You are not logged in.

#1 2011-01-31 08:47:48

vmario
Member
Registered: 2011-01-31
Posts: 2

A few seconds after start the GDM mouse stops working

After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.

Edited: Mouse works. Only pointer does not move.

lscpi says:

00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)

gdm says:

usb 2-2: new low speed USB device using uhci_hcd and address 4
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0

(...)

[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)

(this line is repeated several times:)
[drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling

(...)

[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
[drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
[drm:i915_reset] *ERROR* Failed to reset chip.

/var/log/Xorg.0.log says:

[    23.129] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    23.129] 
X.Org X Server 1.9.3.901 (1.9.4 RC 1)
Release Date: 2011-01-07
[    23.129] X Protocol Version 11, Revision 0
[    23.129] Build Operating System: Linux 2.6.36-ARCH i686 
[    23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
[    23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
[    23.129] Build Date: 08 January 2011  11:27:31PM
[    23.129]  
[    23.130] Current version of pixman: 0.20.2
[    23.130]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    23.130] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
[    23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    23.206] (==) No Layout section.  Using the first Screen section.
[    23.206] (==) No screen section available. Using defaults.
[    23.206] (**) |-->Screen "Default Screen Section" (0)
[    23.206] (**) |   |-->Monitor "<default monitor>"
[    23.206] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    23.206] (==) Automatically adding devices
[    23.206] (==) Automatically enabling devices
[    23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    23.260]     Entry deleted from font path.
[    23.295] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[    23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.295] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.295] (II) Loader magic: 0x81f3160
[    23.295] (II) Module ABI versions:
[    23.295]     X.Org ANSI C Emulation: 0.4
[    23.295]     X.Org Video Driver: 8.0
[    23.295]     X.Org XInput driver : 11.0
[    23.295]     X.Org Server Extension : 4.0
[    23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
[    23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    23.296] (II) LoadModule: "extmod"
[    23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    23.314] (II) Module extmod: vendor="X.Org Foundation"
[    23.314]     compiled for 1.9.3.901, module version = 1.0.0
[    23.314]     Module class: X.Org Server Extension
[    23.314]     ABI class: X.Org Server Extension, version 4.0
[    23.314] (II) Loading extension MIT-SCREEN-SAVER
[    23.314] (II) Loading extension XFree86-VidModeExtension
[    23.314] (II) Loading extension XFree86-DGA
[    23.314] (II) Loading extension DPMS
[    23.314] (II) Loading extension XVideo
[    23.314] (II) Loading extension XVideo-MotionCompensation
[    23.314] (II) Loading extension X-Resource
[    23.314] (II) LoadModule: "dbe"
[    23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    23.320] (II) Module dbe: vendor="X.Org Foundation"
[    23.320]     compiled for 1.9.3.901, module version = 1.0.0
[    23.320]     Module class: X.Org Server Extension
[    23.320]     ABI class: X.Org Server Extension, version 4.0
[    23.320] (II) Loading extension DOUBLE-BUFFER
[    23.320] (II) LoadModule: "glx"
[    23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.337] (II) Module glx: vendor="X.Org Foundation"
[    23.337]     compiled for 1.9.3.901, module version = 1.0.0
[    23.337]     ABI class: X.Org Server Extension, version 4.0
[    23.337] (==) AIGLX enabled
[    23.337] (II) Loading extension GLX
[    23.337] (II) LoadModule: "record"
[    23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    23.338] (II) Module record: vendor="X.Org Foundation"
[    23.338]     compiled for 1.9.3.901, module version = 1.13.0
[    23.338]     Module class: X.Org Server Extension
[    23.338]     ABI class: X.Org Server Extension, version 4.0
[    23.339] (II) Loading extension RECORD
[    23.339] (II) LoadModule: "dri"
[    23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    23.347] (II) Module dri: vendor="X.Org Foundation"
[    23.347]     compiled for 1.9.3.901, module version = 1.0.0
[    23.347]     ABI class: X.Org Server Extension, version 4.0
[    23.347] (II) Loading extension XFree86-DRI
[    23.347] (II) LoadModule: "dri2"
[    23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    23.351] (II) Module dri2: vendor="X.Org Foundation"
[    23.351]     compiled for 1.9.3.901, module version = 1.2.0
[    23.351]     ABI class: X.Org Server Extension, version 4.0
[    23.351] (II) Loading extension DRI2
[    23.351] (==) Matched intel as autoconfigured driver 0
[    23.351] (==) Matched vesa as autoconfigured driver 1
[    23.351] (==) Matched fbdev as autoconfigured driver 2
[    23.351] (==) Assigned the driver to the xf86ConfigLayout
[    23.351] (II) LoadModule: "intel"
[    23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.408] (II) Module intel: vendor="X.Org Foundation"
[    23.408]     compiled for 1.9.3, module version = 2.14.0
[    23.408]     Module class: X.Org Video Driver
[    23.408]     ABI class: X.Org Video Driver, version 8.0
[    23.408] (II) LoadModule: "vesa"
[    23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.414] (II) Module vesa: vendor="X.Org Foundation"
[    23.414]     compiled for 1.9.0, module version = 2.3.0
[    23.414]     Module class: X.Org Video Driver
[    23.414]     ABI class: X.Org Video Driver, version 8.0
[    23.414] (II) LoadModule: "fbdev"
[    23.425] (WW) Warning, couldn't open module fbdev
[    23.425] (II) UnloadModule: "fbdev"
[    23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
[    23.426] (II) VESA: driver for VESA chipsets: vesa
[    23.426] (++) using VT number 7

