You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 Yesterday 17:41:18
- Elizabeth
- Member
- Registered: 2023-10-06
- Posts: 52
Weird stuttering with a second monitor
Hello, recently I've been experiencing weird stuttering on my second monitor, and im not quite sure what it is?
I dont know much about hardware or why this might be happening so I sadly cant provide much info on my own.
The best I have so far is the following:
- I am using the framework model 13
- I have the second monitor connected via a displayport cable
- When I turn DPMS off on my built in monitor the stuttering on the second one stops,
- The built in monitor experiences no stuttering even when the other monitor is turned on
- There is no weird cpu or (from what I can see) GPU load, and thermals with nothing open are all between 30 and 40 degrees celsius.
- The monitor stutters even if I have nothing but a graphical session open
- This did not use to be an issue in the past
I hope someone more experienced than me can help me figure out whats going in, and I thank them in advance
Small edit: this seems to be an issue with niri specifically, as sway has zero stuttering.
Bellow is my installed version of niri:
- niri 26.04-1
Last edited by Elizabeth (Yesterday 17:44:08)
Offline
#2 Yesterday 19:46:22
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,706
Re: Weird stuttering with a second monitor
lspci -d ::3xx
for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; doneYou'll need https://archlinux.org/packages/extra/x86_64/v4l-utils/ for the latter.
Blue note in https://wiki.archlinux.org/title/PRIME#Reverse_PRIME ?
Except for
This did not use to be an issue in the past
=> /var/log/pacman.log - what was updated to cause this?
Offline
#3 Today 11:33:43
- Elizabeth
- Member
- Registered: 2023-10-06
- Posts: 52
Re: Weird stuttering with a second monitor
doing
lspci -d ::3xx c1:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Phoenix1 (rev cb)doing
for OUT in /sys/class/drm/card*; do echo $OUT; edid-decode $OUT/edid; echo "================="; done /sys/class/drm/card1
=================
/sys/class/drm/card1-DP-1
EDID of '/sys/class/drm/card1-DP-1/edid' was empty.
=================
/sys/class/drm/card1-DP-2
EDID of '/sys/class/drm/card1-DP-2/edid' was empty.
=================
/sys/class/drm/card1-DP-3
edid-decode (hex):
00 ff ff ff ff ff ff 00 41 0c b5 08 a7 4c 0c 00
08 16 01 04 a5 35 1e 78 ee 29 b0 a4 56 4f 9e 28
11 50 54 bf ef 80 71 40 81 c0 81 80 95 00 b3 00
01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
45 00 13 2b 21 00 00 1e 00 00 00 ff 00 44 4c 31
31 32 30 38 38 30 36 30 35 35 00 00 00 fc 00 32
34 31 50 4c 52 59 0a 20 20 20 20 20 00 00 00 fd
00 38 4c 1e 53 11 00 0a 20 20 20 20 20 20 01 2b
02 03 24 f1 4f 01 02 03 04 05 06 07 10 11 12 13
14 15 16 00 23 09 87 07 83 01 00 00 67 03 0c 00
10 00 00 2d 02 3a 80 18 71 38 2d 40 58 2c 45 00
13 2b 21 00 00 1f 01 1d 80 18 71 1c 16 20 58 2c
25 00 13 2b 21 00 00 9f 01 1d 00 72 51 d0 1e 20
6e 28 55 00 13 2b 21 00 00 1e 8c 0a d0 8a 20 e0
2d 10 10 3e 96 00 13 2b 21 00 00 18 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 36
----------------
Block 0, Base EDID:
EDID Structure Version & Revision: 1.4
Vendor & Product Identification:
Manufacturer: PHL
Model: 2229
Serial Number: 806055 (0x000c4ca7)
Made in: week 8 of 2012
Basic Display Parameters & Features:
Digital display
Bits per primary color channel: 8
DisplayPort interface
Maximum image size: 53 cm x 30 cm
Gamma: 2.20
DPMS levels: Standby Suspend Off
Supported color formats: RGB 4:4:4, YCrCb 4:4:4
Default (sRGB) color space is primary color space
First detailed timing includes the native pixel format and preferred refresh rate
Color Characteristics:
Red : 0.6406, 0.3378
Green: 0.3105, 0.6181
Blue : 0.1582, 0.0693
White: 0.3125, 0.3281
Established Timings I & II:
IBM : 720x400 70.081663 Hz 9:5 31.467 kHz 28.320000 MHz
DMT 0x04: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
Apple : 640x480 66.666667 Hz 4:3 35.000 kHz 30.240000 MHz
DMT 0x05: 640x480 72.808802 Hz 4:3 37.861 kHz 31.500000 MHz
DMT 0x06: 640x480 75.000000 Hz 4:3 37.500 kHz 31.500000 MHz
DMT 0x08: 800x600 56.250000 Hz 4:3 35.156 kHz 36.000000 MHz
DMT 0x09: 800x600 60.316541 Hz 4:3 37.879 kHz 40.000000 MHz
DMT 0x0a: 800x600 72.187572 Hz 4:3 48.077 kHz 50.000000 MHz
DMT 0x0b: 800x600 75.000000 Hz 4:3 46.875 kHz 49.500000 MHz
Apple : 832x624 74.551266 Hz 4:3 49.726 kHz 57.284000 MHz
DMT 0x10: 1024x768 60.003840 Hz 4:3 48.363 kHz 65.000000 MHz
DMT 0x11: 1024x768 70.069359 Hz 4:3 56.476 kHz 75.000000 MHz
DMT 0x12: 1024x768 75.028582 Hz 4:3 60.023 kHz 78.750000 MHz
DMT 0x24: 1280x1024 75.024675 Hz 5:4 79.976 kHz 135.000000 MHz
Apple : 1152x870 75.061550 Hz 192:145 68.681 kHz 100.000000 MHz
Standard Timings:
GTF : 1152x864 60.000000 Hz 4:3 53.700 kHz 81.624000 MHz
DMT 0x55: 1280x720 60.000000 Hz 16:9 45.000 kHz 74.250000 MHz
DMT 0x23: 1280x1024 60.019740 Hz 5:4 63.981 kHz 108.000000 MHz
DMT 0x2f: 1440x900 59.887445 Hz 16:10 55.935 kHz 106.500000 MHz
DMT 0x3a: 1680x1050 59.954250 Hz 16:10 65.290 kHz 146.250000 MHz
Detailed Timing Descriptors:
DTD 1: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (531 mm x 299 mm)
Hfront 88 Hsync 44 Hback 148 Hpol P
Vfront 4 Vsync 5 Vback 36 Vpol P
Display Product Serial Number: 'DL11208806055'
Display Product Name: '241PLRY'
Display Range Limits:
Monitor ranges (GTF): 56-76 Hz V, 30-83 kHz H, max dotclock 170 MHz
Extension blocks: 1
Checksum: 0x2b
----------------
Block 1, CTA-861 Extension Block:
Revision: 3
Underscans IT Video Formats by default
Basic audio support
Supports YCbCr 4:4:4
Supports YCbCr 4:2:2
Native detailed modes: 1
Video Data Block:
VIC 1: 640x480 59.940476 Hz 4:3 31.469 kHz 25.175000 MHz
VIC 2: 720x480 59.940060 Hz 4:3 31.469 kHz 27.000000 MHz
VIC 3: 720x480 59.940060 Hz 16:9 31.469 kHz 27.000000 MHz
VIC 4: 1280x720 60.000000 Hz 16:9 45.000 kHz 74.250000 MHz
VIC 5: 1920x1080i 60.000000 Hz 16:9 33.750 kHz 74.250000 MHz
VIC 6: 1440x480i 59.940060 Hz 4:3 15.734 kHz 27.000000 MHz
VIC 7: 1440x480i 59.940060 Hz 16:9 15.734 kHz 27.000000 MHz
VIC 16: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz
VIC 17: 720x576 50.000000 Hz 4:3 31.250 kHz 27.000000 MHz
VIC 18: 720x576 50.000000 Hz 16:9 31.250 kHz 27.000000 MHz
VIC 19: 1280x720 50.000000 Hz 16:9 37.500 kHz 74.250000 MHz
VIC 20: 1920x1080i 50.000000 Hz 16:9 28.125 kHz 74.250000 MHz
VIC 21: 1440x576i 50.000000 Hz 4:3 15.625 kHz 27.000000 MHz
VIC 22: 1440x576i 50.000000 Hz 16:9 15.625 kHz 27.000000 MHz
Audio Data Block:
Linear PCM:
Max channels: 2
Supported sample rates (kHz): 48 44.1 32
Supported sample sizes (bits): 24 20 16
Speaker Allocation Data Block:
FL/FR - Front Left/Right
Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
Source physical address: 1.0.0.0
Maximum TMDS clock: 225 MHz
Detailed Timing Descriptors:
DTD 2: 1920x1080 60.000000 Hz 16:9 67.500 kHz 148.500000 MHz (531 mm x 299 mm)
Hfront 88 Hsync 44 Hback 148 Hpol P
Vfront 4 Vsync 5 Vback 36 Vpol P
DTD 3: 1920x1080i 60.000000 Hz 16:9 33.750 kHz 74.250000 MHz (531 mm x 299 mm)
Hfront 88 Hsync 44 Hback 148 Hpol P
Vfront 2 Vsync 5 Vback 15 Vpol P Vfront +0.5 Odd Field
Vfront 2 Vsync 5 Vback 15 Vpol P Vback +0.5 Even Field
DTD 4: 1280x720 60.000000 Hz 16:9 45.000 kHz 74.250000 MHz (531 mm x 299 mm)
Hfront 110 Hsync 40 Hback 220 Hpol P
Vfront 5 Vsync 5 Vback 20 Vpol P
DTD 5: 720x480 59.940060 Hz 3:2 31.469 kHz 27.000000 MHz (531 mm x 299 mm)
Hfront 16 Hsync 62 Hback 60 Hpol N
Vfront 9 Vsync 6 Vback 30 Vpol N
Checksum: 0x36 (should be 0xd5) Unused space in Extension Block: 19 bytes
=================
/sys/class/drm/card1-DP-4
EDID of '/sys/class/drm/card1-DP-4/edid' was empty.
=================
/sys/class/drm/card1-DP-5
EDID of '/sys/class/drm/card1-DP-5/edid' was empty.
=================
/sys/class/drm/card1-DP-6
EDID of '/sys/class/drm/card1-DP-6/edid' was empty.
=================
/sys/class/drm/card1-DP-7
EDID of '/sys/class/drm/card1-DP-7/edid' was empty.
=================
/sys/class/drm/card1-DP-8
EDID of '/sys/class/drm/card1-DP-8/edid' was empty.
