You are not logged in.

#1 2011-01-04 06:59:23

tgblb
Member
Registered: 2010-03-22
Posts: 12

Pulseaudio detects the correct sound device only sometimes

I'm running Arch64 with KDE and Pulseaudio, and every time I reboot pulseaudio seems to detect a different device. (Getting the information from pavucontrol)

The correct one is "Analog Surround 5.1 Output + Analog Stereo Input".

But sometimes when I boot up it doesn't detect that one (so I can't select it) and detects "Analog Surround 5.0 Output + Analog Stereo Input", or sometimes it only lets me choose stereo sound.

When it detects the right thing it works great, but problem is it doesn't detect it all the time. I played around with it, and it seems it's more likely to detect the right thing if I stay at the KDE login screen for 10 or so seconds before logging in, so maybe the problem is pulseaudio isn't starting up soon enough?

I've checked the wiki and googled for similar problems but can't seem to find anything.

Anyone have any ideas? Or does anyone know how to make pulseaudio start up sooner?

Thanks.

Offline

#2 2011-01-04 09:58:42

ngoonee
Forum Fellow
From: Between Thailand and Singapore
Registered: 2009-03-17
Posts: 7,274

Re: Pulseaudio detects the correct sound device only sometimes

What happens when you kill pulseaudio and start it again?


Allan-Volunteer on the (topic being discussed) mailn lists. You never get the people who matters attention on the forums.
jasonwryan-Installing Arch is a measure of your literacy. Maintaining Arch is a measure of your diligence. Contributing to Arch is a measure of your competence.
Griemak-Bleeding edge, not bleeding flat. Edge denotes falls will occur from time to time. Bring your own parachute.

Offline

#3 2011-01-05 00:02:23

tgblb
Member
Registered: 2010-03-22
Posts: 12

Re: Pulseaudio detects the correct sound device only sometimes

When I do that it switches to "Dummy Output", and under configuration it says "No cards available for configuration".

Offline

#4 2011-01-05 02:10:49

ngoonee
Forum Fellow
From: Between Thailand and Singapore
Registered: 2009-03-17
Posts: 7,274

Re: Pulseaudio detects the correct sound device only sometimes

I think what's happening is that some app or other is grabbing your sound card, therefore pulseaudio can't get it. Run pulseaudio -vvvvv and paste it here in code blocks


Allan-Volunteer on the (topic being discussed) mailn lists. You never get the people who matters attention on the forums.
jasonwryan-Installing Arch is a measure of your literacy. Maintaining Arch is a measure of your diligence. Contributing to Arch is a measure of your competence.
Griemak-Bleeding edge, not bleeding flat. Edge denotes falls will occur from time to time. Bring your own parachute.

Offline

#5 2011-01-05 05:30:09

tgblb
Member
Registered: 2010-03-22
Posts: 12

Re: Pulseaudio detects the correct sound device only sometimes

Here:

I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
D: core-rtclock.c: Timer slack is set to 50 us.
D: core-util.c: RealtimeKit worked.
I: core-util.c: Successfully gained nice level -11.
I: main.c: This is PulseAudio 0.9.22
D: main.c: Compilation host: x86_64-unknown-linux-gnu
D: main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: main.c: Running on host: Linux x86_64 2.6.36-ARCH #1 SMP PREEMPT Fri Dec 10 20:32:37 CET 2010
D: main.c: Found 4 CPUs.
I: main.c: Page size is 4096 bytes
D: main.c: Compiled with Valgrind support: no
D: main.c: Running in valgrind mode: no
D: main.c: Running in VM: no
D: main.c: Optimized build: yes
D: main.c: All asserts enabled.
I: main.c: Machine ID is 64241363ff22789c833f658a0000017e.
I: main.c: Session ID is 64241363ff22789c833f658a0000017e-1294205012.483143-1205134284.
I: main.c: Using runtime directory /home/joe/.pulse/64241363ff22789c833f658a0000017e-runtime.
I: main.c: Using state directory /home/joe/.pulse.
I: main.c: Using modules directory /usr/lib/pulse-0.9.22/modules.
I: main.c: Running in system mode: no
E: pid.c: Daemon already running.
E: main.c: pa_pid_file_create() failed.