[    23.435] (WW) Falling back to old probe method for vesa
[    23.435] drmOpenDevice: node name is /dev/dri/card0
[    23.435] drmOpenDevice: open result is 8, (OK)
[    23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    23.435] drmOpenDevice: node name is /dev/dri/card0
[    23.435] drmOpenDevice: open result is 8, (OK)
[    23.435] drmOpenByBusid: drmOpenMinor returns 8
[    23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    23.435] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.435] (==) intel(0): RGB weight 888
[    23.435] (==) intel(0): Default visual is TrueColor
[    23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
[    23.436] (--) intel(0): Chipset: "946GZ"
[    23.436] (**) intel(0): Tiling enabled
[    23.436] (**) intel(0): SwapBuffers wait enabled
[    23.436] (==) intel(0): video overlay key set to 0x101fe
[    23.520] (II) intel(0): Output VGA1 has no monitor section
[    23.587] (II) intel(0): EDID for output VGA1
[    23.587] (II) intel(0): Manufacturer: SAM  Model: 594  Serial#: 1297691186
[    23.587] (II) intel(0): Year: 2010  Week: 1
[    23.587] (II) intel(0): EDID Version: 1.3
[    23.587] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    23.587] (II) intel(0): Sync:  Separate  Composite  SyncOnGreen
[    23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44  vert.: 30
[    23.587] (II) intel(0): Gamma: 2.20
[    23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[    23.587] (II) intel(0): First detailed timing is preferred mode
[    23.587] (II) intel(0): redX: 0.646 redY: 0.339   greenX: 0.290 greenY: 0.603
[    23.587] (II) intel(0): blueX: 0.145 blueY: 0.070   whiteX: 0.312 whiteY: 0.329
[    23.587] (II) intel(0): Supported established timings:
[    23.587] (II) intel(0): 720x400@70Hz
[    23.587] (II) intel(0): 640x480@60Hz
[    23.587] (II) intel(0): 640x480@67Hz
[    23.587] (II) intel(0): 640x480@72Hz
[    23.587] (II) intel(0): 640x480@75Hz
[    23.587] (II) intel(0): 800x600@56Hz
[    23.587] (II) intel(0): 800x600@60Hz
[    23.587] (II) intel(0): 800x600@72Hz
[    23.587] (II) intel(0): 800x600@75Hz
[    23.587] (II) intel(0): 832x624@75Hz
[    23.587] (II) intel(0): 1024x768@60Hz
[    23.587] (II) intel(0): 1024x768@70Hz
[    23.587] (II) intel(0): 1024x768@75Hz
[    23.587] (II) intel(0): 1280x1024@75Hz
[    23.587] (II) intel(0): 1152x864@75Hz
[    23.587] (II) intel(0): Manufacturer's mask: 0
[    23.587] (II) intel(0): Supported standard timings:
[    23.587] (II) intel(0): #0: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    23.587] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    23.587] (II) intel(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    23.587] (II) intel(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    23.587] (II) intel(0): #4: hsize: 1280  vsize 800  refresh: 60  vid: 129
[    23.587] (II) intel(0): #5: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    23.587] (II) intel(0): #6: hsize: 1440  vsize 900  refresh: 75  vid: 3989
[    23.588] (II) intel(0): Supported detailed timing:
[    23.588] (II) intel(0): clock: 119.0 MHz   Image Size:  459 x 296 mm
[    23.588] (II) intel(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[    23.588] (II) intel(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
[    23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[    23.588] (II) intel(0): Monitor name: SyncMaster
[    23.588] (II) intel(0): Serial No: HMFZ102588
[    23.588] (II) intel(0): EDID (in hex):
[    23.588] (II) intel(0):     00ffffffffffff004c2d94053232594d
[    23.588] (II) intel(0):     011401030e2c1e782ab501a5564a9a25
[    23.588] (II) intel(0):     125054bfef80b30081808140714f8100
[    23.588] (II) intel(0):     9500950f01017c2e90a0601a1e403020
[    23.588] (II) intel(0):     3600cb281100001a000000fd00384b1e
[    23.588] (II) intel(0):     510e000a202020202020000000fc0053
[    23.588] (II) intel(0):     796e634d61737465720a2020000000ff
[    23.588] (II) intel(0):     00484d465a3130323538380a20200026
[    23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
[    23.613] (II) intel(0): Using EDID range info for horizontal sync
[    23.613] (II) intel(0): Using EDID range info for vertical refresh
[    23.613] (II) intel(0): Printing DDC gathered Modelines:
[    23.613] (II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    23.613] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    23.613] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    23.613] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    23.613] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    23.613] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    23.613] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    23.613] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    23.613] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    23.613] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    23.613] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    23.613] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    23.613] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    23.613] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    23.613] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    23.613] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    23.613] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    23.613] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    23.613] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    23.613] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    23.613] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    23.613] (II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
