You are not logged in.

#26 2018-05-30 13:42:43

loqs
Member
Registered: 2014-03-06
Posts: 11,215

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

git checkout v4.16
git revert --strategy-option=ours 0e1f0ea -n

This is on a kernel git tree either mainline or stable.  If it is using a PKGBUILD then cd ../.. followed by makepkg -e

Offline

#27 2018-05-30 15:32:18

Arch Linux Tux
Member
Registered: 2017-04-01
Posts: 32
Website

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

No, he said without 0e1f0ea.

But I'm not too sure, what he meant. He'll tell me hopefully.

Maybe he meant v4.16 with the two cherry-picks (854e55ad289ef8888e7991f0ada85d5846f5afb9
and ad343a98e74e85aa91d844310e797f96fee6983b).

He hopefully will tell me.

Offline

#28 2018-05-30 15:48:03

loqs
Member
Registered: 2014-03-06
Posts: 11,215

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Mathias Nyman wrote:

How about v4.16 without 0e1f0ea? (reverting it) how does that behave?

The instructions I provided are for v4.16 with 0e1f0ea reverted which leaves 4.16 without 0e1f0ea.

Offline

#29 2018-05-30 16:38:09

whitesnow
Member
Registered: 2015-01-04
Posts: 51

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

loqs wrote:
git checkout v4.16
git revert --strategy-option=ours 0e1f0ea -n

This is on a kernel git tree either mainline or stable.  If it is using a PKGBUILD then cd ../.. followed by makepkg -e


for me that produces

make
  CHK     include/config/kernel.release
  CHK     include/generated/uapi/linux/version.h
  CHK     include/generated/utsrelease.h
  CHK     include/generated/bounds.h
  CHK     include/generated/timeconst.h
...

../lib/str_error_r.c: In function ‘str_error_r’:
../lib/str_error_r.c:25:3: error: passing argument 1 to restrict-qualified parameter aliases with argument 5 [-Werror=restrict]
   snprintf(buf, buflen, "INTERNAL ERROR: strerror_r(%d, %p, %zd)=%d", errnum, buf, buflen, err);
   ^~~~~~~~
cc1: all warnings being treated as errors

Offline

#30 2018-05-30 16:48:02

loqs
Member
Registered: 2014-03-06
Posts: 11,215

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

If you cherry pick the two commits for gcc8 support?

git -n cherry-pick 854e55ad289ef8888e7991f0ada85d5846f5afb9
git -n cherry-pick ad343a98e74e85aa91d844310e797f96fee6983b

Edit:
Added the -n option to not make commits to match the previous git revert alternatively you could use

git checkout v4.16
git revert --strategy-option=ours 0e1f0ea
git cherry-pick 854e55ad289ef8888e7991f0ada85d5846f5afb9
git cherry-pick ad343a98e74e85aa91d844310e797f96fee6983b

Last edited by loqs (2018-05-30 16:56:12)

Offline

#31 2018-05-30 17:18:40

whitesnow
Member
Registered: 2015-01-04
Posts: 51

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Thank you, loqs.

I added the -n switch to all beside the checkout.

make is now running.

Will see, how much time I will have to spend on that.

Edit: finished, and booted.

So, no help this time. no device recognized at the controller. And on USB 2.0 no SMART values shown.
the /dev/sdc in the dmesg output below is connected to USB 2.0, after the USB 3.0 port did not show it.
Edit: see below, it did work, at least once

[    0.000000] Linux version 4.16.0-ARCH-renesas+ (user@machine1.example.com) (gcc version 8.1.0 (GCC)) #2 SMP PREEMPT Wed May 30 20:26:31 CEST 2018
...
[  216.110841] pci 0000:05:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[  216.111058] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  216.111951] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3

..
[  247.264734] xhci_hcd 0000:05:00.0: can't setup: -110
[  247.264766] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[  247.264848] xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -110
[  247.264879] xhci_hcd: probe of 0000:05:00.0 failed with error -110
[  257.165217] usb 2-1.1: USB disconnect, device number 3
..
[  429.436835] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[  429.440133] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[  429.443724] pci 0000:05:00.0: PME# supported from D0 D3hot
[  429.456687] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[  429.459999] pci 0000:05:00.0: enabling device (0000 -> 0002)
[  435.516135] pci 0000:05:00.0: xHCI HW not ready after 5 sec (HC bug?) status = 0x801
[  435.517197] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  435.518072] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  438.106559] usb 2-1.1: new high-speed USB device number 4 using ehci-pci
[  438.803344] usbcore: registered new interface driver usb-storage
[  438.807561] scsi host4: uas
[  438.809047] usbcore: registered new interface driver uas
[  438.810139] scsi 4:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[  438.812665] sd 4:0:0:0: Attached scsi generic sg2 type 0
[  438.813011] sd 4:0:0:0: [sdc] Spinning up disk...
[  439.839893] ......ready
[  444.909225] sd 4:0:0:0: [sdc] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[  444.930346] sd 4:0:0:0: [sdc] Write Protect is off
[  444.931695] sd 4:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[  444.933602] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  445.112869]  sdc: sdc1 sdc2 sdc3
[  445.116970] sd 4:0:0:0: [sdc] Attached SCSI disk
[  466.607688] xhci_hcd 0000:05:00.0: can't setup: -110
[  466.608119] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[  466.608607] xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -110
[  466.609029] xhci_hcd: probe of 0000:05:00.0 failed with error -110

todo:
insert the card at boot time.
edit:

I should have made a note of each little step, I did.
But what I remember:
Reboot with card inserted. Did not work.

Power off, remove power cable, remove battery, push power button to switch on, card was removed.
After that, reconnect all, put the USB3 card into the slot.
Boot up.
No device recognized.

Remove card, reinsert card.

device shows.

[    0.000000] Linux version 4.16.0-ARCH-renesas+ (user@machine1.example.com) (gcc version 8.1.0 (GCC)) #2 SMP PREEMPT Wed May 30 20:26:31 CEST 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux4.16.0-ARCH-renesas+ "acpi_osi=!Windows 2012" root=/dev/sda12 zswap.enabled=1 zswap.compressor=lz4 rw acpi_osi=Linux threadirqs pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 drm.debug=0xe intel_iommu=igfx_off intel_iommu=soft pciehp.pciehp_force=1 verbose debug

