You are not logged in.

Pages: 1 2 3

#26 2023-05-24 22:04:23

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

not sure about this command, is "-Syu`linux" a typo ?
I tried
pacman --sysroot /mnt -Syu`linux pacman
pacman --sysroot /mnt -Syu'linux pacman
pacman --sysroot /mnt -Syu linux pacman

None of them woked, it either tries to update the recent packages (not linux nor pacman) or tells me to end the quote

Offline

#27 2023-05-24 22:08:07

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

Yes, obviously fat-fingered that, sorry.

pacman --sysroot /mnt -Syu linux pacman

Edit: that'll update and re-install linux and pacman

Last edited by seth (2023-05-24 22:09:04)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#28 2023-05-24 22:15:28

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

Sorry pacman and linux were in the list indeed, so it download the packages and tried to install them again, but it's the same as what it did from cache: it does not install saying for each single file for each package "linux: /path/to/file exists in filesystem".
I bypassed this issue earlier with the "--overwrite \*"  parameter, it did install (from cache), but this is what led me to the new issue.

Should I try it anyway from -S (instead of -U) ?

Offline

#29 2023-05-24 22:23:42

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

each single file for each package

Not sure how that's possible for esp. the linux package as you re-installed it before, but it suggests that your package database is toast…

Is 

pacman --sysroot /mnt -Q

empty?

If not, then run 

pacman --dbonly --sysroot /mnt -Syu linux pacman

then 

pacman --sysroot /mnt -Syu linux pacman

Otherwise you're at https://wiki.archlinux.org/title/Pacman … l_database

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#30 2023-05-24 22:32:36

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

No I assure you, pacman database is okay, "pacman --sysroot /mnt -Q" gives the full list of installed packages.
When I was previously on emergency shell, it showed no output, but I think it had something to do with the fact that I had no module loaded into kernel... It might have some dependency ?

So I did "pacman --sysroot /mnt -Syu linux pacman --overwrite \*" again to force the installation even though pacman finds everything is "okay" already, and I'm still with new error where it can't find my "/new_root UUID"...

Offline

#31 2023-05-24 22:36:26

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

So I did "pacman --sysroot /mnt -Syu linux pacman --overwrite \*"

Don't. Glob. Overwrite.

I'm still with new error where it can't find my "/new_root UUID"...

And is that the same UUID as the error message?

Link a screenshot/photo of the actual error messages (everything before and after) and post the actual output of "lsblk -f"

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#32 2023-05-24 22:50:57

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

This one is what happens when I cold boot.
https://pasteboard.co/9GWGpXZigjLV.jpg
That state happened after I pacmaned -U with the cached linux kernel package

And this one is simply "lsblk -f" from install media.
https://pasteboard.co/U9iCOPGX35Wa.jpg

P. S. All partitions look ok as I can mount, read, write with no issue at all, the issue I have might be not so big, but very tiny like a needle in "idunno what's called in english"

Last edited by RogerRabbit (2023-05-24 22:53:51)

Offline

#33 2023-05-25 06:37:33

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

Add "nvme_core.default_ps_max_latency_us=0 iommu=soft" to the kernel commandline and try to boot the fallback image.
Do you have the nvme modules in the initramfs?

lsinitcpio /mnt/boot/initramfs-linux.img | grep -i nvme

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#34 2023-05-27 12:24:05

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

"lsinitcpio /mnt/boot/initramfs-linux.img | grep -i nvme" gives nothing, is it part of my issue ?
I tried to mount everything again, chrooted and used this command :

mkinitcpio --config /etc/mkinitcpio-custom.conf --generate /boot/initramfs-linux.img --kernel 6.3.3arch1-1

It did not give an error but the the exact same issue is still there when trying to boot.

I tried your kernel parameters with the fallback image, but again go the exact same issue.

Offline

#35 2023-05-27 14:08:49

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

"lsinitcpio /mnt/boot/initramfs-linux.img | grep -i nvme" gives nothing, is it part of my issue ?

Yes, but booting the fallback initramfs should™ work.

lsinitcpio /mnt/boot/initramfs-linux-fallback.img | grep -i nvme

In doubt also add "rootwait" and remove the quiet parameter.
See https://wiki.archlinux.org/title/Genera … l_messages for maybe more insight in the cause.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#36 2023-05-28 12:01:10

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

"lsinitcpio /mnt/boot/initramfs-linux-fallback.img | grep -i nvme" is the same as for initramfs-linux.img, no result for nvme.
lsinitcpio contains 311 lines for initramfs-linux-fallback.img, and 297 for initramfs-linux.img...

I did not have much time to spend on this earlier, but today I'm all free, I hope I can fix that issue, this is my main computer...

Offline

#37 2023-05-28 12:20:57

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

There's somethign wrong with the images, did you run ot of space?
The normal image is reasonable, but the fallback should have >> 1000 entries.

Make sure 

find /mnt/lib/modules -iname '*nvme*ko*'

gets you a bunch of modules, check 

lsmod | grep nvme

for which you're currently using, add them to the MODULES in /mnt/etc/mkinitcpio.conf and re-generate the initramfs for the (in doubt by chrooting into the system)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#38 2023-05-28 12:55:24

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

"finds" does find nvme modules, lsmod told me I was using nvme, nvme_core and nvme_common modules.
So I added them to the MODULES() variable (which was empty y the way), regenerated the img (from chroot), but the issue at boot is still the same.

Now if I do "lsinitcpio /mnt/boot/initramfs-linux-fallback.img | grep -i nvme" it gives me the added modules paths.

Offline

#39 2023-05-28 20:02:46

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

I have plenty of space, only 42% used on / partition, and 9% on /boot.

As a summary for those who might not want to read everything :

- I upgraded from kernel 6.3.1 to 6.3.3 using pacman with no error
- Right after that, I triggered a reboot to actually load the new kernel, but the computer froze during the reboot, I had to power it off
- Then the next boot failed to emergency shell with error "Failed to mount /boot" error  (unknown filesystem type 'vfat')"
- From a boot with the install media and chroot, I tried to reinstall the latest kernel to fix the issue using "pacman --sysroot /mnt"
- After the reboot I am back to the emergency shell with a new error "mount: /new_root: can't find UUID=XXXXXXXXXXXXXXXXXX" and inhability to enter any input
- The uuids from lsblk and grub.cfg do match, so I'm totally lost now...

Offline

#40 2023-05-28 20:14:28

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

Given that your initramfs were suspiciously sparse, post the entire output of lsinitcpio

lsinitcpio /mnt/boot/initramfs-linux-fallback.img | curl -F 'f:1=<-' ix.io

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#41 2023-05-28 20:32:34

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

The curl command is not working (Could not resolve host: ix.io), I actually don't understand it, I only use curl to download stuff...
So here is the raw result for lsinitcpio :

