You are not logged in.

#1 2010-08-16 16:31:38

WeeMan
Member
Registered: 2010-08-16
Posts: 16

zen-kernel: no init found

Hello together,
to speed up my old notebook I compiled a zen kernel (using PKGBUILD), but when I try to boot it, the following failure appears:

    "Kernel panic - not syncing: No init found. Try passing init=option to kernel [..]"

When passing init=/sbin/init:

    "Failed to execute /sbin/init"

I really hope somebody is able to help me, google wasn't. Thanks!

Offline

#2 2010-08-16 16:52:54

lucke
Member
From: Poland
Registered: 2004-11-30
Posts: 4,018

Re: zen-kernel: no init found

For some reason PKGBUILDs of the zen kernels use their own mkinitcpio config files - might be your problem.

Offline

#3 2010-08-16 18:05:01

WeeMan
Member
Registered: 2010-08-16
Posts: 16

Re: zen-kernel: no init found

Thank you for the fast answer.
If that's the problem, what should I do to fix this?

Offline

#4 2010-08-16 18:30:22

lucke
Member
From: Poland
Registered: 2004-11-30
Posts: 4,018

Re: zen-kernel: no init found

Compare /etc/mkinitcpio.conf and /etc/mkinitcpio-zen.conf. You can run "mkinitcpio -k 2.6.34-ZEN  -c /etc/mkinitcpio.conf -g /boot/kernel26-zen.img" to build a mkinitcpio image for the zen kernel using mkinitcpio.conf.

Did you change the config file from AUR in any way? If it's not mkinitcpio's fault, then maybe you removed too much from the config.

Offline

#5 2010-08-16 18:44:10

WeeMan
Member
Registered: 2010-08-16
Posts: 16

Re: zen-kernel: no init found

Thanks a lot. Output:

niklas@nikis-laptop ~ % sudo mkinitcpio -k 2.6.34-ZEN -c /etc/mkinitcpio.conf -g /boot/kernel26-zen.img
Passwort:
:: Begin build
:: Parsing hook [base]
:: Parsing hook [udev]
:: Parsing hook [autodetect]
FATAL: Could not load /lib/modules/2.6.34-ZEN/modules.dep: No such file or directory
find: "/lib/modules/2.6.34-ZEN": No such file or directory
FATAL: Could not load /lib/modules/2.6.34-ZEN/modules.dep: No such file or directory
find: "/lib/modules/2.6.34-ZEN": No such file or directory
:: Parsing hook [pata]
:: Parsing hook [scsi]
:: Parsing hook [sata]
:: Parsing hook [filesystems]
:: Generating image '/boot/kernel26-zen.img'...SUCCESS

Content of /lib/modules:
2.6.34
2.6.34-ARCH

I used the zen-kernel-seed and modified it to work with my system. Maybe I didn't include all necessary drivers, I'll check that.

Offline

#6 2010-08-16 19:07:18

lucke
Member
From: Poland
Registered: 2004-11-30
Posts: 4,018

Re: zen-kernel: no init found

Apparently, your zen kernel is called 2.6.34, not 2.6.34-ZEN. You can pacman -Ql package_name_of_the_zen_kernel to see its files.

What AUR or ABS "package" did you use to build your kernel?

Offline

#7 2010-08-16 19:29:32

WeeMan
Member
Registered: 2010-08-16
Posts: 16

Re: zen-kernel: no init found

mkinitcpio worked, but I still can't boot correctly (same failure).
I used http://aur.archlinux.org/packages.php?ID=30330 + the BFQ patches like described in the comments.

When I missed some drivers, can you give me a hint where I've got to look for? I used the zen-seed & lspci -n & http://kmuto.jp/debian/hcl/ when I was building the config. Once again, thank you for the help.

Offline

#8 2010-08-16 19:36:59

lucke
Member
From: Poland
Registered: 2004-11-30
Posts: 4,018

Re: zen-kernel: no init found

You're probably missing something which has to do with the disk/disk controller. You can use "localmodconfig" instead of "menuconfig" or similar to get a config crafted for your computer.