[   72.915304] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   72.915311] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   72.920586] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[   72.921124] hub 3-0:1.0: USB hub found
[   72.922088] hub 3-0:1.0: 2 ports detected
[   72.922680] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   72.922684] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[   72.924101] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   72.925733] hub 4-0:1.0: USB hub found
[   72.925744] hub 4-0:1.0: 2 ports detected
[   73.250020] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[   74.273885] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[   74.870888] usb-storage 3-1:1.0: USB Mass Storage device detected
[   74.871678] scsi host4: usb-storage 3-1:1.0
[   74.872320] usbcore: registered new interface driver usb-storage
[   74.879429] scsi host5: uas
[   74.880120] usbcore: registered new interface driver uas
[   74.881221] scsi 5:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[   74.882418] sd 5:0:0:0: Attached scsi generic sg2 type 0
[   74.882765] sd 5:0:0:0: [sdc] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
...
[   75.168568] sd 5:0:0:0: [sdc] Write Protect is off
[   75.171102] sd 5:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[   75.173896] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   75.176015] xhci_hcd 0000:05:00.0: ERROR Transfer event for unknown stream ring slot 3 ep 2
[   75.177172] xhci_hcd 0000:05:00.0: @00000003f4f055f0 00000000 00000000 1b000000 03038001
[   75.538169] systemd-journald[286]: Successfully sent stream file descriptor to service manager.
[   75.540504] systemd-journald[286]: Successfully sent stream file descriptor to service manager.
[   75.566508] systemd-journald[286]: Successfully sent stream file descriptor to service manager.
[   75.574355] systemd-journald[286]: Successfully sent stream file descriptor to service manager.
[   75.575969] systemd-journald[286]: Successfully sent stream file descriptor to service manager.
[   75.577960] systemd-journald[286]: Successfully sent stream file descriptor to service manager.
[   75.581890] systemd-journald[286]: Successfully sent stream file descriptor to service manager.
[   75.894654] scsi 4:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[   75.896727] sd 4:0:0:0: Attached scsi generic sg3 type 0
[   75.896928] sd 4:0:0:0: [sdd] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)
[   75.900691] sd 4:0:0:0: [sdd] Write Protect is off
[   75.901941] sd 4:0:0:0: [sdd] Mode Sense: 43 00 00 00
[   75.904268] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   75.913761]  sdd: sdd1 sdd2
[   75.917525] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[   75.988485]  sdc: sdc1 sdc2 sdc3
[   75.991170] sd 5:0:0:0: [sdc] Attached SCSI disk
[   86.713499] xhci_hcd 0000:05:00.0: remove, state 1
[   86.714589] usb usb4: USB disconnect, device number 1
[   86.715705] usb 4-2: USB disconnect, device number 2
[   86.718164] sd 5:0:0:0: [sdc] Synchronizing SCSI cache
[   86.920034] sd 5:0:0:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x07 driverbyte=0x00
[   92.394569] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[   92.395073] xhci_hcd 0000:05:00.0: Timeout while waiting for configure endpoint command
[   92.395237] xhci_hcd 0000:05:00.0: WARN Can't disable streams for endpoint 0x81, streams are being disabled already
[   92.395828] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[   92.395886] xhci_hcd 0000:05:00.0: remove, state 1
[   92.395891] usb usb3: USB disconnect, device number 1
[   92.395893] usb 3-1: USB disconnect, device number 2
[   92.447996] xhci_hcd 0000:05:00.0: Host halt failed, -19
[   92.449988] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[   92.452263] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[   92.513700] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[   92.515090] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[   92.516870] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[   92.526800] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[   92.527638] pci 0000:05:00.0: enabling device (0000 -> 0002)
[   92.528719] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   92.529530] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[   92.535686] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[   92.537037] hub 3-0:1.0: USB hub found
[   92.537746] hub 3-0:1.0: 2 ports detected
[   92.538561] xhci_hcd 0000:05:00.0: xHCI Host Controller
[   92.539278] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[   92.540078] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   92.540987] hub 4-0:1.0: USB hub found
[   92.542107] hub 4-0:1.0: 2 ports detected
[   92.866671] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[   93.014056] usb-storage 3-1:1.0: USB Mass Storage device detected
[   93.015844] scsi host4: usb-storage 3-1:1.0
[   93.893861] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[   93.923092] scsi host5: uas
[   93.925387] scsi 5:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[   93.930260] sd 5:0:0:0: Attached scsi generic sg2 type 0
[   93.930573] sd 5:0:0:0: [sdc] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[   93.931488] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[   93.932099] sd 5:0:0:0: [sdc] Write Protect is off
[   93.932636] sd 5:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[   93.933345] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   93.934363] xhci_hcd 0000:05:00.0: ERROR Transfer event for unknown stream ring slot 3 ep 2
[   93.935062] xhci_hcd 0000:05:00.0: @00000003f6feb5f0 00000000 00000000 1b000000 03038001
[   94.028226] scsi 4:0:0:0: Direct-Access     SanDisk  Ultra Fit        1.00 PQ: 0 ANSI: 6
[   94.030688] sd 4:0:0:0: Attached scsi generic sg3 type 0
[   94.030842] sd 4:0:0:0: [sdd] 60062500 512-byte logical blocks: (30.8 GB/28.6 GiB)
[   94.033413] sd 4:0:0:0: [sdd] Write Protect is off
[   94.034156] sd 4:0:0:0: [sdd] Mode Sense: 43 00 00 00
[   94.035670] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   94.042819]  sdd: sdd1 sdd2
[   94.047112] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[   94.206000]  sdc: sdc1 sdc2 sdc3
[   94.209602] sd 5:0:0:0: [sdc] Attached SCSI disk

Last edited by whitesnow (2018-05-30 19:54:31)

Offline

#32 2018-05-30 20:32:38

loqs
Member
Registered: 2014-03-06
Posts: 11,215

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

I should explain why I used --strategy-option=ours

git revert 0e1f0ea
Performing inexact rename detection: 100% (6627390/6627390), done.
error: could not revert 0e1f0eaed6c2... xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit

The strategy-option=ours tells git to force conflicting hunks to be auto-resolved cleanly by favoring our version (in this case the 4.16 version)

git revert --strategy-option=ours 0e1f0ea

Hopefully the testing and dmesg output help Mathias its beyond me sorry.

Offline

#33 2018-06-02 11:44:07

aphirst
Member
From: Hull, England
Registered: 2008-06-30
Posts: 99
Website

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

I can confirm similar behaviour with all the 2-port 34mm "UPD720201/202"-based adapters I've used. With "stock" linux from the repo (every version since at least ~August, which coincidentally seems to be when a relevant commit was made, though I haven't tested earlier versions), the device seems to work if you hotplug it, but it fails to be initialised if present on boot. I can provide more details on request, but my case seems to be essentially identical to the OP.

Last edited by aphirst (2018-06-02 11:45:23)


ArchLinux | x86_64 | linux-ck-ivybridge
ThinkPad X230 | 12.5" | i5-3320M (2.5GHz) | HD 4000 | 16GB (1600MHz) | 256GB mSATA SSD | 2TB HDD
ThinkPad T430 | 14.1" | i7-3520M (2.9GHz) | GF108M (NVS 5400M) | 16GB (1600MHz) | 256GB mSATA SSD | 1TB HDD | 500GB HDD

Offline

#34 2018-07-21 13:46:49

Arch Linux Tux
Member
Registered: 2017-04-01
Posts: 32
Website

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Hello,

are there any news, yet?

Mathias Nyman asked me, if I had any logs about 4.16 + Renesas v3 patches?

I wrote to him, but got no response. And my mail also did not show up in the mailing list.

I don't even know, if he received the e-mail. So how do I answer to an mailing list e-mail so that the answer shows up in the mailing list?

Apart from that, he asked me to compile the kernel v4.16 with 0e1f0ea reverted.

I didn't succeed. I got the following eror message:

RpQ05LZ.jpg

Warning: /lib/modules/4.16.0-ARCH+/modules.devname not found - ignoring
starting version 238
ERROR: device 'UUID=xxx' not found. Skipping fsck.
mount: /new_root: can't find UUID=xxx.
You are now being dropped into an emergency shell.
sh: can't access tty: job control turned off
[rootfs ]#

I thought I might should try building the kernel with PKGBUILD - unfortunately, I don't know, how to make a fitting PKGBUILD file and accompanying build files.

