Arch Linux

Wyrm88

Member

Registered: 2010-05-05

Posts: 53

HP Deskjet D2560 - problem

Hi!

I was following the CUPS article on the wiki, so I installed cups, hplip, blacklisted the usblp in /etc/rc.conf, but when I turn the printer on, I can't use it, nor is it detected at the CUPS website.

lsusb:

┌─[wyrm88 @ 13:52:30]
└─[~] > lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 03f0:0024 Hewlett-Packard KU-0316 Keyboard
Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 03f0:1e04 Hewlett-Packard 
Bus 001 Device 005: ID 1286:1fab Marvell Semiconductor, Inc. 88W8338 [Libertas] 802.11g
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

It's the device #6.

dmesg (only the important bit):

usb 1-3: new high speed USB device using ehci_hcd and address 6

tail /var/log/messages.log:

┌─[wyrm88 @ 13:59:45]
└─[~] > sudo tail /var/log/messages.log
Password: 
Sep 22 13:51:56 localhost kernel: usb 1-3: USB disconnect, address 4
Sep 22 13:51:59 localhost kernel: usb 1-3: new high speed USB device using ehci_hcd and address 6
Sep 22 13:51:59 localhost load-modules.sh: Not loading module 'usblp' for alias 'usb:v03F0p1E04d0100dc00dsc00dp00ic07isc01ip02' because it is blacklisted
Sep 22 13:52:47 localhost kernel: Machine check events logged
Sep 22 13:52:47 localhost kernel: Machine check events logged
Sep 22 13:53:11 localhost kernel: fuse init (API version 7.14)
Sep 22 13:53:27 localhost kernel: lo: Disabled Privacy Extensions
Sep 22 13:57:47 localhost kernel: CPU0: Temperature/speed normal
Sep 22 13:57:47 localhost kernel: CPU1: Temperature/speed normal
Sep 22 14:00:17 localhost kernel: Machine check events logged

Any help appreciated.