You are not logged in.
- Topics: Active | Unanswered
#1 2024-02-26 13:58:27
- thrimbor
- Member
- Registered: 2024-02-26
- Posts: 6
Mouse location issue and no clicking on KDE Wayland
Hi,
For a while now I'm having a strange issue with my Arch Linux installation on my PC that I haven't seen described anywhere before (what I did find was mostly related to mouse gestures which I don't use).
The following happens:
When I boot up my PC and log in, I can see and move the mouse pointer just fine, but it doesn't appear to change properly like it should (like when moving over a window border, or over text in konsole). No mouse-over effects appear when moving the mouse over the X-button to close windows, or on notifications, or when moving it over icons in the panel at the bottom of my screen.
Instead, it looks like the mouse pointer is "going through" application windows. When I move the mouse over the top of the Steam window, I can see icons on my Desktop getting highlighted like if the Steam window wasn't even there.
Mouse clicks don't work at all. They do get registered, but not by the application the pointer is over - when I click on the konsole window, it loses focus. The clicks don't appear to get registered by the Desktop either, they just seem to go nowhere.
What is really strange is that the Launcher menu doesn't work either. I can't bring it up with the Windows-Key on my keyboard. ALT+F2 still works though.
So far I know this:
* It's not an issue with the mouse itself - it appeared with my Sharkoon Drakonia Black, and with the Cyborg R.A.T.3 I'm using right now
* I can almost always "fix" it by re-plugging the mouse - the first time mouse-over effects start working, the second time clicks start working
* Sometimes it requires re-plugging more than twice
* It doesn't appear to be an issue with the USB-port, I can re-plug it in the same port and it starts working. The mouse is currently plugged into the Logitech G19's port, but it also happened with the Drakonia plugged directly into the PC.
* The mouse events (movement and clicks) appear in evtest (this is what makes me suspect it's a KDE issue)
* It does not appear on my laptop (using the touchpad)
My PC setup is as follows:
OS: Arch Linux, fully updated, with nvidia and vmware kernel modules
CPU: Intel i7 4790k
RAM: 32GiB
Mainboard: Gigabyte Z97X-SLI
GPU: ASUS GTX 1070 Strix
Keyboard: Logitech G19
Mouse: Saitek Cyborg R.A.T.3
Desktop env: KDE on Wayland
Autostarting applications: Steam, Nextcloud, syncthingtray (AUR)
dmesg:
[ 0.000000] Linux version 6.7.6-arch1-1 (linux@archlinux) (gcc (GCC) 13.2.1 20230801, GNU ld (GNU Binutils) 2.42.0) #1 SMP PREEMPT_DYNAMIC Fri, 23 Feb 2024 16:31:48 +0000
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX rw quiet nvidia-drm.modeset=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be3cdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be3ce000-0x00000000be3d4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be3d5000-0x00000000bee94fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bee95000-0x00000000bf394fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf395000-0x00000000dcc0cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dcc0d000-0x00000000dcc9dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dcc9e000-0x00000000dccfafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dccfb000-0x00000000dce48fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dce49000-0x00000000def48fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000def49000-0x00000000deffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable
[ 0.000000] The simpledrm driver will not be probed
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] efi: EFI v2.3.1 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xdce0e000 ACPI=0xdce0e000 SMBIOS=0xdef47518
[ 0.000000] efi: Remove mem67: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[ 0.000000] efi: Not removing mem68: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem69: MMIO range=[0xfed00000-0xfed03fff] (16KB) from e820 map
[ 0.000000] efi: Not removing mem70: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map
[ 0.000000] efi: Not removing mem71: MMIO range=[0xfee00000-0xfee00fff] (4KB) from e820 map
[ 0.000000] efi: Remove mem72: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. Z97X-SLI/Z97X-SLI-CF, BIOS F7 10/17/2014
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4000.356 MHz processor
[ 0.000080] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000081] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000087] last_pfn = 0x81f000 max_arch_pfn = 0x400000000
[ 0.000091] total RAM covered: 32752M
[ 0.000190] Found optimal setting for mtrr clean up
[ 0.000190] gran_size: 64K chunk_size: 32M num_reg: 8 lose cover RAM: 0G
[ 0.000193] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
[ 0.000194] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000476] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000479] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.005430] Using GB pages for direct mapping
[ 0.005740] Secure boot could not be determined
[ 0.005741] RAMDISK: [mem 0x2b031000-0x3180ffff]
[ 0.005744] ACPI: Early table checksum verification disabled
[ 0.005746] ACPI: RSDP 0x00000000DCE0E000 000024 (v02 ALASKA)
[ 0.005749] ACPI: XSDT 0x00000000DCE0E080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005753] ACPI: FACP 0x00000000DCE1EBE0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.005757] ACPI: DSDT 0x00000000DCE0E1A0 010A3E (v02 ALASKA A M I 00000088 INTL 20120711)
[ 0.005759] ACPI: FACS 0x00000000DCE47080 000040
[ 0.005761] ACPI: APIC 0x00000000DCE1ECF0 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.005763] ACPI: FPDT 0x00000000DCE1ED88 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.005765] ACPI: SSDT 0x00000000DCE1EDD0 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.005767] ACPI: SSDT 0x00000000DCE1F9C0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.005769] ACPI: SSDT 0x00000000DCE1FF00 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.005771] ACPI: MCFG 0x00000000DCE20A78 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.005773] ACPI: HPET 0x00000000DCE20AB8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.005775] ACPI: SSDT 0x00000000DCE20AF0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.005777] ACPI: SSDT 0x00000000DCE20E60 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.005779] ACPI: BGRT 0x00000000DCE269C0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.005781] ACPI: DMAR 0x00000000DCE269F8 000070 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.005783] ACPI: Reserving FACP table memory at [mem 0xdce1ebe0-0xdce1eceb]
[ 0.005784] ACPI: Reserving DSDT table memory at [mem 0xdce0e1a0-0xdce1ebdd]
[ 0.005785] ACPI: Reserving FACS table memory at [mem 0xdce47080-0xdce470bf]
[ 0.005785] ACPI: Reserving APIC table memory at [mem 0xdce1ecf0-0xdce1ed81]
[ 0.005786] ACPI: Reserving FPDT table memory at [mem 0xdce1ed88-0xdce1edcb]
[ 0.005786] ACPI: Reserving SSDT table memory at [mem 0xdce1edd0-0xdce1f9bd]
[ 0.005787] ACPI: Reserving SSDT table memory at [mem 0xdce1f9c0-0xdce1fef8]
[ 0.005787] ACPI: Reserving SSDT table memory at [mem 0xdce1ff00-0xdce20a73]
[ 0.005788] ACPI: Reserving MCFG table memory at [mem 0xdce20a78-0xdce20ab3]
[ 0.005788] ACPI: Reserving HPET table memory at [mem 0xdce20ab8-0xdce20aef]
[ 0.005789] ACPI: Reserving SSDT table memory at [mem 0xdce20af0-0xdce20e5c]
[ 0.005789] ACPI: Reserving SSDT table memory at [mem 0xdce20e60-0xdce269bd]
[ 0.005790] ACPI: Reserving BGRT table memory at [mem 0xdce269c0-0xdce269f7]
[ 0.005790] ACPI: Reserving DMAR table memory at [mem 0xdce269f8-0xdce26a67]
[ 0.005829] No NUMA configuration found
[ 0.005829] Faking a node at [mem 0x0000000000000000-0x000000081effffff]
[ 0.005831] NODE_DATA(0) allocated [mem 0x81eff9000-0x81effdfff]
[ 0.005859] Zone ranges:
[ 0.005859] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.005861] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.005862] Normal [mem 0x0000000100000000-0x000000081effffff]
[ 0.005863] Device empty
[ 0.005863] Movable zone start for each node
[ 0.005864] Early memory node ranges
