[SOLVED]Kernel Panic Requested init failed

seth · 2018-07-27 18:24:14

I can't tell you anything from your paraphrases on dmesg, but I can tell you that dmesg will tell you whether the firmware is loaded or not, compare eg.

[    4.303809] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43340-sdio.clm_blob failed with error -2
[    4.303814] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[    4.304196] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43340/2 wl0: Oct 23 2017 08:41:23 version 6.10.190.70 (r674464) FWID 01-98d71006

from your previous post…

loqs · 2018-07-27 18:35:39

On the dmesg from the kernel supplied by the linux package is the trace_printk warning absent?

Swayland · 2018-07-28 03:22:44

@seth
If the brcmfmac driver was loaded incorrectly, how come I am still able to see active network connections? I did what was told on the arch wiki asus x205ta page in order to get internet connection.

@loqs
Is this what you mean?

[    1.990673] **********************************************************
[    1.990674] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    1.990675] **                                                      **
[    1.990677] ** trace_printk() being used. Allocating extra memory.  **
[    1.990678] **                                                      **
[    1.990679] ** This means that this is a DEBUG kernel and it is     **
[    1.990680] ** unsafe for production use.                           **
[    1.990681] **                                                      **
[    1.990682] ** If you see this message and you are not debugging    **
[    1.990683] ** the kernel, report this immediately to your vendor!  **
[    1.990684] **                                                      **
[    1.990685] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    1.990686] **********************************************************

seth · 2018-07-28 06:16:32

Because we do not know whether your connection issues are related to the failing firmware load or because your network setup is garbeld in any other way (likely unrelated to the initial question), hence my question…

loqs · 2018-07-28 08:49:35

@swayland yes
Edit:
Is that output from the kernel provided by the linux package?

Last edited by loqs (2018-07-28 08:51:52)

Swayland · 2018-07-28 16:49:55

@seth and loqs

The previous dmesg is when I use the linux-x205ta kernel. When I switch back to the default kernel, this problem seems to go away... I am actually connected to wifi when I use the linux package. Strange... This is the dmesg of the linux package:

