You are not logged in.
Pages: 1
I installed the system (latest ISO release), and updated it with "# pacman -Syu" (kernel updated from 2.6.33 to 2.6.34) and rebooted.
Now, when the booting log is coming to udev, the monitor just is turning off, it doesn't receive any signal, the led is blinking.
I booted from the CD and blacklisted nouveau in rc.conf, then I could boot the system, here is the log file when it tried nouveau:
Jul 21 00:40:46 linux shutdown[18098]: shutting down for system reboot
Jul 21 00:40:46 linux init: Switching to runlevel: 6
Jul 21 00:42:19 linux kernel: Initializing cgroup subsys cpuset
Jul 21 00:42:19 linux kernel: Initializing cgroup subsys cpu
Jul 21 00:42:19 linux kernel: Linux version 2.6.34-ARCH (tobias@T-POWA-LX) (gcc version 4.5.0 20100610 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010
Jul 21 00:42:19 linux kernel: Command line: cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
Jul 21 00:42:19 linux kernel: BIOS-provided physical RAM map:
Jul 21 00:42:19 linux kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jul 21 00:42:19 linux kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Jul 21 00:42:19 linux kernel: BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jul 21 00:42:19 linux kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Jul 21 00:42:19 linux kernel: BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Jul 21 00:42:19 linux kernel: NX (Execute Disable) protection: active
Jul 21 00:42:19 linux kernel: DMI 2.4 present.
Jul 21 00:42:19 linux kernel: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Jul 21 00:42:19 linux kernel: No AGP bridge found
Jul 21 00:42:19 linux kernel: last_pfn = 0x130000 max_arch_pfn = 0x400000000
Jul 21 00:42:19 linux kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jul 21 00:42:19 linux kernel: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
Jul 21 00:42:19 linux kernel: Scanning 0 areas for low memory corruption
Jul 21 00:42:19 linux kernel: modified physical RAM map:
Jul 21 00:42:19 linux kernel: modified: 0000000000000000 - 0000000000010000 (reserved)
Jul 21 00:42:19 linux kernel: modified: 0000000000010000 - 000000000009fc00 (usable)
Jul 21 00:42:19 linux kernel: modified: 000000000009fc00 - 00000000000a0000 (reserved)
Jul 21 00:42:19 linux kernel: modified: 00000000000e4000 - 0000000000100000 (reserved)
Jul 21 00:42:19 linux kernel: modified: 0000000000100000 - 00000000cff80000 (usable)
Jul 21 00:42:19 linux kernel: modified: 00000000cff80000 - 00000000cff8e000 (ACPI data)
Jul 21 00:42:19 linux kernel: modified: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
Jul 21 00:42:19 linux kernel: modified: 00000000cffe0000 - 00000000d0000000 (reserved)
Jul 21 00:42:19 linux kernel: modified: 00000000fee00000 - 00000000fee01000 (reserved)
Jul 21 00:42:19 linux kernel: modified: 00000000fff00000 - 0000000100000000 (reserved)
Jul 21 00:42:19 linux kernel: modified: 0000000100000000 - 0000000130000000 (usable)
Jul 21 00:42:19 linux kernel: found SMP MP-table at [ffff8800000ff780] ff780
Jul 21 00:42:19 linux kernel: init_memory_mapping: 0000000000000000-00000000cff80000
Jul 21 00:42:19 linux kernel: init_memory_mapping: 0000000100000000-0000000130000000
Jul 21 00:42:19 linux kernel: RAMDISK: 37cb2000 - 37ff0000
Jul 21 00:42:19 linux kernel: ACPI: RSDP 00000000000fbcc0 00014 (v00 ACPIAM)
Jul 21 00:42:19 linux kernel: ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT 12000711 MSFT 00000097)
Jul 21 00:42:19 linux kernel: ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 12000711 MSFT 00000097)
Jul 21 00:42:19 linux kernel: ACPI: DSDT 00000000cff805c0 090B7 (v01 A0753 A0753001 00000001 INTL 20060113)
Jul 21 00:42:19 linux kernel: ACPI: FACS 00000000cff8e000 00040
