86: Adding drm device (/dev/dri/card1)
[    15.436] (II) xfree86: Adding drm device (/dev/dri/card0)
[    15.439] (--) PCI:*(0:0:2:0) 8086:0116:1028:050e rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[    15.439] (--) PCI: (0:1:0:0) 10de:0df4:1028:050e rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[    15.439] (II) Open ACPI successful (/var/run/acpid.socket)
[    15.439] (II) LoadModule: "glx"
[    15.443] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    15.510] (II) Module glx: vendor="NVIDIA Corporation"
[    15.510] 	compiled for 4.0.2, module version = 1.0.0
[    15.510] 	Module class: X.Org Server Extension
[    15.511] (II) NVIDIA GLX Module  358.16  Mon Nov 16 18:54:01 PST 2015
[    15.511] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    15.511] 	loading driver: nvidia
[    15.511] (==) Matched intel as autoconfigured driver 0
[    15.511] (==) Matched nvidia as autoconfigured driver 1
[    15.511] (==) Matched nouveau as autoconfigured driver 2
[    15.511] (==) Matched nv as autoconfigured driver 3
[    15.511] (==) Matched intel as autoconfigured driver 4
[    15.511] (==) Matched modesetting as autoconfigured driver 5
[    15.511] (==) Matched fbdev as autoconfigured driver 6
[    15.511] (==) Matched vesa as autoconfigured driver 7
[    15.511] (==) Assigned the driver to the xf86ConfigLayout
[    15.511] (II) LoadModule: "intel"
[    15.512] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    15.515] (II) Module intel: vendor="X.Org Foundation"
[    15.515] 	compiled for 1.18.0, module version = 2.99.917
[    15.515] 	Module class: X.Org Video Driver
[    15.515] 	ABI class: X.Org Video Driver, version 20.0
[    15.515] (II) LoadModule: "nvidia"
[    15.515] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    15.522] (II) Module nvidia: vendor="NVIDIA Corporation"
[    15.522] 	compiled for 4.0.2, module version = 1.0.0
[    15.522] 	Module class: X.Org Video Driver
[    15.523] (II) LoadModule: "nouveau"
[    15.523] (WW) Warning, couldn't open module nouveau
[    15.523] (II) UnloadModule: "nouveau"
[    15.523] (II) Unloading nouveau
[    15.523] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    15.523] (II) LoadModule: "nv"
[    15.523] (WW) Warning, couldn't open module nv
[    15.523] (II) UnloadModule: "nv"
[    15.523] (II) Unloading nv
[    15.523] (EE) Failed to load module "nv" (module does not exist, 0)
[    15.523] (II) LoadModule: "modesetting"
[    15.524] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    15.524] (II) Module modesetting: vendor="X.Org Foundation"
[    15.524] 	compiled for 1.18.0, module version = 1.18.0
[    15.524] 	Module class: X.Org Video Driver
[    15.524] 	ABI class: X.Org Video Driver, version 20.0
[    15.524] (II) LoadModule: "fbdev"
[    15.525] (WW) Warning, couldn't open module fbdev
[    15.525] (II) UnloadModule: "fbdev"
[    15.525] (II) Unloading fbdev
[    15.525] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    15.525] (II) LoadModule: "vesa"
[    15.525] (WW) Warning, couldn't open module vesa
[    15.525] (II) UnloadModule: "vesa"
[    15.525] (II) Unloading vesa
[    15.525] (EE) Failed to load module "vesa" (module does not exist, 0)
[    15.525] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    15.525] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    15.525] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    15.525] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    15.525] (II) NVIDIA dlloader X Driver  358.16  Mon Nov 16 18:32:40 PST 2015
[    15.525] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    15.526] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    15.527] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
[    15.527] (II) intel(0): SNA compiled from 2.99.917-478-gdf72bc5
[    15.528] (WW) Falling back to old probe method for modesetting
[    15.529] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[    15.529] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[    15.529] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    15.529] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    15.529] (==) intel(0): RGB weight 888
[    15.529] (==) intel(0): Default visual is TrueColor
[    15.529] (II) intel(0): Output LVDS1 has no monitor section
[    15.529] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
[    15.530] (II) intel(0): Enabled output LVDS1
[    15.530] (II) intel(0): Output VGA1 has no monitor section
[    15.530] (II) intel(0): Enabled output VGA1
[    15.530] (II) intel(0): Output HDMI1 has no monitor section
[    15.530] (II) intel(0): Enabled output HDMI1
[    15.530] (II) intel(0): Output DP1 has no monitor section
[    15.530] (II) intel(0): Enabled output DP1
[    15.530] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    15.530] (II) intel(0): Output VIRTUAL1 has no monitor section
[    15.530] (II) intel(0): Enabled output VIRTUAL1
[    15.530] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[    15.530] (==) intel(0): TearFree disabled
[    15.530] (==) intel(0): DPI set to (96, 96)
[    15.530] (II) Loading sub module "dri2"
[    15.530] (II) LoadModule: "dri2"
[    15.530] (II) Module "dri2" already built-in
[    15.530] (II) Loading sub module "present"
[    15.530] (II) LoadModule: "present"
[    15.530] (II) Module "present" already built-in
[    15.640] (II) UnloadModule: "nvidia"
[    15.640] (II) Unloading nvidia
[    15.640] (==) Depth 24 pixmap format is 32 bpp
[    15.644] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[    15.644] (==) intel(0): Backing store enabled
[    15.644] (==) intel(0): Silken mouse enabled
[    15.645] (II) intel(0): HW Cursor enabled
[    15.645] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    15.646] (==) intel(0): DPMS enabled
[    15.646] (==) intel(0): Display hotplug detection enabled
[    15.646] (II) intel(0): [DRI2] Setup complete
[    15.646] (II) intel(0): [DRI2]   DRI driver: i965
[    15.646] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    15.646] (II) intel(0): direct rendering: DRI2 enabled
[    15.646] (II) intel(0): hardware support for Present enabled
[    15.646] (--) RandR disabled
[    15.656] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    15.660] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    15.660] (II) intel(0): Setting screen physical size to 361 x 203
[    15.809] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    15.809] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.809] (**) Power Button: Applying InputClass "system-keyboard"
[    15.809] (II) LoadModule: "evdev"
[    15.810] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    15.813] (II) Module evdev: vendor="X.Org Foundation"
[    15.813] 	compiled for 1.18.0, module version = 2.10.0
[    15.813] 	Module class: X.Org XInput Driver
[    15.813] 	ABI class: X.Org XInput driver, version 22.1
[    15.813] (II) Using input driver 'evdev' for 'Power Button'
[    15.813] (**) Power Button: always reports core events
[    15.813] (**) evdev: Power Button: Device: "/dev/input/event4"
[    15.813] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.813] (--) evdev: Power Button: Found keys
[    15.813] (II) evdev: Power Button: Configuring as keyboard
[    15.813] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[    15.813] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    15.813] (**) Option "xkb_rules" "evdev"
[    15.813] (**) Option "xkb_layout" "fr"
[    15.858] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
[    15.858] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    15.858] (**) Video Bus: Applying InputClass "system-keyboard"
[    15.858] (II) Using input driver 'evdev' for 'Video Bus'
[    15.858] (**) Video Bus: always reports core events
[    15.858] (**) evdev: Video Bus: Device: "/dev/input/event12"
[    15.858] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    15.858] (--) evdev: Video Bus: Found keys
[    15.858] (II) evdev: Video Bus: Configuring as keyboard
[    15.858] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14/event12"
[    15.858] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    15.858] (**) Option "xkb_rules" "evdev"
[    15.858] (**) Option "xkb_layout" "fr"
[    15.859] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    15.859] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    15.859] (**) Video Bus: Applying InputClass "system-keyboard"
[    15.859] (II) Using input driver 'evdev' for 'Video Bus'
[    15.859] (**) Video Bus: always reports core events
[    15.859] (**) evdev: Video Bus: Device: "/dev/input/event11"
[    15.859] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    15.859] (--) evdev: Video Bus: Found keys
[    15.859] (II) evdev: Video Bus: Configuring as keyboard
[    15.859] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input13/event11"
[    15.859] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    15.859] (**) Option "xkb_rules" "evdev"
[    15.859] (**) Option "xkb_layout" "fr"
[    15.861] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    15.861] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    15.861] (**) Power Button: Applying InputClass "system-keyboard"
[    15.861] (II) Using input driver 'evdev' for 'Power Button'
[    15.861] (**) Power Button: always reports core events
[    15.861] (**) evdev: Power Button: Device: "/dev/input/event1"
[    15.861] (--) evdev: Power Button: Vendor 0 Product 0x1
[    15.861] (--) evdev: Power Button: Found keys
[    15.861] (II) evdev: Power Button: Configuring as keyboard
[    15.861] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[    15.861] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    15.861] (**) Option "xkb_rules" "evdev"
[    15.861] (**) Option "xkb_layout" "fr"
[    15.862] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    15.862] (II) No input driver specified, ignoring this device.
[    15.862] (II) This device may have been added with another device file.
[    15.862] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    15.862] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    15.862] (**) Sleep Button: Applying InputClass "system-keyboard"
[    15.862] (II) Using input driver 'evdev' for 'Sleep Button'
[    15.862] (**) Sleep Button: always reports core events
[    15.862] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    15.863] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    15.863] (--) evdev: Sleep Button: Found keys
[    15.863] (II) evdev: Sleep Button: Configuring as keyboard
[    15.863] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[    15.863] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    15.863] (**) Option "xkb_rules" "evdev"
[    15.863] (**) Option "xkb_layout" "fr"
[    15.864] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event15)
[    15.865] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[    15.865] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "system-keyboard"
[    15.865] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[    15.865] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[    15.865] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event15"
[    15.865] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x408 Product 0x2fb1
[    15.865] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
[    15.865] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[    15.865] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input16/event15"
[    15.865] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[    15.865] (**) Option "xkb_rules" "evdev"
[    15.865] (**) Option "xkb_layout" "fr"
[    15.866] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[    15.866] (II) No input driver specified, ignoring this device.
[    15.866] (II) This device may have been added with another device file.
[    15.866] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[    15.866] (II) No input driver specified, ignoring this device.
[    15.866] (II) This device may have been added with another device file.
[    15.867] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[    15.867] (II) No input driver specified, ignoring this device.
[    15.867] (II) This device may have been added with another device file.
[    15.867] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    15.867] (II) No input driver specified, ignoring this device.
[    15.867] (II) This device may have been added with another device file.
[    15.868] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[    15.868] (II) No input driver specified, ignoring this device.
[    15.868] (II) This device may have been added with another device file.
[    15.868] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    15.868] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    15.868] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    15.868] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    15.868] (**) AT Translated Set 2 keyboard: always reports core events
[    15.868] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    15.868] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    15.868] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    15.868] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    15.868] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    15.868] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    15.868] (**) Option "xkb_rules" "evdev"
[    15.868] (**) Option "xkb_layout" "fr"
[    15.869] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[    15.869] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    15.869] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    15.869] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    15.869] (II) LoadModule: "synaptics"
[    15.870] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    15.871] (II) Module synaptics: vendor="X.Org Foundation"
[    15.871] 	compiled for 1.18.0, module version = 1.8.3
[    15.871] 	Module class: X.Org XInput Driver
[    15.871] 	ABI class: X.Org XInput driver, version 22.1
[    15.871] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    15.871] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    15.871] (**) Option "Device" "/dev/input/event14"
[    16.040] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[    16.040] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5398 (res 42)
[    16.040] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728 (res 70)
[    16.040] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    16.040] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    16.040] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    16.040] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    16.040] (**) Option "TapButton1" "1"
[    16.040] (**) Option "TapButton2" "2"
[    16.040] (**) Option "TapButton3" "3"
[    16.040] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    16.040] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    16.100] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event14"
[    16.100] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    16.100] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    16.100] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    16.100] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039
[    16.101] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    16.101] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    16.101] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    16.101] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    16.101] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    16.102] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    16.102] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    16.103] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    16.103] (II) No input driver specified, ignoring this device.
[    16.103] (II) This device may have been added with another device file.
[    16.104] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event13)
[    16.104] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    16.104] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[    16.104] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[    16.104] (**) Dell WMI hotkeys: always reports core events
[    16.104] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event13"
[    16.104] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[    16.104] (--) evdev: Dell WMI hotkeys: Found keys
[    16.104] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[    16.104] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event13"
[    16.104] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[    16.104] (**) Option "xkb_rules" "evdev"
[    16.104] (**) Option "xkb_layout" "fr"
[    17.531] (II) intel(0): EDID vendor "SEC", prod id 21569
[    17.531] (II) intel(0): Printing DDC gathered Modelines:
[    17.531] (II) intel(0): Modeline "1366x768"x0.0   71.56  1366 1414 1446 1510  768 770 775 789 +hsync -vsync (47.4 kHz eP)
[    58.503] (II) Open ACPI successful (/var/run/acpid.socket)
[    58.503] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    58.550] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   178.330] (II) evdev: Dell WMI hotkeys: Close
[   178.330] (II) UnloadModule: "evdev"
[   178.331] (II) UnloadModule: "synaptics"
[   178.331] (II) evdev: AT Translated Set 2 keyboard: Close
[   178.331] (II) UnloadModule: "evdev"
[   178.331] (II) evdev: Laptop_Integrated_Webcam_2HDM: Close
[   178.331] (II) UnloadModule: "evdev"
[   178.331] (II) evdev: Sleep Button: Close
[   178.331] (II) UnloadModule: "evdev"
[   178.331] (II) evdev: Power Button: Close
[   178.331] (II) UnloadModule: "evdev"
[   178.331] (II) evdev: Video Bus: Close
[   178.331] (II) UnloadModule: "evdev"
[   178.331] (II) evdev: Video Bus: Close
[   178.331] (II) UnloadModule: "evdev"
[   178.331] (II) evdev: Power Button: Close
[   178.331] (II) UnloadModule: "evdev"
[   178.345] (II) Server terminated successfully (0). Closing log file.

The log of Pacman for sunday :