Apart from that: Did anybody successfully trying to test the configuration kernel v4.16 with 0e1f0ea reverted?

So the question, that really interests me is: Are there any advances with the bug fix of this issue?

I mean: I tried the newest kernel kernel 4.17.8-1 ARCH, but it doesn't work with my card. So is this issue still worked on? Or doesn't anyone still care about it anymore anyways?

Last edited by Arch Linux Tux (2018-07-21 13:53:24)

Offline

#35 2018-07-21 17:24:40

R00KIE
Forum Moderator
From: Between a computer and a chair
Registered: 2008-09-14
Posts: 4,734

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Might not be of much help but I have a pcie addon card with a uPD720202 chip which seems to be working properly with the current stable kernel (4.17.8-1-ARCH). I'm managing to boot an install with the root filesystem on a flash drive connected to one of the 2 ports on the addon card.

Boot is on a separate flash drive since the motherboard cannot "see" any devices connected to the addon card.

Connecting a usb3 external disk also works just fine after the system is booted.

04:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 19
	NUMA node: 0
	Region 0: Memory at fd9fe000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
		Vector table: BAR=0 offset=00001000
		PBA: BAR=0 offset=00001080
	Capabilities: [a0] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 unlimited
			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s (downgraded), Width x1 (ok)
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Not Supported
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
			 AtomicOpsCtl: ReqEn-
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
		AERCap:	First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
		HeaderLog: 00000000 00000000 00000000 00000000
	Capabilities: [150 v1] Latency Tolerance Reporting
		Max snoop latency: 0ns
		Max no snoop latency: 0ns
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

You should try to check if there are any firmware updates for the chip/addon card and install them. The bad news is that it might not be easy to find the firmware updates if any and if there are updates most probably you will need windows to run the updater/flash tool.

The flash drives and external disk do work at the expected speeds, see the relevant lsusb output

Bus 007 Device 002: ID 8564:1000 Transcend Information, Inc. JetFlash
Bus 007 Device 003: ID 152d:3569 JMicron Technology Corp. / JMicron USA Technology Corp. JMS566 SATA 3Gb/s bridge

/:  Bus 07.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
    |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
    |__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M

R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K

Offline

#36 2018-07-21 18:44:19

Arch Linux Tux
Member
Registered: 2017-04-01
Posts: 32
Website

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

I could not find a program to update the firmware of my CSL USB 3.0 Express Card 34mm (with Renesas uPD720202 chip).

Do you know if there is a program to update the firmware for this card?

Last edited by Arch Linux Tux (2018-07-21 18:47:50)

Offline

#37 2018-07-21 19:01:10

R00KIE
Forum Moderator
From: Between a computer and a chair
Registered: 2008-09-14
Posts: 4,734

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Last time I looked into it I have downloaded the firmware updater and windows drivers from here: https://www.station-drivers.com/index.p … lang=en-nz

That said, I never had problem on linux but on windows it seems more recent firmwares and drivers did fix some weird problems.


R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K

Offline

#38 2018-07-21 19:09:47

Arch Linux Tux
Member
Registered: 2017-04-01
Posts: 32
Website

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

This seems to be the latest firmware.

Didn't affirm it matches the card, yet.

Last edited by Arch Linux Tux (2018-07-21 19:10:17)

Offline

#39 2018-08-06 12:49:56

Eregus
Member
Registered: 2013-04-02
Posts: 20

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Hello,

I use ThinkPad T420 and I have the same problem, athough it doesn't work both when present on boot and when I hotplug it. I have the latest firmware (2.0.2.6). It works properly on Windows.

lspci:

05:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI])
        Physical Slot: 1
        Flags: bus master, VGA palette snoop, stepping, fast Back2Back, 66MHz, user-definable features, ?? devsel, latency 0, IRQ 19
        [virtual] Memory at f1c00000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [50] Power Management version 3
        Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
        Capabilities: [90] MSI-X: Enable- Count=8 Masked-
        Capabilities: [a0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [150] Latency Tolerance Reporting
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

Dmesg when present on boot:

[  +0.337059] xhci_hcd 0000:05:00.0: Resetting
[  +0.041005] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  +0.000019] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  +0.000074] xhci_hcd 0000:05:00.0: Host halt failed, -19
[  +0.000003] xhci_hcd 0000:05:00.0: can't setup: -19
[  +0.001780] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[  +0.000135] xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -19

Dmesg when hotplugging:

[  +0.024731] xhci_hcd 0000:05:00.0: Resetting
[  +1.024683] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  +0.000037] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[  +0.005387] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000090
[  +0.000003] usb usb3: Manufacturer: Linux 4.17.11-arch1 xhci-hcd
[  +0.000187] xhci_hcd 0000:05:00.0: xHCI Host Controller
[  +0.000005] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[  +0.000003] xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed
[  +0.000004] usb usb4: Manufacturer: Linux 4.17.11-arch1 xhci-hcd

I guess it's the same bug, isn't it?

Offline

#40 2018-11-02 15:09:11

dreieck
Member
Registered: 2012-10-08
Posts: 15

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

I have a card with such a chip and it works perfectly with 4.18.14-kernel (self-compiled).

Here is my kernel config:

http://ix.io/1qK6

Here my kernel boot command line:

root=/dev/mapper/btrfs_root rootflags=subvol=/subvolumes/root,compress=lzo,ssd,ssd_spread,noautodefrag,discard,relatime,commit=60 ro pcie_aspm=force vt.default_utf8=1 fbcon=font:VGA8x8 acpi_backlight=vendor intel_iommu=on acpi_osi=Linux loglevel=9 vga=6

My kernel is a 4.18.0 mainline kernel patched (in this order) with [-pf]-patchset (4.18-pf9, which also brings it to 4.18.14-state), [vfio] and [phc-intel], and I don't think that any of those patches should have an effect on the functioning of my card.

The output of `lspci -vv` for this card:

05:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02) (prog-if 30 [XHCI])
        Physical Slot: 3
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at f1f00000 (64-bit, non-prefetchable) [size=8K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
                Vector table: BAR=0 offset=00001000
                PBA: BAR=0 offset=00001080
        Capabilities: [a0] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
                LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 unlimited
                        ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s (downgraded), Width x1 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+, OBFF Not Supported
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
                         AtomicOpsCtl: ReqEn-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 00000000 00000000 00000000 00000000
        Capabilities: [150 v1] Latency Tolerance Reporting
                Max snoop latency: 0ns
                Max no snoop latency: 0ns
        Kernel driver in use: xhci_hcd
        Kernel modules: xhci_pci

Last edited by dreieck (2018-11-02 15:24:25)

Offline

#41 2018-11-11 14:08:06

whitesnow
Member
Registered: 2015-01-04
Posts: 51

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

here: https://askubuntu.com/questions/1076169 … -to-usb3-0
it says

Turns out that xchi is working --- on older systems with a BIOS that does not support USB3.0.....

You MUST disable legacy usb support in BIOS ...