Jul 21 00:42:19 linux kernel: ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 12000711 MSFT 00000097)
Jul 21 00:42:19 linux kernel: ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 12000711 MSFT 00000097)
Jul 21 00:42:19 linux kernel: ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 12000711 MSFT 00000097)
Jul 21 00:42:19 linux kernel: ACPI: HPET 00000000cff89680 00038 (v01 A_M_I_ OEMHPET 12000711 MSFT 00000097)
Jul 21 00:42:19 linux kernel: ACPI: OSFR 00000000cff896c0 000B0 (v01 A_M_I_ OEMOSFR 12000711 MSFT 00000097)
Jul 21 00:42:19 linux kernel: Zone PFN ranges:
Jul 21 00:42:19 linux kernel: DMA 0x00000010 -> 0x00001000
Jul 21 00:42:19 linux kernel: DMA32 0x00001000 -> 0x00100000
Jul 21 00:42:19 linux kernel: Normal 0x00100000 -> 0x00130000
Jul 21 00:42:19 linux kernel: Movable zone start PFN for each node
Jul 21 00:42:19 linux kernel: early_node_map[3] active PFN ranges
Jul 21 00:42:19 linux kernel: 0: 0x00000010 -> 0x0000009f
Jul 21 00:42:19 linux kernel: 0: 0x00000100 -> 0x000cff80
Jul 21 00:42:19 linux kernel: 0: 0x00100000 -> 0x00130000
Jul 21 00:42:19 linux kernel: ACPI: PM-Timer IO Port: 0x808
Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
Jul 21 00:42:19 linux kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Jul 21 00:42:19 linux kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jul 21 00:42:19 linux kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Jul 21 00:42:19 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 21 00:42:19 linux kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jul 21 00:42:19 linux kernel: Using ACPI (MADT) for SMP configuration information
Jul 21 00:42:19 linux kernel: ACPI: HPET id: 0xffffffff base: 0xfed00000
Jul 21 00:42:19 linux kernel: SMP: Allowing 4 CPUs, 2 hotplug CPUs
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
Jul 21 00:42:19 linux kernel: PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Jul 21 00:42:19 linux kernel: Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
Jul 21 00:42:19 linux kernel: Booting paravirtualized kernel on bare hardware
Jul 21 00:42:19 linux kernel: setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
Jul 21 00:42:19 linux kernel: PERCPU: Embedded 29 pages/cpu @ffff880001800000 s88232 r8192 d22360 u524288
Jul 21 00:42:19 linux kernel: pcpu-alloc: s88232 r8192 d22360 u524288 alloc=1*2097152
Jul 21 00:42:19 linux kernel: pcpu-alloc: [0] 0 1 2 3
Jul 21 00:42:19 linux kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1031311
Jul 21 00:42:19 linux kernel: Kernel command line: cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
Jul 21 00:42:19 linux kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Jul 21 00:42:19 linux kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jul 21 00:42:19 linux kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jul 21 00:42:19 linux kernel: Checking aperture...
Jul 21 00:42:19 linux kernel: No AGP bridge found
Jul 21 00:42:19 linux kernel: Subtract (57 early reservations)
Jul 21 00:42:19 linux kernel: #1 [0001000000 - 00016e1178] TEXT DATA BSS
Jul 21 00:42:19 linux kernel: #2 [0037cb2000 - 0037ff0000] RAMDISK
Jul 21 00:42:19 linux kernel: #3 [00016e2000 - 00016e2278] BRK
Jul 21 00:42:19 linux kernel: #4 [00000ff790 - 0000100000] BIOS reserved
Jul 21 00:42:19 linux kernel: #5 [00000ff780 - 00000ff790] MP-table mpf
Jul 21 00:42:19 linux kernel: #6 [000009fc00 - 00000f1530] BIOS reserved
Jul 21 00:42:19 linux kernel: #7 [00000f169c - 00000ff780] BIOS reserved
Jul 21 00:42:19 linux kernel: #8 [00000f1530 - 00000f169c] MP-table mpc
Jul 21 00:42:19 linux kernel: #9 [0000010000 - 0000012000] TRAMPOLINE
Jul 21 00:42:19 linux kernel: #10 [0000012000 - 0000016000] ACPI WAKEUP
Jul 21 00:42:19 linux kernel: #11 [0000016000 - 000001a000] PGTABLE