Offline

#9 2010-08-17 12:21:12

WeeMan
Member
Registered: 2010-08-16
Posts: 16

Re: zen-kernel: no init found

Ok, I changed menuconfig to localmodconfig, compiled, and it's the same as before. "Kernel Panic [..]".
My PKGBUILD:

# Contributor: Lex Rivera aka x-demon <aur@x-demon.org>
# Maintainer: Lex Rivera aka x-demon <aur@x-demon.org>

pkgname=kernel26-zen
pkgver=2.6.34
_basever=2.6.34
_zenver=1
_archver=1
pkgrel=1
pkgdesc="The Linux Kernel and modules with stable ZEN patch (non-git)"
arch=('i686' 'x86_64')
license=('GPL2')
url="http://zen-kernel.org"
provides=(kernel26=${pkgver})
backup=('etc/mkinitcpio.d/${pkgname}.preset' 'etc/mkinitcpio.d/${pkgname}-fallback.conf' 'etc/mkinitcpio-zen.conf')
depends=('coreutils' 'linux-firmware' 'module-init-tools' 'mkinitcpio')
makedepends=('xz-utils')
optdepends=('crda: to set the correct wireless channels of your country')
replaces=('kernel24' 'kernel24-scsi' 'kernel26-scsi'
          'alsa-driver' 'ieee80211' 'hostap-driver26'
          'pwc' 'nforce' 'squashfs' 'unionfs' 'ivtv'
          'zd1211' 'kvm-modules' 'iwlwifi' 'rt2x00-cvs'
          'gspcav1' 'atl2' 'wlan-ng26' 'rt2500')
install=kernel26-zen.install

### User defined variables ####
_menuconfig="1"                  #
_keep_source_code="0"          #
_zen_patch="1"                  #
_arch_patch="0"               #
###############################

source=(http://www.kernel.org/pub/linux/kernel/v2.6/linux-${_basever}.tar.bz2
        # ZEN patches
        [url]http://downloads.zen-kernel.org/${_basever}/${_basever}-zen${_zenver}.patch.lzma[/url]
    [url]http://algo.ing.unimo.it/people/paolo/disk_sched/patches/2.6.34-zen1/0001-block-prepare-I-O-context-code-for-BFQ.patch[/url]
    [url]http://algo.ing.unimo.it/people/paolo/disk_sched/patches/2.6.34-zen1/0002-block-add-cgroups-kconfig-and-build-bits-for-BFQ.patch[/url]
    [url]http://algo.ing.unimo.it/people/paolo/disk_sched/patches/2.6.34-zen1/0003-block-introduce-the-BFQ-I-O-scheduler.patch[/url]
        # configurations
        config
        config.x86_64
        ${pkgname}.preset
        mkinitcpio-${pkgname}.conf)

md5sums=('10eebcb0178fb4540e2165bfd7efc7ad'
         '91f1bd0cbff61ebbc379e76667cc0070'
     'f675ee850b0aab8c6c1f334604a60b87'                # BFQ1
     'cbe4ca99568682bb120a3c1c0638858a'           # BFQ2
     '341209b854e5ef4fcd515b44efa0d66c'                # BFQ3
         '36137735314f869aae68d0ce0955c019'           # config
         '4a496d5ee8025f123a4be6d3184cf2b9'
         '0ab28c6ef83545539d7282fd1e249d00'
         'deeade3bcf70f4a13beeca6c3287c7ca')

build() {
  KARCH=x86

  cd ${srcdir}/linux-${_basever} || return 1

  # Applying ZEN patch
  if [ "$_zen_patch" == "1" ]; then
        echo "Applying ${_basever}-zen${_zenver}.patch"
        lzma -df ${srcdir}/${_basever}-zen${_zenver}.patch.lzma
        cd ${srcdir}/linux-${_basever} || return 1
        patch -Np1 -i ${srcdir}/${_basever}-zen${_zenver}.patch || return 1
  fi