[2015-11-22 22:01] [PACMAN] Running 'pacman -S x11vnc'
[2015-11-22 22:02] [ALPM] transaction started
[2015-11-22 22:02] [ALPM] installed x11vnc (0.9.13-6)
[2015-11-22 22:02] [ALPM] transaction completed
[2015-11-22 22:09] [PACMAN] Running 'pacman -S vnc4server'
[2015-11-22 22:09] [PACMAN] Running 'pacman --color auto -S vnc4server'
[2015-11-22 22:12] [PACMAN] Running 'pacman -S x11vnc'
[2015-11-22 22:12] [ALPM] transaction started
[2015-11-22 22:12] [ALPM] reinstalled x11vnc (0.9.13-6)
[2015-11-22 22:12] [ALPM] transaction completed
[2015-11-22 22:12] [PACMAN] Running 'pacman -S x11vnc'
[2015-11-22 22:12] [ALPM] transaction started
[2015-11-22 22:12] [ALPM] reinstalled x11vnc (0.9.13-6)
[2015-11-22 22:12] [ALPM] transaction completed
[2015-11-22 22:16] [PACMAN] Running 'pacman -S vncserver'
[2015-11-22 22:16] [PACMAN] Running 'pacman -S vncserver'
[2015-11-22 22:16] [PACMAN] Running 'pacman -S tigervnc'
[2015-11-22 22:16] [ALPM] transaction started
[2015-11-22 22:16] [ALPM] installed fltk (1.3.3-4)
[2015-11-22 22:17] [ALPM] installed tigervnc (1.5.0-1)
[2015-11-22 22:17] [ALPM] transaction completed
[2015-11-22 23:27] [PACMAN] Running 'pacman -Syu'
[2015-11-22 23:27] [PACMAN] synchronizing package lists
[2015-11-22 23:27] [PACMAN] starting full system upgrade
[2015-11-22 23:39] [ALPM] transaction started
[2015-11-22 23:39] [ALPM] upgraded alsa-lib (1.0.29-1 -> 1.1.0-1)
[2015-11-22 23:39] [ALPM] upgraded alsa-plugins (1.0.29-2 -> 1.1.0-1)
[2015-11-22 23:39] [ALPM] upgraded alsa-utils (1.0.29-2 -> 1.1.0-1)
[2015-11-22 23:39] [ALPM] upgraded pam (1.2.1-2 -> 1.2.1-3)
[2015-11-22 23:39] [ALPM] upgraded gmp (6.0.0-2 -> 6.1.0-1)
[2015-11-22 23:39] [ALPM] upgraded mesa (11.0.5-1 -> 11.0.6-1)
[2015-11-22 23:39] [ALPM] upgraded mesa-libgl (11.0.5-1 -> 11.0.6-1)
[2015-11-22 23:39] [ALPM] upgraded libinput (1.1.0-1 -> 1.1.1-1)
[2015-11-22 23:39] [ALPM] upgraded glib2 (2.46.1-1 -> 2.46.2-1)
[2015-11-22 23:39] [ALPM] upgraded harfbuzz (1.0.6-2 -> 1.1.0-1)
[2015-11-22 23:39] [ALPM] upgraded libpng (1.6.18-1 -> 1.6.19-1)
[2015-11-22 23:39] [ALPM] upgraded attica-qt5 (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded ki18n (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded karchive (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded taglib (1.9.1-1 -> 1.10-1)
[2015-11-22 23:39] [ALPM] upgraded ffmpeg (1:2.8.1-4 -> 1:2.8.2-1)
[2015-11-22 23:39] [ALPM] upgraded kfilemetadata (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kidletime (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded solid (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kcoreaddons (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kwidgetsaddons (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kjobwidgets (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kconfig (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kwindowsystem (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kcrash (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kdbusaddons (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kglobalaccel (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kcompletion (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kservice (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kauth (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kcodecs (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kguiaddons (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kconfigwidgets (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kitemviews (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kiconthemes (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded sonnet (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded ktextwidgets (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kxmlgui (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kbookmarks (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded knotifications (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kwallet (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kio (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded baloo (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded bind-tools (9.10.3-1 -> 9.10.3-2)
[2015-11-22 23:39] [ALPM] upgraded bluez-qt (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] installed noto-fonts (20150929-3)
[2015-11-22 23:39] [ALPM] upgraded frameworkintegration (5.15.0-2 -> 5.16.0-2)
[2015-11-22 23:39] [ALPM] upgraded breeze-icons (5.4.3-1 -> 5.16.0-2)
[2015-11-22 23:39] [ALPM] upgraded breeze (5.4.3-1 -> 5.4.3-2)
[2015-11-22 23:39] [ALPM] upgraded python2-lxml (3.4.4-2 -> 3.5.0-1)
[2015-11-22 23:39] [ALPM] upgraded gtk-update-icon-cache (3.18.4-1 -> 3.18.5-1)
[2015-11-22 23:39] [ALPM] upgraded calibre (2.43.0-1 -> 2.44.1-1)
[2015-11-22 23:39] [ALPM] upgraded cmake (3.3.2-3 -> 3.4.0-2)
[2015-11-22 23:39] [ALPM] upgraded knewstuff (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kparts (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded ktexteditor (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kpackage (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kdeclarative (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kcmutils (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kactivities-frameworks (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kinit (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kunitconversion (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kplotting (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kdewebkit (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kdesignerplugin (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kitemmodels (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kemoticons (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kdelibs4support (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kpty (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kdnssd (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded kjs (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded khtml (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded dolphin (15.08.3-1 -> 15.08.3-2)
[2015-11-22 23:39] [ALPM] upgraded extra-cmake-modules (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:39] [ALPM] upgraded geoclue2 (2.3.0-1 -> 2.4.0-1)
[2015-11-22 23:39] [ALPM] upgraded glibmm (2.46.1-1 -> 2.46.2-1)
[2015-11-22 23:39] [ALPM] upgraded gtk3 (3.18.4-1 -> 3.18.5-1)
[2015-11-22 23:39] [ALPM] upgraded harfbuzz-icu (1.0.6-2 -> 1.1.0-1)
[2015-11-22 23:39] [ALPM] upgraded jre7-openjdk-headless (7.u91_2.6.2-1 -> 7.u91_2.6.3-1)
[2015-11-22 23:39] [ALPM] upgraded jre7-openjdk (7.u91_2.6.2-1 -> 7.u91_2.6.3-1)
[2015-11-22 23:39] [ALPM] upgraded jdk7-openjdk (7.u91_2.6.2-1 -> 7.u91_2.6.3-1)
[2015-11-22 23:40] [ALPM] upgraded jre8-openjdk-headless (8.u65-1 -> 8.u66-1)
[2015-11-22 23:40] [ALPM] upgraded jre8-openjdk (8.u65-1 -> 8.u66-1)
[2015-11-22 23:40] [ALPM] upgraded jdk8-openjdk (8.u65-1 -> 8.u66-1)
[2015-11-22 23:40] [ALPM] upgraded kded (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded kdelibs (4.14.14-1 -> 4.14.14-2)
[2015-11-22 23:40] [ALPM] upgraded kdesu (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded kdoctools (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded kjsembed (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded knotifyconfig (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded kpeople (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded kross (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded plasma-framework (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded threadweaver (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded krunner (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded kxmlrpcclient (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded lib32-alsa-lib (1.0.29-1 -> 1.1.0-1)
[2015-11-22 23:40] [ALPM] upgraded lib32-libpng (1.6.18-1 -> 1.6.19-1)
[2015-11-22 23:40] [ALPM] upgraded lib32-gdk-pixbuf2 (2.32.1-1 -> 2.32.2-1)
[2015-11-22 23:40] [ALPM] upgraded lib32-mesa (11.0.5-1 -> 11.0.6-1)
[2015-11-22 23:40] [ALPM] upgraded lib32-mesa-libgl (11.0.5-1 -> 11.0.6-1)
[2015-11-22 23:40] [ALPM] upgraded xorg-server-common (1.17.4-2 -> 1.18.0-3)
[2015-11-22 23:40] [ALPM] upgraded xf86-input-evdev (2.10.0-1 -> 2.10.0-2)
[2015-11-22 23:40] [ALPM] upgraded xorg-server (1.17.4-2 -> 1.18.0-3)
[2015-11-22 23:40] [ALPM] upgraded nvidia-utils (355.11-1 -> 358.16-1)
[2015-11-22 23:40] [ALPM-SCRIPTLET] If you run into trouble with CUDA not being available, run nvidia-modprobe first.
[2015-11-22 23:40] [ALPM] upgraded lib32-nvidia-utils (355.11-1 -> 358.16-1)
[2015-11-22 23:40] [ALPM] upgraded lib32-primus (20150118-2 -> 20151110-1)
[2015-11-22 23:40] [ALPM] upgraded libkipi4 (15.08.3-1 -> 15.08.3-2)
[2015-11-22 23:40] [ALPM] upgraded libpaper (1.1.24-8 -> 1.1.24-9)
[2015-11-22 23:40] [ALPM] upgraded modemmanager-qt (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded networkmanager-qt (5.15.0-1 -> 5.16.0-1)
[2015-11-22 23:40] [ALPM] upgraded nmap (6.47-3 -> 7.00-1)
[2015-11-22 23:40] [ALPM] upgraded nvidia (355.11-4 -> 358.16-2.1)
[2015-11-22 23:40] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
[2015-11-22 23:40] [ALPM] upgraded openal (1.16.0-1 -> 1.17.0-1)
[2015-11-22 23:40] [ALPM] upgraded opencl-nvidia (355.11-1 -> 358.16-1)
[2015-11-22 23:40] [ALPM] upgraded oxygen-icons (15.04.3-1 -> 1:5.16.0-1)
[2015-11-22 23:40] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2015-11-22 23:40] [ALPM] upgraded pacman-mirrorlist (20151109-1 -> 20151122-1)
[2015-11-22 23:40] [ALPM] upgraded plasma-workspace-wallpapers (5.4.3-1 -> 5.4.3.1-1)
[2015-11-22 23:40] [ALPM] upgraded primus (20150118-2 -> 20151110-1)
[2015-11-22 23:40] [ALPM] upgraded prison-frameworks (1.1.1.20141027-1 -> 1.2.1.20150831-1)
[2015-11-22 23:40] [ALPM] upgraded python-pytest (2.8.2-1 -> 2.8.3-1)
[2015-11-22 23:40] [ALPM] upgraded python2-pytest (2.8.2-1 -> 2.8.3-1)
[2015-11-22 23:40] [ALPM] upgraded syncthing (0.12.2-1 -> 0.12.4-1)
[2015-11-22 23:40] [ALPM] upgraded syncthing-gtk (1:0.8-1 -> 1:0.8.0.1-1)
[2015-11-22 23:40] [ALPM] upgraded texlive-bin (2015.37497-4 -> 2015.37497-5)
[2015-11-22 23:40] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2015-11-22 23:40] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R... 
[2015-11-22 23:40] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R... 
[2015-11-22 23:40] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R... 
[2015-11-22 23:40] [ALPM-SCRIPTLET] mktexlsr: Done.
[2015-11-22 23:40] [ALPM] upgraded texlive-core (2015.37554-1 -> 2015.38835-1)
[2015-11-22 23:40] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.igIaysEnv2...
[2015-11-22 23:40] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2015-11-22 23:40] [ALPM-SCRIPTLET]              into /etc/texmf/web2c/updmap-local.cfg
[2015-11-22 23:40] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2015-11-22 23:40] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R... 
[2015-11-22 23:40] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R... 
[2015-11-22 23:40] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R... 
[2015-11-22 23:40] [ALPM-SCRIPTLET] mktexlsr: Done.
[2015-11-22 23:40] [ALPM-SCRIPTLET] « var/lib/texmf/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/trees/5058f1af8388633f609cadb75a75dc9d.lua » supprimé
[2015-11-22 23:40] [ALPM-SCRIPTLET] « var/lib/texmf/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/trees/5058f1af8388633f609cadb75a75dc9d.luc » supprimé
[2015-11-22 23:40] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2015-11-22 23:40] [ALPM-SCRIPTLET]  done.
[2015-11-22 23:40] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile ptex.ini for ptex/ptex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile eptex.ini for eptex/eptex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile euptex.ini for euptex/euptex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile aleph.ini for aleph/aleph not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile uptex.ini for uptex/uptex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile xmltex.ini for xmltex/pdftex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile lambda.ini for lamed/aleph not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile pdfxmltex.ini for pdfxmltex/pdftex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile pdfjadetex.ini for pdfjadetex/pdftex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile jadetex.ini for jadetex/pdftex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile uplatex.ini for uplatex/euptex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET] fmtutil [WARNING]: inifile platex.ini for platex/eptex not found.
[2015-11-22 23:41] [ALPM-SCRIPTLET]  done.
[2015-11-22 23:41] [ALPM-SCRIPTLET]  (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2015-11-22 23:41] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
[2015-11-22 23:41] [ALPM-SCRIPTLET]     see http://wiki.archlinux.org/index.php/TeX_Live
[2015-11-22 23:41] [ALPM] upgraded texlive-fontsextra (2015.37556-1 -> 2015.38746-1)
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.bRGTSRUpK7...
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2015-11-22 23:41] [ALPM-SCRIPTLET]              into /etc/texmf/web2c/updmap-local.cfg
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2015-11-22 23:41] [ALPM-SCRIPTLET]  done.
[2015-11-22 23:41] [ALPM] upgraded texlive-genericextra (2015.37262-1 -> 2015.38503-1)
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2015-11-22 23:41] [ALPM] upgraded texlive-latexextra (2015.37553-1 -> 2015.38831-1)
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.4akyU7uwP5...
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2015-11-22 23:41] [ALPM-SCRIPTLET]              into /etc/texmf/web2c/updmap-local.cfg
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2015-11-22 23:41] [ALPM-SCRIPTLET]  done.
[2015-11-22 23:41] [ALPM] upgraded texlive-langextra (2015.37297-1 -> 2015.38429-1)
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.DJMJVuNJQe...
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2015-11-22 23:41] [ALPM-SCRIPTLET]              into /etc/texmf/web2c/updmap-local.cfg
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2015-11-22 23:41] [ALPM-SCRIPTLET]  done.
[2015-11-22 23:41] [ALPM] upgraded texlive-langgreek (2015.36842-1 -> 2015.38707-1)
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.51VKQeixaU...
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
[2015-11-22 23:41] [ALPM-SCRIPTLET]              into /etc/texmf/web2c/updmap-local.cfg
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R... 
[2015-11-22 23:41] [ALPM-SCRIPTLET] mktexlsr: Done.
[2015-11-22 23:41] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
[2015-11-22 23:41] [ALPM-SCRIPTLET]  done.
[2015-11-22 23:41] [ALPM] upgraded virtualbox-host-dkms (5.0.8-2 -> 5.0.10-1)
[2015-11-22 23:41] [ALPM-SCRIPTLET] 
[2015-11-22 23:41] [ALPM-SCRIPTLET] Creating symlink /var/lib/dkms/vboxhost/5.0.10/source ->
[2015-11-22 23:41] [ALPM-SCRIPTLET]                  /usr/src/vboxhost-5.0.10
[2015-11-22 23:41] [ALPM-SCRIPTLET] 
[2015-11-22 23:41] [ALPM-SCRIPTLET] DKMS: add completed.
[2015-11-22 23:41] [ALPM-SCRIPTLET] ==> Remember to upgrade your running modules
[2015-11-22 23:41] [ALPM-SCRIPTLET] ==> You can do this running vboxreload command as root
[2015-11-22 23:41] [ALPM] upgraded virtualbox-host-modules (5.0.8-2 -> 5.0.10-2.1)
[2015-11-22 23:41] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2015-11-22 23:41] [ALPM] upgraded virtualbox (5.0.8-2 -> 5.0.10-1)
[2015-11-22 23:41] [ALPM] upgraded w3m (0.5.3-10 -> 0.5.3.git20151119-1)
[2015-11-22 23:41] [ALPM] upgraded wireshark-cli (1.12.8-1 -> 2.0.0-1)
[2015-11-22 23:41] [ALPM] installed wireshark-common (2.0.0-1)
[2015-11-22 23:42] [ALPM] upgraded wireshark-qt (1.12.8-1 -> 2.0.0-1)
[2015-11-22 23:42] [ALPM] upgraded xf86-input-synaptics (1.8.3-1 -> 1.8.3-2)
[2015-11-22 23:42] [ALPM] upgraded xf86-video-intel (1:2.99.917+478+gdf72bc5-2 -> 1:2.99.917+478+gdf72bc5-3)
[2015-11-22 23:42] [ALPM] upgraded xorg-server-devel (1.17.4-2 -> 1.18.0-3)
[2015-11-22 23:42] [ALPM] transaction completed

