Arch Linux

enito

Member

Registered: 2009-02-17

Posts: 50

Hauppauge WinTV PVR-250 and sound

Hi,

with this news kernel26 or ck, i cant get sound again with the pvr isee is all lodead fine, fw and etc..

ivtv: Start initialization, version 1.4.2
ivtv0: Initializing card 0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ivtv 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
ivtv0: Autodetected Hauppauge WinTV PVR-250
saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
msp3400 1-0040: MSP4448G-B3 found @ 0x80 (ivtv i2c driver #0)
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Initialized card: Hauppauge WinTV PVR-250
ivtv: End initialization
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039

Any tip?

thx!

Firestone

Member

From: Amsterdam

Registered: 2009-07-26

Posts: 20

Re: Hauppauge WinTV PVR-250 and sound

I seem to have to same problem as of my most recent update to 2.6.36.
I am still trying to find what has changed and if there are more reports.

ivtv: Start initialization, version 1.4.2
ivtv0: Initializing card 0
ivtv0: Autodetected Hauppauge card (cx23416 based)
ivtv 0000:02:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
tveeprom 0-0050: Hauppauge model 32054, rev B148, serial# 2766921
tveeprom 0-0050: tuner model is LG TP18PSB11D (idx 48, type 29)
tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 0-0050: audio processor is MSP4418 (idx 25)
tveeprom 0-0050: decoder processor is SAA7115 (idx 19)
tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter
ivtv0: Autodetected Hauppauge WinTV PVR-250
saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
msp3400 0-0040: MSP4418G-A2 found @ 0x80 (ivtv i2c driver #0)
tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0)
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 29 (LG PAL_BG (TPI8PSB11D))
ivtv0: Registered device video1 for encoder MPG (4096 kB)
ivtv0: Registered device video33 for encoder YUV (2048 kB)
ivtv0: Registered device vbi1 for encoder VBI (1024 kB)
ivtv0: Registered device video25 for encoder PCM (320 kB)
ivtv0: Initialized card: Hauppauge WinTV PVR-250
ivtv: End initialization
ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
ivtv0: Encoder revision: 0x02060039

enito

Member

Registered: 2009-02-17

Posts: 50

Re: Hauppauge WinTV PVR-250 and sound

Hi,

http://www.gossamer-threads.com/lists/ivtv/devel/41138

This was the problem, manually you can fix, now how i can patch the kernel, ?  next 2.6.37 kernel come fixed...but still the wait...

greets