[ 0.005864] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.005865] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.005866] node 0: [mem 0x0000000000100000-0x00000000be3cdfff]
[ 0.005866] node 0: [mem 0x00000000be3d5000-0x00000000bee94fff]
[ 0.005867] node 0: [mem 0x00000000bf395000-0x00000000dcc0cfff]
[ 0.005867] node 0: [mem 0x00000000dcc9e000-0x00000000dccfafff]
[ 0.005868] node 0: [mem 0x00000000defff000-0x00000000deffffff]
[ 0.005868] node 0: [mem 0x0000000100000000-0x000000081effffff]
[ 0.005871] Initmem setup node 0 [mem 0x0000000000001000-0x000000081effffff]
[ 0.005873] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.005874] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.005890] On node 0, zone DMA: 98 pages in unavailable ranges
[ 0.010328] On node 0, zone DMA32: 7 pages in unavailable ranges
[ 0.011053] On node 0, zone DMA32: 1280 pages in unavailable ranges
[ 0.011056] On node 0, zone DMA32: 145 pages in unavailable ranges
[ 0.011119] On node 0, zone DMA32: 8964 pages in unavailable ranges
[ 0.054970] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.055001] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.055073] ACPI: PM-Timer IO Port: 0x1808
[ 0.055079] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.055087] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.055089] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.055091] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.055093] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.055094] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.055100] e820: update [mem 0xd986d000-0xd98b1fff] usable ==> reserved
[ 0.055109] TSC deadline timer available
[ 0.055110] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.055122] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.055123] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.055124] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.055125] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.055126] PM: hibernation: Registered nosave memory: [mem 0xbe3ce000-0xbe3d4fff]
[ 0.055127] PM: hibernation: Registered nosave memory: [mem 0xbee95000-0xbf394fff]
[ 0.055128] PM: hibernation: Registered nosave memory: [mem 0xd986d000-0xd98b1fff]
[ 0.055129] PM: hibernation: Registered nosave memory: [mem 0xdcc0d000-0xdcc9dfff]
[ 0.055130] PM: hibernation: Registered nosave memory: [mem 0xdccfb000-0xdce48fff]
[ 0.055130] PM: hibernation: Registered nosave memory: [mem 0xdce49000-0xdef48fff]
[ 0.055131] PM: hibernation: Registered nosave memory: [mem 0xdef49000-0xdeffefff]
[ 0.055132] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xfebfffff]
[ 0.055132] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.055133] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.055133] PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.055134] PM: hibernation: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.055134] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.055135] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.055135] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.055135] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffffffff]
[ 0.055137] [mem 0xdf000000-0xfebfffff] available for PCI devices
[ 0.055138] Booting paravirtualized kernel on bare hardware
[ 0.055139] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.058781] setup_percpu: NR_CPUS:320 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.059085] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144
[ 0.059090] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152
[ 0.059091] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.059105] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX rw quiet nvidia-drm.modeset=1
[ 0.059149] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-linux", will be passed to user space.
[ 0.059169] random: crng init done
[ 0.062213] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.063745] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.063839] Fallback order for Node 0: 0
[ 0.063842] Built 1 zonelists, mobility grouping on. Total pages: 8238982
[ 0.063843] Policy zone: Normal
[ 0.064078] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.064084] software IO TLB: area num 8.
[ 0.140546] Memory: 32624248K/33479680K available (16384K kernel code, 2115K rwdata, 12844K rodata, 3408K init, 3888K bss, 855172K reserved, 0K cma-reserved)
[ 0.140710] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.140718] Kernel/User page tables isolation: enabled
[ 0.140743] ftrace: allocating 48513 entries in 190 pages
[ 0.146549] ftrace: allocated 190 pages with 6 groups
[ 0.146607] Dynamic Preempt: full
[ 0.146639] rcu: Preemptible hierarchical RCU implementation.
[ 0.146640] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[ 0.146640] rcu: RCU priority boosting: priority 1 delay 500 ms.
[ 0.146641] Trampoline variant of Tasks RCU enabled.
[ 0.146641] Rude variant of Tasks RCU enabled.
[ 0.146641] Tracing variant of Tasks RCU enabled.
[ 0.146642] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.146642] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.148328] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[ 0.148494] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.148598] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.148617] Console: colour dummy device 80x25
[ 0.148619] printk: legacy console [tty0] enabled
[ 0.148649] ACPI: Core revision 20230628
[ 0.148720] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.148730] APIC: Switch to symmetric I/O mode setup
[ 0.148731] DMAR: Host address width 39
[ 0.148732] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.148735] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.148736] DMAR: RMRR base: 0x000000dee8c000 end: 0x000000dee9afff
[ 0.148738] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed90000 IOMMU 0
[ 0.148739] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.148740] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.148740] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.148978] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.148979] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.149363] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.165396] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a9aca6a7e, max_idle_ns: 440795289366 ns
[ 0.165399] Calibrating delay loop (skipped), value calculated using timer frequency.. 8003.07 BogoMIPS (lpj=13334520)
[ 0.165415] CPU0: Thermal monitoring enabled (TM1)
[ 0.165436] process: using mwait in idle threads
[ 0.165438] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.165439] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.165441] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.165442] Spectre V2 : Mitigation: Retpolines
[ 0.165443] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.165443] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.165444] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.165445] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.165445] Spectre V2 : User space: Mitigation: STIBP via prctl
[ 0.165446] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.165448] MDS: Mitigation: Clear CPU buffers
[ 0.165449] MMIO Stale Data: Unknown: No mitigations
[ 0.165449] SRBDS: Mitigation: Microcode
[ 0.165452] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.165453] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.165454] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.165455] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.165455] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.177594] Freeing SMP alternatives memory: 40K
[ 0.177596] pid_max: default: 32768 minimum: 301
[ 0.178751] LSM: initializing lsm=capability,landlock,lockdown,yama,bpf,integrity
[ 0.178767] landlock: Up and running.
[ 0.178768] Yama: becoming mindful.
[ 0.178772] LSM support for eBPF active
[ 0.178805] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.178827] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.182098] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.182198] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.182206] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.182216] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1.