# lsinitcpio /mnt/boot/initramfs-linux-fallback.img
VERSION
bin
buildconfig
config
dev/
etc/
etc/fstab
etc/initrd-release
etc/ld.so.cache
etc/ld.so.conf
etc/modprobe.d/
etc/mtab
etc/os-release
hooks/
hooks/keymap
hooks/resume
hooks/udev
init
init_functions
keymap.bin
keymap.utf8
lib
lib64
new_root/
proc/
run/
sbin
sys/
tmp/
usr/
usr/bin/
usr/bin/[
usr/bin/arch
usr/bin/ascii
usr/bin/ash
usr/bin/awk
usr/bin/base32
usr/bin/base64
usr/bin/basename
usr/bin/bc
usr/bin/blkdiscard
usr/bin/blkid
usr/bin/busybox
usr/bin/bzip2
usr/bin/cat
usr/bin/chgrp
usr/bin/chmod
usr/bin/chown
usr/bin/chroot
usr/bin/clear
usr/bin/cp
usr/bin/cpio
usr/bin/crc32
usr/bin/cttyhack
usr/bin/cut
usr/bin/dd
usr/bin/depmod
usr/bin/df
usr/bin/dirname
usr/bin/dmesg
usr/bin/du
usr/bin/e2fsck
usr/bin/echo
usr/bin/env
usr/bin/exfatfsck
usr/bin/expr
usr/bin/fallocate
usr/bin/false
usr/bin/fatattr
usr/bin/free
usr/bin/fsck
usr/bin/fsck.btrfs
usr/bin/fsck.cramfs
usr/bin/fsck.exfat
usr/bin/fsck.ext2
usr/bin/fsck.ext3
usr/bin/fsck.ext4
usr/bin/fsck.fat
usr/bin/fsck.minix
usr/bin/fsck.msdos
usr/bin/fsck.vfat
usr/bin/fsck.xfs
usr/bin/fsfreeze
usr/bin/fstrim
usr/bin/fsync
usr/bin/getopt
usr/bin/grep
usr/bin/gzip
usr/bin/halt
usr/bin/head
usr/bin/hexdump
usr/bin/hexedit
usr/bin/i2ctransfer
usr/bin/ifconfig
usr/bin/init
usr/bin/insmod
usr/bin/install
usr/bin/ip
usr/bin/ipaddr
usr/bin/iplink
usr/bin/ipneigh
usr/bin/iproute
usr/bin/iprule
usr/bin/iptunnel
usr/bin/kbd_mode
usr/bin/kill
usr/bin/killall
usr/bin/kmod
usr/bin/less
usr/bin/link
usr/bin/ln
usr/bin/loadfont
usr/bin/loadkmap
usr/bin/losetup
usr/bin/ls
usr/bin/lsmod
usr/bin/lsscsi
usr/bin/lzop
usr/bin/md5sum
usr/bin/mim
usr/bin/mkdir
usr/bin/mkfifo
usr/bin/mknod
usr/bin/mkpasswd
usr/bin/mktemp
usr/bin/modinfo
usr/bin/modprobe
usr/bin/mount
usr/bin/mountpoint
usr/bin/mv
usr/bin/nc
usr/bin/netstat
usr/bin/nologin
usr/bin/nproc
usr/bin/nsenter
usr/bin/nslookup
usr/bin/nuke
usr/bin/openvt
usr/bin/partprobe
usr/bin/paste
usr/bin/pgrep
usr/bin/pidof
usr/bin/ping
usr/bin/ping6
usr/bin/poweroff
usr/bin/printf
usr/bin/ps
usr/bin/pwd
usr/bin/readlink
usr/bin/realpath
usr/bin/reboot
usr/bin/resume
usr/bin/rm
usr/bin/rmdir
usr/bin/rmmod
usr/bin/route
usr/bin/run-init
usr/bin/sed
usr/bin/seq
usr/bin/setfattr
usr/bin/setfont
usr/bin/sh
usr/bin/sha1sum
usr/bin/sha256sum
usr/bin/sha512sum
usr/bin/shuf
usr/bin/sleep
usr/bin/sort
usr/bin/stat
usr/bin/strings
usr/bin/switch_root
usr/bin/sync
usr/bin/systemd-tmpfiles
usr/bin/tac
usr/bin/tail
usr/bin/tar
usr/bin/tcpsvd
usr/bin/tee
usr/bin/telnet
usr/bin/test
usr/bin/tftp
usr/bin/touch
usr/bin/true
usr/bin/truncate
usr/bin/ts
usr/bin/udevadm
usr/bin/udhcpc
usr/bin/udhcpc6
usr/bin/umount
usr/bin/uname
usr/bin/uniq
usr/bin/unlink
usr/bin/unshare
usr/bin/unzip
usr/bin/uptime
usr/bin/vi
usr/bin/wc
usr/bin/wget
usr/bin/which
usr/bin/xfs_repair
usr/bin/xxd
usr/bin/xz
usr/bin/yes
usr/lib/
usr/lib/ld-linux-x86-64.so.2
usr/lib/libacl.so.1
usr/lib/libacl.so.1.1.2301
usr/lib/libaudit.so.1
usr/lib/libaudit.so.1.0.0
usr/lib/libblkid.so.1
usr/lib/libblkid.so.1.1.0
usr/lib/libc.so.6
usr/lib/libcap-ng.so.0
usr/lib/libcap-ng.so.0.0.0
usr/lib/libcap.so.2
usr/lib/libcap.so.2.69
usr/lib/libcom_err.so.2
usr/lib/libcom_err.so.2.1
usr/lib/libcrypt.so.2
usr/lib/libcrypt.so.2.0.0
usr/lib/libcrypto.so.3
usr/lib/libe2p.so.2
usr/lib/libe2p.so.2.3
usr/lib/libext2fs.so.2
usr/lib/libext2fs.so.2.4
usr/lib/libgcc_s.so.1
usr/lib/libgcrypt.so.20
usr/lib/libgcrypt.so.20.4.2
usr/lib/libgpg-error.so.0
usr/lib/libgpg-error.so.0.34.0
usr/lib/libip4tc.so.2
usr/lib/libip4tc.so.2.0.0
usr/lib/libkmod.so.2
usr/lib/libkmod.so.2.4.0
usr/lib/liblz4.so.1
usr/lib/liblz4.so.1.9.4
usr/lib/liblzma.so.5
usr/lib/liblzma.so.5.4.3
usr/lib/libm.so.6
usr/lib/libmount.so.1
usr/lib/libmount.so.1.1.0
usr/lib/libpam.so.0
usr/lib/libpam.so.0.85.1
usr/lib/libseccomp.so.2
usr/lib/libseccomp.so.2.5.4
usr/lib/liburcu-common.so.8
usr/lib/liburcu-common.so.8.1.0
usr/lib/liburcu.so.8
usr/lib/liburcu.so.8.1.0
usr/lib/libuuid.so.1
usr/lib/libuuid.so.1.3.0
usr/lib/libz.so.1
usr/lib/libz.so.1.2.13
usr/lib/libzstd.so.1
usr/lib/libzstd.so.1.5.5
usr/lib/modprobe.d/
usr/lib/modprobe.d/bluetooth-usb.conf
usr/lib/modprobe.d/nvdimm-security.conf
usr/lib/modprobe.d/systemd.conf
usr/lib/modules/
usr/lib/modules/6.3.4-arch1-1/
usr/lib/modules/6.3.4-arch1-1/kernel/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/block/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/block/virtio_blk.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom/cdrom.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-core.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-sbp2.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/hid/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid/usbhid.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_block.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_core.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common/nvme-common.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme-core.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/scsi/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/scsi/sr_mod.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/usb/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage/usb-storage.ko
usr/lib/modules/6.3.4-arch1-1/kernel/lib/
usr/lib/modules/6.3.4-arch1-1/kernel/lib/crc-itu-t.ko
usr/lib/modules/6.3.4-arch1-1/modules.alias.bin
usr/lib/modules/6.3.4-arch1-1/modules.builtin.alias.bin
usr/lib/modules/6.3.4-arch1-1/modules.builtin.bin
usr/lib/modules/6.3.4-arch1-1/modules.dep.bin
usr/lib/modules/6.3.4-arch1-1/modules.devname
usr/lib/modules/6.3.4-arch1-1/modules.softdep
usr/lib/modules/6.3.4-arch1-1/modules.symbols.bin
usr/lib/os-release
usr/lib/systemd/
usr/lib/systemd/libsystemd-shared-253.4-1.so
usr/lib/systemd/systemd-udevd
usr/lib/udev/
usr/lib/udev/ata_id
usr/lib/udev/rules.d/
usr/lib/udev/rules.d/50-udev-default.rules
usr/lib/udev/rules.d/60-persistent-storage.rules
usr/lib/udev/rules.d/64-btrfs.rules
usr/lib/udev/rules.d/80-drivers.rules
usr/lib/udev/scsi_id
usr/lib64
usr/local/
usr/local/bin/
usr/local/lib/
usr/local/sbin/
usr/sbin
var/
var/run

Offline

#42 2023-05-28 20:39:10

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

As you can see I tried to upgrade to 6.3.4 hoping this would fix some incompatibility but it changed nothing.

