You are not logged in.

Pages: 1

#1 2010-11-04 20:24:56

kismet010
Member
Registered: 2009-09-02
Posts: 137

[solved] disable touchpad

Hi all.

I'm trying to disable the touchpad from my laptop (Sony Vaio E)
When I run

synclient TouchpadOff=1

I get this

Couldn't find synaptics properties. No synaptics driver loaded?

I have installed xf86-input-synaptics and xf86-input-evdev.. so, any help?

Last edited by kismet010 (2010-11-14 20:10:56)

Offline

#2 2010-11-11 16:02:11

ChoK
Member
From: France
Registered: 2008-10-01
Posts: 346

Re: [solved] disable touchpad

you need to enable SHMConfig to control your touchpad via synclient

Option "SHMConfig" "on" in the touchpad section of your relevant xorg config file (either /etc/X11/xorg.conf or /etc/X11/xorg.conf.d/10-synaptics.conf)

then check if the option is enabled in /var/log/Xorg.0.log

Ah, good taste! What a dreadful thing! Taste is the enemy of creativeness.
Picasso
Perfection is reached, not when there is no longer anything to add, but when there is no longer anything to take away.
Saint Exupéry

Offline

#3 2010-11-11 19:08:55

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

still doesn't work

this is my log

[    23.049] 
X.Org X Server 1.9.2
Release Date: 2010-10-30
[    23.050] X Protocol Version 11, Revision 0
[    23.051] Build Operating System: Linux 2.6.35-ARCH x86_64 
[    23.052] Current Operating System: Linux delorean 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 21:22:26 CEST 2010 x86_64
[    23.054] Kernel command line: root=/dev/sda5 ro nomodeset vga=1008
[    23.055] Build Date: 01 November 2010  10:19:41PM
[    23.056]  
[    23.056] Current version of pixman: 0.18.4
[    23.057]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    23.058] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.062] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 11 20:04:26 2010
[    23.083] (==) Using config file: "/etc/X11/xorg.conf"
[    23.084] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    23.105] (==) ServerLayout "aticonfig Layout"
[    23.105] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    23.105] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    23.105] (**) |   |-->Device "aticonfig-Device[0]-0"
[    23.105] (**) Option "Xinerama" "off"
[    23.105] (==) Automatically adding devices
[    23.105] (==) Automatically enabling devices
[    23.175] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    23.175]     Entry deleted from font path.
[    23.213] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    23.213]     Entry deleted from font path.
[    23.213]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    23.213] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    23.213]     Entry deleted from font path.
[    23.213]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    23.213] (**) FontPath set to:
    /usr/share/fonts/local/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
[    23.213] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.213] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.213] (II) Loader magic: 0x7d3360
[    23.213] (II) Module ABI versions:
[    23.213]     X.Org ANSI C Emulation: 0.4
[    23.213]     X.Org Video Driver: 8.0
[    23.213]     X.Org XInput driver : 11.0
[    23.213]     X.Org Server Extension : 4.0
[    23.215] (--) PCI:*(0:1:0:0) 1002:68c1:104d:9071 rev 0, Mem @ 0xe0000000/268435456, 0xf0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    23.215] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    23.215] (II) "extmod" will be loaded by default.
[    23.215] (II) "dbe" will be loaded by default.
[    23.215] (II) "glx" will be loaded by default.
[    23.215] (II) "record" will be loaded by default.
[    23.215] (II) "dri" will be loaded by default.
[    23.215] (II) "dri2" will be loaded by default.
[    23.215] (II) LoadModule: "extmod"
[    23.259] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    23.271] (II) Module extmod: vendor="X.Org Foundation"
[    23.271]     compiled for 1.9.2, module version = 1.0.0
[    23.271]     Module class: X.Org Server Extension
[    23.271]     ABI class: X.Org Server Extension, version 4.0
[    23.271] (II) Loading extension MIT-SCREEN-SAVER
[    23.271] (II) Loading extension XFree86-VidModeExtension
[    23.271] (II) Loading extension XFree86-DGA
[    23.271] (II) Loading extension DPMS
[    23.271] (II) Loading extension XVideo
[    23.271] (II) Loading extension XVideo-MotionCompensation
[    23.271] (II) Loading extension X-Resource
[    23.271] (II) LoadModule: "dbe"
[    23.271] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    23.283] (II) Module dbe: vendor="X.Org Foundation"
[    23.283]     compiled for 1.9.2, module version = 1.0.0
[    23.283]     Module class: X.Org Server Extension
[    23.284]     ABI class: X.Org Server Extension, version 4.0
[    23.284] (II) Loading extension DOUBLE-BUFFER
[    23.284] (II) LoadModule: "glx"
[    23.284] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.299] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[    23.299]     compiled for 7.6.0, module version = 1.0.0
[    23.300] (II) Loading extension GLX
[    23.300] (II) LoadModule: "record"
[    23.300] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    23.306] (II) Module record: vendor="X.Org Foundation"
[    23.306]     compiled for 1.9.2, module version = 1.13.0
[    23.306]     Module class: X.Org Server Extension
[    23.306]     ABI class: X.Org Server Extension, version 4.0
[    23.306] (II) Loading extension RECORD
[    23.306] (II) LoadModule: "dri"
[    23.307] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    23.326] (II) Module dri: vendor="X.Org Foundation"
[    23.326]     compiled for 1.9.2, module version = 1.0.0
[    23.326]     ABI class: X.Org Server Extension, version 4.0
[    23.326] (II) Loading extension XFree86-DRI
[    23.326] (II) LoadModule: "dri2"
[    23.327] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    23.327] (II) Module dri2: vendor="X.Org Foundation"
[    23.327]     compiled for 1.9.2, module version = 1.2.0
[    23.327]     ABI class: X.Org Server Extension, version 4.0
[    23.327] (II) Loading extension DRI2
[    23.327] (II) LoadModule: "fglrx"
[    23.327] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    23.496] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    23.496]     compiled for 1.4.99.906, module version = 8.78.6
[    23.496]     Module class: X.Org Video Driver
[    23.502] (II) Loading sub module "fglrxdrm"
[    23.502] (II) LoadModule: "fglrxdrm"
[    23.502] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    23.554] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    23.554]     compiled for 1.8.99.905, module version = 8.78.6
[    23.554] (II) ATI Proprietary Linux Driver Version Identifier:8.78.6
[    23.554] (II) ATI Proprietary Linux Driver Release Identifier: 8.783                                
[    23.554] (II) ATI Proprietary Linux Driver Build Date: Oct  5 2010 21:22:57
[    23.554] (--) using VT number 7