Still not 5Gbit transfer, but it is faster than USB2.0.

Slight drawback is that you lose being able to boot from a USB flash drive or similar.

Which kind of works on my machine. Still have to test, I had disconnects, if it was because of moving the laptop and loosing cable connection or another problem.

Still, this does nothing in regard of why it was working, and gave SMART values in the older kernel with USB legacy support in BIOS enabled.

So for now, this was repeatable. So it was, but is not. Don't want to reboot just now. It already does not suspend any more. I was reading from that disk for some time two days ago. But there it lost connection, and regained it. Loosing the mount.

Now this is not successful, it got recognized, but quite quickly detached while mounting.

[86403.960313] xhci_hcd 0000:05:00.0: xHCI Host Controller                                                                                                                                                                                                                                                             
[86403.960327] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3                                                                                                                                                                                                                                    
[86403.960528] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004                                                                                                                                                                                                                 
[86403.963215] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18                                                                                                                                                                                                                          
[86403.963220] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                                                                                                                                                                                                      
[86403.963223] usb usb3: Product: xHCI Host Controller                                                                                                                                                                                                                                                                 
[86403.963226] usb usb3: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd                                                                                                                                                                                                                                             
[86403.963228] usb usb3: SerialNumber: 0000:05:00.0                                                                                                                                                                                                                                                                    
[86403.963784] hub 3-0:1.0: USB hub found                                                                                                                                                                                                                                                                              
[86403.963925] hub 3-0:1.0: 2 ports detected                                                                                                                                                                                                                                                                           
[86403.964168] xhci_hcd 0000:05:00.0: xHCI Host Controller                                                                                                                                                                                                                                                             
[86403.964176] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4                                                                                                                                                                                                                                    
[86403.964182] xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed                                                                                                                                                                                                                                                
[86403.964496] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.                                                                                                                                                                                                                            
[86403.964552] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18                                                                                                                                                                                                                          
[86403.964555] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                                                                                                                                                                                                      
[86403.964558] usb usb4: Product: xHCI Host Controller                                                                                                                                                                                                                                                                 
[86403.964560] usb usb4: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd                                                                                                                                                                                                                                             
[86403.964562] usb usb4: SerialNumber: 0000:05:00.0                                                                                                                                                                                                                                                                    
[86403.965425] hub 4-0:1.0: USB hub found                                                                                                                                                                                                                                                                              
[86403.965599] hub 4-0:1.0: 2 ports detected                                                                                                                                                                                                                                                                           
[86405.053035] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd                                                                                                                                                                                                                                        
[86405.076940] usb 4-2: New USB device found, idVendor=0bc2, idProduct=61b7, bcdDevice= 0.00                                                                                                                                                                                                                           
[86405.076948] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1                                                                                                                                                                                                                                       
[86405.076953] usb 4-2: Product: M3 Portable                                                                                                                                                                                                                                                                           
[86405.076957] usb 4-2: Manufacturer: Seagate                                                                                                                                                                                                                                                                          
[86405.076961] usb 4-2: SerialNumber: xxx                                                                                                                                                                                                                                                                         
[86497.536657] xhci_hcd 0000:05:00.0: remove, state 4                                                                                                                                                                                                                                                                  
[86497.536672] usb usb4: USB disconnect, device number 1                                                                                                                                                                                                                                                               
[86497.536677] usb 4-2: USB disconnect, device number 2                                                                                                                                                                                                                                                                
[86497.537476] xhci_hcd 0000:05:00.0: USB bus 4 deregistered                                                                                                                                                                                                                                                           
[86497.537491] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead                                                                                                                                                                                                                                 
[86497.537499] xhci_hcd 0000:05:00.0: remove, state 4                                                                                                                                                                                                                                                                  
[86497.537511] usb usb3: USB disconnect, device number 1                                                                                                                                                                                                                                                               
[86497.537897] xhci_hcd 0000:05:00.0: Host halt failed, -19
[86497.537903] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[86497.538215] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[86499.383387] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[86499.383502] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[86499.383807] pci 0000:05:00.0: PME# supported from D0 D3hot
[86499.384161] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[86499.384215] pci 0000:05:00.0: enabling device (0000 -> 0002)
[86499.384788] xhci_hcd 0000:05:00.0: xHCI Host Controller
[86499.384800] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[86499.491221] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[86499.491575] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[86499.491577] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[86499.491578] usb usb3: Product: xHCI Host Controller
[86499.491579] usb usb3: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[86499.491580] usb usb3: SerialNumber: 0000:05:00.0
[86499.491735] hub 3-0:1.0: USB hub found
[86499.491747] hub 3-0:1.0: 2 ports detected
[86499.491881] xhci_hcd 0000:05:00.0: xHCI Host Controller
[86499.491884] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[86499.491888] xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed
[86499.494557] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[86499.494580] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[86499.494581] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[86499.494582] usb usb4: Product: xHCI Host Controller
[86499.494583] usb usb4: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[86499.494584] usb usb4: SerialNumber: 0000:05:00.0
[86499.494734] hub 4-0:1.0: USB hub found
[86499.494750] hub 4-0:1.0: 2 ports detected
[86499.836538] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[86499.859649] usb 4-2: New USB device found, idVendor=0bc2, idProduct=61b7, bcdDevice= 0.00
[86499.859658] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[86499.859663] usb 4-2: Product: M3 Portable
[86499.859667] usb 4-2: Manufacturer: Seagate
[86499.859671] usb 4-2: SerialNumber: xxx
[86499.865915] scsi host0: uas
[86499.866542] scsi 0:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[86499.867122] sd 0:0:0:0: Attached scsi generic sg0 type 0
[86499.867571] sd 0:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[86499.950124] sd 0:0:0:0: [sda] Write Protect is off
[86499.950131] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
[86499.950390] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[86500.086076]  sda: sda1 sda2 sda3
[86500.087783] sd 0:0:0:0: [sda] Attached SCSI disk
[86531.322287] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[86531.322295] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 0f 00 00 00 00 00 00 08 00 00
[86531.322306] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[86531.322341] usb 4-2: cmd cmplt err -108
[86531.322352] usb 4-2: cmd cmplt err -108
[86531.322354] usb 4-2: cmd cmplt err -108
[86531.322357] xhci_hcd 0000:05:00.0: HC died; cleaning up
[86531.322371] usb 4-2: USB disconnect, device number 2
[86531.322434] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD
[86531.322436] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 01 8e ff ff 80 00 00 00 08 00 00
[86531.322440] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD
[86531.322441] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 01 d1 c0 b7 80 00 00 00 08 00 00
[86531.322444] sd 0:0:0:0: tag#3 uas_zap_pending 0 uas-tag 4 inflight: CMD
[86531.322445] sd 0:0:0:0: tag#3 CDB: Test Unit Ready 00 00 00 00 00 00
[86531.322471] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[86531.322473] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 01 8e ff ff 80 00 00 00 08 00 00
[86531.322475] print_req_error: I/O error, dev sda, sector 6694109056
[86531.322506] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[86531.322508] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 01 d1 c0 b7 80 00 00 00 08 00 00
[86531.322510] print_req_error: I/O error, dev sda, sector 7814035328
[86531.325785] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[86531.338036] sd 0:0:0:0: Device offlined - not ready after error recovery
[86531.406165] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[86531.406171] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 0f 00 00 00 00 00 00 08 00 00
[86531.406174] print_req_error: I/O error, dev sda, sector 251658240
[86531.411043] Buffer I/O error on dev sda1, logical block 0, async page read
[86531.552322] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[86531.635513] xhci_hcd 0000:05:00.0: WARN Can't disable streams for endpoint 0x81, streams are being disabled already