Offline

#43 2023-05-28 20:50:38

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

https://man.archlinux.org/man/core/curl/curl.1.en#F, - it's not working because you don't have a network connection (or at least DNS)

You added the nvme modules, but otherwise there're almost no modules *in the fallback image* - notably no filesystem modules.
There's something massively broken w/ the image generation.

Post your mkinitcpio.conf

Edit: maybe also the output of "mkinitcpio -v -P" …

Last edited by seth (2023-05-28 20:53:13)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#44 2023-05-28 20:50:49

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

Just in case, here is the same thing for initramfs-linux.img :

VERSION
bin
buildconfig
config
dev/
etc/
etc/fstab
etc/initrd-release
etc/ld.so.cache
etc/ld.so.conf
etc/modprobe.d/
etc/mtab
etc/os-release
hooks/
hooks/keymap
hooks/resume
hooks/udev
init
init_functions
keymap.bin
keymap.utf8
lib
lib64
new_root/
proc/
run/
sbin
sys/
tmp/
usr/
usr/bin/
usr/bin/[
usr/bin/arch
usr/bin/ascii
usr/bin/ash
usr/bin/awk
usr/bin/base32
usr/bin/base64
usr/bin/basename
usr/bin/bc
usr/bin/blkdiscard
usr/bin/blkid
usr/bin/busybox
usr/bin/bzip2
usr/bin/cat
usr/bin/chgrp
usr/bin/chmod
usr/bin/chown
usr/bin/chroot
usr/bin/clear
usr/bin/cp
usr/bin/cpio
usr/bin/crc32
usr/bin/cttyhack
usr/bin/cut
usr/bin/dd
usr/bin/depmod
usr/bin/df
usr/bin/dirname
usr/bin/dmesg
usr/bin/du
usr/bin/e2fsck
usr/bin/echo
usr/bin/env
usr/bin/expr
usr/bin/fallocate
usr/bin/false
usr/bin/fatattr
usr/bin/free
usr/bin/fsck
usr/bin/fsck.ext2
usr/bin/fsck.ext3
usr/bin/fsck.ext4
usr/bin/fsfreeze
usr/bin/fstrim
usr/bin/fsync
usr/bin/getopt
usr/bin/grep
usr/bin/gzip
usr/bin/halt
usr/bin/head
usr/bin/hexdump
usr/bin/hexedit
usr/bin/i2ctransfer
usr/bin/ifconfig
usr/bin/init
usr/bin/insmod
usr/bin/install
usr/bin/ip
usr/bin/ipaddr
usr/bin/iplink
usr/bin/ipneigh
usr/bin/iproute
usr/bin/iprule
usr/bin/iptunnel
usr/bin/kbd_mode
usr/bin/kill
usr/bin/killall
usr/bin/kmod
usr/bin/less
usr/bin/link
usr/bin/ln
usr/bin/loadfont
usr/bin/loadkmap
usr/bin/losetup
usr/bin/ls
usr/bin/lsmod
usr/bin/lsscsi
usr/bin/lzop
usr/bin/md5sum
usr/bin/mim
usr/bin/mkdir
usr/bin/mkfifo
usr/bin/mknod
usr/bin/mkpasswd
usr/bin/mktemp
usr/bin/modinfo
usr/bin/modprobe
usr/bin/mount
usr/bin/mountpoint
usr/bin/mv
usr/bin/nc
usr/bin/netstat
usr/bin/nologin
usr/bin/nproc
usr/bin/nsenter
usr/bin/nslookup
usr/bin/nuke
usr/bin/openvt
usr/bin/partprobe
usr/bin/paste
usr/bin/pgrep
usr/bin/pidof
usr/bin/ping
usr/bin/ping6
usr/bin/poweroff
usr/bin/printf
usr/bin/ps
usr/bin/pwd
usr/bin/readlink
usr/bin/realpath
usr/bin/reboot
usr/bin/resume
usr/bin/rm
usr/bin/rmdir
usr/bin/rmmod
usr/bin/route
usr/bin/run-init
usr/bin/sed
usr/bin/seq
usr/bin/setfattr
usr/bin/setfont
usr/bin/sh
usr/bin/sha1sum
usr/bin/sha256sum
usr/bin/sha512sum
usr/bin/shuf
usr/bin/sleep
usr/bin/sort
usr/bin/stat
usr/bin/strings
usr/bin/switch_root
usr/bin/sync
usr/bin/systemd-tmpfiles
usr/bin/tac
usr/bin/tail
usr/bin/tar
usr/bin/tcpsvd
usr/bin/tee
usr/bin/telnet
usr/bin/test
usr/bin/tftp
usr/bin/touch
usr/bin/true
usr/bin/truncate
usr/bin/ts
usr/bin/udevadm
usr/bin/udhcpc
usr/bin/udhcpc6
usr/bin/umount
usr/bin/uname
usr/bin/uniq
usr/bin/unlink
usr/bin/unshare
usr/bin/unzip
usr/bin/uptime
usr/bin/vi
usr/bin/wc
usr/bin/wget
usr/bin/which
usr/bin/xxd
usr/bin/xz
usr/bin/yes
usr/lib/
usr/lib/ld-linux-x86-64.so.2
usr/lib/libacl.so.1
usr/lib/libacl.so.1.1.2301
usr/lib/libaudit.so.1
usr/lib/libaudit.so.1.0.0
usr/lib/libblkid.so.1
usr/lib/libblkid.so.1.1.0
usr/lib/libc.so.6
usr/lib/libcap-ng.so.0
usr/lib/libcap-ng.so.0.0.0
usr/lib/libcap.so.2
usr/lib/libcap.so.2.69
usr/lib/libcom_err.so.2
usr/lib/libcom_err.so.2.1
usr/lib/libcrypt.so.2
usr/lib/libcrypt.so.2.0.0
usr/lib/libcrypto.so.3
usr/lib/libe2p.so.2
usr/lib/libe2p.so.2.3
usr/lib/libext2fs.so.2
usr/lib/libext2fs.so.2.4
usr/lib/libgcc_s.so.1
usr/lib/libgcrypt.so.20
usr/lib/libgcrypt.so.20.4.2
usr/lib/libgpg-error.so.0
usr/lib/libgpg-error.so.0.34.0
usr/lib/libip4tc.so.2
usr/lib/libip4tc.so.2.0.0
usr/lib/libkmod.so.2
usr/lib/libkmod.so.2.4.0
usr/lib/liblz4.so.1
usr/lib/liblz4.so.1.9.4
usr/lib/liblzma.so.5
usr/lib/liblzma.so.5.4.3
usr/lib/libm.so.6
usr/lib/libmount.so.1
usr/lib/libmount.so.1.1.0
usr/lib/libpam.so.0
usr/lib/libpam.so.0.85.1
usr/lib/libseccomp.so.2
usr/lib/libseccomp.so.2.5.4
usr/lib/libuuid.so.1
usr/lib/libuuid.so.1.3.0
usr/lib/libz.so.1
usr/lib/libz.so.1.2.13
usr/lib/libzstd.so.1
usr/lib/libzstd.so.1.5.5
usr/lib/modprobe.d/
usr/lib/modprobe.d/bluetooth-usb.conf
usr/lib/modprobe.d/nvdimm-security.conf
usr/lib/modprobe.d/systemd.conf
usr/lib/modules/
usr/lib/modules/6.3.4-arch1-1/
usr/lib/modules/6.3.4-arch1-1/kernel/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/block/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/block/virtio_blk.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom/cdrom.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-core.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-sbp2.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/hid/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid/usbhid.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_block.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_core.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common/nvme-common.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme-core.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/scsi/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/scsi/sr_mod.ko
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/usb/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage/
usr/lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage/usb-storage.ko
usr/lib/modules/6.3.4-arch1-1/kernel/lib/
usr/lib/modules/6.3.4-arch1-1/kernel/lib/crc-itu-t.ko
usr/lib/modules/6.3.4-arch1-1/modules.alias.bin
usr/lib/modules/6.3.4-arch1-1/modules.builtin.alias.bin
usr/lib/modules/6.3.4-arch1-1/modules.builtin.bin
usr/lib/modules/6.3.4-arch1-1/modules.dep.bin
usr/lib/modules/6.3.4-arch1-1/modules.devname
usr/lib/modules/6.3.4-arch1-1/modules.softdep
usr/lib/modules/6.3.4-arch1-1/modules.symbols.bin
usr/lib/os-release
usr/lib/systemd/
usr/lib/systemd/libsystemd-shared-253.4-1.so
usr/lib/systemd/systemd-udevd
usr/lib/udev/
usr/lib/udev/ata_id
usr/lib/udev/rules.d/
usr/lib/udev/rules.d/50-udev-default.rules
usr/lib/udev/rules.d/60-persistent-storage.rules
usr/lib/udev/rules.d/64-btrfs.rules
usr/lib/udev/rules.d/80-drivers.rules
usr/lib/udev/scsi_id
usr/lib64
usr/local/
usr/local/bin/
usr/local/lib/
usr/local/sbin/
usr/sbin
var/
var/run