[ 0.182225] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.182248] ... version: 3
[ 0.182248] ... bit width: 48
[ 0.182249] ... generic registers: 4
[ 0.182249] ... value mask: 0000ffffffffffff
[ 0.182250] ... max period: 00007fffffffffff
[ 0.182250] ... fixed-purpose events: 3
[ 0.182251] ... event mask: 000000070000000f
[ 0.182326] signal: max sigframe size: 1776
[ 0.182335] Estimated ratio of average max frequency by base frequency (times 1024): 1126
[ 0.183074] rcu: Hierarchical SRCU implementation.
[ 0.183075] rcu: Max phase no-delay instances is 1000.
[ 0.183551] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.183599] smp: Bringing up secondary CPUs ...
[ 0.183653] smpboot: x86: Booting SMP configuration:
[ 0.183654] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.186034] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.186034] smp: Brought up 1 node, 8 CPUs
[ 0.186034] smpboot: Max logical packages: 1
[ 0.186034] smpboot: Total of 8 processors activated (64031.60 BogoMIPS)
[ 0.189413] devtmpfs: initialized
[ 0.189413] x86/mm: Memory block size: 128MB
[ 0.190055] ACPI: PM: Registering ACPI NVS region [mem 0xbe3ce000-0xbe3d4fff] (28672 bytes)
[ 0.190055] ACPI: PM: Registering ACPI NVS region [mem 0xdccfb000-0xdce48fff] (1368064 bytes)
[ 0.190055] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.190055] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.190055] pinctrl core: initialized pinctrl subsystem
[ 0.190055] PM: RTC time: 13:07:30, date: 2024-02-26
[ 0.190055] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.190055] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[ 0.190055] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.190055] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.190055] audit: initializing netlink subsys (disabled)
[ 0.190055] audit: type=2000 audit(1708952850.039:1): state=initialized audit_enabled=0 res=1
[ 0.190055] thermal_sys: Registered thermal governor 'fair_share'
[ 0.190055] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.190055] thermal_sys: Registered thermal governor 'step_wise'
[ 0.190055] thermal_sys: Registered thermal governor 'user_space'
[ 0.190055] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.190055] cpuidle: using governor ladder
[ 0.190055] cpuidle: using governor menu
[ 0.190055] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.190055] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.190055] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.190055] PCI: not using MMCONFIG
[ 0.190055] PCI: Using configuration type 1 for base access
[ 0.192076] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.192217] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.192222] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.192222] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.192222] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.192222] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.192475] ACPI: Added _OSI(Module Device)
[ 0.192476] ACPI: Added _OSI(Processor Device)
[ 0.192477] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.192478] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.205920] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.212343] ACPI: Dynamic OEM Table Load:
[ 0.212347] ACPI: SSDT 0xFFFF9F4801091800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.212600] ACPI: Dynamic OEM Table Load:
[ 0.212603] ACPI: SSDT 0xFFFF9F480109F800 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.213175] ACPI: Dynamic OEM Table Load:
[ 0.213177] ACPI: SSDT 0xFFFF9F4801C4B800 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.214775] ACPI: _OSC evaluated successfully for all CPUs
[ 0.215279] ACPI: Interpreter enabled
[ 0.215299] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.215299] ACPI: Using IOAPIC for interrupt routing
[ 0.215770] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.216953] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved as ACPI motherboard resource
[ 0.216960] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.216961] PCI: Using E820 reservations for host bridge windows
[ 0.217502] ACPI: Enabled 9 GPEs in block 00 to 3F
[ 0.217893] ACPI: \_SB_.PCI0.PEG0.PG00: New power resource
[ 0.218187] ACPI: \_SB_.PCI0.PEG1.PG01: New power resource
[ 0.218441] ACPI: \_SB_.PCI0.PEG2.PG02: New power resource
[ 0.227845] ACPI: \_TZ_.FN00: New power resource
[ 0.227886] ACPI: \_TZ_.FN01: New power resource
[ 0.227925] ACPI: \_TZ_.FN02: New power resource
[ 0.227964] ACPI: \_TZ_.FN03: New power resource
[ 0.228002] ACPI: \_TZ_.FN04: New power resource
[ 0.228448] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.228453] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[ 0.228527] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME]
[ 0.228629] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR DPC]
[ 0.228630] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.229026] PCI host bridge to bus 0000:00
[ 0.229028] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.229029] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.229031] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000effff window]
[ 0.229032] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.229033] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.229043] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.229089] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.229115] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.229330] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[ 0.229344] pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit]
[ 0.229391] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.229455] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[ 0.229469] pci 0000:00:16.0: reg 0x10: [mem 0xf7237000-0xf723700f 64bit]
[ 0.229518] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.229613] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.229624] pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
[ 0.229630] pci 0000:00:19.0: reg 0x14: [mem 0xf7236000-0xf7236fff]
[ 0.229636] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.229681] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.229731] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[ 0.229743] pci 0000:00:1b.0: reg 0x10: [mem 0xf7230000-0xf7233fff 64bit]
[ 0.229793] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.229848] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[ 0.229910] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.230105] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[ 0.230167] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.230365] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[ 0.230507] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[ 0.230516] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.230521] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.230526] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.230531] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.230536] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.230542] pci 0000:00:1f.2: reg 0x24: [mem 0xf7235000-0xf72357ff]
[ 0.230568] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.230613] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[ 0.230626] pci 0000:00:1f.3: reg 0x10: [mem 0xf7234000-0xf72340ff 64bit]
[ 0.230641] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.230713] pci 0000:01:00.0: [10de:1b81] type 00 class 0x030000
[ 0.230722] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.230730] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.230738] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.230744] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.230749] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.230764] pci 0000:01:00.0: BAR 1: assigned to efifb
[ 0.230832] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link)
[ 0.230893] pci 0000:01:00.1: [10de:10f0] type 00 class 0x040300
[ 0.230901] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.230999] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.231001] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.231002] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.231004] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.231054] pci 0000:02:00.0: [144d:a804] type 00 class 0x010802
[ 0.231073] pci 0000:02:00.0: reg 0x10: [mem 0xf7100000-0xf7103fff 64bit]
[ 0.231248] pci 0000:02:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.231394] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.231398] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.231457] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[ 0.231584] pci 0000:03:00.0: supports D1 D2
[ 0.231585] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.231699] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.231741] pci_bus 0000:04: extended config space not accessible
[ 0.231813] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.232535] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.232536] ACPI: PCI: Interrupt link LNKA disabled
[ 0.232569] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.232570] ACPI: PCI: Interrupt link LNKB disabled
[ 0.232602] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.232602] ACPI: PCI: Interrupt link LNKC disabled
[ 0.232634] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.232634] ACPI: PCI: Interrupt link LNKD disabled
[ 0.232665] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.232666] ACPI: PCI: Interrupt link LNKE disabled
[ 0.232697] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.232697] ACPI: PCI: Interrupt link LNKF disabled
[ 0.232729] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.232729] ACPI: PCI: Interrupt link LNKG disabled
[ 0.232760] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.232761] ACPI: PCI: Interrupt link LNKH disabled
[ 0.233021] iommu: Default domain type: Translated
[ 0.233021] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.233021] SCSI subsystem initialized
[ 0.233021] libata version 3.00 loaded.