I ran the command when it was working fine btw if that matters. If it does let me know and I'll run it again when it only detects one of the wrong options.

Offline

#6 2011-01-05 05:34:14

ngoonee
Forum Fellow
From: Between Thailand and Singapore
Registered: 2009-03-17
Posts: 7,274

Re: Pulseaudio detects the correct sound device only sometimes

E: pid.c: Daemon already running.

Shouldn't that indicate to you that you're supposed to kill the running daemon first BEFORE trying to run the command?


Allan-Volunteer on the (topic being discussed) mailn lists. You never get the people who matters attention on the forums.
jasonwryan-Installing Arch is a measure of your literacy. Maintaining Arch is a measure of your diligence. Contributing to Arch is a measure of your competence.
Griemak-Bleeding edge, not bleeding flat. Edge denotes falls will occur from time to time. Bring your own parachute.

Offline

#7 2011-01-05 05:45:18

tgblb
Member
Registered: 2010-03-22
Posts: 12

Re: Pulseaudio detects the correct sound device only sometimes

Oh sorry. A little tired is all. tongue

I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
D: core-rtclock.c: Timer slack is set to 50 us.
D: core-util.c: RealtimeKit worked.
I: core-util.c: Successfully gained nice level -11.
I: main.c: This is PulseAudio 0.9.22
D: main.c: Compilation host: x86_64-unknown-linux-gnu
D: main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: main.c: Running on host: Linux x86_64 2.6.36-ARCH #1 SMP PREEMPT Fri Dec 10 20:32:37 CET 2010
D: main.c: Found 4 CPUs.
I: main.c: Page size is 4096 bytes
D: main.c: Compiled with Valgrind support: no
D: main.c: Running in valgrind mode: no
D: main.c: Running in VM: no
D: main.c: Optimized build: yes
D: main.c: All asserts enabled.
I: main.c: Machine ID is 64241363ff22789c833f658a0000017e.
I: main.c: Session ID is 64241363ff22789c833f658a0000017e-1294205012.483143-1205134284.
I: main.c: Using runtime directory /home/joe/.pulse/64241363ff22789c833f658a0000017e-runtime.
I: main.c: Using state directory /home/joe/.pulse.
I: main.c: Using modules directory /usr/lib/pulse-0.9.22/modules.
I: main.c: Running in system mode: no
I: main.c: Fresh high-resolution timers available! Bon appetit!
I: cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 
I: svolume_mmx.c: Initialising MMX optimized functions.
I: remap_mmx.c: Initialising MMX optimized remappers.
I: svolume_sse.c: Initialising SSE2 optimized functions.
I: remap_sse.c: Initialising SSE2 optimized remappers.
I: sconv_sse.c: Initialising SSE2 optimized conversions.
D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
D: database-tdb.c: Opened TDB database '/home/joe/.pulse/64241363ff22789c833f658a0000017e-device-volumes.tdb'
I: module-device-restore.c: Sucessfully opened database file '/home/joe/.pulse/64241363ff22789c833f658a0000017e-device-volumes'.
I: module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: database-tdb.c: Opened TDB database '/home/joe/.pulse/64241363ff22789c833f658a0000017e-stream-volumes.tdb'
I: module-stream-restore.c: Sucessfully opened database file '/home/joe/.pulse/64241363ff22789c833f658a0000017e-stream-volumes'.
I: module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: database-tdb.c: Opened TDB database '/home/joe/.pulse/64241363ff22789c833f658a0000017e-card-database.tdb'
I: module-card-restore.c: Sucessfully opened database file '/home/joe/.pulse/64241363ff22789c833f658a0000017e-card-database'.
I: module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: module.c: Loaded "module-augment-properties" (index: #3; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.22/modules/module-udev-detect.so': success
D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: module-udev-detect.c: /devices/pci0000:00/0000:00:09.0/sound/card0 is busy: no
D: module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_09.0" card_name="alsa_card.pci-0000_00_09.0" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1"'
D: dbus-util.c: Successfully connected to D-Bus session bus 5d1c9544f743b93ededa7ef20000004b as :1.110
D: reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
D: alsa-mixer.c: Looking at profile output:analog-mono
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-mono+input:analog-mono