Offline

#45 2023-05-28 20:54:37

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

Here is the mkinitcpio.conf :

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES=(usbhid xhci_hcd)
MODULES=(nvme nvme_core nvme_common)

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=()

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No RAID, lvm2, or encrypted root is needed.
#    HOOKS=(base)
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS=(base udev autodetect modconf block filesystems fsck)
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS=(base udev modconf block filesystems fsck)
#
##   This setup assembles a mdadm array with an encrypted root file system.
##   Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
#    HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
#
##   This setup loads an lvm2 volume group.
#    HOOKS=(base udev modconf block lvm2 filesystems fsck)
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr and fsck hooks.
HOOKS=(base udev autodetect modconf kms keyboard keymap consolefont block filesystems resume fsck)

# COMPRESSION
# Use this to compress the initramfs image. By default, zstd compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="zstd"
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()

# MODULES_DECOMPRESS
# Decompress kernel modules during initramfs creation.
# Enable to speedup boot process, disable to save RAM
# during early userspace. Switch (yes/no).
#MODULES_DECOMPRESS="yes"

Offline

#46 2023-05-28 21:00:09

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

And here is the output for "mkinitcpio -v -P" from chroot (sorry I saw this only afterwards) :

==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
  -> -v -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: '6.3.4-arch1-1'
  -> Running build hook: [/usr/lib/initcpio/install/base]
    adding file: /bin/busybox
    adding file: /usr/lib/libcrypt.so.2.0.0
    adding symlink: /usr/lib/libcrypt.so.2 -> libcrypt.so.2.0.0
    adding file: /usr/lib/libc.so.6
    adding file: /usr/lib64/ld-linux-x86-64.so.2
    adding symlink: /usr/bin/[ -> busybox
    adding symlink: /usr/bin/arch -> busybox
    adding symlink: /usr/bin/ascii -> busybox
    adding symlink: /usr/bin/ash -> busybox
    adding symlink: /usr/bin/awk -> busybox
    adding symlink: /usr/bin/base32 -> busybox
    adding symlink: /usr/bin/base64 -> busybox
    adding symlink: /usr/bin/basename -> busybox
    adding symlink: /usr/bin/bc -> busybox
    adding symlink: /usr/bin/blkdiscard -> busybox
    adding symlink: /usr/bin/bzip2 -> busybox
    adding symlink: /usr/bin/cat -> busybox
    adding symlink: /usr/bin/chgrp -> busybox
    adding symlink: /usr/bin/chmod -> busybox
    adding symlink: /usr/bin/chown -> busybox
    adding symlink: /usr/bin/chroot -> busybox
    adding symlink: /usr/bin/clear -> busybox
    adding symlink: /usr/bin/cp -> busybox
    adding symlink: /usr/bin/cpio -> busybox
    adding symlink: /usr/bin/crc32 -> busybox
    adding symlink: /usr/bin/cttyhack -> busybox
    adding symlink: /usr/bin/cut -> busybox
    adding symlink: /usr/bin/dd -> busybox
    adding symlink: /usr/bin/df -> busybox
    adding symlink: /usr/bin/dirname -> busybox
    adding symlink: /usr/bin/dmesg -> busybox
    adding symlink: /usr/bin/du -> busybox
    adding symlink: /usr/bin/echo -> busybox
    adding symlink: /usr/bin/env -> busybox
    adding symlink: /usr/bin/expr -> busybox
    adding symlink: /usr/bin/fallocate -> busybox
    adding symlink: /usr/bin/false -> busybox
    adding symlink: /usr/bin/fatattr -> busybox
    adding symlink: /usr/bin/free -> busybox
    adding symlink: /usr/bin/fsfreeze -> busybox
    adding symlink: /usr/bin/fstrim -> busybox
    adding symlink: /usr/bin/fsync -> busybox
    adding symlink: /usr/bin/getopt -> busybox
    adding symlink: /usr/bin/grep -> busybox
    adding symlink: /usr/bin/gzip -> busybox
    adding symlink: /usr/bin/halt -> busybox
    adding symlink: /usr/bin/head -> busybox
    adding symlink: /usr/bin/hexdump -> busybox
    adding symlink: /usr/bin/hexedit -> busybox
    adding symlink: /usr/bin/i2ctransfer -> busybox
    adding symlink: /usr/bin/ifconfig -> busybox
    adding symlink: /usr/bin/init -> busybox
    adding symlink: /usr/bin/install -> busybox
    adding symlink: /usr/bin/ip -> busybox
    adding symlink: /usr/bin/ipaddr -> busybox
    adding symlink: /usr/bin/iplink -> busybox
    adding symlink: /usr/bin/ipneigh -> busybox
    adding symlink: /usr/bin/iproute -> busybox
    adding symlink: /usr/bin/iprule -> busybox
    adding symlink: /usr/bin/iptunnel -> busybox
    adding symlink: /usr/bin/kbd_mode -> busybox
    adding symlink: /usr/bin/kill -> busybox
    adding symlink: /usr/bin/killall -> busybox
    adding symlink: /usr/bin/less -> busybox
    adding symlink: /usr/bin/link -> busybox
    adding symlink: /usr/bin/ln -> busybox
    adding symlink: /usr/bin/loadfont -> busybox
    adding symlink: /usr/bin/loadkmap -> busybox
    adding symlink: /usr/bin/losetup -> busybox
    adding symlink: /usr/bin/ls -> busybox
    adding symlink: /usr/bin/lsscsi -> busybox
    adding symlink: /usr/bin/lzop -> busybox
    adding symlink: /usr/bin/md5sum -> busybox
    adding symlink: /usr/bin/mim -> busybox
    adding symlink: /usr/bin/mkdir -> busybox
    adding symlink: /usr/bin/mkfifo -> busybox
    adding symlink: /usr/bin/mknod -> busybox
    adding symlink: /usr/bin/mkpasswd -> busybox
    adding symlink: /usr/bin/mktemp -> busybox
    adding symlink: /usr/bin/mountpoint -> busybox
    adding symlink: /usr/bin/mv -> busybox
    adding symlink: /usr/bin/nc -> busybox
    adding symlink: /usr/bin/netstat -> busybox
    adding symlink: /usr/bin/nologin -> busybox
    adding symlink: /usr/bin/nproc -> busybox
    adding symlink: /usr/bin/nsenter -> busybox
    adding symlink: /usr/bin/nslookup -> busybox
    adding symlink: /usr/bin/nuke -> busybox
    adding symlink: /usr/bin/openvt -> busybox
    adding symlink: /usr/bin/partprobe -> busybox
    adding symlink: /usr/bin/paste -> busybox
    adding symlink: /usr/bin/pgrep -> busybox
    adding symlink: /usr/bin/pidof -> busybox
    adding symlink: /usr/bin/ping -> busybox
    adding symlink: /usr/bin/ping6 -> busybox
    adding symlink: /usr/bin/poweroff -> busybox
    adding symlink: /usr/bin/printf -> busybox
    adding symlink: /usr/bin/ps -> busybox
    adding symlink: /usr/bin/pwd -> busybox
    adding symlink: /usr/bin/readlink -> busybox
    adding symlink: /usr/bin/realpath -> busybox
    adding symlink: /usr/bin/reboot -> busybox
    adding symlink: /usr/bin/resume -> busybox
    adding symlink: /usr/bin/rm -> busybox
    adding symlink: /usr/bin/rmdir -> busybox
    adding symlink: /usr/bin/route -> busybox
    adding symlink: /usr/bin/run-init -> busybox
    adding symlink: /usr/bin/sed -> busybox
    adding symlink: /usr/bin/seq -> busybox
    adding symlink: /usr/bin/setfattr -> busybox
    adding symlink: /usr/bin/setfont -> busybox
    adding symlink: /usr/bin/sh -> busybox
    adding symlink: /usr/bin/sha1sum -> busybox
    adding symlink: /usr/bin/sha256sum -> busybox
    adding symlink: /usr/bin/sha512sum -> busybox
    adding symlink: /usr/bin/shuf -> busybox
    adding symlink: /usr/bin/sleep -> busybox
    adding symlink: /usr/bin/sort -> busybox
    adding symlink: /usr/bin/stat -> busybox
    adding symlink: /usr/bin/strings -> busybox
    adding symlink: /usr/bin/sync -> busybox
    adding symlink: /usr/bin/tac -> busybox
    adding symlink: /usr/bin/tail -> busybox
    adding symlink: /usr/bin/tar -> busybox
    adding symlink: /usr/bin/tcpsvd -> busybox
    adding symlink: /usr/bin/tee -> busybox
    adding symlink: /usr/bin/telnet -> busybox
    adding symlink: /usr/bin/test -> busybox
    adding symlink: /usr/bin/tftp -> busybox
    adding symlink: /usr/bin/touch -> busybox
    adding symlink: /usr/bin/true -> busybox
    adding symlink: /usr/bin/truncate -> busybox
    adding symlink: /usr/bin/ts -> busybox
    adding symlink: /usr/bin/udhcpc -> busybox