And the ouput of dmesg :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.13-1-lts (builduser@andyrtr) (gcc version 5.2.0 (GCC) ) #1 SMP Tue Nov 10 09:48:15 CET 2015
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=26270399-b7cc-468a-b151-4fb1cb819eb1 rw quiet
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bac8efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bac8f000-0x00000000bacabfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bacac000-0x00000000bacb8fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bacb9000-0x00000000badcefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000badcf000-0x00000000badcffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000badd0000-0x00000000badfafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000badfb000-0x00000000badfcfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000badfd000-0x00000000badfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000badff000-0x00000000bae01fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae02000-0x00000000bae09fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bae0a000-0x00000000bae1afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bae1b000-0x00000000baf17fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baf18000-0x00000000baf1bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baf1c000-0x00000000baf1efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000baf1f000-0x00000000baf9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e9fefff] usable
[    0.000000] BIOS-e820: [mem 0x000000023e9ff000-0x000000023fdfffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Dell Inc.          Dell System XPS L502X/0NJT03, BIOS A06 07/20/2011
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x23e9ff max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 23FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[    0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[    0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23e600000-0x23e7fffff]
[    0.000000]  [mem 0x23e600000-0x23e7fffff] page 2M
[    0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x220000000-0x23e5fffff]
[    0.000000]  [mem 0x220000000-0x23e5fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[    0.000000]  [mem 0x200000000-0x21fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbac8efff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbabfffff] page 2M
[    0.000000]  [mem 0xbac00000-0xbac8efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbafff000-0xbaffffff]
[    0.000000]  [mem 0xbafff000-0xbaffffff] page 4k
[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x23e800000-0x23e9fefff]
[    0.000000]  [mem 0x23e800000-0x23e9fefff] page 4k
[    0.000000] RAMDISK: [mem 0x37930000-0x37c8ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F00E0 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000BAFFE120 00008C (v01 DELL   QA09     00000002 LOHR 00000002)
[    0.000000] ACPI: FACP 0x00000000BAFEF000 0000F4 (v03 DELL   QA09     00000002 PTL  00000002)
[    0.000000] ACPI: DSDT 0x00000000BAFF2000 008C93 (v02 DELL   SNB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000BAF40000 000040
[    0.000000] ACPI: FACS 0x00000000BAF40000 000040
[    0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 DELL   QA09     00000002 LOHR 00000001)
[    0.000000] ACPI: SSDT 0x00000000BAFFB000 001068 (v01 DELL   PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000BAFF1000 0000A5 (v32 DELL   QA09     00000002 PTL  00000002)
[    0.000000] ACPI: HPET 0x00000000BAFEE000 000038 (v01 DELL   QA09     00000002 PTL  00000002)
[    0.000000] ACPI: APIC 0x00000000BAFED000 000098 (v01 DELL   QA09     00000002 PTL  00000002)
[    0.000000] ACPI: MCFG 0x00000000BAFEC000 00003C (v01 DELL   QA09     00000002 PTL  00000002)
[    0.000000] ACPI: SSDT 0x00000000BAFEA000 00124D (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE9000 00090C (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000BAFE8000 000996 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000BAFE7000 00003E (v01 DELL   QA09     00000002 PTL  00000002)
[    0.000000] ACPI: UEFI 0x00000000BAFE6000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: UEFI 0x00000000BAFE5000 00026A (v01 DELL   QA09     00000002 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023e9fefff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23e9fb000-0x23e9fefff]
[    0.000000]  [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880235e00000-ffff88023ddfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023e9fefff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bac8efff]
[    0.000000]   node   0: [mem 0x00000000bafff000-0x00000000baffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023e9fefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023e9fefff]
[    0.000000] On node 0 totalpages: 2070059
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 156 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11891 pages used for memmap
[    0.000000]   DMA32 zone: 760976 pages, LIFO batch:31
[    0.000000]   Normal zone: 20392 pages used for memmap
[    0.000000]   Normal zone: 1305087 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbac8f000-0xbacabfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbacac000-0xbacb8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbacb9000-0xbadcefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadcf000-0xbadcffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadd0000-0xbadfafff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadfb000-0xbadfcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadfd000-0xbadfefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbadff000-0xbae01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbae02000-0xbae09fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbae0a000-0xbae1afff]
[    0.000000] PM: Registered nosave memory: [mem 0xbae1b000-0xbaf17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf18000-0xbaf1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf1c000-0xbaf1efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf1f000-0xbaf9efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88023e400000 s95128 r8192 d31848 u262144
[    0.000000] pcpu-alloc: s95128 r8192 d31848 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2037556
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=26270399-b7cc-468a-b151-4fb1cb819eb1 rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8066172K/8280236K available (5660K kernel code, 898K rwdata, 1740K rodata, 1188K init, 1152K bss, 214064K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:8448 nr_irqs:488 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1995.414 MHz processor
[    0.000041] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.82 BogoMIPS (lpj=19954140)
[    0.000044] pid_max: default: 32768 minimum: 301
[    0.000050] ACPI: Core revision 20150410
[    0.009092] ACPI: All ACPI Tables successfully acquired
[    0.009119] Security Framework initialized
[    0.009124] Yama: becoming mindful.
[    0.009713] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.011642] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012464] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012476] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012707] Initializing cgroup subsys blkio
[    0.012710] Initializing cgroup subsys memory
[    0.012718] Initializing cgroup subsys devices
[    0.012720] Initializing cgroup subsys freezer
[    0.012722] Initializing cgroup subsys net_cls
[    0.012746] Disabled fast string operations
[    0.012748] CPU: Physical Processor ID: 0
[    0.012749] CPU: Processor Core ID: 0
[    0.012754] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.012755] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.012757] mce: CPU supports 9 MCE banks
[    0.012769] CPU0: Thermal monitoring handled by SMI
[    0.012779] process: using mwait in idle threads
[    0.012783] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.012784] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.013242] Freeing SMP alternatives memory: 20K (ffffffff81a0b000 - ffffffff81a10000)
[    0.064792] ftrace: allocating 21656 entries in 85 pages
[    0.076509] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.076961] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.176939] TSC deadline timer enabled
[    0.176943] smpboot: CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz (fam: 06, model: 2a, stepping: 07)
[    0.176970] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[    0.176992] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[    0.176995] ... version:                3
[    0.176996] ... bit width:              48
[    0.176997] ... generic registers:      4
[    0.176998] ... value mask:             0000ffffffffffff
[    0.176999] ... max period:             0000ffffffffffff
[    0.177000] ... fixed-purpose events:   3
[    0.177001] ... event mask:             000000070000000f
[    0.177570] x86: Booting SMP configuration:
[    0.177573] .... node  #0, CPUs:      #1
[    0.188715] Disabled fast string operations
[    0.188734] CPU1: Thermal monitoring handled by SMI
[    0.190902]  #2
[    0.202037] Disabled fast string operations
[    0.202056] CPU2: Thermal monitoring handled by SMI
[    0.215349]  #3
[    0.215349] Disabled fast string operations
[    0.215367] CPU3: Thermal monitoring handled by SMI
[    0.228677]  #4
[    0.228677] Disabled fast string operations
[    0.228696] CPU4: Thermal monitoring handled by SMI
[    0.241991]  #5
[    0.241991] Disabled fast string operations
[    0.242008] CPU5: Thermal monitoring handled by SMI
[    0.255303]  #6
[    0.255303] Disabled fast string operations
[    0.255322] CPU6: Thermal monitoring handled by SMI
[    0.268623]  #7
[    0.268624] Disabled fast string operations
[    0.268641] CPU7: Thermal monitoring handled by SMI
[    0.270729] x86: Booted up 1 node, 8 CPUs
[    0.270734] smpboot: Total of 8 processors activated (31926.62 BogoMIPS)
[    0.279142] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.279387] devtmpfs: initialized
[    0.282640] PM: Registering ACPI NVS region [mem 0xbacac000-0xbacb8fff] (53248 bytes)
[    0.282642] PM: Registering ACPI NVS region [mem 0xbadcf000-0xbadcffff] (4096 bytes)
[    0.282643] PM: Registering ACPI NVS region [mem 0xbadfb000-0xbadfcfff] (8192 bytes)
[    0.282645] PM: Registering ACPI NVS region [mem 0xbadff000-0xbae01fff] (12288 bytes)
[    0.282646] PM: Registering ACPI NVS region [mem 0xbae0a000-0xbae1afff] (69632 bytes)
[    0.282648] PM: Registering ACPI NVS region [mem 0xbaf18000-0xbaf1bfff] (16384 bytes)
[    0.282649] PM: Registering ACPI NVS region [mem 0xbaf1f000-0xbaf9efff] (524288 bytes)
[    0.282759] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.282853] pinctrl core: initialized pinctrl subsystem
[    0.282897] RTC time:  6:38:34, date: 11/24/15
[    0.283024] NET: Registered protocol family 16
[    0.309062] cpuidle: using governor ladder
[    0.339051] cpuidle: using governor menu
[    0.339174] ACPI: bus type PCI registered
[    0.339176] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.339284] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.339286] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.339391] PCI: Using configuration type 1 for base access
[    0.339753] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.339756] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.339757] mtrr: probably your BIOS does not setup all CPUs.
[    0.339758] mtrr: corrected configuration.
[    0.369490] ACPI: Added _OSI(Module Device)
[    0.369492] ACPI: Added _OSI(Processor Device)
[    0.369494] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.369495] ACPI: Added _OSI(Processor Aggregator Device)
[    0.372644] ACPI: Executed 1 blocks of module-level executable AML code
[    0.375192] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.376048] ACPI: Dynamic OEM Table Load:
[    0.376058] ACPI: SSDT 0xFFFF880234E9A000 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.376667] ACPI: Dynamic OEM Table Load:
[    0.376674] ACPI: SSDT 0xFFFF880234A12C00 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.377201] ACPI: Dynamic OEM Table Load:
[    0.377207] ACPI: SSDT 0xFFFF880234A02600 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.378701] ACPI : EC: EC started
[    0.382137] ACPI: Interpreter enabled
[    0.382147] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[    0.382152] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[    0.382168] ACPI: (supports S0 S3 S4 S5)
[    0.382170] ACPI: Using IOAPIC for interrupt routing
[    0.382198] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.388822] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.388828] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.388864] \_SB_.PCI0:_OSC invalid UUID
[    0.388865] _OSC request data:1 1f 0 
[    0.388869] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.389313] PCI host bridge to bus 0000:00
[    0.389317] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.389319] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.389321] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.389323] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.389325] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff window]
[    0.389327] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.389335] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[    0.389426] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.389461] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.389495] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.389546] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.389556] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[    0.389563] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.389568] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.389715] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[    0.389738] pci 0000:00:16.0: reg 0x10: [mem 0xf1c05000-0xf1c0500f 64bit]
[    0.389815] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.389901] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.389921] pci 0000:00:1a.0: reg 0x10: [mem 0xf1c0a000-0xf1c0a3ff]
[    0.390006] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.390056] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.390106] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.390125] pci 0000:00:1b.0: reg 0x10: [mem 0xf1c00000-0xf1c03fff 64bit]
[    0.390199] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.390237] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.390288] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.390395] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.390439] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.390488] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[    0.390605] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.390649] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.390701] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[    0.390818] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.390862] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.390908] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[    0.390984] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.391022] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.391068] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[    0.391144] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.391183] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.391234] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.391254] pci 0000:00:1d.0: reg 0x10: [mem 0xf1c09000-0xf1c093ff]
[    0.391339] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.391388] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.391437] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
[    0.391610] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[    0.391628] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.391637] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.391645] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.391654] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.391663] pci 0000:00:1f.2: reg 0x20: [io  0x4060-0x407f]
[    0.391672] pci 0000:00:1f.2: reg 0x24: [mem 0xf1c08000-0xf1c087ff]
[    0.391712] pci 0000:00:1f.2: PME# supported from D3hot
[    0.391786] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.391804] pci 0000:00:1f.3: reg 0x10: [mem 0xf1c04000-0xf1c040ff 64bit]
[    0.391827] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.391961] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
[    0.391971] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
[    0.391980] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.391990] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.391996] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.392003] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.392073] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.409083] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.409091] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.409098] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    0.409107] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.409208] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.409446] pci 0000:03:00.0: [8086:0091] type 00 class 0x028000
[    0.409623] pci 0000:03:00.0: reg 0x10: [mem 0xf1b00000-0xf1b01fff 64bit]
[    0.410301] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.410423] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.429212] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.429221] pci 0000:00:1c.1:   bridge window [mem 0xf1b00000-0xf1bfffff]
[    0.429376] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
[    0.429408] pci 0000:04:00.0: reg 0x10: [mem 0xf1a00000-0xf1a01fff 64bit]
[    0.429547] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.429578] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.449139] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.449153] pci 0000:00:1c.3:   bridge window [mem 0xf1a00000-0xf1afffff]
[    0.449263] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.449270] pci 0000:00:1c.4:   bridge window [mem 0xf1900000-0xf19fffff]
[    0.449352] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[    0.449377] pci 0000:06:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.449413] pci 0000:06:00.0: reg 0x18: [mem 0xf1804000-0xf1804fff 64bit pref]
[    0.449436] pci 0000:06:00.0: reg 0x20: [mem 0xf1800000-0xf1803fff 64bit pref]
[    0.449535] pci 0000:06:00.0: supports D1 D2
[    0.449537] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.449571] pci 0000:06:00.0: System wakeup disabled by ACPI
[    0.469092] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.469101] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.469120] pci 0000:00:1c.5:   bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
[    0.469746] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.469801] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.469854] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.469906] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.469958] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.470009] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.470062] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.470113] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.470318] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.470395] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.470498] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.470501] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.470506] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    0.470508] vgaarb: loaded
[    0.470509] vgaarb: bridge control possible 0000:01:00.0
[    0.470510] vgaarb: no bridge control possible 0000:00:02.0
[    0.470596] PCI: Using ACPI for IRQ routing
[    0.472183] PCI: pci_cache_line_size set to 64 bytes
[    0.472343] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.472345] e820: reserve RAM buffer [mem 0xbac8f000-0xbbffffff]
[    0.472347] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[    0.472349] e820: reserve RAM buffer [mem 0x23e9ff000-0x23fffffff]
[    0.472502] NetLabel: Initializing
[    0.472504] NetLabel:  domain hash size = 128
[    0.472505] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.472516] NetLabel:  unlabeled traffic allowed by default
[    0.472541] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.472546] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.475585] Switched to clocksource hpet
[    0.480933] pnp: PnP ACPI init
[    0.481071] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.481075] system 00:00: [io  0x1000-0x1003] has been reserved
[    0.481077] system 00:00: [io  0x1004-0x1013] has been reserved
[    0.481079] system 00:00: [io  0xffff] has been reserved
[    0.481081] system 00:00: [io  0x0400-0x0453] could not be reserved
[    0.481083] system 00:00: [io  0x0458-0x047f] has been reserved
[    0.481085] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.481087] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.481091] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.481130] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.481187] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.481190] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.481250] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.481301] pnp 00:04: Plug and Play ACPI device, IDs DLL050e PNP0f13 (active)
[    0.481414] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    0.481442] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.481444] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.481446] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.481448] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.481450] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.481452] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.481454] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.481456] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.481458] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.481460] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.481463] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.481659] pnp: PnP ACPI: found 6 devices
[    0.488252] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.488260] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.488323] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[    0.488325] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.488328] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.488331] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
[    0.488334] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.488338] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.488356] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.488363] pci 0000:00:1c.1:   bridge window [mem 0xf1b00000-0xf1bfffff]
[    0.488375] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.488381] pci 0000:00:1c.3:   bridge window [mem 0xf1a00000-0xf1afffff]
[    0.488393] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.488399] pci 0000:00:1c.4:   bridge window [mem 0xf1900000-0xf19fffff]
[    0.488408] pci 0000:00:1c.5: PCI bridge to [bus 06]
[    0.488411] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.488419] pci 0000:00:1c.5:   bridge window [mem 0xf1800000-0xf18fffff 64bit pref]
[    0.488427] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.488429] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.488431] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.488433] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff window]
[    0.488435] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff window]
[    0.488437] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.488438] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[    0.488440] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.488442] pci_bus 0000:03: resource 1 [mem 0xf1b00000-0xf1bfffff]
[    0.488444] pci_bus 0000:04: resource 1 [mem 0xf1a00000-0xf1afffff]
[    0.488446] pci_bus 0000:05: resource 1 [mem 0xf1900000-0xf19fffff]
[    0.488448] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.488450] pci_bus 0000:06: resource 2 [mem 0xf1800000-0xf18fffff 64bit pref]
[    0.488486] NET: Registered protocol family 2
[    0.488695] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.488879] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.489025] TCP: Hash tables configured (established 65536 bind 65536)
[    0.489061] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.489097] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.489161] NET: Registered protocol family 1
[    0.489177] pci 0000:00:02.0: Video device with shadowed ROM
[    0.490388] PCI: CLS 64 bytes, default 64
[    0.490437] Unpacking initramfs...
[    0.560341] Freeing initrd memory: 3456K (ffff880037930000 - ffff880037c90000)
[    0.560351] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.560354] software IO TLB [mem 0xb6c8f000-0xbac8f000] (64MB) mapped at [ffff8800b6c8f000-ffff8800bac8efff]
[    0.560409] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    0.560411] hw unit of domain pp0-core 2^-16 Joules
[    0.560412] hw unit of domain package 2^-16 Joules
[    0.560413] hw unit of domain pp1-gpu 2^-16 Joules
[    0.560508] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
[    0.560516] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
[    0.560521] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
[    0.560529] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
[    0.560540] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a
[    0.560549] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a
[    0.560557] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a
[    0.560566] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a
[    0.560618] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.560654] Scanning for low memory corruption every 60 seconds
[    0.561024] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.561048] Initialise system trusted keyring
[    0.561413] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.563175] zpool: loaded
[    0.563178] zbud: loaded
[    0.563354] VFS: Disk quotas dquot_6.6.0
[    0.563394] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.563569] Key type big_key registered
[    0.563781] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.563834] io scheduler noop registered
[    0.563838] io scheduler deadline registered (default)
[    0.563875] io scheduler cfq registered
[    0.564574] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.564592] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.564606] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.564607] vesafb: scrolling: redraw
[    0.564609] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.564628] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
[    0.652242] Console: switching to colour frame buffer device 170x48
[    0.739526] fb0: VESA VGA frame buffer device
[    0.739544] intel_idle: MWAIT substates: 0x21120
[    0.739546] intel_idle: v0.4 model 0x2A
[    0.739547] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.739921] GHES: HEST is not enabled!
[    0.739994] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.740437] Linux agpgart interface v0.103
[    0.741126] rtc_cmos 00:01: RTC can wake from S4
[    0.741259] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.741290] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.741303] Intel P-state driver initializing.
[    0.741535] ledtrig-cpu: registered to indicate activity on CPUs
[    0.742335] NET: Registered protocol family 10
[    0.742831] NET: Registered protocol family 17
[    0.744122] Loading compiled-in X.509 certificates
[    0.744151] registered taskstats version 1
[    0.745264]   Magic number: 7:51:621
[    0.745418] rtc_cmos 00:01: setting system clock to 2015-11-24 06:38:34 UTC (1448347114)
[    0.745729] PM: Hibernation image not present or could not be loaded.
[    0.746543] Freeing unused kernel memory: 1188K (ffffffff818e2000 - ffffffff81a0b000)
[    0.746547] Write protecting the kernel read-only data: 8192k
[    0.747434] Freeing unused kernel memory: 472K (ffff88000158a000 - ffff880001600000)
[    0.747782] Freeing unused kernel memory: 308K (ffff8800017b3000 - ffff880001800000)
[    0.762590] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    0.801075] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.806118] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.806129] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.810036] ACPI: bus type USB registered
[    0.810088] usbcore: registered new interface driver usbfs
[    0.810117] usbcore: registered new interface driver hub
[    0.810167] usbcore: registered new device driver usb
[    0.810875] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.811413] ehci-pci: EHCI PCI platform driver
[    0.811621] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.811630] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[    0.811796] xhci_hcd 0000:04:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    0.812301] hub 1-0:1.0: USB hub found
[    0.812325] hub 1-0:1.0: 2 ports detected
[    0.812517] SCSI subsystem initialized
[    0.812551] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    0.812559] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    0.812561] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.812570] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.812597] ehci-pci 0000:00:1a.0: debug port 2
[    0.814272] libata version 3.00 loaded.
[    0.815265] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.815590] hub 2-0:1.0: USB hub found
[    0.815610] hub 2-0:1.0: 2 ports detected
[    0.816520] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.816543] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf1c0a000
[    0.835523] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.835632] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.835877] hub 3-0:1.0: USB hub found
[    0.835919] hub 3-0:1.0: 2 ports detected
[    0.836359] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.836364] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.836376] ehci-pci 0000:00:1d.0: debug port 2
[    0.840281] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.840294] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf1c09000
[    0.855609] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.856610] hub 4-0:1.0: USB hub found
[    0.856668] hub 4-0:1.0: 2 ports detected
[    0.857184] ahci 0000:00:1f.2: version 3.0
[    0.857458] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.875653] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[    0.875667] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    0.917406] scsi host0: ahci
[    0.918095] scsi host1: ahci
[    0.918767] scsi host2: ahci
[    0.919233] scsi host3: ahci
[    0.919621] scsi host4: ahci
[    0.919971] scsi host5: ahci
[    0.920098] ata1: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08100 irq 33
[    0.920104] ata2: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08180 irq 33
[    0.920107] ata3: DUMMY
[    0.920110] ata4: DUMMY
[    0.920114] ata5: SATA max UDMA/133 abar m2048@0xf1c08000 port 0xf1c08300 irq 33
[    0.920116] ata6: DUMMY
[    1.155505] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.175482] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.265481] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.266039] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.266087] ata1.00: supports DRM functions and may not be fully accessible
[    1.266220] ata1.00: READ LOG DMA EXT failed, trying unqueued
[    1.269140] ata1.00: disabling queued TRIM support
[    1.269148] ata1.00: ATA-9: Crucial_CT120M500SSD1, MU03, max UDMA/133
[    1.269152] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.272992] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    1.273039] ata1.00: supports DRM functions and may not be fully accessible
[    1.275970] ata1.00: disabling queued TRIM support
[    1.279318] ata1.00: configured for UDMA/133
[    1.279749] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT120M50 MU03 PQ: 0 ANSI: 5
[    1.306895] hub 3-1:1.0: USB hub found
[    1.307097] hub 3-1:1.0: 6 ports detected
[    1.326891] hub 4-1:1.0: USB hub found
[    1.327123] hub 4-1:1.0: 8 ports detected
[    1.555358] tsc: Refined TSC clocksource calibration: 1995.466 MHz
[    1.555364] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x3986e6ba568, max_idle_ns: 881590718426 ns
[    1.585357] usb 3-1.4: new high-speed USB device number 3 using ehci-pci
[    1.625366] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.647168] ata2.00: ATA-8: ST9750420AS, 0001DEM1, max UDMA/133
[    1.647178] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.677761] ata2.00: configured for UDMA/133
[    1.678201] scsi 1:0:0:0: Direct-Access     ATA      ST9750420AS      DEM1 PQ: 0 ANSI: 5
[    2.025233] ata5: SATA link down (SStatus 0 SControl 300)
[    2.035068] ata1.00: Enabling discard_zeroes_data
[    2.035152] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    2.035158] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.035312] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[    2.035316] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    2.035628] sd 1:0:0:0: [sdb] Write Protect is off
[    2.035633] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.035639] sd 0:0:0:0: [sda] Write Protect is off
[    2.035661] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.035764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.035809] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.036120] ata1.00: Enabling discard_zeroes_data
[    2.036802]  sda: sda1 sda2 sda3
[    2.037373] ata1.00: Enabling discard_zeroes_data
[    2.038044] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.123369]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
[    2.126260] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.555299] Switched to clocksource tsc
[    2.892703] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.995273] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.998304] systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[    2.998591] systemd[1]: Detected architecture x86-64.
[    2.998836] systemd[1]: Set hostname to <dell-l502x-arch>.
[    3.118367] systemd[1]: bumblebeed.service: Cannot add dependency job, ignoring: Unit bumblebeed.service failed to load: No such file or directory.
[    3.119165] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    3.119262] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.119623] systemd[1]: Created slice System Slice.
[    3.119779] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.119909] systemd[1]: Created slice system-dhcpcd.slice.
[    3.119952] systemd[1]: Listening on LVM2 metadata daemon socket.
[    3.119996] systemd[1]: Listening on Journal Socket.
[    3.122664] systemd[1]: Mounting NFSD configuration filesystem...
[    3.123172] systemd[1]: Mounting Debug File System...
[    3.123882] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    3.124513] systemd[1]: Mounting Huge Pages File System...
[    3.124555] systemd[1]: Reached target RPC Port Mapper.
[    3.124608] systemd[1]: Reached target Remote File Systems.
[    3.124755] systemd[1]: Created slice User and Session Slice.
[    3.124843] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.124873] systemd[1]: Reached target Slices.
[    3.130182] systemd[1]: Created slice system-getty.slice.
[    3.130200] systemd[1]: Reached target Host and Network Name Lookups.
[    3.130678] systemd[1]: Starting Setup Virtual Console...
[    3.130751] systemd[1]: Listening on udev Kernel Socket.
[    3.130800] systemd[1]: Listening on udev Control Socket.
[    3.130818] systemd[1]: Reached target Encrypted Volumes.
[    3.130856] systemd[1]: Reached target Login Prompts.
[    3.131413] systemd[1]: Starting Remount Root and Kernel File Systems...
[    3.131479] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.132032] systemd[1]: Mounting POSIX Message Queue File System...
[    3.132199] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    3.134580] systemd[1]: Starting Load Kernel Modules...
[    3.134619] systemd[1]: Reached target Swap.
[    3.134697] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.135274] systemd[1]: Starting Journal Service...
[    3.135874] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    3.136483] systemd[1]: Mounted POSIX Message Queue File System.
[    3.136506] systemd[1]: Mounted Debug File System.
[    3.136518] systemd[1]: Mounted Huge Pages File System.
[    3.136787] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    3.137038] systemd[1]: Started Remount Root and Kernel File Systems.
[    3.149736] bbswitch: version 0.8
[    3.149742] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    3.149747] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    3.149756] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[    3.149801] systemd[1]: Starting udev Coldplug all Devices...
[    3.149891] bbswitch: detected an Optimus _DSM function
[    3.149901] pci 0000:01:00.0: enabling device (0006 -> 0007)
[    3.149931] bbswitch: disabling discrete graphics
[    3.149934] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20150410/nsarguments-95)
[    3.150241] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.154385] RPC: Registered named UNIX socket transport module.
[    3.154388] RPC: Registered udp transport module.
[    3.154389] RPC: Registered tcp transport module.
[    3.154389] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.171097] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.172030] systemd[1]: Mounted NFSD configuration filesystem.
[    3.180308] systemd[1]: Started Create Static Device Nodes in /dev.
[    3.181003] systemd[1]: Starting udev Kernel Device Manager...
[    3.181030] systemd[1]: Reached target Local File Systems (Pre).
[    3.185114] systemd[1]: Started Journal Service.
[    3.214796] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[    3.220802] FS-Cache: Loaded
[    3.226243] FS-Cache: Netfs 'nfs' registered for caching
[    3.258168] thermal LNXTHERM:00: registered as thermal_zone0
[    3.258171] ACPI: Thermal Zone [TZ00] (44 C)
[    3.258447] thermal LNXTHERM:01: registered as thermal_zone1
[    3.258450] ACPI: Thermal Zone [TZ01] (44 C)
[    3.268722] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254)
[    3.268728] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.268732] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[    3.268735] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150410/utaddress-254)
[    3.268738] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.268739] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[    3.268742] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150410/utaddress-254)
[    3.268744] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.268745] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150410/utaddress-254)
[    3.268748] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150410/utaddress-254)
[    3.268750] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.268751] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.269410] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[    3.269415] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.269488] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.282809] [drm] Initialized drm 1.1.0 20060810
[    3.354783] ACPI: AC Adapter [ADP0] (on-line)
[    3.354858] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    3.354863] ACPI: Power Button [PWRB]
[    3.354903] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    3.354905] ACPI: Sleep Button [SLPB]
[    3.354942] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    3.355625] ACPI: Lid Switch [LID0]
[    3.355670] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    3.355673] ACPI: Power Button [PWRF]
[    3.365474] ACPI: Battery Slot [BAT0] (battery present)
[    3.365643] wmi: Mapper loaded
[    3.381961] nvidia: module license 'NVIDIA' taints kernel.
[    3.381966] Disabling lock debugging due to kernel taint
[    3.405376] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.405394] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.405833] r8169 0000:06:00.0 eth0: RTL8168e/8111e at 0xffffc90000c84000, 84:8f:69:ab:f4:d5, XID 0c200000 IRQ 35
[    3.405836] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.408159] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    3.410335] cfg80211: Calling CRDA to update world regulatory domain
[    3.420154] Intel(R) Wireless WiFi driver for Linux
[    3.420158] Copyright(c) 2003- 2015 Intel Corporation
[    3.420338] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.420748] AVX version of gcm_enc/dec engaged.
[    3.420751] AES CTR mode by8 optimization enabled
[    3.429896] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    3.431775] snd_hda_codec_realtek hdaudioC0D0: ALC665: SKU not ready 0x598301f0
[    3.432165] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC665: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[    3.432169] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.432171] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x1b/0x19/0x0/0x0/0x0)
[    3.432174] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    3.432176] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    3.432178] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    3.432181] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[    3.432183] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    3.438080] [drm] Memory usable by graphics device = 2048M
[    3.438085] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    3.438087] fb: switching to inteldrmfb from VESA VGA
[    3.438107] Console: switching to colour dummy device 80x25
[    3.438192] [drm] Replacing VGA console driver
[    3.445952] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.445958] [drm] Driver supports precise vblank timestamp query.
[    3.446139] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    3.446890] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    3.447432] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    3.447516] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    3.447598] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    3.447677] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.450571] intel_rapl: Found RAPL domain package
[    3.450576] intel_rapl: Found RAPL domain core
[    3.450578] intel_rapl: Found RAPL domain uncore
[    3.455519] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    3.457549] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    3.457553] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    3.457555] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    3.457557] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
[    3.457874] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    3.469910] iwlwifi 0000:03:00.0: RF_KILL bit toggled to disable radio.
[    3.472812] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20150410/video-1281)
[    3.472819] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    3.472929] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input13
[    3.475786] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.476053] acpi device:34: registered as cooling_device9
[    3.476145] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input14
[    3.476203] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[    3.478137] iTCO_vendor_support: vendor-support=0
[    3.478756] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.478792] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    3.478950] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.479192] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    3.482802] input: Dell WMI hotkeys as /devices/virtual/input/input15
[    3.483720] r8169 0000:06:00.0 enp6s0: renamed from eth0
[    3.534698] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[    3.575917] fbcon: inteldrmfb (fb0) is primary device
[    3.658694] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    3.970441] Non-volatile memory driver v1.3
[    3.974501] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[    3.974610] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[    3.974750] nvidia-nvlink: Nvlink Core is being initialized, major device number 250
[    3.974935] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
[    3.974943] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  358.16  Mon Nov 16 19:25:55 PST 2015
[    4.183007] psmouse serio1: synaptics: queried max coordinates: x [..5398], y [..4728]
[    4.254721] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0x8a0400, board id: 0, fw id: 662324
[    4.302235] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    4.306509] mousedev: PS/2 mouse device common for all mice
[    4.375004] Console: switching to colour frame buffer device 170x48
[    4.378604] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.378608] i915 0000:00:02.0: registered panic notifier
[    4.442207] EXT4-fs (sdb10): mounted filesystem with ordered data mode. Opts: data=ordered
[    4.749282] random: nonblocking pool is initialized
[    4.809150] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: data=ordered
[    4.881259] systemd-journald[200]: Received request to flush runtime journal from PID 1
[    4.931229] media: Linux media interface: v0.10
[    4.935904] Linux video capture interface: v2.00
[    5.094814] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2HDM (0408:2fb1)
[    5.246889] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: data=ordered
[    5.367371] uvcvideo: No streaming interface found for terminal 6.
[    5.367528] input: Laptop_Integrated_Webcam_2HDM as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input16
[    5.367861] usbcore: registered new interface driver uvcvideo
[    5.367867] USB Video Class driver (1.1.1)
[    5.590132] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    6.553729] cfg80211: Calling CRDA to update world regulatory domain
[    9.702744] cfg80211: Calling CRDA to update world regulatory domain
[   12.851752] cfg80211: Calling CRDA to update world regulatory domain
[   15.034852] r8169 0000:06:00.0 enp6s0: link down
[   15.034866] r8169 0000:06:00.0 enp6s0: link down
[   15.034895] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[   15.583295] vboxdrv: Found 8 processor cores
[   15.611338] vboxdrv: TSC mode is Invariant, tentative frequency 1995463373 Hz
[   15.611345] vboxdrv: Successfully loaded version 5.0.10_OSE (interface 0x00240000)
[   15.614184] VBoxNetAdp: Successfully started.
[   15.617240] VBoxNetFlt: Successfully started.
[   15.619320] VBoxPciLinuxInit
[   15.621361] vboxpci: IOMMU not found (not registered)
[   16.000754] cfg80211: Calling CRDA to update world regulatory domain
[   16.897664] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[   16.900602] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   17.758898] r8169 0000:06:00.0 enp6s0: link up
[   17.758918] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[   19.149664] cfg80211: Calling CRDA to update world regulatory domain
[   22.298731] cfg80211: Calling CRDA to update world regulatory domain
[   25.447735] cfg80211: Calling CRDA to update world regulatory domain
[   27.489533] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[   27.513858] acpi_call: Cannot get handle: Error: AE_NOT_FOUND
[   27.719677] NFSD: starting 90-second grace period (net ffffffff818a9b00)
[   28.596723] cfg80211: Calling CRDA to update world regulatory domain
[   31.745718] cfg80211: Calling CRDA to update world regulatory domain
[   34.894681] cfg80211: Calling CRDA to update world regulatory domain
[   38.043722] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