[    23.614] (II) intel(0): Printing probed modes for output VGA1
[    23.614] (II) intel(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    23.614] (II) intel(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    23.614] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    23.614] (II) intel(0): Modeline "1440x900"x75.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
[    23.614] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    23.614] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    23.614] (II) intel(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 +hsync -vsync (49.7 kHz)
[    23.614] (II) intel(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    23.614] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[    23.614] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    23.614] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    23.614] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    23.614] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    23.614] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    23.614] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    23.614] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    23.614] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[    23.614] (II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    23.614] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    23.614] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    23.614] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    23.614] (II) intel(0): Output VGA1 connected
[    23.614] (II) intel(0): Using exact sizes for initial modes
[    23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
[    23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    23.614] (II) intel(0): Kernel page flipping support detected, enabling
[    23.614] (**) intel(0): Display dimensions: (440, 300) mm
[    23.614] (**) intel(0): DPI set to (96, 88)
[    23.614] (II) Loading sub module "fb"
[    23.614] (II) LoadModule: "fb"
[    23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
[    23.628] (II) Module fb: vendor="X.Org Foundation"
[    23.629]     compiled for 1.9.3.901, module version = 1.0.0
[    23.629]     ABI class: X.Org ANSI C Emulation, version 0.4
[    23.629] (II) UnloadModule: "vesa"
[    23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.629] (==) Depth 24 pixmap format is 32 bpp
[    23.629] (==) intel(0): VideoRam: 262144 KB
[    23.629] (II) intel(0): [DRI2] Setup complete
[    23.629] (II) intel(0): [DRI2]   DRI driver: i915
[    23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[    23.656] (II) UXA(0): Driver registered support for the following operations:
[    23.656] (II)         solid
[    23.656] (II)         copy
[    23.656] (II)         composite (RENDER acceleration)
[    23.656] (II)         put_image
[    23.656] (II)         get_image
[    23.656] (==) intel(0): Backing store disabled
[    23.656] (==) intel(0): Silken mouse enabled
[    23.658] (II) intel(0): Initializing HW Cursor
[    23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    23.673] (==) intel(0): DPMS enabled
[    23.673] (==) intel(0): Intel XvMC decoder disabled
[    23.673] (II) intel(0): Set up textured video
[    23.673] (II) intel(0): Set up overlay video
[    23.673] (II) intel(0): direct rendering: DRI2 Enabled
[    23.673] (==) intel(0): hotplug detection: "enabled"
[    23.674] (--) RandR disabled
[    23.674] (II) Initializing built-in extension Generic Event Extension
[    23.674] (II) Initializing built-in extension SHAPE
[    23.674] (II) Initializing built-in extension MIT-SHM
[    23.674] (II) Initializing built-in extension XInputExtension
[    23.674] (II) Initializing built-in extension XTEST
[    23.674] (II) Initializing built-in extension BIG-REQUESTS
[    23.674] (II) Initializing built-in extension SYNC
[    23.674] (II) Initializing built-in extension XKEYBOARD
[    23.674] (II) Initializing built-in extension XC-MISC
[    23.674] (II) Initializing built-in extension SECURITY
[    23.674] (II) Initializing built-in extension XINERAMA
[    23.674] (II) Initializing built-in extension XFIXES
[    23.674] (II) Initializing built-in extension RENDER
[    23.674] (II) Initializing built-in extension RANDR
[    23.674] (II) Initializing built-in extension COMPOSITE
[    23.674] (II) Initializing built-in extension DAMAGE
[    23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
[    23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
