You are not logged in.

Pages: 1

#1 2009-05-29 20:47:15

rpereyra
Member
Registered: 2009-05-29
Posts: 2

x11 hang the computer and monitor becomes black

Hi all !

I am a newbiwe with Arch but an old user of linux (slack, debian ..).

I am trying to configure  X11 but I can't make it work, when I run "startx" without xorg.conf file, the monitor screen becomes black and the computer does not respond further, and I have to reset it.

I read the arch wiki, hal installed and run, but I still have this problem.

I'm using the latest version of the arch, up to date with pacman.

What could be happening? Someone can give me a hint to solve this problem.

Sorry my english.

Thanks in advance.

roberto

X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686 
Current Operating System: Linux arch1 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 15 April 2009  11:09:10AM
 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 29 17:13:05 2009
(II) Loader magic: 0x1a40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@1:10:0) Cirrus Logic GD 5465 [Laguna] rev 2, Mem @ 0xe4000000/33554432, 0xe7000000/65536, BIOS @ 0x????????/32768
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
    Section "Device"
        Identifier    "Builtin Default cirrus Device 0"
        Driver    "cirrus"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default cirrus Screen 0"
        Device    "Builtin Default cirrus Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default vesa Device 0"
        Driver    "vesa"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default vesa Screen 0"
        Device    "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
        Identifier    "Builtin Default fbdev Device 0"
        Driver    "fbdev"
    EndSection
    Section "Screen"
        Identifier    "Builtin Default fbdev Screen 0"
        Device    "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
        Identifier    "Builtin Default Layout"
        Screen    "Builtin Default cirrus Screen 0"
        Screen    "Builtin Default vesa Screen 0"
        Screen    "Builtin Default fbdev Screen 0"
    EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default cirrus Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default cirrus Device 0"
(==) No monitor specified for screen "Builtin Default cirrus Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/TTF" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "cirrus"
(II) Loading /usr/lib/xorg/modules/drivers//cirrus_drv.so
(II) Module cirrus: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.3.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) CIRRUS: driver for Cirrus chipsets: CLGD5430, CLGD5434-4, CLGD5434-8,
    CLGD5436, CLGD5446, CLGD5480, CL-GD5462, CL-GD5464, CL-GD5464BD,
    CL-GD5465, CL-GD7548
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:0a:0
(WW) Falling back to old probe method for cirrus
(--) Assigning device section with no busID to primary device
(--) Chipset CL-GD5465 found
(II) Loading sub module "cirrus_laguna"
(II) LoadModule: "cirrus_laguna"
(II) Loading /usr/lib/xorg/modules/drivers//cirrus_laguna.so
(II) Module cirrus_laguna: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
LgPreInit
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) CIRRUS(0): Primary V_BIOS segment is: 0xc000
(II) CIRRUS(0): Creating default Display subsection in Screen section
    "Builtin Default cirrus Screen 0" for depth/fbbpp 24/24
(==) CIRRUS(0): Depth 24, (--) framebuffer bpp 24
(==) CIRRUS(0): RGB weight 888
(==) CIRRUS(0): Default visual is TrueColor
(==) CIRRUS(0): Using SW cursor
(--) CIRRUS(0): Linear framebuffer at 0xE4000000
(--) CIRRUS(0): MMIO registers at 0xE7000000
Scratch Pads: 0:44 1:80 2:03 3:20
(--) CIRRUS(0): VideoRAM: 4096 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
LgI2CInit
(II) CIRRUS(0): I2C bus "I2C bus 1" initialized.
(II) CIRRUS(0): I2C bus "I2C bus 2" initialized.
(II) CIRRUS(0): I2C device "I2C bus 1:E-EDID segment register" registered at address 0x60.
(II) CIRRUS(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) CIRRUS(0): I2C Monitor info: 0x91ed880
(II) CIRRUS(0): Manufacturer: HPC  Model: 2fe  Serial#: 1455
(II) CIRRUS(0): Year: 2007  Week: 6
(II) CIRRUS(0): EDID Version: 1.3
(II) CIRRUS(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) CIRRUS(0): Sync:  Separate
(II) CIRRUS(0): Max Image Size [cm]: horiz.: 33  vert.: 27
(II) CIRRUS(0): Gamma: 2.20
(II) CIRRUS(0): DPMS capabilities: Off; RGB/Color Display
(II) CIRRUS(0): First detailed timing is preferred mode
(II) CIRRUS(0): redX: 0.620 redY: 0.330   greenX: 0.300 greenY: 0.600
(II) CIRRUS(0): blueX: 0.150 blueY: 0.100   whiteX: 0.310 whiteY: 0.330
(II) CIRRUS(0): Supported VESA Video Modes:
(II) CIRRUS(0): 720x400@70Hz
(II) CIRRUS(0): 640x480@60Hz
(II) CIRRUS(0): 640x480@67Hz
(II) CIRRUS(0): 640x480@75Hz
(II) CIRRUS(0): 800x600@56Hz
(II) CIRRUS(0): 800x600@60Hz
(II) CIRRUS(0): 800x600@75Hz
(II) CIRRUS(0): 1024x768@60Hz
(II) CIRRUS(0): 1024x768@70Hz
(II) CIRRUS(0): 1024x768@75Hz
(II) CIRRUS(0): 1280x1024@75Hz
(II) CIRRUS(0): 1152x870@75Hz
(II) CIRRUS(0): Manufacturer's mask: 0
(II) CIRRUS(0): Supported Future Video Modes:
(II) CIRRUS(0): #0: hsize: 1280  vsize 1024  refresh: 75  vid: 36737
(II) CIRRUS(0): #1: hsize: 1280  vsize 1024  refresh: 70  vid: 35457
(II) CIRRUS(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) CIRRUS(0): Supported additional Video Mode:
(II) CIRRUS(0): clock: 135.0 MHz   Image Size:  337 x 270 mm
(II) CIRRUS(0): h_active: 1280  h_sync: 1296  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) CIRRUS(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) CIRRUS(0): Monitor name: LA766
(II) CIRRUS(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 140 MHz
(II) CIRRUS(0): Serial No: 0000000000001
(II) CIRRUS(0): EDID (in hex):
(II) CIRRUS(0):     00ffffffffffff002203fe02af050000
(II) CIRRUS(0):     0611010368211b782aeea69e544c9926
(II) CIRRUS(0):     194f54b74f80818f818a818001010101
(II) CIRRUS(0):     010101010101bc34009851002a401090
(II) CIRRUS(0):     1300510e1100001e000000fc004c4137
(II) CIRRUS(0):     36360a20202020202020000000fd0037
(II) CIRRUS(0):     4b1e500e000a202020202020000000ff
(II) CIRRUS(0):     00303030303030303030303030310004
(II) CIRRUS(0): end of I2C Monitor info

