You are not logged in.
It writes fine. When the writing process completes it opens the tray but it doesn't close it again for the verification process to take place. The program doesn't freeze. If I push the cancel button it responds fine. I closed the tray by the open/close button but the process didn't start. The system could read the disk without any problem. Have anyone else this problem?
k3b 1.0.4-1
Γίνε ρεαλιστής, μείνε ονειροπόλος ...
Offline
It happens to me too, after the burn is complete the tray is ejected, though for me k3b freezes. Inserting the disc again doesn't help, it stays frozen till I kill it. Using k3b 1.0.4-1 and Openbox so no complete KDE environment is installed, only whatever k3b depends on.
PC: Antec P182B | Asus P8Z77-V PRO | Intel i5 3570k | 16GB DDR3 | GeForce 450GTS | 4TB HDD | Pioneer BDR-207D | Asus Xonar DX | Altec Lansing CS21 | Eizo EV2736W-BK | Arch Linux x86_64
HTPC: Antec NSK2480 | ASUS M3A78-EM (AMD 780G) | AMD Athlon X3 425 | 8GB DDR2 | GeForce G210 | 2TB HDD | Arch Linux x86_64
Server: Raspberry Pi (model B) | 512MB RAM | 750GB HDD | Arch Linux ARM
Offline
I found a bug reference...
Γίνε ρεαλιστής, μείνε ονειροπόλος ...
Offline
So it seems to be an upstream bug, guess we have to wait for 1.0.5 then. Thanks for sharing the link.
PC: Antec P182B | Asus P8Z77-V PRO | Intel i5 3570k | 16GB DDR3 | GeForce 450GTS | 4TB HDD | Pioneer BDR-207D | Asus Xonar DX | Altec Lansing CS21 | Eizo EV2736W-BK | Arch Linux x86_64
HTPC: Antec NSK2480 | ASUS M3A78-EM (AMD 780G) | AMD Athlon X3 425 | 8GB DDR2 | GeForce G210 | 2TB HDD | Arch Linux x86_64
Server: Raspberry Pi (model B) | 512MB RAM | 750GB HDD | Arch Linux ARM
Offline
There is a patch... Maybe the maintainer could rebuild k3b including the patch.
http://bugs.kde.org/show_bug.cgi?id=151816
http://bugs.kde.org/attachment.cgi?id=22403&action=view
Last edited by firewalker (2007-12-28 12:23:44)
Γίνε ρεαλιστής, μείνε ονειροπόλος ...
Offline
Is this already on bugs.archlinux.org?
1000
Offline
Just thought that I'd share this: As there didn't seem to be any activity with Bug 151816 at the time, I fiddled around a little and found that verification will work here if k3b is set it to not eject the medium after the write process is complete (Settings -> Advanced, Miscellaneous, Do not eject medium after write process).
Offline
Just thought that I'd share this: As there didn't seem to be any activity with Bug 151816 at the time, I fiddled around a little and found that verification will work here if k3b is set it to not eject the medium after the write process is complete (Settings -> Advanced, Miscellaneous, Do not eject medium after write process).
Confirmed! It works for me too.
Γίνε ρεαλιστής, μείνε ονειροπόλος ...
Offline