[    23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[    23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.755] (II) intel(0): Setting screen physical size to 444 x 277
[    24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.316] (II) LoadModule: "evdev"
[    24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.334] (II) Module evdev: vendor="X.Org Foundation"
[    24.334]     compiled for 1.9.0, module version = 2.5.0
[    24.334]     Module class: X.Org XInput Driver
[    24.334]     ABI class: X.Org XInput driver, version 11.0
[    24.334] (**) Power Button: always reports core events
[    24.334] (**) Power Button: Device: "/dev/input/event1"
[    24.340] (--) Power Button: Found keys
[    24.340] (II) Power Button: Configuring as keyboard
[    24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    24.340] (**) Option "xkb_rules" "evdev"
[    24.340] (**) Option "xkb_model" "evdev"
[    24.340] (**) Option "xkb_layout" "us"
[    24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.380] (**) Power Button: always reports core events
[    24.380] (**) Power Button: Device: "/dev/input/event0"
[    24.386] (--) Power Button: Found keys
[    24.386] (II) Power Button: Configuring as keyboard
[    24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    24.386] (**) Option "xkb_rules" "evdev"
[    24.386] (**) Option "xkb_model" "evdev"
[    24.386] (**) Option "xkb_layout" "us"
[    24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[    24.394] (II) No input driver/identifier specified (ignoring)
[    24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
[    24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
[    24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
[    24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
[    24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
[    24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
[    24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
[    24.403] (**) Option "xkb_rules" "evdev"
[    24.403] (**) Option "xkb_model" "evdev"
[    24.403] (**) Option "xkb_layout" "us"
[    24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[    24.411] (II) No input driver/identifier specified (ignoring)
[    27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
[    27.182] (II) intel(0): Using hsync ranges from config file
[    27.182] (II) intel(0): Using vrefresh ranges from config file
[    27.182] (II) intel(0): Printing DDC gathered Modelines:
[    27.182] (II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    27.182] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    27.182] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    27.182] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    27.182] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    27.182] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    27.182] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    27.182] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    27.182] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    27.182] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    27.182] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    27.182] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    27.182] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    27.182] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    27.182] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    27.182] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    27.182] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    27.182] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    27.182] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    27.182] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    27.182] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    27.182] (II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
[    27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
[    27.256] (II) intel(0): Using hsync ranges from config file
[    27.256] (II) intel(0): Using vrefresh ranges from config file
[    27.256] (II) intel(0): Printing DDC gathered Modelines:
[    27.256] (II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    27.256] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    27.256] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    27.256] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    27.256] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    27.256] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    27.256] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    27.256] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    27.256] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    27.256] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    27.256] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    27.256] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    27.256] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    27.256] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    27.256] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    27.256] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    27.256] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    27.256] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    27.256] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    27.256] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    27.256] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    27.256] (II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