    # Applying ZEN drm-next patch
    if [ "$_arch_patch" == "1" ]; then
        echo "Applying patch-${pkgver}-${_archver}-ARCH"
        cd ${srcdir}/linux-${_basever} || return 1
        patch -Np1 -i ${srcdir}/patch-${pkgver}-${_archver}-ARCH || return 1
    fi

  patch -Np1 -i ${srcdir}/0001-block-prepare-I-O-context-code-for-BFQ.patch || return 1
  patch -Np1 -i ${srcdir}/0002-block-add-cgroups-kconfig-and-build-bits-for-BFQ.patch || return 1
  patch -Np1 -i ${srcdir}/0003-block-introduce-the-BFQ-I-O-scheduler.patch || return 1

  # remove extraversion
  sed -i 's|^EXTRAVERSION = .*$|EXTRAVERSION =|g' Makefile

  # load configuration for i686 or x86_64
  if [ "$CARCH" = "x86_64" ]; then
     cat ../config.x86_64 > ./.config
  else
     cat ../config > ./.config
  fi

  # get kernel version
  make prepare
  _kernver="$(make kernelrelease)"

  # configure kernel
  if [ "$_menuconfig" = "1" ]; then
     make localmodconfig
  fi
  yes "" | make config

  # fuck CONFIG_LOCALVERSION_AUTO!
  sed -i 's|CONFIG_LOCALVERSION_AUTO=.*|CONFIG_LOCALVERSION_AUTO=n|' .config

  if [ "$_keep_source_code" = "1" ]; then
     echo -n "Copying source code..."
     # Keep the source code   
     cd ${startdir} || return 1
     mkdir -p ${pkgdir}/usr/src || return 1
     cp -a ${srcdir}/linux-${_basever} ${pkgdir}/usr/src/linux-${_kernver} || return 1
    
     #Add a link from the modules directory
     mkdir -p ${pkgdir}/lib/modules/${_kernver} || return 1
     cd ${pkgdir}/lib/modules/${_kernver} || return 1
     rm -Rf source
     ln -s ../../../usr/src/linux-${_kernver} source || return 1
     echo "OK"
  fi

  cd ${srcdir}/linux-${_basever}
  # build kernel
  make bzImage modules || return 1
  mkdir -p ${pkgdir}/{lib/modules,boot}
  make INSTALL_MOD_PATH=${pkgdir} modules_install || return 1
  install -D -m644 System.map ${pkgdir}/boot/System.map26-zen
  install -D -m644 arch/${KARCH}/boot/bzImage ${pkgdir}/boot/vmlinuz26-zen
  install -D -m644 Makefile ${pkgdir}/usr/src/linux-${_kernver}/Makefile
  install -D -m644 kernel/Makefile ${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile
  install -D -m644 .config ${pkgdir}/usr/src/linux-${_kernver}/.config
  install -D -m644 .config ${pkgdir}/boot/kconfig26-zen
  install -D -m644 vmlinux ${pkgdir}/usr/src/linux-${_kernver}/vmlinux

  #install teh headers!

  mkdir -p ${pkgdir}/lib/modules/${_kernver}
  cd ${pkgdir}/lib/modules/${_kernver}
  rm -f source build
  ln -sf ../../../usr/src/linux-${_kernver} build
  cd ${srcdir}/linux-$_basever
  install -D -m644 Makefile \
    ${pkgdir}/usr/src/linux-${_kernver}/Makefile
  install -D -m644 kernel/Makefile \
    ${pkgdir}/usr/src/linux-${_kernver}/kernel/Makefile
  install -D -m644 .config \
    ${pkgdir}/usr/src/linux-${_kernver}/.config
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include

  for i in acpi asm-generic config generated linux math-emu media net pcmcia scsi sound trace video; do
    cp -a include/$i ${pkgdir}/usr/src/linux-${_kernver}/include/
  done

  # copy arch includes for external modules
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/x86
  cp -a arch/x86/include ${pkgdir}/usr/src/linux-${_kernver}/arch/x86/