If anyone has an idea on what happened and what I can do to fix it,

Thanks.

Offline

#2 2015-11-25 18:15:38

kabads
Member
Registered: 2012-09-22
Posts: 144
Website

Re: Xorg not starting after upgrade

I think I'm having the same issue as you - it seems that you are also running the nvidia driver. Everything seems to start fine, but doesn't switch the display from tty. I've tried changing the xorg.conf to xorg.conf.d/40-nvidia.conf but it still produces the same result.

Offline

#3 2015-11-26 07:25:01

Nono3167
Member
Registered: 2015-11-23
Posts: 3

Re: Xorg not starting after upgrade

For now, I have downgraded all the packages I upgraded last sunday and it's working fine.

I'll try to upgrade them each at a time in the next coupe of days to see which one is causing trouble (even if I assume it's one of the xorg related ones).

Offline

#4 2015-11-26 08:24:04

smnpl
Member
From: Germany
Registered: 2015-01-07
Posts: 45

Re: Xorg not starting after upgrade

Maybe related to this:
https://www.archlinux.org/news/xorg-118 … s-testing/

Now nvidia seems to be compatible, but the mailer explicitly warned, that nvidia will be incompatible with the newest xorg from testing.


The road to wisdom? - Well, it's plain and simple to express: Err and err and err again but less and less and less. - Piet Hein -

Offline

#5 2015-11-26 10:29:09

doblerone
Member
Registered: 2011-12-08
Posts: 163

Re: Xorg not starting after upgrade

The same problem here. I'm with the nvidia drivers, using plasma and sddm.
It appears to load as usual by loading sddm logging screen, but when I put my credentials I get a blank screen.

Any hints about how to solve it?