=================
/sys/class/drm/card1-eDP-1
edid-decode (hex):
00 ff ff ff ff ff ff 00 09 e5 ca 0b 00 00 00 00
2f 20 01 04 a5 1c 13 78 03 de 50 a3 54 4c 99 26
0f 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 11 5c d0 18 81 e0 2d 50 30 20
36 00 1d be 10 00 00 1a a7 49 d0 18 81 e0 2d 50
30 20 36 00 1d be 10 00 00 1a 00 00 00 fe 00 42
4f 45 20 43 51 0a 20 20 20 20 20 20 00 00 00 fe
00 4e 45 31 33 35 46 42 4d 2d 4e 34 31 0a 00 73
----------------
Block 0, Base EDID:
EDID Structure Version & Revision: 1.4
Vendor & Product Identification:
Manufacturer: BOE
Model: 3018
Made in: week 47 of 2022
Basic Display Parameters & Features:
Digital display
Bits per primary color channel: 8
DisplayPort interface
Maximum image size: 28 cm x 19 cm
Gamma: 2.20
Supported color formats: RGB 4:4:4
First detailed timing includes the native pixel format and preferred refresh rate
Display supports continuous frequencies
Color Characteristics:
Red : 0.6396, 0.3291
Green: 0.2998, 0.5996
Blue : 0.1494, 0.0595
White: 0.3125, 0.3281
Established Timings I & II: none
Standard Timings: none
Detailed Timing Descriptors:
DTD 1: 2256x1504 59.998513 Hz 3:2 92.938 kHz 235.690000 MHz (285 mm x 190 mm)
Hfront 48 Hsync 32 Hback 200 Hpol P
Vfront 3 Vsync 6 Vback 36 Vpol N
DTD 2: 2256x1504 47.998302 Hz 3:2 74.349 kHz 188.550000 MHz (285 mm x 190 mm)
Hfront 48 Hsync 32 Hback 200 Hpol P
Vfront 3 Vsync 6 Vback 36 Vpol N
Alphanumeric Data String: 'BOE CQ'
Alphanumeric Data String: 'NE135FBM-N41'
Checksum: 0x73
=================
/sys/class/drm/card1-Writeback-1
EDID of '/sys/class/drm/card1-Writeback-1/edid' was empty.
=================As for pacman logs, im showing the logs from the 23rd of last month to the 6th of the current, since I know this wasnt an issue before and that I definitely noticed it by the 6th
Edit: you can probably ignore everything before the 28th, as I remember doing things which would have made me notice the stutter but I do not remember noticing it. Furthermore, I think the update on the 3rd of the current month might be the culprit as I also do not remember any stuttering on that day (since i did not restart my system after the update) despite doing stuff which would make me notice it.
[2026-08-23T13:57:33+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-23T13:57:33+0200] [PACMAN] synchronizing package lists
[2026-08-23T13:57:36+0200] [PACMAN] starting full system upgrade
[2026-08-23T13:59:04+0200] [ALPM] running '60-mkinitcpio-remove.hook'...
[2026-08-23T13:59:05+0200] [ALPM] running '71-dkms-remove.hook'...
[2026-08-23T13:59:05+0200] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod v4l2loopback/0.15.4 -k 7.1.8-arch1-3
[2026-08-23T13:59:06+0200] [ALPM-SCRIPTLET] ==> depmod 7.1.8-arch1-3
[2026-08-23T13:59:07+0200] [ALPM] transaction started
[2026-08-23T13:59:07+0200] [ALPM] upgraded iana-etc (20260530-1 -> 20260617-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded abseil-cpp (20260526.0-2 -> 20260817.0-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded jansson (2.15.0-1 -> 2.15.1-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded dkms (3.4.2-1 -> 3.4.3-2)
[2026-08-23T13:59:07+0200] [ALPM] upgraded lib32-libelf (0.196-1 -> 0.196-2)
[2026-08-23T13:59:07+0200] [ALPM] upgraded lib32-libnm (1.58.1-1 -> 1.58.1-2)
[2026-08-23T13:59:07+0200] [ALPM] upgraded mesa (1:26.1.8-1 -> 1:26.2.1-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded lib32-mesa (1:26.1.8-1 -> 1:26.2.1-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded vulkan-mesa-implicit-layers (1:26.1.8-1 -> 1:26.2.1-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded lib32-vulkan-mesa-implicit-layers (1:26.1.8-1 -> 1:26.2.1-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded vulkan-radeon (1:26.1.8-1 -> 1:26.2.1-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded lib32-vulkan-radeon (1:26.1.8-1 -> 1:26.2.1-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded libdeflate (1.25-1 -> 1.26-1)
[2026-08-23T13:59:07+0200] [ALPM] upgraded poppler (26.07.0-1 -> 26.08.0-1)
[2026-08-23T13:59:08+0200] [ALPM] upgraded libreoffice-still (25.8.7-6 -> 25.8.7-7)
[2026-08-23T13:59:09+0200] [ALPM] upgraded linux (7.1.8.arch1-3 -> 7.1.9.arch1-2)
[2026-08-23T13:59:11+0200] [ALPM] upgraded linux-headers (7.1.8.arch1-3 -> 7.1.9.arch1-2)
[2026-08-23T13:59:11+0200] [ALPM] upgraded poppler-glib (26.07.0-1 -> 26.08.0-1)
[2026-08-23T13:59:11+0200] [ALPM] upgraded poppler-qt6 (26.07.0-1 -> 26.08.0-1)
[2026-08-23T13:59:11+0200] [ALPM] upgraded protobuf (35.1-1 -> 35.1-2)
[2026-08-23T13:59:11+0200] [ALPM] upgraded re2 (2:2025.11.05-5 -> 2:2025.11.05-6)
[2026-08-23T13:59:11+0200] [ALPM] upgraded steam-devices (1.0.0.87-1 -> 1.0.0.87-3)
[2026-08-23T13:59:11+0200] [ALPM] upgraded steam (1.0.0.87-1 -> 1.0.0.87-3)
[2026-08-23T13:59:11+0200] [ALPM] upgraded ttf-jetbrains-mono-nerd (3.5.1-1 -> 3.5.1-2)
[2026-08-23T13:59:11+0200] [ALPM] upgraded usbguard (1.1.4-8 -> 1.1.4-9)
[2026-08-23T13:59:11+0200] [ALPM] upgraded webrtc-audio-processing (2.1-8 -> 2.1-9)
[2026-08-23T13:59:11+0200] [ALPM] transaction completed
[2026-08-23T13:59:12+0200] [ALPM] running '21-systemd-tmpfiles.hook'...
[2026-08-23T13:59:12+0200] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2026-08-23T13:59:12+0200] [ALPM] running '30-update-mime-database.hook'...
[2026-08-23T13:59:12+0200] [ALPM] running '35-systemd-enqueue-marked.hook'...
[2026-08-23T13:59:12+0200] [ALPM] running '35-systemd-udev-reload.hook'...
[2026-08-23T13:59:13+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-23T13:59:13+0200] [ALPM] running '60-depmod.hook'...
[2026-08-23T13:59:14+0200] [ALPM] running '70-dkms-install.hook'...
[2026-08-23T13:59:14+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod v4l2loopback/0.15.4 -k 7.1.9-arch1-2
[2026-08-23T13:59:16+0200] [ALPM-SCRIPTLET] ==> depmod 7.1.9-arch1-2
[2026-08-23T13:59:19+0200] [ALPM] running '90-mkinitcpio-install.hook'...
[2026-08-23T13:59:20+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2026-08-23T13:59:20+0200] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-08-23T13:59:20+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -U /boot/EFI/Linux/arch-linux.efi -g /boot/initramfs-linux.img
[2026-08-23T13:59:20+0200] [ALPM-SCRIPTLET] ==> Starting build: '7.1.9-arch1-2'
[2026-08-23T13:59:20+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2026-08-23T13:59:20+0200] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
[2026-08-23T13:59:21+0200] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2026-08-23T13:59:21+0200] [ALPM-SCRIPTLET] -> Running build hook: [microcode]
[2026-08-23T13:59:21+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2026-08-23T13:59:21+0200] [ALPM-SCRIPTLET] -> Running build hook: [kms]
[2026-08-23T13:59:24+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2026-08-23T13:59:24+0200] [ALPM-SCRIPTLET] -> Running build hook: [sd-vconsole]
[2026-08-23T13:59:24+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2026-08-23T13:59:25+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2026-08-23T13:59:25+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2026-08-23T13:59:25+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-08-23T13:59:25+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] -> Early uncompressed CPIO image generation successful
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] ==> Creating unified kernel image: '/boot/EFI/Linux/arch-linux.efi'
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] ==> Unified kernel image generation successful
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -U /boot/EFI/Linux/arch-linux-fallback.efi -g /boot/initramfs-linux-fallback.img -S autodetect
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] ==> Starting build: '7.1.9-arch1-2'
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2026-08-23T13:59:26+0200] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
[2026-08-23T13:59:27+0200] [ALPM-SCRIPTLET] -> Running build hook: [microcode]
[2026-08-23T13:59:27+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2026-08-23T13:59:27+0200] [ALPM-SCRIPTLET] -> Running build hook: [kms]
[2026-08-23T13:59:31+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'ast'
[2026-08-23T13:59:34+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2026-08-23T13:59:34+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
[2026-08-23T13:59:35+0200] [ALPM-SCRIPTLET] -> Running build hook: [sd-vconsole]
[2026-08-23T13:59:35+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2026-08-23T13:59:36+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2026-08-23T13:59:36+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2026-08-23T13:59:36+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2026-08-23T13:59:36+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2026-08-23T13:59:36+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2026-08-23T13:59:37+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2026-08-23T13:59:39+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2026-08-23T13:59:40+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2026-08-23T13:59:41+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-08-23T13:59:42+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2026-08-23T13:59:43+0200] [ALPM-SCRIPTLET] -> Early uncompressed CPIO image generation successful
[2026-08-23T13:59:43+0200] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-08-23T13:59:43+0200] [ALPM-SCRIPTLET] ==> Creating unified kernel image: '/boot/EFI/Linux/arch-linux-fallback.efi'
[2026-08-23T13:59:43+0200] [ALPM-SCRIPTLET] ==> Unified kernel image generation successful
[2026-08-23T13:59:43+0200] [ALPM] running 'dbus-reload.hook'...
[2026-08-23T13:59:43+0200] [ALPM] running 'fontconfig.hook'...
[2026-08-23T13:59:43+0200] [ALPM] running 'fontconfig-32.hook'...
[2026-08-23T13:59:44+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-23T13:59:44+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-23T13:59:44+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-23T13:59:44+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-23T13:59:44+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-23T13:59:44+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-23T13:59:44+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-23T13:59:44+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-23T13:59:44+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-23T13:59:46+0200] [ALPM-SCRIPTLET] foreign cockatrice-client-git
[2026-08-23T13:59:46+0200] [ALPM-SCRIPTLET] foreign cockatrice-server-git
[2026-08-23T13:59:46+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-23T14:00:23+0200] [PACMAN] Running '/usr/bin/pacman -U /home/Elizabeth/build/packages/proton-ge-custom-bin-1:GE_Proton11_5-1-x86_64.pkg.tar.zst'
[2026-08-23T14:00:25+0200] [ALPM] transaction started
[2026-08-23T14:00:26+0200] [ALPM] reinstalled proton-ge-custom-bin (1:GE_Proton11_5-1)
[2026-08-23T14:00:26+0200] [ALPM-SCRIPTLET]
[2026-08-23T14:00:26+0200] [ALPM-SCRIPTLET] The wine executable used by proton can automatically set the niceness of a process;
[2026-08-23T14:00:26+0200] [ALPM-SCRIPTLET] Consider adding yourself to the games group to make this work by issuing: usermod -a -G games
[2026-08-23T14:00:26+0200] [ALPM-SCRIPTLET]
[2026-08-23T14:00:27+0200] [ALPM] transaction completed
[2026-08-23T14:00:27+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-23T14:00:27+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-23T14:00:27+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-23T14:00:27+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-23T14:00:27+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-23T14:00:27+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-23T14:00:27+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-23T14:00:27+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-23T14:00:27+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-23T14:00:29+0200] [ALPM-SCRIPTLET] foreign proton-ge-custom-bin
[2026-08-24T13:52:29+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-24T13:52:29+0200] [PACMAN] synchronizing package lists
[2026-08-24T13:52:34+0200] [PACMAN] starting full system upgrade
[2026-08-24T13:52:39+0200] [ALPM] transaction started
[2026-08-24T13:52:39+0200] [ALPM] upgraded fontconfig (2:2.18.3-1 -> 2:2.18.3-2)
[2026-08-24T13:52:39+0200] [ALPM-SCRIPTLET] Rebuilding fontconfig cache...