  # copy files necessary for later builds, like nvidia and vmware
  cp Module.symvers ${pkgdir}/usr/src/linux-${_kernver}
  cp -a scripts ${pkgdir}/usr/src/linux-${_kernver}
  # fix permissions on scripts dir
  chmod og-w -R ${pkgdir}/usr/src/linux-${_kernver}/scripts
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/.tmp_versions

  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel

  cp arch/$KARCH/Makefile ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
  if [ "$CARCH" = "i686" ]; then
    cp arch/$KARCH/Makefile_32.cpu ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/
  fi
  cp arch/$KARCH/kernel/asm-offsets.s ${pkgdir}/usr/src/linux-${_kernver}/arch/$KARCH/kernel/

  # add headers for lirc package
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video
  cp drivers/media/video/*.h  ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/
  for i in bt8xx cpia2 cx25840 cx88 em28xx et61x251 pwc saa7134 sn9c102 usbvideo zc0301; do
   mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
   cp -a drivers/media/video/$i/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/video/$i
  done
  # add docbook makefile
  install -D -m644 Documentation/DocBook/Makefile \
    ${pkgdir}/usr/src/linux-${_kernver}/Documentation/DocBook/Makefile
  # add dm headers
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
  cp drivers/md/*.h  ${pkgdir}/usr/src/linux-${_kernver}/drivers/md
  # add inotify.h
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/linux
  cp include/linux/inotify.h ${pkgdir}/usr/src/linux-${_kernver}/include/linux/
  # add wireless headers
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
  cp net/mac80211/*.h ${pkgdir}/usr/src/linux-${_kernver}/net/mac80211/
  # add dvb headers for external modules
  # in reference to:
  # [url]http://bugs.archlinux.org/task/9912[/url]
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core
  cp drivers/media/dvb/dvb-core/*.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/dvb-core/
  # add dvb headers for external modules
  # in reference to:
  # [url]http://bugs.archlinux.org/task/11194[/url]
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
  cp include/config/dvb/*.h ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
  # add dvb headers for [url]http://mcentral.de/hg/~mrec/em28xx-new[/url]
  # in reference to:
  # [url]http://bugs.archlinux.org/task/13146[/url]
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
  cp drivers/media/dvb/frontends/lgdt330x.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
  cp drivers/media/video/msp3400-driver.h ${pkgdir}/usr/src/linux-${_kernver}/drivers/media/dvb/frontends/
  # add xfs and shmem for aufs building
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs
  mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/mm
  cp fs/xfs/xfs_sb.h ${pkgdir}/usr/src/linux-${_kernver}/fs/xfs/xfs_sb.h
  # add headers vor virtualbox
  # in reference to:
  # [url]http://bugs.archlinux.org/task/14568[/url]
  cp -a include/drm $pkgdir/usr/src/linux-${_kernver}/include/
  # add headers for broadcom wl
  # in reference to:
  # [url]http://bugs.archlinux.org/task/14568[/url]
  cp -a include/trace $pkgdir/usr/src/linux-${_kernver}/include/
  # copy in Kconfig files
  for i in `find . -name "Kconfig*"`; do 
    mkdir -p ${pkgdir}/usr/src/linux-${_kernver}/`echo $i | sed 's|/Kconfig.*||'`
    cp $i ${pkgdir}/usr/src/linux-${_kernver}/$i
  done

  chown -R root.root ${pkgdir}/usr/src/linux-${_kernver}
  find ${pkgdir}/usr/src/linux-${_kernver} -type d -exec chmod 755 {} \;
  # remove unneeded architectures
  rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,xtensa}

  # install fallback mkinitcpio-kernel26-zen.conf file and preset file for kernel
  install -m644 -D ${srcdir}/${pkgname}.preset ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset || return 1
  install -m644 -D ${srcdir}/mkinitcpio-${pkgname}.conf ${pkgdir}/etc/mkinitcpio-zen.conf || return 1