Jul 21 00:42:19 linux kernel: #12 [000001a000 - 000001b000] PGTABLE
Jul 21 00:42:19 linux kernel: #13 [00016e2280 - 00016e3280] BOOTMEM
Jul 21 00:42:19 linux kernel: #14 [000001b000 - 000001b200] BOOTMEM
Jul 21 00:42:19 linux kernel: #15 [0001ee4000 - 0001ee5000] BOOTMEM
Jul 21 00:42:19 linux kernel: #16 [0001ee5000 - 0001ee6000] BOOTMEM
Jul 21 00:42:19 linux kernel: #17 [0002000000 - 0005a00000] MEMMAP 0
Jul 21 00:42:19 linux kernel: #18 [00016e3280 - 00016fb280] BOOTMEM
Jul 21 00:42:19 linux kernel: #19 [00016fb280 - 0001713280] BOOTMEM
Jul 21 00:42:19 linux kernel: #20 [0001713280 - 000172b280] BOOTMEM
Jul 21 00:42:19 linux kernel: #21 [000172c000 - 000172d000] BOOTMEM
Jul 21 00:42:19 linux kernel: #22 [00016e1180 - 00016e11c1] BOOTMEM
Jul 21 00:42:19 linux kernel: #23 [00016e1200 - 00016e1243] BOOTMEM
Jul 21 00:42:19 linux kernel: #24 [00016e1280 - 00016e14e8] BOOTMEM
Jul 21 00:42:19 linux kernel: #25 [00016e1500 - 00016e1568] BOOTMEM
Jul 21 00:42:19 linux kernel: #26 [00016e1580 - 00016e15e8] BOOTMEM
Jul 21 00:42:19 linux kernel: #27 [00016e1600 - 00016e1668] BOOTMEM
Jul 21 00:42:19 linux kernel: #28 [00016e1680 - 00016e16e8] BOOTMEM
Jul 21 00:42:19 linux kernel: #29 [00016e1700 - 00016e1768] BOOTMEM
Jul 21 00:42:19 linux kernel: #30 [00016e1780 - 00016e17e8] BOOTMEM
Jul 21 00:42:19 linux kernel: #31 [00016e1800 - 00016e1868] BOOTMEM
Jul 21 00:42:19 linux kernel: #32 [00016e1880 - 00016e18e8] BOOTMEM
Jul 21 00:42:19 linux kernel: #33 [00016e1900 - 00016e1968] BOOTMEM
Jul 21 00:42:19 linux kernel: #34 [00016e1980 - 00016e19e8] BOOTMEM
Jul 21 00:42:19 linux kernel: #35 [00016e1a00 - 00016e1a20] BOOTMEM
Jul 21 00:42:19 linux kernel: #36 [00016e1a40 - 00016e1a60] BOOTMEM
Jul 21 00:42:19 linux kernel: #37 [00016e1a80 - 00016e1aba] BOOTMEM
Jul 21 00:42:19 linux kernel: #38 [00016e1ac0 - 00016e1afa] BOOTMEM
Jul 21 00:42:19 linux kernel: #39 [0001800000 - 000181d000] BOOTMEM
Jul 21 00:42:19 linux kernel: #40 [0001880000 - 000189d000] BOOTMEM
Jul 21 00:42:19 linux kernel: #41 [0001900000 - 000191d000] BOOTMEM
Jul 21 00:42:19 linux kernel: #42 [0001980000 - 000199d000] BOOTMEM
Jul 21 00:42:19 linux kernel: #43 [00016e1b00 - 00016e1b08] BOOTMEM
Jul 21 00:42:19 linux kernel: #44 [00016e1b40 - 00016e1b48] BOOTMEM
Jul 21 00:42:19 linux kernel: #45 [00016e1b80 - 00016e1b90] BOOTMEM
Jul 21 00:42:19 linux kernel: #46 [00016e1bc0 - 00016e1be0] BOOTMEM
Jul 21 00:42:19 linux kernel: #47 [00016e1c00 - 00016e1d30] BOOTMEM
Jul 21 00:42:19 linux kernel: #48 [00016e1d40 - 00016e1d90] BOOTMEM
Jul 21 00:42:19 linux kernel: #49 [00016e1dc0 - 00016e1e10] BOOTMEM
Jul 21 00:42:19 linux kernel: #50 [000172d000 - 0001735000] BOOTMEM
Jul 21 00:42:19 linux kernel: #51 [000199d000 - 0001d9d000] BOOTMEM
Jul 21 00:42:19 linux kernel: #52 [0005a00000 - 0005c00000] BOOTMEM
Jul 21 00:42:19 linux kernel: #53 [0005c00000 - 0009c00000] BOOTMEM
Jul 21 00:42:19 linux kernel: #54 [0001735000 - 0001755000] BOOTMEM
Jul 21 00:42:19 linux kernel: #55 [0001755000 - 0001795000] BOOTMEM
Jul 21 00:42:19 linux kernel: #56 [000001ba00 - 0000023a00] BOOTMEM
Jul 21 00:42:19 linux kernel: Memory: 4050632k/4980736k available (3484k kernel code, 787396k absent, 142708k reserved, 1796k data, 480k init)
Jul 21 00:42:19 linux kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jul 21 00:42:19 linux kernel: Hierarchical RCU implementation.
Jul 21 00:42:19 linux kernel: NR_IRQS:768
Jul 21 00:42:19 linux kernel: Console: colour VGA+ 80x25
Jul 21 00:42:19 linux kernel: console [tty0] enabled
Jul 21 00:42:19 linux kernel: allocated 41943040 bytes of page_cgroup
Jul 21 00:42:19 linux kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Jul 21 00:42:19 linux kernel: Fast TSC calibration using PIT
Jul 21 00:42:19 linux kernel: Detected 3005.707 MHz processor.