    adding symlink: /usr/bin/udhcpc6 -> busybox
    adding symlink: /usr/bin/umount -> busybox
    adding symlink: /usr/bin/uname -> busybox
    adding symlink: /usr/bin/uniq -> busybox
    adding symlink: /usr/bin/unlink -> busybox
    adding symlink: /usr/bin/unshare -> busybox
    adding symlink: /usr/bin/unzip -> busybox
    adding symlink: /usr/bin/uptime -> busybox
    adding symlink: /usr/bin/vi -> busybox
    adding symlink: /usr/bin/wc -> busybox
    adding symlink: /usr/bin/wget -> busybox
    adding symlink: /usr/bin/which -> busybox
    adding symlink: /usr/bin/xxd -> busybox
    adding symlink: /usr/bin/xz -> busybox
    adding symlink: /usr/bin/yes -> busybox
    adding file: /usr/bin/kmod
    adding file: /usr/lib/libzstd.so.1.5.5
    adding symlink: /usr/lib/libzstd.so.1 -> libzstd.so.1.5.5
    adding file: /usr/lib/liblzma.so.5.4.3
    adding symlink: /usr/lib/liblzma.so.5 -> liblzma.so.5.4.3
    adding file: /usr/lib/libz.so.1.2.13
    adding symlink: /usr/lib/libz.so.1 -> libz.so.1.2.13
    adding file: /usr/lib/libcrypto.so.3
    adding file: /usr/lib/libgcc_s.so.1
    adding symlink: /usr/bin/depmod -> kmod
    adding symlink: /usr/bin/insmod -> kmod
    adding symlink: /usr/bin/rmmod -> kmod
    adding symlink: /usr/bin/lsmod -> kmod
    adding symlink: /usr/bin/modprobe -> kmod
    adding symlink: /usr/bin/modinfo -> kmod
    adding file: /usr/bin/blkid
    adding file: /usr/lib/libblkid.so.1.1.0
    adding symlink: /usr/lib/libblkid.so.1 -> libblkid.so.1.1.0
    adding file: /usr/bin/mount
    adding file: /usr/lib/libmount.so.1.1.0
    adding symlink: /usr/lib/libmount.so.1 -> libmount.so.1.1.0
    adding file: /usr/bin/switch_root
    adding file: /init_functions
    adding file: /init
  -> Running build hook: [/usr/lib/initcpio/install/udev]
    adding file: /usr/bin/udevadm
    adding dir: /usr/lib/systemd
    adding symlink: /usr/lib/systemd/systemd-udevd -> /usr/bin/udevadm
    adding file: /usr/lib/systemd/libsystemd-shared-253.4-1.so
    adding file: /usr/lib/libkmod.so.2.4.0
    adding symlink: /usr/lib/libkmod.so.2 -> libkmod.so.2.4.0
    adding file: /usr/lib/libacl.so.1.1.2301
    adding symlink: /usr/lib/libacl.so.1 -> libacl.so.1.1.2301
    adding file: /usr/lib/libcap.so.2.69
    adding symlink: /usr/lib/libcap.so.2 -> libcap.so.2.69
    adding file: /usr/lib/libgcrypt.so.20.4.2
    adding symlink: /usr/lib/libgcrypt.so.20 -> libgcrypt.so.20.4.2
    adding file: /usr/lib/libip4tc.so.2.0.0
    adding symlink: /usr/lib/libip4tc.so.2 -> libip4tc.so.2.0.0
    adding file: /usr/lib/liblz4.so.1.9.4
    adding symlink: /usr/lib/liblz4.so.1 -> liblz4.so.1.9.4
    adding file: /usr/lib/libpam.so.0.85.1
    adding symlink: /usr/lib/libpam.so.0 -> libpam.so.0.85.1
    adding file: /usr/lib/libseccomp.so.2.5.4
    adding symlink: /usr/lib/libseccomp.so.2 -> libseccomp.so.2.5.4
    adding file: /usr/lib/libm.so.6
    adding file: /usr/lib/libgpg-error.so.0.34.0
    adding symlink: /usr/lib/libgpg-error.so.0 -> libgpg-error.so.0.34.0
    adding file: /usr/lib/libaudit.so.1.0.0
    adding symlink: /usr/lib/libaudit.so.1 -> libaudit.so.1.0.0
    adding file: /usr/lib/libcap-ng.so.0.0.0
    adding symlink: /usr/lib/libcap-ng.so.0 -> libcap-ng.so.0.0.0
    overwriting file: /usr/bin/udevadm
    adding file: /usr/bin/systemd-tmpfiles
    adding dir: /usr/lib/udev/rules.d
    adding file: /usr/lib/udev/rules.d/50-udev-default.rules
    adding file: /usr/lib/udev/rules.d/60-persistent-storage.rules
    adding file: /usr/lib/udev/ata_id
    overwriting file: /usr/lib/udev/ata_id
    overwriting file: /usr/lib/udev/ata_id
    adding file: /usr/lib/udev/scsi_id
    overwriting file: /usr/lib/udev/scsi_id
    adding file: /usr/lib/udev/rules.d/64-btrfs.rules
    overwriting file: /usr/bin/udevadm
    adding file: /usr/lib/udev/rules.d/80-drivers.rules
    overwriting file: /usr/lib/udev/ata_id
    overwriting file: /usr/lib/udev/scsi_id
    adding file: /hooks/udev
  -> Running build hook: [/usr/lib/initcpio/install/autodetect]
find: ‘sort’ terminated by signal 13
modprobe: ERROR: missing parameters. See -h.
    caching 1 modules
  -> Running build hook: [/usr/lib/initcpio/install/modconf]
    adding dir: /etc/modprobe.d
    adding dir: /usr/lib/modprobe.d
    adding file: /usr/lib/modprobe.d/bluetooth-usb.conf
    adding file: /usr/lib/modprobe.d/nvdimm-security.conf
    adding file: /usr/lib/modprobe.d/systemd.conf
  -> Running build hook: [/usr/lib/initcpio/install/kms]
  -> Running build hook: [/usr/lib/initcpio/install/keyboard]
    adding module: usbhid (/lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid/usbhid.ko.zst)
  -> Running build hook: [/usr/lib/initcpio/install/keymap]
    adding file: /hooks/keymap
  -> Running build hook: [/usr/lib/initcpio/install/consolefont]
==> WARNING: consolefont: no font found in configuration
  -> Running build hook: [/usr/lib/initcpio/install/block]
    adding module: sr_mod (/lib/modules/6.3.4-arch1-1/kernel/drivers/scsi/sr_mod.ko.zst)
    adding module: cdrom (/lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom/cdrom.ko.zst)
    adding module: usb-storage (/lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage/usb-storage.ko.zst)
    adding module: mmc_block (/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_block.ko.zst)
    adding module: mmc_core (/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_core.ko.zst)
    adding module: firewire-sbp2 (/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-sbp2.ko.zst)
    adding module: firewire-core (/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-core.ko.zst)
    adding module: crc-itu-t (/lib/modules/6.3.4-arch1-1/kernel/lib/crc-itu-t.ko.zst)
    adding module: virtio_blk (/lib/modules/6.3.4-arch1-1/kernel/drivers/block/virtio_blk.ko.zst)
  -> Running build hook: [/usr/lib/initcpio/install/filesystems]
  -> Running build hook: [/usr/lib/initcpio/install/resume]
    adding file: /hooks/resume
  -> Running build hook: [/usr/lib/initcpio/install/fsck]
    adding file: /usr/bin/e2fsck
    adding file: /usr/lib/libext2fs.so.2.4
    adding symlink: /usr/lib/libext2fs.so.2 -> libext2fs.so.2.4
    adding file: /usr/lib/libcom_err.so.2.1
    adding symlink: /usr/lib/libcom_err.so.2 -> libcom_err.so.2.1
    adding file: /usr/lib/libuuid.so.1.3.0
    adding symlink: /usr/lib/libuuid.so.1 -> libuuid.so.1.3.0
    adding file: /usr/lib/libe2p.so.2.3
    adding symlink: /usr/lib/libe2p.so.2 -> libe2p.so.2.3
    adding symlink: /usr/bin/fsck.ext2 -> e2fsck
    adding symlink: /usr/bin/fsck.ext3 -> e2fsck
    adding symlink: /usr/bin/fsck.ext4 -> e2fsck
    adding file: /usr/bin/fsck
    adding module: nvme (/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme.ko.zst)
    adding module: nvme-core (/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme-core.ko.zst)
    adding module: nvme-common (/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common/nvme-common.ko.zst)
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/firewire
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-sbp2.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common/nvme-common.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_block.ko.zst
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-core.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/lib
    adding file: /lib/modules/6.3.4-arch1-1/kernel/lib/crc-itu-t.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme-core.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/block
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/block/virtio_blk.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom/cdrom.ko.zst
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_core.ko.zst
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid/usbhid.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/scsi
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/scsi/sr_mod.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage/usb-storage.ko.zst
==> Generating module dependencies