[    23.668] (WW) Falling back to old probe method for fglrx
[    23.710] (II) Loading PCS database from /etc/ati/amdpcsdb
[    23.711] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[    23.712] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    23.712] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    23.712] (II) AMD Video driver is signed
[    23.713] (II) fglrx(0): pEnt->device->identifier=0x1cded50
[    23.713] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[    23.713] (II) Loading sub module "vgahw"
[    23.713] (II) LoadModule: "vgahw"
[    23.713] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    23.742] (II) Module vgahw: vendor="X.Org Foundation"
[    23.742]     compiled for 1.9.2, module version = 0.1.0
[    23.742]     ABI class: X.Org Video Driver, version 8.0
[    23.742] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    23.742] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    23.742] (==) fglrx(0): Default visual is TrueColor
[    23.742] (**) fglrx(0): Option "DPMS" "true"
[    23.742] (==) fglrx(0): RGB weight 888
[    23.742] (II) fglrx(0): Using 8 bits per RGB 
[    23.742] (==) fglrx(0): Buffer Tiling is ON
[    23.742] (II) Loading sub module "fglrxdrm"
[    23.742] (II) LoadModule: "fglrxdrm"
[    23.742] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    23.743] ukiDynamicMajor: found major device number 252
[    23.743] ukiDynamicMajor: found major device number 252
[    23.743] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    23.743] ukiOpenDevice: node name is /dev/ati/card0
[    23.744] ukiOpenDevice: open result is 10, (OK)
[    23.744] ukiOpenByBusid: ukiOpenMinor returns 10
[    23.744] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    23.744] (==) fglrx(0): NoAccel = NO
[    23.744] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[    23.744] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5600/5700 Series" (Chipset = 0x68c1)
[    23.744] (--) fglrx(0): (PciSubVendor = 0x104d, PciSubDevice = 0x9071)
[    23.744] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    23.744] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[    23.744] (--) fglrx(0): MMIO registers at 0xf0020000
[    23.744] (--) fglrx(0): I/O port at 0x0000d000
[    23.744] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    23.774] (II) fglrx(0): AC Adapter is used
[    23.777] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    23.778] (II) Loading sub module "vbe"
[    23.778] (II) LoadModule: "vbe"
[    23.778] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    23.790] (II) Module vbe: vendor="X.Org Foundation"
[    23.790]     compiled for 1.9.2, module version = 1.1.0
[    23.790]     ABI class: X.Org Video Driver, version 8.0
[    23.790] (II) fglrx(0): VESA BIOS detected
[    23.790] (II) fglrx(0): VESA VBE Version 3.0
[    23.790] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    23.790] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    23.790] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[    23.790] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    23.790] (II) fglrx(0): VESA VBE OEM Product: MADISON
[    23.790] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    23.829] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    23.829] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[    23.829] (II) fglrx(0): PCIE card detected
[    23.829] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    23.829] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    23.830] (II) fglrx(0): Using adapter: 1:0.0.
[    23.862] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[    23.921] (II) fglrx(0): Interrupt handler installed at IRQ 49.
[    23.921] (II) fglrx(0): RandR 1.2 support is enabled!
[    23.921] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    23.921] (==) fglrx(0): Center Mode is disabled 
[    23.921] (II) Loading sub module "fb"
[    23.921] (II) LoadModule: "fb"
[    23.921] (II) Loading /usr/lib/xorg/modules/libfb.so
[    23.928] (II) Module fb: vendor="X.Org Foundation"
[    23.928]     compiled for 1.9.2, module version = 1.0.0
[    23.928]     ABI class: X.Org ANSI C Emulation, version 0.4
[    23.928] (==) fglrx(0): Active stereo disabled
[    23.928] (II) Loading sub module "ddc"
[    23.928] (II) LoadModule: "ddc"
[    23.928] (II) Module "ddc" already built-in
[    23.990] (II) fglrx(0): Finished Initialize PPLIB!
[    23.990] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    23.990] (II) fglrx(0): Output DFP1 has no monitor section
[    23.990] (II) fglrx(0): Output CRT1 has no monitor section
[    23.990] (II) Loading sub module "ddc"
[    23.990] (II) LoadModule: "ddc"
[    23.990] (II) Module "ddc" already built-in
[    23.990] (II) fglrx(0): Connected Display0: LVDS
[    23.990] (II) fglrx(0): Display0 EDID data ---------------------------
[    23.990] (II) fglrx(0): Manufacturer: SNY  Model: 5fa  Serial#: 0
[    23.990] (II) fglrx(0): Year: 2009  Week: 4
[    23.990] (II) fglrx(0): EDID Version: 1.3
[    23.990] (II) fglrx(0): Digital Display Input
[    23.990] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    23.990] (II) fglrx(0): Gamma: 2.20
[    23.990] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    23.990] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:2:2
[    23.990] (II) fglrx(0): First detailed timing is preferred mode
[    23.990] (II) fglrx(0): redX: 0.640 redY: 0.340   greenX: 0.300 greenY: 0.600
[    23.990] (II) fglrx(0): blueX: 0.149 blueY: 0.060   whiteX: 0.312 whiteY: 0.328
[    23.990] (II) fglrx(0): Manufacturer's mask: 0
[    23.990] (II) fglrx(0): Supported detailed timing:
[    23.990] (II) fglrx(0): clock: 72.0 MHz   Image Size:  340 x 190 mm
[    23.990] (II) fglrx(0): h_active: 1366  h_sync: 1395  h_sync_end 1453 h_blank_end 1540 h_border: 0
[    23.990] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 774 v_blanking: 780 v_border: 0
[    23.990] (II) fglrx(0): Supported detailed timing:
[    23.990] (II) fglrx(0): clock: 60.3 MHz   Image Size:  340 x 190 mm
[    23.990] (II) fglrx(0): h_active: 1366  h_sync: 1392  h_sync_end 1445 h_blank_end 1526 h_border: 0
[    23.990] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 778 v_blanking: 790 v_border: 0
[    23.990] (II) fglrx(0): EDID (in hex):
[    23.990] (II) fglrx(0):     00ffffffffffff004dd9fa0500000000
[    23.990] (II) fglrx(0):     0413010380221378f2ce50a3574c9926
[    23.990] (II) fglrx(0):     0f505400000001010101010101010101
[    23.990] (II) fglrx(0):     010101010101201c56ae50000c301d3a
[    23.990] (II) fglrx(0):     240054be100000008c1756a050001630
[    23.990] (II) fglrx(0):     1a35370054be10000000000000000000
[    23.990] (II) fglrx(0):     00000000000000000000000000000000
[    23.990] (II) fglrx(0):     00000000000000000000000000000081
[    23.990] (II) fglrx(0): End of Display0 EDID data --------------------
[    23.997] (II) fglrx(0): EDID vendor "SNY", prod id 1530
[    23.997] (II) fglrx(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[    23.997] (II) fglrx(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[    23.997] (II) fglrx(0): Printing DDC gathered Modelines:
[    23.997] (II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1395 1453 1540  768 770 774 780 -hsync -vsync (46.8 kHz)
[    23.997] (II) fglrx(0): Modeline "1366x768"x0.0   60.28  1366 1392 1445 1526  768 771 778 790 -hsync -vsync (39.5 kHz)
[    23.997] (II) fglrx(0): Output LVDS connected
[    23.997] (II) fglrx(0): Output DFP1 disconnected
[    23.997] (II) fglrx(0): Output CRT1 disconnected
[    23.997] (II) fglrx(0): Using exact sizes for initial modes
[    23.997] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    23.998] (II) fglrx(0): Display dimensions: (340, 190) mm
[    23.998] (II) fglrx(0): DPI set to (102, 102)
[    23.998] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5600/5700 Series has 2 configurable heads and 1 displays connected.
[    23.998] (==) fglrx(0):  PseudoColor visuals disabled
[    23.998] (II) Loading sub module "ramdac"
[    23.998] (II) LoadModule: "ramdac"
[    23.998] (II) Module "ramdac" already built-in
[    23.998] (==) fglrx(0): NoDRI = NO
[    23.998] (==) fglrx(0): Capabilities: 0x00000000
[    23.998] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    23.998] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    23.998] (==) fglrx(0): UseFastTLS=0
[    23.998] (==) fglrx(0): BlockSignalsOnLock=1
[    23.998] (--) Depth 24 pixmap format is 32 bpp
[    23.998] (II) Loading extension ATIFGLRXDRI
[    23.998] (II) fglrx(0): doing swlDriScreenInit
[    23.998] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    23.998] ukiDynamicMajor: found major device number 252
[    23.998] ukiDynamicMajor: found major device number 252
[    23.998] ukiDynamicMajor: found major device number 252
[    23.998] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    23.998] ukiOpenDevice: node name is /dev/ati/card0
[    23.998] ukiOpenDevice: open result is 15, (OK)
[    23.998] ukiOpenByBusid: ukiOpenMinor returns 15
[    23.998] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    23.998] (II) fglrx(0): [uki] DRM interface version 1.0