  # set correct depmod command for install
  sed \
     -e  "s/KERNEL_NAME=.*/KERNEL_NAME=${pkgname}/g" \
     -e  "s/KERNEL_VERSION=.*/KERNEL_VERSION=${_kernver}/g" \
     -i ${startdir}/${pkgname}.install
  sed \
     -e "s|source .*|source /etc/mkinitcpio.d/${pkgname}.kver|g" \
     -e "s|default_image=.*|default_image=\"/boot/${pkgname}.img\"|g" \
     -e "s|fallback_image=.*|fallback_image=\"/boot/${pkgname}-fallback.img\"|g" \
     -i ${pkgdir}/etc/mkinitcpio.d/${pkgname}.preset

  echo -e "# DO NOT EDIT THIS FILE\nALL_kver='${_kernver}'" > ${pkgdir}/etc/mkinitcpio.d/${pkgname}.kver

  if [ "$_keep_source_code" = "0" ]; then
     # remove unneeded architectures   
     rm -rf ${pkgdir}/usr/src/linux-${_kernver}/arch/{alpha,arm,arm26,avr32,blackfin,cris,frv,h8300,ia64,m32r,m68k,m68knommu,mips,microblaze,mn10300,parisc,powerpc,ppc,s390,sh,sh64,sparc,sparc64,um,v850,xtensa}
  fi

  # Delete firmware directory
  rm -rf ${pkgdir}/lib/firmware
}

And when I'm compiling, it always aborts at
cp include/config/dvb/*.h ${pkgdir}/usr/src/linux-${_kernver}/include/config/dvb/
'cause there are no files in /src/include/config/dvb/. I copied the ones from my kernel-header and it works fine, but I thought maybe this has something to do with my problem.

I appreciate your help.

Offline

#10 2010-08-17 16:09:40

lucke
Member
From: Poland
Registered: 2004-11-30
Posts: 4,018

Re: zen-kernel: no init found

If it aborts, then it doesn't finish creating the package...? If it finishes correctly and pacman -Ql kernel26-zen shows similar stuff pacman -Ql kernel26 would show and you have proper entry in menu.lst, I don't know what's the problem.

I can give you my kernel26-zen-2.6.34-1-i686.pkg.tar.gz package if you want (and use i686), built with a more or less stock config. You can also just try building the package as it is in AUR, without modifying the config.

Offline

#11 2010-08-17 17:25:44

tomk
Forum Fellow
From: Ireland
Registered: 2004-07-21
Posts: 9,839

Re: zen-kernel: no init found

WeeMan - please use forum code tags, not quote tags, when posting PKGBUILDs etc.

I have fixed it for you this time.

Offline

#12 2010-08-17 17:58:54

WeeMan
Member
Registered: 2010-08-16
Posts: 16

Re: zen-kernel: no init found

Sorry for that, I did not now the scrollbar only shows up when using the code-tag.

My menu.lst file:

# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst

# DEVICE NAME CONVERSIONS 
#
#  Linux           Grub
# -------------------------
#  /dev/fd0        (fd0)
#  /dev/sda        (hd0)
#  /dev/sdb2       (hd1,1)
#  /dev/sda3       (hd0,2)
#

#  FRAMEBUFFER RESOLUTION SETTINGS
#     +-------------------------------------------------+
#          | 640x480    800x600    1024x768   1280x1024
#      ----+--------------------------------------------
#      256 | 0x301=769  0x303=771  0x305=773   0x307=775
#      32K | 0x310=784  0x313=787  0x316=790   0x319=793
#      64K | 0x311=785  0x314=788  0x317=791   0x31A=794
#      16M | 0x312=786  0x315=789  0x318=792   0x31B=795
#     +-------------------------------------------------+
#  for more details and different resolutions see
#  [url]http://wiki.archlinux.org/index.php/GRUB#Framebuffer_Resolution[/url] 

# general configuration:
timeout   5
default   0
color light-blue/black light-cyan/blue

# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
#
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
#
#-*

# (0) Arch Linux
title  Arch Linux Zen Kernel
root   (hd0,0)
kernel /vmlinuz26-zen root=/dev/sda1 ro vga=791
initrd /kernel26-zen.img