[ 0.233021] ACPI: bus type USB registered
[ 0.233021] usbcore: registered new interface driver usbfs
[ 0.233021] usbcore: registered new interface driver hub
[ 0.233021] usbcore: registered new device driver usb
[ 0.233021] EDAC MC: Ver: 3.0.0
[ 0.233021] efivars: Registered efivars operations
[ 0.233021] NetLabel: Initializing
[ 0.233021] NetLabel: domain hash size = 128
[ 0.233021] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.233021] NetLabel: unlabeled traffic allowed by default
[ 0.233021] mctp: management component transport protocol core
[ 0.233021] NET: Registered PF_MCTP protocol family
[ 0.233021] PCI: Using ACPI for IRQ routing
[ 0.233317] PCI: pci_cache_line_size set to 64 bytes
[ 0.233344] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.233345] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.233346] e820: reserve RAM buffer [mem 0xbe3ce000-0xbfffffff]
[ 0.233347] e820: reserve RAM buffer [mem 0xbee95000-0xbfffffff]
[ 0.233347] e820: reserve RAM buffer [mem 0xd986d000-0xdbffffff]
[ 0.233348] e820: reserve RAM buffer [mem 0xdcc0d000-0xdfffffff]
[ 0.233349] e820: reserve RAM buffer [mem 0xdccfb000-0xdfffffff]
[ 0.233350] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.233350] e820: reserve RAM buffer [mem 0x81f000000-0x81fffffff]
[ 0.233373] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.233373] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.233373] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.233373] vgaarb: loaded
[ 0.235417] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.235421] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.236438] clocksource: Switched to clocksource tsc-early
[ 0.236789] VFS: Disk quotas dquot_6.6.0
[ 0.236797] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.236834] pnp: PnP ACPI init
[ 0.236902] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.236962] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.236998] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.237107] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.237108] system 00:04: [io 0x0a30-0x0a3f] has been reserved
[ 0.237109] system 00:04: [io 0x0a20-0x0a2f] has been reserved
[ 0.237270] pnp 00:05: [dma 0 disabled]
[ 0.237494] pnp 00:06: [dma 0 disabled]
[ 0.237590] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.237900] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.237902] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.237903] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.237904] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.237905] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.237906] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.237907] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.237908] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.237909] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.237910] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.237911] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.238024] pnp: PnP ACPI: found 9 devices
[ 0.242296] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.242335] NET: Registered PF_INET protocol family
[ 0.242438] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.244340] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.244365] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.244457] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.244716] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.244913] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.244990] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[ 0.245080] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.245131] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.245181] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.245185] NET: Registered PF_XDP protocol family
[ 0.245191] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.245193] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.245195] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.245196] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.245199] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.245201] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.245206] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.245224] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.245231] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.245233] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.245233] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000effff window]
[ 0.245234] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff window]
[ 0.245235] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.245236] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.245237] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.245238] pci_bus 0000:02: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.245433] pci 0000:01:00.1: extending delay after power-on from D3hot to 20 msec
[ 0.245449] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.245457] PCI: CLS 64 bytes, default 64
[ 0.245467] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.245467] software IO TLB: mapped [mem 0x00000000d4fd6000-0x00000000d8fd6000] (64MB)
[ 0.245489] Trying to unpack rootfs image as initramfs...
[ 0.250650] Initialise system trusted keyrings
[ 0.250656] Key type blacklist registered
[ 0.250698] workingset: timestamp_bits=41 max_order=23 bucket_order=0
[ 0.250703] zbud: loaded
[ 0.250802] integrity: Platform Keyring initialized
[ 0.250804] integrity: Machine keyring initialized
[ 0.258959] Key type asymmetric registered
[ 0.258960] Asymmetric key parser 'x509' registered
[ 0.258969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.258994] io scheduler mq-deadline registered
[ 0.258994] io scheduler kyber registered
[ 0.259000] io scheduler bfq registered
[ 0.259399] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.259753] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.260236] ACPI: button: Power Button [PWRB]
[ 0.260258] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.260270] ACPI: button: Sleep Button [SLPB]
[ 0.260286] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.260358] ACPI: button: Power Button [PWRF]
[ 0.260831] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.260833] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.260983] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.260984] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ 0.261093] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.261200] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.263019] Non-volatile memory driver v1.3
[ 0.263020] Linux agpgart interface v0.103
[ 0.263067] ACPI: bus type drm_connector registered
[ 0.263960] ahci 0000:00:1f.2: version 3.0
[ 0.264058] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x6 impl SATA mode
[ 0.264060] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.273872] scsi host0: ahci
[ 0.274044] scsi host1: ahci
[ 0.274120] scsi host2: ahci
[ 0.274194] scsi host3: ahci
[ 0.274218] ata1: DUMMY
[ 0.274220] ata2: SATA max UDMA/133 abar m2048@0xf7235000 port 0xf7235180 irq 28 lpm-pol 0
[ 0.274221] ata3: SATA max UDMA/133 abar m2048@0xf7235000 port 0xf7235200 irq 28 lpm-pol 0
[ 0.274222] ata4: DUMMY
[ 0.274308] usbcore: registered new interface driver usbserial_generic
[ 0.274312] usbserial: USB Serial support registered for generic
[ 0.274373] rtc_cmos 00:02: RTC can wake from S4
[ 0.274563] rtc_cmos 00:02: registered as rtc0
[ 0.274593] rtc_cmos 00:02: setting system clock to 2024-02-26T13:07:30 UTC (1708952850)
[ 0.274611] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.274709] intel_pstate: Intel P-state driver initializing
[ 0.274982] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.275145] efifb: probing for efifb
[ 0.275153] efifb: showing boot graphics
[ 0.276192] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.276193] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.276194] efifb: scrolling: redraw
[ 0.276194] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.276230] fbcon: Deferring console take-over
[ 0.276231] fb0: EFI VGA frame buffer device
[ 0.276242] hid: raw HID events driver (C) Jiri Kosina
[ 0.276303] drop_monitor: Initializing network drop monitor service
[ 0.284294] NET: Registered PF_INET6 protocol family
[ 0.407721] Freeing initrd memory: 106364K
[ 0.411709] Segment Routing with IPv6
[ 0.411710] RPL Segment Routing with IPv6
[ 0.411720] In-situ OAM (IOAM) with IPv6
[ 0.411742] NET: Registered PF_PACKET protocol family
[ 0.412089] microcode: Current revision: 0x00000028
[ 0.412090] microcode: Updated early from: 0x00000019
[ 0.412245] IPI shorthand broadcast: enabled
[ 0.413288] sched_clock: Marking stable (412025940, 209777)->(426044754, -13809037)
[ 0.413401] registered taskstats version 1
[ 0.413620] Loading compiled-in X.509 certificates
[ 0.415530] Loaded X.509 cert 'Build time autogenerated kernel key: bfeef8ffd6928ddff0a8af87181aca0a23cfdfd0'
[ 0.417045] zswap: loaded using pool zstd/zsmalloc
[ 0.418169] Key type .fscrypt registered
[ 0.418170] Key type fscrypt-provisioning registered
[ 0.419679] PM: Magic number: 12:372:130
[ 0.419738] acpi PNP0C02:02: hash matches
[ 0.419742] acpi device:05: hash matches
[ 0.421669] RAS: Correctable Errors collector initialized.