[    23.998] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    23.998] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    23.998] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f10e3ca5000
[    23.998] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    23.998] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    23.998] (II) fglrx(0): swlDriScreenInit done
[    23.998] (II) fglrx(0): Kernel Module Version Information:
[    23.998] (II) fglrx(0):     Name: fglrx
[    23.998] (II) fglrx(0):     Version: 8.78.6
[    23.998] (II) fglrx(0):     Date: Oct  5 2010
[    23.998] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    23.998] (II) fglrx(0): Kernel Module version matches driver.
[    23.998] (II) fglrx(0): Kernel Module Build Time Information:
[    23.998] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.35-ARCH
[    23.998] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[    23.998] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[    23.998] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    23.998] (II) fglrx(0): [uki] register handle = 0x00004000
[    24.014] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[    24.014] (II) fglrx(0): DRI initialization successfull
[    24.014] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
[    24.014] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
[    24.014] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
[    24.014] (II) fglrx(0): Largest offscreen area available: 1664 x 960
[    24.014] (==) fglrx(0): Backing store disabled
[    24.014] (II) Loading extension FGLRXEXTENSION
[    24.014] (**) fglrx(0): DPMS enabled
[    24.014] (II) fglrx(0): Initialized in-driver Xinerama extension
[    24.014] (**) fglrx(0): Textured Video is enabled.
[    24.014] (II) LoadModule: "glesx"
[    24.014] (II) Loading /usr/lib/xorg/modules/glesx.so
[    24.155] (II) Module glesx: vendor="X.Org Foundation"
[    24.155]     compiled for 1.8.99.905, module version = 1.0.0
[    24.155] (II) Loading extension GLESX
[    24.155] (II) fglrx(0): GLESX enableFlags = 592
[    24.155] (II) fglrx(0): GLESX is enabled
[    24.155] (II) fglrx(0): Acceleration enabled
[    24.155] (II) LoadModule: "amdxmm"
[    24.156] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    24.183] (II) Module amdxmm: vendor="X.Org Foundation"
[    24.183]     compiled for 1.8.99.905, module version = 1.0.0
[    24.184] (II) Loading extension AMDXVOPL
[    24.186] (II) fglrx(0): UVD2 feature is available
[    24.188] (II) fglrx(0): Enable composite support successfully
[    24.188] (WW) fglrx(0): Option "DynamicPM" is not used
[    24.188] (WW) fglrx(0): Option "ClockGating" is not used
[    24.188] (WW) fglrx(0): Option "VendorName" is not used
[    24.188] (WW) fglrx(0): Option "ModelName" is not used
[    24.188] (II) fglrx(0): X context handle = 0x1
[    24.188] (II) fglrx(0): [DRI] installation complete
[    24.188] (==) fglrx(0): Silken mouse enabled
[    24.188] (==) fglrx(0): Using HW cursor of display infrastructure!
[    24.188] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    24.188] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    24.188] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    25.207] (--) RandR disabled
[    25.207] (II) Initializing built-in extension Generic Event Extension
[    25.207] (II) Initializing built-in extension SHAPE
[    25.207] (II) Initializing built-in extension MIT-SHM
[    25.207] (II) Initializing built-in extension XInputExtension
[    25.207] (II) Initializing built-in extension XTEST
[    25.207] (II) Initializing built-in extension BIG-REQUESTS
[    25.207] (II) Initializing built-in extension SYNC
[    25.207] (II) Initializing built-in extension XKEYBOARD
[    25.207] (II) Initializing built-in extension XC-MISC
[    25.207] (II) Initializing built-in extension SECURITY
[    25.207] (II) Initializing built-in extension XINERAMA
[    25.207] (II) Initializing built-in extension XFIXES
[    25.207] (II) Initializing built-in extension RENDER
[    25.207] (II) Initializing built-in extension RANDR
[    25.207] (II) Initializing built-in extension COMPOSITE
[    25.207] (II) Initializing built-in extension DAMAGE
[    25.210] ukiDynamicMajor: found major device number 252
[    25.210] ukiDynamicMajor: found major device number 252
[    25.210] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    25.210] ukiOpenDevice: node name is /dev/ati/card0
[    25.210] ukiOpenDevice: open result is 16, (OK)
[    25.210] ukiOpenByBusid: ukiOpenMinor returns 16
[    25.210] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    25.786] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
[    25.786] (II) GLX: Initialized DRI GL provider for screen 0
[    25.795] (II) fglrx(0): Enable the clock gating!
[    25.795] (II) fglrx(0): Setting screen physical size to 361 x 203
[    26.283] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event6)
[    26.283] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[    26.283] (II) LoadModule: "evdev"
[    26.283] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.287] (II) Module evdev: vendor="X.Org Foundation"
[    26.287]     compiled for 1.9.0, module version = 2.5.0
[    26.287]     Module class: X.Org XInput Driver
[    26.287]     ABI class: X.Org XInput driver, version 11.0
[    26.287] (**) Sony Vaio Keys: always reports core events
[    26.287] (**) Sony Vaio Keys: Device: "/dev/input/event6"
[    26.297] (--) Sony Vaio Keys: Found keys
[    26.297] (II) Sony Vaio Keys: Configuring as keyboard
[    26.297] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[    26.297] (**) Option "xkb_rules" "evdev"
[    26.297] (**) Option "xkb_model" "evdev"
[    26.297] (**) Option "xkb_layout" "us"
[    26.337] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    26.337] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    26.337] (**) Video Bus: always reports core events
[    26.337] (**) Video Bus: Device: "/dev/input/event4"
[    26.356] (--) Video Bus: Found keys
[    26.356] (II) Video Bus: Configuring as keyboard
[    26.356] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    26.356] (**) Option "xkb_rules" "evdev"
[    26.356] (**) Option "xkb_model" "evdev"
[    26.356] (**) Option "xkb_layout" "us"
[    26.358] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    26.358] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.358] (**) Power Button: always reports core events
[    26.358] (**) Power Button: Device: "/dev/input/event3"
[    26.383] (--) Power Button: Found keys
[    26.383] (II) Power Button: Configuring as keyboard
[    26.383] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    26.383] (**) Option "xkb_rules" "evdev"
[    26.383] (**) Option "xkb_model" "evdev"
[    26.383] (**) Option "xkb_layout" "us"
[    26.383] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    26.383] (II) No input driver/identifier specified (ignoring)
[    26.386] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    26.386] (II) No input driver/identifier specified (ignoring)
[    26.391] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    26.391] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    26.391] (**) AT Translated Set 2 keyboard: always reports core events
[    26.391] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    26.433] (--) AT Translated Set 2 keyboard: Found keys
[    26.433] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    26.433] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    26.433] (**) Option "xkb_rules" "evdev"
[    26.433] (**) Option "xkb_model" "evdev"
[    26.433] (**) Option "xkb_layout" "us"
[    26.434] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[    26.434] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[    26.434] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[    26.434] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[    26.460] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[    26.460] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[    26.460] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
[    26.460] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[    26.460] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[    26.460] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[    26.460] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.460] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[    26.460] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[    26.460] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[    26.460] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[    26.460] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[    26.460] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[    26.461] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[    26.461] (II) No input driver/identifier specified (ignoring)
[    26.461] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[    26.461] (II) No input driver/identifier specified (ignoring)
[    26.462] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event7)
[    26.462] (II) No input driver/identifier specified (ignoring)
[    26.463] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
[    26.463] (II) No input driver/identifier specified (ignoring)
[    26.479] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