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-mono+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-mono+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-mono+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-stereo
D: alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:analog-stereo+input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-stereo+input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-40
D: alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround40:0
D: alsa-util.c: Maximum hw buffer size is 170 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-40 supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-40+input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-41
D: alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround41:0
D: alsa-util.c: Maximum hw buffer size is 113 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-41 supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-41+input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-50
D: alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround50:0
D: alsa-util.c: Maximum hw buffer size is 113 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-50 supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-50+input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-51
D: alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: Maximum hw buffer size is 113 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-51 supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-51+input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-71
D: alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround71:0
D: alsa-util.c: Maximum hw buffer size is 85 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-71 supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:analog-surround-71+input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:iec958-stereo supported.
D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:iec958-stereo+input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:analog-mono
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:iec958:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:analog-mono
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:analog-mono
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:analog-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:iec958-stereo
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:iec958-surround-40
D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm.c: Unknown PCM a52:0
I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:hdmi-stereo
D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hdmi:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:hdmi-stereo supported.
D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile output:hdmi-stereo+input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile input:analog-mono
D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open plug:hw:0
D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
D: alsa-mixer.c: Looking at profile input:analog-stereo
D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
D: alsa-mixer.c: Profile input:analog-stereo supported.
D: alsa-mixer.c: Looking at profile input:iec958-stereo
D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
D: alsa-mixer.c: Looking at profile input:iec958-surround-40
D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
I: card.c: Created 0 "alsa_card.pci-0000_00_09.0"
D: reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0'
D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open surround51:0
D: alsa-util.c: Maximum hw buffer size is 113 ms
D: alsa-util.c: Set buffer size first (to 96000 samples), period size second (to 96000 samples).
I: alsa-sink.c: Successfully opened device surround51:0.
I: alsa-sink.c: Selected mapping 'Analog Surround 5.1' (analog-surround-51).
I: alsa-sink.c: Successfully enabled mmap() mode.
I: alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: (alsa-lib)control.c: Invalid CTL surround51:0
I: alsa-mixer.c: Unable to attach to mixer surround51:0: No such file or directory
I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
D: alsa-mixer.c: Probing path 'analog-output'
D: alsa-mixer.c: Probing path 'analog-output-speaker'
D: alsa-mixer.c: Probing path 'analog-output-speaker'
D: alsa-mixer.c: Probe of element 'Desktop Speaker' failed.
D: alsa-mixer.c: Probing path 'analog-output-lfe-on-mono'