Jul 21 00:42:19 linux kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 6013.88 BogoMIPS (lpj=10019023)
Jul 21 00:42:19 linux kernel: Security Framework initialized
Jul 21 00:42:19 linux kernel: Mount-cache hash table entries: 256
Jul 21 00:42:19 linux kernel: Initializing cgroup subsys ns
Jul 21 00:42:19 linux kernel: Initializing cgroup subsys cpuacct
Jul 21 00:42:19 linux kernel: Initializing cgroup subsys memory
Jul 21 00:42:19 linux kernel: Initializing cgroup subsys devices
Jul 21 00:42:19 linux kernel: Initializing cgroup subsys freezer
Jul 21 00:42:19 linux kernel: Initializing cgroup subsys net_cls
Jul 21 00:42:19 linux kernel: CPU: Physical Processor ID: 0
Jul 21 00:42:19 linux kernel: CPU: Processor Core ID: 0
Jul 21 00:42:19 linux kernel: mce: CPU supports 6 MCE banks
Jul 21 00:42:19 linux kernel: CPU0: Thermal monitoring enabled (TM2)
Jul 21 00:42:19 linux kernel: using mwait in idle threads.
Jul 21 00:42:19 linux kernel: Performance Events: Core2 events, Intel PMU driver.
Jul 21 00:42:19 linux kernel: ... version: 2
Jul 21 00:42:19 linux kernel: ... bit width: 40
Jul 21 00:42:19 linux kernel: ... generic registers: 2
Jul 21 00:42:19 linux kernel: ... value mask: 000000ffffffffff
Jul 21 00:42:19 linux kernel: ... max period: 000000007fffffff
Jul 21 00:42:19 linux kernel: ... fixed-purpose events: 3
Jul 21 00:42:19 linux kernel: ... event mask: 0000000700000003
Jul 21 00:42:19 linux kernel: ACPI: Core revision 20100121
Jul 21 00:42:19 linux kernel: Setting APIC routing to flat
Jul 21 00:42:19 linux kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jul 21 00:42:19 linux kernel: CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
Jul 21 00:42:19 linux kernel: Booting Node 0, Processors #1
Jul 21 00:42:19 linux kernel: Brought up 2 CPUs
Jul 21 00:42:19 linux kernel: Total of 2 processors activated (12027.40 BogoMIPS).
Jul 21 00:42:19 linux kernel: devtmpfs: initialized
Jul 21 00:42:19 linux kernel: NET: Registered protocol family 16
Jul 21 00:42:19 linux kernel: ACPI: bus type pci registered
Jul 21 00:42:19 linux kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Jul 21 00:42:19 linux kernel: PCI: not using MMCONFIG
Jul 21 00:42:19 linux kernel: PCI: Using configuration type 1 for base access
Jul 21 00:42:19 linux kernel: bio: create slab <bio-0> at 0
Jul 21 00:42:19 linux kernel: ACPI: Executed 1 blocks of module-level executable AML code
Jul 21 00:42:19 linux kernel: ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
Jul 21 00:42:19 linux kernel: ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
Jul 21 00:42:19 linux kernel: ACPI: Interpreter enabled
Jul 21 00:42:19 linux kernel: ACPI: (supports S0 S1 S3 S4 S5)
Jul 21 00:42:19 linux kernel: ACPI: Using IOAPIC for interrupt routing
Jul 21 00:42:19 linux kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Jul 21 00:42:19 linux kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Jul 21 00:42:19 linux kernel: ACPI: No dock devices found.
Jul 21 00:42:19 linux kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
Jul 21 00:42:19 linux kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 21 00:42:19 linux kernel: pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
Jul 21 00:42:19 linux kernel: pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
Jul 21 00:42:19 linux kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: PCI bridge to [bus 04-04]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: PCI bridge to [bus 03-03]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: PCI bridge to [bus 02-02]
Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Jul 21 00:42:19 linux kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Jul 21 00:42:19 linux kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Jul 21 00:42:19 linux kernel: vgaarb: loaded
Jul 21 00:42:19 linux kernel: PCI: Using ACPI for IRQ routing
Jul 21 00:42:19 linux kernel: NetLabel: Initializing
Jul 21 00:42:19 linux kernel: NetLabel: domain hash size = 128
Jul 21 00:42:19 linux kernel: NetLabel: protocols = UNLABELED CIPSOv4
Jul 21 00:42:19 linux kernel: NetLabel: unlabeled traffic allowed by default
Jul 21 00:42:19 linux kernel: HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Jul 21 00:42:19 linux kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Jul 21 00:42:19 linux kernel: hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Jul 21 00:42:19 linux kernel: Switching to clocksource tsc
Jul 21 00:42:19 linux kernel: pnp: PnP ACPI init
Jul 21 00:42:19 linux kernel: ACPI: bus type pnp registered
Jul 21 00:42:19 linux kernel: pnp: PnP ACPI: found 14 devices
Jul 21 00:42:19 linux kernel: ACPI: ACPI bus type pnp unregistered
Jul 21 00:42:19 linux kernel: system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:06: [io 0x0290-0x0297] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [io 0x04d0-0x04d1] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [io 0x0800-0x087f] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [io 0x0480-0x04bf] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
Jul 21 00:42:19 linux kernel: system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
Jul 21 00:42:19 linux kernel: system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
Jul 21 00:42:19 linux kernel: system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: PCI bridge to [bus 01-01]
Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe9fffff]
Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: PCI bridge to [bus 04-04]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: PCI bridge to [bus 03-03]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: bridge window [mem 0xfeb00000-0xfebfffff]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: PCI bridge to [bus 02-02]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: bridge window [mem 0xf0600000-0xf07fffff 64bit pref]
Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: PCI bridge to [bus 05-05]
Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: bridge window [mem disabled]
Jul 21 00:42:19 linux kernel: pci 0000:00:1e.0: bridge window [mem pref disabled]
Jul 21 00:42:19 linux kernel: pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: enabling device (0106 -> 0107)
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: enabling device (0106 -> 0107)
Jul 21 00:42:19 linux kernel: pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Jul 21 00:42:19 linux kernel: NET: Registered protocol family 2
Jul 21 00:42:19 linux kernel: IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jul 21 00:42:19 linux kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Jul 21 00:42:19 linux kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jul 21 00:42:19 linux kernel: TCP: Hash tables configured (established 262144 bind 65536)
Jul 21 00:42:19 linux kernel: TCP reno registered
Jul 21 00:42:19 linux kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
Jul 21 00:42:19 linux kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Jul 21 00:42:19 linux kernel: NET: Registered protocol family 1
Jul 21 00:42:19 linux kernel: Unpacking initramfs...
Jul 21 00:42:19 linux kernel: Freeing initrd memory: 3320k freed
Jul 21 00:42:19 linux kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Jul 21 00:42:19 linux kernel: Placing 64MB software IO TLB between ffff880005c00000 - ffff880009c00000
Jul 21 00:42:19 linux kernel: software IO TLB at phys 0x5c00000 - 0x9c00000
Jul 21 00:42:19 linux kernel: Scanning for low memory corruption every 60 seconds
Jul 21 00:42:19 linux kernel: audit: initializing netlink socket (disabled)
Jul 21 00:42:19 linux kernel: type=2000 audit(1279654888.309:1): initialized
Jul 21 00:42:19 linux kernel: VFS: Disk quotas dquot_6.5.2
Jul 21 00:42:19 linux kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jul 21 00:42:19 linux kernel: msgmni has been set to 7917
Jul 21 00:42:19 linux kernel: alg: No test for stdrng (krng)
Jul 21 00:42:19 linux kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Jul 21 00:42:19 linux kernel: io scheduler noop registered
Jul 21 00:42:19 linux kernel: io scheduler deadline registered
Jul 21 00:42:19 linux kernel: io scheduler cfq registered (default)
Jul 21 00:42:19 linux kernel: pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS
Jul 21 00:42:19 linux kernel: pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: no _OSC support
Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13
Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS
Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: no _OSC support
Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13
Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.4: Requesting control of PCIe PME from ACPI BIOS
Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.4: Failed to receive control of PCIe PME service: no _OSC support
Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:1c.4:pcie01 failed with error -13
Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.5: Requesting control of PCIe PME from ACPI BIOS
Jul 21 00:42:19 linux kernel: pcieport 0000:00:1c.5: Failed to receive control of PCIe PME service: no _OSC support
Jul 21 00:42:19 linux kernel: pcie_pme: probe of 0000:00:1c.5:pcie01 failed with error -13
Jul 21 00:42:19 linux kernel: Linux agpgart interface v0.103
Jul 21 00:42:19 linux kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jul 21 00:42:19 linux kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 21 00:42:19 linux kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 21 00:42:19 linux kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jul 21 00:42:19 linux kernel: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jul 21 00:42:19 linux kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 21 00:42:19 linux kernel: mice: PS/2 mouse device common for all mice
Jul 21 00:42:19 linux kernel: cpuidle: using governor ladder
Jul 21 00:42:19 linux kernel: cpuidle: using governor menu
Jul 21 00:42:19 linux kernel: TCP cubic registered
Jul 21 00:42:19 linux kernel: NET: Registered protocol family 17
Jul 21 00:42:19 linux kernel: registered taskstats version 1
Jul 21 00:42:19 linux kernel: Initalizing network drop monitor service
Jul 21 00:42:19 linux kernel: Freeing unused kernel memory: 480k freed
Jul 21 00:42:19 linux kernel: udev: starting version 160
Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver usbfs
Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver hub
Jul 21 00:42:19 linux kernel: usbcore: registered new device driver usb
Jul 21 00:42:19 linux kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: debug port 1
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
Jul 21 00:42:19 linux kernel: SCSI subsystem initialized
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Jul 21 00:42:19 linux kernel: hub 1-0:1.0: USB hub found
Jul 21 00:42:19 linux kernel: hub 1-0:1.0: 6 ports detected
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: debug port 1
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
Jul 21 00:42:19 linux kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jul 21 00:42:19 linux kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Jul 21 00:42:19 linux kernel: hub 2-0:1.0: USB hub found
Jul 21 00:42:19 linux kernel: hub 2-0:1.0: 6 ports detected
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
Jul 21 00:42:19 linux kernel: hub 3-0:1.0: USB hub found
Jul 21 00:42:19 linux kernel: hub 3-0:1.0: 2 ports detected
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
Jul 21 00:42:19 linux kernel: hub 4-0:1.0: USB hub found
