You are not logged in.

Pages: 1

#1 2010-01-09 16:55:10

anti-destin
Member
Registered: 2009-02-14
Posts: 234

[kde] trouble coming out of standby: black screen + mouse

i'm running a fresh arch installation with kdebase on top. in power management > performance profile, i've configured the laptop go into standby mode (suspend to ram) when the system is idle for more than 30 mins., when the lid is closed, and when the sleep button is pressed.

the computer goes into standby mode properly. no issues there.

but when i try to get out of it, all i get is a black screen and a mouse cursor (which works fine). no desktop, no menus, no keyboard. the only thing i can do is do a hard power down.

any ideas? thanks.

edit: here's the log.

Initial commandline parameters: --quirk-dpms-suspend
--quirk-dpms-on
--quirk-vbestate-restore
--quirk-vbemode-restore
--quirk-vga-mode3
--quirk-vbe-post
Fri Jan  8 23:42:55 CST 2010: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux arch 2.6.32-ARCH #1 SMP PREEMPT Thu Jan 7 22:28:29 CET 2010 x86_64 Intel(R) Core(TM)2 Duo CPU T5450 @ 1.66GHz GenuineIntel GNU/Linux
Module                  Size  Used by
cryptd                  6076  0 
aes_x86_64              7420  2 
aes_generic            26178  1 aes_x86_64
radeon                563393  2 
ttm                    37153  1 radeon
drm_kms_helper         22299  1 radeon
drm                   153467  5 radeon,ttm,drm_kms_helper
i2c_algo_bit            4935  1 radeon
rfcomm                 35723  4 
sco                     8440  2 
bridge                 47293  0 
stp                     1552  1 bridge
llc                     3657  2 bridge,stp
bnep                    8690  2 
l2cap                  32231  16 rfcomm,bnep
btusb                  11532  2 
bluetooth              50361  9 rfcomm,sco,bnep,l2cap,btusb
snd_seq_dummy           1439  0 
ath_pci               227958  0 
snd_hda_codec_atihdmi     2683  1 
snd_seq_oss            29023  0 
snd_seq_midi_event      5316  1 snd_seq_oss
snd_seq                50558  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
wlan                  221904  1 ath_pci
ath_hal               373759  1 ath_pci
snd_hda_codec_realtek   250244  1 
arc4                    1354  2 
snd_seq_device          5181  3 snd_seq_dummy,snd_seq_oss,snd_seq
uvcvideo               59906  0 
videodev               35771  1 uvcvideo
v4l1_compat            15674  2 uvcvideo,videodev
v4l2_compat_ioctl32     9937  1 videodev
snd_hda_intel          21586  2 
snd_pcm_oss            39011  0 
snd_mixer_oss          17299  1 snd_pcm_oss
snd_hda_codec          63659  3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               6340  1 snd_hda_codec
snd_pcm                70318  3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
joydev                  9800  0 
ecb                     1953  2 
snd_timer              18799  2 snd_seq,snd_pcm
ohci_hcd               21485  0 
snd                    57408  15 snd_seq_oss,snd_seq,snd_hda_codec_realtek,snd_seq_device,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
ehci_hcd               34890  0 
i2c_piix4               8680  0 
soundcore               6095  1 snd
snd_page_alloc          7033  2 snd_hda_intel,snd_pcm
i2c_core               18137  5 radeon,drm,i2c_algo_bit,videodev,i2c_piix4
usbcore               140421  5 btusb,uvcvideo,ohci_hcd,ehci_hcd
ath5k                 124922  0 
video                  17979  0 
output                  1980  1 video
mac80211              165605  1 ath5k
fan                     3378  0 
ath                     8400  1 ath5k
cfg80211              122783  3 ath5k,mac80211,ath
rfkill                 15228  3 bluetooth,cfg80211
led_class               2577  1 ath5k
battery                 9388  0 
shpchp                 31012  0 
pci_hotplug            26576  1 shpchp
ac                      3027  0 
evdev                   8825  15 
wmi                     4771  0 
psmouse                56346  0 
thermal                11834  0 
button                  4714  0 
sky2                   45193  0 
sg                     25275  0 
serio_raw               4440  0 
processor              29574  2 
pcspkr                  1795  0 
rtc_cmos                8904  0 
rtc_core               14631  1 rtc_cmos
rtc_lib                 1810  1 rtc_core
ext4                  334927  2 
mbcache                 5466  1 ext4
jbd2                   80162  1 ext4
crc16                   1273  2 l2cap,ext4
sd_mod                 26313  4 
sr_mod                 15043  0 
cdrom                  36354  1 sr_mod
ahci                   34321  3 
pata_atiixp             3633  0 
ata_generic             3111  0 
pata_acpi               3288  0 
libata                151860  4 ahci,pata_atiixp,ata_generic,pata_acpi
scsi_mod               92676  4 sg,sd_mod,sr_mod,libata
             total       used       free     shared    buffers     cached
Mem:       1796496     351836    1444660          0      19776     122580
-/+ buffers/cache:     209480    1587016
Swap:      1012084          0    1012084
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
Allocated buffer at 0x11000 (base is 0x0)
ES: 0x1100 EBX: 0x0000
success.
Fri Jan  8 23:42:57 CST 2010: performing suspend
Sat Jan  9 03:08:50 CST 2010: Awake.
Sat Jan  9 03:08:50 CST 2010: Running hooks for resume
/usr/lib/pm-utils/sleep.d/99video resume suspend: Function not supported
Function not supported
success.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video resume suspend: success.
/usr/lib/pm-utils/sleep.d/95led resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq resume suspend: success.
/usr/lib/pm-utils/sleep.d/90clock resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/75modules resume suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager resume suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg resume suspend: success.
/usr/lib/pm-utils/sleep.d/01grub resume suspend: not applicable.
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
/usr/lib/pm-utils/sleep.d/00auto-quirk resume suspend: success.
Sat Jan  9 03:08:50 CST 2010: Finished.