 
[    0.000000] Linux version 4.17.9-1-ARCH (builduser@heftig-26261) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Sun Jul 22 20:23:36 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mmcblk1p1 rw quiet intel_idle.max_cstate=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007bf0afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bf0b000-0x000000007bf3afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bf3b000-0x000000007bf6efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007bf6f000-0x000000007c037fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007c038000-0x000000007c91ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c920000-0x000000007c97bfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007c97c000-0x000000007c983fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c984000-0x000000007c984fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c985000-0x000000007cbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0x7bf6e000  ACPI 2.0=0x7bf6e014  ESRT=0x7bf3a000  SMBIOS=0x7c984190 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X205TA/X205TA, BIOS X205TA.205 10/06/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7cc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07E000000 mask FFE000000 uncachable
[    0.000000]   2 base 07D000000 mask FFF000000 uncachable
[    0.000000]   3 base 07CE00000 mask FFFE00000 uncachable
[    0.000000]   4 base 07CE00000 mask FFFE00000 uncachable
[    0.000000]   5 base 07CD00000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 1997M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 5  	lose cover RAM: 0G
[    0.000000] esrt: ESRT header is not in the memory map.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 44000 size 24576
[    0.000000] BRK [0x41660000, 0x41660fff] PGTABLE
[    0.000000] BRK [0x41661000, 0x41661fff] PGTABLE
[    0.000000] BRK [0x41662000, 0x41662fff] PGTABLE
[    0.000000] BRK [0x41663000, 0x41663fff] PGTABLE
[    0.000000] BRK [0x41664000, 0x41664fff] PGTABLE
[    0.000000] BRK [0x41665000, 0x41665fff] PGTABLE
[    0.000000] BRK [0x41666000, 0x41666fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x36f4b000-0x3779cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007BF6E014 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x000000007BF6D0F8 0000D4 (v01 _ASUS_ Notebook 00000003 MSFT 0100000D)
[    0.000000] ACPI: FACP 0x000000007BF69000 00010C (v05 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: DSDT 0x000000007BF52000 0126F4 (v02 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: TCPA 0x000000007BF6C000 000032 (v02                 00000000      00000000)
[    0.000000] ACPI: UEFI 0x000000007BFEB000 000042 (v01 _ASUS_ Notebook 00000000      00000000)
[    0.000000] ACPI: OEM0 0x000000007BF6B000 000084 (v05 _ASUS_ BATTERY  00000003 AMI  0100000D)
[    0.000000] ACPI: DBG2 0x000000007BF6A000 000072 (v00 _ASUS_ INTLDBG2 00000003 AMI  0100000D)
[    0.000000] ACPI: HPET 0x000000007BF68000 000038 (v01 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: LPIT 0x000000007BF67000 000104 (v01 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: APIC 0x000000007BF66000 00006C (v03 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: MCFG 0x000000007BF65000 00003C (v01 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BF51000 000603 (v01 _ASUS_ CpuDptf  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BF4F000 001BE2 (v01 _ASUS_ DptfTab  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BF4E000 000058 (v01 _ASUS_ LowPwrM  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BF4D000 0000FF (v01 _ASUS_ SoCDptf  00000003 AMI  0100000D)
[    0.000000] ACPI: FPDT 0x000000007BF4C000 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007BF4B000 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BF4A000 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BF49000 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BF48000 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[    0.000000] ACPI: TPM2 0x000000007BF47000 000034 (v03                 00000000      00000000)
[    0.000000] ACPI: BGRT 0x000000007BF46000 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: CSRT 0x000000007BF45000 00014C (v00 _ASUS_ Notebook 00000005 INTL 20120624)
[    0.000000] ACPI: MSDM 0x000000007BF39F90 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007cbfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7bd06000-0x7bd09fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007cbfffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000007bf0afff]
[    0.000000]   node   0: [mem 0x000000007c97c000-0x000000007c983fff]
[    0.000000]   node   0: [mem 0x000000007c985000-0x000000007cbfffff]
[    0.000000] Reserved but unavailable: 16598 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007cbfffff]
[    0.000000] On node 0 totalpages: 507690
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 104 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7920 pages used for memmap
[    0.000000]   DMA32 zone: 503694 pages, LIFO batch:31
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics memory at [mem 0x7cf00000-0x7eefffff]
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bf0b000-0x7bf3afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bf3b000-0x7bf6efff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bf6f000-0x7c037fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c038000-0x7c91ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c920000-0x7c97bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c984000-0x7c984fff]
[    0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x535 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 499602
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mmcblk1p1 rw quiet intel_idle.max_cstate=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1909620K/2030760K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 121140K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 32655 entries in 128 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 1024, preallocated irqs: 0
[    0.000000] 	Offload RCU callbacks from CPUs: (none).
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] tsc: Detected 1332.800 MHz processor
[    0.000024] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.66 BogoMIPS (lpj=4442666)
[    0.000038] pid_max: default: 32768 minimum: 301
[    0.001638] Security Framework initialized
[    0.001643] Yama: becoming mindful.
[    0.002553] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003049] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.003120] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003141] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.003333] CPU: Physical Processor ID: 0
[    0.003333] CPU: Processor Core ID: 0
[    0.003333] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.003333] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003333] mce: CPU supports 6 MCE banks
[    0.003333] CPU0: Thermal monitoring enabled (TM1)
[    0.003333] process: using mwait in idle threads
[    0.003333] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.003333] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.003333] Spectre V2 : Mitigation: Full generic retpoline
[    0.003333] Freeing SMP alternatives memory: 28K
[    0.003333] TSC deadline timer enabled
[    0.003333] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.016695] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.016725] ... version:                3
[    0.016727] ... bit width:              40
[    0.016730] ... generic registers:      2
[    0.016732] ... value mask:             000000ffffffffff
[    0.016735] ... max period:             0000007fffffffff
[    0.016737] ... fixed-purpose events:   3
[    0.016739] ... event mask:             0000000700000003
[    0.020024] Hierarchical SRCU implementation.
[    0.030389] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.033380] smp: Bringing up secondary CPUs ...
[    0.056719] x86: Booting SMP configuration:
[    0.056724] .... node  #0, CPUs:      #1 #2 #3
[    0.104676] smp: Brought up 1 node, 4 CPUs
[    0.104676] smpboot: Max logical packages: 1
[    0.104676] smpboot: Total of 4 processors activated (10666.66 BogoMIPS)
[    0.104676] devtmpfs: initialized
[    0.106729] x86/mm: Memory block size: 128MB
[    0.107505] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.107505] PM: Registering ACPI NVS region [mem 0x7bf6f000-0x7c037fff] (823296 bytes)
[    0.107505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.107505] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.107505] pinctrl core: initialized pinctrl subsystem
[    0.107505] RTC time: 16:43:15, date: 07/28/18
[    0.107505] NET: Registered protocol family 16
[    0.107926] cpuidle: using governor ladder
[    0.107926] cpuidle: using governor menu
[    0.107926] ACPI: bus type PCI registered
[    0.107926] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.107926] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.107926] PCI: not using MMCONFIG
[    0.107926] PCI: Using configuration type 1 for base access
[    0.113445] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.113701] ACPI: Added _OSI(Module Device)
[    0.113705] ACPI: Added _OSI(Processor Device)
[    0.113708] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.113711] ACPI: Added _OSI(Processor Aggregator Device)
[    0.113714] ACPI: Added _OSI(Linux-Dell-Video)
[    0.172937] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.198095] ACPI: Dynamic OEM Table Load:
[    0.198119] ACPI: SSDT 0xFFFF99E6751C1800 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.200064] ACPI: Dynamic OEM Table Load:
[    0.200084] ACPI: SSDT 0xFFFF99E6751C4000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.202706] ACPI: Dynamic OEM Table Load:
[    0.202724] ACPI: SSDT 0xFFFF99E675377400 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.203872] ACPI: Dynamic OEM Table Load:
[    0.203890] ACPI: SSDT 0xFFFF99E6753B9F00 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.210935] ACPI: Interpreter enabled
[    0.210996] ACPI: (supports S0 S5)
[    0.211000] ACPI: Using IOAPIC for interrupt routing
[    0.211126] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.229769] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[    0.229775] PCI: not using MMCONFIG
[    0.229786] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.239205] ACPI: Power Resource [USBC] (on)
[    0.251451] ACPI: Power Resource [PLPE] (on)
[    0.261944]  (null): Device [PWM1] is in always present list
[    0.269328] ACPI: Power Resource [CLK0] (on)
[    0.269498] ACPI: Power Resource [CLK1] (on)
[    0.270627] ACPI: Power Resource [P28T] (off)
[    0.270809] ACPI: Power Resource [P18T] (off)
[    0.278050] ACPI: Power Resource [P28X] (off)
[    0.278226] ACPI: Power Resource [P18X] (off)
[    0.278407] ACPI: Power Resource [P28P] (off)
[    0.278587] ACPI: Power Resource [P18P] (off)
[    0.278779] ACPI: Power Resource [P1XT] (off)
[    0.281318] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.291341] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.291359] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.291597] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.291650] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.293422] PCI host bridge to bus 0000:00
[    0.293429] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.293435] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.293439] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.293444] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.293448] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.293453] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.293457] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.293462] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[    0.293466] pci_bus 0000:00: root bus resource [mem 0x7cf00001-0x7ef00000 window]