Edit: dmesg

[    0.000000] microcode: CPU0 microcode updated early to revision 0x7, date = 2013-08-20
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.5-1-ARCH (builduser@tobias) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015
[    0.000000] Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201511 initrd=boot/intel_ucode.img,boot/x86_64/archiso.img
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dfe6ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dfe70000-0x00000000dfe87fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000dfe88000-0x00000000dfedbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dfedc000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P7P55D PRO, BIOS 2101    09/27/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdfe70 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[    0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[    0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
[    0.000000]  [mem 0x21fe00000-0x21fffffff] page 2M
[    0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21fdfffff]
[    0.000000]  [mem 0x200000000-0x21fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdfe6ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdfe6ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[    0.000000] BRK [0x01b3b000, 0x01b3bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x7e92e000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB970 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000DFE70000 000044 (v01 092712 RSDT2113 20120927 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000DFE70200 000084 (v01 092712 FACP2113 20120927 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000DFE704A0 00EFF9 (v01 A1325  A1325001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000DFE88000 000040
[    0.000000] ACPI: APIC 0x00000000DFE70390 0000CC (v01 092712 APIC2113 20120927 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000DFE70460 00003C (v01 092712 OEMMCFG  20120927 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000DFE88040 000072 (v01 092712 OEMB2113 20120927 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DFE7F4A0 000038 (v01 092712 OEMHPET  20120927 MSFT 00000097)
[    0.000000] ACPI: ASPT 0x00000000DFE7F740 000034 (v06 092712 PerfTune 20120927 MSFT 00000097)
[    0.000000] ACPI: OSFR 0x00000000DFE7F780 0000B0 (v01 092712 OEMOSFR  20120927 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DFE891F0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21fff6000-0x21fff9fff]
[    0.000000]  [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dfe6ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fffffff]
[    0.000000] On node 0 totalpages: 2096654
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14266 pages used for memmap
[    0.000000]   DMA32 zone: 913008 pages, LIFO batch:31
[    0.000000]   Normal zone: 18432 pages used for memmap
[    0.000000]   Normal zone: 1179648 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfe70000-0xdfe87fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfe88000-0xdfedbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfedc000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88021fc00000 s91480 r8192 d31400 u131072
[    0.000000] pcpu-alloc: s91480 r8192 d31400 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2063871
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201511 initrd=boot/intel_ucode.img,boot/x86_64/archiso.img
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8152200K/8386616K available (5611K kernel code, 922K rwdata, 1768K rodata, 1180K init, 1152K bss, 234416K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
[    0.000000] NR_IRQS:8448 nr_irqs:552 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2674.843 MHz processor
[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5351.58 BogoMIPS (lpj=8916143)
[    0.000033] pid_max: default: 32768 minimum: 301
[    0.000038] ACPI: Core revision 20150619
[    0.009439] ACPI: All ACPI Tables successfully acquired
[    0.009462] Security Framework initialized
[    0.009465] Yama: becoming mindful.
[    0.009981] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.011515] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012163] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012173] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012394] Initializing cgroup subsys blkio
[    0.012397] Initializing cgroup subsys memory
[    0.012405] Initializing cgroup subsys devices
[    0.012407] Initializing cgroup subsys freezer
[    0.012409] Initializing cgroup subsys net_cls
[    0.012426] CPU: Physical Processor ID: 0
[    0.012427] CPU: Processor Core ID: 0
[    0.012431] mce: CPU supports 9 MCE banks
[    0.012439] CPU0: Thermal monitoring enabled (TM1)
[    0.012445] process: using mwait in idle threads
[    0.012448] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.012449] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.012706] Freeing SMP alternatives memory: 20K (ffffffff81a0f000 - ffffffff81a14000)
[    0.117159] ftrace: allocating 22161 entries in 87 pages
[    0.126985] Switched APIC routing to physical flat.
[    0.127372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.264457] smpboot: CPU0: Intel(R) Core(TM) i5 CPU         750  @ 2.67GHz (fam: 06, model: 1e, stepping: 05)
[    0.264476] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
[    0.264492] perf_event_intel: CPU erratum AAJ80 worked around
[    0.264493] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.264495] ... version:                3
[    0.264495] ... bit width:              48
[    0.264496] ... generic registers:      4
[    0.264497] ... value mask:             0000ffffffffffff
[    0.264498] ... max period:             000000007fffffff
[    0.264499] ... fixed-purpose events:   3
[    0.264500] ... event mask:             000000070000000f
[    0.277838] x86: Booting SMP configuration:
[    0.277840] .... node  #0, CPUs:        #1
[    0.279200] microcode: CPU1 microcode updated early to revision 0x7, date = 2013-08-20
[    0.281531] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.284509]   #2
[    0.285870] microcode: CPU2 microcode updated early to revision 0x7, date = 2013-08-20
[    0.291179]   #3
[    0.292537] microcode: CPU3 microcode updated early to revision 0x7, date = 2013-08-20
[    0.294627] x86: Booted up 1 node, 4 CPUs
[    0.294630] smpboot: Total of 4 processors activated (21407.35 BogoMIPS)
[    0.297427] devtmpfs: initialized
[    0.300110] PM: Registering ACPI NVS region [mem 0xdfe88000-0xdfedbfff] (344064 bytes)
[    0.300187] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.300259] pinctrl core: initialized pinctrl subsystem
[    0.300301] RTC time: 10:59:08, date: 11/26/15
[    0.300405] NET: Registered protocol family 16
[    0.311147] cpuidle: using governor ladder
[    0.324485] cpuidle: using governor menu
[    0.324528] ACPI: bus type PCI registered
[    0.324529] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.324593] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.324595] PCI: not using MMCONFIG
[    0.324596] PCI: Using configuration type 1 for base access
[    0.338095] ACPI: Added _OSI(Module Device)
[    0.338097] ACPI: Added _OSI(Processor Device)
[    0.338098] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.338099] ACPI: Added _OSI(Processor Aggregator Device)
[    0.340326] ACPI: Executed 1 blocks of module-level executable AML code
[    0.346227] ACPI: Dynamic OEM Table Load:
[    0.346235] ACPI: SSDT 0xFFFF880216152000 001130 (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.346808] ACPI : EC: EC started
[    0.346896] ACPI: Interpreter enabled
[    0.346904] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[    0.346917] ACPI: (supports S0 S1 S3 S4 S5)
[    0.346918] ACPI: Using IOAPIC for interrupt routing
[    0.346934] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.347949] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.347954] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.348082] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.353824] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.353829] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.353984] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.354060] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.354063] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.354065] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.354066] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.354128] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.354279] PCI host bridge to bus 0000:00
[    0.354282] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.354284] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.354285] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.354287] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.354289] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.354290] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.354292] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff window]
[    0.354300] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000
[    0.354398] pci 0000:00:05.0: [8086:d13a] type 01 class 0x060400
[    0.354441] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.354479] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.354518] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000
[    0.354609] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000
[    0.354698] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000
[    0.354786] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000
[    0.354871] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000
[    0.354950] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000
[    0.355045] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.355072] pci 0000:00:1a.0: reg 0x10: [mem 0xf5ffe000-0xf5ffe3ff]
[    0.355134] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.355173] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.355211] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.355235] pci 0000:00:1b.0: reg 0x10: [mem 0xf5ff8000-0xf5ffbfff 64bit]
[    0.355288] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.355359] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.355410] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.355449] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.355488] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.355544] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.355582] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.355618] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.355669] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.355708] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.355744] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
[    0.355800] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.355838] pci 0000:00:1c.6: System wakeup disabled by ACPI
[    0.355875] pci 0000:00:1c.7: [8086:3b50] type 01 class 0x060400
[    0.355931] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.355969] pci 0000:00:1c.7: System wakeup disabled by ACPI
[    0.356007] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.356034] pci 0000:00:1d.0: reg 0x10: [mem 0xf5ffd000-0xf5ffd3ff]
[    0.356096] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.356136] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.356170] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.356243] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.356280] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100
[    0.356433] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018f
[    0.356452] pci 0000:00:1f.2: reg 0x10: [io  0x9c00-0x9c07]
[    0.356459] pci 0000:00:1f.2: reg 0x14: [io  0x9880-0x9883]
[    0.356466] pci 0000:00:1f.2: reg 0x18: [io  0x9800-0x9807]
[    0.356473] pci 0000:00:1f.2: reg 0x1c: [io  0x9480-0x9483]
[    0.356479] pci 0000:00:1f.2: reg 0x20: [io  0x9400-0x940f]
[    0.356486] pci 0000:00:1f.2: reg 0x24: [io  0x9080-0x908f]
[    0.356566] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.356581] pci 0000:00:1f.3: reg 0x10: [mem 0xf5ffc000-0xf5ffc0ff 64bit]
[    0.356600] pci 0000:00:1f.3: reg 0x20: [io  0xffe0-0xffff]
[    0.356674] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
[    0.356693] pci 0000:00:1f.5: reg 0x10: [io  0xac00-0xac07]
[    0.356700] pci 0000:00:1f.5: reg 0x14: [io  0xa880-0xa883]
[    0.356707] pci 0000:00:1f.5: reg 0x18: [io  0xa800-0xa807]
[    0.356714] pci 0000:00:1f.5: reg 0x1c: [io  0xa480-0xa483]
[    0.356721] pci 0000:00:1f.5: reg 0x20: [io  0xa400-0xa40f]
[    0.356728] pci 0000:00:1f.5: reg 0x24: [io  0xa080-0xa08f]
[    0.356843] pci 0000:01:00.0: [10de:1401] type 00 class 0x030000
[    0.356865] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.356876] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.356887] pci 0000:01:00.0: reg 0x1c: [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.356894] pci 0000:01:00.0: reg 0x24: [io  0xbc00-0xbc7f]
[    0.356902] pci 0000:01:00.0: reg 0x30: [mem 0xf7b00000-0xf7b7ffff pref]
[    0.356980] pci 0000:01:00.1: [10de:0fba] type 00 class 0x040300
[    0.357001] pci 0000:01:00.1: reg 0x10: [mem 0xf7bfc000-0xf7bfffff]
[    0.361180] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.361184] pci 0000:00:05.0:   bridge window [io  0xb000-0xbfff]
[    0.361186] pci 0000:00:05.0:   bridge window [mem 0xf6000000-0xf7bfffff]
[    0.361190] pci 0000:00:05.0:   bridge window [mem 0xe0000000-0xf3ffffff 64bit pref]
[    0.361230] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.361291] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[    0.361342] pci 0000:05:00.0: reg 0x10: [mem 0xf7efe000-0xf7efffff 64bit]
[    0.361450] pci 0000:05:00.0: PME# supported from D0 D3hot
[    0.367852] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.367857] pci 0000:00:1c.4:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.367900] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.367972] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[    0.368073] pci 0000:03:00.0: reg 0x24: [mem 0xf7dfe000-0xf7dfffff]
[    0.368116] pci 0000:03:00.0: PME# supported from D3hot
[    0.368175] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.368204] pci 0000:03:00.1: reg 0x10: [io  0xdc00-0xdc07]
[    0.368214] pci 0000:03:00.1: reg 0x14: [io  0xd880-0xd883]
[    0.368223] pci 0000:03:00.1: reg 0x18: [io  0xd800-0xd807]
[    0.368233] pci 0000:03:00.1: reg 0x1c: [io  0xd480-0xd483]
[    0.368243] pci 0000:03:00.1: reg 0x20: [io  0xd400-0xd40f]
[    0.368329] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.368338] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.368341] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.368345] pci 0000:00:1c.6:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.368400] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.368438] pci 0000:02:00.0: reg 0x10: [io  0xc800-0xc8ff]
[    0.368464] pci 0000:02:00.0: reg 0x18: [mem 0xf4fff000-0xf4ffffff 64bit pref]
[    0.368481] pci 0000:02:00.0: reg 0x20: [mem 0xf4ff8000-0xf4ffbfff 64bit pref]
[    0.368492] pci 0000:02:00.0: reg 0x30: [mem 0xf7cf0000-0xf7cfffff pref]
[    0.368538] pci 0000:02:00.0: supports D1 D2
[    0.368539] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.374519] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.374523] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.374526] pci 0000:00:1c.7:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.374531] pci 0000:00:1c.7:   bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
[    0.374570] pci 0000:07:03.0: [1106:3044] type 00 class 0x0c0010
[    0.374592] pci 0000:07:03.0: reg 0x10: [mem 0xf7fff800-0xf7ffffff]
[    0.374601] pci 0000:07:03.0: reg 0x14: [io  0xec00-0xec7f]
[    0.374658] pci 0000:07:03.0: supports D2
[    0.374659] pci 0000:07:03.0: PME# supported from D2 D3hot D3cold
[    0.374726] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.374729] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.374733] pci 0000:00:1e.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.374738] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.374739] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.374741] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.374743] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.374744] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[    0.374746] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfed8ffff window] (subtractive decode)
[    0.375360] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.375404] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.375446] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.375489] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.375532] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.375575] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.375619] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.375662] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.375705] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.375737] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[    0.375818] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.375820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.375821] vgaarb: loaded
[    0.375822] vgaarb: bridge control possible 0000:01:00.0
[    0.375896] PCI: Using ACPI for IRQ routing
[    0.377147] PCI: Discovered peer bus 3f
[    0.377148] PCI: root bus 3f: using default resources
[    0.377149] PCI: Probing PCI hardware (bus 3f)
[    0.377174] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.377175] PCI host bridge to bus 0000:3f
[    0.377177] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    0.377179] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[    0.377181] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[    0.377183] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.377188] pci 0000:3f:00.0: [8086:2c51] type 00 class 0x060000
[    0.377228] pci 0000:3f:00.1: [8086:2c81] type 00 class 0x060000
[    0.377269] pci 0000:3f:02.0: [8086:2c90] type 00 class 0x060000
[    0.377307] pci 0000:3f:02.1: [8086:2c91] type 00 class 0x060000
[    0.377346] pci 0000:3f:03.0: [8086:2c98] type 00 class 0x060000
[    0.377383] pci 0000:3f:03.1: [8086:2c99] type 00 class 0x060000
[    0.377420] pci 0000:3f:03.4: [8086:2c9c] type 00 class 0x060000
[    0.377458] pci 0000:3f:04.0: [8086:2ca0] type 00 class 0x060000
[    0.377496] pci 0000:3f:04.1: [8086:2ca1] type 00 class 0x060000
[    0.377532] pci 0000:3f:04.2: [8086:2ca2] type 00 class 0x060000
[    0.377569] pci 0000:3f:04.3: [8086:2ca3] type 00 class 0x060000
[    0.377608] pci 0000:3f:05.0: [8086:2ca8] type 00 class 0x060000
[    0.377644] pci 0000:3f:05.1: [8086:2ca9] type 00 class 0x060000
[    0.377681] pci 0000:3f:05.2: [8086:2caa] type 00 class 0x060000
[    0.377718] pci 0000:3f:05.3: [8086:2cab] type 00 class 0x060000
[    0.377764] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[    0.377766] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.377770] PCI: pci_cache_line_size set to 64 bytes
[    0.377839] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.377845] e820: reserve RAM buffer [mem 0xdfe70000-0xdfffffff]
[    0.377941] NetLabel: Initializing
[    0.377943] NetLabel:  domain hash size = 128
[    0.377943] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.377955] NetLabel:  unlabeled traffic allowed by default
[    0.377998] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    0.378004] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
[    0.378009] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.380040] hpet: hpet2 irq 24 for MSI
[    0.380075] hpet: hpet3 irq 25 for MSI
[    0.380115] hpet: hpet4 irq 26 for MSI
[    0.380151] hpet: hpet5 irq 27 for MSI
[    0.380180] clocksource: Switched to clocksource hpet
[    0.385030] pnp: PnP ACPI init
[    0.385091] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.385095] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.385142] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.385300] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.385303] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.385477] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.385479] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.385481] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.385483] system 00:03: [io  0x0600-0x0607] has been reserved
[    0.385485] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.385487] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.385489] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.385492] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.385583] system 00:04: [mem 0xffc00000-0xffdfffff] has been reserved
[    0.385587] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.385741] pnp 00:05: [dma 0 disabled]
[    0.385797] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.385886] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.385889] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.385891] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.385972] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.385976] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.386128] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.386131] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.386132] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.386134] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.386136] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.386139] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.386235] pnp: PnP ACPI: found 9 devices
[    0.392779] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.392798] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 06] add_size 1000
[    0.392801] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[    0.392803] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000
[    0.392810] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 05] add_size 1000
[    0.392812] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[    0.392819] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.392821] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.392823] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.392831] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.392848] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.392850] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.392852] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.392854] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.392856] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.392858] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.392860] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.392862] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.392864] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.392866] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.392868] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.392870] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.392872] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.392874] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.392876] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.392878] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.392879] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.392881] pci 0000:00:1c.5: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.392885] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4000000-0xf41fffff]
[    0.392890] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.392893] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
[    0.392896] pci 0000:00:1c.5: BAR 14: assigned [mem 0xf4600000-0xf47fffff]
[    0.392899] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf4800000-0xf49fffff 64bit pref]
[    0.392903] pci 0000:00:1c.6: BAR 15: assigned [mem 0xf4a00000-0xf4bfffff 64bit pref]
[    0.392905] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.392907] pci 0000:00:1c.4: BAR 13: assigned [io  0x2000-0x2fff]
[    0.392909] pci 0000:00:1c.5: BAR 13: assigned [io  0x3000-0x3fff]
[    0.392913] pci 0000:00:05.0: PCI bridge to [bus 01]
[    0.392915] pci 0000:00:05.0:   bridge window [io  0xb000-0xbfff]
[    0.392918] pci 0000:00:05.0:   bridge window [mem 0xf6000000-0xf7bfffff]
[    0.392921] pci 0000:00:05.0:   bridge window [mem 0xe0000000-0xf3ffffff 64bit pref]
[    0.392925] pci 0000:00:1c.0: PCI bridge to [bus 06]
[    0.392927] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.392931] pci 0000:00:1c.0:   bridge window [mem 0xf4000000-0xf41fffff]
[    0.392935] pci 0000:00:1c.0:   bridge window [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.392939] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.392942] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.392945] pci 0000:00:1c.4:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.392949] pci 0000:00:1c.4:   bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
[    0.392953] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.392956] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.392960] pci 0000:00:1c.5:   bridge window [mem 0xf4600000-0xf47fffff]
[    0.392963] pci 0000:00:1c.5:   bridge window [mem 0xf4800000-0xf49fffff 64bit pref]
[    0.392968] pci 0000:00:1c.6: PCI bridge to [bus 03]
[    0.392970] pci 0000:00:1c.6:   bridge window [io  0xd000-0xdfff]
[    0.392974] pci 0000:00:1c.6:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.392977] pci 0000:00:1c.6:   bridge window [mem 0xf4a00000-0xf4bfffff 64bit pref]
[    0.392982] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.392984] pci 0000:00:1c.7:   bridge window [io  0xc000-0xcfff]
[    0.392988] pci 0000:00:1c.7:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.392991] pci 0000:00:1c.7:   bridge window [mem 0xf4f00000-0xf4ffffff 64bit pref]
[    0.392996] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.392998] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.393002] pci 0000:00:1e.0:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.393009] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.393011] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.393013] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.393014] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.393016] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window]
[    0.393018] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff window]
[    0.393019] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
[    0.393021] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf7bfffff]
[    0.393023] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf3ffffff 64bit pref]
[    0.393024] pci_bus 0000:06: resource 0 [io  0x1000-0x1fff]
[    0.393026] pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf41fffff]
[    0.393027] pci_bus 0000:06: resource 2 [mem 0xf4200000-0xf43fffff 64bit pref]
[    0.393029] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.393031] pci_bus 0000:05: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.393032] pci_bus 0000:05: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
[    0.393034] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.393035] pci_bus 0000:04: resource 1 [mem 0xf4600000-0xf47fffff]
[    0.393037] pci_bus 0000:04: resource 2 [mem 0xf4800000-0xf49fffff 64bit pref]