and my xorg.conf

Section "ServerLayout"
    Identifier     "aticonfig Layout"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Files"
    FontPath     "/usr/share/fonts/local/"
EndSection

Section "Module"
EndSection

Section "ServerFlags"
    Option        "Xinerama" "off"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    Option        "DynamicPM" "on"      # Dynamic powersaving.
    Option        "ClockGating" "on"    # Assisting option for powersaving.
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "InputDevice"
    Identifier    "Synaptics Touchpad"
    Driver        "synaptics"
    Option        "SendCoreEvents"    "true"
    Option        "Protocol"    "auto-dev"
    Option        "TapButton1"    "0"
    Option        "TapButton2"    "0"
    Option        "SHMConfig"    "on"
EndSection

Offline

#4 2010-11-11 21:06:14

Coacher
Guest

Re: [solved] disable touchpad

[    26.462] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event7)
[    26.462] (II) No input driver/identifier specified (ignoring)
[    26.463] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
[    26.463] (II) No input driver/identifier specified (ignoring)
Looks like it is you touchpad. It is called Sony Vaio Jogdial instead of Synaptics toucpad so your config doenst work. Modify the apropriate section(Identifier).

Last edited by Coacher (2010-11-11 21:09:33)

#5 2010-11-11 22:05:48

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

It's not, I'm googleing it:
"Jog Dial, a special kind of mouse wheel that comes with most Sony VAIO notebooks"
jog_dial.jpg

but thanks for your attention

Offline

#6 2010-11-11 22:30:27

Coacher
Guest

Re: [solved] disable touchpad

Hmm. I dont see any detection of touchpad then. Except possible
[    26.434] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
but I believe its a mouse. Isnt it?
BTW, if your laptop has a button for enabling/disabling touchpad try it)

Last edited by Coacher (2010-11-11 22:36:17)

#7 2010-11-11 22:35:02

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

I donn't have any connected external mouse on the laptop
maybe touchpad is detected like that?

how can I determine the exact name to put on xorg.conf?

Offline

#8 2010-11-11 22:46:03

Coacher
Guest

Re: [solved] disable touchpad

Well, if no mouses are connected then it is for sure your touchpad and probably due to bug somewhere it is detected as mouse.
As a workaround you may try this(unable to check so provide feedabck)
Create /etc/X11/xorg.conf.d/10-synaptics.conf like this one:

Section "InputClass"
        Identifier "Synaptics Touchpad catch"
        MatchDevicePath "/dev/input/event*"
        MatchProduct "ImPS/2 Generic Wheel Mouse"
        Driver "synaptics"
          Option        "Optname"             "Optvalue"
EndSection

I believe it should work if you are using xorg-server newer than 1.9. BTW you can delete touchpad section from xorg.conf

Last edited by Coacher (2010-11-11 22:46:48)

#9 2010-11-11 22:49:24

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

now my mouse doesn't work

Offline

#10 2010-11-11 22:52:18

Coacher
Guest

Re: [solved] disable touchpad

Hmm you've said there were no external mice connected when you posted that Xorg.0.log or I got it wrong?

#11 2010-11-11 22:53:44

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

sure, no external connected, cos i haven't tongue

Offline

#12 2010-11-11 22:55:02

Coacher
Guest

Re: [solved] disable touchpad

but how then your mouse doesnt work if you dont have any? big_smile

#13 2010-11-11 22:56:15

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

sorry, i mean "my touchpad doesn't work"

Offline

#14 2010-11-11 22:58:29

Coacher
Guest

Re: [solved] disable touchpad

can you paste your Xorg.0.log now somewhere like pastebin?

#15 2010-11-12 08:05:19

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

do you mean with /etc/X11/xorg.conf.d/10-synaptics.conf you specified?

Offline

#16 2010-11-12 18:57:57

Coacher
Guest

Re: [solved] disable touchpad

I mean your /var/log/Xorg.0.log. As now you have that synaptics.conf added, the log file should' ve changed...