    adding file: /lib/modules/6.3.4-arch1-1/modules.builtin
    adding file: /lib/modules/6.3.4-arch1-1/modules.builtin.modinfo
    adding file: /lib/modules/6.3.4-arch1-1/modules.order
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux.img'
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
  -> -v -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: '6.3.4-arch1-1'
  -> Running build hook: [/usr/lib/initcpio/install/base]
    adding file: /bin/busybox
    adding file: /usr/lib/libcrypt.so.2.0.0
    adding symlink: /usr/lib/libcrypt.so.2 -> libcrypt.so.2.0.0
    adding file: /usr/lib/libc.so.6
    adding file: /usr/lib64/ld-linux-x86-64.so.2
    adding symlink: /usr/bin/[ -> busybox
    adding symlink: /usr/bin/arch -> busybox
    adding symlink: /usr/bin/ascii -> busybox
    adding symlink: /usr/bin/ash -> busybox
    adding symlink: /usr/bin/awk -> busybox
    adding symlink: /usr/bin/base32 -> busybox
    adding symlink: /usr/bin/base64 -> busybox
    adding symlink: /usr/bin/basename -> busybox
    adding symlink: /usr/bin/bc -> busybox
    adding symlink: /usr/bin/blkdiscard -> busybox
    adding symlink: /usr/bin/bzip2 -> busybox
    adding symlink: /usr/bin/cat -> busybox
    adding symlink: /usr/bin/chgrp -> busybox
    adding symlink: /usr/bin/chmod -> busybox
    adding symlink: /usr/bin/chown -> busybox
    adding symlink: /usr/bin/chroot -> busybox
    adding symlink: /usr/bin/clear -> busybox
    adding symlink: /usr/bin/cp -> busybox
    adding symlink: /usr/bin/cpio -> busybox
    adding symlink: /usr/bin/crc32 -> busybox
    adding symlink: /usr/bin/cttyhack -> busybox
    adding symlink: /usr/bin/cut -> busybox
    adding symlink: /usr/bin/dd -> busybox
    adding symlink: /usr/bin/df -> busybox
    adding symlink: /usr/bin/dirname -> busybox
    adding symlink: /usr/bin/dmesg -> busybox
    adding symlink: /usr/bin/du -> busybox
    adding symlink: /usr/bin/echo -> busybox
    adding symlink: /usr/bin/env -> busybox
    adding symlink: /usr/bin/expr -> busybox
    adding symlink: /usr/bin/fallocate -> busybox
    adding symlink: /usr/bin/false -> busybox
    adding symlink: /usr/bin/fatattr -> busybox
    adding symlink: /usr/bin/free -> busybox
    adding symlink: /usr/bin/fsfreeze -> busybox
    adding symlink: /usr/bin/fstrim -> busybox
    adding symlink: /usr/bin/fsync -> busybox
    adding symlink: /usr/bin/getopt -> busybox
    adding symlink: /usr/bin/grep -> busybox
    adding symlink: /usr/bin/gzip -> busybox
    adding symlink: /usr/bin/halt -> busybox
    adding symlink: /usr/bin/head -> busybox
    adding symlink: /usr/bin/hexdump -> busybox
    adding symlink: /usr/bin/hexedit -> busybox
    adding symlink: /usr/bin/i2ctransfer -> busybox
    adding symlink: /usr/bin/ifconfig -> busybox
    adding symlink: /usr/bin/init -> busybox
    adding symlink: /usr/bin/install -> busybox
    adding symlink: /usr/bin/ip -> busybox
    adding symlink: /usr/bin/ipaddr -> busybox
    adding symlink: /usr/bin/iplink -> busybox
    adding symlink: /usr/bin/ipneigh -> busybox
    adding symlink: /usr/bin/iproute -> busybox
    adding symlink: /usr/bin/iprule -> busybox
    adding symlink: /usr/bin/iptunnel -> busybox
    adding symlink: /usr/bin/kbd_mode -> busybox
    adding symlink: /usr/bin/kill -> busybox
    adding symlink: /usr/bin/killall -> busybox
    adding symlink: /usr/bin/less -> busybox
    adding symlink: /usr/bin/link -> busybox
    adding symlink: /usr/bin/ln -> busybox
    adding symlink: /usr/bin/loadfont -> busybox
    adding symlink: /usr/bin/loadkmap -> busybox
    adding symlink: /usr/bin/losetup -> busybox
    adding symlink: /usr/bin/ls -> busybox
    adding symlink: /usr/bin/lsscsi -> busybox
    adding symlink: /usr/bin/lzop -> busybox
    adding symlink: /usr/bin/md5sum -> busybox
    adding symlink: /usr/bin/mim -> busybox
    adding symlink: /usr/bin/mkdir -> busybox
    adding symlink: /usr/bin/mkfifo -> busybox
    adding symlink: /usr/bin/mknod -> busybox
    adding symlink: /usr/bin/mkpasswd -> busybox
    adding symlink: /usr/bin/mktemp -> busybox
    adding symlink: /usr/bin/mountpoint -> busybox
    adding symlink: /usr/bin/mv -> busybox
    adding symlink: /usr/bin/nc -> busybox
    adding symlink: /usr/bin/netstat -> busybox
    adding symlink: /usr/bin/nologin -> busybox
    adding symlink: /usr/bin/nproc -> busybox
    adding symlink: /usr/bin/nsenter -> busybox
    adding symlink: /usr/bin/nslookup -> busybox
    adding symlink: /usr/bin/nuke -> busybox
    adding symlink: /usr/bin/openvt -> busybox
    adding symlink: /usr/bin/partprobe -> busybox
    adding symlink: /usr/bin/paste -> busybox
    adding symlink: /usr/bin/pgrep -> busybox
    adding symlink: /usr/bin/pidof -> busybox
    adding symlink: /usr/bin/ping -> busybox
    adding symlink: /usr/bin/ping6 -> busybox
    adding symlink: /usr/bin/poweroff -> busybox
    adding symlink: /usr/bin/printf -> busybox
    adding symlink: /usr/bin/ps -> busybox
    adding symlink: /usr/bin/pwd -> busybox
    adding symlink: /usr/bin/readlink -> busybox
    adding symlink: /usr/bin/realpath -> busybox
    adding symlink: /usr/bin/reboot -> busybox
    adding symlink: /usr/bin/resume -> busybox
    adding symlink: /usr/bin/rm -> busybox
    adding symlink: /usr/bin/rmdir -> busybox
    adding symlink: /usr/bin/route -> busybox
    adding symlink: /usr/bin/run-init -> busybox
    adding symlink: /usr/bin/sed -> busybox
    adding symlink: /usr/bin/seq -> busybox
    adding symlink: /usr/bin/setfattr -> busybox
    adding symlink: /usr/bin/setfont -> busybox
    adding symlink: /usr/bin/sh -> busybox
    adding symlink: /usr/bin/sha1sum -> busybox
    adding symlink: /usr/bin/sha256sum -> busybox
    adding symlink: /usr/bin/sha512sum -> busybox
    adding symlink: /usr/bin/shuf -> busybox
    adding symlink: /usr/bin/sleep -> busybox
    adding symlink: /usr/bin/sort -> busybox
    adding symlink: /usr/bin/stat -> busybox
    adding symlink: /usr/bin/strings -> busybox
    adding symlink: /usr/bin/sync -> busybox
    adding symlink: /usr/bin/tac -> busybox
    adding symlink: /usr/bin/tail -> busybox
    adding symlink: /usr/bin/tar -> busybox
    adding symlink: /usr/bin/tcpsvd -> busybox
    adding symlink: /usr/bin/tee -> busybox
    adding symlink: /usr/bin/telnet -> busybox
    adding symlink: /usr/bin/test -> busybox
    adding symlink: /usr/bin/tftp -> busybox
    adding symlink: /usr/bin/touch -> busybox
    adding symlink: /usr/bin/true -> busybox
    adding symlink: /usr/bin/truncate -> busybox
    adding symlink: /usr/bin/ts -> busybox
    adding symlink: /usr/bin/udhcpc -> busybox
    adding symlink: /usr/bin/udhcpc6 -> busybox
    adding symlink: /usr/bin/umount -> busybox
    adding symlink: /usr/bin/uname -> busybox
    adding symlink: /usr/bin/uniq -> busybox
    adding symlink: /usr/bin/unlink -> busybox
    adding symlink: /usr/bin/unshare -> busybox
    adding symlink: /usr/bin/unzip -> busybox
    adding symlink: /usr/bin/uptime -> busybox
    adding symlink: /usr/bin/vi -> busybox
    adding symlink: /usr/bin/wc -> busybox
    adding symlink: /usr/bin/wget -> busybox
    adding symlink: /usr/bin/which -> busybox
    adding symlink: /usr/bin/xxd -> busybox
    adding symlink: /usr/bin/xz -> busybox
    adding symlink: /usr/bin/yes -> busybox
    adding file: /usr/bin/kmod
    adding file: /usr/lib/libzstd.so.1.5.5
    adding symlink: /usr/lib/libzstd.so.1 -> libzstd.so.1.5.5
    adding file: /usr/lib/liblzma.so.5.4.3
    adding symlink: /usr/lib/liblzma.so.5 -> liblzma.so.5.4.3
    adding file: /usr/lib/libz.so.1.2.13
    adding symlink: /usr/lib/libz.so.1 -> libz.so.1.2.13
    adding file: /usr/lib/libcrypto.so.3
    adding file: /usr/lib/libgcc_s.so.1
    adding symlink: /usr/bin/depmod -> kmod
    adding symlink: /usr/bin/insmod -> kmod
    adding symlink: /usr/bin/rmmod -> kmod
    adding symlink: /usr/bin/lsmod -> kmod
    adding symlink: /usr/bin/modprobe -> kmod
    adding symlink: /usr/bin/modinfo -> kmod
    adding file: /usr/bin/blkid