[    0.393039] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.393040] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.393042] pci_bus 0000:03: resource 2 [mem 0xf4a00000-0xf4bfffff 64bit pref]
[    0.393043] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.393045] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.393047] pci_bus 0000:02: resource 2 [mem 0xf4f00000-0xf4ffffff 64bit pref]
[    0.393048] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
[    0.393050] pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.393051] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.393053] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.393055] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.393056] pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.393058] pci_bus 0000:07: resource 8 [mem 0xe0000000-0xf7ffffff window]
[    0.393060] pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff window]
[    0.393062] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
[    0.393064] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[    0.393094] NET: Registered protocol family 2
[    0.393263] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.393465] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.393753] TCP: Hash tables configured (established 65536 bind 65536)
[    0.393784] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.393842] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.393942] NET: Registered protocol family 1
[    0.394262] pci 0000:01:00.0: Video device with shadowed ROM
[    0.394275] pci 0000:00:1c.4: enabling device (0106 -> 0107)
[    0.394396] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[    0.394400] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[    0.394422] PCI: CLS 32 bytes, default 64
[    0.394463] Unpacking initramfs...
[    2.893752] Freeing initrd memory: 23368K (ffff88007e92e000 - ffff880080000000)
[    2.893762] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.893764] software IO TLB [mem 0xdbe70000-0xdfe70000] (64MB) mapped at [ffff8800dbe70000-ffff8800dfe6ffff]
[    2.893886] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x7
[    2.893894] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x7
[    2.893900] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x7
[    2.893905] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x7
[    2.893959] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    2.894033] Scanning for low memory corruption every 60 seconds
[    2.894394] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    2.894436] Initialise system trusted keyring
[    2.894722] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.896124] zpool: loaded
[    2.896126] zbud: loaded
[    2.896289] VFS: Disk quotas dquot_6.6.0
[    2.896326] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.896470] Key type big_key registered
[    2.896584] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    2.896616] io scheduler noop registered
[    2.896619] io scheduler deadline registered
[    2.896649] io scheduler cfq registered (default)
[    2.896850] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    2.896968] pcieport 0000:00:1c.5: enabling device (0104 -> 0107)
[    2.897245] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.897253] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.897267] intel_idle: MWAIT substates: 0x1120
[    2.897271] intel_idle: v0.4 model 0x1E
[    2.897272] intel_idle: lapic_timer_reliable_states 0x2
[    2.897419] GHES: HEST is not enabled!
[    2.897473] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.918039] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.918679] Linux agpgart interface v0.103
[    2.919052] rtc_cmos 00:01: RTC can wake from S4
[    2.919254] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.919281] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    2.919301] ledtrig-cpu: registered to indicate activity on CPUs
[    2.920017] NET: Registered protocol family 10
[    2.920392] NET: Registered protocol family 17
[    2.921198] Loading compiled-in X.509 certificates
[    2.921220] registered taskstats version 1
[    2.921235] zswap: loading zswap
[    2.921239] zswap: using zbud pool
[    2.921247] zswap: using lzo compressor
[    2.922226]   Magic number: 7:487:983
[    2.922251] platform PNP0C14:00: hash matches
[    2.922268] acpi PNP0C14:00: hash matches
[    2.922393] rtc_cmos 00:01: setting system clock to 2015-11-26 10:59:10 UTC (1448535550)
[    2.922436] PM: Hibernation image not present or could not be loaded.
[    2.923025] Freeing unused kernel memory: 1180K (ffffffff818e8000 - ffffffff81a0f000)
[    2.923027] Write protecting the kernel read-only data: 8192k
[    2.923714] Freeing unused kernel memory: 520K (ffff88000157e000 - ffff880001600000)
[    2.923908] Freeing unused kernel memory: 280K (ffff8800017ba000 - ffff880001800000)
[    2.931473] random: systemd-tmpfile urandom read with 22 bits of entropy available
[    2.957268] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.957272] ACPI: Power Button [PWRB]
[    2.957316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.957318] ACPI: Power Button [PWRF]
[    2.957831] wmi: Mapper loaded
[    2.959685] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    2.962639] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.962678] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.964574] [drm] Initialized drm 1.1.0 20060810
[    2.965109] ACPI: bus type USB registered
[    2.965130] usbcore: registered new interface driver usbfs
[    2.965141] usbcore: registered new interface driver hub
[    2.965286] usbcore: registered new device driver usb
[    2.966177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.966458] ehci-pci: EHCI PCI platform driver
[    2.966587] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    2.966592] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.966603] ehci-pci 0000:00:1a.0: debug port 2
[    2.970515] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[    2.970531] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf5ffe000
[    2.970985] SCSI subsystem initialized
[    2.974754] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.974763] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.974880] libata version 3.00 loaded.
[    2.975072] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    2.975124] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc9000001e000, 00:26:18:9c:ba:13, XID 083000c0 IRQ 29
[    2.975127] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.976071] scsi host0: pata_jmicron
[    2.976156] scsi host1: pata_jmicron
[    2.976195] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[    2.976196] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[    2.976296] ahci 0000:03:00.0: version 3.0
[    2.977653] MXM: GUID detected in BIOS
[    2.978169] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.978227] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x126010a1
[    2.978230] nouveau  [  DEVICE][0000:01:00.0] Chipset: GM206 (NV126)
[    2.978231] nouveau  [  DEVICE][0000:01:00.0] Family : NV110
[    2.978330] hub 1-0:1.0: USB hub found
[    2.978337] hub 1-0:1.0: 2 ports detected
[    2.978530] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    2.978536] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[    2.988202] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    2.988206] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    2.988474] scsi host2: ahci
[    2.988557] scsi host3: ahci
[    2.988606] ata3: SATA max UDMA/133 abar m8192@0xf7dfe000 port 0xf7dfe100 irq 18
[    2.988609] ata4: SATA max UDMA/133 abar m8192@0xf7dfe000 port 0xf7dfe180 irq 18
[    3.034993] firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    3.059894] nouveau  [   VBIOS][0000:01:00.0] using image from PROM
[    3.060202] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    3.060204] nouveau  [   VBIOS][0000:01:00.0] version 84.06.0d.00.02
[    3.060600] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    3.060631] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[    3.060632] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[    3.060634] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    3.084131] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[    3.084438] hub 2-0:1.0: USB hub found
[    3.084447] hub 2-0:1.0: 2 ports detected
[    3.084542] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    3.084547] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    3.084557] ehci-pci 0000:00:1d.0: debug port 2
[    3.088459] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[    3.088465] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    3.088468] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf5ffd000
[    3.088469] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    3.088504] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.088730] hub 4-0:1.0: USB hub found
[    3.088743] hub 4-0:1.0: 2 ports detected
[    3.098350] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    3.098612] hub 3-0:1.0: USB hub found
[    3.098621] hub 3-0:1.0: 2 ports detected
[    3.098723] ata_piix 0000:00:1f.2: version 2.13
[    3.098802] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    3.099726] scsi host4: ata_piix
[    3.099927] scsi host5: ata_piix
[    3.099982] ata5: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
[    3.099986] ata6: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
[    3.100064] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    3.100807] scsi host6: ata_piix
[    3.100951] scsi host7: ata_piix
[    3.100999] ata7: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
[    3.101002] ata8: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
[    3.147439] nouveau  [  PGRAPH][0000:01:00.0] using external firmware
[    3.147455] nouveau 0000:01:00.0: Direct firmware load for nouveau/nv126_fuc409c failed with error -2
[    3.147463] nouveau 0000:01:00.0: Direct firmware load for nouveau/fuc409c failed with error -2
[    3.147465] nouveau E[  PGRAPH][0000:01:00.0] failed to load fuc409c
[    3.147774] [TTM] Zone  kernel: Available graphics memory: 4088784 kiB
[    3.147779] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    3.147781] [TTM] Initializing pool allocator
[    3.147794] [TTM] Initializing DMA pool allocator
[    3.147813] nouveau  [     DRM] VRAM: 2048 MiB
[    3.147816] nouveau  [     DRM] GART: 1048576 MiB
[    3.147821] nouveau  [     DRM] TMDS table version 2.0
[    3.147825] nouveau  [     DRM] DCB version 4.1
[    3.147828] nouveau  [     DRM] DCB outp 00: 01000f02 00020030
[    3.147832] nouveau  [     DRM] DCB outp 01: 02000f00 00000000
[    3.147835] nouveau  [     DRM] DCB outp 02: 04011f82 00020010
[    3.147838] nouveau  [     DRM] DCB outp 03: 02822f66 04400010
[    3.147841] nouveau  [     DRM] DCB outp 04: 02022f62 00020010
[    3.147844] nouveau  [     DRM] DCB outp 05: 02833f76 04400020
[    3.147847] nouveau  [     DRM] DCB outp 06: 02033f72 00020020
[    3.147850] nouveau  [     DRM] DCB outp 07: 04844f96 04400020
[    3.147853] nouveau  [     DRM] DCB outp 08: 04044f92 00020020
[    3.147857] nouveau  [     DRM] DCB outp 15: 01df5ff8 00000000
[    3.147860] nouveau  [     DRM] DCB conn 00: 00001030
[    3.147863] nouveau  [     DRM] DCB conn 01: 01000161
[    3.147867] nouveau  [     DRM] DCB conn 02: 00010246
[    3.147869] nouveau  [     DRM] DCB conn 03: 00020346
[    3.147872] nouveau  [     DRM] DCB conn 04: 02000446
[    3.147875] nouveau  [     DRM] DCB conn 05: 00000570
[    3.147879] nouveau E[     DRM] Pointer to flat panel table invalid
[    3.149109] nouveau W[     DRM] unknown connector type 70
[    3.149140] nouveau W[     DRM] failed to create encoder 1/8/0: -19
[    3.149141] nouveau W[     DRM] Unknown-1 has no encoders, removing
[    3.149166] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.149167] [drm] Driver supports precise vblank timestamp query.
[    3.163029] nouveau E[   PFIFO][0000:01:00.0] unsupported engines 0x00000001
[    3.163189] nouveau E[     DRM] failed to create kernel channel, -22
[    3.284977] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.308450] ata3: SATA link down (SStatus 0 SControl 300)
[    3.311728] ata4: SATA link down (SStatus 0 SControl 300)
[    3.398745] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    3.405032] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    3.415731] hub 1-1:1.0: USB hub found
[    3.415831] hub 1-1:1.0: 6 ports detected
[    3.429337] usb-storage 4-2:1.0: USB Mass Storage device detected
[    3.429350] ata7: SATA link down (SStatus 0 SControl 300)
[    3.429564] usb-storage 4-2:1.0: Quirks match for vid 13fd pid 3940: 2000000
[    3.429599] scsi host8: usb-storage 4-2:1.0
[    3.429668] usbcore: registered new interface driver usb-storage
[    3.430081] usbcore: registered new interface driver uas
[    3.458737] nouveau  [     DRM] allocated 1920x1080 fb: 0x60000, bo ffff8800dbafc000
[    3.458838] fbcon: nouveaufb (fb0) is primary device
[    3.529111] hub 3-1:1.0: USB hub found
[    3.529292] hub 3-1:1.0: 8 ports detected
[    3.535243] firewire_core 0000:07:03.0: created device fw0: GUID 001e8c0001fee812, S400
[    3.581948] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.588936] ata8.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7
[    3.588938] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.610549] random: nonblocking pool is initialized
[    3.612228] ata8.00: configured for UDMA/133
[    3.681900] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    3.749556] ata6.00: SATA link down (SStatus 0 SControl 300)
[    3.749568] ata6.01: SATA link down (SStatus 0 SControl 300)
[    3.795290] usb 3-1.1: new high-speed USB device number 3 using ehci-pci
[    3.882245] usb-storage 3-1.1:1.0: USB Mass Storage device detected
[    3.882332] scsi host9: usb-storage 3-1.1:1.0
[    3.892094] tsc: Refined TSC clocksource calibration: 2674.964 MHz
[    3.892096] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x268edbd01c4, max_idle_ns: 440795274690 ns
[    3.902118] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.902129] ata5.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.915724] ata5.00: ATA-9: M4-CT064M4SSD2, 0309, max UDMA/100
[    3.915725] ata5.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.915729] ata5.01: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL01, max UDMA/100
[    3.922425] ata5.00: configured for UDMA/100
[    3.935609] ata5.01: configured for UDMA/100
[    3.941334] scsi 4:0:0:0: Direct-Access     ATA      M4-CT064M4SSD2   0309 PQ: 0 ANSI: 5
[    3.945093] scsi 4:0:1:0: CD-ROM            HL-DT-ST DVDRAM GH22LS50  TL01 PQ: 0 ANSI: 5
[    3.945317] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    3.948668] usb 3-1.7: new high-speed USB device number 4 using ehci-pci
[    3.957524] scsi 7:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1118 PQ: 0 ANSI: 5
[    3.959345] sd 4:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    3.959374] sd 7:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.959400] sd 4:0:0:0: [sda] Write Protect is off
[    3.959402] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.959413] sd 7:0:0:0: [sdb] Write Protect is off
[    3.959415] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.959419] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.959432] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.980030] sr 4:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.980031] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.980226] sr 4:0:1:0: Attached scsi CD-ROM sr0
[    3.990200] Console: switching to colour frame buffer device 240x67
[    3.994385]  sdb: sdb1 sdb2 sdb3
[    3.994915] sd 7:0:0:0: [sdb] Attached SCSI disk
[    3.996984] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    3.996986] nouveau 0000:01:00.0: registered panic notifier
[    4.012177] [drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on minor 0
[    4.017248]  sda: sda1 sda2 sda3
[    4.017741] sd 4:0:0:0: [sda] Attached SCSI disk
[    4.036948] hidraw: raw HID events driver (C) Jiri Kosina
[    4.048316] usbcore: registered new interface driver usbhid
[    4.048318] usbhid: USB HID core driver
[    4.049367] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:07A5.0001/input/input4
[    4.102383] hid-generic 0003:045E:07A5.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0] on usb-0000:00:1a.0-1.4/input0
[    4.102651] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:045E:07A5.0002/input/input5
[    4.102849] hid-generic 0003:045E:07A5.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0] on usb-0000:00:1a.0-1.4/input1
[    4.115111] input: Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:045E:07A5.0003/input/input6
[    4.165714] hid-generic 0003:045E:07A5.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae 2.4GHz Transceiver v9.0] on usb-0000:00:1a.0-1.4/input2
[    4.431596] scsi 8:0:0:0: Direct-Access     Initio   INIC-3609        0211 PQ: 0 ANSI: 6
[    4.432322] sd 8:0:0:0: [sdc] 976773167 512-byte logical blocks: (500 GB/465 GiB)
[    4.432934] sd 8:0:0:0: [sdc] Write Protect is off
[    4.432941] sd 8:0:0:0: [sdc] Mode Sense: 1f 00 10 08
[    4.433685] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.778339]  sdc:
[    4.779965] sd 8:0:0:0: [sdc] Attached SCSI disk
[    4.883845] scsi 9:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 0 CCS
[    4.885148] sd 9:0:0:0: [sdd] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB)
[    4.886050] sd 9:0:0:0: [sdd] Write Protect is off
[    4.886057] sd 9:0:0:0: [sdd] Mode Sense: 43 00 00 00
[    4.887040] sd 9:0:0:0: [sdd] No Caching mode page found
[    4.887093] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[    4.891806]  sdd: sdd1 sdd2
[    4.892507] clocksource: Switched to clocksource tsc
[    4.895183] sd 9:0:0:0: [sdd] Attached SCSI removable disk
[    5.973225] floppy0: no floppy controllers found
[    5.973239] work still pending
[    6.084299] ISO 9660 Extensions: RRIP_1991A
[    6.091188] loop: module loaded
[    6.219101] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    6.767822] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.782932] systemd[1]: systemd 227 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[    6.783061] systemd[1]: Detected architecture x86-64.
[    6.799032] systemd[1]: Set hostname to <archiso>.
[    6.799669] systemd[1]: Initializing machine ID from random generator.
[    7.084928] systemd[1]: run-archiso-sfs-airootfs.mount: Unit is bound to inactive unit dev-loop0.device. Stopping, too.
[    7.084953] systemd[1]: run-archiso-bootmnt.mount: Unit is bound to inactive unit dev-sdd1.device. Stopping, too.
[    7.093711] systemd[1]: Reached target Encrypted Volumes.
[    7.093882] systemd[1]: Listening on Journal Socket.
[    7.094227] systemd[1]: Created slice User and Session Slice.
[    7.094432] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.094561] systemd[1]: Listening on udev Kernel Socket.
[    7.094650] systemd[1]: Reached target Swap.
[    7.094749] systemd[1]: Listening on udev Control Socket.
[    7.094853] systemd[1]: Listening on LVM2 metadata daemon socket.
[    7.094945] systemd[1]: Reached target Remote File Systems.
[    7.095046] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.095222] systemd[1]: Created slice System Slice.
[    7.095669] systemd[1]: Starting Setup Virtual Console...
[    7.097372] systemd[1]: Mounting POSIX Message Queue File System...
[    7.098519] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.098657] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.098870] systemd[1]: Created slice system-getty.slice.
[    7.098981] systemd[1]: Reached target Slices.
[    7.099105] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.101768] systemd[1]: Starting Load Kernel Modules...
[    7.102228] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.131493] systemd[1]: Starting Journal Service...
[    7.131957] systemd[1]: Mounting Debug File System...
[    7.132401] systemd[1]: Mounting Huge Pages File System...
[    7.132472] systemd[1]: Reached target Paths.
[    7.133349] systemd[1]: Mounting Temporary Directory...
[    7.133452] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.133578] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    7.135547] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.170215] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.171185] systemd[1]: Starting Rebuild Dynamic Linker Cache...
[    7.171641] systemd[1]: Starting Load/Save Random Seed...
[    7.173485] systemd[1]: Starting Rebuild Hardware Database...
[    7.173961] systemd[1]: Starting Create System Users...
[    7.180205] systemd[1]: Started Load/Save Random Seed.
[    7.207849] systemd[1]: Started Create System Users.
[    7.210443] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.218292] FS-Cache: Loaded
[    7.335775] RPC: Registered named UNIX socket transport module.
[    7.335779] RPC: Registered udp transport module.
[    7.335780] RPC: Registered tcp transport module.
[    7.335781] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    7.339041] systemd[1]: Started Journal Service.
[    7.395254] systemd-journald[222]: Received request to flush runtime journal from PID 1
[    7.412273] FS-Cache: Netfs 'nfs' registered for caching
[    8.017713] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.122438] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    8.186601] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    8.192629] ATK0110 ATK0110:00: EC enabled
[    8.219524] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150619/utaddress-254)
[    8.219530] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.219533] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20150619/utaddress-254)
[    8.219536] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150619/utaddress-254)
[    8.219539] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.219540] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS1) (20150619/utaddress-254)
[    8.219543] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPS0) (20150619/utaddress-254)
[    8.219546] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.219567] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.356998] mousedev: PS/2 mouse device common for all mice
[    8.382556] media: Linux media interface: v0.10
[    8.392090] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    8.507182] Linux video capture interface: v2.00
[    8.508169] Bluetooth: Core ver 2.20
[    8.508178] NET: Registered protocol family 31
[    8.508180] Bluetooth: HCI device and connection manager initialized
[    8.508183] Bluetooth: HCI socket layer initialized
[    8.508185] Bluetooth: L2CAP socket layer initialized
[    8.508189] Bluetooth: SCO socket layer initialized
[    8.510944] EDAC MC: Ver: 3.0.0
[    8.711041] iTCO_vendor_support: vendor-support=0
[    8.723136] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:3f:03.0 (POLLED)
[    8.723172] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:3f:03.0 (POLLED)
[    8.723178] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[    8.729779] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    8.729811] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
[    8.730550] snd_hda_intel 0000:01:00.1: Disabling MSI
[    8.730557] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[    8.738147] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    8.741769] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    8.743013] usbcore: registered new interface driver btusb
[    8.761413] gpio_ich: GPIO from 436 to 511 on gpio_ich
[    8.784650] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1828S: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line
[    8.784652] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.784653] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
[    8.784654] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[    8.784655] snd_hda_codec_via hdaudioC0D0:    dig-out=0x2d/0x2e
[    8.784656] snd_hda_codec_via hdaudioC0D0:    inputs:
[    8.784657] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x29
[    8.784658] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x2b
[    8.784659] snd_hda_codec_via hdaudioC0D0:      Line=0x2a
[    8.784660] snd_hda_codec_via hdaudioC0D0:      CD=0x2c
[    8.796271] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.796488] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.796545] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.796597] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.797286] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.797342] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    8.797395] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    8.797447] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    8.797501] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    8.954400] usb 3-1.7: current rate 0 is different from the runtime rate 16000
[    8.972563] usb 3-1.7: current rate 0 is different from the runtime rate 24000
[    8.991073] usb 3-1.7: current rate 0 is different from the runtime rate 32000
[    9.021804] usbcore: registered new interface driver snd-usb-audio
[    9.021824] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0821)
[    9.035069] input: UVC Camera (046d:0821) as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.7/3-1.7:1.2/input/input18
[    9.035221] usbcore: registered new interface driver uvcvideo
[    9.035224] USB Video Class driver (1.1.1)
[    9.827171] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:05.0/0000:01:00.1/sound/card1/input19
[    9.828170] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:05.0/0000:01:00.1/sound/card1/input20
[    9.829097] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:05.0/0000:01:00.1/sound/card1/input21
[    9.829567] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:05.0/0000:01:00.1/sound/card1/input22
[   10.127345] cfg80211: World regulatory domain updated:
[   10.127349] cfg80211:  DFS Master region: unset
[   10.127350] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   10.127352] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.127354] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   10.127355] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   10.127357] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   10.127359] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   10.127360] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   10.127362] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   10.127363] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   10.209818] r8169 0000:02:00.0 enp2s0: link down
[   10.209828] r8169 0000:02:00.0 enp2s0: link down
[   10.209863] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   11.272547] floppy0: no floppy controllers found
[   11.272561] work still pending
[   11.870323] r8169 0000:02:00.0 enp2s0: link up
[   11.870332] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[  157.248071] EXT4-fs (sda2): recovery complete
[  157.251952] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[  174.426495] EXT4-fs (sda3): recovery complete
[  174.427941] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[  186.577067] EXT4-fs (sdb2): recovery complete
[  186.591170] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)

