You are not logged in.
I think I have things set up correctly, but Arch will not find my sound card.
The sound "card" is integrated into an nForce550 Gigabyte M55S-S3 motherboard:
lspci|grep Audio
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
Part of dmesg afther booting:
[root@. karel]# dmesg | grep intel
[<f8f2bdc0>] azx_interrupt+0x0/0xf0 [snd_hda_intel]
[<f8f2b192>] azx_acquire_irq+0x32/0x80 [snd_hda_intel]
[<f8f2c15b>] azx_probe+0x17b/0x810 [snd_hda_intel]
hda-intel: unable to grab IRQ 15, disabling device
Modules are loaded I think:
karel@. lsmod | grep snd
snd_seq_oss 29440 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 47056 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_pcm_oss 38944 0
snd_mixer_oss 14464 1 snd_pcm_oss
snd_hda_intel 15768 0
snd_hda_codec 156800 1 snd_hda_intel
snd_pcm 68612 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 18948 2 snd_seq,snd_pcm
snd 44004 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd _mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer
soundcore 6624 1 snd
snd_page_alloc 7816 2 snd_hda_intel,snd_pcm
But there's nothing in /dev:
ls /dev/snd
seq timer
I *think* the problem is with hda-intel: unable to grab IRQ 15, disabling device, but don't know what I could do with it.
There's not much about it on Google, only a mail about a patch to alsa(?) if I get it right.
I have tried to boot with pci=biosirq, pci=routeirq, without any success.
Please help :-)
Last edited by sessy (2007-01-28 13:09:05)
Offline
Not sure that it will help, but you could try the following boot parameter:
pci=assign-busses
Mortuus in anima, curam gero cutis
Offline
You might try fiddling with BIOS settings.
Offline
Sorry, I read only now the google link you posted. What the patch you refer to does can be done with the following boot parameter:
pci=nomsi
Mortuus in anima, curam gero cutis
Offline
You might try fiddling with BIOS settings.
That's what helped!
I have disabled IDE, paralell and serial port in BIOS, and the sound card is detected, Amarok is already bangin'
I have tried the pci= kernel option, but they had no effect.
Thanks for the ideas and help!
(ps: can i change the topic title to [solved] somehow?)
Offline
Yes, you can edit your first post and you should be prompted to change also the title.
Mortuus in anima, curam gero cutis
Offline
Thanks patroclo7!
Yes, you can edit your first post and you should be prompted to change also the title.
Offline