    adding file: /usr/lib/libblkid.so.1.1.0
    adding symlink: /usr/lib/libblkid.so.1 -> libblkid.so.1.1.0
    adding file: /usr/bin/mount
    adding file: /usr/lib/libmount.so.1.1.0
    adding symlink: /usr/lib/libmount.so.1 -> libmount.so.1.1.0
    adding file: /usr/bin/switch_root
    adding file: /init_functions
    adding file: /init
  -> Running build hook: [/usr/lib/initcpio/install/udev]
    adding file: /usr/bin/udevadm
    adding dir: /usr/lib/systemd
    adding symlink: /usr/lib/systemd/systemd-udevd -> /usr/bin/udevadm
    adding file: /usr/lib/systemd/libsystemd-shared-253.4-1.so
    adding file: /usr/lib/libkmod.so.2.4.0
    adding symlink: /usr/lib/libkmod.so.2 -> libkmod.so.2.4.0
    adding file: /usr/lib/libacl.so.1.1.2301
    adding symlink: /usr/lib/libacl.so.1 -> libacl.so.1.1.2301
    adding file: /usr/lib/libcap.so.2.69
    adding symlink: /usr/lib/libcap.so.2 -> libcap.so.2.69
    adding file: /usr/lib/libgcrypt.so.20.4.2
    adding symlink: /usr/lib/libgcrypt.so.20 -> libgcrypt.so.20.4.2
    adding file: /usr/lib/libip4tc.so.2.0.0
    adding symlink: /usr/lib/libip4tc.so.2 -> libip4tc.so.2.0.0
    adding file: /usr/lib/liblz4.so.1.9.4
    adding symlink: /usr/lib/liblz4.so.1 -> liblz4.so.1.9.4
    adding file: /usr/lib/libpam.so.0.85.1
    adding symlink: /usr/lib/libpam.so.0 -> libpam.so.0.85.1
    adding file: /usr/lib/libseccomp.so.2.5.4
    adding symlink: /usr/lib/libseccomp.so.2 -> libseccomp.so.2.5.4
    adding file: /usr/lib/libm.so.6
    adding file: /usr/lib/libgpg-error.so.0.34.0
    adding symlink: /usr/lib/libgpg-error.so.0 -> libgpg-error.so.0.34.0
    adding file: /usr/lib/libaudit.so.1.0.0
    adding symlink: /usr/lib/libaudit.so.1 -> libaudit.so.1.0.0
    adding file: /usr/lib/libcap-ng.so.0.0.0
    adding symlink: /usr/lib/libcap-ng.so.0 -> libcap-ng.so.0.0.0
    overwriting file: /usr/bin/udevadm
    adding file: /usr/bin/systemd-tmpfiles
    adding dir: /usr/lib/udev/rules.d
    adding file: /usr/lib/udev/rules.d/50-udev-default.rules
    adding file: /usr/lib/udev/rules.d/60-persistent-storage.rules
    adding file: /usr/lib/udev/ata_id
    overwriting file: /usr/lib/udev/ata_id
    overwriting file: /usr/lib/udev/ata_id
    adding file: /usr/lib/udev/scsi_id
    overwriting file: /usr/lib/udev/scsi_id
    adding file: /usr/lib/udev/rules.d/64-btrfs.rules
    overwriting file: /usr/bin/udevadm
    adding file: /usr/lib/udev/rules.d/80-drivers.rules
    overwriting file: /usr/lib/udev/ata_id
    overwriting file: /usr/lib/udev/scsi_id
    adding file: /hooks/udev
  -> Running build hook: [/usr/lib/initcpio/install/modconf]
    adding dir: /etc/modprobe.d
    adding dir: /usr/lib/modprobe.d
    adding file: /usr/lib/modprobe.d/bluetooth-usb.conf
    adding file: /usr/lib/modprobe.d/nvdimm-security.conf
    adding file: /usr/lib/modprobe.d/systemd.conf
  -> Running build hook: [/usr/lib/initcpio/install/kms]
  -> Running build hook: [/usr/lib/initcpio/install/keyboard]
    adding module: usbhid (/lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid/usbhid.ko.zst)
  -> Running build hook: [/usr/lib/initcpio/install/keymap]
    adding file: /hooks/keymap
  -> Running build hook: [/usr/lib/initcpio/install/consolefont]
==> WARNING: consolefont: no font found in configuration
  -> Running build hook: [/usr/lib/initcpio/install/block]
    adding module: sr_mod (/lib/modules/6.3.4-arch1-1/kernel/drivers/scsi/sr_mod.ko.zst)
    adding module: cdrom (/lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom/cdrom.ko.zst)
    adding module: usb-storage (/lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage/usb-storage.ko.zst)
    adding module: mmc_block (/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_block.ko.zst)
    adding module: mmc_core (/lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_core.ko.zst)
    adding module: firewire-sbp2 (/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-sbp2.ko.zst)
    adding module: firewire-core (/lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-core.ko.zst)
    adding module: crc-itu-t (/lib/modules/6.3.4-arch1-1/kernel/lib/crc-itu-t.ko.zst)
    adding module: virtio_blk (/lib/modules/6.3.4-arch1-1/kernel/drivers/block/virtio_blk.ko.zst)
  -> Running build hook: [/usr/lib/initcpio/install/filesystems]
  -> Running build hook: [/usr/lib/initcpio/install/resume]
    adding file: /hooks/resume
  -> Running build hook: [/usr/lib/initcpio/install/fsck]
    adding file: /usr/bin/fsck.xfs
    adding file: /usr/bin/xfs_repair
    adding file: /usr/lib/libuuid.so.1.3.0
    adding symlink: /usr/lib/libuuid.so.1 -> libuuid.so.1.3.0
    adding file: /usr/lib/liburcu.so.8.1.0
    adding symlink: /usr/lib/liburcu.so.8 -> liburcu.so.8.1.0
    adding file: /usr/lib/liburcu-common.so.8.1.0
    adding symlink: /usr/lib/liburcu-common.so.8 -> liburcu-common.so.8.1.0
    adding file: /usr/bin/e2fsck
    adding file: /usr/lib/libext2fs.so.2.4
    adding symlink: /usr/lib/libext2fs.so.2 -> libext2fs.so.2.4
    adding file: /usr/lib/libcom_err.so.2.1
    adding symlink: /usr/lib/libcom_err.so.2 -> libcom_err.so.2.1
    adding file: /usr/lib/libe2p.so.2.3
    adding symlink: /usr/lib/libe2p.so.2 -> libe2p.so.2.3
    adding symlink: /usr/bin/fsck.ext2 -> e2fsck
    adding symlink: /usr/bin/fsck.ext3 -> e2fsck
    adding symlink: /usr/bin/fsck.ext4 -> e2fsck
    overwriting file: /usr/bin/e2fsck
    overwriting symlink /usr/bin/fsck.ext2 -> e2fsck
    overwriting symlink /usr/bin/fsck.ext3 -> e2fsck
    overwriting symlink /usr/bin/fsck.ext4 -> e2fsck
    adding file: /usr/bin/fsck.fat
    adding symlink: /usr/bin/fsck.msdos -> fsck.fat
    adding file: /usr/bin/fsck.minix
    overwriting file: /usr/bin/fsck.fat
    adding symlink: /usr/bin/fsck.vfat -> fsck.fat
    overwriting file: /usr/bin/fsck.fat
    adding file: /usr/bin/fsck.btrfs
    overwriting file: /usr/bin/e2fsck
    overwriting symlink /usr/bin/fsck.ext2 -> e2fsck
    overwriting symlink /usr/bin/fsck.ext3 -> e2fsck
    overwriting symlink /usr/bin/fsck.ext4 -> e2fsck
    adding file: /usr/bin/exfatfsck
    adding symlink: /usr/bin/fsck.exfat -> exfatfsck
    adding file: /usr/bin/fsck.cramfs
    adding file: /usr/bin/fsck
    adding module: nvme (/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme.ko.zst)
    adding module: nvme-core (/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme-core.ko.zst)
    adding module: nvme-common (/lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common/nvme-common.ko.zst)
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/firewire
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-sbp2.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/common/nvme-common.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_block.ko.zst
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/firewire/firewire-core.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/lib
    adding file: /lib/modules/6.3.4-arch1-1/kernel/lib/crc-itu-t.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme-core.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/block
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/block/virtio_blk.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/cdrom/cdrom.ko.zst
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/mmc/core/mmc_core.ko.zst
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/nvme/host/nvme.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/hid/usbhid/usbhid.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/scsi
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/scsi/sr_mod.ko.zst
    adding dir: /lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage
    adding file: /lib/modules/6.3.4-arch1-1/kernel/drivers/usb/storage/usb-storage.ko.zst
==> Generating module dependencies
    adding file: /lib/modules/6.3.4-arch1-1/modules.builtin
    adding file: /lib/modules/6.3.4-arch1-1/modules.builtin.modinfo
    adding file: /lib/modules/6.3.4-arch1-1/modules.order
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-fallback.img'
==> Image generation successful