[    27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
[    27.363] (II) intel(0): Using hsync ranges from config file
[    27.364] (II) intel(0): Using vrefresh ranges from config file
[    27.364] (II) intel(0): Printing DDC gathered Modelines:
[    27.364] (II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    27.364] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    27.364] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    27.364] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    27.364] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    27.364] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    27.364] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    27.364] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    27.364] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    27.364] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    27.364] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    27.364] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    27.364] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    27.364] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    27.364] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    27.364] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    27.364] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    27.364] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    27.364] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    27.364] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    27.364] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    27.364] (II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
[    27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
[    27.433] (II) intel(0): Using hsync ranges from config file
[    27.433] (II) intel(0): Using vrefresh ranges from config file
[    27.433] (II) intel(0): Printing DDC gathered Modelines:
[    27.433] (II) intel(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[    27.434] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    27.434] (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    27.434] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[    27.434] (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[    27.434] (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[    27.434] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    27.434] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
[    27.434] (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[    27.434] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[    27.434] (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[    27.434] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    27.434] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[    27.434] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[    27.434] (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[    27.434] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[    27.434] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[    27.434] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    27.434] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    27.434] (II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    27.434] (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    27.434] (II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
[    33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[    33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    39.057] (EE) intel(0): failed to set cursor: Input/output error
[    39.057] (EE) intel(0): failed to set cursor: Input/output error
[    39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    39.255] (EE) intel(0): failed to set cursor: Input/output error
[    39.255] (EE) intel(0): failed to set cursor: Input/output error
[    39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    42.522] (EE) intel(0): failed to set cursor: Input/output error
[    42.522] (EE) intel(0): failed to set cursor: Input/output error
[    42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[    42.695] (EE) intel(0): failed to set cursor: Input/output error
[    42.695] (EE) intel(0): failed to set cursor: Input/output error
[    45.970] (EE) intel(0): failed to set cursor: Input/output error
[    45.970] (EE) intel(0): failed to set cursor: Input/output error
[    46.957] (EE) intel(0): failed to set cursor: Input/output error
[    46.957] (EE) intel(0): failed to set cursor: Input/output error
[    53.971] (EE) intel(0): failed to set cursor: Input/output error
[    53.971] (EE) intel(0): failed to set cursor: Input/output error
[    54.206] (EE) intel(0): failed to set cursor: Input/output error