[86749.552413] usb usb4: USB disconnect, device number 1                                                                                                                                                                                                                                                               
[86749.552900] xhci_hcd 0000:05:00.0: USB bus 4 deregistered                                                                                                                                                                                                                                                           
[86749.552914] xhci_hcd 0000:05:00.0: remove, state 4                                                                                                                                                                                                                                                                  
[86749.552921] usb usb3: USB disconnect, device number 1                                                                                                                                                                                                                                                               
[86749.553220] xhci_hcd 0000:05:00.0: Host halt failed, -19                                                                                                                                                                                                                                                            
[86749.553226] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.                                                                                                                                                                                                                                               
[86749.553607] xhci_hcd 0000:05:00.0: USB bus 3 deregistered                                                                                                                                                                                                                                                           
[86750.762604] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330                                                                                                                                                                                                                                                    
[86750.762676] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]                                                                                                                                                                                                                                           
[86750.762892] pci 0000:05:00.0: PME# supported from D0 D3hot                                                                                                                                                                                                                                                          
[86750.763118] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]                                                                                                                                                                                                                                     
[86750.763162] pci 0000:05:00.0: enabling device (0000 -> 0002)                                                                                                                                                                                                                                                        
[86750.763521] xhci_hcd 0000:05:00.0: xHCI Host Controller                                                                                                                                                                                                                                                             
[86750.763528] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3                                                                                                                                                                                                                                    
[86750.763707] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004                                                                                                                                                                                                                 
[86750.764216] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18                                                                                                                                                                                                                          
[86750.764219] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1                                                                                                                                                                                                                                      
[86750.764221] usb usb3: Product: xHCI Host Controller
[86750.764230] usb usb3: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[86750.764232] usb usb3: SerialNumber: 0000:05:00.0
[86750.764516] hub 3-0:1.0: USB hub found
[86750.764538] hub 3-0:1.0: 2 ports detected
[86750.764759] xhci_hcd 0000:05:00.0: xHCI Host Controller
[86750.764765] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[86750.764770] xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed
[86750.767061] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[86750.767109] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[86750.767112] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[86750.767115] usb usb4: Product: xHCI Host Controller
[86750.767117] usb usb4: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[86750.767120] usb usb4: SerialNumber: 0000:05:00.0
[86750.767318] hub 4-0:1.0: USB hub found
[86750.767342] hub 4-0:1.0: 2 ports detected
[86751.845659] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[86752.762862] wlp3s0: authenticate with a0:f3:c1:77:fa:82
[86752.767254] wlp3s0: send auth to a0:f3:c1:77:fa:82 (try 1/3)
[86752.819735] wlp3s0: authenticated
[86752.822067] wlp3s0: associate with a0:f3:c1:77:fa:82 (try 1/3)
[86752.823611] wlp3s0: RX AssocResp from a0:f3:c1:77:fa:82 (capab=0x11 status=0 aid=2)
[86752.841708] wlp3s0: associated
[86752.845224] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[86757.015468] usb 4-2: unable to get BOS descriptor set
[86757.016053] usb 4-2: unable to read config index 0 descriptor/start: -71
[86757.016062] usb 4-2: can't read configurations, error -71
[86757.898810] usb 4-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[86757.921940] usb 4-2: New USB device found, idVendor=0bc2, idProduct=61b7, bcdDevice= 0.00
[86757.921944] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[86757.921946] usb 4-2: Product: M3 Portable
[86757.921947] usb 4-2: Manufacturer: Seagate
[86757.921949] usb 4-2: SerialNumber: xxxx
[86757.933215] scsi host0: uas
[86757.933832] scsi 0:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[86757.934651] sd 0:0:0:0: Attached scsi generic sg0 type 0
[86757.935018] sd 0:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[86757.935023] sd 0:0:0:0: [sda] 4096-byte physical blocks
[86758.229518] sd 0:0:0:0: [sda] Write Protect is off
[86758.229525] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
[86758.229782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[86759.071208]  sda: sda1 sda2 sda3
[86759.076440] sd 0:0:0:0: [sda] Attached SCSI disk
[86790.307706] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[86790.307718] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 0f 00 00 00 00 00 00 08 00 00
[86790.307733] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[86790.307786] usb 4-2: cmd cmplt err -108
[86790.307789] usb 4-2: cmd cmplt err -108
[86790.307791] usb 4-2: cmd cmplt err -108
[86790.307793] xhci_hcd 0000:05:00.0: HC died; cleaning up
[86790.307808] usb 4-2: USB disconnect, device number 3
[86790.307878] sd 0:0:0:0: [sda] tag#1 uas_zap_pending 0 uas-tag 2 inflight: CMD 
[86790.307880] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 01 8e ff ff 80 00 00 00 08 00 00
[86790.307885] sd 0:0:0:0: [sda] tag#2 uas_zap_pending 0 uas-tag 3 inflight: CMD 
[86790.307886] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 01 d1 c0 b7 80 00 00 00 08 00 00
[86790.307889] sd 0:0:0:0: tag#3 uas_zap_pending 0 uas-tag 4 inflight: CMD 
[86790.307891] sd 0:0:0:0: tag#3 CDB: Test Unit Ready 00 00 00 00 00 00
[86790.307914] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[86790.307915] sd 0:0:0:0: [sda] tag#1 CDB: Read(16) 88 00 00 00 00 01 8e ff ff 80 00 00 00 08 00 00
[86790.307917] print_req_error: I/O error, dev sda, sector 6694109056
[86790.307942] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[86790.307944] sd 0:0:0:0: [sda] tag#2 CDB: Read(16) 88 00 00 00 00 01 d1 c0 b7 80 00 00 00 08 00 00
[86790.307945] print_req_error: I/O error, dev sda, sector 7814035328