[ 0.421710] clk: Disabling unused clocks
[ 0.587053] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.587066] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.587953] ata2.00: ATA-9: SanDisk SDSSDHII960G, X35510RL, max UDMA/133
[ 0.588031] ata2.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.588232] ata3.00: ATA-9: SanDisk Ultra II 960GB, X41100RL, max UDMA/133
[ 0.588297] ata3.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.589021] ata2.00: Features: Dev-Sleep
[ 0.589589] ata3.00: configured for UDMA/133
[ 0.591138] ata2.00: configured for UDMA/133
[ 0.591233] scsi 1:0:0:0: Direct-Access ATA SanDisk SDSSDHII 10RL PQ: 0 ANSI: 5
[ 0.591431] sd 1:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[ 0.591439] sd 1:0:0:0: [sda] Write Protect is off
[ 0.591441] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.591451] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.591464] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 0.591468] scsi 2:0:0:0: Direct-Access ATA SanDisk Ultra II 00RL PQ: 0 ANSI: 5
[ 0.591669] sd 2:0:0:0: [sdb] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[ 0.591676] sd 2:0:0:0: [sdb] Write Protect is off
[ 0.591678] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.591686] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.591698] sd 2:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
[ 0.593418] sdb: sdb1
[ 0.593449] sda: sda1
[ 0.593454] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 0.593488] sd 1:0:0:0: [sda] Attached SCSI disk
[ 0.594031] Freeing unused decrypted memory: 2028K
[ 0.594315] Freeing unused kernel image (initmem) memory: 3408K
[ 0.610246] Write protecting the kernel read-only data: 30720k
[ 0.610509] Freeing unused kernel image (rodata/data gap) memory: 1492K
[ 0.655103] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.655106] rodata_test: all tests were successful
[ 0.655107] x86/mm: Checking user space page tables
[ 0.693922] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.693924] Run /init as init process
[ 0.693925] with arguments:
[ 0.693926] /init
[ 0.693927] with environment:
[ 0.693927] HOME=/
[ 0.693928] TERM=linux
[ 0.693928] BOOT_IMAGE=/boot/vmlinuz-linux
[ 0.790886] nvidia: loading out-of-tree module taints kernel.
[ 0.790893] nvidia: module license 'NVIDIA' taints kernel.
[ 0.790893] Disabling lock debugging due to kernel taint
[ 0.790895] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 0.790896] nvidia: module license taints kernel.
[ 1.080362] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
[ 1.081254] nvidia 0000:01:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=none
[ 1.197829] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 545.29.06 Thu Nov 16 01:59:08 UTC 2023
[ 1.213235] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 545.29.06 Thu Nov 16 01:47:29 UTC 2023
[ 1.215529] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ 1.266892] tsc: Refined TSC clocksource calibration: 3999.996 MHz
[ 1.266897] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7350b459580, max_idle_ns: 881591204237 ns
[ 1.266933] clocksource: Switched to clocksource tsc
[ 1.331254] nvidia-uvm: Loaded the UVM driver, major device number 241.
[ 1.332780] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.157147] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 2.252179] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.252184] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.253241] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 2.253394] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.253397] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.253398] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 2.253448] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.07
[ 2.253451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.253452] usb usb1: Product: xHCI Host Controller
[ 2.253453] usb usb1: Manufacturer: Linux 6.7.6-arch1-1 xhci-hcd
[ 2.253455] usb usb1: SerialNumber: 0000:00:14.0
[ 2.253581] hub 1-0:1.0: USB hub found
[ 2.253597] hub 1-0:1.0: 14 ports detected
[ 2.257150] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.07
[ 2.257153] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.257155] usb usb2: Product: xHCI Host Controller
[ 2.257156] usb usb2: Manufacturer: Linux 6.7.6-arch1-1 xhci-hcd
[ 2.257158] usb usb2: SerialNumber: 0000:00:14.0
[ 2.257233] hub 2-0:1.0: USB hub found
[ 2.257243] hub 2-0:1.0: 6 ports detected
[ 2.261745] nvme nvme0: pci function 0000:02:00.0
[ 2.275092] nvme nvme0: 7/0/0 default/read/poll queues
[ 2.295053] nvme0n1: p1 p2
[ 2.315717] fbcon: Taking over console
[ 2.315790] Console: switching to colour frame buffer device 128x48
[ 2.375764] EXT4-fs (nvme0n1p2): mounted filesystem XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX r/w with ordered data mode. Quota mode: none.
[ 2.455415] systemd[1]: systemd 255.3-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
[ 2.455419] systemd[1]: Detected architecture x86-64.
[ 2.456769] systemd[1]: Hostname set to <Xenos>.
[ 2.513567] usb 1-5: new high-speed USB device number 2 using xhci_hcd
[ 2.654917] usb 1-5: New USB device found, idVendor=05e3, idProduct=0607, bcdDevice= 8.01
[ 2.654922] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.654923] usb 1-5: Product: USB2.0 Hub
[ 2.656013] hub 1-5:1.0: USB hub found
[ 2.656288] hub 1-5:1.0: 4 ports detected
[ 2.780247] usb 1-13: new full-speed USB device number 3 using xhci_hcd
[ 2.921587] usb 1-13: New USB device found, idVendor=1b1c, idProduct=0c04, bcdDevice= 2.00
[ 2.921602] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.921604] usb 1-13: Product: Integrated USB Bridge
[ 2.921605] usb 1-13: Manufacturer: Corsair Memory, Inc.
[ 2.966933] systemd[1]: bpf-lsm: LSM BPF program attached
[ 3.158073] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.187427] systemd[1]: Created slice Virtual Machine and Container Slice.
[ 3.187739] systemd[1]: Created slice Slice /system/dirmngr.
[ 3.187917] systemd[1]: Created slice Slice /system/getty.
[ 3.188094] systemd[1]: Created slice Slice /system/gpg-agent.
[ 3.188279] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 3.188459] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 3.188636] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 3.188817] systemd[1]: Created slice Slice /system/keyboxd.
[ 3.188994] systemd[1]: Created slice Slice /system/modprobe.
[ 3.189178] systemd[1]: Created slice Slice /system/systemd-fsck.
[ 3.189310] systemd[1]: Created slice User and Session Slice.
[ 3.189353] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.189383] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.189488] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.189502] systemd[1]: Expecting device /dev/disk/by-uuid/41A3-72CD...
[ 3.189506] systemd[1]: Expecting device /dev/disk/by-uuid/799f4cc2-5cdf-42d7-91dd-1bc216564d06...
[ 3.189513] systemd[1]: Reached target Local Encrypted Volumes.