[    0.293470] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[    0.293475] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.293480] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.293498] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.293857] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.293879] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.293894] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.293909] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.293941] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.294291] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.294322] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[    0.294336] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[    0.294440] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.294767] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
[    0.294804] pci 0000:00:1d.0: reg 0x10: [mem 0x9080d000-0x9080d3ff]
[    0.294939] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.295268] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.297109] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.297475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.297839] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.298204] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.298570] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.298934] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299298] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299662] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.304273] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.340043] dw_dmac INTL9C60:00: Missing DT data
[    0.357061] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    0.373365] dw_dmac INTL9C60:01: Missing DT data
[    0.390405] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    0.390958] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.390958] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.390958] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.390958] vgaarb: loaded
[    0.503342] random: fast init done
[    0.602055] pps_core: LinuxPPS API ver. 1 registered
[    0.602058] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.602069] PTP clock support registered
[    0.602090] EDAC MC: Ver: 3.0.0
[    0.603390] Registered efivars operations
[    0.606760] PCI: Using ACPI for IRQ routing
[    0.606766] PCI: pci_cache_line_size set to 64 bytes
[    0.606794] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.606800] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.606805] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.606808] e820: reserve RAM buffer [mem 0x7bf0b000-0x7bffffff]
[    0.606812] e820: reserve RAM buffer [mem 0x7c984000-0x7fffffff]
[    0.606817] e820: reserve RAM buffer [mem 0x7cc00000-0x7fffffff]
[    0.607086] NetLabel: Initializing
[    0.607089] NetLabel:  domain hash size = 128
[    0.607091] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.607136] NetLabel:  unlabeled traffic allowed by default
[    0.607898] clocksource: Switched to clocksource tsc-early
[    0.647244] VFS: Disk quotas dquot_6.6.0
[    0.647290] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.647519] pnp: PnP ACPI init
[    0.647699] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.648480] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.648488] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.648493] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.648498] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.648504] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.648521] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.648950] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.651819] system 00:03: [io  0x0240-0x0259] has been reserved
[    0.651836] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.662886] pnp: PnP ACPI: found 4 devices
[    0.668490] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.668497] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.668501] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.668506] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.668511] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.668516] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.668520] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.668525] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[    0.668530] pci_bus 0000:00: resource 12 [mem 0x7cf00001-0x7ef00000 window]
[    0.668534] pci_bus 0000:00: resource 13 [mem 0x80000000-0x908ffffe window]
[    0.668539] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[    0.668840] NET: Registered protocol family 2
[    0.669239] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.669281] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.669388] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.669504] TCP: Hash tables configured (established 16384 bind 16384)
[    0.669595] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.669633] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.669752] NET: Registered protocol family 1
[    0.669796] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.670378] PCI: CLS 0 bytes, default 64
[    0.670508] Unpacking initramfs...
[    0.944555] Freeing initrd memory: 8520K
[    0.944668] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    0.944718] clocksource: Switched to clocksource tsc
[    0.944960] Scanning for low memory corruption every 60 seconds
[    0.946508] Initialise system trusted keyrings
[    0.946533] Key type blacklist registered
[    0.946717] workingset: timestamp_bits=41 max_order=19 bucket_order=0
[    0.950799] zbud: loaded
[    0.951530] pstore: using lz4hc compression
[    0.956189] Key type asymmetric registered
[    0.956194] Asymmetric key parser 'x509' registered
[    0.956346] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.956466] io scheduler noop registered
[    0.956469] io scheduler deadline registered
[    0.956609] io scheduler cfq registered (default)
[    0.956613] io scheduler mq-deadline registered
[    0.956616] io scheduler kyber registered
[    0.956636] io scheduler bfq registered
[    0.957505] efifb: probing for efifb
[    0.957538] efifb: framebuffer at 0x80000000, using 4160k, total 4160k
[    0.957542] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.957544] efifb: scrolling: redraw
[    0.957548] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.967850] Console: switching to colour frame buffer device 170x48
[    0.977789] fb0: EFI VGA frame buffer device
[    0.977820] intel_idle: MWAIT substates: 0x33000020
[    0.977824] intel_idle: v0.4.1 model 0x37
[    0.977833] intel_idle: max_cstate 1 reached
[    0.978109] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.978310] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.978331] ACPI: Lid Switch [LID]
[    0.978452] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.978474] ACPI: Power Button [PWRB]
[    0.978584] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.978611] ACPI: Sleep Button [SLPB]
[    0.989118] [Firmware Bug]: No valid trip found
[    0.989739] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.010163] 00:02: ttyS0 at I/O 0x3f8 (irq = 27, base_baud = 115200) is a 16550A
[    1.011410] hpet: number irqs doesn't agree with number of timers
[    1.013208] intel_pstate: Intel P-state driver initializing
[    1.013721] ledtrig-cpu: registered to indicate activity on CPUs
[    1.016062] NET: Registered protocol family 10
[    1.037021] Segment Routing with IPv6
[    1.037089] NET: Registered protocol family 17
[    1.038155] RAS: Correctable Errors collector initialized.
[    1.038279] microcode: sig=0x30678, pf=0x2, revision=0x829
[    1.038466] microcode: Microcode Update Driver: v2.2.
[    1.038518] sched_clock: Marking stable (1038443977, 0)->(1054609556, -16165579)
[    1.039187] registered taskstats version 1
[    1.039223] Loading compiled-in X.509 certificates
[    1.039290] zswap: loaded using pool lzo/zbud
[    1.051654] Key type big_key registered
[    1.083971] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[    1.106882]   Magic number: 10:492:743
[    1.107064] hctosys: unable to open rtc device (rtc0)
[    1.139145] Freeing unused kernel memory: 1476K
[    1.139154] Write protecting the kernel read-only data: 16384k
[    1.140657] Freeing unused kernel memory: 2016K
[    1.144602] Freeing unused kernel memory: 608K
[    1.451746] sdhci: Secure Digital Host Controller Interface driver
[    1.451749] sdhci: Copyright(c) Pierre Ossman
[    1.456166] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    1.471211] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    1.472749] mmc2: SDHCI controller on ACPI [PNP0FFF:00] using ADMA
[    1.482955] ACPI: bus type USB registered
[    1.483022] usbcore: registered new interface driver usbfs
[    1.483050] usbcore: registered new interface driver hub
[    1.483126] usbcore: registered new device driver usb
[    1.485429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.485928] ehci-pci: EHCI PCI platform driver
[    1.486279] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.486376] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.486399] ehci-pci 0000:00:1d.0: debug port 2
[    1.490343] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.490385] ehci-pci 0000:00:1d.0: irq 30, io mem 0x9080d000
[    1.503504] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.503673] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[    1.503679] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.503684] usb usb1: Product: EHCI Host Controller
[    1.503688] usb usb1: Manufacturer: Linux 4.17.9-1-ARCH ehci_hcd
[    1.503691] usb usb1: SerialNumber: 0000:00:1d.0
[    1.504499] hub 1-0:1.0: USB hub found
[    1.504527] hub 1-0:1.0: 8 ports detected
[    1.518004] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.519522] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.521084] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.523862] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.583529] mmc0: new ultra high speed DDR50 SDIO card at address 0001
[    1.601253] mmc1: new HS200 MMC card at address 0001
[    1.601928] mmcblk1: mmc1:0001 HBG4e 29.1 GiB 
[    1.602596] mmcblk1boot0: mmc1:0001 HBG4e partition 1 4.00 MiB
[    1.603137] mmcblk1boot1: mmc1:0001 HBG4e partition 2 4.00 MiB
[    1.603320] mmcblk1rpmb: mmc1:0001 HBG4e partition 3 4.00 MiB, chardev (243:0)
[    1.606800]  mmcblk1: p1 p2 p3
[    1.631519] mmc2: new high speed SDHC card at address aaaa
[    1.632313] mmcblk2: mmc2:aaaa SL32G 29.7 GiB 
[    1.657735]  mmcblk2: p1
[    1.833368] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.980420] usb 1-1: New USB device found, idVendor=8087, idProduct=07e6, bcdDevice= 0.15
[    1.980429] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.981022] hub 1-1:1.0: USB hub found
[    1.981154] hub 1-1:1.0: 4 ports detected
[    2.260046] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.378580] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=57b5, bcdDevice= 0.12
[    2.378589] usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.378596] usb 1-1.1: Product: USB Camera
[    2.378601] usb 1-1.1: Manufacturer: 04081-00092400E96NG8
[    2.378607] usb 1-1.1: SerialNumber: 200901010001
[    2.456697] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    2.555007] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[    2.555011] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.555015] usb 1-1.2: Product: USB2.0 Hub
[    2.555577] hub 1-1.2:1.0: USB hub found
[    2.556003] hub 1-1.2:1.0: 4 ports detected
[    2.836693] usb 1-1.2.1: new high-speed USB device number 5 using ehci-pci
[    2.933788] usb 1-1.2.1: New USB device found, idVendor=0409, idProduct=0059, bcdDevice= 1.00
[    2.933794] usb 1-1.2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.934243] hub 1-1.2.1:1.0: USB hub found
[    2.934415] hub 1-1.2.1:1.0: 4 ports detected
[    3.006717] usb 1-1.2.2: new full-speed USB device number 6 using ehci-pci