Offline

#47 2023-05-28 21:11:24

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

find: ‘sort’ terminated by signal 13
modprobe: ERROR: missing parameters. See -h.
pacman -Qkk mkinitcpio util-linux findutils

Edit: 

pacman -Qkk awk

Last edited by seth (2023-05-28 21:13:15)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#48 2023-05-28 21:20:05

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

# pacman --sysroot /mnt -Qkk mkinitcpio util-linux findutils awk
error: package 'awk' was not found
backup file: mkinitcpio: /etc/mkinitcpio.conf (Modification time mismatch)
backup file: mkinitcpio: /etc/mkinitcpio.conf (Size mismatch)
backup file: mkinitcpio: /etc/mkinitcpio.conf (MD5 checksum mismatch)
backup file: mkinitcpio: /etc/mkinitcpio.conf (SHA256 checksum mismatch)
mkinitcpio: 83 total files, 0 altered files
util-linux: 489 total files, 0 altered files
findutils: 132 total files, 0 altered files

Offline

#49 2023-05-28 21:21:27

seth
Member
Registered: 2012-09-03
Posts: 66,162

Re: [Solved] Failed to mount /boot

"gawk", sorry

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#50 2023-05-28 21:27:20

RogerRabbit
Member
Registered: 2022-12-18
Posts: 68

Re: [Solved] Failed to mount /boot

# pacman --sysroot /mnt -Qkk gawk
error: error while reading file /var/lib/pacman/local/gawk-5.2.2-1/mtree: Unrecognized archive format
gawk: no mtree file

Offline

Pages: 1 2 3

Board footer

Powered by FluxBB