[ 3.189520] systemd[1]: Reached target Login Prompts.
[ 3.189527] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 3.189536] systemd[1]: Reached target Remote File Systems.
[ 3.189542] systemd[1]: Reached target Slice Units.
[ 3.189552] systemd[1]: Reached target Swaps.
[ 3.189563] systemd[1]: Reached target Local Verity Protected Volumes.
[ 3.189610] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.189785] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.190526] systemd[1]: Listening on Process Core Dump Socket.
[ 3.190982] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.191062] systemd[1]: Listening on Journal Socket.
[ 3.191085] systemd[1]: TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.191167] systemd[1]: Listening on udev Control Socket.
[ 3.191227] systemd[1]: Listening on udev Kernel Socket.
[ 3.191904] systemd[1]: Mounting Huge Pages File System...
[ 3.192313] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.192732] systemd[1]: Mounting Kernel Debug File System...
[ 3.193135] systemd[1]: Mounting Kernel Trace File System...
[ 3.193854] systemd[1]: Mounting Temporary Directory /tmp...
[ 3.194571] systemd[1]: Starting Create List of Static Device Nodes...
[ 3.195181] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 3.196564] systemd[1]: Starting Load Kernel Module configfs...
[ 3.198139] systemd[1]: Starting Load Kernel Module dm_mod...
[ 3.198853] systemd[1]: Starting Load Kernel Module drm...
[ 3.199629] systemd[1]: Starting Load Kernel Module fuse...
[ 3.200226] usb 1-5.1: new low-speed USB device number 4 using xhci_hcd
[ 3.200409] systemd[1]: Starting Load Kernel Module loop...
[ 3.200479] systemd[1]: File System Check on Root Device was skipped because of an unmet condition check (ConditionPathIsReadWrite=!/).
[ 3.201951] systemd[1]: Starting Journal Service...
[ 3.203270] systemd[1]: Starting Load Kernel Modules...
[ 3.203291] systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.204079] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.204112] systemd[1]: TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 3.204645] systemd[1]: Starting Coldplug All udev Devices...
[ 3.205856] systemd[1]: Mounted Huge Pages File System.
[ 3.205968] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.206053] systemd[1]: Mounted Kernel Debug File System.
[ 3.206133] systemd[1]: Mounted Kernel Trace File System.
[ 3.206213] systemd[1]: Mounted Temporary Directory /tmp.
[ 3.209990] loop: module loaded
[ 3.216722] device-mapper: uevent: version 1.0.3
[ 3.216762] fuse: init (API version 7.39)
[ 3.216806] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[ 3.219529] systemd-journald[246]: Collecting audit messages is disabled.
[ 3.222105] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 3.222136] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.225622] i2c_dev: i2c /dev entries driver
[ 3.237042] systemd[1]: Finished Create List of Static Device Nodes.
[ 3.237448] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 3.247106] EXT4-fs (nvme0n1p2): re-mounted XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX r/w. Quota mode: none.
[ 3.251850] vboxdrv: Found 8 processor cores/threads
[ 3.273723] vboxdrv: TSC mode is Invariant, tentative frequency 3999995692 Hz
[ 3.273724] vboxdrv: Successfully loaded version 7.0.14 r161095 (interface 0x00330004)
[ 3.275928] VBoxNetAdp: Successfully started.
[ 3.277034] systemd[1]: Finished Load Kernel Module configfs.
[ 3.277503] systemd[1]: Started Journal Service.
[ 3.279238] VBoxNetFlt: Successfully started.
[ 3.284335] Guest personality initialized and is inactive
[ 3.284359] VMCI host device registered (name=vmci, major=10, minor=120)
[ 3.284361] Initialized host personality
[ 3.290163] /dev/vmmon[247]: Module vmmon: registered as misc device
[ 3.290165] /dev/vmmon[247]: Using tsc_khz as TSC frequency: 3999996
[ 3.290166] /dev/vmmon[247]: Module vmmon: initialized
[ 3.296094] usb 1-5.1: New USB device found, idVendor=046d, idProduct=c228, bcdDevice= 1.10
[ 3.296097] usb 1-5.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.296098] usb 1-5.1: Product: G19 Gaming Keyboard
[ 3.373584] usb 1-5.2: new high-speed USB device number 5 using xhci_hcd
[ 3.471614] usb 1-5.2: New USB device found, idVendor=046d, idProduct=c229, bcdDevice= 0.23
[ 3.471627] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.471628] usb 1-5.2: Product: G19 Gaming Keyboard
[ 3.471629] usb 1-5.2: Manufacturer: Logitech
[ 3.607809] systemd-journald[246]: Received client request to flush runtime journal.
[ 3.622446] systemd-journald[246]: /var/log/journal/d9793bd1469e467297d102a80200bbdf/system.journal: Journal file uses a different sequence number ID, rotating.
[ 3.622450] systemd-journald[246]: Rotating system journal.
[ 3.693568] usb 1-5.3: new full-speed USB device number 6 using xhci_hcd
[ 3.787281] usb 1-5.3: New USB device found, idVendor=06a3, idProduct=0ccc, bcdDevice= 1.30
[ 3.787285] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.787286] usb 1-5.3: Product: Cyborg R.A.T.3 Mouse
[ 3.787287] usb 1-5.3: Manufacturer: Saitek
[ 4.142874] usbcore: registered new interface driver usbhid
[ 4.142877] usbhid: USB HID core driver
[ 4.195090] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20230628/utaddress-204)
[ 4.195096] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 4.195099] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230628/utaddress-204)
[ 4.195102] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 4.195103] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20230628/utaddress-204)
[ 4.195108] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230628/utaddress-204)
[ 4.195112] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 4.195113] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20230628/utaddress-204)
[ 4.195117] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20230628/utaddress-204)
[ 4.195120] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[ 4.195122] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.195263] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.200663] pps_core: LinuxPPS API ver. 1 registered
[ 4.200666] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.201870] parport_pc 00:06: reported by Plug and Play ACPI
[ 4.202451] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 4.206061] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 4.206772] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 4.206790] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.208029] PTP clock support registered
[ 4.210030] i2c i2c-7: 4/4 memory slots populated (from DMI)
[ 4.210313] i2c i2c-7: Successfully instantiated SPD at 0x50
[ 4.210715] i2c i2c-7: Successfully instantiated SPD at 0x51
[ 4.210992] i2c i2c-7: Successfully instantiated SPD at 0x52
[ 4.211420] i2c i2c-7: Successfully instantiated SPD at 0x53
[ 4.230789] e1000e: Intel(R) PRO/1000 Network Driver
[ 4.230793] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.232153] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.267303] iTCO_vendor_support: vendor-support=0
[ 4.267411] hid-generic 0003:1B1C:0C04.0001: hiddev96,hidraw0: USB HID v1.11 Device [Corsair Memory, Inc. Integrated USB Bridge] on usb-0000:00:14.0-13/input0
[ 4.267439] at24 7-0050: supply vcc not found, using dummy regulator
[ 4.267537] input: G19 Gaming Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.0/0003:046D:C228.0002/input/input4
[ 4.267812] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 4.267814] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 4.267815] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 4.267815] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 4.267955] at24 7-0050: 256 byte spd EEPROM, read-only
[ 4.267976] at24 7-0051: supply vcc not found, using dummy regulator
[ 4.268479] at24 7-0051: 256 byte spd EEPROM, read-only
[ 4.268495] at24 7-0052: supply vcc not found, using dummy regulator
[ 4.268981] at24 7-0052: 256 byte spd EEPROM, read-only
[ 4.268997] at24 7-0053: supply vcc not found, using dummy regulator
[ 4.269489] at24 7-0053: 256 byte spd EEPROM, read-only
[ 4.272532] cryptd: max_cpu_qlen set to 1000
[ 4.277128] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 4.287548] AVX2 version of gcm_enc/dec engaged.