Jul 21 00:42:19 linux kernel: hub 4-0:1.0: 2 ports detected
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
Jul 21 00:42:19 linux kernel: hub 5-0:1.0: USB hub found
Jul 21 00:42:19 linux kernel: hub 5-0:1.0: 2 ports detected
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
Jul 21 00:42:19 linux kernel: hub 6-0:1.0: USB hub found
Jul 21 00:42:19 linux kernel: hub 6-0:1.0: 2 ports detected
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
Jul 21 00:42:19 linux kernel: hub 7-0:1.0: USB hub found
Jul 21 00:42:19 linux kernel: hub 7-0:1.0: 2 ports detected
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Jul 21 00:42:19 linux kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
Jul 21 00:42:19 linux kernel: hub 8-0:1.0: USB hub found
Jul 21 00:42:19 linux kernel: hub 8-0:1.0: 2 ports detected
Jul 21 00:42:19 linux kernel: pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
Jul 21 00:42:19 linux kernel: pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jul 21 00:42:19 linux kernel: scsi0 : pata_jmicron
Jul 21 00:42:19 linux kernel: scsi1 : pata_jmicron
Jul 21 00:42:19 linux kernel: ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
Jul 21 00:42:19 linux kernel: ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
Jul 21 00:42:19 linux kernel: scsi2 : ata_piix
Jul 21 00:42:19 linux kernel: scsi3 : ata_piix
Jul 21 00:42:19 linux kernel: ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
Jul 21 00:42:19 linux kernel: ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
Jul 21 00:42:19 linux kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Jul 21 00:42:19 linux kernel: scsi4 : ata_piix
Jul 21 00:42:19 linux kernel: scsi5 : ata_piix
Jul 21 00:42:19 linux kernel: ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
Jul 21 00:42:19 linux kernel: ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
Jul 21 00:42:19 linux kernel: ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jul 21 00:42:19 linux kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Jul 21 00:42:19 linux kernel: ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Jul 21 00:42:19 linux kernel: scsi6 : ahci
Jul 21 00:42:19 linux kernel: scsi7 : ahci
Jul 21 00:42:19 linux kernel: ata7: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 16
Jul 21 00:42:19 linux kernel: ata8: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 16
Jul 21 00:42:19 linux kernel: ata4: SATA link down (SStatus 0 SControl 300)
Jul 21 00:42:19 linux kernel: ata7: SATA link down (SStatus 0 SControl 300)
Jul 21 00:42:19 linux kernel: ata8: SATA link down (SStatus 0 SControl 300)
Jul 21 00:42:19 linux kernel: usb 4-1: new low speed USB device using uhci_hcd and address 2
Jul 21 00:42:19 linux kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jul 21 00:42:19 linux kernel: ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 00:42:19 linux kernel: ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 21 00:42:19 linux kernel: ata5.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100
Jul 21 00:42:19 linux kernel: ata5.00: configured for UDMA/100
Jul 21 00:42:19 linux kernel: ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133
Jul 21 00:42:19 linux kernel: ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jul 21 00:42:19 linux kernel: ata3.00: configured for UDMA/133
Jul 21 00:42:19 linux kernel: scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5
Jul 21 00:42:19 linux kernel: scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5
Jul 21 00:42:19 linux kernel: ata6.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
Jul 21 00:42:19 linux kernel: ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jul 21 00:42:19 linux kernel: ata6.00: configured for UDMA/133
Jul 21 00:42:19 linux kernel: scsi 5:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] Write Protect is off
Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 21 00:42:19 linux kernel: sda:
Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] Write Protect is off
Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 21 00:42:19 linux kernel: sdb:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Jul 21 00:42:19 linux kernel: Uniform CD-ROM driver Revision: 3.20
Jul 21 00:42:19 linux kernel: sda1 sda2 < sdb1 sdb2 sdb3 sdb4 < sda5 sdb5 sdb6 sda6 >
Jul 21 00:42:19 linux kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Jul 21 00:42:19 linux kernel: sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 >
Jul 21 00:42:19 linux kernel: sd 5:0:0:0: [sdb] Attached SCSI disk
Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver hiddev
Jul 21 00:42:19 linux kernel: input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input0
Jul 21 00:42:19 linux kernel: generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:1a.1-1/input0
Jul 21 00:42:19 linux kernel: usbcore: registered new interface driver usbhid
Jul 21 00:42:19 linux kernel: usbhid: USB HID core driver
Jul 21 00:42:19 linux kernel: usb 8-1: new low speed USB device using uhci_hcd and address 2
Jul 21 00:42:19 linux kernel: input: KYE 4D device Ergomedia as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
Jul 21 00:42:19 linux kernel: generic-usb 0003:05D5:8001.0002: input,hidraw1: USB HID v1.10 Keyboard [KYE 4D device Ergomedia] on usb-0000:00:1d.2-1/input0
Jul 21 00:42:19 linux kernel: input: KYE 4D device Ergomedia as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
Jul 21 00:42:19 linux kernel: generic-usb 0003:05D5:8001.0003: input,hidraw2: USB HID v1.10 Device [KYE 4D device Ergomedia] on usb-0000:00:1d.2-1/input1
Jul 21 00:42:19 linux kernel: device-mapper: uevent: version 1.0.3
Jul 21 00:42:19 linux kernel: device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
Jul 21 00:42:19 linux kernel: Intel AES-NI instructions are not detected.