# (1) Arch Linux
title  Arch Linux Zen Kernel Fallback
root   (hd0,0)
kernel /vmlinuz26-zen root=/dev/sda1 ro vga=791
initrd /kernel26-zen-fallback.img

# (2) Arch Linux
title  Arch Linux
root   (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/0e005641-5ab2-4dfd-b820-6efea6e48391 ro vga=791
initrd /kernel26.img

# (3) Arch Linux
title  Arch Linux Fallback
root   (hd0,0)
kernel /vmlinuz26 root=/dev/disk/by-uuid/0e005641-5ab2-4dfd-b820-6efea6e48391 ro vga=791
initrd /kernel26-fallback.img

Offline

#13 2010-08-17 18:10:23

lucke
Member
From: Poland
Registered: 2004-11-30
Posts: 4,018

Re: zen-kernel: no init found

Are you positive your root partition is on /dev/sda1? You could try root=/dev/disk/by-uuid/0e005641-5ab2-4dfd-b820-6efea6e48391 instead, as in the stock kernel entry.

Offline

#14 2010-08-17 18:38:15

WeeMan
Member
Registered: 2010-08-16
Posts: 16

Re: zen-kernel: no init found

Yes, /dev/sda1 is my root partition, but I changed menu.lst and rebooted:

VFS: Can not open root device "dev/disk/by-uuid/0e005641-5ab2-4dfd-b820-6efea6e48391" or unknown-block(0,0)
Please append a correct root boot option; here are the available partitions:
0800         19535040 sda driver sd
  9891       104391 sda1
[..]

It's like somebody doesn't want me to switch the kernel :-D.

Offline

#15 2010-08-18 01:34:41

72linus
Member
From: gordonsville,va
Registered: 2009-03-14
Posts: 144
Website

Re: zen-kernel: no init found

whenever I tried to have the zen kernel build via packer or PKGBUILD it always failed
finally i compiled it myself

Here is the 2.6.34 zen kernel source I use; they are livecd kernel kits with source
http://multidistro.com/NFLUXNEW/SQ4/kki … -arch.html

if you just want kernel source its here;
http://multidistro.com/NFLUXNEW/SQ4/kkits/x86.html

works great on both ARCH and slackware!

Offline

#16 2010-08-18 02:25:52

WeeMan
Member
Registered: 2010-08-16
Posts: 16

Re: zen-kernel: no init found

Does it already include BFQ? If not, how can I patch the source to use it?

Thanks a lot for all the help.

Offline

#17 2010-08-18 11:05:00

72linus
Member
From: gordonsville,va
Registered: 2009-03-14
Posts: 144
Website

Re: zen-kernel: no init found

no, I think it doesn't as it is now, the source .config in mine is setup for everything
just do
make menuconfig and choose whatever
it is the same exact kernel source from AUR

however; I found these bfq patches for it
http://algo.ing.unimo.it/people/paolo/d … 6.34-zen1/

Last edited by 72linus (2010-08-18 11:09:03)

Offline

#18 2010-08-18 11:26:36

72linus
Member
From: gordonsville,va
Registered: 2009-03-14
Posts: 144
Website

Re: zen-kernel: no init found

ok, so I just applied the patches and am gonna compil kernel

patch -p1 < ../0001-block-prepare-I-O-context-code-for-BFQ.patch
patch -p1 < ../0002-block-add-cgroups-kconfig-and-build-bits-for-BFQ.patch
patch -p1 < ../0003-block-introduce-the-BFQ-I-O-scheduler.patch

and i adjust the IO Schedulers section of kernel and set bfq to y??
thats what i did

is bfq that much better than cfq or what?

Offline

#19 2010-08-29 11:18:14

WeeMan
Member
Registered: 2010-08-16
Posts: 16

Re: zen-kernel: no init found

Got things working. I compiled from source und used localmodconfig, not as lightweight as i wanted but ok.
Thanks for all the help!

[SOLVED]

Last edited by WeeMan (2010-08-29 11:18:36)

Offline

Board footer

Powered by FluxBB