You are not logged in.
Pages: 1
Hi all. I'm italian boy, sorry for my english.
I have a problem with kino. Do not capture from the camera. Launch kino from root and obtain:
AVVISO: il modulo del kernel raw1394 non è caricato o errore leggendo/scrivendo /devraw1394!
in english:
The kernel module raw1394 is not loaded or error reading/writing /devraw1394!
There is a problem with /devraw1394 but if I launch lsmod:
[tiziano@localhost ~]$ lsmod | grep 1394
raw1394 27312 0
dv1394 19856 0
ohci1394 33608 1 dv1394
ieee1394 93144 3 raw1394,dv1394,ohci1394
The modules seem to be...
It's very important for me capture from camera. I change from debian to arch because arch it's very KISS
Thanks.
Last edited by monotiz (2007-10-20 17:32:05)
Offline
The problem remains. I asked other forum but nobody seems to understand what is the problem. Unfortunately, if nobody helps me, I can not remain under archlinux and I regret.
Offline
Hi monotiz,
is /devraw1394 right? Check the config in Kino and have a "ls" in dev. Is there a /dev/raw1394 available? Maybe it is under /dev/raw/raw1394.
delco
Last edited by delco (2007-11-05 21:31:24)
Offline
Hi monotiz,
is /devraw1394 right? Check the config in Kino and have a "ls" in dev. Is there a /dev/raw1394 available? Maybe it is under /dev/raw/raw1394.
delco
/dev/raw1394 is available. The problem is not kino. I launch testlibraw and it return that I have 0 ieee card?????
Offline
Your user should be in the video group; gpasswd -a monotiz video. Then logout and -in and try again.
Last edited by byte (2007-11-05 23:46:19)
1000
Offline
Your user should be in the video group; gpasswd -a monotiz video. Then logout and -in and try again.
I'm doing all from root....
Offline
Is kino working ok?
Maybe try it with dvgrab to record a small video from the camcorder.
Is there a firewire-* module loaded also?
Offline
Is kino working ok?
Maybe try it with dvgrab to record a small video from the camcorder.Is there a firewire-* module loaded also?
I'm correctly use firewire and kino on arch64 don't panic 2007.08.
The problem is on 2007.08-2.
The firewire modules seem to be loaded.
[tiziano@dhcppc0 ~]$ lsmod | grep firewire
firewire_ohci 17792 0
firewire_core 41792 1 firewire_ohci
crc_itu_t 2560 1 firewire_core
[tiziano@dhcppc0 ~]$
dvgrab:
[root@dhcppc0 tiziano]# dvgrab
Error: no camera exists
[root@dhcppc0 tiziano]#
testlibraw:
[root@dhcppc0 tiziano]# testlibraw
successfully got handle
current generation number: 0
0 card(s) found
[root@dhcppc0 tiziano]#
dmesg:
[root@dhcppc0 tiziano]# dmesg | grep firewire
firewire_ohci: Added fw-ohci device 0000:02:0e.0, OHCI version 1.10
firewire_core: created new fw device fw0 (0 config rom retries, S400)
firewire_core: created new fw device fw1 (0 config rom retries, S100)
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[root@dhcppc0 tiziano]# dmesg | grep 1394
ieee1394: raw1394: /dev/raw1394 device initialized
NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
[root@dhcppc0 tiziano]#
lspci:
[root@dhcppc0 tiziano]# lspci | grep 1394
02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
[root@dhcppc0 tiziano]#
Offline
maybe a stupid question
Is the firewire cable correct plugged in and not broken?
Offline
maybe a stupid question
Is the firewire cable correct plugged in and not broken?
I have create a partition with xubuntu for use the firewire, and I correctly capture from camera. The cable are ok!
Offline
Strange!
I've never had such a problem with firewire on arch.
Do you have a fresh install with no or less customization?
Some changes in udev rules or entries in fstab?
Is the permission for the raw1394 correct? I mean not if root is the owner. I mean the file rights -rw-rw-rw.
Offline
Strange!
I've never had such a problem with firewire on arch.
Do you have a fresh install with no or less customization?
Some changes in udev rules or entries in fstab?Is the permission for the raw1394 correct? I mean not if root is the owner. I mean the file rights -rw-rw-rw.
Today I reinstall arch from core install CD.
The root permission for raw1394 are ok.
P.S. Thank for the moment!
Offline
Well.
I'm just istall archlinux for 686 machine. Next, I have install dvgrab and it's run!!!!
Change only dmesg (this is arch 32bit):
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fb008000-fb0087ff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea000049ddc7]
ieee1394: Node added: ID:BUS[0-00:1023] GUID[08004601043bac0e]
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
ieee1394: raw1394: /dev/raw1394 device initialized
The problem is on arch 64 bit.
Offline
for me nothing is working ... I'm testing out everything permissions rmmod the dv1394 :
lspci
02:09.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
dmesg | grep firewire
firewire_ohci: Added fw-ohci device 0000:02:09.2, OHCI version 1.10
firewire_core: created new fw device fw0 (0 config rom retries, S400)
firewire_core: created new fw device fw1 (0 config rom retries, S100)
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
dmesg | grep raw1394
NOTE: The dv1394 driver is unsupported and may be removed in a future Linux release. Use raw1394 instead.
ieee1394: raw1394: /dev/raw1394 device initialized
dmesg | grep video1394
video1394: Installed video1394 module
all seems to be loaded and running but with:
gscanbus
couldn't set port: Invalid argument
dvgrab
Error: no camera exists
and with kino it is the same: raw module can't be loaded....
i find for the Package libraw1394 that it is no longer maintained?
http://www.archlinux.org/packages/838/
>>> LastUpdated: 2006-04-10
for that i test to make a new Package (1.3.0) but it return in the same problems...
No one can help out??????
Last edited by killajoe (2007-11-15 22:50:34)
Cancel me not -- for what then shall remain?
Abscissas, some mantissas, modules, modes, A root or two, a torus and a node:
The inverse of my verse, a null domain.
-- Stanislaw Lem, The Cyberiad
Offline
I found a way...
I remove firewire-core and firewire-ohci modules. Next I have load the old modules. This is the result:
[tiziano@myhost ~]$ lsmod | grep firewire
[tiziano@myhost ~]$
[tiziano@myhost ~]$ lsmod | grep 1394
raw1394 23932 0
dv1394 16988 0
ohci1394 28848 1 dv1394
ieee1394 80184 3 raw1394,dv1394,ohci1394
[tiziano@myhost ~]$
Dvgrab result:
[root@myhost tiziano]# dvgrab
Found AV/C device with GUID 0x08004601043bac0e
"" 0.00 MB 0 frames
Capture Stopped
Error: no DV
[root@myhost tiziano]#
My Arch don't capture but this is a great result for me!
EDIT: I'm stupid. I try to capture from tape on finish position. I rewind 2 minute and arch capture. Finally.
Last edited by monotiz (2007-11-17 20:00:34)
Offline
for now the Problem seems to be solved in actual ARCH64 system!
Cancel me not -- for what then shall remain?
Abscissas, some mantissas, modules, modes, A root or two, a torus and a node:
The inverse of my verse, a null domain.
-- Stanislaw Lem, The Cyberiad
Offline
Pages: 1