[    54.206] (EE) intel(0): failed to set cursor: Input/output error
[    54.804] (EE) intel(0): failed to set cursor: Input/output error
[    54.804] (EE) intel(0): failed to set cursor: Input/output error
[    72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[    72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    72.861] (**) USB Optical Mouse: always reports core events
[    72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
[    72.866] (--) USB Optical Mouse: Found 3 mouse buttons
[    72.866] (--) USB Optical Mouse: Found scroll wheel(s)
[    72.866] (--) USB Optical Mouse: Found relative axes
[    72.866] (--) USB Optical Mouse: Found x and y relative axes
[    72.866] (II) USB Optical Mouse: Configuring as mouse
[    72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
[    72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
[    72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    72.867] (II) USB Optical Mouse: initialized for relative axes.
[    72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    72.868] (II) No input driver/identifier specified (ignoring)
[    84.484] (EE) intel(0): failed to set cursor: Input/output error
[    84.484] (EE) intel(0): failed to set cursor: Input/output error
[   136.555] (EE) intel(0): failed to set cursor: Input/output error
[   136.555] (EE) intel(0): failed to set cursor: Input/output error
[   163.561] (EE) intel(0): failed to set cursor: Input/output error
[   163.561] (EE) intel(0): failed to set cursor: Input/output error
[   176.751] (EE) intel(0): failed to set cursor: Input/output error
[   176.752] (EE) intel(0): failed to set cursor: Input/output error
[   179.565] (EE) intel(0): failed to set cursor: Input/output error
[   179.565] (EE) intel(0): failed to set cursor: Input/output error
[   179.613] (EE) intel(0): failed to set cursor: Input/output error
[   179.613] (EE) intel(0): failed to set cursor: Input/output error
[   190.939] (EE) intel(0): failed to set cursor: Input/output error
[   190.939] (EE) intel(0): failed to set cursor: Input/output error
[   196.719] (EE) intel(0): failed to set cursor: Input/output error
[   196.719] (EE) intel(0): failed to set cursor: Input/output error
[   197.007] (EE) intel(0): failed to set cursor: Input/output error
[   197.007] (EE) intel(0): failed to set cursor: Input/output error
[   200.991] (EE) intel(0): failed to set cursor: Input/output error
[   200.991] (EE) intel(0): failed to set cursor: Input/output error
[   202.499] (EE) intel(0): failed to set cursor: Input/output error
[   202.499] (EE) intel(0): failed to set cursor: Input/output error
[   203.164] (EE) intel(0): failed to set cursor: Input/output error
[   203.164] (EE) intel(0): failed to set cursor: Input/output error
[   207.322] (EE) intel(0): failed to set cursor: Input/output error
[   207.323] (EE) intel(0): failed to set cursor: Input/output error
[   208.093] (EE) intel(0): failed to set cursor: Input/output error
[   208.094] (EE) intel(0): failed to set cursor: Input/output error
[   209.080] (EE) intel(0): failed to set cursor: Input/output error
[   209.081] (EE) intel(0): failed to set cursor: Input/output error
[   209.641] (EE) intel(0): failed to set cursor: Input/output error
[   209.642] (EE) intel(0): failed to set cursor: Input/output error
[   214.392] (EE) intel(0): failed to set cursor: Input/output error
[   214.392] (EE) intel(0): failed to set cursor: Input/output error
[   214.885] (EE) intel(0): failed to set cursor: Input/output error
[   214.885] (EE) intel(0): failed to set cursor: Input/output error
[   225.899] (EE) intel(0): failed to set cursor: Input/output error
[   225.899] (EE) intel(0): failed to set cursor: Input/output error
[   225.912] (EE) intel(0): failed to set cursor: Input/output error
[   225.913] (EE) intel(0): failed to set cursor: Input/output error
[   244.351] (EE) intel(0): failed to set cursor: Input/output error
[   244.351] (EE) intel(0): failed to set cursor: Input/output error
[   245.332] (EE) intel(0): failed to set cursor: Input/output error
[   245.332] (EE) intel(0): failed to set cursor: Input/output error
[   248.711] (EE) intel(0): failed to set cursor: Input/output error
[   248.712] (EE) intel(0): failed to set cursor: Input/output error
[   249.347] (EE) intel(0): failed to set cursor: Input/output error
[   249.348] (EE) intel(0): failed to set cursor: Input/output error
[   252.594] (EE) intel(0): failed to set cursor: Input/output error
[   252.594] (EE) intel(0): failed to set cursor: Input/output error
[   253.062] (EE) intel(0): failed to set cursor: Input/output error
[   253.062] (EE) intel(0): failed to set cursor: Input/output error
[   273.635] (EE) intel(0): failed to set cursor: Input/output error
[   273.635] (EE) intel(0): failed to set cursor: Input/output error
[   274.148] (EE) intel(0): failed to set cursor: Input/output error
[   274.148] (EE) intel(0): failed to set cursor: Input/output error
[   285.208] (EE) intel(0): failed to set cursor: Input/output error
[   285.208] (EE) intel(0): failed to set cursor: Input/output error
[   287.473] (EE) intel(0): failed to set cursor: Input/output error