D: alsa-mixer.c: Probe of element 'Master Mono' failed.
D: alsa-sink.c: Probed mixer paths:
D: alsa-mixer.c: Path Set 0xee7800, direction=1, probed=yes
D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-144, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Path analog-output-speaker (Analog Speakers), direction=1, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-144, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=0, enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0, override_map=yes
D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Added 2 ports
I: sink.c: Created sink 0 "alsa_output.pci-0000_00_09.0.analog-surround-51" with sample spec s16le 6ch 48000Hz and channel map front-left,front-right,rear-left,rear-right,front-center,lfe
I: sink.c:     alsa.resolution_bits = "16"
I: sink.c:     device.api = "alsa"
I: sink.c:     device.class = "sound"
I: sink.c:     alsa.class = "generic"
I: sink.c:     alsa.subclass = "generic-mix"
I: sink.c:     alsa.name = "ALC1200 Analog"
I: sink.c:     alsa.id = "ALC1200 Analog"
I: sink.c:     alsa.subdevice = "0"
I: sink.c:     alsa.subdevice_name = "subdevice #0"
I: sink.c:     alsa.device = "0"
I: sink.c:     alsa.card = "0"
I: sink.c:     alsa.card_name = "HDA NVidia"
I: sink.c:     alsa.long_card_name = "HDA NVidia at 0xf9e78000 irq 20"
I: sink.c:     alsa.driver_name = "snd_hda_intel"
I: sink.c:     device.bus_path = "pci-0000:00:09.0"
I: sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:09.0/sound/card0"
I: sink.c:     device.bus = "pci"
I: sink.c:     device.vendor.id = "10de"
I: sink.c:     device.vendor.name = "nVidia Corporation"
I: sink.c:     device.product.id = "07fc"
I: sink.c:     device.product.name = "MCP73 High Definition Audio"
I: sink.c:     device.form_factor = "internal"
I: sink.c:     device.string = "surround51:0"
I: sink.c:     device.buffering.buffer_size = "65280"
I: sink.c:     device.buffering.fragment_size = "32640"
I: sink.c:     device.access_mode = "mmap+timer"
I: sink.c:     device.profile.name = "analog-surround-51"
I: sink.c:     device.profile.description = "Analog Surround 5.1"
I: sink.c:     device.description = "Internal Audio Analog Surround 5.1"
I: sink.c:     alsa.mixer_name = "Nvidia MCP73 HDMI"
I: sink.c:     alsa.components = "HDA:10ec0888,10250137,00100101 HDA:10de8001,10de0101,00100000"
I: sink.c:     module-udev-detect.discovered = "1"
I: sink.c:     device.icon_name = "audio-card-pci"
D: core-subscribe.c: Dropped redundant event due to change event.
I: source.c: Created source 0 "alsa_output.pci-0000_00_09.0.analog-surround-51.monitor" with sample spec s16le 6ch 48000Hz and channel map front-left,front-right,rear-left,rear-right,front-center,lfe
I: source.c:     device.description = "Monitor of Internal Audio Analog Surround 5.1"
I: source.c:     device.class = "monitor"
I: source.c:     alsa.card = "0"
I: source.c:     alsa.card_name = "HDA NVidia"
I: source.c:     alsa.long_card_name = "HDA NVidia at 0xf9e78000 irq 20"
I: source.c:     alsa.driver_name = "snd_hda_intel"
I: source.c:     device.bus_path = "pci-0000:00:09.0"
I: source.c:     sysfs.path = "/devices/pci0000:00/0000:00:09.0/sound/card0"
I: source.c:     device.bus = "pci"
I: source.c:     device.vendor.id = "10de"
I: source.c:     device.vendor.name = "nVidia Corporation"
I: source.c:     device.product.id = "07fc"
I: source.c:     device.product.name = "MCP73 High Definition Audio"
I: source.c:     device.form_factor = "internal"
I: source.c:     device.string = "0"
I: source.c:     module-udev-detect.discovered = "1"
I: source.c:     device.icon_name = "audio-card-pci"
I: alsa-sink.c: Using 2.0 fragments of size 32640 bytes (56.67ms), buffer size is 65280 bytes (113.33ms)
I: alsa-sink.c: Time scheduling watermark is 20.00ms
D: alsa-sink.c: hwbuf_unused=0
D: alsa-sink.c: setting avail_min=4480
D: alsa-mixer.c: Activating path analog-output-speaker
D: alsa-mixer.c: Path analog-output-speaker (Analog Speakers), direction=1, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-144, max_dB=0
D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=0, enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0, override_map=yes
D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
I: alsa-sink.c: Hardware volume ranges from -144.00 dB to 0.00 dB.
I: alsa-sink.c: No particular base volume set, fixing to 0 dB