(II) CIRRUS(0): EDID vendor "HPC", prod id 766
(II) CIRRUS(0): Using EDID range info for horizontal sync
(II) CIRRUS(0): Using EDID range info for vertical refresh
(II) CIRRUS(0): Printing DDC gathered Modelines:
(II) CIRRUS(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) CIRRUS(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) CIRRUS(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) CIRRUS(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) CIRRUS(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) CIRRUS(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) CIRRUS(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) CIRRUS(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) CIRRUS(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) CIRRUS(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) CIRRUS(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) CIRRUS(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) CIRRUS(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) CIRRUS(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) CIRRUS(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 -hsync +vsync (74.6 kHz)
(II) CIRRUS(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(==) CIRRUS(0): Using gamma correction (1.0, 1.0, 1.0)
(==) CIRRUS(0): Min pixel clock is 12 MHz
(--) CIRRUS(0): Max pixel clock is 170 MHz
(II) CIRRUS(0): <default monitor>: Using hsync range of 30.00-80.00 kHz
(II) CIRRUS(0): <default monitor>: Using vrefresh range of 55.00-75.00 Hz
(II) CIRRUS(0): <default monitor>: Using maximum pixel clock of 140.00 MHz
(II) CIRRUS(0): Estimated virtual size for aspect ratio 1.2222 is 1280x1024
(II) CIRRUS(0): Clock range:  12.00 to 170.00 MHz
(II) CIRRUS(0): Not using default mode "640x350" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x400" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "720x400" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "800x600" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) CIRRUS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x960" (hsync out of range)
(II) CIRRUS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1280x1024" (hsync out of range)
(II) CIRRUS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CIRRUS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CIRRUS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) CIRRUS(0): Virtual size is 1280x1024 (pitch 1280)
(**) CIRRUS(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) CIRRUS(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) CIRRUS(0): *Driver mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) CIRRUS(0): *Driver mode "1280x1024": 128.9 MHz, 74.6 kHz, 70.0 Hz
(II) CIRRUS(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 -hsync +vsync (74.6 kHz)
(**) CIRRUS(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) CIRRUS(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(**) CIRRUS(0): *Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) CIRRUS(0): *Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) CIRRUS(0): *Driver mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(**) CIRRUS(0): *Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(**) CIRRUS(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) CIRRUS(0): *Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) CIRRUS(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) CIRRUS(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) CIRRUS(0): *Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) CIRRUS(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) CIRRUS(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) CIRRUS(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) CIRRUS(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) CIRRUS(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) CIRRUS(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) CIRRUS(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) CIRRUS(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) CIRRUS(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) CIRRUS(0): *Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) CIRRUS(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) CIRRUS(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) CIRRUS(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) CIRRUS(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) CIRRUS(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) CIRRUS(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) CIRRUS(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) CIRRUS(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) CIRRUS(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) CIRRUS(0): *Driver mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz
(II) CIRRUS(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(**) CIRRUS(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) CIRRUS(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) CIRRUS(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) CIRRUS(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) CIRRUS(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) CIRRUS(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) CIRRUS(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) CIRRUS(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) CIRRUS(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) CIRRUS(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) CIRRUS(0): Display dimensions: (330, 270) mm
(**) CIRRUS(0): DPI set to (98, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.2.1
    ABI class: X.Org Video Driver, version 5.0
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
LgScreenInit
(II) CIRRUS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
LgSave
LgModeInit 24 bpp,   135000   1280 1296 1440 1688   1024 1025 1028 1066
LgModeInit: depth 24 bits
SynthClock = 135000
LgSetClock freq=135.000MHz
LgSetClock: nom=42 den=e ffreq=134.998MHz

Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813278b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80dda61]
2: [0xb7faa400]
3: /usr/lib/xorg/modules/drivers//cirrus_laguna.so(LgAdjustFrame+0xba) [0xb7a49eaa]
4: /usr/lib/xorg/modules/drivers//cirrus_laguna.so(LgScreenInit+0x324) [0xb7a4a564]
5: /usr/bin/X(AddScreen+0x19d) [0x807167d]
6: /usr/bin/X(InitOutput+0x206) [0x80aeb16]
7: /usr/bin/X(main+0x1e1) [0x8071d61]
8: /lib/libc.so.6(__libc_start_main+0xe6) [0xb7b7ca36]
9: /usr/bin/X [0x8071401]

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

LgLeaveVT
LgRestore  pScrn = 0x91eb958

Offline

#2 2009-05-29 21:00:49

ebal
Member
From: Athens, Greece
Registered: 2009-05-26
Posts: 224
Website

Re: x11 hang the computer and monitor becomes black

try Xorg -configure to built a xorg.conf and try with this file.
check again that hal is running

install ssh to your box and login via a different pc (if any) to pkill X if it crashes.
reset isnt always the right solution

take a good look on http://wiki.archlinux.org/index.php/Xorg

finally try this (if you dont till now) pacman -Syu to upgrade your system and hopefully your xorg

https://balaskas.gr
Linux System Engineer - Registered Linux User #420129

Offline

#3 2009-05-29 21:15:17

rpereyra
Member
Registered: 2009-05-29
Posts: 2

Re: x11 hang the computer and monitor becomes black

Thanks ebal for your help !

> try Xorg -configure to built a xorg.conf and try with this file.

same error

> finally try this (if you dont till now) pacman -Syu to upgrade your system and hopefully your xorg

I have done and it does not solve the problem

>install ssh to your box and login via a different pc (if any) to pkill X if it crashes.
>reset isnt always the right solution

Thanks for the hint.

>take a good look on http://wiki.archlinux.org/index.php/Xorg

I read it but I find nothing to help me solve the problem.

Thanks again.

roberto

Offline

#4 2009-05-29 21:18:36

karol
Archivist
Registered: 2009-05-06
Posts: 25,440

Re: x11 hang the computer and monitor becomes black

an old user of linux (slack, debian ..).

Great :-) Could you start xterm from your .xinitrc to check if X is working? That "black screen" may be a black cursor on a black background.

Unresponsive mouse/kdb may mean you didn't install the proper drivers.

Last edited by karol (2009-05-29 21:25:50)

Offline

#5 2009-05-29 21:58:35

HashBox
Member
Registered: 2009-01-22
Posts: 271

Re: x11 hang the computer and monitor becomes black

This might be a bit far off, but try changing the drivers for your card (ie. between proprietary and open source ones if they're available), one other thing to try as a last resort is to boot your machine with the acpi=off and noacpi kernel flags, I know my Vaio laptop cannot run for longer than an hour with ACPI on as it causes random freezes as well as causing X to lock up the machine (can ssh in sometimes but X is unkillable).

Offline

Pages: 1

Board footer

Powered by FluxBB