Jul 21 00:42:19 linux kernel: padlock: VIA PadLock not detected.
Jul 21 00:42:19 linux kernel: SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Jul 21 00:42:19 linux kernel: SGI XFS Quota Management subsystem
Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-0
Jul 21 00:42:19 linux kernel: rtc_cmos 00:03: RTC can wake from S4
Jul 21 00:42:19 linux kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Jul 21 00:42:19 linux kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Jul 21 00:42:19 linux kernel: udev: starting version 160
Jul 21 00:42:19 linux kernel: input: PC Speaker as /devices/platform/pcspkr/input/input3
Jul 21 00:42:19 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
Jul 21 00:42:19 linux kernel: ACPI: Power Button [PWRB]
Jul 21 00:42:19 linux kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Jul 21 00:42:19 linux kernel: ACPI: Power Button [PWRF]
Jul 21 00:42:19 linux kernel: iTCO_vendor_support: vendor-support=0
Jul 21 00:42:19 linux kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
Jul 21 00:42:19 linux kernel: iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
Jul 21 00:42:19 linux kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Jul 21 00:42:19 linux kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jul 21 00:42:19 linux kernel: ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f 64bit pref]
Jul 21 00:42:19 linux kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jul 21 00:42:19 linux kernel: sd 2:0:0:0: Attached scsi generic sg0 type 0
Jul 21 00:42:19 linux kernel: sr 4:0:0:0: Attached scsi generic sg1 type 5
Jul 21 00:42:19 linux kernel: sd 5:0:0:0: Attached scsi generic sg2 type 0
Jul 21 00:42:19 linux kernel: ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
Jul 21 00:42:19 linux kernel: ne2k-pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Jul 21 00:42:19 linux kernel: eth0: [removed]
Jul 21 00:42:19 linux kernel: atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Jul 21 00:42:19 linux kernel: atl1 0000:02:00.0: version 2.1.3
Jul 21 00:42:19 linux kernel: [drm] Initialized drm 1.1.0 20060810
Jul 21 00:42:19 linux kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094100a1)
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Jul 21 00:42:19 linux kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Bios version 62.94.11.00
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE32
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD21B
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE176
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE2A5
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE4B5
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE51A
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xE51A: Condition still not met after 20ms, skipping following opcodes
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xA862: parsing output script 0
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
Jul 21 00:42:19 linux kernel: hda_codec: ALC883: BIOS auto-probing.
Jul 21 00:42:19 linux kernel: input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
Jul 21 00:42:19 linux kernel: [TTM] Zone kernel: Available graphics memory: 2027216 kiB.
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Jul 21 00:42:19 linux kernel: mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TV connector
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: no encoders, ignoring
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo ffff88012beb8000
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2A: parsing output script 1
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2B: parsing output script 2
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xBCF0: parsing clock script 0
Jul 21 00:42:19 linux kernel: [drm] nouveau 0000:01:00.0: 0xB3E9: parsing clock script 1
Jul 21 00:42:19 linux kernel: Console: switching to colour frame buffer device 180x56
Jul 21 00:42:19 linux kernel: fb0: nouveaufb frame buffer device
Jul 21 00:42:19 linux kernel: registered panic notifier
Jul 21 00:42:19 linux kernel: [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
Jul 21 00:42:19 linux kernel: XFS mounting filesystem sdb1
Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-1
Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-3
Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-4
Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-2
Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-5
Jul 21 00:42:19 linux kernel: XFS mounting filesystem dm-6
Jul 21 00:42:19 linux kernel: Adding 979928k swap on /dev/mapper/dm_swap. Priority:-1 extents:1 across:979928k
Jul 21 00:42:19 linux kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jul 21 00:42:19 linux kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jul 21 00:42:19 linux kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
Jul 21 00:42:19 linux kernel: nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
Jul 21 00:42:19 linux kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jul 21 00:42:19 linux init: Entering runlevel: 3
Jul 21 00:43:17 linux shutdown[3617]: shutting down for system reboot
Jul 21 00:43:18 linux init: Switching to runlevel: 6It was very strange for me, because I had no idea about the KMS thing...