I: alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
I: alsa-sink.c: Using hardware mute control.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Soft volume PCM
D: alsa-util.c: Control: PCM Playback Volume
D: alsa-util.c: min_dB: -51
D: alsa-util.c: max_dB: 0
D: alsa-util.c: resolution: 256
D: alsa-util.c: Its setup is:
D: alsa-util.c:   stream       : PLAYBACK
D: alsa-util.c:   access       : MMAP_INTERLEAVED
D: alsa-util.c:   format       : S16_LE
D: alsa-util.c:   subformat    : STD
D: alsa-util.c:   channels     : 6
D: alsa-util.c:   rate         : 48000
D: alsa-util.c:   exact rate   : 48000 (48000/1)
D: alsa-util.c:   msbits       : 16
D: alsa-util.c:   buffer_size  : 5440
D: alsa-util.c:   period_size  : 2720
D: alsa-util.c:   period_time  : 56666
D: alsa-util.c:   tstamp_mode  : ENABLE
D: alsa-util.c:   period_step  : 1
D: alsa-util.c:   avail_min    : 4480
D: alsa-util.c:   period_event : 0
D: alsa-util.c:   start_threshold  : -1
D: alsa-util.c:   stop_threshold   : 6124895493223874560
D: alsa-util.c:   silence_threshold: 0
D: alsa-util.c:   silence_size : 0
D: alsa-util.c:   boundary     : 6124895493223874560
D: alsa-util.c: Slave: Hardware PCM card 0 'HDA NVidia' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c:   stream       : PLAYBACK
D: alsa-util.c:   access       : MMAP_INTERLEAVED
D: alsa-util.c:   format       : S16_LE
D: alsa-util.c:   subformat    : STD
D: alsa-util.c:   channels     : 6
D: alsa-util.c:   rate         : 48000
D: alsa-util.c:   exact rate   : 48000 (48000/1)
D: alsa-util.c:   msbits       : 16
D: alsa-util.c:   buffer_size  : 5440
D: alsa-util.c:   period_size  : 2720
D: alsa-util.c:   period_time  : 56666
D: alsa-util.c:   tstamp_mode  : ENABLE
D: alsa-util.c:   period_step  : 1
D: alsa-util.c:   avail_min    : 4480
D: alsa-util.c:   period_event : 0
D: alsa-util.c:   start_threshold  : -1
D: alsa-util.c:   stop_threshold   : 6124895493223874560
D: alsa-util.c:   silence_threshold: 0
D: alsa-util.c:   silence_size : 0
D: alsa-util.c:   boundary     : 6124895493223874560
D: alsa-util.c:   appl_ptr     : 0
D: alsa-util.c:   hw_ptr       : 0
D: alsa-sink.c: Read hardware volume: 0:  20% 1:  20% 2:  20% 3:  20% 4:  20% 5:  20%
D: alsa-sink.c: Thread starting up
D: core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: alsa-sink.c: Starting playback.
D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: alsa-util.c: Managed to open front:0
D: alsa-util.c: Maximum hw buffer size is 341 ms
D: alsa-util.c: Set buffer size first (to 96000 samples), period size second (to 96000 samples).
I: alsa-source.c: Successfully opened device front:0.
I: alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
I: alsa-source.c: Successfully enabled mmap() mode.
I: alsa-source.c: Successfully enabled timer-based scheduling mode.
I: (alsa-lib)control.c: Invalid CTL front:0
I: alsa-mixer.c: Unable to attach to mixer front:0: No such file or directory
I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
D: alsa-mixer.c: Probing path 'analog-input'
D: alsa-mixer.c: Probing path 'analog-input-microphone'
D: alsa-mixer.c: Probe of element 'Mic' failed.
D: alsa-mixer.c: Probing path 'analog-input-linein'
D: alsa-mixer.c: Probe of element 'Line' failed.
D: alsa-mixer.c: Probing path 'analog-input'
D: alsa-mixer.c: Probe of element 'Aux' failed.
D: alsa-mixer.c: Probing path 'analog-input-video'
D: alsa-mixer.c: Probe of element 'Video' failed.
D: alsa-mixer.c: Probing path 'analog-input-video'
D: alsa-mixer.c: Probe of element 'TV Tuner' failed.
D: alsa-mixer.c: Probing path 'analog-input-radio'
D: alsa-mixer.c: Probe of element 'FM' failed.
D: alsa-mixer.c: Probing path 'analog-input'
D: alsa-mixer.c: Probe of element 'Mic/Line' failed.
D: alsa-source.c: Probed mixer paths:
D: alsa-mixer.c: Path Set 0x7f4604004330, direction=2, probed=yes
D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=30
D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x403f600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Option Mic (input-microphone-1/Microphone 1) index=0, priority=20
D: alsa-mixer.c: Option Front Mic (input-microphone-2/Microphone 2) index=1, priority=19
D: alsa-mixer.c: Option Line (input-linein/Line-In) index=2, priority=18
D: alsa-mixer.c: Setting input-microphone-1 (Microphone 1) priority=20
