You are not logged in.
Well, after countless hard reboots of my msi wind for about a month now, because of a non responsibe black screen after a period of time or inactivity, or a not starting and freezed X, i wanna try the vesa video driver, i don't even use hardware acceleration so much, so i want to see if my problems are the intel driver specificly.
The thing is that with Driver "vesa" option in the "device" section, the resolution is 800x600, not 1024x600 like with the intel drivers.
And yes, i tried xf86-video-intel and xf86-video-intel-legacy and even xf86-video-intel-newest from aur, and a lot of settings involving XAA UXA and EXA accel methods, to name a few things... so im tired, i only want X to behave like i want, and do not do nothing fancy, only work like the good old times...
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# InputDevice "Touchpad" "SendCoreEvents"
# InputDevice "USB Mouse" "CorePointer"
# InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "ddc"
Load "dbe"
# Load "dri"
Load "glx"
Load "bitmap" # bitmap-fonts
# Load "type1"
Load "vbe"
# Load "record"
Load "extmod"
# Load "freetype"
Load "synaptics"
EndSection
Section "ServerFlags"
# Option "AllowMouseOpenFail" "true"
# Option "AutoAddDevices" "False"
# Option "AIGLX" "true"
Option "BlankTime" "10" #This blanks screen
Option "StandbyTime" "0" #This is DPMS
Option "SuspendTime" "0" #DPMS
Option "OffTime" "0" #DPMS
EndSection
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "keyboard"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "es"
#EndSection
#Section "InputDevice"
# Identifier "USB Mouse"
# Driver "mouse"
# Option "Device" "/dev/input/mice"
# Option "SendCoreEvents" "true"
# Option "Protocol" "IMPS/2"
# Option "ZAxisMapping" "4 5"
# Option "Buttons" "5"
#EndSection
#Section "InputDevice"
# Identifier "Touchpad"
# Driver "synaptics"
# Option "Device" "/dev/input/mouse0"
# Option "Protocol" "auto-dev"
# Option "LeftEdge" "130"
# Option "RightEdge" "840"
# Option "TopEdge" "130"
# Option "BottomEdge" "640"
# Option "FingerLow" "7"
# Option "FingerHigh" "8"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "110"
# Option "EmulateMidButtonTime" "75"
# Option "VertScrollDelta" "20"
# Option "HorizScrollDelta" "20"
# Option "MinSpeed" "0.25"
# Option "MaxSpeed" "0.50"
# Option "AccelFactor" "0.010"
# Option "EdgeMotionMinSpeed" "200"
# Option "EdgeMotionMaxSpeed" "200"
# Option "UpDownScrolling" "1"
# Option "CircularScrolling" "1"
# Option "CircScrollDelta" "0.1"
# Option "CircScrollTrigger" "2"
# Option "SHMConfig" "on"
# Option "Emulate3Buttons" "on"
# Option "VertTwoFingerScroll" "1"
# Option "HorizTwoFingerScroll" "1"
#EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# VendorName "Monitor Vendor"
# ModelName "Monitor Model"
Modeline "1024x600@60" 51.90 1024 1056 1248 1280 640 653 660 673
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "Intel Corporation"
BoardName "Mobile 945GME Express Integrated Graphics Controller"
# Option "AccelMethod" "xaa"
# Option "MigrationHeuristic" "greedy"
# Option "ExaNoComposite" "false"
# Option "RenderAccel" "true"
# Option "monitor-VGA" "external"
# Option "monitor-LVDS" "internal"
# Option "AccelMethod" "EXA"
# Option "DRI" "true"
# Option "AllowGLXWithComposite" "true"
# Option "AddARGBGLXVisuals" "true"
# Option "XAANoOffscreenPixmaps" "true"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
# Virtual 2704 1050
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1680x1050" "1024x600" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1680x1050" "1024x600" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1024x600" "800x600" "640x480"
EndSubSection
EndSection
#Section "DRI"
# Mode 0666
#EndSection
#Section "Extensions"
# Option "Composite" "Disable"
#EndSection
Last edited by leo2501 (2009-05-15 03:25:21)
Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.
-- Antoine de Saint-Exupery
Offline
I'm probably making myself look like an idiot, but you could try removing all the other resolutions from the Modes lines, except the resolution you want (1024x600).
"Click clack, clicketyclacketyclick!"
-- IBM Model M
Offline
just tried, and no... it didn't help i don't understand how to set it right
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
# Virtual 2704 1050
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x600"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x600"
EndSubSection
EndSection
Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.
-- Antoine de Saint-Exupery
Offline
Aww... Too bad. That's all I could come up with... Strange that no one else has replied. Surely some pro could help you much better than I can!
"Click clack, clicketyclacketyclick!"
-- IBM Model M
Offline
well i give up with the vesa driver (tried uvesafb, fbset, modelines, xrandr --newmode's, grub kernel line's), so i returned to the "intel" driver in UXA accel method, at least it work, so maybe i will implement something to workaround it's lookups until it works okay someday from here...
Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.
-- Antoine de Saint-Exupery
Offline