You are not logged in.

#1 2024-04-23 07:14:03

Harkonnen
Member
Registered: 2013-03-24
Posts: 20

SPDIF stops working after a few days uptime

Hi all,

I have a new computer which I have configured by just "transplanting" the old HD into the new hardware. Almost everything is working as intended, except for the SPDIF output, which works until it doesn't anymore. The old hardware worked flawlessly.

For context, my computer is on 24h/day. When I reboot the machine, everything works flawlessly. Then, after ~3 days of uptime the SPDIF output will go rogue: everything appears to work, the PA control graphically shows sound being played through the output, etc., just nothing comes out. Rebooting the computer makes it work for a new cycle.

I am assuming this has something to do with the sound card driver, which enables some kind of energy saving mode from which it is incapable of recovering. In fact, each time sound starts playing it takes a couple of seconds to come out, as if the card had been turned off and needed to restart again.

This is the card info from pactl list cards:

Card #1
        Name: alsa_card.usb-Generic_USB_Audio-00
        Driver: module-alsa-card.c
        Owner Module: 7
        Properties:
                alsa.card = "2"
                alsa.card_name = "USB Audio"
                alsa.long_card_name = "Generic USB Audio at usb-0000:10:00.0-6, high speed"
                alsa.driver_name = "snd_usb_audio"
                device.bus_path = "pci-0000:10:00.0-usb-0:6:1.0"
                sysfs.path = "/devices/pci0000:00/0000:00:02.1/0000:03:00.0/0000:04:0c.0/0000:10:00.0/usb3/3-6/3-6:1.0/sound/card2"
                udev.id = "usb-Generic_USB_Audio-00"
                device.bus = "usb"
                device.vendor.id = "0b05"
                device.vendor.name = "ASUSTek Computer, Inc."
                device.product.id = "1a52"
                device.product.name = "USB Audio"
                device.serial = "Generic_USB_Audio"
                device.string = "2"
                device.description = "USB Audio"
                module-udev-detect.discovered = "1"
                device.icon_name = "audio-card-usb"
        Profiles:
                HiFi 7+1: HiFi 7.1 channels (sinks: 3, sources: 2, priority: 1000, available: yes)
                HiFi 5+1: HiFi 5.1 channels (sinks: 3, sources: 2, priority: 1000, available: yes)
                HiFi: HiFi 2.0 channels (sinks: 3, sources: 2, priority: 9000, available: yes)
                off: Apagado (sinks: 0, sources: 0, priority: 0, available: yes)
        Active Profile: HiFi 5+1
        Ports:
                [Out] SPDIF: S/PDIF Output (type: SPDIF, priority: 100, latency offset: 0 usec, availability unknown)
                        Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
                [Out] Headphones: Front Headphones (type: Headphones, priority: 300, latency offset: 0 usec, not available)
                        Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
                [Out] Speaker: Speakers (type: Speaker, priority: 200, latency offset: 0 usec, not available)
                        Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
                [In] Mic1: Microphone (type: Mic, priority: 300, latency offset: 0 usec, not available)
                        Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi
                [In] Line1: Line Input (type: Line, priority: 100, latency offset: 0 usec, not available)
                        Part of profile(s): HiFi 7+1, HiFi 5+1, HiFi

Offline

Board footer

Powered by FluxBB