[2026-08-24T13:52:42+0200] [ALPM] upgraded gstreamer (1.28.6-1 -> 1.28.6-2)
[2026-08-24T13:52:42+0200] [ALPM] upgraded gst-plugins-base-libs (1.28.6-1 -> 1.28.6-2)
[2026-08-24T13:52:43+0200] [ALPM] upgraded gst-plugins-bad-libs (1.28.6-1 -> 1.28.6-2)
[2026-08-24T13:52:43+0200] [ALPM] upgraded gst-plugins-base (1.28.6-1 -> 1.28.6-2)
[2026-08-24T13:52:43+0200] [ALPM] upgraded gst-plugins-good (1.28.6-1 -> 1.28.6-2)
[2026-08-24T13:52:43+0200] [ALPM] upgraded imagemagick (7.1.2.29-2 -> 7.1.2.30-1)
[2026-08-24T13:52:43+0200] [ALPM] upgraded kio (6.29.0-1 -> 6.29.0-2)
[2026-08-24T13:52:43+0200] [ALPM] upgraded libblake3 (1.8.4-1 -> 1.8.7-1)
[2026-08-24T13:52:43+0200] [ALPM] upgraded libmysofa (1.3.4-1 -> 1.3.5-1)
[2026-08-24T13:52:43+0200] [ALPM] upgraded mailcap (2.1.54-2 -> 2.1.54-3)
[2026-08-24T13:52:43+0200] [ALPM] upgraded neovim (0.12.4-1 -> 0.12.5-1)
[2026-08-24T13:52:43+0200] [ALPM] upgraded python-idna (3.18-1 -> 3.19-1)
[2026-08-24T13:52:43+0200] [ALPM] upgraded simdjson (1:4.6.7-1 -> 1:4.6.8-1)
[2026-08-24T13:52:43+0200] [ALPM] upgraded uwsm (0.26.6-1 -> 0.26.7-1)
[2026-08-24T13:52:43+0200] [ALPM] transaction completed
[2026-08-24T13:52:43+0200] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2026-08-24T13:52:43+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-24T13:52:44+0200] [ALPM] running 'detect-old-perl-modules.hook'...
[2026-08-24T13:52:44+0200] [ALPM] running 'fontconfig.hook'...
[2026-08-24T13:52:44+0200] [ALPM] running 'fontconfig-32.hook'...
[2026-08-24T13:52:44+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-24T13:52:44+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-24T13:52:44+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-24T13:52:44+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-24T13:52:44+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-24T13:52:44+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-24T13:52:44+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-24T13:52:44+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-24T13:52:44+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-24T13:52:45+0200] [ALPM-SCRIPTLET] foreign zen-browser-bin
[2026-08-24T13:52:45+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-25T09:51:15+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-25T09:51:15+0200] [PACMAN] synchronizing package lists
[2026-08-25T09:51:16+0200] [PACMAN] starting full system upgrade
[2026-08-25T09:51:19+0200] [ALPM] transaction started
[2026-08-25T09:51:19+0200] [ALPM] upgraded discord (1:1.0.154-1 -> 1:1.0.155-1)
[2026-08-25T09:51:19+0200] [ALPM] upgraded frei0r-plugins (3.4.3-1 -> 3.5.0-1)
[2026-08-25T09:51:19+0200] [ALPM] upgraded libdbusmenu-glib (18.10.20180917-1 -> 18.10.20180917-2)
[2026-08-25T09:51:19+0200] [ALPM] upgraded libdbusmenu-gtk3 (18.10.20180917-1 -> 18.10.20180917-2)
[2026-08-25T09:51:20+0200] [ALPM] upgraded vim-runtime (9.2.0849-1 -> 9.2.1001-1)
[2026-08-25T09:51:20+0200] [ALPM] upgraded vim (9.2.0849-1 -> 9.2.1001-1)
[2026-08-25T09:51:20+0200] [ALPM] transaction completed
[2026-08-25T09:51:20+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-25T09:51:20+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-25T09:51:20+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-25T09:51:20+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-25T09:51:20+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-25T09:51:20+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-25T09:51:20+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-25T09:51:20+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-25T09:51:20+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-25T09:51:20+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-25T09:51:21+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-26T09:51:55+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-26T09:51:55+0200] [PACMAN] synchronizing package lists
[2026-08-26T09:51:58+0200] [PACMAN] starting full system upgrade
[2026-08-26T09:52:05+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-26T09:52:05+0200] [PACMAN] synchronizing package lists
[2026-08-26T09:52:07+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-26T09:52:07+0200] [PACMAN] synchronizing package lists
[2026-08-26T09:52:08+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-26T09:52:08+0200] [PACMAN] synchronizing package lists
[2026-08-26T09:52:09+0200] [PACMAN] starting full system upgrade
[2026-08-26T09:52:43+0200] [ALPM] transaction started
[2026-08-26T09:52:43+0200] [ALPM] warning: directory permissions differ on /etc/ssl/private/, filesystem: 755 package: 700
[2026-08-26T09:52:43+0200] [ALPM] upgraded openssl (3.6.3-1 -> 3.6.4-1)
[2026-08-26T09:52:44+0200] [ALPM] upgraded firefox (154.0-1 -> 154.0.1-1)
[2026-08-26T09:52:44+0200] [ALPM] upgraded lib32-openssl (1:3.6.3-1 -> 1:3.6.4-1)
[2026-08-26T09:52:44+0200] [ALPM] upgraded lua54 (5.4.8-6 -> 5.4.9-1)
[2026-08-26T09:52:44+0200] [ALPM] upgraded mpd-mpris (0.4.3-1 -> 0.4.4-1)
[2026-08-26T09:52:44+0200] [ALPM] upgraded vim-runtime (9.2.1001-1 -> 9.2.1011-1)
[2026-08-26T09:52:44+0200] [ALPM] upgraded vim (9.2.1001-1 -> 9.2.1011-1)
[2026-08-26T09:52:44+0200] [ALPM] transaction completed
[2026-08-26T09:52:44+0200] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2026-08-26T09:52:45+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-26T09:52:45+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-26T09:52:45+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-26T09:52:45+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-26T09:52:45+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-26T09:52:45+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-26T09:52:45+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-26T09:52:45+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-26T09:52:45+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-26T09:52:45+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-26T09:52:46+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-27T13:10:25+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-27T13:10:25+0200] [PACMAN] synchronizing package lists
[2026-08-27T13:10:26+0200] [PACMAN] starting full system upgrade
[2026-08-27T13:10:32+0200] [ALPM] transaction started
[2026-08-27T13:10:32+0200] [ALPM] upgraded libcap-ng (0.9.3-1 -> 0.9.5-1)
[2026-08-27T13:10:32+0200] [ALPM] upgraded bubblewrap (0.11.2-1 -> 0.12.0-1)
[2026-08-27T13:10:32+0200] [ALPM] upgraded libbluray (1.4.1-1 -> 1.5.0-1)
[2026-08-27T13:10:32+0200] [ALPM] upgraded srt (1.5.6-1 -> 1.5.7-1)
[2026-08-27T13:10:32+0200] [ALPM] upgraded ffmpeg (2:9.0.1-1 -> 2:9.0.1-4)
[2026-08-27T13:10:32+0200] [ALPM] upgraded ffmpeg4.4 (4.4.8-3 -> 4.4.8-5)
[2026-08-27T13:10:32+0200] [ALPM] upgraded gvfs (1.60.2-1 -> 1.60.2-3)
[2026-08-27T13:10:32+0200] [ALPM] upgraded libheif (1.23.1-4 -> 1.23.2-1)
[2026-08-27T13:10:32+0200] [ALPM] upgraded libuv (1.52.1-1 -> 1.52.1-2)
[2026-08-27T13:10:32+0200] [ALPM] upgraded mpv (1:0.41.0-4 -> 1:0.41.0-5)
[2026-08-27T13:10:32+0200] [ALPM] upgraded nodejs (26.7.0-1 -> 26.8.1-1)
[2026-08-27T13:10:32+0200] [ALPM] upgraded node-gyp (13.0.1-1 -> 13.0.2-1)
[2026-08-27T13:10:32+0200] [ALPM] upgraded python-capng (0.9.3-1 -> 0.9.5-1)
[2026-08-27T13:10:32+0200] [ALPM] upgraded python-platformdirs (4.11.3-1 -> 4.11.4-1)
[2026-08-27T13:10:33+0200] [ALPM] transaction completed
[2026-08-27T13:10:33+0200] [ALPM] running '21-systemd-tmpfiles.hook'...
[2026-08-27T13:10:33+0200] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2026-08-27T13:10:33+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-27T13:10:33+0200] [ALPM] running 'gio-querymodules.hook'...
[2026-08-27T13:10:33+0200] [ALPM] running 'glib-compile-schemas.hook'...
[2026-08-27T13:10:33+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-27T13:10:33+0200] [ALPM] running 'gvfsd.hook'...
[2026-08-27T13:10:33+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-27T13:10:33+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-27T13:10:33+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-27T13:10:33+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-27T13:10:33+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-27T13:10:33+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-27T13:10:33+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-27T13:10:33+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-27T13:10:34+0200] [ALPM-SCRIPTLET] foreign zen-browser-bin
[2026-08-27T13:10:34+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-28T12:07:55+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-28T12:07:55+0200] [PACMAN] synchronizing package lists
[2026-08-28T12:07:56+0200] [PACMAN] starting full system upgrade
[2026-08-28T12:08:43+0200] [ALPM] running '60-mkinitcpio-remove.hook'...
[2026-08-28T12:08:43+0200] [ALPM] running '71-dkms-remove.hook'...