[86790.315581] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[86790.321034] sd 0:0:0:0: Device offlined - not ready after error recovery
[86790.391307] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[86790.391312] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 0f 00 00 00 00 00 00 08 00 00
[86790.391315] print_req_error: I/O error, dev sda, sector 251658240
[86790.391534] Buffer I/O error on dev sda1, logical block 0, async page read
[86790.537691] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[86790.597752] xhci_hcd 0000:05:00.0: WARN Can't disable streams for endpoint 0x81, streams are being disabled already
[86974.182287] xhci_hcd 0000:05:00.0: remove, state 1
[86974.182296] usb usb4: USB disconnect, device number 1
[86974.183628] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[86974.183637] xhci_hcd 0000:05:00.0: remove, state 4
[86974.183644] usb usb3: USB disconnect, device number 1
[86974.183881] xhci_hcd 0000:05:00.0: Host halt failed, -19
[86974.183886] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[86974.184224] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[86976.218926] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[86976.219019] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[86976.219359] pci 0000:05:00.0: PME# supported from D0 D3hot
[86976.219706] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[86976.219744] pci 0000:05:00.0: enabling device (0000 -> 0002)
[86976.220268] xhci_hcd 0000:05:00.0: xHCI Host Controller
[86976.220278] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[86976.220453] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[86976.220901] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[86976.220904] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[86976.220906] usb usb3: Product: xHCI Host Controller
[86976.220908] usb usb3: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[86976.220910] usb usb3: SerialNumber: 0000:05:00.0
[86976.221331] hub 3-0:1.0: USB hub found
[86976.221498] hub 3-0:1.0: 2 ports detected
[86976.221834] xhci_hcd 0000:05:00.0: xHCI Host Controller
[86976.221842] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[86976.221848] xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed
[86976.224055] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[86976.224095] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[86976.224098] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[86976.224100] usb usb4: Product: xHCI Host Controller
[86976.224103] usb usb4: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[86976.224105] usb usb4: SerialNumber: 0000:05:00.0
[86976.224950] hub 4-0:1.0: USB hub found
[86976.225145] hub 4-0:1.0: 2 ports detected
[86977.308882] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[86977.332045] usb 4-2: New USB device found, idVendor=0bc2, idProduct=61b7, bcdDevice= 0.00
[86977.332053] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[86977.332057] usb 4-2: Product: M3 Portable
[86977.332062] usb 4-2: Manufacturer: Seagate
[86977.332066] usb 4-2: SerialNumber: xxx
[86977.338310] scsi host0: uas
[86977.339323] scsi 0:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[86977.340931] sd 0:0:0:0: Attached scsi generic sg0 type 0
[86977.341315] sd 0:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[86977.341317] sd 0:0:0:0: [sda] 4096-byte physical blocks
[86977.634106] sd 0:0:0:0: [sda] Write Protect is off
[86977.634110] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
[86977.634323] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[86978.464934]  sda: sda1 sda2 sda3
[86978.466853] sd 0:0:0:0: [sda] Attached SCSI disk
[87009.817653] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[87009.817658] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 0f 00 00 00 00 00 00 08 00 00
[87009.817667] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[87009.817685] xhci_hcd 0000:05:00.0: HC died; cleaning up
[87009.817702] usb 4-2: USB disconnect, device number 2
[87009.818629] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[87009.827691] sd 0:0:0:0: Device offlined - not ready after error recovery
[87009.844356] Buffer I/O error on dev sda3, logical block 139990768, async page read
[87009.852446] Buffer I/O error on dev sda2, logical block 268435440, async page read
[87009.891006] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[87009.891010] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 00 0f 00 00 00 00 00 00 08 00 00
[87009.891013] print_req_error: I/O error, dev sda, sector 251658240
[87009.891047] Buffer I/O error on dev sda1, logical block 0, async page read
[87010.041025] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[87010.108705] xhci_hcd 0000:05:00.0: WARN Can't disable streams for endpoint 0x81, streams are being disabled already
[87027.953860] xhci_hcd 0000:05:00.0: remove, state 1
[87027.953869] usb usb4: USB disconnect, device number 1
[87027.954120] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[87027.954128] xhci_hcd 0000:05:00.0: remove, state 4
[87027.954134] usb usb3: USB disconnect, device number 1
[87027.954311] xhci_hcd 0000:05:00.0: Host halt failed, -19
[87027.954315] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[87027.954574] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[87029.640659] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[87029.640729] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[87029.640956] pci 0000:05:00.0: PME# supported from D0 D3hot
[87029.641167] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[87029.641204] pci 0000:05:00.0: enabling device (0000 -> 0002)
[87029.641540] xhci_hcd 0000:05:00.0: xHCI Host Controller
[87029.641547] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[87029.641711] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[87029.642180] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[87029.642183] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[87029.642185] usb usb3: Product: xHCI Host Controller
[87029.642187] usb usb3: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[87029.642189] usb usb3: SerialNumber: 0000:05:00.0
[87029.642414] hub 3-0:1.0: USB hub found
[87029.642430] hub 3-0:1.0: 2 ports detected
[87029.642603] xhci_hcd 0000:05:00.0: xHCI Host Controller
[87029.642609] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[87029.642614] xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed
[87029.645065] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[87029.645093] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[87029.645095] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[87029.645097] usb usb4: Product: xHCI Host Controller
[87029.645099] usb usb4: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[87029.645100] usb usb4: SerialNumber: 0000:05:00.0
[87029.645266] hub 4-0:1.0: USB hub found
[87029.645290] hub 4-0:1.0: 2 ports detected
[87030.733888] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[87030.757027] usb 4-2: New USB device found, idVendor=0bc2, idProduct=61b7, bcdDevice= 0.00
[87030.757032] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[87030.757034] usb 4-2: Product: M3 Portable
[87030.757036] usb 4-2: Manufacturer: Seagate
[87030.757038] usb 4-2: SerialNumber: xxx
[87030.763485] scsi host0: uas
[87030.764154] scsi 0:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[87030.764765] sd 0:0:0:0: Attached scsi generic sg0 type 0
[87030.765204] sd 0:0:0:0: [sda] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[87030.765214] sd 0:0:0:0: [sda] 4096-byte physical blocks
[87031.055130] sd 0:0:0:0: [sda] Write Protect is off
[87031.055133] sd 0:0:0:0: [sda] Mode Sense: 4f 00 00 00
[87031.055365] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[87031.875031]  sda: sda1 sda2 sda3
[87031.876462] sd 0:0:0:0: [sda] Attached SCSI disk
[87102.612224] device-mapper: table: 254:3: adding target device sda3 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[87102.612228] device-mapper: table: 254:3: adding target device sda3 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[87102.612303] device-mapper: table: 254:3: adding target device sda3 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[87102.612305] device-mapper: table: 254:3: adding target device sda3 caused an alignment inconsistency: physical_block_size=4096, logical_block_size=512, alignment_offset=0, start=33553920
[87149.759885] sd 0:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN 
[87149.759906] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 01 8f 01 02 1f 00 00 00 e0 00 00
[87149.759921] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[87149.759961] xhci_hcd 0000:05:00.0: HC died; cleaning up
[87149.760001] usb 4-2: USB disconnect, device number 2
[87149.766542] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[87149.773560] sd 0:0:0:0: Device offlined - not ready after error recovery
[87149.789918] sd 0:0:0:0: [sda] tag#0 FAILED Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[87149.789923] sd 0:0:0:0: [sda] tag#0 CDB: Read(16) 88 00 00 00 00 01 8f 01 02 1f 00 00 00 e0 00 00
[87149.789926] print_req_error: I/O error, dev sda, sector 6694175263
[87150.003172] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[87150.039945] xhci_hcd 0000:05:00.0: WARN Can't disable streams for endpoint 0x81, streams are being disabled already