Last edited by anti-destin (2010-01-09 18:05:10)

Offline

#2 2010-01-09 20:48:08

jxy
Member
Registered: 2008-12-03
Posts: 133

Re: [kde] trouble coming out of standby: black screen + mouse

I guess you can also do a Ctrl-Alt-F1, if you can still control your mouse, which means the system has not locked up.  Did you turn on kwin composition?  You may try Alt-Shift-F12 to toggle it and see if it helps.

Offline

#3 2010-01-09 21:37:29

anti-destin
Member
Registered: 2009-02-14
Posts: 234

Re: [kde] trouble coming out of standby: black screen + mouse

the keyboard doesn't work after coming out of standby, unfortunately.

the log looks fine, so i'm not sure what the problem is.

Offline

#4 2010-01-10 02:04:15

anti-destin
Member
Registered: 2009-02-14
Posts: 234

Re: [kde] trouble coming out of standby: black screen + mouse

some more information.

1. this is basically the problem i have: http://wiki.archlinux.org/index.php/Com … ry_drivers

blank screen + responsive cursor. however, i'm using neither compiz nor nvidia.

2. i tried typing 'sudo pm-suspend' from the console, but when i try to resume, the cursor is not the normal kde one, but a simple one. also, the cursor is not responsive.

3. i also tried editing mkinitcpio.conf (added 'resume' and removed 'autodetect'), but that didn't work.

Offline

#5 2010-01-10 02:28:28

securitybreach
Member
From: In front of my computers
Registered: 2007-11-18
Posts: 416
Website

Re: [kde] trouble coming out of standby: black screen + mouse

anti-destin wrote:

the keyboard doesn't work after coming out of standby, unfortunately.

the log looks fine, so i'm not sure what the problem is.

I am experiencing the same thing using Xmonad on my desktop. The screen goes black and xscreensaver does not start. The keyboard/mouse is then unresponsive. This started yesterday so it must of been one of the updates. Also, I run the nvidia 190.53-3 under x86_64.

Last edited by securitybreach (2010-01-10 02:30:26)

"Every normal man must be tempted at times to spit upon his hands, hoist the black flag, and begin slitting throats." -- H.L. Mencken
Website      Configs
Forum Admin: Bruno's All Things Linux   
securitybreach<a>archlinux.us

Offline

#6 2010-01-10 03:52:41

anti-destin
Member
Registered: 2009-02-14
Posts: 234

Re: [kde] trouble coming out of standby: black screen + mouse

securitybreach, does your pm-suspend.log look normal?

i just tried uswsusp. running 'sudo s2ram -f' works: suspend and resume work properly. however, i get serious graphical glitches after resuming.