D: alsa-mixer.c: Setting input-microphone-2 (Microphone 2) priority=19
D: alsa-mixer.c: Setting input-linein (Line-In) priority=18
D: alsa-mixer.c: Added 3 ports
D: core-subscribe.c: Dropped redundant event due to change event.
I: source.c: Created source 1 "alsa_input.pci-0000_00_09.0.analog-stereo" with sample spec s16le 2ch 48000Hz and channel map front-left,front-right
I: source.c:     alsa.resolution_bits = "16"
I: source.c:     device.api = "alsa"
I: source.c:     device.class = "sound"
I: source.c:     alsa.class = "generic"
I: source.c:     alsa.subclass = "generic-mix"
I: source.c:     alsa.name = "ALC1200 Analog"
I: source.c:     alsa.id = "ALC1200 Analog"
I: source.c:     alsa.subdevice = "0"
I: source.c:     alsa.subdevice_name = "subdevice #0"
I: source.c:     alsa.device = "0"
I: source.c:     alsa.card = "0"
I: source.c:     alsa.card_name = "HDA NVidia"
I: source.c:     alsa.long_card_name = "HDA NVidia at 0xf9e78000 irq 20"
I: source.c:     alsa.driver_name = "snd_hda_intel"
I: source.c:     device.bus_path = "pci-0000:00:09.0"
I: source.c:     sysfs.path = "/devices/pci0000:00/0000:00:09.0/sound/card0"
I: source.c:     device.bus = "pci"
I: source.c:     device.vendor.id = "10de"
I: source.c:     device.vendor.name = "nVidia Corporation"
I: source.c:     device.product.id = "07fc"
I: source.c:     device.product.name = "MCP73 High Definition Audio"
I: source.c:     device.form_factor = "internal"
I: source.c:     device.string = "front:0"
I: source.c:     device.buffering.buffer_size = "65536"
I: source.c:     device.buffering.fragment_size = "32768"
I: source.c:     device.access_mode = "mmap+timer"
I: source.c:     device.profile.name = "analog-stereo"
I: source.c:     device.profile.description = "Analog Stereo"
I: source.c:     device.description = "Internal Audio Analog Stereo"
I: source.c:     alsa.mixer_name = "Nvidia MCP73 HDMI"
I: source.c:     alsa.components = "HDA:10ec0888,10250137,00100101 HDA:10de8001,10de0101,00100000"
I: source.c:     module-udev-detect.discovered = "1"
I: source.c:     device.icon_name = "audio-card-pci"
I: alsa-source.c: Using 2.0 fragments of size 32768 bytes (170.67ms), buffer size is 65536 bytes (341.33ms)
I: alsa-source.c: Time scheduling watermark is 20.00ms
D: alsa-source.c: hwbuf_unused=0
D: alsa-source.c: setting avail_min=15424
D: alsa-mixer.c: Activating path analog-input
D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=30
D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x403f600000000f66, n_channels=2, override_map=yes
D: alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
D: alsa-mixer.c: Option Mic (input-microphone-1/Microphone 1) index=0, priority=20
D: alsa-mixer.c: Option Front Mic (input-microphone-2/Microphone 2) index=1, priority=19
D: alsa-mixer.c: Option Line (input-linein/Line-In) index=2, priority=18
D: alsa-mixer.c: Setting input-microphone-1 (Microphone 1) priority=20
D: alsa-mixer.c: Setting input-microphone-2 (Microphone 2) priority=19
D: alsa-mixer.c: Setting input-linein (Line-In) priority=18
I: alsa-source.c: Hardware volume ranges from -16.50 dB to 30.00 dB.
I: alsa-source.c: Fixing base volume to -30.00 dB
I: alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: alsa-source.c: Using hardware mute control.
D: alsa-util.c: snd_pcm_dump():
D: alsa-util.c: Soft volume PCM
D: alsa-util.c: Control: PCM Playback Volume
D: alsa-util.c: min_dB: -51
D: alsa-util.c: max_dB: 0
D: alsa-util.c: resolution: 256
D: alsa-util.c: Its setup is:
D: alsa-util.c:   stream       : CAPTURE
D: alsa-util.c:   access       : MMAP_INTERLEAVED
D: alsa-util.c:   format       : S16_LE
D: alsa-util.c:   subformat    : STD
D: alsa-util.c:   channels     : 2
D: alsa-util.c:   rate         : 48000
D: alsa-util.c:   exact rate   : 48000 (48000/1)
D: alsa-util.c:   msbits       : 16
D: alsa-util.c:   buffer_size  : 16384
D: alsa-util.c:   period_size  : 8192
D: alsa-util.c:   period_time  : 170666
D: alsa-util.c:   tstamp_mode  : ENABLE
D: alsa-util.c:   period_step  : 1
D: alsa-util.c:   avail_min    : 15424
D: alsa-util.c:   period_event : 0
D: alsa-util.c:   start_threshold  : -1
D: alsa-util.c:   stop_threshold   : 4611686018427387904
D: alsa-util.c:   silence_threshold: 0
D: alsa-util.c:   silence_size : 0
D: alsa-util.c:   boundary     : 4611686018427387904
D: alsa-util.c: Slave: Hardware PCM card 0 'HDA NVidia' device 0 subdevice 0