[87295.984514] usb 1-1-port1: disabled by hub (EMI?), re-enabling...
[87295.984531] usb 1-1.1: USB disconnect, device number 7
[87296.214998] usb 1-1.1: new low-speed USB device number 8 using ehci-pci
[87296.323894] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c404, bcdDevice= 2.20
[87296.323903] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[87296.323908] usb 1-1.1: Product: Trackball
[87296.323912] usb 1-1.1: Manufacturer: Logitech
[87296.329825] input: Logitech Trackball as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C404.0002/input/input22
[87296.385300] hid-generic 0003:046D:C404.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1a.0-1.1/input0
[87308.947480] audit: type=1130 audit(1541946356.061:222): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[87308.947484] audit: type=1131 audit(1541946356.061:223): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[87318.937812] xhci_hcd 0000:05:00.0: remove, state 1
[87318.937821] usb usb4: USB disconnect, device number 1
[87318.938083] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[87318.938092] xhci_hcd 0000:05:00.0: remove, state 4
[87318.938096] usb usb3: USB disconnect, device number 1
[87318.938280] xhci_hcd 0000:05:00.0: Host halt failed, -19
[87318.938283] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[87318.938529] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[87319.871102] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[87319.871211] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[87319.871507] pci 0000:05:00.0: PME# supported from D0 D3hot
[87319.871787] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[87319.871831] pci 0000:05:00.0: enabling device (0000 -> 0002)
[87319.872371] xhci_hcd 0000:05:00.0: xHCI Host Controller
[87319.872380] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[87319.872566] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[87319.873525] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[87319.873530] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[87319.873532] usb usb3: Product: xHCI Host Controller
[87319.873534] usb usb3: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[87319.873535] usb usb3: SerialNumber: 0000:05:00.0
[87319.873780] hub 3-0:1.0: USB hub found
[87319.873799] hub 3-0:1.0: 2 ports detected
[87319.874001] xhci_hcd 0000:05:00.0: xHCI Host Controller
[87319.874008] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[87319.874013] xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed
[87319.875930] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[87319.875972] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[87319.875975] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[87319.875977] usb usb4: Product: xHCI Host Controller
[87319.875980] usb usb4: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[87319.875982] usb usb4: SerialNumber: 0000:05:00.0
[87319.876163] hub 4-0:1.0: USB hub found
[87319.876186] hub 4-0:1.0: 2 ports detected
[87320.954289] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[87320.993602] usb 4-2: unable to get BOS descriptor set
[87320.994533] usb 4-2: unable to read config index 0 descriptor/start: -71
[87320.994539] usb 4-2: can't read configurations, error -71
[87321.184338] usb 4-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
[87321.219333] usb 4-2: device descriptor read/all, error -71
[87321.219457] usb usb4-port2: attempt power cycle
[87325.607369] usb usb4-port2: Cannot enable. Maybe the USB cable is bad?
[87326.422590] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[87326.422602] xhci_hcd 0000:05:00.0: HC died; cleaning up
[87349.890002] xhci_hcd 0000:05:00.0: remove, state 1
[87349.890013] usb usb4: USB disconnect, device number 1
[87349.890321] xhci_hcd 0000:05:00.0: USB bus 4 deregistered
[87349.890333] xhci_hcd 0000:05:00.0: remove, state 1
[87349.890341] usb usb3: USB disconnect, device number 1
[87349.890606] xhci_hcd 0000:05:00.0: Host halt failed, -19
[87349.890610] xhci_hcd 0000:05:00.0: Host not accessible, reset failed.
[87349.890852] xhci_hcd 0000:05:00.0: USB bus 3 deregistered
[87351.260183] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[87351.260280] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[87351.260616] pci 0000:05:00.0: PME# supported from D0 D3hot
[87351.261028] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[87351.261080] pci 0000:05:00.0: enabling device (0000 -> 0002)
[87351.261860] xhci_hcd 0000:05:00.0: xHCI Host Controller
[87351.261868] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[87351.262039] xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004
[87351.262464] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[87351.262466] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[87351.262469] usb usb3: Product: xHCI Host Controller
[87351.262470] usb usb3: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[87351.262472] usb usb3: SerialNumber: 0000:05:00.0
[87351.262644] hub 3-0:1.0: USB hub found
[87351.262945] hub 3-0:1.0: 2 ports detected
[87351.263184] xhci_hcd 0000:05:00.0: xHCI Host Controller
[87351.263190] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[87351.263195] xhci_hcd 0000:05:00.0: Host supports USB 3.0  SuperSpeed
[87351.265681] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[87351.265717] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[87351.265720] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[87351.265722] usb usb4: Product: xHCI Host Controller
[87351.265724] usb usb4: Manufacturer: Linux 4.18.16-arch1-1-ARCH xhci-hcd
[87351.265726] usb usb4: SerialNumber: 0000:05:00.0
[87351.266010] hub 4-0:1.0: USB hub found
[87351.266033] hub 4-0:1.0: 2 ports detected
[87352.353316] usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[87352.376341] usb 4-2: New USB device found, idVendor=0bc2, idProduct=61b7, bcdDevice= 0.00
[87352.376345] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[87352.376347] usb 4-2: Product: M3 Portable
[87352.376349] usb 4-2: Manufacturer: Seagate
[87352.376351] usb 4-2: SerialNumber: xxx
[87352.384002] scsi host7: uas
[87352.384586] scsi 7:0:0:0: Direct-Access     Seagate  M3 Portable      9300 PQ: 0 ANSI: 6
[87352.385270] sd 7:0:0:0: Attached scsi generic sg0 type 0
[87352.385656] sd 7:0:0:0: [sdd] 7814037167 512-byte logical blocks: (4.00 TB/3.64 TiB)
[87352.673275] sd 7:0:0:0: [sdd] Write Protect is off
[87352.673281] sd 7:0:0:0: [sdd] Mode Sense: 4f 00 00 00
[87352.673655] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[87353.493112]  sdd: sdd1 sdd2 sdd3
[87353.494874] sd 7:0:0:0: [sdd] Attached SCSI disk
[87385.275312] sd 7:0:0:0: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD 
[87385.275317] sd 7:0:0:0: [sdd] tag#0 CDB: Read(16) 88 00 00 00 00 01 0e ff ff f8 00 00 00 08 00 00
[87385.288644] scsi host7: uas_eh_device_reset_handler start
[87390.378469] xhci_hcd 0000:05:00.0: xHCI host not responding to stop endpoint command.
[87390.378482] xhci_hcd 0000:05:00.0: xHCI host controller not responding, assume dead
[87390.378518] xhci_hcd 0000:05:00.0: HC died; cleaning up