Offline

#7 2010-01-10 04:04:29

securitybreach
Member
From: In front of my computers
Registered: 2007-11-18
Posts: 416
Website

Re: [kde] trouble coming out of standby: black screen + mouse

As far as I know I have no power managerment since this is a desktop

╔═ root@Venus 11:03 PM 
╚═══ /home/comhack-> updatedb 


╔═ comhack@Venus 11:03 PM 
╚═══ ~-> locate pm-suspend.log 

╔═ comhack@Venus 11:04 PM 
╚═══ ~->

I do have this though:

╔═ comhack@Venus 11:04 PM 
╚═══ ~-> cat /var/log/pm-powersave.log 
/usr/lib/pm-utils/power.d/sched-powersave false: **sched policy powersave OFF
success.

Last edited by securitybreach (2010-01-10 04:06:09)

"Every normal man must be tempted at times to spit upon his hands, hoist the black flag, and begin slitting throats." -- H.L. Mencken
Website      Configs
Forum Admin: Bruno's All Things Linux   
securitybreach<a>archlinux.us

Offline

#8 2010-01-10 17:42:47

anti-destin
Member
Registered: 2009-02-14
Posts: 234

Re: [kde] trouble coming out of standby: black screen + mouse

getting close!

i just tried 'sudo pm-suspend --auto-quirks' and suspend/resume worked perfectly (and rather quickly, i should add).

how do i make that the default command?

edit: nevermind. i spoke too soon. now when i type 'sudo pm-suspend --auto-quirks', suspend works fine, but when i try to resume, i end up with a black screen and an unresponsive cursor. this is worse than before.

however, i did discover something. i added a file called 00auto-quirk to /etc/pm/sleep.d, and while i was able to resume properly, i had severe graphical problems.

Last edited by anti-destin (2010-01-10 18:53:33)

Offline

#9 2010-01-12 02:00:10

h2vnteam
Member
From: Saigon - vietnam
Registered: 2009-09-23
Posts: 10
Website

Re: [kde] trouble coming out of standby: black screen + mouse

Hi guys,

I'm just a new comer to Archlinux, and I'm a chemist who do not know much about linux. I've had the same problem resuming my laptop after suspension, especially, the mouse does not function anymore. I've got pm-utils, uswsusp, hibernate-script installed.

Start to search on the internet and turn out you guys are facing the same thing. After spending one week configuring the code with Vim, finally I cracked it. It's a simple tweak.

Put your config file named 'modules' into /etc/pm/config.d/ with the following line : 

SUSPEND_MODULES="button"

My previous configuration was:

SUSPEND_MODULES="button uhci_hcd"

After deleting the "uhci_hcd" the machine resumes smoothly, because when I set "uhci_hcd" all the comonents is brought down but unable to be back again, that was why my mouse, monitor did not function.

Hope this tip will be helpful to avoid hair-scratching.

Cheer

Henry

Offline

#10 2010-01-12 04:40:21

anti-destin
Member
Registered: 2009-02-14
Posts: 234

Re: [kde] trouble coming out of standby: black screen + mouse

thanks for the suggestion. i just tried it, but unfortunately, it doesn't work for me.

Offline

#11 2010-01-12 05:30:09

h2vnteam
Member
From: Saigon - vietnam
Registered: 2009-09-23
Posts: 10
Website

Re: [kde] trouble coming out of standby: black screen + mouse

Just seen your log file, it seems to be problematic with graphical card right?

One more try, just append 2 lines below to the modules file mentioned in the previous post.

SLEEP_MODULE="tuxonice uswsusp kernel" 
HIBERNATE_MODE="shutdown"

As you said that 

pm-suspend --auto-quirks

works nicely for you, then why don't you create your own hook or let it interact with HAL, something like :

# We only support pm-utils...not anymore!
if [ -x "/usr/sbin/pm-suspend" ] ; then
  # Suspend2 tools installed
  /usr/sbin/pm-suspend --auto-quirks
  RET=$?
elif [ -x /usr/sbin/hibernate ] ; then
  /usr/sbin/hibernate --force
  RET=$?
else
  unsupported
fi

Not easy at all.
good luck !

Last edited by h2vnteam (2010-01-12 05:47:48)

Offline

#12 2010-01-24 02:24:57

anti-destin
Member
Registered: 2009-02-14
Posts: 234

Re: [kde] trouble coming out of standby: black screen + mouse

some more information.

1. the above suggestions didn't work.
2. i've noticed that suspend/resume seems to work properly when programs (e.g., browser, file manager, etc.) are open, but not when there are no programs open. what might explain this?