X.org.log

[     6.220] 
X.Org X Server 1.18.0
Release Date: 2015-11-09
[     6.220] X Protocol Version 11, Revision 0
[     6.220] Build Operating System: Linux 4.2.3-1-ARCH x86_64 
[     6.220] Current Operating System: Linux Archlinux 4.2.5-1-ARCH #1 SMP PREEMPT Tue Oct 27 08:13:28 CET 2015 x86_64
[     6.220] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=30974f48-24b5-487b-9a3d-98713ccf5f5b rw quiet
[     6.220] Build Date: 18 November 2015  08:07:09AM
[     6.220]  
[     6.220] Current version of pixman: 0.32.8
[     6.220] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     6.220] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     6.220] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 26 11:46:41 2015
[     6.223] (==) Using config file: "/etc/X11/xorg.conf"
[     6.223] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     6.223] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     6.225] (==) ServerLayout "Layout0"
[     6.225] (**) |-->Screen "Screen0" (0)
[     6.225] (**) |   |-->Monitor "Monitor0"
[     6.225] (**) |   |-->Device "Device0"
[     6.225] (**) |   |-->GPUDevice "Device0"
[     6.225] (**) |-->Input Device "Keyboard0"
[     6.225] (**) |-->Input Device "Mouse0"
[     6.225] (**) Option "Xinerama" "0"
[     6.225] (==) Automatically adding devices
[     6.225] (==) Automatically enabling devices
[     6.225] (==) Automatically adding GPU devices
[     6.225] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     6.229] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[     6.229] 	Entry deleted from font path.
[     6.229] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[     6.229] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[     6.229] 	Entry deleted from font path.
[     6.229] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[     6.229] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[     6.229] (==) ModulePath set to "/usr/lib/xorg/modules"
[     6.229] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     6.229] (WW) Disabling Keyboard0
[     6.229] (WW) Disabling Mouse0
[     6.229] (II) Loader magic: 0x819d40
[     6.229] (II) Module ABI versions:
[     6.229] 	X.Org ANSI C Emulation: 0.4
[     6.229] 	X.Org Video Driver: 20.0
[     6.229] 	X.Org XInput driver : 22.1
[     6.229] 	X.Org Server Extension : 9.0
[     6.230] (++) using VT number 1