[    3.106478] usb 1-1.2.2: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=15.00
[    3.106484] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.106487] usb 1-1.2.2: Product: USB Receiver
[    3.106490] usb 1-1.2.2: Manufacturer: Logitech
[    3.118316] hidraw: raw HID events driver (C) Jiri Kosina
[    3.124809] usbcore: registered new interface driver usbhid
[    3.124813] usbhid: USB HID core driver
[    3.127853] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C52E.0001/input/input3
[    3.183602] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.2.2/input0
[    3.184551] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/0003:046D:C52E.0002/input/input4
[    3.230035] usb 1-1.2.1.1: new high-speed USB device number 7 using ehci-pci
[    3.240436] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2.2/input1
[    3.327065] usb 1-1.2.1.1: New USB device found, idVendor=0409, idProduct=0059, bcdDevice= 1.00
[    3.327071] usb 1-1.2.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.327513] hub 1-1.2.1.1:1.0: USB hub found
[    3.327685] hub 1-1.2.1.1:1.0: 4 ports detected
[    3.623364] usb 1-1.2.1.1.1: new high-speed USB device number 8 using ehci-pci
[    3.749988] usb 1-1.2.1.1.1: New USB device found, idVendor=0b95, idProduct=7720, bcdDevice= 0.01
[    3.749995] usb 1-1.2.1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.749998] usb 1-1.2.1.1.1: Product: AX88772 
[    3.750014] usb 1-1.2.1.1.1: Manufacturer: ASIX Elec. Corp.
[    3.750018] usb 1-1.2.1.1.1: SerialNumber: 000001
[    3.843370] usb 1-1.2.1.1.2: new full-speed USB device number 9 using ehci-pci
[    3.958821] usb 1-1.2.1.1.2: New USB device found, idVendor=067b, idProduct=2305, bcdDevice= 2.02
[    3.958828] usb 1-1.2.1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.958833] usb 1-1.2.1.1.2: Product: IEEE-1284 Controller
[    3.958837] usb 1-1.2.1.1.2: Manufacturer: Prolific Technology Inc.
[    4.874765] random: crng init done
[   44.085862] F2FS-fs (mmcblk1p1): Found nat_bits in checkpoint
[   44.365963] F2FS-fs (mmcblk1p1): Mounted with checkpoint version = 57c0f622
[   44.586146] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[   44.600418] systemd[1]: Detected architecture x86-64.
[   44.609093] systemd[1]: Set hostname to <ARCHER>.
[   44.964967] systemd[1]: /etc/systemd/system/netctl@wlan0\x2dscorpion.service:1: .include directives are deprecated, and support for them will be removed in a future version of systemd. Please use drop-in files instead.
[   44.975487] systemd[1]: Created slice system-netctl.slice.
[   44.975736] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   44.976460] systemd[1]: Created slice system-getty.slice.
[   44.977165] systemd[1]: Listening on LVM2 poll daemon socket.
[   44.977746] systemd[1]: Listening on udev Kernel Socket.
[   44.978460] systemd[1]: Listening on Journal Socket.
[   45.179719] systemd-journald[246]: Received request to flush runtime journal from PID 1
[   45.380306] i2c_hid i2c-PDEC3393:00: i2c-PDEC3393:00 supply vdd not found, using dummy regulator
[   45.386879] 80860F0A:00: ttyS1 at MMIO 0x90941000 (irq = 16, base_baud = 2764800) is a 16550A
[   45.387259] serial serial0: tty port ttyS1 registered
[   45.389123] ACPI: AC Adapter [ADP1] (off-line)
[   45.389337] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input5
[   45.390115] elan_i2c i2c-ELAN0100:00: i2c-ELAN0100:00 supply vcc not found, using dummy regulator
[   45.403800] 80860F0A:01: ttyS2 at MMIO 0x90947000 (irq = 17, base_baud = 2764800) is a 16550A
[   45.459973] ACPI: Battery Slot [BATC] (battery present)
[   45.707375] rtc_cmos 00:00: registered as rtc0
[   45.707429] rtc_cmos 00:00: no alarms, 242 bytes nvram
[   45.712770] elan_i2c i2c-ELAN0100:00: Elan Touchpad: Module ID: 0x0026, Firmware: 0x000a, Sample: 0x0001, IAP: 0x0000
[   45.716920] input: Elan Touchpad as /devices/platform/80860F41:03/i2c-3/i2c-ELAN0100:00/input/input6
[   45.753095] Linux agpgart interface v0.103
[   45.837933] media: Linux media interface: v0.10
[   45.884537] Bluetooth: Core ver 2.22
[   45.884690] NET: Registered protocol family 31
[   45.884693] Bluetooth: HCI device and connection manager initialized
[   45.884702] Bluetooth: HCI socket layer initialized
[   45.884708] Bluetooth: L2CAP socket layer initialized
[   45.884727] Bluetooth: SCO socket layer initialized
[   45.905933] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[   45.905940] mei_txe 0000:00:1a.0: PCI INT A: not connected
[   45.920292] rt5645 i2c-10EC5648:00: i2c-10EC5648:00 supply avdd not found, using dummy regulator
[   45.920360] rt5645 i2c-10EC5648:00: i2c-10EC5648:00 supply cpvdd not found, using dummy regulator
[   45.928093] mousedev: PS/2 mouse device common for all mice
[   45.976530] usblp 1-1.2.1.1.2:1.0: usblp1: USB Bidirectional printer dev 9 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
[   45.976614] usbcore: registered new interface driver usblp
[   45.978539] Linux video capture interface: v2.00
[   45.981862] intel_sst_acpi 80860F28:00: Detected Baytrail-CR platform
[   45.982990] intel_sst_acpi 80860F28:00: LPE base: 0x90a00000 size:0x200000
[   45.982995] intel_sst_acpi 80860F28:00: IRAM base: 0x90ac0000
[   45.983027] intel_sst_acpi 80860F28:00: DRAM base: 0x90b00000
[   45.983045] intel_sst_acpi 80860F28:00: SHIM base: 0x90b40000
[   45.983058] intel_sst_acpi 80860F28:00: Mailbox base: 0x90b44000
[   45.983069] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[   45.988942] Bluetooth: HCI UART driver ver 2.3
[   45.988948] Bluetooth: HCI UART protocol H4 registered
[   45.988950] Bluetooth: HCI UART protocol BCSP registered
[   45.988994] Bluetooth: HCI UART protocol LL registered
[   45.988997] Bluetooth: HCI UART protocol ATH3K registered
[   45.988999] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   45.989110] Bluetooth: HCI UART protocol Intel registered
[   45.989275] Bluetooth: HCI UART protocol Broadcom registered
[   45.989278] Bluetooth: HCI UART protocol QCA registered
[   45.989280] Bluetooth: HCI UART protocol AG6XX registered
[   45.989282] Bluetooth: HCI UART protocol Marvell registered
[   45.989431] hci_uart_bcm serial0-0: ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low
[   45.990079] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[   46.051136] Adding 2101224k swap on /dev/mmcblk1p3.  Priority:-2 extents:1 across:2101224k SSFS
[   46.082874] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   46.106004] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b5)
[   46.106915] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   46.116765] uvcvideo 1-1.1:1.0: Entity type for entity Extension 7 was not initialized!
[   46.116772] uvcvideo 1-1.1:1.0: Entity type for entity Processing 2 was not initialized!
[   46.116776] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[   46.116780] uvcvideo 1-1.1:1.0: Entity type for entity Extension 4 was not initialized!
[   46.116983] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[   46.117198] usbcore: registered new interface driver uvcvideo
[   46.117201] USB Video Class driver (1.1.1)
[   46.124602] cryptd: max_cpu_qlen set to 1000
[   46.128239] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   46.128329] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   46.128334] cfg80211: failed to load regulatory.db
[   46.163916] SSE version of gcm_enc/dec engaged.
[   46.184574] Bluetooth: hci0: BCM: chip id 82
[   46.185074] Bluetooth: hci0: BCM: features 0x2f
[   46.186266] Bluetooth: hci0: BCM43341B0
[   46.186275] Bluetooth: hci0: BCM43341B0 (002.001.014) build 0000
[   46.187227] bluetooth hci0: Direct firmware load for brcm/BCM43341B0.hcd failed with error -2
[   46.187236] Bluetooth: hci0: BCM: Patch brcm/BCM43341B0.hcd not found
[   46.288122] asix 1-1.2.1.1.1:1.0 eth0: register 'asix' at usb-0000:00:1d.0-1.2.1.1.1, ASIX AX88772 USB 2.0 Ethernet, 00:50:5b:05:2d:39
[   46.288234] usbcore: registered new interface driver asix
[   46.301310] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[   46.311250] input: chtdc_ti_pwrbtn as /devices/platform/80860F41:04/i2c-4/i2c-INT33F5:00/chtdc_ti_pwrbtn/input/input9
[   46.346792] asus 0018:0B05:8585.0003: Fixing up Asus notebook report descriptor
[   46.349053] input: PDEC3393:00 0B05:8585 as /devices/platform/80860F41:00/i2c-0/i2c-PDEC3393:00/0018:0B05:8585.0003/input/input10
[   46.349637] asus 0018:0B05:8585.0003: input,hidraw2: I2C HID v1.00 Keyboard [PDEC3393:00 0B05:8585] on i2c-PDEC3393:00
[   46.359826] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[   46.365033] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[   46.366597] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[   46.369507] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[   46.376264] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input11
[   46.378984] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input12
[   46.424440] brcmfmac: F1 signature read @0x18000000=0x1602a94c
[   46.433457] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43340-sdio for chip BCM43340/2
[   46.434528] usbcore: registered new interface driver brcmfmac
[   46.440981] FAT-fs (mmcblk1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   46.491594] iTCO_vendor_support: vendor-support=0
[   46.510948] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   46.511098] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
[   46.523617] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   46.537083] i8042: PNP: No PS/2 controller found.
[   46.652824] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43340-sdio for chip BCM43340/2
[   46.653003] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43340-sdio.clm_blob failed with error -2
[   46.653009] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   46.656967] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43340/2 wl0: Oct 23 2017 08:41:23 version 6.10.190.70 (r674464) FWID 01-98d71006
[   46.673515] checking generic (80000000 410000) vs hw (80000000 10000000)
[   46.673520] fb: switching to inteldrmfb from EFI VGA
[   46.673570] Console: switching to colour dummy device 80x25
[   46.673778] [drm] Replacing VGA console driver
[   46.673944] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   46.673946] [drm] Driver supports precise vblank timestamp query.
[   46.675057] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   46.677568] intel-spi intel-spi: w25q64dw (8192 Kbytes)
[   46.683103] cht-bsw-rt5645 cht-bsw-rt5645: BIOS Routing: AIF2 connected
[   46.683109] cht-bsw-rt5645 cht-bsw-rt5645: quirk SSP0_AIF2 enabled
[   46.692763] intel_soc_dts_thermal: request_threaded_irq ret -22
[   46.705698] Creating 1 MTD partitions on "intel-spi":
[   46.705708] 0x000000000000-0x000000800000 : "BIOS"
[   46.728172] cht-bsw-rt5645 cht-bsw-rt5645: snd-soc-dummy-dai <-> media-cpu-dai mapping ok
[   46.728245] cht-bsw-rt5645 cht-bsw-rt5645: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok
[   46.728633] cht-bsw-rt5645 cht-bsw-rt5645: rt5645-aif2 <-> ssp0-port mapping ok
[   46.744334] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[   46.746952] intel_rapl: Found RAPL domain package
[   46.746958] intel_rapl: Found RAPL domain core
[   46.747835] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   46.748859] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[   46.750045] [drm] HDaudio controller not detected, using LPE audio instead
[   46.753556] fbcon: inteldrmfb (fb0) is primary device
[   46.797939] input: chtrt5645 Headset as /devices/platform/80860F28:00/cht-bsw-rt5645/sound/card0/input13
[   47.108822] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   47.889765] Console: switching to colour frame buffer device 170x48
[   47.922673] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   56.894605] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   57.197344] 8021q: 802.1Q VLAN Support v1.8
[   68.228489] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01