[ 4.287588] AES CTR mode by8 optimization enabled
[ 4.288573] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 4.288751] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 4.288799] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 4.288804] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 4.289618] ppdev: user-space parallel port driver
[ 4.306414] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 4.312408] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input5
[ 4.316030] snd_hda_codec_realtek hdaudioC0D2: ALC1150: SKU not ready 0x00000000
[ 4.316529] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 4.316532] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.316534] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.316536] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 4.316537] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x0
[ 4.316539] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 4.316540] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 4.316542] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 4.316543] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 4.321335] md0: detected capacity change from 0 to 3750240256
[ 4.322665] md0: p1
[ 4.323674] hid-generic 0003:046D:C228.0002: input,hidraw1: USB HID v1.10 Keyboard [G19 Gaming Keyboard] on usb-0000:00:14.0-5.1/input0
[ 4.323711] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 4.323751] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 4.323783] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 4.323827] input: G19 Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.1/0003:046D:C228.0003/input/input9
[ 4.329817] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.373776] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) fc:aa:14:90:ee:c9
[ 4.373779] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.373802] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 4.380368] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.380422] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.380423] hid-generic 0003:046D:C228.0003: input,hiddev97,hidraw2: USB HID v1.10 Device [G19 Gaming Keyboard] on usb-0000:00:14.0-5.1/input1
[ 4.380474] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.380526] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.380600] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.380619] input: Logitech G19 Gaming Keyboard Keypad as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.2/1-5.2:1.1/0003:046D:C229.0004/input/input19
[ 4.380651] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.386577] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 4.415207] intel_rapl_common: Found RAPL domain package
[ 4.415210] intel_rapl_common: Found RAPL domain core
[ 4.415211] intel_rapl_common: Found RAPL domain dram
[ 4.440423] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 4.440460] hid-generic 0003:046D:C229.0004: input,hiddev98,hidraw3: USB HID v1.11 Keypad [Logitech G19 Gaming Keyboard] on usb-0000:00:14.0-5.2/input1
[ 4.440600] input: Saitek Cyborg R.A.T.3 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3:1.0/0003:06A3:0CCC.0005/input/input21
[ 4.440690] hid-generic 0003:06A3:0CCC.0005: input,hidraw4: USB HID v1.11 Mouse [Saitek Cyborg R.A.T.3 Mouse] on usb-0000:00:14.0-5.3/input0
[ 4.450941] mousedev: PS/2 mouse device common for all mice
[ 4.581763] EXT4-fs (md0p1): mounted filesystem XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX r/w with ordered data mode. Quota mode: none.
[ 5.055990] it87: Found IT8620E chip at 0xa30, revision 4
[ 5.056015] it87: Beeping is supported
[ 5.455101] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 8.075802] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 8.275907] userif-3: sent link up event.
[ 9.280369] userif-3: sent link up event.
[ 11.182483] e1000e 0000:00:19.0 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 11.382574] userif-3: sent link up event.
[ 12.109503] systemd-journald[246]: /var/log/journal/d9793bd1469e467297d102a80200bbdf/user-1000.journal: Journal file uses a different sequence number ID, rotating.
[ 13.968541] userif-3: sent link up event.lsusb -v
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 [unknown]
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 6.07
iManufacturer 3 Linux 6.7.6-arch1-1 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0019
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 11
bDescriptorType 41
nNbrPorts 14
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0x00 0x00
PortPwrCtrlMask 0xff 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0503 highspeed power enable connect
Port 6: 0000.0100 power
Port 7: 0000.0100 power
Port 8: 0000.0100 power
Port 9: 0000.0100 power
Port 10: 0000.0100 power
Port 11: 0000.0100 power
Port 12: 0000.0100 power
Port 13: 0000.0103 power enable connect
Port 14: 0000.0100 power
Device Status: 0x0001
Self Powered
Bus 001 Device 002: ID 05e3:0607 Genesys Logic, Inc. Logitech G110 Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 [unknown]
bDeviceProtocol 2 TT per port
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0607 Logitech G110 Hub
bcdDevice 8.01
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0029
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 1 Single TT
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 2 TT per port
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e9
Per-port power switching
Per-port overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0303 lowspeed power enable connect
Port 2: 0000.0503 highspeed power enable connect
Port 3: 0000.0103 power enable connect
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0003
Self Powered
Remote Wakeup Enabled
Bus 001 Device 003: ID 1b1c:0c04 Corsair Link Cooling Node
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1b1c Corsair
idProduct 0x0c04 Link Cooling Node
bcdDevice 2.00
iManufacturer 1 Corsair Memory, Inc.
iProduct 2 Integrated USB Bridge
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0022
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 37
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Status: 0x0080
(Bus Powered)
Bus 001 Device 004: ID 046d:c228 Logitech, Inc. G19 Gaming Keyboard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc228 G19 Gaming Keyboard
bcdDevice 1.10
iManufacturer 0
iProduct 2 G19 Gaming Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x003b
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 64
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 24
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 81
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 24
Device Status: 0x0000
(Bus Powered)
Bus 001 Device 005: ID 046d:c229 Logitech, Inc. G19 Gaming Keyboard Macro Interface
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0xc229 G19 Gaming Keyboard Macro Interface
bcdDevice 0.23
iManufacturer 1 Logitech
iProduct 2 G19 Gaming Keyboard
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0039
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 Carson Jan 16 2009 11:15:45
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0
iInterface 5 G19 Gaming Keyboard (Display interface)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 7
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0
iInterface 6 G19 Gaming Keyboard (Macro interface)
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 33 US
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 97
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0007 1x 7 bytes
bInterval 7
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
Bus 001 Device 008: ID 06a3:0ccc Saitek PLC Cyborg R.A.T.3 Mouse
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 [unknown]
bDeviceSubClass 0 [unknown]
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x06a3 Saitek PLC
idProduct 0x0ccc Cyborg R.A.T.3 Mouse
bcdDevice 1.30
iManufacturer 1 Saitek
iProduct 2 Cyborg R.A.T.3 Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0022
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 33 US
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 69
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0 [unknown]
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 6.07
iManufacturer 3 Linux 6.7.6-arch1-1 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x001f
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 [unknown]
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x000f
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x02
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 512 micro seconds
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 50 * 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x00
Hub Port Status:
Port 1: 0000.02a0 5Gbps power Rx.Detect
Port 2: 0000.02a0 5Gbps power Rx.Detect
Port 3: 0000.02a0 5Gbps power Rx.Detect
Port 4: 0000.02a0 5Gbps power Rx.Detect
Port 5: 0000.02a0 5Gbps power Rx.Detect
Port 6: 0000.02a0 5Gbps power Rx.Detect
Device Status: 0x0001
Self PoweredMy laptop is a ThinkPad t440p (Intel GPU) also using Arch Linux (with vmware kernel module) with KDE on Wayland. It also auto-starts Nextcloud and syncthingtray, but not Steam (it's installed though).