#17 2010-11-13 20:58:56

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

[ 45194.210] 
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 45194.320] X Protocol Version 11, Revision 0
[ 45194.354] Build Operating System: Linux 2.6.35-ARCH x86_64 
[ 45194.388] Current Operating System: Linux delorean 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 21:22:26 CEST 2010 x86_64
[ 45194.424] Kernel command line: root=/dev/sda5 ro nomodeset vga=1008
[ 45194.459] Build Date: 01 November 2010  10:19:41PM
[ 45194.494]  
[ 45194.528] Current version of pixman: 0.18.4
[ 45194.561]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[ 45194.630] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45194.733] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 13 21:57:28 2010
[ 45194.767] (==) Using config file: "/etc/X11/xorg.conf"
[ 45194.801] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 45194.854] (==) ServerLayout "aticonfig Layout"
[ 45194.854] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 45194.854] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[ 45194.854] (**) |   |-->Device "aticonfig-Device[0]-0"
[ 45194.854] (**) Option "Xinerama" "off"
[ 45194.854] (==) Automatically adding devices
[ 45194.854] (==) Automatically enabling devices
[ 45194.854] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 45194.854]     Entry deleted from font path.
[ 45194.854] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 45194.854]     Entry deleted from font path.
[ 45194.854]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 45194.854] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 45194.854]     Entry deleted from font path.
[ 45194.854]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 45194.854] (**) FontPath set to:
    /usr/share/fonts/local/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
[ 45194.854] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 45194.854] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 45194.854] (II) Loader magic: 0x7d3360
[ 45194.854] (II) Module ABI versions:
[ 45194.854]     X.Org ANSI C Emulation: 0.4
[ 45194.854]     X.Org Video Driver: 8.0
[ 45194.854]     X.Org XInput driver : 11.0
[ 45194.854]     X.Org Server Extension : 4.0
[ 45194.856] (--) PCI:*(0:1:0:0) 1002:68c1:104d:9071 rev 0, Mem @ 0xe0000000/268435456, 0xf0020000/131072, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 45194.856] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 45194.856] (II) "extmod" will be loaded by default.
[ 45194.856] (II) "dbe" will be loaded by default.
[ 45194.856] (II) "glx" will be loaded by default.
[ 45194.856] (II) "record" will be loaded by default.
[ 45194.856] (II) "dri" will be loaded by default.
[ 45194.857] (II) "dri2" will be loaded by default.
[ 45194.857] (II) LoadModule: "extmod"
[ 45194.857] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 45194.857] (II) Module extmod: vendor="X.Org Foundation"
[ 45194.857]     compiled for 1.9.2, module version = 1.0.0
[ 45194.857]     Module class: X.Org Server Extension
[ 45194.857]     ABI class: X.Org Server Extension, version 4.0
[ 45194.857] (II) Loading extension MIT-SCREEN-SAVER
[ 45194.857] (II) Loading extension XFree86-VidModeExtension
[ 45194.857] (II) Loading extension XFree86-DGA
[ 45194.857] (II) Loading extension DPMS
[ 45194.857] (II) Loading extension XVideo
[ 45194.857] (II) Loading extension XVideo-MotionCompensation
[ 45194.857] (II) Loading extension X-Resource
[ 45194.857] (II) LoadModule: "dbe"
[ 45194.858] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 45194.876] (II) Module dbe: vendor="X.Org Foundation"
[ 45194.876]     compiled for 1.9.2, module version = 1.0.0
[ 45194.876]     Module class: X.Org Server Extension
[ 45194.876]     ABI class: X.Org Server Extension, version 4.0
[ 45194.876] (II) Loading extension DOUBLE-BUFFER
[ 45194.876] (II) LoadModule: "glx"
[ 45194.877] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 45194.877] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 45194.877]     compiled for 7.6.0, module version = 1.0.0
[ 45194.877] (II) Loading extension GLX
[ 45194.877] (II) LoadModule: "record"
[ 45194.877] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 45194.877] (II) Module record: vendor="X.Org Foundation"
[ 45194.877]     compiled for 1.9.2, module version = 1.13.0
[ 45194.877]     Module class: X.Org Server Extension
[ 45194.877]     ABI class: X.Org Server Extension, version 4.0
[ 45194.877] (II) Loading extension RECORD
[ 45194.877] (II) LoadModule: "dri"
[ 45194.877] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 45194.877] (II) Module dri: vendor="X.Org Foundation"
[ 45194.877]     compiled for 1.9.2, module version = 1.0.0
[ 45194.877]     ABI class: X.Org Server Extension, version 4.0
[ 45194.877] (II) Loading extension XFree86-DRI
[ 45194.877] (II) LoadModule: "dri2"
[ 45194.877] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 45194.878] (II) Module dri2: vendor="X.Org Foundation"
[ 45194.878]     compiled for 1.9.2, module version = 1.2.0
[ 45194.878]     ABI class: X.Org Server Extension, version 4.0
[ 45194.878] (II) Loading extension DRI2
[ 45194.878] (II) LoadModule: "fglrx"
[ 45194.878] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 45194.930] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 45194.930]     compiled for 1.4.99.906, module version = 8.78.6
[ 45194.930]     Module class: X.Org Video Driver
[ 45194.931] (II) Loading sub module "fglrxdrm"
[ 45194.931] (II) LoadModule: "fglrxdrm"
[ 45194.931] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 45194.931] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 45194.931]     compiled for 1.8.99.905, module version = 8.78.6
[ 45194.931] (II) ATI Proprietary Linux Driver Version Identifier:8.78.6
[ 45194.931] (II) ATI Proprietary Linux Driver Release Identifier: 8.783                                
[ 45194.931] (II) ATI Proprietary Linux Driver Build Date: Oct  5 2010 21:22:57
[ 45194.931] (--) using VT number 8

