Arch Linux

Za Fyuri

Member

Registered: 2024-07-02

Posts: 16

Re: Slow Boot Time

Sorry for the delayed response. I dug into it more and found the following:

[    6.910678] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    6.910685] thinkpad_acpi: http://ibm-acpi.sf.net/
[    6.910687] thinkpad_acpi: ThinkPad BIOS R1CET79W(1.48 ), EC R1CHT79W
[    6.910690] thinkpad_acpi: Lenovo ThinkPad X13 Gen 1, model 20UGS27F00
[    6.911305] thinkpad_acpi: radio switch found; radios are enabled
[    6.911316] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    6.911319] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    6.915052] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    6.929891] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    6.950690] thinkpad_acpi: secondary fan control detected & enabled
[    6.960060] thinkpad_acpi: battery 1 registered (start 95, stop 100, behaviours: 0x7)
[    6.960098] ACPI: battery: new extension: ThinkPad Battery Extension
[    6.976833] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    7.320365] tsc: Refined TSC clocksource calibration: 2495.310 MHz
[    7.320386] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f7eb13dd7, max_idle_ns: 440795202126 ns
[    7.323680] clocksource: Switched to clocksource tsc
[    7.621426] xhci_hcd 0000:05:00.0: Timeout for Set DATAX step: 34
[    7.621552] xhci_hcd 0000:05:00.0: ROM Download Step 34 failed at position 136 bytes with (-110)
[    8.037407] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    8.037430] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[    8.037458] xhci_hcd 0000:05:00.0: Zeroing 64bit base registers, expecting fault
[    8.155916] xhci_hcd 0000:05:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000090
[    8.156497] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    8.156502] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    8.156508] xhci_hcd 0000:05:00.0: Host supports USB 3.0 SuperSpeed
[    8.159670] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    8.159675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.159679] usb usb2: Product: xHCI Host Controller
[    8.159682] usb usb2: Manufacturer: Linux 6.10.6-arch1-1 xhci-hcd
[    8.159685] usb usb2: SerialNumber: 0000:05:00.0
[    8.160002] hub 2-0:1.0: USB hub found
[    8.160044] hub 2-0:1.0: 2 ports detected
[    8.160423] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.160499] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
[    8.160504] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.160507] usb usb3: Product: xHCI Host Controller
[    8.160511] usb usb3: Manufacturer: Linux 6.10.6-arch1-1 xhci-hcd
[    8.160514] usb usb3: SerialNumber: 0000:05:00.0
[    8.160721] hub 3-0:1.0: USB hub found
[    8.160742] hub 3-0:1.0: 2 ports detected
[    8.161231] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    8.161242] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 4
[    8.161349] xhci_hcd 0000:06:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
[    8.161812] xhci_hcd 0000:06:00.3: xHCI Host Controller
[    8.161818] xhci_hcd 0000:06:00.3: new USB bus registered, assigned bus number 5
[    8.161822] xhci_hcd 0000:06:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[    8.161921] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    8.161926] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.161929] usb usb4: Product: xHCI Host Controller
[    8.161932] usb usb4: Manufacturer: Linux 6.10.6-arch1-1 xhci-hcd
[    8.161935] usb usb4: SerialNumber: 0000:06:00.3
[    8.162168] hub 4-0:1.0: USB hub found
[    8.162190] hub 4-0:1.0: 4 ports detected
[    8.162743] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.162810] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
[    8.162814] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.162817] usb usb5: Product: xHCI Host Controller
[    8.162820] usb usb5: Manufacturer: Linux 6.10.6-arch1-1 xhci-hcd
[    8.162823] usb usb5: SerialNumber: 0000:06:00.3
[    8.162990] hub 5-0:1.0: USB hub found
[    8.163006] hub 5-0:1.0: 2 ports detected
[    8.163555] xhci_hcd 0000:06:00.4: xHCI Host Controller
[    8.163564] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 6
[    8.163667] xhci_hcd 0000:06:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
[    8.164146] xhci_hcd 0000:06:00.4: xHCI Host Controller
[    8.164153] xhci_hcd 0000:06:00.4: new USB bus registered, assigned bus number 7
[    8.164159] xhci_hcd 0000:06:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[    8.164266] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[    8.164270] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.164273] usb usb6: Product: xHCI Host Controller
[    8.164276] usb usb6: Manufacturer: Linux 6.10.6-arch1-1 xhci-hcd
[    8.164279] usb usb6: SerialNumber: 0000:06:00.4
[    8.164485] hub 6-0:1.0: USB hub found
[    8.164525] hub 6-0:1.0: 4 ports detected
[    8.165086] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.165153] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10
[    8.165158] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.165161] usb usb7: Product: xHCI Host Controller
[    8.165164] usb usb7: Manufacturer: Linux 6.10.6-arch1-1 xhci-hcd
[    8.165167] usb usb7: SerialNumber: 0000:06:00.4
[    8.165362] hub 7-0:1.0: USB hub found
[    8.165381] hub 7-0:1.0: 2 ports detected
[    8.410379] usb 2-2: new high-speed USB device number 2 using xhci_hcd
[    8.417046] usb 6-4: new high-speed USB device number 2 using xhci_hcd
[    8.560632] usb 6-4: New USB device found, idVendor=0489, idProduct=e0cd, bcdDevice= 1.00
[    8.560644] usb 6-4: New USB device strings: Mfr=5, Product=6, SerialNumber=7
[    8.560650] usb 6-4: Product: Wireless_Device
[    8.560656] usb 6-4: Manufacturer: MediaTek Inc.
[    8.560661] usb 6-4: SerialNumber: 000000000
[    8.565507] usb 2-2: New USB device found, idVendor=5986, idProduct=2130, bcdDevice=56.09
[    8.565516] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.565519] usb 2-2: Product: Integrated Camera
[    8.565522] usb 2-2: Manufacturer: SunplusIT Inc

I ran dmesg to get the information, let me know if you need anything else. Sorry for the delay again.

seth

Member

From: Don't DM me only for attention

Registered: 2012-09-03

Posts: 68,382

Re: Slow Boot Time

https://bbs.archlinux.org/viewtopic.php?id=293325 ??

Edit, from your journal

Aug 13 23:05:02 archnomad kernel: xhci_hcd 0000:05:00.0: failed to load firmware renesas_usb_fw.mem, fallback to ROM

so likely relevant.

Last edited by seth (2024-08-29 07:01:02)

---

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Za Fyuri

Member

Registered: 2024-07-02

Posts: 16

Re: Slow Boot Time

https://bbs.archlinux.org/viewtopic.php?id=293325 ??

Edit, from your journal

Aug 13 23:05:02 archnomad kernel: xhci_hcd 0000:05:00.0: failed to load firmware renesas_usb_fw.mem, fallback to ROM

so likely relevant.

This fixed it the error message. Thank you. The only one I get now is the AMD Display error but that doesn't bug me enough. Boot time is 15 seconds, so all good.
Thank you for your help with this and guidance, its really appreciated.