That's certainly weird... I'm not sure if everything works on the stock kernel yet, but it looks like it does.

Last edited by Swayland (2018-07-28 16:58:23)

loqs · 2018-07-28 17:42:09

As to the message referenced in post #28 the linux-x205ta config contains CONFIG_F2FS_IO_TRACE=y

seth · 2018-07-28 20:00:30

otoh, the firmware loading error occurs w/ the vanilla kernel as well, so this seems unspecific.
Since the kernel is the most contained package, the wifi problem is probably also unrelated to the original issue w/ the broken links/permissions and an inspection of the network management logs will be required.

Swayland · 2018-07-29 02:01:08

Alright, so I removed the x205ta kernel and reinstalled it. I can connect to wifi networks again. However, trace_printk() is still being used, and the x205ta kernel is eating up my RAM. Here is the dmesg (i think it's the same one, but it may have changed)

@loqs
Do you mean to say that if I boot with the kernel paramter CONFIG_F2FS_IO_TRACE=n, the trace_printk() warning would go away?

[    0.000000] Linux version 4.17.3-1-x205ta (sushi@ARCHER) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Sat Jul 28 17:06:09 PDT 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-x205ta root=/dev/mmcblk1p1 rw quiet intel_idle.max_cstate=1 button.lid_init_state=open
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007bf0afff] usable
[    0.000000] BIOS-e820: [mem 0x000000007bf0b000-0x000000007bf3afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007bf3b000-0x000000007bf6efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007bf6f000-0x000000007c037fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007c038000-0x000000007c91ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c920000-0x000000007c97bfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000007c97c000-0x000000007c983fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007c984000-0x000000007c984fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007c985000-0x000000007cbfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0x7bf6e000  ACPI 2.0=0x7bf6e014  ESRT=0x7bf3a000  SMBIOS=0x7c984190 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. X205TA/X205TA, BIOS X205TA.205 10/06/2014
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7cc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07E000000 mask FFE000000 uncachable
[    0.000000]   2 base 07D000000 mask FFF000000 uncachable
[    0.000000]   3 base 07CE00000 mask FFFE00000 uncachable
[    0.000000]   4 base 07CE00000 mask FFFE00000 uncachable
[    0.000000]   5 base 07CD00000 mask FFFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] esrt: ESRT header is not in the memory map.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 44000 size 24576
[    0.000000] BRK [0x7a92b000, 0x7a92bfff] PGTABLE
[    0.000000] BRK [0x7a92c000, 0x7a92cfff] PGTABLE
[    0.000000] BRK [0x7a92d000, 0x7a92dfff] PGTABLE
[    0.000000] BRK [0x7a92e000, 0x7a92efff] PGTABLE
[    0.000000] BRK [0x7a92f000, 0x7a92ffff] PGTABLE
[    0.000000] BRK [0x7a930000, 0x7a930fff] PGTABLE
[    0.000000] BRK [0x7a931000, 0x7a931fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x37025000-0x37809fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000007BF6E014 000024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 0x000000007BF6D0F8 0000D4 (v01 _ASUS_ Notebook 00000003 MSFT 0100000D)
[    0.000000] ACPI: FACP 0x000000007BF69000 00010C (v05 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: DSDT 0x000000007BF52000 0126F4 (v02 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: TCPA 0x000000007BF6C000 000032 (v02                 00000000      00000000)
[    0.000000] ACPI: UEFI 0x000000007BFEB000 000042 (v01 _ASUS_ Notebook 00000000      00000000)
[    0.000000] ACPI: OEM0 0x000000007BF6B000 000084 (v05 _ASUS_ BATTERY  00000003 AMI  0100000D)
[    0.000000] ACPI: DBG2 0x000000007BF6A000 000072 (v00 _ASUS_ INTLDBG2 00000003 AMI  0100000D)
[    0.000000] ACPI: HPET 0x000000007BF68000 000038 (v01 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: LPIT 0x000000007BF67000 000104 (v01 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: APIC 0x000000007BF66000 00006C (v03 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: MCFG 0x000000007BF65000 00003C (v01 _ASUS_ Notebook 00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BF51000 000603 (v01 _ASUS_ CpuDptf  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BF4F000 001BE2 (v01 _ASUS_ DptfTab  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BF4E000 000058 (v01 _ASUS_ LowPwrM  00000003 AMI  0100000D)
[    0.000000] ACPI: SSDT 0x000000007BF4D000 0000FF (v01 _ASUS_ SoCDptf  00000003 AMI  0100000D)
[    0.000000] ACPI: FPDT 0x000000007BF4C000 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007BF4B000 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BF4A000 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BF49000 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x000000007BF48000 000427 (v01 Intel_ Tpm2Tabl 00001000 INTL 20061109)
[    0.000000] ACPI: TPM2 0x000000007BF47000 000034 (v03                 00000000      00000000)
[    0.000000] ACPI: BGRT 0x000000007BF46000 000038 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.000000] ACPI: CSRT 0x000000007BF45000 00014C (v00 _ASUS_ Notebook 00000005 INTL 20120624)
[    0.000000] ACPI: MSDM 0x000000007BF39F90 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007cbfffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000008efff]
[    0.000000]   node   0: [mem 0x0000000000090000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000007bf0afff]
[    0.000000]   node   0: [mem 0x000000007c97c000-0x000000007c983fff]
[    0.000000]   node   0: [mem 0x000000007c985000-0x000000007cbfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007cbfffff]
[    0.000000] On node 0 totalpages: 507690
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 104 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7920 pages used for memmap
[    0.000000]   DMA32 zone: 503694 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 100 pages
[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
[    0.000000] Reserving Intel graphics memory at [mem 0x7cf00000-0x7eefffff]
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-86
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bf0b000-0x7bf3afff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bf3b000-0x7bf6efff]
[    0.000000] PM: Registered nosave memory: [mem 0x7bf6f000-0x7c037fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c038000-0x7c91ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c920000-0x7c97bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x7c984000-0x7c984fff]
[    0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x9b/0x52c with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 43 pages/cpu @        (ptrval) s136920 r8192 d31016 u524288
[    0.000000] pcpu-alloc: s136920 r8192 d31016 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 499602
[    0.000000] Kernel command line: button.lid_init_state=open systemd.gpt_auto=0 nmi_watchdog=0 BOOT_IMAGE=/vmlinuz-linux-x205ta root=/dev/mmcblk1p1 rw quiet intel_idle.max_cstate=1 button.lid_init_state=open
[    0.000000] ACPI: button: Notify initial lid state as open
[    0.000000] ACPI: button: Notify initial lid state as open
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Memory: 1904184K/2030760K available (12300K kernel code, 1312K rwdata, 2780K rodata, 1416K init, 1280K bss, 126576K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 35963 entries in 141 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 0
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180313
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] tsc: Detected 1332.800 MHz processor
[    0.000023] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 2666.66 BogoMIPS (lpj=4442666)
[    0.000036] pid_max: default: 32768 minimum: 301
[    0.001700] Security Framework initialized
[    0.001704] Yama: becoming mindful.
[    0.001747] AppArmor: AppArmor initialized
[    0.001803] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.001817] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.002289] CPU: Physical Processor ID: 0
[    0.002292] CPU: Processor Core ID: 0
[    0.002302] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002304] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002318] mce: CPU supports 6 MCE banks
[    0.002329] CPU0: Thermal monitoring enabled (TM1)
[    0.002335] process: using mwait in idle threads
[    0.002341] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[    0.002344] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
[    0.002349] Spectre V2 : Mitigation: Full generic retpoline
[    0.002683] Freeing SMP alternatives memory: 28K
[    0.003333] TSC deadline timer enabled
[    0.003333] smpboot: CPU0: Intel(R) Atom(TM) CPU  Z3735F @ 1.33GHz (family: 0x6, model: 0x37, stepping: 0x8)
[    0.016692] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[    0.016720] ... version:                3
[    0.016722] ... bit width:              40
[    0.016724] ... generic registers:      2
[    0.016727] ... value mask:             000000ffffffffff
[    0.016728] ... max period:             0000007fffffffff
[    0.016730] ... fixed-purpose events:   3
[    0.016732] ... event mask:             0000000700000003
[    0.020022] Hierarchical SRCU implementation.
[    0.030033] smp: Bringing up secondary CPUs ...
[    0.050044] x86: Booting SMP configuration:
[    0.050048] .... node  #0, CPUs:      #1 #2 #3
[    0.091489] smp: Brought up 1 node, 4 CPUs
[    0.091489] smpboot: Max logical packages: 1
[    0.091489] smpboot: Total of 4 processors activated (10666.66 BogoMIPS)
[    0.091489] devtmpfs: initialized
[    0.091489] x86/mm: Memory block size: 128MB
[    0.093708] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[    0.093708] PM: Registering ACPI NVS region [mem 0x7bf6f000-0x7c037fff] (823296 bytes)
[    0.093708] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.093708] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.093708] pinctrl core: initialized pinctrl subsystem
[    0.093812] NET: Registered protocol family 16
[    0.094005] audit: initializing netlink subsys (disabled)
[    0.094024] audit: type=2000 audit(1532828899.093:1): state=initialized audit_enabled=0 res=1
[    0.094024] cpuidle: using governor ladder
[    0.094024] cpuidle: using governor menu
[    0.094024] ACPI: bus type PCI registered
[    0.094024] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.094024] PCI: Using configuration type 1 for base access
[    0.099520] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.100093] cryptd: max_cpu_qlen set to 1000
[    0.100233] ACPI: Added _OSI(Module Device)
[    0.100236] ACPI: Added _OSI(Processor Device)
[    0.100239] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.100241] ACPI: Added _OSI(Processor Aggregator Device)
[    0.100244] ACPI: Added _OSI(Linux-Dell-Video)
[    0.160237] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.181146] ACPI: Dynamic OEM Table Load:
[    0.181169] ACPI: SSDT 0xFFFF891DBB357000 000501 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.183117] ACPI: Dynamic OEM Table Load:
[    0.183135] ACPI: SSDT 0xFFFF891DBB355000 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.185768] ACPI: Dynamic OEM Table Load:
[    0.185785] ACPI: SSDT 0xFFFF891DBB37DC00 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.186939] ACPI: Dynamic OEM Table Load:
[    0.186956] ACPI: SSDT 0xFFFF891DBB3BF000 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.193647] ACPI: Interpreter enabled
[    0.193704] ACPI: (supports S0 S5)
[    0.193708] ACPI: Using IOAPIC for interrupt routing
[    0.193827] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.202535] ACPI: Power Resource [USBC] (on)
[    0.213800] ACPI: Power Resource [PLPE] (on)
[    0.223656]  (null): Device [PWM1] is in always present list
[    0.230475] ACPI: Power Resource [CLK0] (on)
[    0.230634] ACPI: Power Resource [CLK1] (on)
[    0.231681] ACPI: Power Resource [P28T] (off)
[    0.231846] ACPI: Power Resource [P18T] (off)
[    0.238530] ACPI: Power Resource [P28X] (off)
[    0.238692] ACPI: Power Resource [P18X] (off)
[    0.238861] ACPI: Power Resource [P28P] (off)
[    0.239021] ACPI: Power Resource [P18P] (off)
[    0.239201] ACPI: Power Resource [P1XT] (off)
[    0.241481] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.250625] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.250642] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.250875] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.252538] PCI host bridge to bus 0000:00
[    0.252545] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    0.252550] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    0.252555] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    0.252559] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.252563] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.252567] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.252571] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[    0.252576] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff window]
[    0.252580] pci_bus 0000:00: root bus resource [mem 0x7cf00001-0x7ef00000 window]