[ 45195.044] (WW) Falling back to old probe method for fglrx
[ 45195.058] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 45195.059] (--) Chipset Supported AMD Graphics Processor (0x68C1) found
[ 45195.059] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 45195.059] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 45195.060] (II) AMD Video driver is signed
[ 45195.060] (II) fglrx(0): pEnt->device->identifier=0x16b7d10
[ 45195.060] (II) fglrx(0): === [xdl_x760_atiddxPreInit] === begin
[ 45195.060] (II) Loading sub module "vgahw"
[ 45195.060] (II) LoadModule: "vgahw"
[ 45195.060] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 45195.060] (II) Module vgahw: vendor="X.Org Foundation"
[ 45195.060]     compiled for 1.9.2, module version = 0.1.0
[ 45195.060]     ABI class: X.Org Video Driver, version 8.0
[ 45195.061] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 45195.061] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 45195.061] (==) fglrx(0): Default visual is TrueColor
[ 45195.061] (**) fglrx(0): Option "DPMS" "true"
[ 45195.061] (==) fglrx(0): RGB weight 888
[ 45195.061] (II) fglrx(0): Using 8 bits per RGB 
[ 45195.061] (==) fglrx(0): Buffer Tiling is ON
[ 45195.061] (II) Loading sub module "fglrxdrm"
[ 45195.061] (II) LoadModule: "fglrxdrm"
[ 45195.061] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 45195.128] ukiDynamicMajor: found major device number 252
[ 45195.128] ukiDynamicMajor: found major device number 252
[ 45195.128] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 45195.128] ukiOpenDevice: node name is /dev/ati/card0
[ 45195.128] ukiOpenDevice: open result is 10, (OK)
[ 45195.128] ukiOpenByBusid: ukiOpenMinor returns 10
[ 45195.128] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 45195.129] (==) fglrx(0): NoAccel = NO
[ 45195.129] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 45195.129] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 5600/5700 Series" (Chipset = 0x68c1)
[ 45195.129] (--) fglrx(0): (PciSubVendor = 0x104d, PciSubDevice = 0x9071)
[ 45195.129] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 45195.129] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 45195.129] (--) fglrx(0): MMIO registers at 0xf0020000
[ 45195.129] (--) fglrx(0): I/O port at 0x0000d000
[ 45195.129] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 45195.160] (II) fglrx(0): AC Adapter is used
[ 45195.164] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 45195.164] (II) Loading sub module "vbe"
[ 45195.164] (II) LoadModule: "vbe"
[ 45195.165] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 45195.165] (II) Module vbe: vendor="X.Org Foundation"
[ 45195.165]     compiled for 1.9.2, module version = 1.1.0
[ 45195.165]     ABI class: X.Org Video Driver, version 8.0
[ 45195.165] (II) fglrx(0): VESA BIOS detected
[ 45195.165] (II) fglrx(0): VESA VBE Version 3.0
[ 45195.165] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 45195.165] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 45195.165] (II) fglrx(0): VESA VBE OEM Software Rev: 12.20
[ 45195.165] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[ 45195.165] (II) fglrx(0): VESA VBE OEM Product: MADISON
[ 45195.165] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 45195.209] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 45195.209] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 45195.209] (II) fglrx(0): PCIE card detected
[ 45195.209] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 45195.209] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 45195.210] (II) fglrx(0): Using adapter: 1:0.0.
[ 45195.342] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 45195.413] (II) fglrx(0): Interrupt handler installed at IRQ 49.
[ 45195.413] (II) fglrx(0): RandR 1.2 support is enabled!
[ 45195.413] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 45195.413] (==) fglrx(0): Center Mode is disabled 
[ 45195.413] (II) Loading sub module "fb"
[ 45195.413] (II) LoadModule: "fb"
[ 45195.413] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 45195.413] (II) Module fb: vendor="X.Org Foundation"
[ 45195.413]     compiled for 1.9.2, module version = 1.0.0
[ 45195.413]     ABI class: X.Org ANSI C Emulation, version 0.4
[ 45195.413] (==) fglrx(0): Active stereo disabled
[ 45195.413] (II) Loading sub module "ddc"
[ 45195.413] (II) LoadModule: "ddc"
[ 45195.413] (II) Module "ddc" already built-in
[ 45195.470] (II) fglrx(0): Finished Initialize PPLIB!
[ 45195.471] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 45195.471] (II) fglrx(0): Output DFP1 has no monitor section
[ 45195.471] (II) fglrx(0): Output CRT1 has no monitor section
[ 45195.471] (II) Loading sub module "ddc"
[ 45195.471] (II) LoadModule: "ddc"
[ 45195.471] (II) Module "ddc" already built-in
[ 45195.471] (II) fglrx(0): Connected Display0: LVDS
[ 45195.471] (II) fglrx(0): Display0 EDID data ---------------------------
[ 45195.471] (II) fglrx(0): Manufacturer: SNY  Model: 5fa  Serial#: 0
[ 45195.471] (II) fglrx(0): Year: 2009  Week: 4
[ 45195.471] (II) fglrx(0): EDID Version: 1.3
[ 45195.471] (II) fglrx(0): Digital Display Input
[ 45195.471] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[ 45195.471] (II) fglrx(0): Gamma: 2.20
[ 45195.471] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 45195.471] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:2:2
[ 45195.471] (II) fglrx(0): First detailed timing is preferred mode
[ 45195.471] (II) fglrx(0): redX: 0.640 redY: 0.340   greenX: 0.300 greenY: 0.600
[ 45195.471] (II) fglrx(0): blueX: 0.149 blueY: 0.060   whiteX: 0.312 whiteY: 0.328
[ 45195.471] (II) fglrx(0): Manufacturer's mask: 0
[ 45195.471] (II) fglrx(0): Supported detailed timing:
[ 45195.471] (II) fglrx(0): clock: 72.0 MHz   Image Size:  340 x 190 mm
[ 45195.471] (II) fglrx(0): h_active: 1366  h_sync: 1395  h_sync_end 1453 h_blank_end 1540 h_border: 0
[ 45195.471] (II) fglrx(0): v_active: 768  v_sync: 770  v_sync_end 774 v_blanking: 780 v_border: 0
[ 45195.471] (II) fglrx(0): Supported detailed timing:
[ 45195.471] (II) fglrx(0): clock: 60.3 MHz   Image Size:  340 x 190 mm
[ 45195.471] (II) fglrx(0): h_active: 1366  h_sync: 1392  h_sync_end 1445 h_blank_end 1526 h_border: 0
[ 45195.471] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 778 v_blanking: 790 v_border: 0
[ 45195.471] (II) fglrx(0): EDID (in hex):
[ 45195.471] (II) fglrx(0):     00ffffffffffff004dd9fa0500000000
[ 45195.471] (II) fglrx(0):     0413010380221378f2ce50a3574c9926
[ 45195.471] (II) fglrx(0):     0f505400000001010101010101010101
[ 45195.471] (II) fglrx(0):     010101010101201c56ae50000c301d3a
[ 45195.471] (II) fglrx(0):     240054be100000008c1756a050001630
[ 45195.471] (II) fglrx(0):     1a35370054be10000000000000000000
[ 45195.471] (II) fglrx(0):     00000000000000000000000000000000
[ 45195.471] (II) fglrx(0):     00000000000000000000000000000081
[ 45195.471] (II) fglrx(0): End of Display0 EDID data --------------------
[ 45195.478] (II) fglrx(0): EDID vendor "SNY", prod id 1530
[ 45195.478] (II) fglrx(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[ 45195.478] (II) fglrx(0): DDCModeFromDetailedTiming: 1366x768 Warning: We only handle separate sync.
[ 45195.478] (II) fglrx(0): Printing DDC gathered Modelines:
[ 45195.478] (II) fglrx(0): Modeline "1366x768"x0.0   72.00  1366 1395 1453 1540  768 770 774 780 -hsync -vsync (46.8 kHz)
[ 45195.478] (II) fglrx(0): Modeline "1366x768"x0.0   60.28  1366 1392 1445 1526  768 771 778 790 -hsync -vsync (39.5 kHz)
[ 45195.478] (II) fglrx(0): Output LVDS connected
[ 45195.478] (II) fglrx(0): Output DFP1 disconnected
[ 45195.478] (II) fglrx(0): Output CRT1 disconnected
[ 45195.478] (II) fglrx(0): Using exact sizes for initial modes
[ 45195.478] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 45195.478] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 45195.478] (II) fglrx(0): DPI set to (102, 102)
[ 45195.478] (II) fglrx(0): Adapter ATI Mobility Radeon HD 5600/5700 Series has 2 configurable heads and 1 displays connected.
[ 45195.478] (==) fglrx(0):  PseudoColor visuals disabled
[ 45195.478] (II) Loading sub module "ramdac"
[ 45195.478] (II) LoadModule: "ramdac"
[ 45195.478] (II) Module "ramdac" already built-in
[ 45195.478] (==) fglrx(0): NoDRI = NO
[ 45195.478] (==) fglrx(0): Capabilities: 0x00000000
[ 45195.478] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 45195.478] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 45195.478] (==) fglrx(0): UseFastTLS=0
[ 45195.478] (==) fglrx(0): BlockSignalsOnLock=1
[ 45195.478] (--) Depth 24 pixmap format is 32 bpp
[ 45195.478] (II) Loading extension ATIFGLRXDRI
[ 45195.478] (II) fglrx(0): doing swlDriScreenInit
[ 45195.479] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 45195.479] ukiDynamicMajor: found major device number 252
[ 45195.479] ukiDynamicMajor: found major device number 252
[ 45195.479] ukiDynamicMajor: found major device number 252
[ 45195.479] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 45195.479] ukiOpenDevice: node name is /dev/ati/card0
[ 45195.479] ukiOpenDevice: open result is 15, (OK)
[ 45195.479] ukiOpenByBusid: ukiOpenMinor returns 15
[ 45195.479] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 45195.479] (II) fglrx(0): [uki] DRM interface version 1.0
[ 45195.479] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 45195.479] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x654b000
[ 45195.479] (II) fglrx(0): [uki] mapped SAREA 0x654b000 to 0x7fdb8f49c000
[ 45195.479] (II) fglrx(0): [uki] framebuffer handle = 0x654c000
[ 45195.479] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 45195.479] (II) fglrx(0): swlDriScreenInit done
[ 45195.479] (II) fglrx(0): Kernel Module Version Information:
[ 45195.479] (II) fglrx(0):     Name: fglrx