[2026-08-28T12:08:44+0200] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod v4l2loopback/0.15.4 -k 7.1.9-arch1-2
[2026-08-28T12:08:44+0200] [ALPM-SCRIPTLET] ==> depmod 7.1.9-arch1-2
[2026-08-28T12:08:47+0200] [ALPM] transaction started
[2026-08-28T12:08:47+0200] [ALPM] upgraded aom (3.14.1-1 -> 3.15.0-1)
[2026-08-28T12:08:47+0200] [ALPM] upgraded ca-certificates-mozilla (3.127-1 -> 3.128-1)
[2026-08-28T12:08:47+0200] [ALPM] upgraded harfbuzz (14.3.1-1 -> 14.4.0-1)
[2026-08-28T12:08:47+0200] [ALPM] upgraded nss (3.127-1 -> 3.128-1)
[2026-08-28T12:08:48+0200] [ALPM] upgraded calibre (9.13.0-3 -> 9.14.0-1)
[2026-08-28T12:08:48+0200] [ALPM] upgraded deno (2.9.5-1 -> 2.9.6-1)
[2026-08-28T12:08:48+0200] [ALPM] upgraded gnome-autoar (0.4.5-1 -> 0.5.1-1)
[2026-08-28T12:08:48+0200] [ALPM] upgraded harfbuzz-icu (14.3.1-1 -> 14.4.0-1)
[2026-08-28T12:08:48+0200] [ALPM] upgraded lib32-harfbuzz (14.3.1-1 -> 14.4.0-1)
[2026-08-28T12:08:48+0200] [ALPM] upgraded lib32-nss (3.127-1 -> 3.128-1)
[2026-08-28T12:08:48+0200] [ALPM] upgraded linux (7.1.9.arch1-2 -> 7.1.10.arch1-1)
[2026-08-28T12:08:50+0200] [ALPM] upgraded linux-headers (7.1.9.arch1-2 -> 7.1.10.arch1-1)
[2026-08-28T12:08:50+0200] [ALPM] upgraded man-pages (6.18-1 -> 6.19-1)
[2026-08-28T12:08:50+0200] [ALPM] upgraded mariadb-libs (12.3.2-4 -> 12.3.3-2)
[2026-08-28T12:08:50+0200] [ALPM] upgraded mariadb-clients (12.3.2-4 -> 12.3.3-2)
[2026-08-28T12:08:50+0200] [ALPM] upgraded mariadb (12.3.2-4 -> 12.3.3-2)
[2026-08-28T12:08:51+0200] [ALPM] upgraded mpd (0.24.14-1 -> 0.24.15-1)
[2026-08-28T12:08:51+0200] [ALPM] upgraded pkgconf (3.0.5-1 -> 3.0.6-1)
[2026-08-28T12:08:51+0200] [ALPM] transaction completed
[2026-08-28T12:08:52+0200] [ALPM] running '20-systemd-sysusers.hook'...
[2026-08-28T12:08:52+0200] [ALPM] running '21-systemd-tmpfiles.hook'...
[2026-08-28T12:08:52+0200] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2026-08-28T12:08:52+0200] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2026-08-28T12:08:52+0200] [ALPM] running '30-update-mime-database.hook'...
[2026-08-28T12:08:52+0200] [ALPM] running '35-systemd-enqueue-marked.hook'...
[2026-08-28T12:08:52+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-28T12:08:53+0200] [ALPM] running '40-update-ca-trust.hook'...
[2026-08-28T12:08:53+0200] [ALPM] running '60-depmod.hook'...
[2026-08-28T12:08:54+0200] [ALPM] running '70-dkms-install.hook'...
[2026-08-28T12:08:54+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod v4l2loopback/0.15.4 -k 7.1.10-arch1-1
[2026-08-28T12:08:57+0200] [ALPM-SCRIPTLET] ==> depmod 7.1.10-arch1-1
[2026-08-28T12:09:00+0200] [ALPM] running '90-mkinitcpio-install.hook'...
[2026-08-28T12:09:00+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2026-08-28T12:09:00+0200] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-08-28T12:09:00+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -U /boot/EFI/Linux/arch-linux.efi -g /boot/initramfs-linux.img
[2026-08-28T12:09:00+0200] [ALPM-SCRIPTLET] ==> Starting build: '7.1.10-arch1-1'
[2026-08-28T12:09:00+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2026-08-28T12:09:01+0200] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
[2026-08-28T12:09:02+0200] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2026-08-28T12:09:02+0200] [ALPM-SCRIPTLET] -> Running build hook: [microcode]
[2026-08-28T12:09:02+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2026-08-28T12:09:02+0200] [ALPM-SCRIPTLET] -> Running build hook: [kms]
[2026-08-28T12:09:05+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2026-08-28T12:09:05+0200] [ALPM-SCRIPTLET] -> Running build hook: [sd-vconsole]
[2026-08-28T12:09:05+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2026-08-28T12:09:06+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2026-08-28T12:09:06+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2026-08-28T12:09:06+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-08-28T12:09:06+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2026-08-28T12:09:06+0200] [ALPM-SCRIPTLET] -> Early uncompressed CPIO image generation successful
[2026-08-28T12:09:06+0200] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-08-28T12:09:06+0200] [ALPM-SCRIPTLET] ==> Creating unified kernel image: '/boot/EFI/Linux/arch-linux.efi'
[2026-08-28T12:09:07+0200] [ALPM-SCRIPTLET] ==> Unified kernel image generation successful
[2026-08-28T12:09:07+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2026-08-28T12:09:07+0200] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-08-28T12:09:07+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -U /boot/EFI/Linux/arch-linux-fallback.efi -g /boot/initramfs-linux-fallback.img -S autodetect
[2026-08-28T12:09:07+0200] [ALPM-SCRIPTLET] ==> Starting build: '7.1.10-arch1-1'
[2026-08-28T12:09:07+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2026-08-28T12:09:07+0200] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
[2026-08-28T12:09:08+0200] [ALPM-SCRIPTLET] -> Running build hook: [microcode]
[2026-08-28T12:09:08+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2026-08-28T12:09:08+0200] [ALPM-SCRIPTLET] -> Running build hook: [kms]
[2026-08-28T12:09:11+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'ast'
[2026-08-28T12:09:15+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2026-08-28T12:09:15+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
[2026-08-28T12:09:16+0200] [ALPM-SCRIPTLET] -> Running build hook: [sd-vconsole]
[2026-08-28T12:09:16+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2026-08-28T12:09:17+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2026-08-28T12:09:17+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2026-08-28T12:09:17+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2026-08-28T12:09:17+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2026-08-28T12:09:17+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2026-08-28T12:09:17+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2026-08-28T12:09:20+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2026-08-28T12:09:20+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2026-08-28T12:09:22+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-08-28T12:09:22+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2026-08-28T12:09:23+0200] [ALPM-SCRIPTLET] -> Early uncompressed CPIO image generation successful
[2026-08-28T12:09:24+0200] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-08-28T12:09:24+0200] [ALPM-SCRIPTLET] ==> Creating unified kernel image: '/boot/EFI/Linux/arch-linux-fallback.efi'
[2026-08-28T12:09:24+0200] [ALPM-SCRIPTLET] ==> Unified kernel image generation successful
[2026-08-28T12:09:24+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-28T12:09:24+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-28T12:09:24+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-28T12:09:24+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-28T12:09:24+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-28T12:09:24+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-28T12:09:24+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-28T12:09:24+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-28T12:09:24+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-28T12:09:25+0200] [ALPM-SCRIPTLET] foreign zen-browser-bin
[2026-08-28T12:09:25+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-28T20:58:11+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-28T20:58:11+0200] [PACMAN] synchronizing package lists
[2026-08-28T20:58:14+0200] [PACMAN] starting full system upgrade
[2026-08-28T20:59:10+0200] [ALPM] transaction started
[2026-08-28T20:59:10+0200] [ALPM] upgraded faad2 (2.11.2-1 -> 2.11.3-1)
[2026-08-28T20:59:10+0200] [ALPM] upgraded libgcrypt (1.12.2-1 -> 1.12.3-1)
[2026-08-28T20:59:10+0200] [ALPM] upgraded lib32-libgcrypt (1.12.2-1 -> 1.12.3-1)
[2026-08-28T20:59:10+0200] [ALPM] upgraded libcloudproviders (0.4.0-1 -> 0.4.1-1)
[2026-08-28T20:59:10+0200] [ALPM] upgraded libetonyek (0.1.13-2 -> 0.1.13-3)
[2026-08-28T20:59:10+0200] [ALPM] upgraded libixion (0.20.0-8 -> 0.20.0-9)
[2026-08-28T20:59:10+0200] [ALPM] upgraded libksba (1.8.0-1 -> 1.8.1-1)
[2026-08-28T20:59:10+0200] [ALPM] upgraded libopenmpt (0.8.8-1 -> 0.8.9-1)
[2026-08-28T20:59:10+0200] [ALPM] upgraded liborcus (0.21.0-7 -> 0.21.0-8)
[2026-08-28T20:59:11+0200] [ALPM] upgraded libreoffice-still (25.8.7-7 -> 26.2.5-2)
[2026-08-28T20:59:11+0200] [ALPM] upgraded libreoffice-still-hr (25.8.7-1 -> 26.2.5-1)
[2026-08-28T20:59:11+0200] [ALPM] upgraded protobuf (35.1-2 -> 36.0-1)
[2026-08-28T20:59:11+0200] [ALPM] upgraded qt6-base (6.11.2-2 -> 6.11.2-3)
[2026-08-28T20:59:11+0200] [ALPM] upgraded qca-qt6 (2.3.10-8 -> 2.3.12-1)
[2026-08-28T20:59:11+0200] [ALPM] upgraded qpwgraph (1.0.3-1 -> 1.0.4-1)
[2026-08-28T20:59:11+0200] [ALPM] upgraded strawberry (1.2.27-1 -> 1.2.28-1)
[2026-08-28T20:59:11+0200] [ALPM] upgraded usbguard (1.1.4-9 -> 1.1.4-10)
[2026-08-28T20:59:12+0200] [ALPM] transaction completed
[2026-08-28T20:59:12+0200] [ALPM] running '21-systemd-tmpfiles.hook'...
[2026-08-28T20:59:12+0200] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2026-08-28T20:59:12+0200] [ALPM] running '30-update-mime-database.hook'...
[2026-08-28T20:59:12+0200] [ALPM] running '35-systemd-enqueue-marked.hook'...
[2026-08-28T20:59:12+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-28T20:59:13+0200] [ALPM] running 'dbus-reload.hook'...
[2026-08-28T20:59:13+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-28T20:59:13+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-28T20:59:13+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-28T20:59:13+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-28T20:59:13+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-28T20:59:13+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-28T20:59:13+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-28T20:59:13+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-28T20:59:13+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-28T20:59:14+0200] [ALPM-SCRIPTLET] foreign cockatrice-client-git
[2026-08-28T20:59:14+0200] [ALPM-SCRIPTLET] foreign cockatrice-server-git
[2026-08-28T20:59:14+0200] [ALPM] running 'texinfo-install.hook'...
[2026-08-28T20:59:14+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-29T13:19:40+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-29T13:19:40+0200] [PACMAN] synchronizing package lists
[2026-08-29T13:19:42+0200] [PACMAN] starting full system upgrade
[2026-08-29T13:20:32+0200] [ALPM] running '60-mkinitcpio-remove.hook'...
[2026-08-29T13:20:33+0200] [ALPM] running '71-dkms-remove.hook'...