[    0.252584] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window]
[    0.252588] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff window]
[    0.252593] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.252610] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
[    0.252936] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
[    0.252957] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
[    0.252971] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.252985] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x1007]
[    0.253015] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.253333] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
[    0.253369] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff]
[    0.253382] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff]
[    0.253481] pci 0000:00:1a.0: PME# supported from D0 D3hot
[    0.253781] pci 0000:00:1d.0: [8086:0f34] type 00 class 0x0c0320
[    0.253817] pci 0000:00:1d.0: reg 0x10: [mem 0x9080d000-0x9080d3ff]
[    0.253948] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.254240] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
[    0.254589] pci_bus 0000:00: on NUMA node 0
[    0.255954] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.256319] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.256678] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.257033] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.257387] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.257743] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.258100] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.258454] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.261451] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.310318] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[    0.343649] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[    0.344137] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.344137] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.344137] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.344137] vgaarb: loaded
[    0.344137] ACPI: bus type USB registered
[    0.344137] usbcore: registered new interface driver usbfs
[    0.344137] usbcore: registered new interface driver hub
[    0.344137] usbcore: registered new device driver usb
[    0.456675] random: fast init done
[    0.555138] EDAC MC: Ver: 3.0.0
[    0.555320] Registered efivars operations
[    0.560080] Advanced Linux Sound Architecture Driver Initialized.
[    0.560084] PCI: Using ACPI for IRQ routing
[    0.560088] PCI: pci_cache_line_size set to 64 bytes
[    0.560114] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.560120] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[    0.560124] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.560127] e820: reserve RAM buffer [mem 0x7bf0b000-0x7bffffff]
[    0.560130] e820: reserve RAM buffer [mem 0x7c984000-0x7fffffff]
[    0.560134] e820: reserve RAM buffer [mem 0x7cc00000-0x7fffffff]
[    0.560375] NetLabel: Initializing
[    0.560379] NetLabel:  domain hash size = 128
[    0.560380] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.560427] NetLabel:  unlabeled traffic allowed by default
[    0.561508] clocksource: Switched to clocksource tsc-early
[    0.588737] VFS: Disk quotas dquot_6.6.0
[    0.588783] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.589071] AppArmor: AppArmor Filesystem Enabled
[    0.589120] pnp: PnP ACPI init
[    0.589284] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.590025] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.590032] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.590037] system 00:01: [io  0x0500-0x05fe] has been reserved
[    0.590041] system 00:01: [io  0x0600-0x061f] has been reserved
[    0.590047] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.590062] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.590496] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.593265] system 00:03: [io  0x0240-0x0259] has been reserved
[    0.593282] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.604254] pnp: PnP ACPI: found 4 devices
[    0.609019] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    0.609026] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    0.609030] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    0.609035] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.609039] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.609044] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.609048] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    0.609053] pci_bus 0000:00: resource 11 [mem 0x90c00000-0x90ffffff window]
[    0.609057] pci_bus 0000:00: resource 12 [mem 0x7cf00001-0x7ef00000 window]
[    0.609061] pci_bus 0000:00: resource 13 [mem 0x80000000-0x908ffffe window]
[    0.609066] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed40fff window]
[    0.609345] NET: Registered protocol family 2
[    0.609686] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.609707] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.609778] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.609893] TCP: Hash tables configured (established 16384 bind 16384)
[    0.609969] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.609996] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.610142] NET: Registered protocol family 1
[    0.610178] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.610690] PCI: CLS 0 bytes, default 64
[    0.610804] Unpacking initramfs...
[    0.852242] Freeing initrd memory: 8084K
[    0.852418] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x133626f6b26, max_idle_ns: 440795214178 ns
[    0.852464] clocksource: Switched to clocksource tsc
[    0.853618] Scanning for low memory corruption every 60 seconds
[    0.855045] Initialise system trusted keyrings
[    0.855152] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.858818] zbud: loaded
[    0.859498] pstore: using lz4hc compression
[    0.863858] NET: Registered protocol family 38
[    0.863940] Key type asymmetric registered
[    0.863943] Asymmetric key parser 'x509' registered
[    0.864049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.864157] io scheduler noop registered
[    0.864160] io scheduler deadline registered
[    0.864287] io scheduler cfq registered (default)
[    0.864291] io scheduler mq-deadline registered
[    0.864293] io scheduler kyber registered
[    0.864312] io scheduler bfq registered
[    0.864668] efifb: probing for efifb
[    0.864698] efifb: framebuffer at 0x80000000, using 4160k, total 4160k
[    0.864701] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    0.864703] efifb: scrolling: redraw
[    0.864707] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.875357] Console: switching to colour frame buffer device 170x48
[    0.885559] fb0: EFI VGA frame buffer device
[    0.885589] intel_idle: MWAIT substates: 0x33000020
[    0.885592] intel_idle: v0.4.1 model 0x37
[    0.885600] intel_idle: max_cstate 1 reached
[    0.885842] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.894047] ACPI: AC Adapter [ADP1] (off-line)
[    0.894228] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.894251] ACPI: Lid Switch [LID]
[    0.894349] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.894371] ACPI: Power Button [PWRB]
[    0.894466] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.894491] ACPI: Sleep Button [SLPB]
[    0.901074] [Firmware Bug]: No valid trip found
[    0.901611] EINJ: EINJ table not found.
[    0.901614] ERST DBG: ERST support is disabled.
[    0.901919] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.922226] 00:02: ttyS0 at I/O 0x3f8 (irq = 27, base_baud = 115200) is a 16550A
[    0.923406] hpet: number irqs doesn't agree with number of timers
[    0.923487] Linux agpgart interface v0.103
[    0.924311] rtc_cmos 00:00: registered as rtc0
[    0.924356] rtc_cmos 00:00: no alarms, 242 bytes nvram
[    0.924575] intel_pstate: Intel P-state driver initializing
[    0.924874] sdhci: Secure Digital Host Controller Interface driver
[    0.924880] sdhci: Copyright(c) Pierre Ossman
[    0.926633] mmc0: SDHCI controller on ACPI [INT33BB:00] using ADMA
[    0.944713] mmc1: SDHCI controller on ACPI [80860F14:00] using ADMA
[    0.948854] ACPI: Battery Slot [BATC] (battery present)
[    0.949657] mmc2: SDHCI controller on ACPI [PNP0FFF:00] using ADMA
[    0.949774] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.950062] ledtrig-cpu: registered to indicate activity on CPUs
[    0.970513] hidraw: raw HID events driver (C) Jiri Kosina
[    0.970656] usbcore: registered new interface driver usbhid
[    0.970662] usbhid: USB HID core driver
[    0.988596] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    0.990178] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.991748] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    0.994554] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    0.995760] asus 0018:0B05:8585.0001: Fixing up Asus notebook report descriptor
[    0.996765] input: PDEC3393:00 0B05:8585 as /devices/platform/80860F41:00/i2c-0/i2c-PDEC3393:00/0018:0B05:8585.0001/input/input3
[    0.996930] asus 0018:0B05:8585.0001: input,hidraw0: I2C HID v1.00 Keyboard [PDEC3393:00 0B05:8585] on i2c-PDEC3393:00
[    1.055187] mmc0: new ultra high speed DDR50 SDIO card at address 0001
[    1.074915] mmc1: new HS200 MMC card at address 0001
[    1.075992] mmcblk1: mmc1:0001 HBG4e 29.1 GiB 
[    1.076973] mmcblk1boot0: mmc1:0001 HBG4e partition 1 4.00 MiB
[    1.077709] mmcblk1boot1: mmc1:0001 HBG4e partition 2 4.00 MiB
[    1.077905] mmcblk1rpmb: mmc1:0001 HBG4e partition 3 4.00 MiB, chardev (248:0)
[    1.081525]  mmcblk1: p1 p2 p3
[    1.116221] mmc2: new high speed SDHC card at address aaaa
[    1.117177] mmcblk2: mmc2:aaaa SL32G 29.7 GiB 
[    1.147136]  mmcblk2: p1
[    1.262945] elan_i2c i2c-ELAN0100:00: Elan Touchpad: Module ID: 0x0026, Firmware: 0x000a, Sample: 0x0001, IAP: 0x0000
[    1.263554] input: Elan Touchpad as /devices/platform/80860F41:03/i2c-3/i2c-ELAN0100:00/input/input4
[    1.263972] asus_wmi: ASUS WMI generic driver loaded
[    1.264668] asus_wmi: Initialization: 0x1
[    1.265084] asus_wmi: BIOS WMI version: 7.9
[    1.265438] asus_wmi: SFUN value: 0x37
[    1.277206] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input5
[    1.278741] asus_wmi: Number of fans: 1
[    1.287935] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input6
[    1.290029] intel_sst_acpi 80860F28:00: Detected Baytrail-CR platform
[    1.290121] intel_sst_acpi 80860F28:00: LPE base: 0x90a00000 size:0x200000
[    1.290125] intel_sst_acpi 80860F28:00: IRAM base: 0x90ac0000
[    1.290147] intel_sst_acpi 80860F28:00: DRAM base: 0x90b00000
[    1.290156] intel_sst_acpi 80860F28:00: SHIM base: 0x90b40000
[    1.290171] intel_sst_acpi 80860F28:00: Mailbox base: 0x90b44000
[    1.290179] intel_sst_acpi 80860F28:00: DDR base: 0x20000000
[    1.290352] intel_sst_acpi 80860F28:00: Got drv data max stream 25
[    1.290584] intel_sst_acpi 80860F28:00: Direct firmware load for intel/fw_sst_0f28.bin failed with error -2
[    1.290590] intel_sst_acpi 80860F28:00: request fw failed
[    1.307563] xt_time: kernel timezone is -0000
[    1.308435] NET: Registered protocol family 10
[    1.308987] Segment Routing with IPv6
[    1.309446] NET: Registered protocol family 17
[    1.309467] Key type dns_resolver registered
[    1.309963] microcode: sig=0x30678, pf=0x2, revision=0x829
[    1.310092] microcode: Microcode Update Driver: v2.2.
[    1.310123] SSE version of gcm_enc/dec engaged.
[    1.322367] sched_clock: Marking stable (1322347374, 0)->(1335589832, -13242458)
[    1.322919] registered taskstats version 1
[    1.322952] Loading compiled-in X.509 certificates
[    1.323008] zswap: loaded using pool lzo/zbud
[    1.323221] AppArmor: AppArmor sha1 policy hashing enabled
[    1.364212] i2c_designware 80860F41:04: I2C bus managed by PUNIT
[    1.382204] rtc_cmos 00:00: setting system clock to 2018-07-29 01:48:21 UTC (1532828901)
[    1.382389] ALSA device list:
[    1.382392]   No soundcards found.
[    1.399812] Freeing unused kernel memory: 1416K
[    1.399821] Write protecting the kernel read-only data: 18432k
[    1.401188] Freeing unused kernel memory: 2008K
[    1.409075] Freeing unused kernel memory: 1316K
[    1.720701] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.721204] ehci-pci: EHCI PCI platform driver
[    1.721531] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.721546] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.721566] ehci-pci 0000:00:1d.0: debug port 2
[    1.725504] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.725541] ehci-pci 0000:00:1d.0: irq 30, io mem 0x9080d000
[    1.736705] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.737344] hub 1-0:1.0: USB hub found
[    1.737364] hub 1-0:1.0: 8 ports detected
[    2.066694] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.214151] hub 1-1:1.0: USB hub found
[    2.214292] hub 1-1:1.0: 4 ports detected
[    2.493361] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.690020] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[    2.789097] hub 1-1.2:1.0: USB hub found
[    2.789396] hub 1-1.2:1.0: 4 ports detected
[    3.943439] random: crng init done