[87390.378538] usb 4-2: USB disconnect, device number 2
[87390.388931] sd 7:0:0:0: [sdd] Synchronizing SCSI cache
[87432.707285] xhci_hcd 0000:05:00.0: remove, state 1
[87432.707302] usb usb4: USB disconnect, device number 1
[87523.577281] wlp3s0: deauthenticating from a0:f3:c1:77:fa:82 by local choice (Reason: 3=DEAUTH_LEAVING)
[87523.674524] audit: type=1130 audit(1541946570.795:224): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[87524.840553] audit: type=1131 audit(1541946571.962:225): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=atop comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[87524.842962] PM: suspend entry (deep)
[87524.842965] PM: Syncing filesystems ... done.
[87524.874997] Freezing user space processes ... 
[87525.163574] e1000e: enp0s25 NIC Link is Down
[87544.879046] Freezing of tasks failed after 20.004 seconds (1 tasks refusing to freeze, wq_busy=0):
[87544.879483] systemd-udevd   D    0 12617   1174 0x000001a4
[87544.879491] Call Trace:
[87544.879512]  ? __schedule+0x29b/0x8b0
[87544.879520]  schedule+0x32/0x90
[87544.879530]  io_schedule+0x12/0x40
[87544.879541]  wait_on_page_bit_killable+0xea/0x150
[87544.879549]  ? add_to_page_cache_lru+0xe0/0xe0
[87544.879556]  generic_file_read_iter+0x204/0x9b0
[87544.879568]  __vfs_read+0x13a/0x180
[87544.879577]  vfs_read+0x8a/0x130
[87544.879584]  ksys_read+0x4f/0xb0
[87544.879593]  do_syscall_64+0x5b/0x170
[87544.879603]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[87544.879609] RIP: 0033:0x7f4967f0e152
[87544.879611] Code: Bad RIP value.
[87544.879626] RSP: 002b:00007ffc754697c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[87544.879632] RAX: ffffffffffffffda RBX: 0000564743a91c80 RCX: 00007f4967f0e152
[87544.879635] RDX: 0000000000000200 RSI: 0000564743abf798 RDI: 000000000000000f
[87544.879638] RBP: 0000564743a91cd0 R08: 0000564743abf770 R09: 00007f4967ef7c20
[87544.879640] R10: 0000564743a91010 R11: 0000000000000246 R12: 000001fffffffe00
[87544.879643] R13: 0000000000000200 R14: 0000564743abf788 R15: 0000564743abf770
[87544.879660] OOM killer enabled.
[87544.879661] Restarting tasks ... done.
[87544.913448] video LNXVIDEO:00: Restoring backlight state
[87544.914168] PM: suspend exit
[87544.914230] PM: suspend entry (s2idle)
[87544.914231] PM: Syncing filesystems ... 
[87545.436818] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[87548.685002] audit: type=1131 audit(1541946595.809:226): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[87561.080508] traps: xfsm-shutdown-h[16126] general protection ip:7fcdd3472f41 sp:7ffcda464de0 error:0 in libc-2.28.so[7fcdd340f000+14b000]
[87561.080544] audit: type=1701 audit(1541946608.206:227): auid=1001 uid=0 gid=0 ses=2 pid=16126 comm="xfsm-shutdown-h" exe="/usr/lib/xfce4/session/xfsm-shutdown-helper" sig=11 res=1
[87561.093445] audit: type=1130 audit(1541946608.219:228): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-16132-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[87561.594053] audit: type=1131 audit(1541946608.719:229): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@1-16132-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[87608.824562] INFO: task kworker/3:3:25959 blocked for more than 120 seconds.
[87608.824571]       Tainted: P     U     OE     4.18.16-arch1-1-ARCH #1
[87608.824574] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[87608.824578] kworker/3:3     D    0 25959      2 0x80000080
[87608.824591] Workqueue: usb_hub_wq hub_event
[87608.824594] Call Trace:
[87608.824607]  ? __schedule+0x29b/0x8b0
[87608.824612]  schedule+0x32/0x90
[87608.824617]  schedule_preempt_disabled+0x14/0x20
[87608.824621]  __mutex_lock.isra.0+0x220/0x530
[87608.824627]  ? _dev_info+0x6c/0x90
[87608.824633]  usb_disconnect+0x52/0x2a0
[87608.824639]  ? rpm_idle+0x20/0x2c0
[87608.824644]  hub_quiesce+0x43/0x90
[87608.824649]  hub_event+0x7b8/0x15b0
[87608.824658]  ? netdev_run_todo+0x61/0x280
[87608.824664]  ? preempt_count_add+0x68/0xa0
[87608.824669]  ? _raw_spin_lock_irqsave+0x25/0x50
[87608.824676]  process_one_work+0x1eb/0x3c0
[87608.824681]  worker_thread+0x2d/0x3d0
[87608.824685]  ? process_one_work+0x3c0/0x3c0
[87608.824691]  kthread+0x112/0x130
[87608.824695]  ? kthread_flush_work_fn+0x10/0x10
[87608.824700]  ret_from_fork+0x35/0x40
[87608.824709] INFO: task kworker/u16:62:722 blocked for more than 120 seconds.
[87608.824713]       Tainted: P     U     OE     4.18.16-arch1-1-ARCH #1
[87608.824716] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[87608.824719] kworker/u16:62  D    0   722      2 0x80000080
[87608.824728] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[87608.824730] Call Trace:
[87608.824736]  ? __schedule+0x29b/0x8b0
[87608.824741]  schedule+0x32/0x90
[87608.824745]  schedule_preempt_disabled+0x14/0x20
[87608.824748]  __mutex_lock.isra.0+0x220/0x530
[87608.824755]  usb_disconnect+0x52/0x2a0
[87608.824760]  usb_remove_hcd+0xba/0x1d0
[87608.824766]  xhci_pci_remove+0x3c/0x80
[87608.824774]  pci_device_remove+0x3b/0xc0
[87608.824781]  device_release_driver_internal+0x180/0x250
[87608.824788]  pci_stop_bus_device+0x81/0xa0
[87608.824792]  pci_stop_and_remove_bus_device+0xe/0x20
[87608.824798]  disable_slot+0x49/0x90
[87608.824803]  acpiphp_check_bridge.part.4+0xba/0x150
[87608.824809]  acpiphp_hotplug_notify+0xf0/0x1d0
[87608.824813]  ? acpiphp_post_dock_fixup+0xc0/0xc0
[87608.824819]  acpi_device_hotplug+0x9c/0x4b0
[87608.824824]  acpi_hotplug_work_fn+0x1a/0x30
[87608.824828]  process_one_work+0x1eb/0x3c0
[87608.824832]  worker_thread+0x2d/0x3d0
[87608.824836]  ? process_one_work+0x3c0/0x3c0
[87608.824840]  kthread+0x112/0x130
[87608.824844]  ? kthread_flush_work_fn+0x10/0x10
[87608.824849]  ret_from_fork+0x35/0x40
[87642.473970] traps: xfsm-shutdown-h[17544] general protection ip:7f68476edf41 sp:7fffbe5d1db0 error:0 in libc-2.28.so[7f684768a000+14b000]
[87642.474011] audit: type=1701 audit(1541946689.602:230): auid=1001 uid=0 gid=0 ses=2 pid=17544 comm="xfsm-shutdown-h" exe="/usr/lib/xfce4/session/xfsm-shutdown-helper" sig=11 res=1
[87642.486874] audit: type=1130 audit(1541946689.616:231): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@2-17548-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[87643.024509] audit: type=1131 audit(1541946690.152:232): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-coredump@2-17548-0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

Last edited by whitesnow (2018-11-11 14:43:09)

Offline

#42 2019-04-08 17:33:17

whitesnow
Member
Registered: 2015-01-04
Posts: 51

Re: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)

Just as an update,

it works, when
ExpressCard PowerManagement is disabled in the BIOS.

https://thinkpad-forum.de/threads/19226 … ch-Standby

He wrote, the the card disappeared after suspend, and disabling PowerManagement for ExpressCard did help there.

So for me, now the card is working, with disabled PowerMangement for ExpressCard in the Bios.

here:
https://www.reddit.com/r/thinkpad/comme … _problems/

it says similar.

Offline

Board footer

Powered by FluxBB