D: alsa-util.c: Its setup is:
D: alsa-util.c:   stream       : CAPTURE
D: alsa-util.c:   access       : MMAP_INTERLEAVED
D: alsa-util.c:   format       : S16_LE
D: alsa-util.c:   subformat    : STD
D: alsa-util.c:   channels     : 2
D: alsa-util.c:   rate         : 48000
D: alsa-util.c:   exact rate   : 48000 (48000/1)
D: alsa-util.c:   msbits       : 16
D: alsa-util.c:   buffer_size  : 16384
D: alsa-util.c:   period_size  : 8192
D: alsa-util.c:   period_time  : 170666
D: alsa-util.c:   tstamp_mode  : ENABLE
D: alsa-util.c:   period_step  : 1
D: alsa-util.c:   avail_min    : 15424
D: alsa-util.c:   period_event : 0
D: alsa-util.c:   start_threshold  : -1
D: alsa-util.c:   stop_threshold   : 4611686018427387904
D: alsa-util.c:   silence_threshold: 0
D: alsa-util.c:   silence_size : 0
D: alsa-util.c:   boundary     : 4611686018427387904
D: alsa-util.c:   appl_ptr     : 0
D: alsa-util.c:   hw_ptr       : 0
D: alsa-source.c: Read hardware volume: 0:  27% 1:  27%
D: alsa-source.c: Thread starting up
D: core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: alsa-source.c: Starting capture.
I: module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="0" name="pci-0000_00_09.0" card_name="alsa_card.pci-0000_00_09.0" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1"").
I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:09.0/sound/card0 (alsa_card.pci-0000_00_09.0) module loaded.
I: module-udev-detect.c: Found 1 cards.
I: module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.22/modules/module-bluetooth-discover.so': success
D: dbus-util.c: Successfully connected to D-Bus system bus 388ec2ad109f18dc6cb6313a00000021 as :1.108
D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
D: bluetooth-util.c: Bluetooth daemon is apparently not available.
I: module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.22/modules/module-esound-protocol-unix.so': success
E: socket-server.c: bind(): Address already in use
E: module.c: Failed to load  module "module-esound-protocol-unix" (argument: ""): initialization failed.
E: main.c: Module load failed.
E: main.c: Failed to initialize daemon.
I: module.c: Unloading "module-device-restore" (index: #0).
I: module.c: Unloaded "module-device-restore" (index: #0).
D: core-subscribe.c: Dropped redundant event due to remove event.
I: module.c: Unloading "module-stream-restore" (index: #1).
I: module.c: Unloaded "module-stream-restore" (index: #1).
D: core-subscribe.c: Dropped redundant event due to remove event.
I: module.c: Unloading "module-card-restore" (index: #2).
I: module.c: Unloaded "module-card-restore" (index: #2).
D: core-subscribe.c: Dropped redundant event due to remove event.
I: module.c: Unloading "module-augment-properties" (index: #3).
I: module.c: Unloaded "module-augment-properties" (index: #3).
D: core-subscribe.c: Dropped redundant event due to remove event.
I: module.c: Unloading "module-alsa-card" (index: #4).
D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: core-subscribe.c: Dropped redundant event due to remove event.
D: core-subscribe.c: Dropped redundant event due to remove event.
D: core-subscribe.c: Dropped redundant event due to remove event.
D: core-subscribe.c: Dropped redundant event due to remove event.
D: alsa-sink.c: Thread shutting down
I: sink.c: Freeing sink 0 "alsa_output.pci-0000_00_09.0.analog-surround-51"
I: source.c: Freeing source 0 "alsa_output.pci-0000_00_09.0.analog-surround-51.monitor"
D: core-subscribe.c: Dropped redundant event due to remove event.
D: core-subscribe.c: Dropped redundant event due to remove event.
D: alsa-source.c: Thread shutting down
I: source.c: Freeing source 1 "alsa_input.pci-0000_00_09.0.analog-stereo"
I: card.c: Freed 0 "alsa_card.pci-0000_00_09.0"
D: core-subscribe.c: Dropped redundant event due to remove event.
I: module.c: Unloaded "module-alsa-card" (index: #4).
D: core-subscribe.c: Dropped redundant event due to remove event.
I: module.c: Unloading "module-udev-detect" (index: #5).
I: module.c: Unloaded "module-udev-detect" (index: #5).
D: core-subscribe.c: Dropped redundant event due to remove event.
I: module.c: Unloading "module-bluetooth-discover" (index: #6).
I: module.c: Unloaded "module-bluetooth-discover" (index: #6).
D: core-subscribe.c: Dropped redundant event due to remove event.
I: main.c: Daemon terminated.