[   40.419829] **********************************************************
[   40.419830] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[   40.419831] **                                                      **
[   40.419832] ** trace_printk() being used. Allocating extra memory.  **
[   40.419834] **                                                      **
[   40.419835] ** This means that this is a DEBUG kernel and it is     **
[   40.419836] ** unsafe for production use.                           **
[   40.419837] **                                                      **
[   40.419838] ** If you see this message and you are not debugging    **
[   40.419839] ** the kernel, report this immediately to your vendor!  **
[   40.419840] **                                                      **
[   40.419841] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[   40.419842] **********************************************************
[   40.471322] F2FS-fs (mmcblk1p1): Found nat_bits in checkpoint
[   40.743159] F2FS-fs (mmcblk1p1): Mounted with checkpoint version = 57c0f7b3
[   40.935962] systemd[1]: systemd 239 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[   40.950357] systemd[1]: Detected architecture x86-64.
[   40.957286] systemd[1]: Set hostname to <ARCHER>.
[   41.226897] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   41.226908] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   41.300786] systemd[1]: /etc/systemd/system/netctl@wlan0\x2dscorpion.service:1: .include directives are deprecated, and support for them will be removed in a future version of systemd. Please use drop-in files instead.
[   41.308979] systemd[1]: Listening on LVM2 poll daemon socket.
[   41.309255] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   41.309826] systemd[1]: Listening on udev Kernel Socket.
[   41.310513] systemd[1]: Listening on Journal Socket.
[   41.542736] systemd-journald[247]: Received request to flush runtime journal from PID 1
[   41.680351] 80860F0A:00: ttyS1 at MMIO 0x90941000 (irq = 16, base_baud = 2764800) is a 16550A
[   41.680554] serial serial0: tty port ttyS1 registered
[   41.696995] 80860F0A:01: ttyS2 at MMIO 0x90947000 (irq = 17, base_baud = 2764800) is a 16550A
[   41.787172] Bluetooth: Core ver 2.22
[   41.787211] NET: Registered protocol family 31
[   41.787213] Bluetooth: HCI device and connection manager initialized
[   41.787221] Bluetooth: HCI socket layer initialized
[   41.787226] Bluetooth: L2CAP socket layer initialized
[   41.787240] Bluetooth: SCO socket layer initialized
[   41.802005] mousedev: PS/2 mouse device common for all mice
[   41.859793] Bluetooth: HCI UART driver ver 2.3
[   41.859798] Bluetooth: HCI UART protocol H4 registered
[   41.859800] Bluetooth: HCI UART protocol BCSP registered
[   41.859802] Bluetooth: HCI UART protocol ATH3K registered
[   41.859804] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   41.859922] Bluetooth: HCI UART protocol Intel registered
[   41.860145] Bluetooth: HCI UART protocol Broadcom registered
[   41.860147] Bluetooth: HCI UART protocol QCA registered
[   41.860149] Bluetooth: HCI UART protocol AG6XX registered
[   41.860151] Bluetooth: HCI UART protocol Marvell registered
[   41.860283] hci_uart_bcm serial0-0: ACPI Interrupt resource is active-high, this is usually wrong, treating the IRQ as active-low
[   41.860892] mei_txe 0000:00:1a.0: can't derive routing for PCI INT A
[   41.860897] mei_txe 0000:00:1a.0: PCI INT A: not connected
[   41.926841] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   41.949790] media: Linux media interface: v0.10
[   41.950381] EFI Variables Facility v0.08 2004-May-17
[   41.950573] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   41.975661] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   41.976299] Linux video capture interface: v2.00
[   42.057869] Bluetooth: hci0: BCM: chip id 82
[   42.058427] Bluetooth: hci0: BCM: features 0x2f
[   42.059676] Bluetooth: hci0: BCM43341B0
[   42.059690] Bluetooth: hci0: BCM43341B0 (002.001.014) build 0000
[   42.331539] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   42.331557] cfg80211: failed to load regulatory.db
[   42.343868] pstore: Registered efi as persistent store backend
[   42.345171] cht-bsw-rt5645 cht-bsw-rt5645: BIOS Routing: AIF2 connected
[   42.345177] cht-bsw-rt5645 cht-bsw-rt5645: quirk SSP0_AIF2 enabled
[   42.348914] cht-bsw-rt5645 cht-bsw-rt5645: snd-soc-dummy-dai <-> media-cpu-dai mapping ok
[   42.348979] cht-bsw-rt5645 cht-bsw-rt5645: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok
[   42.349448] cht-bsw-rt5645 cht-bsw-rt5645: rt5645-aif2 <-> ssp0-port mapping ok
[   42.365896] intel_soc_dts_thermal: request_threaded_irq ret -22
[   42.381561] intel_rapl: Found RAPL domain package
[   42.381566] intel_rapl: Found RAPL domain core
[   42.393260] uvcvideo: Found UVC 1.00 device USB Camera (0bda:57b5)
[   42.408500] uvcvideo 1-1.1:1.0: Entity type for entity Extension 7 was not initialized!
[   42.408506] uvcvideo 1-1.1:1.0: Entity type for entity Processing 2 was not initialized!
[   42.408510] uvcvideo 1-1.1:1.0: Entity type for entity Camera 1 was not initialized!
[   42.408513] uvcvideo 1-1.1:1.0: Entity type for entity Extension 4 was not initialized!
[   42.408678] input: USB Camera: USB Camera as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input9
[   42.408870] usbcore: registered new interface driver uvcvideo
[   42.408873] USB Video Class driver (1.1.1)
[   42.413733] input: chtrt5645 Headset as /devices/platform/80860F28:00/cht-bsw-rt5645/sound/card0/input8
[   42.414547] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[   42.416139] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[   42.417708] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[   42.420487] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[   42.484475] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43340-sdio for chip BCM43340/2
[   42.484798] usbcore: registered new interface driver brcmfmac
[   42.639588] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input10
[   42.639969] input: gpio-keys as /devices/platform/gpio-keys.1.auto/input/input11
[   42.644009] Adding 2101224k swap on /dev/mmcblk1p3.  Priority:-2 extents:1 across:2101224k SSFS
[   42.665404] checking generic (80000000 410000) vs hw (80000000 10000000)
[   42.665408] fb: switching to inteldrmfb from EFI VGA
[   42.665453] Console: switching to colour dummy device 80x25
[   42.665639] [drm] Replacing VGA console driver
[   42.665812] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   42.665815] [drm] Driver supports precise vblank timestamp query.
[   42.666700] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   42.669964] FAT-fs (mmcblk1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   42.676658] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43340-sdio for chip BCM43340/2
[   42.676763] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43340-sdio.clm_blob failed with error -2
[   42.676768] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   42.677211] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43340/2 wl0: Oct 23 2017 08:41:23 version 6.10.190.70 (r674464) FWID 01-98d71006
[   42.747685] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
[   42.750730] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   42.751290] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[   42.752062] [drm] HDaudio controller not detected, using LPE audio instead
[   42.752188] [drm] DRM_I915_DEBUG enabled
[   42.755296] fbcon: inteldrmfb (fb0) is primary device
[   42.960663] Bluetooth: hci0: BCM (002.001.014) build 0164
[   43.087315] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   43.912871] Console: switching to colour frame buffer device 170x48
[   43.947008] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   48.719314] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   56.466781] audit: type=1006 audit(1532828956.579:2): pid=522 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   56.533764] audit: type=1006 audit(1532828956.649:3): pid=579 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   62.039463] intel_sst_acpi 80860F28:00: FW Version 01.0c.00.01