[2026-08-29T13:20:33+0200] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod v4l2loopback/0.15.4 -k 7.1.10-arch1-1
[2026-08-29T13:20:34+0200] [ALPM-SCRIPTLET] ==> depmod 7.1.10-arch1-1
[2026-08-29T13:20:37+0200] [ALPM] transaction started
[2026-08-29T13:20:37+0200] [ALPM] installed cfitsio (1:4.7.0-1)
[2026-08-29T13:20:37+0200] [ALPM] installed libcgif (0.5.3-1)
[2026-08-29T13:20:37+0200] [ALPM] installed libvips (8.18.5-1)
[2026-08-29T13:20:37+0200] [ALPM] upgraded appstream (1.1.6-1 -> 1.2.0-1)
[2026-08-29T13:20:37+0200] [ALPM] upgraded breeze-cursors (6.7.4-1 -> 6.7.4-2)
[2026-08-29T13:20:37+0200] [ALPM] upgraded breeze (6.7.4-1 -> 6.7.4-2)
[2026-08-29T13:20:37+0200] [ALPM] upgraded cmake (4.4.2-1 -> 4.4.3-1)
[2026-08-29T13:20:38+0200] [ALPM] upgraded linux (7.1.10.arch1-1 -> 7.1.11.arch1-1)
[2026-08-29T13:20:40+0200] [ALPM] upgraded linux-headers (7.1.10.arch1-1 -> 7.1.11.arch1-1)
[2026-08-29T13:20:40+0200] [ALPM] upgraded orc (0.4.42-1 -> 0.4.43-1)
[2026-08-29T13:20:40+0200] [ALPM] upgraded python-platformdirs (4.11.4-1 -> 4.11.5-1)
[2026-08-29T13:20:40+0200] [ALPM] transaction completed
[2026-08-29T13:20:41+0200] [ALPM] running '30-update-mime-database.hook'...
[2026-08-29T13:20:41+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-29T13:20:41+0200] [ALPM] running '60-depmod.hook'...
[2026-08-29T13:20:42+0200] [ALPM] running '70-dkms-install.hook'...
[2026-08-29T13:20:42+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod v4l2loopback/0.15.4 -k 7.1.11-arch1-1
[2026-08-29T13:20:45+0200] [ALPM-SCRIPTLET] ==> depmod 7.1.11-arch1-1
[2026-08-29T13:20:48+0200] [ALPM] running '90-mkinitcpio-install.hook'...
[2026-08-29T13:20:48+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2026-08-29T13:20:48+0200] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-08-29T13:20:48+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -U /boot/EFI/Linux/arch-linux.efi -g /boot/initramfs-linux.img
[2026-08-29T13:20:48+0200] [ALPM-SCRIPTLET] ==> Starting build: '7.1.11-arch1-1'
[2026-08-29T13:20:48+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2026-08-29T13:20:49+0200] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
[2026-08-29T13:20:50+0200] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2026-08-29T13:20:50+0200] [ALPM-SCRIPTLET] -> Running build hook: [microcode]
[2026-08-29T13:20:50+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2026-08-29T13:20:50+0200] [ALPM-SCRIPTLET] -> Running build hook: [kms]
[2026-08-29T13:20:52+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2026-08-29T13:20:53+0200] [ALPM-SCRIPTLET] -> Running build hook: [sd-vconsole]
[2026-08-29T13:20:53+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2026-08-29T13:20:53+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2026-08-29T13:20:53+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] -> Early uncompressed CPIO image generation successful
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] ==> Creating unified kernel image: '/boot/EFI/Linux/arch-linux.efi'
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] ==> Unified kernel image generation successful
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -U /boot/EFI/Linux/arch-linux-fallback.efi -g /boot/initramfs-linux-fallback.img -S autodetect
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] ==> Starting build: '7.1.11-arch1-1'
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2026-08-29T13:20:54+0200] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
[2026-08-29T13:20:55+0200] [ALPM-SCRIPTLET] -> Running build hook: [microcode]
[2026-08-29T13:20:55+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2026-08-29T13:20:55+0200] [ALPM-SCRIPTLET] -> Running build hook: [kms]
[2026-08-29T13:20:58+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'ast'
[2026-08-29T13:21:01+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2026-08-29T13:21:02+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
[2026-08-29T13:21:02+0200] [ALPM-SCRIPTLET] -> Running build hook: [sd-vconsole]
[2026-08-29T13:21:02+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2026-08-29T13:21:03+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2026-08-29T13:21:03+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2026-08-29T13:21:03+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2026-08-29T13:21:03+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2026-08-29T13:21:03+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2026-08-29T13:21:03+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2026-08-29T13:21:06+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2026-08-29T13:21:06+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2026-08-29T13:21:08+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-08-29T13:21:08+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2026-08-29T13:21:09+0200] [ALPM-SCRIPTLET] -> Early uncompressed CPIO image generation successful
[2026-08-29T13:21:09+0200] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-08-29T13:21:09+0200] [ALPM-SCRIPTLET] ==> Creating unified kernel image: '/boot/EFI/Linux/arch-linux-fallback.efi'
[2026-08-29T13:21:09+0200] [ALPM-SCRIPTLET] ==> Unified kernel image generation successful
[2026-08-29T13:21:10+0200] [ALPM] running '90-update-appstream-cache.hook'...
[2026-08-29T13:21:10+0200] [ALPM-SCRIPTLET] ✔ Metadata cache was updated successfully.
[2026-08-29T13:21:10+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-29T13:21:10+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-29T13:21:10+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-29T13:21:10+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-29T13:21:10+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-29T13:21:10+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-29T13:21:10+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-29T13:21:10+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-29T13:21:10+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-29T13:21:11+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-29T13:24:11+0200] [PACMAN] Running '/usr/bin/pacman -U /home/Elizabeth/build/packages/proton-ge-custom-bin-1:GE_Proton11_6-1-x86_64.pkg.tar.zst'
[2026-08-29T13:24:12+0200] [ALPM] transaction started
[2026-08-29T13:24:14+0200] [ALPM] upgraded proton-ge-custom-bin (1:GE_Proton11_5-1 -> 1:GE_Proton11_6-1)
[2026-08-29T13:24:14+0200] [ALPM-SCRIPTLET]
[2026-08-29T13:24:14+0200] [ALPM-SCRIPTLET] The wine executable used by proton can automatically set the niceness of a process;
[2026-08-29T13:24:14+0200] [ALPM-SCRIPTLET] Consider adding yourself to the games group to make this work by issuing: usermod -a -G games
[2026-08-29T13:24:14+0200] [ALPM-SCRIPTLET]
[2026-08-29T13:24:15+0200] [ALPM] transaction completed
[2026-08-29T13:24:16+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-29T13:24:16+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] lib32-gst-plugins-base-libs 1.28.1-3
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] lib32-libtheora 1.2.0-1
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] lib32-libusb 1.0.30-1
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] lib32-libvdpau 1.5-3
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] lib32-mpg123 1.33.7-1
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] lib32-openal 1.25.2-1
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] lib32-speex 1.2.1-2
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] lib32-vkd3d 1.19-1
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] libsoup 2.74.3-4
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-29T13:24:16+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-29T13:24:16+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-29T13:24:18+0200] [ALPM-SCRIPTLET] foreign proton-ge-custom-bin
[2026-08-30T12:21:19+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-30T12:21:19+0200] [PACMAN] synchronizing package lists
[2026-08-30T12:21:21+0200] [PACMAN] starting full system upgrade
[2026-08-30T12:21:40+0200] [ALPM] transaction started
[2026-08-30T12:21:40+0200] [ALPM] upgraded enchant (2.8.15-2 -> 2.8.16-1)
[2026-08-30T12:21:40+0200] [ALPM] upgraded gstreamer (1.28.6-2 -> 1.28.6-3)
[2026-08-30T12:21:40+0200] [ALPM] upgraded gst-plugins-base-libs (1.28.6-2 -> 1.28.6-3)
[2026-08-30T12:21:40+0200] [ALPM] upgraded gst-plugins-bad-libs (1.28.6-2 -> 1.28.6-3)
[2026-08-30T12:21:40+0200] [ALPM] upgraded gst-plugins-base (1.28.6-2 -> 1.28.6-3)
[2026-08-30T12:21:40+0200] [ALPM] upgraded libvpx (1.16.0-3 -> 1.17.0-1)
[2026-08-30T12:21:40+0200] [ALPM] upgraded gst-plugins-good (1.28.6-2 -> 1.28.6-3)
[2026-08-30T12:21:40+0200] [ALPM] upgraded libcdio (2.3.0-1 -> 2.4.0-1)
[2026-08-30T12:21:40+0200] [ALPM] upgraded libcdio-paranoia (10.2+2.0.2-2 -> 10.2+2.0.2-3)
[2026-08-30T12:21:40+0200] [ALPM] upgraded gvfs (1.60.2-3 -> 1.60.2-4)
[2026-08-30T12:21:40+0200] [ALPM] upgraded mpd (0.24.15-1 -> 0.24.15-2)
[2026-08-30T12:21:40+0200] [ALPM] upgraded mpv (1:0.41.0-5 -> 1:0.41.0-6)
[2026-08-30T12:21:40+0200] [ALPM] upgraded nwg-displays (0.4.3-1 -> 0.4.4-1)
[2026-08-30T12:21:40+0200] [ALPM] upgraded python-wrapt (2.3.0-1 -> 2.4.0-1)
[2026-08-30T12:21:40+0200] [ALPM] upgraded strawberry (1.2.28-1 -> 1.2.28-2)
[2026-08-30T12:21:40+0200] [ALPM] transaction completed
[2026-08-30T12:21:40+0200] [ALPM] running '20-systemd-sysusers.hook'...
[2026-08-30T12:21:40+0200] [ALPM] running '21-systemd-tmpfiles.hook'...
[2026-08-30T12:21:40+0200] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2026-08-30T12:21:41+0200] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2026-08-30T12:21:41+0200] [ALPM] running '35-systemd-enqueue-marked.hook'...
[2026-08-30T12:21:41+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-30T12:21:41+0200] [ALPM] running 'gio-querymodules.hook'...
[2026-08-30T12:21:41+0200] [ALPM] running 'glib-compile-schemas.hook'...
[2026-08-30T12:21:41+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-30T12:21:41+0200] [ALPM] running 'gvfsd.hook'...
[2026-08-30T12:21:41+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] lib32-gst-plugins-base-libs 1.28.1-3
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] lib32-libtheora 1.2.0-1
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] lib32-libusb 1.0.30-1
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] lib32-libvdpau 1.5-3
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] lib32-mpg123 1.33.7-1
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] lib32-openal 1.25.2-1
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] lib32-speex 1.2.1-2
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] lib32-vkd3d 1.19-1
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] libsoup 2.74.3-4
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-30T12:21:41+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-30T12:21:41+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-30T12:21:43+0200] [ALPM] running 'texinfo-install.hook'...