Offline

#8 2011-01-05 08:09:40

ngoonee
Forum Fellow
From: Between Thailand and Singapore
Registered: 2009-03-17
Posts: 7,274

Re: Pulseaudio detects the correct sound device only sometimes

Looks fine to me...


Allan-Volunteer on the (topic being discussed) mailn lists. You never get the people who matters attention on the forums.
jasonwryan-Installing Arch is a measure of your literacy. Maintaining Arch is a measure of your diligence. Contributing to Arch is a measure of your competence.
Griemak-Bleeding edge, not bleeding flat. Edge denotes falls will occur from time to time. Bring your own parachute.

Offline

#9 2011-01-06 01:23:53

tgblb
Member
Registered: 2010-03-22
Posts: 12

Re: Pulseaudio detects the correct sound device only sometimes

So, any other ideas?

Offline

#10 2011-01-06 05:57:16

ngoonee
Forum Fellow
From: Between Thailand and Singapore
Registered: 2009-03-17
Posts: 7,274

Re: Pulseaudio detects the correct sound device only sometimes

Yes, contact the pulseaudio mailing list with the information here as well as your configurations in /etc/pulse/*


Allan-Volunteer on the (topic being discussed) mailn lists. You never get the people who matters attention on the forums.
jasonwryan-Installing Arch is a measure of your literacy. Maintaining Arch is a measure of your diligence. Contributing to Arch is a measure of your competence.
Griemak-Bleeding edge, not bleeding flat. Edge denotes falls will occur from time to time. Bring your own parachute.

Offline

#11 2011-04-25 20:22:00

clovenhoof
Member
From: Bulgaria
Registered: 2010-09-16
Posts: 82

Re: Pulseaudio detects the correct sound device only sometimes

I have the same problem. The only difference is that pulseaudio detects no sound device (only "dummy output").
Reproducing of the problem is the same.
Is there any solution, already?

Last edited by clovenhoof (2011-04-25 20:25:04)

Offline

Board footer

Powered by FluxBB