You are not logged in.

#1 2010-07-21 17:46:36

toad
Member
From: if only I knew
Registered: 2008-12-22
Posts: 1,775
Website

neither firewire nor usb recognised - not Arch specific

Flabbergasted... I was going to print something today (about two weeks after moving, first time) and noticed that my usb printer is not recognised. I then tried a number of different usb devices and none of them were recognised !???!

Here an excerpt from dmesg:

toad@deskarch 945\14 ~ > dmesg|grep error
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device not accepting address 4, error -71
usb 10-2: device not accepting address 5, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device not accepting address 8, error -71
usb 10-2: device not accepting address 9, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device not accepting address 12, error -71
usb 10-2: device not accepting address 13, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device descriptor read/64, error -71
usb 10-2: device not accepting address 16, error -71
usb 10-2: device not accepting address 17, error -71

I googled the error message and found threads dating back to 2005 but nothing recent. I remember having an EHCI problem years ago while still on Etch but other than that I don't know where to start...

Any pointers much appreciated.

Last edited by toad (2010-07-22 10:45:06)


never trust a toad...
::Grateful ArchDonor::
::Grateful Wikipedia Donor::

Offline

#2 2010-07-22 10:44:46

toad
Member
From: if only I knew
Registered: 2008-12-22
Posts: 1,775
Website

Re: neither firewire nor usb recognised - not Arch specific

After my initial panic here an update:

This is not Arch specific as I had the same experience with a live CD. Have since managed to get a few devices recognised, but the printer nor the firewire connection work as yet. And I still get this stuff on dmesg:

usb 7-1: new full speed USB device using uhci_hcd and address 6
usb 7-1: device descriptor read/64, error -71
usb 7-1: device descriptor read/64, error -71
usb 7-1: new full speed USB device using uhci_hcd and address 7
usb 7-1: device descriptor read/64, error -71
usb 7-1: device descriptor read/64, error -71
usb 7-1: new full speed USB device using uhci_hcd and address 8
usb 7-1: device not accepting address 8, error -71
usb 7-1: new full speed USB device using uhci_hcd and address 9
usb 7-1: device not accepting address 9, error -71
hub 7-0:1.0: unable to enumerate USB device on port 1

never trust a toad...
::Grateful ArchDonor::
::Grateful Wikipedia Donor::

Offline

Board footer

Powered by FluxBB