[2026-08-30T12:21:43+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-30T12:23:20+0200] [PACMAN] Running '/usr/bin/pacman -U /home/Elizabeth/build/packages/zen-browser-bin-1.21.16b-1-x86_64.pkg.tar.zst'
[2026-08-30T12:23:22+0200] [ALPM] transaction started
[2026-08-30T12:23:22+0200] [ALPM] upgraded zen-browser-bin (1.21.15b-1 -> 1.21.16b-1)
[2026-08-30T12:23:22+0200] [ALPM] transaction completed
[2026-08-30T12:23:22+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-30T12:23:22+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-30T12:23:22+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] lib32-gst-plugins-base-libs 1.28.1-3
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] lib32-libtheora 1.2.0-1
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] lib32-libusb 1.0.30-1
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] lib32-libvdpau 1.5-3
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] lib32-mpg123 1.33.7-1
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] lib32-openal 1.25.2-1
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] lib32-speex 1.2.1-2
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] lib32-vkd3d 1.19-1
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] libsoup 2.74.3-4
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-30T12:23:22+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-30T12:23:22+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-30T12:23:23+0200] [ALPM-SCRIPTLET] foreign zen-browser-bin
[2026-08-30T12:23:23+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-31T11:40:32+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-31T11:40:32+0200] [PACMAN] synchronizing package lists
[2026-08-31T11:40:33+0200] [PACMAN] starting full system upgrade
[2026-08-31T11:40:54+0200] [ALPM] transaction started
[2026-08-31T11:40:55+0200] [ALPM] upgraded exiv2 (0.28.8-2 -> 0.28.9-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded fd (10.4.2-2 -> 10.5.0-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded imlib2 (1.12.6-2 -> 1.12.7-3)
[2026-08-31T11:40:55+0200] [ALPM] upgraded libnautilus-extension (50.2.2-1 -> 50.3-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded libresidfp (1.2.1-1 -> 1.2.2-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded libsidplayfp (3.1.0-1 -> 3.1.1-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded nautilus (50.2.2-1 -> 50.3-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded python-charset-normalizer (3.4.7-1 -> 3.5.1-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded python-pytest (1:9.0.3-1 -> 1:9.1.0-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded python-regex (2026.7.19-1 -> 2026.8.31-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded rofimoji (6.7.0-2 -> 6.8.0-1)
[2026-08-31T11:40:55+0200] [ALPM] upgraded simdjson (1:4.6.8-1 -> 1:4.6.9-1)
[2026-08-31T11:40:56+0200] [ALPM] upgraded wine (11.16-1 -> 11.16-2)
[2026-08-31T11:40:56+0200] [ALPM] transaction completed
[2026-08-31T11:40:56+0200] [ALPM] running '25-systemd-binfmt.hook'...
[2026-08-31T11:40:56+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-31T11:40:56+0200] [ALPM] running 'fontconfig.hook'...
[2026-08-31T11:40:56+0200] [ALPM] running 'fontconfig-32.hook'...
[2026-08-31T11:40:56+0200] [ALPM] running 'glib-compile-schemas.hook'...
[2026-08-31T11:40:56+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-31T11:40:56+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] lib32-gst-plugins-base-libs 1.28.1-3
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] lib32-libtheora 1.2.0-1
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] lib32-libusb 1.0.30-1
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] lib32-libvdpau 1.5-3
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] lib32-mpg123 1.33.7-1
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] lib32-openal 1.25.2-1
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] lib32-speex 1.2.1-2
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] lib32-vkd3d 1.19-1
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] libsoup 2.74.3-4
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-31T11:40:57+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-31T11:40:57+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-31T11:40:58+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-08-31T19:45:42+0200] [PACMAN] Running 'pacman -Syu'
[2026-08-31T19:45:42+0200] [PACMAN] synchronizing package lists
[2026-08-31T19:45:43+0200] [PACMAN] starting full system upgrade
[2026-08-31T19:46:51+0200] [ALPM] running '60-mkinitcpio-remove.hook'...
[2026-08-31T19:46:52+0200] [ALPM] running '71-dkms-remove.hook'...
[2026-08-31T19:46:53+0200] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod v4l2loopback/0.15.4 -k 7.1.11-arch1-1
[2026-08-31T19:46:53+0200] [ALPM-SCRIPTLET] ==> depmod 7.1.11-arch1-1
[2026-08-31T19:46:56+0200] [ALPM] transaction started
[2026-08-31T19:46:56+0200] [ALPM] upgraded libwireplumber (0.5.15-1 -> 0.5.16-1)
[2026-08-31T19:46:56+0200] [ALPM] upgraded wireplumber (0.5.15-1 -> 0.5.16-1)
[2026-08-31T19:46:56+0200] [ALPM] upgraded easyeffects (8.2.8-1 -> 8.2.9-1)
[2026-08-31T19:46:57+0200] [ALPM] upgraded electron43 (43.4.1-1 -> 43.5.0-1)
[2026-08-31T19:46:57+0200] [ALPM] installed libaec (1.1.7-1)
[2026-08-31T19:46:57+0200] [ALPM] installed hdf5 (2.2.0-1)
[2026-08-31T19:46:57+0200] [ALPM] installed libmatio (1.5.30-1)
[2026-08-31T19:46:57+0200] [ALPM] upgraded libvips (8.18.5-1 -> 8.18.6-1)
[2026-08-31T19:46:58+0200] [ALPM] upgraded linux (7.1.11.arch1-1 -> 7.2.2.arch1-1)
[2026-08-31T19:47:00+0200] [ALPM] upgraded linux-headers (7.1.11.arch1-1 -> 7.2.2.arch1-1)
[2026-08-31T19:47:00+0200] [ALPM] upgraded wireplumber-docs (0.5.15-1 -> 0.5.16-1)
[2026-08-31T19:47:00+0200] [ALPM] transaction completed
[2026-08-31T19:47:01+0200] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2026-08-31T19:47:01+0200] [ALPM] running '35-systemd-update.hook'...
[2026-08-31T19:47:01+0200] [ALPM] running '60-depmod.hook'...
[2026-08-31T19:47:02+0200] [ALPM] running '70-dkms-install.hook'...
[2026-08-31T19:47:02+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod v4l2loopback/0.15.4 -k 7.2.2-arch1-1
[2026-08-31T19:47:06+0200] [ALPM-SCRIPTLET] ==> depmod 7.2.2-arch1-1
[2026-08-31T19:47:09+0200] [ALPM] running '90-mkinitcpio-install.hook'...
[2026-08-31T19:47:10+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2026-08-31T19:47:10+0200] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-08-31T19:47:10+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -U /boot/EFI/Linux/arch-linux.efi -g /boot/initramfs-linux.img
[2026-08-31T19:47:10+0200] [ALPM-SCRIPTLET] ==> Starting build: '7.2.2-arch1-1'
[2026-08-31T19:47:10+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2026-08-31T19:47:10+0200] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
[2026-08-31T19:47:12+0200] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2026-08-31T19:47:12+0200] [ALPM-SCRIPTLET] -> Running build hook: [microcode]
[2026-08-31T19:47:12+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2026-08-31T19:47:12+0200] [ALPM-SCRIPTLET] -> Running build hook: [kms]
[2026-08-31T19:47:15+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2026-08-31T19:47:16+0200] [ALPM-SCRIPTLET] -> Running build hook: [sd-vconsole]
[2026-08-31T19:47:16+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] -> Early uncompressed CPIO image generation successful
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] ==> Creating unified kernel image: '/boot/EFI/Linux/arch-linux.efi'
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] ==> Unified kernel image generation successful
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] ==> Using default configuration file: '/etc/mkinitcpio.conf'
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -U /boot/EFI/Linux/arch-linux-fallback.efi -g /boot/initramfs-linux-fallback.img -S autodetect
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] ==> Starting build: '7.2.2-arch1-1'
[2026-08-31T19:47:17+0200] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2026-08-31T19:47:18+0200] [ALPM-SCRIPTLET] -> Running build hook: [systemd]
[2026-08-31T19:47:19+0200] [ALPM-SCRIPTLET] -> Running build hook: [microcode]
[2026-08-31T19:47:19+0200] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2026-08-31T19:47:19+0200] [ALPM-SCRIPTLET] -> Running build hook: [kms]
[2026-08-31T19:47:23+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'ast'
[2026-08-31T19:47:28+0200] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2026-08-31T19:47:29+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'xhci_pci_renesas'
[2026-08-31T19:47:30+0200] [ALPM-SCRIPTLET] -> Running build hook: [sd-vconsole]
[2026-08-31T19:47:30+0200] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2026-08-31T19:47:31+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'aic94xx'
[2026-08-31T19:47:31+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla1280'
[2026-08-31T19:47:31+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qed'
[2026-08-31T19:47:31+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'wd719x'
[2026-08-31T19:47:31+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'qla2xxx'
[2026-08-31T19:47:31+0200] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: 'bfa'
[2026-08-31T19:47:34+0200] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2026-08-31T19:47:34+0200] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2026-08-31T19:47:37+0200] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2026-08-31T19:47:37+0200] [ALPM-SCRIPTLET] ==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
[2026-08-31T19:47:38+0200] [ALPM-SCRIPTLET] -> Early uncompressed CPIO image generation successful
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] ==> Initcpio image generation successful
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] ==> Creating unified kernel image: '/boot/EFI/Linux/arch-linux-fallback.efi'
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] ==> Unified kernel image generation successful
[2026-08-31T19:47:39+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-08-31T19:47:39+0200] [ALPM] running 'notify-orphans.hook'...
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] lib32-gst-plugins-base-libs 1.28.1-3
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] lib32-libtheora 1.2.0-1
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] lib32-libusb 1.0.30-1
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] lib32-libvdpau 1.5-3
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] lib32-mpg123 1.33.7-1
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] lib32-openal 1.25.2-1
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] lib32-speex 1.2.1-2
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] lib32-vkd3d 1.19-1
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] libsoup 2.74.3-4
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-08-31T19:47:39+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-08-31T19:47:39+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-08-31T19:47:40+0200] [ALPM] running 'texinfo-install.hook'...
[2026-08-31T19:47:40+0200] [ALPM] running 'update-desktop-database.hook'...
[2026-09-03T22:48:20+0200] [PACMAN] Running 'pacman -Syu'
[2026-09-03T22:48:20+0200] [PACMAN] synchronizing package lists
[2026-09-03T22:48:24+0200] [PACMAN] starting full system upgrade
[2026-09-03T22:49:14+0200] [ALPM] transaction started
[2026-09-03T22:49:14+0200] [ALPM] upgraded gtest (1.17.0-2 -> 1.18.0-1)
[2026-09-03T22:49:14+0200] [ALPM] upgraded abseil-cpp (20260817.0-1 -> 20260817.0-2)
[2026-09-03T22:49:14+0200] [ALPM] upgraded ada (3.4.4-1 -> 4.0.0-1)
[2026-09-03T22:49:14+0200] [ALPM] upgraded util-linux-libs (2.42.2-1 -> 2.42.3-1)
[2026-09-03T22:49:14+0200] [ALPM] upgraded curl (8.21.0-1 -> 8.22.0-1)
[2026-09-03T22:49:14+0200] [ALPM] upgraded pcre2 (10.47-1 -> 10.48-1)
[2026-09-03T22:49:14+0200] [ALPM] upgraded gpgme (2.1.2-1 -> 2.2.0-1)
[2026-09-03T22:49:14+0200] [ALPM] warning: /etc/pam.d/su installed as /etc/pam.d/su.pacnew
[2026-09-03T22:49:14+0200] [ALPM] warning: /etc/pam.d/su-l installed as /etc/pam.d/su-l.pacnew
[2026-09-03T22:49:14+0200] [ALPM] upgraded util-linux (2.42.2-1 -> 2.42.3-1)
[2026-09-03T22:49:14+0200] [ALPM] upgraded expat (2.8.3-1 -> 2.8.4-1)
[2026-09-03T22:49:14+0200] [ALPM] upgraded archlinux-keyring (20260727-1 -> 20260902-1)
[2026-09-03T22:49:14+0200] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2026-09-03T22:49:16+0200] [ALPM-SCRIPTLET] ==> Updating trust database...