Offline

#13 2010-01-25 04:10:59

anti-destin
Member
Registered: 2009-02-14
Posts: 234

Re: [kde] trouble coming out of standby: black screen + mouse

i've narrowed down the problem. it seems to be a graphics issue.

first observation: any screen-blanking event (e.g., suspend to ram, switching to a virtual terminal, etc.) triggers the problem.
second observation: when compositing is disabled, everything works fine. i can resume properly, i can switch between the virtual terminals and the gui, etc. without any issues.
third observation: when compositing is disabled, i can return to the gui without any trouble. but as soon as i enable compositing, the screen turns black and all that remains is the mouse cursor. i can see the screen go blank.

Offline

#14 2010-02-04 22:11:08

marcinq3
Member
From: Poland
Registered: 2009-11-15
Posts: 2
Website

Re: [kde] trouble coming out of standby: black screen + mouse

Hi guys

I have similar problem but my mouse doesn't work. To restart my laptop I use magic commands.

In my system is kernel26-ck from AUR, xf86-video-ati (ATI X1400) and pm-utils with powerdevil.


After last crash I discovered in my Xorg.0.log.old something like this::

(II) RADEON(0): RADEONRestoreMemMapRegisters() :                                                 
(II) RADEON(0):   MC_FB_LOCATION   : 0xc7ffc000 0xc7ffc000                                       
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000                                                  
(II) RADEON(0): avivo_restore !                                                                  
Enable CRTC 0 success                                                                            
Unblank CRTC 0 success                                                                           

Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809bd9b]
1: /usr/bin/X (0x8048000+0x520e5) [0x809a0e5]  
2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb785140c]
3: /usr/lib/libpixman-1.so.0 (0xb7791000+0x4bf9c) [0xb77dcf9c]
4: /usr/lib/libpixman-1.so.0 (0xb7791000+0x144b7) [0xb77a54b7]
5: /usr/lib/libpixman-1.so.0 (pixman_fill+0x5c) [0xb77ca5dc]  
6: /usr/lib/xorg/modules/libfb.so (fbFill+0x23d) [0xb70f00ad]
7: /usr/lib/xorg/modules/libfb.so (fbPolyFillRect+0x148) [0xb70f0468]
8: /usr/lib/xorg/modules/libxaa.so (0xb708e000+0x4b2bc) [0xb70d92bc]
9: /usr/bin/X (0x8048000+0xcfe25) [0x8117e25]
10: /usr/bin/X (miPaintWindow+0x1c2) [0x808cc32]
11: /usr/bin/X (miWindowExposures+0xc7) [0x808cfc7]
12: /usr/lib/xorg/modules/extensions/libdri.so (DRIWindowExposures+0x9a) [0xb7832bba]
13: /usr/bin/X (0x8048000+0x115afb) [0x815dafb]
14: /usr/bin/X (miHandleValidateExposures+0x78) [0x816d928]
15: /usr/bin/X (MapWindow+0x227) [0x8086ee7]
16: /usr/bin/X (0x8048000+0x267f9) [0x806e7f9]
17: /usr/bin/X (0x8048000+0x27567) [0x806f567]
18: /usr/bin/X (0x8048000+0x1a685) [0x8062685]
19: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7477b86]
20: /usr/bin/X (0x8048000+0x1a271) [0x8062271]
Segmentation fault at address 0x6337d0

Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting


Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) Video Bus: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"

Last edited by marcinq3 (2010-02-04 22:12:28)

Offline

#15 2011-03-22 13:08:57

mikesol
Member
From: Toulouse, France
Registered: 2011-02-01
Posts: 14

Re: [kde] trouble coming out of standby: black screen + mouse

I have the same problem here. I'm using KDE 4.6 with Kwin activated. When i change the profile of energy to Performance the screen turn on black with only the mouse available.

The only way to access to the desktop again it's disabling Kwin (Alt + Shift +F12)

I checked the X.org.0.log and i found this 

$ cat /var/log/Xorg.0.log
[ 15764.544] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 15764.545] _XSERVTransMakeAllCOTSServerListeners: server already running
[ 15764.545] 
Fatal server error:
[ 15764.547] Cannot establish any listening sockets - Make sure an X server isn't already running
[ 15764.547] 
Please consult the The X.Org Foundation support 
         at http://wiki.x.org
 for help. 
[ 15764.551] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 15764.551]

Last edited by mikesol (2011-03-22 13:11:07)

--
Sorry for my English.

Offline

Pages: 1

Board footer

Powered by FluxBB