[     6.230] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     6.230] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.232] (--) PCI:*(0:1:0:0) 10de:1401:1043:8520 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[     6.232] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     6.232] (II) LoadModule: "glx"
[     6.235] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     6.342] (II) Module glx: vendor="NVIDIA Corporation"
[     6.342] 	compiled for 4.0.2, module version = 1.0.0
[     6.342] 	Module class: X.Org Server Extension
[     6.344] (II) NVIDIA GLX Module  358.16  Mon Nov 16 18:54:01 PST 2015
[     6.345] (II) LoadModule: "nvidia"
[     6.347] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     6.357] (II) Module nvidia: vendor="NVIDIA Corporation"
[     6.357] 	compiled for 4.0.2, module version = 1.0.0
[     6.357] 	Module class: X.Org Video Driver
[     6.358] (II) NVIDIA dlloader X Driver  358.16  Mon Nov 16 18:32:40 PST 2015
[     6.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     6.360] (II) Loading sub module "fb"
[     6.360] (II) LoadModule: "fb"
[     6.361] (II) Loading /usr/lib/xorg/modules/libfb.so
[     6.363] (II) Module fb: vendor="X.Org Foundation"
[     6.363] 	compiled for 1.18.0, module version = 1.0.0
[     6.363] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.363] (II) Loading sub module "wfb"
[     6.363] (II) LoadModule: "wfb"
[     6.363] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     6.366] (II) Module wfb: vendor="X.Org Foundation"
[     6.366] 	compiled for 1.18.0, module version = 1.0.0
[     6.366] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     6.366] (II) Loading sub module "ramdac"
[     6.366] (II) LoadModule: "ramdac"
[     6.366] (II) Module "ramdac" already built-in
[     6.370] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     6.370] (==) NVIDIA(0): RGB weight 888
[     6.370] (==) NVIDIA(0): Default visual is TrueColor
[     6.370] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     6.371] (**) NVIDIA(0): Option "Stereo" "0"
[     6.371] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
[     6.371] (**) NVIDIA(0): Option "SLI" "Off"
[     6.371] (**) NVIDIA(0): Option "MultiGPU" "Off"
[     6.371] (**) NVIDIA(0): Option "BaseMosaic" "off"
[     6.371] (**) NVIDIA(0): Stereo disabled by request
[     6.371] (**) NVIDIA(0): NVIDIA SLI disabled.
[     6.371] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
[     6.371] (**) NVIDIA(0): Option "MetaModes" "DVI-I-1: nvidia-auto-select +0+0, HDMI-0: nvidia-auto-select +1920+0; DVI-I-1: 1680x1050 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1600x1200 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1440x900 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1280x1024 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1280x1024_60 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1280x960 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1152x864 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1024x768 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1024x768_70 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1024x768_60 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 800x600 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 800x600_72 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 800x600_60 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 800x600_56 +0+0, HDMI-0: nvidia-auto-select +0+0"
[     6.371] (**) NVIDIA(0): Enabling 2D acceleration
[     7.177] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[     7.177] (--) NVIDIA(0):     CRT-0
[     7.177] (--) NVIDIA(0):     DFP-0 (boot)
[     7.177] (--) NVIDIA(0):     DFP-1
[     7.177] (--) NVIDIA(0):     DFP-2
[     7.177] (--) NVIDIA(0):     DFP-3
[     7.177] (--) NVIDIA(0):     DFP-4
[     7.177] (--) NVIDIA(0):     DFP-5
[     7.177] (--) NVIDIA(0):     DFP-6
[     7.177] (--) NVIDIA(0):     DFP-7
[     7.193] (--) NVIDIA(0): CRT-0: disconnected
[     7.193] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[     7.193] (--) NVIDIA(0): 
[     7.223] (--) NVIDIA(0): Ancor Communications Inc VH226 (DFP-0): connected
[     7.223] (--) NVIDIA(0): Ancor Communications Inc VH226 (DFP-0): Internal TMDS
[     7.223] (--) NVIDIA(0): Ancor Communications Inc VH226 (DFP-0): 330.0 MHz maximum pixel clock
[     7.223] (--) NVIDIA(0): 
[     7.223] (--) NVIDIA(0): DFP-1: disconnected
[     7.223] (--) NVIDIA(0): DFP-1: Internal DisplayPort
[     7.223] (--) NVIDIA(0): DFP-1: 960.0 MHz maximum pixel clock
[     7.223] (--) NVIDIA(0): 
[     7.223] (--) NVIDIA(0): DFP-2: disconnected
[     7.223] (--) NVIDIA(0): DFP-2: Internal TMDS
[     7.223] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[     7.223] (--) NVIDIA(0): 
[     7.224] (--) NVIDIA(0): DFP-3: disconnected
[     7.224] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[     7.224] (--) NVIDIA(0): DFP-3: 960.0 MHz maximum pixel clock
[     7.224] (--) NVIDIA(0): 
[     7.224] (--) NVIDIA(0): DFP-4: disconnected
[     7.224] (--) NVIDIA(0): DFP-4: Internal TMDS
[     7.224] (--) NVIDIA(0): DFP-4: 330.0 MHz maximum pixel clock
[     7.224] (--) NVIDIA(0): 
[     7.254] (--) NVIDIA(0): LG Electronics 22EA63 (DFP-5): connected
[     7.254] (--) NVIDIA(0): LG Electronics 22EA63 (DFP-5): Internal TMDS
[     7.254] (--) NVIDIA(0): LG Electronics 22EA63 (DFP-5): 600.0 MHz maximum pixel clock
[     7.254] (--) NVIDIA(0): 
[     7.254] (--) NVIDIA(0): DFP-6: disconnected
[     7.254] (--) NVIDIA(0): DFP-6: Internal DisplayPort
[     7.254] (--) NVIDIA(0): DFP-6: 960.0 MHz maximum pixel clock
[     7.254] (--) NVIDIA(0): 
[     7.254] (--) NVIDIA(0): DFP-7: disconnected
[     7.254] (--) NVIDIA(0): DFP-7: Internal TMDS
[     7.254] (--) NVIDIA(0): DFP-7: 330.0 MHz maximum pixel clock
[     7.254] (--) NVIDIA(0): 
[     7.254] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[     7.255] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 960 (GM206-A) at PCI:1:0:0 (GPU-0)
[     7.255] (--) NVIDIA(0): Memory: 2097152 kBytes
[     7.255] (--) NVIDIA(0): VideoBIOS: 84.06.0d.00.02
[     7.255] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     7.255] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     7.255] (**) NVIDIA(0):     device Ancor Communications Inc VH226 (DFP-0) (Using EDID
[     7.255] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[     7.257] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[     7.257] (**) NVIDIA(0):     device LG Electronics 22EA63 (DFP-5) (Using EDID
[     7.257] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[     7.262] (II) NVIDIA(0): Validated MetaModes:
[     7.262] (II) NVIDIA(0):    
[     7.262] (II) NVIDIA(0):     "DVI-I-1:nvidia-auto-select+0+0,HDMI-0:nvidia-auto-select+1920+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1680x1050+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1600x1200+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1440x900+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1280x1024+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1280x1024_60+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1280x960+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1152x864+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1024x768+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1024x768_70+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:1024x768_60+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:800x600+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:800x600_72+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:800x600_60+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0):     "DVI-I-1:800x600_56+0+0,HDMI-0:nvidia-auto-select+0+0"
[     7.262] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1200
[     7.268] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[     7.268] (--) NVIDIA(0):     option
[     7.268] (--) Depth 24 pixmap format is 32 bpp
[     7.269] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[     7.269] (II) NVIDIA:     access.
[     7.272] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     7.272] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     7.272] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     7.272] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     7.272] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     7.272] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     7.272] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     7.272] (II) NVIDIA(0):     Config Options in the README.
[     7.290] (II) NVIDIA(0): Setting mode "DVI-I-1:nvidia-auto-select+0+0,HDMI-0:nvidia-auto-select+1920+0"
[     7.431] (==) NVIDIA(0): Disabling shared memory pixmaps
[     7.431] (==) NVIDIA(0): Backing store enabled
[     7.431] (==) NVIDIA(0): Silken mouse enabled
[     7.433] (**) NVIDIA(0): DPMS enabled
[     7.433] (II) Loading sub module "dri2"
[     7.433] (II) LoadModule: "dri2"
[     7.433] (II) Module "dri2" already built-in
[     7.433] (II) NVIDIA(0): [DRI2] Setup complete
[     7.433] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     7.433] (--) RandR disabled
[     7.437] (II) Initializing extension GLX
[     7.437] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event4)
[     7.544] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.544] (II) LoadModule: "evdev"
[     7.544] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     7.548] (II) Module evdev: vendor="X.Org Foundation"
[     7.548] 	compiled for 1.18.0, module version = 2.10.0
[     7.548] 	Module class: X.Org XInput Driver
[     7.548] 	ABI class: X.Org XInput driver, version 22.1
[     7.548] (II) Using input driver 'evdev' for 'Power Button'
[     7.548] (**) Power Button: always reports core events
[     7.548] (**) evdev: Power Button: Device: "/dev/input/event4"
[     7.548] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.548] (--) evdev: Power Button: Found keys
[     7.548] (II) evdev: Power Button: Configuring as keyboard
[     7.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
[     7.548] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     7.548] (**) Option "xkb_rules" "evdev"
[     7.548] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     7.548] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     7.548] (II) Using input driver 'evdev' for 'Power Button'
[     7.548] (**) Power Button: always reports core events
[     7.548] (**) evdev: Power Button: Device: "/dev/input/event3"
[     7.548] (--) evdev: Power Button: Vendor 0 Product 0x1
[     7.548] (--) evdev: Power Button: Found keys
[     7.548] (II) evdev: Power Button: Configuring as keyboard
[     7.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
[     7.548] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     7.548] (**) Option "xkb_rules" "evdev"
[     7.549] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[     7.549] (II) No input driver specified, ignoring this device.
[     7.549] (II) This device may have been added with another device file.
[     7.549] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[     7.549] (II) No input driver specified, ignoring this device.
[     7.549] (II) This device may have been added with another device file.
[     7.549] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[     7.549] (II) No input driver specified, ignoring this device.
[     7.549] (II) This device may have been added with another device file.
[     7.550] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[     7.550] (II) No input driver specified, ignoring this device.
[     7.550] (II) This device may have been added with another device file.
[     7.550] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 (/dev/input/event0)
[     7.550] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: Applying InputClass "evdev keyboard catchall"
[     7.550] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0'
[     7.550] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: always reports core events
[     7.550] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Device: "/dev/input/event0"
[     7.550] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Vendor 0x45e Product 0x7a5
[     7.550] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found keys
[     7.550] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Configuring as keyboard
[     7.550] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:045E:07A5.0001/input/input2/event0"
[     7.550] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0" (type: KEYBOARD, id 8)
[     7.550] (**) Option "xkb_rules" "evdev"
[     7.551] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 (/dev/input/event1)
[     7.551] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: Applying InputClass "evdev pointer catchall"
[     7.551] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0'
[     7.551] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: always reports core events
[     7.551] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Device: "/dev/input/event1"
[     7.603] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Vendor 0x45e Product 0x7a5
[     7.603] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found 9 mouse buttons
[     7.603] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found scroll wheel(s)
[     7.603] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found relative axes
[     7.603] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found x and y relative axes
[     7.603] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Configuring as mouse
[     7.603] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Adding scrollwheel support
[     7.603] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: YAxisMapping: buttons 4 and 5
[     7.603] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.603] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:045E:07A5.0002/input/input3/event1"
[     7.603] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0" (type: MOUSE, id 9)
[     7.603] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: initialized for relative axes.
[     7.604] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: (accel) keeping acceleration scheme 1
[     7.604] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: (accel) acceleration profile 0
[     7.604] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: (accel) acceleration factor: 2.000
[     7.604] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: (accel) acceleration threshold: 4
[     7.605] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 (/dev/input/mouse0)
[     7.605] (II) No input driver specified, ignoring this device.
[     7.605] (II) This device may have been added with another device file.
[     7.606] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 (/dev/input/event2)
[     7.606] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: Applying InputClass "evdev keyboard catchall"
[     7.606] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v9.0'
[     7.606] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: always reports core events
[     7.606] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Device: "/dev/input/event2"
[     7.606] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Vendor 0x45e Product 0x7a5
[     7.606] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found 1 mouse buttons
[     7.606] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found scroll wheel(s)
[     7.606] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found relative axes
[     7.606] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found absolute axes
[     7.606] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found absolute multitouch axes
[     7.606] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Fake MT device detected
[     7.606] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found x and y absolute axes
[     7.606] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Found keys
[     7.606] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Forcing relative x/y axes to exist.
[     7.606] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Configuring as mouse
[     7.606] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Configuring as keyboard
[     7.606] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: Adding scrollwheel support
[     7.606] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: YAxisMapping: buttons 4 and 5
[     7.606] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     7.606] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.2/0003:045E:07A5.0003/input/input4/event2"
[     7.606] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v9.0" (type: KEYBOARD, id 10)
[     7.606] (**) Option "xkb_rules" "evdev"
[     7.606] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: initialized for relative axes.
[     7.606] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v9.0: ignoring absolute axes.
[     7.607] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: (accel) keeping acceleration scheme 1
[     7.607] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: (accel) acceleration profile 0
[     7.607] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: (accel) acceleration factor: 2.000
[     7.607] (**) Microsoft Microsoft® 2.4GHz Transceiver v9.0: (accel) acceleration threshold: 4
[     7.608] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v9.0 (/dev/input/js0)
[     7.608] (II) No input driver specified, ignoring this device.
[     7.608] (II) This device may have been added with another device file.
[     7.608] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event8)
[     7.608] (II) No input driver specified, ignoring this device.
[     7.608] (II) This device may have been added with another device file.
[     7.609] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event9)
[     7.609] (II) No input driver specified, ignoring this device.
[     7.609] (II) This device may have been added with another device file.
[     7.609] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event10)
[     7.609] (II) No input driver specified, ignoring this device.
[     7.609] (II) This device may have been added with another device file.
[     7.610] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event11)
[     7.610] (II) No input driver specified, ignoring this device.
[     7.610] (II) This device may have been added with another device file.
[     7.610] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event12)
[     7.610] (II) No input driver specified, ignoring this device.
[     7.610] (II) This device may have been added with another device file.
[     7.611] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event13)
[     7.611] (II) No input driver specified, ignoring this device.
[     7.611] (II) This device may have been added with another device file.
[     7.611] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event14)
[     7.611] (II) No input driver specified, ignoring this device.
[     7.611] (II) This device may have been added with another device file.
[     7.612] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[     7.612] (II) No input driver specified, ignoring this device.
[     7.612] (II) This device may have been added with another device file.
[     7.612] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event7)
[     7.612] (II) No input driver specified, ignoring this device.
[     7.612] (II) This device may have been added with another device file.
[     7.613] (II) config/udev: Adding input device UVC Camera (046d:0821) (/dev/input/event15)
[     7.613] (**) UVC Camera (046d:0821): Applying InputClass "evdev keyboard catchall"
[     7.613] (II) Using input driver 'evdev' for 'UVC Camera (046d:0821)'
[     7.613] (**) UVC Camera (046d:0821): always reports core events
[     7.613] (**) evdev: UVC Camera (046d:0821): Device: "/dev/input/event15"
[     7.613] (--) evdev: UVC Camera (046d:0821): Vendor 0x46d Product 0x821
[     7.613] (--) evdev: UVC Camera (046d:0821): Found keys
[     7.613] (II) evdev: UVC Camera (046d:0821): Configuring as keyboard
[     7.613] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.2/input/input18/event15"
[     7.613] (II) XINPUT: Adding extended input device "UVC Camera (046d:0821)" (type: KEYBOARD, id 11)
[     7.613] (**) Option "xkb_rules" "evdev"
[     7.614] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[     7.614] (II) No input driver specified, ignoring this device.
[     7.614] (II) This device may have been added with another device file.
[     9.762] (--) NVIDIA(GPU-0): CRT-0: disconnected
[     9.762] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[     9.762] (--) NVIDIA(GPU-0): 
[     9.800] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): connected
[     9.800] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): Internal TMDS
[     9.800] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): 330.0 MHz maximum pixel clock
[     9.800] (--) NVIDIA(GPU-0): 
[     9.800] (--) NVIDIA(GPU-0): DFP-1: disconnected
[     9.800] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[     9.800] (--) NVIDIA(GPU-0): DFP-1: 960.0 MHz maximum pixel clock
[     9.800] (--) NVIDIA(GPU-0): 
[     9.800] (--) NVIDIA(GPU-0): DFP-2: disconnected
[     9.800] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[     9.800] (--) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
[     9.800] (--) NVIDIA(GPU-0): 
[     9.800] (--) NVIDIA(GPU-0): DFP-3: disconnected
[     9.800] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[     9.800] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[     9.800] (--) NVIDIA(GPU-0): 
[     9.800] (--) NVIDIA(GPU-0): DFP-4: disconnected
[     9.800] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[     9.800] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[     9.800] (--) NVIDIA(GPU-0): 
[     9.831] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): connected
[     9.831] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): Internal TMDS
[     9.831] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): 600.0 MHz maximum pixel clock
[     9.831] (--) NVIDIA(GPU-0): 
[     9.831] (--) NVIDIA(GPU-0): DFP-6: disconnected
[     9.831] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[     9.831] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[     9.831] (--) NVIDIA(GPU-0): 
[     9.831] (--) NVIDIA(GPU-0): DFP-7: disconnected
[     9.831] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[     9.831] (--) NVIDIA(GPU-0): DFP-7: 330.0 MHz maximum pixel clock
[     9.831] (--) NVIDIA(GPU-0): 
[    10.047] (II) NVIDIA(0): Setting mode "HDMI-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}"
[    10.191] (II) NVIDIA(0): Setting mode "NULL"
[    10.750] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    10.750] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    10.750] (--) NVIDIA(GPU-0): 
[    10.781] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): connected
[    10.781] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): Internal TMDS
[    10.781] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): 330.0 MHz maximum pixel clock
[    10.781] (--) NVIDIA(GPU-0): 
[    10.781] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    10.781] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[    10.781] (--) NVIDIA(GPU-0): DFP-1: 960.0 MHz maximum pixel clock
[    10.781] (--) NVIDIA(GPU-0): 
[    10.781] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    10.781] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    10.781] (--) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
[    10.781] (--) NVIDIA(GPU-0): 
[    10.781] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    10.781] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[    10.781] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[    10.781] (--) NVIDIA(GPU-0): 
[    10.782] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    10.782] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[    10.782] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[    10.782] (--) NVIDIA(GPU-0): 
[    10.812] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): connected
[    10.812] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): Internal TMDS
[    10.812] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): 600.0 MHz maximum pixel clock
[    10.812] (--) NVIDIA(GPU-0): 
[    10.812] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    10.812] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    10.812] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[    10.812] (--) NVIDIA(GPU-0): 
[    10.812] (--) NVIDIA(GPU-0): DFP-7: disconnected
[    10.812] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[    10.812] (--) NVIDIA(GPU-0): DFP-7: 330.0 MHz maximum pixel clock
[    10.812] (--) NVIDIA(GPU-0): 
[    12.595] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    12.595] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    12.595] (--) NVIDIA(GPU-0): 
[    12.626] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): connected
[    12.626] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): Internal TMDS
[    12.626] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): 330.0 MHz maximum pixel clock
[    12.626] (--) NVIDIA(GPU-0): 
[    12.626] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    12.626] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[    12.626] (--) NVIDIA(GPU-0): DFP-1: 960.0 MHz maximum pixel clock
[    12.626] (--) NVIDIA(GPU-0): 
[    12.626] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    12.626] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    12.626] (--) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
[    12.626] (--) NVIDIA(GPU-0): 
[    12.626] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    12.626] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[    12.626] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[    12.626] (--) NVIDIA(GPU-0): 
[    12.626] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    12.626] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[    12.626] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[    12.626] (--) NVIDIA(GPU-0): 
[    12.656] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): connected
[    12.656] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): Internal TMDS
[    12.656] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): 600.0 MHz maximum pixel clock
[    12.656] (--) NVIDIA(GPU-0): 
[    12.657] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    12.657] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    12.657] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[    12.657] (--) NVIDIA(GPU-0): 
[    12.657] (--) NVIDIA(GPU-0): DFP-7: disconnected
[    12.657] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[    12.657] (--) NVIDIA(GPU-0): DFP-7: 330.0 MHz maximum pixel clock
[    12.657] (--) NVIDIA(GPU-0): 
[    14.509] (--) NVIDIA(GPU-0): CRT-0: disconnected
[    14.509] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    14.509] (--) NVIDIA(GPU-0): 
[    14.539] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): connected
[    14.539] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): Internal TMDS
[    14.539] (--) NVIDIA(GPU-0): Ancor Communications Inc VH226 (DFP-0): 330.0 MHz maximum pixel clock
[    14.539] (--) NVIDIA(GPU-0): 
[    14.540] (--) NVIDIA(GPU-0): DFP-1: disconnected
[    14.540] (--) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[    14.540] (--) NVIDIA(GPU-0): DFP-1: 960.0 MHz maximum pixel clock
[    14.540] (--) NVIDIA(GPU-0): 
[    14.540] (--) NVIDIA(GPU-0): DFP-2: disconnected
[    14.540] (--) NVIDIA(GPU-0): DFP-2: Internal TMDS
[    14.540] (--) NVIDIA(GPU-0): DFP-2: 330.0 MHz maximum pixel clock
[    14.540] (--) NVIDIA(GPU-0): 
[    14.540] (--) NVIDIA(GPU-0): DFP-3: disconnected
[    14.540] (--) NVIDIA(GPU-0): DFP-3: Internal DisplayPort
[    14.540] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[    14.540] (--) NVIDIA(GPU-0): 
[    14.540] (--) NVIDIA(GPU-0): DFP-4: disconnected
[    14.540] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[    14.540] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[    14.540] (--) NVIDIA(GPU-0): 
[    14.570] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): connected
[    14.570] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): Internal TMDS
[    14.570] (--) NVIDIA(GPU-0): LG Electronics 22EA63 (DFP-5): 600.0 MHz maximum pixel clock
[    14.570] (--) NVIDIA(GPU-0): 
[    14.570] (--) NVIDIA(GPU-0): DFP-6: disconnected
[    14.570] (--) NVIDIA(GPU-0): DFP-6: Internal DisplayPort
[    14.570] (--) NVIDIA(GPU-0): DFP-6: 960.0 MHz maximum pixel clock
[    14.570] (--) NVIDIA(GPU-0): 
[    14.571] (--) NVIDIA(GPU-0): DFP-7: disconnected
[    14.571] (--) NVIDIA(GPU-0): DFP-7: Internal TMDS
[    14.571] (--) NVIDIA(GPU-0): DFP-7: 330.0 MHz maximum pixel clock
[    14.571] (--) NVIDIA(GPU-0): 

xorg.conf.d/20-nvidia.conf

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 358.16  (buildmeister@swio-display-x64-rhel04-12)  Mon Nov 16 19:58:01 PST 2015

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Ancor Communications Inc VH226"
    HorizSync       31.0 - 83.0
    VertRefresh     50.0 - 76.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 960"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Stereo" "0"
    Option         "nvidiaXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DVI-I-1: nvidia-auto-select +0+0, HDMI-0: nvidia-auto-select +1920+0; DVI-I-1: 1680x1050 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1600x1200 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1440x900 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1280x1024 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1280x1024_60 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1280x960 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1152x864 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1024x768 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1024x768_70 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 1024x768_60 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 800x600 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 800x600_72 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 800x600_60 +0+0, HDMI-0: nvidia-auto-select +0+0; DVI-I-1: 800x600_56 +0+0, HDMI-0: nvidia-auto-select +0+0"
    Option         "SLI" "Off"
    Option         "MultiGPU" "Off"
    Option         "BaseMosaic" "off"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Last edited by doblerone (2015-11-26 19:18:27)

Offline

#6 2015-11-26 11:38:58

V1del
Member
Registered: 2012-10-16
Posts: 1,313

Re: Xorg not starting after upgrade

All of this works here, do you have a custom/outdated evdev package from AUR?

Offline

#7 2015-11-26 12:03:38

doblerone
Member
Registered: 2011-12-08
Posts: 163

Re: Xorg not starting after upgrade

@V1del, my system is up-to-date and it was running ok before that. I did a fresh install two weeks ago.

Offline

#8 2015-11-26 12:39:52

V1del
Member
Registered: 2012-10-16
Posts: 1,313

Re: Xorg not starting after upgrade

@doblerone specifically
drop that nvidia-conf and look if it works then

Offline

#9 2015-11-26 13:22:53

doblerone
Member
Registered: 2011-12-08
Posts: 163

Re: Xorg not starting after upgrade

V1del wrote:

@doblerone specifically
drop that nvidia-conf and look if it works then

I moved the 20-nvidia.conf to 20-nvidia.conf.old but still my desktop doesn't boot. As before, it goes well till sddm login screen but when I enter my password I get a blank screen.

Edit: I downgraded xorg-server, xorg-server-common and xf86-input-evdev but still I have the same issue.

Last edited by doblerone (2015-11-26 19:19:52)

Offline

#10 2015-11-26 16:40:59

mrunion
Member
From: Jonesborough, TN
Registered: 2007-01-26
Posts: 1,611
Website

Re: Xorg not starting after upgrade

Have you guys read this? https://bugs.archlinux.org/task/47151


Matt

"It is very difficult to educate the educated."

Offline

#11 2015-11-26 17:19:19

doblerone
Member
Registered: 2011-12-08
Posts: 163

Re: Xorg not starting after upgrade

mrunion wrote:

Have you guys read this? https://bugs.archlinux.org/task/47151

I tried the workaround and it didn't work for my configuration sad

Offline

#12 2015-11-26 18:18:18

ilkyest
Member
From: Brazil
Registered: 2010-02-13
Posts: 261

Re: Xorg not starting after upgrade

Same here, but with a travelmate 2480 (Intel Graphics) and, even Konsole, shows wrong and sddm don't appears, or appears with a half konsole on it

Offline

#13 2015-11-27 04:50:10

ChrisG
Member
From: USA
Registered: 2015-11-27
Posts: 29
Website

Re: Xorg not starting after upgrade

This may be related. Not sure. I had this problem. I use GDM and from a search on Google I turned up this solution. I had to edit the /etc/gdm/custom.conf file.

  GNU nano 2.4.2                            File: /etc/gdm/custom.conf                                                              

# GDM configuration storage

[daemon]
# Uncoment the line below to force the login screen to use Xorg
WaylandEnable=false

[security]

[xdmcp]

[greeter]

[chooser]

[debug]
# Uncomment the line below to turn on debugging
#Enable=true

The line WaylandEnable=false was commented out so I changed it. It may be the case for other DMs interacting with the new xorg push and it trying to enable Wayland. Check your DM's files and see if you have an entry like mine. Comment or uncomment accordingly and see if disabling Wayland will help.


Signature Geek - This is where you learn.

Offline

#14 2016-01-23 10:05:11

Nono3167
Member
Registered: 2015-11-23
Posts: 3

Re: Xorg not starting after upgrade

I have just tried to upgrade all my xorg related packages (xorg-server to 1.18.0.4) and I ended up with the same issue : when I log in, it turns back to a console view for a second and then back again to SDDM.

I don't have any xorg.conf to play with so I'm a bit stuck.

Is it working for you guys or are you still using those pre-1.18 versions ?

Offline

#15 2016-01-23 12:21:02

mrunion
Member
From: Jonesborough, TN
Registered: 2007-01-26
Posts: 1,611
Website

Re: Xorg not starting after upgrade

What theme are you using with SDDM? Breeze has a known issue. Try using Maui to test with.


Matt

"It is very difficult to educate the educated."

Offline

Board footer

Powered by FluxBB