You are not logged in.

#1 2010-08-25 12:17:44

BBBB
Member
Registered: 2010-04-06
Posts: 6

problems getting lm_sensors and fan speed to work

Hello everyone.
First of all, sorry for my poor English.
I'm trying to run lm_sensors, so 'you can get the cpu fan speed, as explained by Wiki
http://wiki.archlinux.org/index.php/Lm_sensors
http://wiki.archlinux.org/index.php/Fan_Speed_Control

by

yes | sensors-detect

I need to back load the modules and w83627hf lm90
but modprobe w83627hf gives me Device or resource busy though
lsmod | grep-i w836 never returned to anything (module not loaded.)

I get this when launching sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +54.1 ° C (crit = +85.0 ° C)

lm90-i2c-0-4c
Adapter: SMBus Via Pro adapter at 0500
temp1: +44.0 ° C (low = +0.0 ° C, high = +70.0 ° C)
                      (Crit = +120.0 ° C, HYST = +110.0 ° C)
temp2: +50.0 ° C (low = +0.0 ° C, high = +70.0 ° C)
                      (Crit = +120.0 ° C, HYST = +110.0 ° C)

thanks for help.

Offline

Board footer

Powered by FluxBB