loqs · 2018-07-29 14:23:11

Swayland wrote:

@loqs
Do you mean to say that if I boot with the kernel paramter CONFIG_F2FS_IO_TRACE=n, the trace_printk() warning would go away?

No if in the file named config that the AUR PKGBUILD linux-x205ta supplied you changed CONFIG_F2FS_IO_TRACE=y to CONFIG_F2FS_IO_TRACE=n then that would stop the message.
If the system is then fit for production use would then be a matter for your own judgement.
Edit:
After updating the checksum and rebuilding the kernel etc.

Last edited by loqs (2018-07-29 14:23:50)

Swayland · 2018-07-31 00:59:09

Alright, thanks @seth and @loqs, my system is working fine again! Marking this as solved.

Arch Linux

#26 2018-07-27 18:24:14

Re: [SOLVED]Kernel Panic Requested init failed

#27 2018-07-27 18:35:39

Re: [SOLVED]Kernel Panic Requested init failed

#28 2018-07-28 03:22:44

Re: [SOLVED]Kernel Panic Requested init failed

#29 2018-07-28 06:16:32

Re: [SOLVED]Kernel Panic Requested init failed

#30 2018-07-28 08:49:35

Re: [SOLVED]Kernel Panic Requested init failed

#31 2018-07-28 16:49:55

Re: [SOLVED]Kernel Panic Requested init failed

#32 2018-07-28 17:42:09

Re: [SOLVED]Kernel Panic Requested init failed

#33 2018-07-28 20:00:30

Re: [SOLVED]Kernel Panic Requested init failed

#34 2018-07-29 02:01:08

Re: [SOLVED]Kernel Panic Requested init failed

#35 2018-07-29 14:23:11

Re: [SOLVED]Kernel Panic Requested init failed

#36 2018-07-31 00:59:09

Re: [SOLVED]Kernel Panic Requested init failed

Board footer