Offline
#2 2024-03-09 00:31:15
- thrimbor
- Member
- Registered: 2024-02-26
- Posts: 6
Re: Mouse location issue and no clicking on KDE Wayland
A bit of time has passed now, and I have a few bits of info more.
* The Plasma 6 upgrade seemed to have fixed it on my first reboot, but it may have been a fluke since it happened again later
* Removing steam from autostart didn't change anything
* For the first time it happened today during gaming - I ran World of Warcraft, and suddenly couldn't use keyboard shortcuts or the Windows key, and the cursor didn't change when hovering over other windows, but everything still worked fine in WoW
* mouseover effects actually already start working as soon as I unplug the mouse, not when I plug it in again
This is a very weird issue, and I don't have a good idea how to track down the cause of this problem.
Offline
#3 2024-03-09 07:40:23
- kokoko3k
- Member
- Registered: 2008-11-14
- Posts: 2,401
Re: Mouse location issue and no clicking on KDE Wayland
I encountered a similar bug when using Xorg with compositor active and windows were offscreen, mouse pointer and mouse clicks were "offsetted".
Don't know if related tho, so take with a grain of salt:
https://bugs.kde.org/show_bug.cgi?id=482878
Are you under xorg? Does it change if you switch compositor off via ctrl alt f12?
Anything different if you switch to wayland?
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Offline
#4 2024-03-09 14:06:33
- thrimbor
- Member
- Registered: 2024-02-26
- Posts: 6
Re: Mouse location issue and no clicking on KDE Wayland
That doesn't look related to me - I'm on Wayland, not X11, and I don't have any offscreen windows.
I did some more experimenting though, and it appears that:
* It doesn't happen on KDE on X11, only on Wayland
* The mouse clicks don't appear to go to a different monitor, they just seem to disappear
* It only happens when I don't move the mouse on the login screen - I usually only type my password and hit enter
I have three identical monitors, and at first I thought that, because the monitor order appears different in sddm than in KDE, it might be an issue where the events somehow go to the wrong screen, but the location of the mouse pointer doesn't matter - simply jiggling the mouse a tiny bit seems to prevent the issue.
Not moving the mouse in sddm can't be the only cause though, that couldn't have caused it while I was running WoW.
I wish there was a way to somehow trace the input events' path through my system, but so far I haven't found a way to do that.
Offline
#5 2024-03-09 16:15:10
- seth
- Member
- Registered: 2012-09-03
- Posts: 52,238
Re: Mouse location issue and no clicking on KDE Wayland
OP sounds like xwayland issue, is only steam affected?
repo-steam or flatpak-steam?
@kokoko3k sure you're on X11? Plasma now defaults to wayland.
Offline
#6 2024-03-09 17:29:09
- kokoko3k
- Member
- Registered: 2008-11-14
- Posts: 2,401
Re: Mouse location issue and no clicking on KDE Wayland
Yes seth.
That particular bug has been just fixed in master for x11.
Help me to improve ssh-rdp !
Retroarch User? Try my koko-aio shader !
Offline
#7 2024-03-10 12:40:05
- thrimbor
- Member
- Registered: 2024-02-26
- Posts: 6
Re: Mouse location issue and no clicking on KDE Wayland
seth wrote:
OP sounds like xwayland issue, is only steam affected?
repo-steam or flatpak-steam?
No, the entire system is affected. Nothing that should react to the mouse hovering over it (X-button on notifications and windows, selecting text in konsole, window borders, launcher icons...) actually does, nothing is clickable, and not even pressing the Windows-button on my keyboard to bring up the launcher menu works. The entire desktop is unusable until I unplug my mouse, then stuff starts working (hover effects appear the second I pull the plug!) and I can plug my mouse back in again - sometimes only the X-buttons start working but the start menu and icons still don't, then I repeat it until everything works.
I initially suspected steam (from the repos) because having it automatically start it was one of the differences between my desktop PC and my notebook (everything works fine on the latter), but I checked and it doesn't make a difference.
My latest suspicion was that somehow sddm triggers this, and I tried having sddm itself run in Wayland mode, but that also didn't change anything.
Logging out and back in doesn't seem to re-trigger the issue, but rebooting does. It also once happened while I was playing World of Warcraft - everything worked fine in the game, nothing worked outside, no start menu, not even the cursor changing properly.
Offline
#8 2024-03-10 14:21:52
- seth
- Member
- Registered: 2012-09-03
- Posts: 52,238
Re: Mouse location issue and no clicking on KDE Wayland
It also once happened while I was playing World of Warcraft - everything worked fine in the game, nothing worked outside, no start menu, not even the cursor changing properly.
That just sounds as if the mouse was grabbed by the game.
* It only happens when I don't move the mouse on the login screen - I usually only type my password and hit enter
Is it a wireless mouse?
Do you have a wired one and can you replicate the issue w/ it?
Offline
#9 2024-03-10 16:45:22
- thrimbor
- Member
- Registered: 2024-02-26
- Posts: 6
Re: Mouse location issue and no clicking on KDE Wayland
seth wrote:
It also once happened while I was playing World of Warcraft - everything worked fine in the game, nothing worked outside, no start menu, not even the cursor changing properly.
That just sounds as if the mouse was grabbed by the game.
The game doesn't grab the mouse though. But even if it did, afaik that would not explain KDE's launcher not reacting to the Windows-key. I don't believe it's a separate issue from the one I'm having on login because the symptoms were identical.
seth wrote:
* It only happens when I don't move the mouse on the login screen - I usually only type my password and hit enter
Is it a wireless mouse?
Do you have a wired one and can you replicate the issue w/ it?
Nope. Like i described above, the issue happens with both mice (both wired), on multiple USB ports, with using the G19's USB hub and without. evtest shows the mouse events properly.
I'm almost certain I can exclude a hardware malfunction at this point.
Offline
#10 2024-04-29 11:07:32
- rahan56
- Member
- Registered: 2024-04-29
- Posts: 1
Re: Mouse location issue and no clicking on KDE Wayland
I think i have a similar issue (kde6/wayland).
Most of the time, on Intellij if i have more than one window open, one of them is not taking the mouse clicks.
The focus is on the window, but the clicks are taken by the other window on the background.
Not sure if this started with kde6 or with wayland switch.
Offline