[ 45195.479] (II) fglrx(0):     Version: 8.78.6
[ 45195.479] (II) fglrx(0):     Date: Oct  5 2010
[ 45195.479] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[ 45195.479] (II) fglrx(0): Kernel Module version matches driver.
[ 45195.479] (II) fglrx(0): Kernel Module Build Time Information:
[ 45195.479] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.35-ARCH
[ 45195.479] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[ 45195.479] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[ 45195.479] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[ 45195.479] (II) fglrx(0): [uki] register handle = 0x0654d000
[ 45195.495] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[ 45195.495] (II) fglrx(0): DRI initialization successfull
[ 45195.495] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
[ 45195.495] (II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
[ 45195.495] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
[ 45195.495] (II) fglrx(0): Largest offscreen area available: 1664 x 960
[ 45195.495] (==) fglrx(0): Backing store disabled
[ 45195.496] (II) Loading extension FGLRXEXTENSION
[ 45195.496] (**) fglrx(0): DPMS enabled
[ 45195.496] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 45195.496] (**) fglrx(0): Textured Video is enabled.
[ 45195.496] (II) LoadModule: "glesx"
[ 45195.496] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 45195.529] (II) Module glesx: vendor="X.Org Foundation"
[ 45195.529]     compiled for 1.8.99.905, module version = 1.0.0
[ 45195.529] (II) Loading extension GLESX
[ 45195.529] (II) fglrx(0): GLESX enableFlags = 592
[ 45195.529] (II) fglrx(0): GLESX is enabled
[ 45195.529] (II) fglrx(0): Acceleration enabled
[ 45195.529] (II) LoadModule: "amdxmm"
[ 45195.529] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 45195.529] (II) Module amdxmm: vendor="X.Org Foundation"
[ 45195.529]     compiled for 1.8.99.905, module version = 1.0.0
[ 45195.529] (II) Loading extension AMDXVOPL
[ 45195.546] (II) fglrx(0): UVD2 feature is available
[ 45195.548] (II) fglrx(0): Enable composite support successfully
[ 45195.548] (WW) fglrx(0): Option "DynamicPM" is not used
[ 45195.548] (WW) fglrx(0): Option "ClockGating" is not used
[ 45195.548] (WW) fglrx(0): Option "VendorName" is not used
[ 45195.548] (WW) fglrx(0): Option "ModelName" is not used
[ 45195.548] (II) fglrx(0): X context handle = 0x1
[ 45195.548] (II) fglrx(0): [DRI] installation complete
[ 45195.548] (==) fglrx(0): Silken mouse enabled
[ 45195.548] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 45195.548] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 45195.548] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 45195.548] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 45196.567] (--) RandR disabled
[ 45196.567] (II) Initializing built-in extension Generic Event Extension
[ 45196.567] (II) Initializing built-in extension SHAPE
[ 45196.567] (II) Initializing built-in extension MIT-SHM
[ 45196.567] (II) Initializing built-in extension XInputExtension
[ 45196.567] (II) Initializing built-in extension XTEST
[ 45196.567] (II) Initializing built-in extension BIG-REQUESTS
[ 45196.567] (II) Initializing built-in extension SYNC
[ 45196.568] (II) Initializing built-in extension XKEYBOARD
[ 45196.568] (II) Initializing built-in extension XC-MISC
[ 45196.568] (II) Initializing built-in extension SECURITY
[ 45196.568] (II) Initializing built-in extension XINERAMA
[ 45196.568] (II) Initializing built-in extension XFIXES
[ 45196.568] (II) Initializing built-in extension RENDER
[ 45196.568] (II) Initializing built-in extension RANDR
[ 45196.568] (II) Initializing built-in extension COMPOSITE
[ 45196.568] (II) Initializing built-in extension DAMAGE
[ 45196.571] ukiDynamicMajor: found major device number 252
[ 45196.571] ukiDynamicMajor: found major device number 252
[ 45196.571] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 45196.571] ukiOpenDevice: node name is /dev/ati/card0
[ 45196.571] ukiOpenDevice: open result is 16, (OK)
[ 45196.571] ukiOpenByBusid: ukiOpenMinor returns 16
[ 45196.571] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 45196.623] (II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
[ 45196.623] (II) GLX: Initialized DRI GL provider for screen 0
[ 45196.634] (II) fglrx(0): Enable the clock gating!
[ 45196.634] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 45196.993] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event4)
[ 45196.993] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[ 45196.993] (II) LoadModule: "evdev"
[ 45196.994] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 45197.002] (II) Module evdev: vendor="X.Org Foundation"
[ 45197.002]     compiled for 1.9.0, module version = 2.5.0
[ 45197.002]     Module class: X.Org XInput Driver
[ 45197.002]     ABI class: X.Org XInput driver, version 11.0
[ 45197.002] (**) Sony Vaio Keys: always reports core events
[ 45197.002] (**) Sony Vaio Keys: Device: "/dev/input/event4"
[ 45197.028] (--) Sony Vaio Keys: Found keys
[ 45197.028] (II) Sony Vaio Keys: Configuring as keyboard
[ 45197.028] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[ 45197.029] (**) Option "xkb_rules" "evdev"
[ 45197.029] (**) Option "xkb_model" "evdev"
[ 45197.029] (**) Option "xkb_layout" "us"
[ 45197.074] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 45197.074] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 45197.074] (**) Video Bus: always reports core events
[ 45197.074] (**) Video Bus: Device: "/dev/input/event6"
[ 45197.102] (--) Video Bus: Found keys
[ 45197.102] (II) Video Bus: Configuring as keyboard
[ 45197.102] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 45197.102] (**) Option "xkb_rules" "evdev"
[ 45197.102] (**) Option "xkb_model" "evdev"
[ 45197.102] (**) Option "xkb_layout" "us"
[ 45197.103] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 45197.103] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 45197.103] (**) Power Button: always reports core events
[ 45197.103] (**) Power Button: Device: "/dev/input/event3"
[ 45197.128] (--) Power Button: Found keys
[ 45197.128] (II) Power Button: Configuring as keyboard
[ 45197.128] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 45197.128] (**) Option "xkb_rules" "evdev"
[ 45197.129] (**) Option "xkb_model" "evdev"
[ 45197.129] (**) Option "xkb_layout" "us"
[ 45197.129] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 45197.129] (II) No input driver/identifier specified (ignoring)
[ 45197.131] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event9)
[ 45197.131] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 45197.131] (**) USB 2.0 Camera: always reports core events
[ 45197.131] (**) USB 2.0 Camera: Device: "/dev/input/event9"
[ 45197.155] (--) USB 2.0 Camera: Found keys
[ 45197.155] (II) USB 2.0 Camera: Configuring as keyboard
[ 45197.155] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
[ 45197.155] (**) Option "xkb_rules" "evdev"
[ 45197.155] (**) Option "xkb_model" "evdev"
[ 45197.155] (**) Option "xkb_layout" "us"
[ 45197.156] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 45197.156] (II) No input driver/identifier specified (ignoring)
[ 45197.162] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 45197.162] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 45197.162] (**) AT Translated Set 2 keyboard: always reports core events
[ 45197.162] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 45197.178] (--) AT Translated Set 2 keyboard: Found keys
[ 45197.178] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 45197.178] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 45197.179] (**) Option "xkb_rules" "evdev"
[ 45197.179] (**) Option "xkb_model" "evdev"
[ 45197.179] (**) Option "xkb_layout" "us"
[ 45197.179] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event7)
[ 45197.179] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 45197.179] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "Synaptics Touchpad catch"
[ 45197.179] (II) LoadModule: "synaptics"
[ 45197.179] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 45197.190] (II) Module synaptics: vendor="X.Org Foundation"
[ 45197.190]     compiled for 1.9.0, module version = 1.3.0
[ 45197.190]     Module class: X.Org XInput Driver
[ 45197.190]     ABI class: X.Org XInput driver, version 11.0
[ 45197.190] (II) Synaptics touchpad driver version 1.3.0
[ 45197.190] (**) Option "Device" "/dev/input/event7"
[ 45197.312] (--) ImPS/2 Generic Wheel Mouse: invalid x-axis range.  defaulting to 1615 - 5685
[ 45197.312] (--) ImPS/2 Generic Wheel Mouse: invalid y-axis range.  defaulting to 1729 - 4171
[ 45197.312] (--) ImPS/2 Generic Wheel Mouse: invalid pressure range.  defaulting to 0 - 256
[ 45197.312] (--) ImPS/2 Generic Wheel Mouse: invalid finger width range.  defaulting to 0 - 16
[ 45197.419] (--) ImPS/2 Generic Wheel Mouse: no supported touchpad found
[ 45197.419] (EE) ImPS/2 Generic Wheel Mouse Unable to query/initialize Synaptics hardware.
[ 45197.472] (EE) PreInit failed for input device "ImPS/2 Generic Wheel Mouse"
[ 45197.472] (II) UnloadModule: "synaptics"
[ 45197.472] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 45197.473] (II) No input driver/identifier specified (ignoring)
[ 45197.473] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 45197.473] (II) No input driver/identifier specified (ignoring)
[ 45197.474] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event5)
[ 45197.474] (II) No input driver/identifier specified (ignoring)
[ 45197.474] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse0)
[ 45197.474] (II) No input driver/identifier specified (ignoring)
[ 45197.488] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments

Offline

#18 2010-11-14 18:11:28

Coacher
Guest

Re: [solved] disable touchpad

[ 45197.179] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event7)
[ 45197.179] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 45197.179] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "Synaptics Touchpad catch"
[ 45197.179] (II) LoadModule: "synaptics"
[ 45197.179] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 45197.190] (II) Module synaptics: vendor="X.Org Foundation"
[ 45197.190]     compiled for 1.9.0, module version = 1.3.0
[ 45197.190]     Module class: X.Org XInput Driver
[ 45197.190]     ABI class: X.Org XInput driver, version 11.0
[ 45197.190] (II) Synaptics touchpad driver version 1.3.0
[ 45197.190] (**) Option "Device" "/dev/input/event7"
[ 45197.312] (--) ImPS/2 Generic Wheel Mouse: invalid x-axis range.  defaulting to 1615 - 5685
[ 45197.312] (--) ImPS/2 Generic Wheel Mouse: invalid y-axis range.  defaulting to 1729 - 4171
[ 45197.312] (--) ImPS/2 Generic Wheel Mouse: invalid pressure range.  defaulting to 0 - 256
[ 45197.312] (--) ImPS/2 Generic Wheel Mouse: invalid finger width range.  defaulting to 0 - 16
[ 45197.419] (--) ImPS/2 Generic Wheel Mouse: no supported touchpad found
[ 45197.419] (EE) ImPS/2 Generic Wheel Mouse Unable to query/initialize Synaptics hardware.
[ 45197.472] (EE) PreInit failed for input device "ImPS/2 Generic Wheel Mouse"
[ 45197.472] (II) UnloadModule: "synaptics"

As it is seen upwards now X trying to load synaptics driver for your device, however it fails. Well, you can try to alter a bit that synaptics.conf by removing line with MatchDevicePath, but I'm afraid it will not help. Give it a try anyway, if it doenst help you should wait for newer version of synaptics driver/kernel where this bug will be resolved. A good idea is to search for this issue in Arch bugtracker, xorg-synaptics bugtracker and everywhere else) maybe patch exists. I'll try to find time to do some research myself.

Last edited by Coacher (2010-11-14 18:12:39)

#19 2010-11-14 19:19:34

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

thx coacher

Offline

#20 2010-11-14 19:43:17

Coacher
Guest

Re: [solved] disable touchpad

https://bugs.launchpad.net/ubuntu/+sour … bug/565543
Same bug in ubuntu.
https://bbs.archlinux.org/viewtopic.php?pid=848414
Thread with a similar problem but unsolved yet, however there are some links to similar posts flowing nearby which may be useful.

#21 2010-11-14 19:49:58

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

yep i'm foundind related post but people who doesn't work propertly, mine work, only i want to disable because i don't use any mouse and when i'm typing i press it and all is wrong

many thanks for your attention coacher

Offline

#22 2010-11-14 20:10:05

kismet010
Member
Registered: 2009-09-02
Posts: 137

Re: [solved] disable touchpad

ok, solved, i found with:

xinput set-int-prop "ImPS/2 Generic Wheel Mouse" "Device Enabled" 8 0

i can disable it and changing last 0 with 1 i'll enable it

Offline

Pages: 1

Board footer

Powered by FluxBB