[2026-09-03T22:49:16+0200] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2026-10-21
[2026-09-03T22:49:16+0200] [ALPM] upgraded jsoncpp (1.9.6-3 -> 1.9.8-1)
[2026-09-03T22:49:16+0200] [ALPM] upgraded cmake (4.4.3-1 -> 4.4.3-2)
[2026-09-03T22:49:16+0200] [ALPM] upgraded libunwind (1.8.2-1 -> 1.8.3-1)
[2026-09-03T22:49:16+0200] [ALPM] upgraded mesa (1:26.2.1-1 -> 1:26.2.2-1)
[2026-09-03T22:49:16+0200] [ALPM] upgraded discord (1:1.0.155-1 -> 1:1.0.156-1)
[2026-09-03T22:49:17+0200] [ALPM] upgraded electron43 (43.5.0-1 -> 43.5.1-1)
[2026-09-03T22:49:17+0200] [ALPM] upgraded enchant (2.8.16-1 -> 2.8.18-1)
[2026-09-03T22:49:17+0200] [ALPM] upgraded fd (10.5.0-1 -> 10.5.0-3)
[2026-09-03T22:49:17+0200] [ALPM] upgraded noto-fonts (1:2026.08.01-1 -> 1:2026.09.01-1)
[2026-09-03T22:49:17+0200] [ALPM] upgraded libbluray (1.5.0-1 -> 1.5.1-1)
[2026-09-03T22:49:17+0200] [ALPM] upgraded vapoursynth (77-2 -> 79-1)
[2026-09-03T22:49:17+0200] [ALPM] upgraded vid.stab (1.1.1-3 -> 1.1.2-1)
[2026-09-03T22:49:17+0200] [ALPM] upgraded libwireplumber (0.5.16-1 -> 0.5.17-1)
[2026-09-03T22:49:17+0200] [ALPM] upgraded wireplumber (0.5.16-1 -> 0.5.17-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded firefox (154.0.1-1 -> 155.0-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded gnome-autoar (0.5.1-1 -> 0.5.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded gpgmepp (2.1.0-1 -> 2.2.0-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded lib32-curl (8.21.0-1 -> 8.22.0-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded lib32-expat (2.8.3-1 -> 2.8.4-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded lib32-mesa (1:26.2.1-1 -> 1:26.2.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded lib32-pcre2 (10.47-1 -> 10.48-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded lib32-util-linux (2.42.2-1 -> 2.42.3-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded vulkan-mesa-implicit-layers (1:26.2.1-1 -> 1:26.2.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded lib32-vulkan-mesa-implicit-layers (1:26.2.1-1 -> 1:26.2.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded vulkan-radeon (1:26.2.1-1 -> 1:26.2.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded lib32-vulkan-radeon (1:26.2.1-1 -> 1:26.2.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded libcgif (0.5.3-1 -> 0.5.4-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded libde265 (1.1.1-1 -> 1.1.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded libebml (1.4.5-3 -> 1.4.7-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded libheif (1.23.2-1 -> 1.23.3-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded libnftnl (1.3.1-1 -> 1.3.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded libnice (0.1.23-1 -> 0.1.24-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded localsearch (3.11.1-2 -> 3.11.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded mympd (25.3.0-1 -> 26.0.0-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded nftables (1:1.1.6-3 -> 1:1.1.7-3)
[2026-09-03T22:49:18+0200] [ALPM] upgraded nodejs (26.8.1-1 -> 26.8.1-2)
[2026-09-03T22:49:19+0200] [ALPM] upgraded noto-fonts-extra (1:2026.08.01-1 -> 1:2026.09.01-1)
[2026-09-03T22:49:19+0200] [ALPM] upgraded openxr (1.1.60-1 -> 1.1.60-2)
[2026-09-03T22:49:19+0200] [ALPM] upgraded python-brotlicffi (1.2.0.1-4 -> 1.2.0.2-1)
[2026-09-03T22:49:19+0200] [ALPM] upgraded python-lxml (6.1.2_1-1 -> 6.1.3_1-1)
[2026-09-03T22:49:19+0200] [ALPM] upgraded python-platformdirs (4.11.5-1 -> 4.11.7-1)
[2026-09-03T22:49:19+0200] [ALPM] upgraded python-regex (2026.8.31-1 -> 2026.9.3-1)
[2026-09-03T22:49:19+0200] [ALPM] upgraded rustup (1.29.0-2 -> 1.29.1-1)
[2026-09-03T22:49:19+0200] [ALPM-SCRIPTLET] You may need to run rustup self upgrade-data
[2026-09-03T22:49:19+0200] [ALPM] upgraded unibilium (2.1.2-1 -> 2.1.4-1)
[2026-09-03T22:49:19+0200] [ALPM] upgraded waybar (0.15.0-2 -> 0.15.0-3)
[2026-09-03T22:49:19+0200] [ALPM] upgraded wireplumber-docs (0.5.16-1 -> 0.5.17-1)
[2026-09-03T22:49:19+0200] [ALPM] upgraded wireshark-cli (4.7.2-1 -> 4.7.3-1)
[2026-09-03T22:49:19+0200] [ALPM] upgraded wireshark-qt (4.7.2-1 -> 4.7.3-1)
[2026-09-03T22:49:20+0200] [ALPM] transaction completed
[2026-09-03T22:49:20+0200] [ALPM] running '20-systemd-sysusers.hook'...
[2026-09-03T22:49:21+0200] [ALPM] running '21-systemd-tmpfiles.hook'...
[2026-09-03T22:49:21+0200] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2026-09-03T22:49:21+0200] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2026-09-03T22:49:21+0200] [ALPM] running '30-update-mime-database.hook'...
[2026-09-03T22:49:21+0200] [ALPM] running '35-systemd-enqueue-marked.hook'...
[2026-09-03T22:49:22+0200] [ALPM] running '35-systemd-udev-reload.hook'...
[2026-09-03T22:49:22+0200] [ALPM] running '35-systemd-update.hook'...
[2026-09-03T22:49:22+0200] [ALPM] running 'fontconfig.hook'...
[2026-09-03T22:49:22+0200] [ALPM] running 'fontconfig-32.hook'...
[2026-09-03T22:49:23+0200] [ALPM] running 'glib-compile-schemas.hook'...
[2026-09-03T22:49:23+0200] [ALPM] running 'gtk-update-icon-cache.hook'...
[2026-09-03T22:49:23+0200] [ALPM] running 'notify-orphans.hook'...
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] electron39 39.8.10-2
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] lib32-gst-plugins-base-libs 1.28.1-3
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] lib32-libtheora 1.2.0-1
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] lib32-libusb 1.0.30-1
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] lib32-libvdpau 1.5-3
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] lib32-mpg123 1.33.7-1
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] lib32-openal 1.25.2-1
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] lib32-speex 1.2.1-2
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] lib32-vkd3d 1.19-1
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] libsoup 2.74.3-4
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] litehtml0.9 0.9-2
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] mbedtls 4.2.0-1
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] meson 1.12.0-1
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] python-sgmllib3k 1.0.0-8
[2026-09-03T22:49:23+0200] [ALPM-SCRIPTLET] scdoc 1.11.5-1
[2026-09-03T22:49:23+0200] [ALPM] running 'rebuild-detector.hook'...
[2026-09-03T22:49:26+0200] [ALPM-SCRIPTLET] foreign zen-browser-bin
[2026-09-03T22:49:26+0200] [ALPM] running 'texinfo-install.hook'...
[2026-09-03T22:49:26+0200] [ALPM] running 'update-desktop-database.hook'...Furthermore I'm going to provide the full
pacman -Qii niri since this seems to be an issue at least connected to it (again, no stutter on sway)
Name : niri
Version : 26.04-1
Description : A scrollable-tiling Wayland compositor
Architecture : x86_64
URL : https://github.com/YaLTeR/niri
Licenses : GPL-3.0-or-later
Groups : None
Provides : wayland-compositor
Depends On : cairo glib2 glibc libdisplay-info libgcc libinput libpipewire libxkbcommon mesa pango pixman seatd systemd-libs xdg-desktop-portal-impl
Optional Deps : alacritty: a suggested GPU-accelerated terminal emulator [installed]
bash: for niri-session script [installed]
fuzzel: a suggested Wayland application launcher
mako: a suggested Wayland notification daemon
org.freedesktop.secrets: for apps to rely on secrets portal [installed]
swaybg: a suggested Wayland wallpaper tool [installed]
swaylock: a suggested Wayland screen locker [installed]
waybar: a suggested Wayland customizable desktop bar [installed]
xwayland-satellite: for running X11 apps in XWayland [installed]
xdg-desktop-portal-gtk: a suggested XDG desktop portal [installed]
xdg-desktop-portal-gnome: a XDG desktop portal required for screencasting [installed]
Required By : greetd-regreet
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 24.87 MiB
Packager : Caleb Maclennan <alerque@archlinux.org>
Build Date : Sat 25 Apr 2026 16:27:48 CEST
Install Date : Sat 18 Jul 2026 17:55:30 CEST
Install Reason : Explicitly installed
Install Script : No
Validated By : Signature
Backup Files : None
Extended Data : pkgtype=pkgLast edited by Elizabeth (Today 11:52:22)
Offline
#4 Today 15:53:02
- Elizabeth
- Member
- Registered: 2023-10-06
- Posts: 52
Re: Weird stuttering with a second monitor
Im posting this a separate reply due to its significance, as I think its important to highlight it.
I have done some more testing with sway and niri to see if its some userspace program causing this stutter, and in perhaps a result I shouldn't be surprised by, it seems that waybar is the culprit.
Very specifically, I have noticed the following: if waybar is running either as a service (e.g trough systemctl start waybar) or as a "normal" process (e.g. just running waybar in a terminal) the stutter appears in the cases I've described above.
Checking the journalctl logs for a single waybar launch and stop (via systemctl --user stop waybar) i see the following:
Sep 07 17:49:10 solemn-grove systemd[29346]: Started Highly customizable Wayland bar for Sway and Wlroots based compositors.
Sep 07 17:49:11 solemn-grove waybar[29465]: [2026-09-07 17:49:11.333] [info] Using configuration file /home/Elizabeth/.config/waybar/config.jsonc
Sep 07 17:49:11 solemn-grove waybar[29465]: [2026-09-07 17:49:11.335] [info] Discovered appearance 'dark'
Sep 07 17:49:11 solemn-grove waybar[29465]: [2026-09-07 17:49:11.344] [info] Using CSS file /home/Elizabeth/.config/waybar/style.css
Sep 07 17:49:11 solemn-grove waybar[29465]: [2026-09-07 17:49:11.357] [info] Niri IPC starting
Sep 07 17:49:11 solemn-grove waybar[29465]: [2026-09-07 17:49:11.407] [info] Bar configured (width: 40, height: 559) for output: DP-3
Sep 07 17:49:11 solemn-grove waybar[29465]: Plugged
Sep 07 17:49:11 solemn-grove waybar[29465]: Plugged
Sep 07 17:49:11 solemn-grove waybar[29465]: [2026-09-07 17:49:11.616] [info] Bar configured (width: 40, height: 1003) for output: eDP-1
Sep 07 17:49:11 solemn-grove waybar[29465]: [2026-09-07 17:49:11.616] [info] Bar configured (width: 40, height: 1080) for output: DP-3
Sep 07 17:49:25 solemn-grove systemd[29346]: Stopping Highly customizable Wayland bar for Sway and Wlroots based compositors...