I thought it must be because I haven't installed x86-video-nouveau, so I installed xorg and x86-video-nouveau, un-blacklisted the nouveau module, but the same error happened. I blacklisted it again, booted. Now when trying "modprobe nouveau" in the fully booted system the monitor still goes the same bad way, reboot, here is the log of that try:
Jul 21 02:19:36 linux kernel: [drm] Initialized drm 1.1.0 20060810
Jul 21 02:19:36 linux kernel: nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094100a1)
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: ... appears to be valid
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: BIT BIOS found
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Bios version 62.94.11.00
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE32
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD21B
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE176
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE2A5
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE4B5
Jul 21 02:19:36 linux kernel: [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE51A
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xE51A: Condition still not met after 20ms, skipping following opcodes
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xA862: parsing output script 0
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
Jul 21 02:19:37 linux kernel: [TTM] Zone kernel: Available graphics memory: 2027216 kiB.
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
Jul 21 02:19:37 linux kernel: mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DAC output
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TMDS output
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: Detected a TV connector
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: no encoders, ignoring
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40250000, bo ffff88012adae000
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2A: parsing output script 1
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBE2B: parsing output script 2
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xBCF0: parsing clock script 0
Jul 21 02:19:37 linux kernel: [drm] nouveau 0000:01:00.0: 0xB3E9: parsing clock script 1
Jul 21 02:19:37 linux kernel: Console: switching to colour frame buffer device 180x56
Jul 21 02:19:37 linux kernel: fb0: nouveaufb frame buffer device
Jul 21 02:19:37 linux kernel: registered panic notifier
Jul 21 02:19:37 linux kernel: [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0I can start xorg with vesa driver now, but would be nice to have nouveau working, here are some config files and other information:
# cat /boot/grub/menu.lst
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
#
# Linux Grub
# -------------------------
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
#
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz26 cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
initrd /kernel26.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz26 cryptdevice=/dev/sdb2:dm_root root=/dev/mapper/dm_root ro
initrd /kernel26-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd1,0)
#makeactive
#chainloader +1# cat /etc/rc.conf
#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/Paris"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!nouveau)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="arch-linux"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#
#Static IP example
eth0="eth0 192.168.0.1 netmask 255.255.255.252 broadcast 192.168.0.3"
eth1="eth1 10.0.1.7 netmask 255.255.255.0 broadcast 10.0.1.255"
INTERFACES=(!eth0 eth1)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 10.0.1.1"
ROUTES=(gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng dbus iptables network netfs crond alsa)# pacman -Qs video
local/libxv 1.0.5-1
X11 Video extension library
local/libxxf86vm 1.1.0-1
X11 XFree86 video mode extension library
local/videoproto 2.3.0-1
X11 Video extension wire protocol
local/xf86-video-nouveau 0.0.16_git20100517-1
Open Source 3D acceleration driver for nVidia cards (experimental)
local/xf86-video-vesa 2.3.0-2 (xorg xorg-video-drivers)
X.org vesa video driver
local/xf86vidmodeproto 2.3-1
X11 Video Mode extension wire protocolI think the problem is in "TMDS table revision 2.0 not currently supported", I just found that issue in http://nouveau.freedesktop.org/wiki/TroubleShooting.
As I can understand, there is no more nouveau-drm (I could find one only for LTS kernel) package (to try to update from AUR) and it is injected in the mainline kernel? What can I do now?
Thank you.
Last edited by arch_archer (2010-07-21 17:37:38)
Offline
MODULES=(!nouveau)
Offline
MODULES=(!nouveau)
Yes, I blacklisted it, because another way the system boots but I get no signal to my monitor.
Offline
Ooops, I must have accidentally clicked 'Submit' - I didn't mean to post it.
Try using some more nouveau goodness. I have no idea why nouveau-drm is unavailable atm - it was here yesterday ...
http://arm.kh.nu/search/index.php?a=32& … ommunity=1 <- this is for 32-bit
Last edited by karol (2010-07-21 00:01:30)
Offline
Thank you, I downloaded the latest archive for x86_64 (http://arm.konnichi.com/extra/os/x86_64 … pkg.tar.xz) but it is for 2.6.33 and its nouveau.ko is older than my version.
Offline
I've checked my other box - I have the -lts version and it runs fine.
Funny I didn't notice it.
Last edited by karol (2010-07-21 00:16:47)
Offline
Pages: 1