Arch Linux

parachuter

Member

Registered: 2010-06-21

Posts: 5

Not able to resume from suspend/hibernate

Hey guys,
I've had this problem since the moment I installed Arch (according to the pacman logs 17th March), but I was hoping until now for it to get resolved after some update.
The problem is, I'm not able to resume after a suspend or hibernate. It's really strange, suspending is always successful, according to the last line in /var/log/pm-suspend.log, but after I try to resume I get a blank screen and the system goes into a loop of turning on/off the hardware in intervals of around 10 seconds, and it never stops actually. pm-utils is configured according to the wiki, and the swap partition is big enough to hold all the session data.
Things I've tried so far:

• disabled KMS, added vga=0 to the kernel parameters

• tried vesa (so it's obviously not related to the video drivers)

• switched DEs (GNOME->KDE->currently XFCE)

• running pm-suspend from terminal

• added resume hook to /etc/mkinitcpio.conf

If you need more info please let me know,
Cheers

qchapter

Member

Registered: 2009-06-17

Posts: 43

Re: Not able to resume from suspend/hibernate

Hardware info would be helpful

parachuter

Member

Registered: 2010-06-21

Posts: 5

Re: Not able to resume from suspend/hibernate

H/W path       Device  Class       Description
==============================================
                       system      Computer
/0                     bus         Motherboard
/0/0                   memory      1015MiB System memory
/0/1                   processor   Genuine Intel(R) CPU           T2080  @ 1.73G
/0/1/1.1               processor   Logical CPU
/0/1/1.2               processor   Logical CPU
/0/100                 bridge      ATI Technologies Inc
/0/100/1               bridge      RS480 PCI Bridge
/0/100/1/5             display     RC410 [Radeon Xpress 200M]
/0/100/12              storage     IXP SB400 Serial ATA Controller
/0/100/13              bus         IXP SB400 USB Host Controller
/0/100/13.1            bus         IXP SB400 USB Host Controller
/0/100/13.2            bus         IXP SB400 USB2 Host Controller
/0/100/14              bus         IXP SB400 SMBus Controller
/0/100/14.1            storage     IXP SB400 IDE Controller
/0/100/14.2            multimedia  IXP SB4x0 High Definition Audio Controller
/0/100/14.3            bridge      IXP SB400 PCI-ISA Bridge
/0/100/14.4            bridge      IXP SB400 PCI-PCI Bridge
/0/100/14.4/1          bridge      CB1410 Cardbus Controller
/0/100/14.4/2  eth0    network     RTL-8139/8139C/8139C+
/0/100/14.4/4  wlan0   network     AR2413 802.11bg NIC

parachuter

Member

Registered: 2010-06-21

Posts: 5

Re: Not able to resume from suspend/hibernate

Bump.