Sep 07 17:49:25 solemn-grove systemd[29346]: Stopped Highly customizable Wayland bar for Sway and Wlroots based compositors.And checking the logs while running trough a terminal i see this
[2026-09-07 17:51:43.289] [info] Using configuration file /home/Elizabeth/.config/waybar/config.jsonc
[2026-09-07 17:51:43.291] [info] Discovered appearance 'dark'
[2026-09-07 17:51:43.299] [info] Using CSS file /home/Elizabeth/.config/waybar/style.css
[2026-09-07 17:51:43.316] [info] Niri IPC starting
[2026-09-07 17:51:43.368] [info] Bar configured (width: 40, height: 559) for output: DP-3
Plugged
Plugged
[2026-09-07 17:51:43.575] [info] Bar configured (width: 40, height: 1003) for output: eDP-1
[2026-09-07 17:51:43.576] [info] Bar configured (width: 40, height: 1080) for output: DP-3
Plugged
(...) (this is just a lot of repetition of "Plugged")
[2026-09-07 17:53:16.040] [info] Quitting.Unfortunately this doesn't give me a much better idea of what's happening under the hood, but I hope someone else can glimpse something from this
Edit: I dug a bit more and tried seeing if theres any specific waybar module causing this: the two prime suspects are the hardware modules (cpu, memory, thermals, power-profiles-daemon) and the battery module.
Furthermore, I cant quite tell but there seem to be very small amounts of stuttering with other modules too, but its so slight i cant tell if im just seeing things or if its actually there.
If anyone knows tools i could use to measure something like this id appreciate it.
Digging in a bit further I noticed that waybar updated on the 3rd, around the same time I noticed this lag. However, looking at the changes on the package repo I only see that it was rebuilt to support jsoncpp 1.9.8, and looking at that package's upstream I dont see any issues mentioning this, maybe the closest thing is a missing prototype for a function
For now I'm still unsure of where exactly this originates, so idk whether to move it to an issue page on the upstream sources.
Last edited by Elizabeth (Today 17:44:39)
Offline
#5 Today 18:08:36
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,706
Re: Weird stuttering with a second monitor
My initial guess would have been that the eDP
Display supports continuous frequencies
but w/ the waybar situation that's probably moot.
The "plugged" is from the battery module, https://github.com/Alexays/Waybar/issues/5226
The bar itself seems to show on both outputs, but those three lines happen within the same second as niri starting, so I doubt they're relevant.
=> I'd first try to disable all waybar modules and see whether the bar itself causes the stutter.
If not, bisect the modules (activate half of them, see whether that causes the problem. If not, activate half of the remains. If yes, deactivate half of the modules that caused the problem. And repeat the process)
Offline
#6 Today 18:56:00
- Elizabeth
- Member
- Registered: 2023-10-06
- Posts: 52
Re: Weird stuttering with a second monitor
seth wrote:
My initial guess would have been that the eDP
Display supports continuous frequencies
but w/ the waybar situation that's probably moot.
The "plugged" is from the battery module, https://github.com/Alexays/Waybar/issues/5226
The bar itself seems to show on both outputs, but those three lines happen within the same second as niri starting, so I doubt they're relevant.=> I'd first try to disable all waybar modules and see whether the bar itself causes the stutter.
If not, bisect the modules (activate half of them, see whether that causes the problem. If not, activate half of the remains. If yes, deactivate half of the modules that caused the problem. And repeat the process)
Ive already done that, but I just went to double check and found these modules to be the problem ones:
- cpu
- memory
- temperature
- battery
However, as I noted earlier, I cant tell if these are the only problem ones or if the other ones cause nigh unnoticeable stutter, and I dont really know of a way to measure those things in a way which would bypass my eyes.
Going off of what seems to be causing the issue, I'd hazard a guess and say that its some hardware interface being slow? However why its happened now all of a sudden I do not know, nor why it depends on which monitor or how many monitors I have turned on.
Last edited by Elizabeth (Today 18:57:12)
Offline
#7 Today 19:17:41
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,706
Re: Weird stuttering with a second monitor
why its happened now all of a sudden I do not know
[2026-08-23T13:59:09+0200] [ALPM] upgraded linux (7.1.8.arch1-3 -> 7.1.9.arch1-2)
[2026-09-03T22:49:19+0200] [ALPM] upgraded waybar (0.15.0-2 -> 0.15.0-3)Edit: or the mesa update
[2026-09-03T22:49:16+0200] [ALPM] upgraded mesa (1:26.2.1-1 -> 1:26.2.2-1)
[2026-09-03T22:49:18+0200] [ALPM] upgraded vulkan-radeon (1:26.2.1-1 -> 1:26.2.2-1)If we ignore the waybar rebuild, does this happen w/ the LTS kernel?
The kernel being more likely since waybar was just a jsoncpp rebuild, https://gitlab.archlinux.org/archlinux/ … e982f0b64d
What do those modules look like in your config?
Does polling the hardware manually cause the same stutters?
Does running "top"??
Last edited by seth (Today 19:20:06)
Offline
#8 Today 19:31:23
- Elizabeth
- Member
- Registered: 2023-10-06
- Posts: 52
Re: Weird stuttering with a second monitor
seth wrote:
If we ignore the waybar rebuild, does this happen w/ the LTS kernel?
I'm not quite sure how I would test that without having to reinstall my entire system?
seth wrote:
What do those modules look like in your config?
"battery": {
"interval": 1,
"states": {
"good":100,
"normal": 75,
"warning": 30,
"critical": 15
},
"format": "{icon}",
"format-full": "{icon}",
"format-charging": "?",
"format-plugged": "",
"format-alt": "{capacity}",
"format-charging-good": "",
"format-plugged-good": "",
"format-icons": [" "," "," "," "," "," "," "," "],
"tooltip-format": "Capacity: {capacity}%\nPower draw: {power}W\nTime to full/empty: {time}\nCycles: {cycles}\nCap/DesignCap: {health}%",
"events": {
"on-discharging-warning": "notify-send -u normal 'Low Battery'",
"on-discharging-critical": "notify-send -u critical 'Very Low Battery'",
"on-charging-100": "notify-send -u normal 'Battery is full'",
}
},
"cpu": {
"interval": 1,
"format": "{icon}",
"tooltip": true,
"format-icons": ["?","?","?","?","?","?","?","?","?"]
},
"memory": {
"interval": 1,
"format": "{icon}",
"format-icons": ["?","?","?","?","?","?","?","?","?"],
"tooltip-format": "Used: {used}GiB of {total}Gib\nSwap: {swapUsed}GiB of {swapTotal}GiB"
},
"temperature": {
// "thermal-zone": 2,
// "hwmon-path": "/sys/class/hwmon/hwmon2/temp1_input",
"format-critical": "",
"interval": 1,
"critical-threshold": 60,
"format": "{icon}",
"format-icons": ["", ""],
"tooltip-format": "Celsius: {temperatureC}°C\nFahrenheit: {temperatureF}°F\nKelvin: {temperatureK}K"
},seth wrote:
Does polling the hardware manually cause the same stutters?
Does running "top"??
Im not sure how to manually poll hardware but im still pretty sure it does since running btop++ causes the same lag.
Also running top seems to cause lag every time it refreshes, which im seeing polls cpu so the conclusion here seems to be that the lag is a kernel issue with polling hardware?
Last edited by Elizabeth (Today 19:36:52)
Offline
#9 Today 19:35:04
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,706
Re: Weird stuttering with a second monitor
You can just install https://archlinux.org/packages/core/x86_64/linux-lts/ and add it to your bootloader and boot that instead of the main kernel.
o the conclusion here seems to be that the lag is a kernel issue with polling hardware?
Likely, are there messages in "dmesg -W" when those lags occur? (Though those would also show in the system journal)
Offline
#10 Today 19:38:49
- Elizabeth
- Member
- Registered: 2023-10-06
- Posts: 52
Re: Weird stuttering with a second monitor
seth wrote:
You can just install https://archlinux.org/packages/core/x86_64/linux-lts/ and add it to your bootloader and boot that instead of the main kernel.
o the conclusion here seems to be that the lag is a kernel issue with polling hardware?
Likely, are there messages in "dmesg -W" when those lags occur? (Though those would also show in the system journal)
No messages from what I can see
Ive also found that very concerningly the lag happens every time I press a key on my keyboard, or at least when I do it slowly, since when I keymash it seems to go away, so maybe its a cache issue of some sort?
Edit: small correction, it seems to happen when pressing a key while im focused on my inbedded monitor and not the external one?????
Last edited by Elizabeth (Today 19:40:48)
Offline
#11 Today 19:43:14
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,706
Re: Weird stuttering with a second monitor
It might be just the visual update triggered and the VRR after all…
Does this cause the stutter?
for ((i=0;i<20;++i)); do echo $i; sleep 1; doneOffline
#12 Today 19:49:07
- Elizabeth
- Member
- Registered: 2023-10-06
- Posts: 52
Re: Weird stuttering with a second monitor
seth wrote:
It might be just the visual update triggered and the VRR after all…
Does this cause the stutter?for ((i=0;i<20;++i)); do echo $i; sleep 1; done
Yep, thats unusual but it does cause it. Though idk how that would explain it lagging with waybar since a lot of the time theres no visual updates?
Testing it a bit more with btop and top it does seem to be consistently lagging when theres visual updates and not lagging when there arent.
Offline
#13 Today 19:53:15
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,706
Re: Weird stuttering with a second monitor
Pretty sure waybar updates the cpu load/temperature/… and even if the value doesn't change, that's still a repaint.
It's probably the VRR then and more likely the kernel than mesa - test the LTS kernel (or you can also downgrade the kernel in isolation, https://wiki.archlinux.org/title/Arch_Linux_Archive - it's largely self-contained and not subject to the usual partial update concerns)
Edit: in case you wonder and assuming your reference is the mouse cursor, that's rendered differently, in hardware and directly into the framebuffer.
Last edited by seth (Today 19:54:29)
Offline
#14 Today 19:54:55
- Elizabeth
- Member
- Registered: 2023-10-06
- Posts: 52
Re: Weird stuttering with a second monitor
seth wrote:
Pretty sure waybar updates the cpu load/temperature/… and even if the value doesn't change, that's still a repaint.
It's probably the VRR then and more likely the kernel than mesa - test the LTS kernel (or you can also downgrade the kernel in isolation, https://wiki.archlinux.org/title/Arch_Linux_Archive - it's largely self-contained and not subject to the usual partial update concerns)
Im gonna test the LTS kernel tomorrow since its a bit late here and I dont wanna bother with it rn, thanks for all the help!
Edit: also my reference is both my cursor and a video of a ball moving smoothly across the screen, and they both seem to coincide in the lag
Last edited by Elizabeth (Today 19:56:07)
Offline
#15 Today 20:39:42
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 77,706
Re: Weird stuttering with a second monitor
Take all the time you want/need.
Ftr, what are you playing that video in and what FPS is it?
Is the stutter hiccup from playing PAL or a 24fps movie on 60Hz?
https://en.wikipedia.org/wiki/Telecine#Telecine_judder
(Wondering why its updates would not cause any lags but be stalled elsewise)
Offline
Pages: 1