[   287.473] (EE) intel(0): failed to set cursor: Input/output error
[   353.216] (EE) intel(0): failed to set cursor: Input/output error
[   353.216] (EE) intel(0): failed to set cursor: Input/output error
[   355.928] (EE) intel(0): failed to set cursor: Input/output error
[   355.928] (EE) intel(0): failed to set cursor: Input/output error
[   357.845] (EE) intel(0): failed to set cursor: Input/output error
[   357.845] (EE) intel(0): failed to set cursor: Input/output error
[   360.465] (EE) intel(0): failed to set cursor: Input/output error
[   360.465] (EE) intel(0): failed to set cursor: Input/output error
[   361.916] (EE) intel(0): failed to set cursor: Input/output error
[   361.917] (EE) intel(0): failed to set cursor: Input/output error
[   363.505] (EE) intel(0): failed to set cursor: Input/output error
[   363.505] (EE) intel(0): failed to set cursor: Input/output error
[   364.433] (EE) intel(0): failed to set cursor: Input/output error
[   364.433] (EE) intel(0): failed to set cursor: Input/output error
[   366.375] (EE) intel(0): failed to set cursor: Input/output error
[   366.375] (EE) intel(0): failed to set cursor: Input/output error
[   367.953] (EE) intel(0): failed to set cursor: Input/output error
[   367.954] (EE) intel(0): failed to set cursor: Input/output error
[   369.092] (EE) intel(0): failed to set cursor: Input/output error
[   369.092] (EE) intel(0): failed to set cursor: Input/output error
[   372.906] (EE) intel(0): failed to set cursor: Input/output error
[   372.906] (EE) intel(0): failed to set cursor: Input/output error
[   374.450] (EE) intel(0): failed to set cursor: Input/output error
[   374.451] (EE) intel(0): failed to set cursor: Input/output error
[   376.802] (EE) intel(0): failed to set cursor: Input/output error
[   376.803] (EE) intel(0): failed to set cursor: Input/output error
[   378.140] (EE) intel(0): failed to set cursor: Input/output error
[   378.140] (EE) intel(0): failed to set cursor: Input/output error
[   382.347] (EE) intel(0): failed to set cursor: Input/output error
[   382.347] (EE) intel(0): failed to set cursor: Input/output error
[   383.812] (EE) intel(0): failed to set cursor: Input/output error
[   383.812] (EE) intel(0): failed to set cursor: Input/output error
[   386.612] (EE) intel(0): failed to set cursor: Input/output error
[   386.612] (EE) intel(0): failed to set cursor: Input/output error
[   388.092] (EE) intel(0): failed to set cursor: Input/output error
[   388.092] (EE) intel(0): failed to set cursor: Input/output error
[   389.436] (EE) intel(0): failed to set cursor: Input/output error
[   389.436] (EE) intel(0): failed to set cursor: Input/output error
[   391.131] (EE) intel(0): failed to set cursor: Input/output error
[   391.131] (EE) intel(0): failed to set cursor: Input/output error
[   392.372] (EE) intel(0): failed to set cursor: Input/output error
[   392.373] (EE) intel(0): failed to set cursor: Input/output error
[   393.630] (EE) intel(0): failed to set cursor: Input/output error
[   393.631] (EE) intel(0): failed to set cursor: Input/output error
[   394.932] (EE) intel(0): failed to set cursor: Input/output error
[   394.933] (EE) intel(0): failed to set cursor: Input/output error
[   396.629] (EE) intel(0): failed to set cursor: Input/output error
[   396.629] (EE) intel(0): failed to set cursor: Input/output error
[   398.349] (EE) intel(0): failed to set cursor: Input/output error
[   398.349] (EE) intel(0): failed to set cursor: Input/output error
[   400.264] (EE) intel(0): failed to set cursor: Input/output error
[   400.264] (EE) intel(0): failed to set cursor: Input/output error
[   402.517] (EE) intel(0): failed to set cursor: Input/output error
[   402.518] (EE) intel(0): failed to set cursor: Input/output error
[   404.749] (EE) intel(0): failed to set cursor: Input/output error
[   404.749] (EE) intel(0): failed to set cursor: Input/output error
[   407.798] (EE) intel(0): failed to set cursor: Input/output error
[   407.798] (EE) intel(0): failed to set cursor: Input/output error
[   411.170] (EE) intel(0): failed to set cursor: Input/output error
[   411.170] (EE) intel(0): failed to set cursor: Input/output error
[   411.910] (EE) intel(0): failed to set cursor: Input/output error
[   411.912] (EE) intel(0): failed to set cursor: Input/output error
[   413.276] (EE) intel(0): failed to set cursor: Input/output error
[   413.276] (EE) intel(0): failed to set cursor: Input/output error
[   414.775] (EE) intel(0): failed to set cursor: Input/output error
[   414.775] (EE) intel(0): failed to set cursor: Input/output error
[   416.762] (EE) intel(0): failed to set cursor: Input/output error
[   416.763] (EE) intel(0): failed to set cursor: Input/output error
[   420.439] (EE) intel(0): failed to set cursor: Input/output error
[   420.440] (EE) intel(0): failed to set cursor: Input/output error
[   424.614] (EE) intel(0): failed to set cursor: Input/output error
[   424.614] (EE) intel(0): failed to set cursor: Input/output error
[   426.920] (EE) intel(0): failed to set cursor: Input/output error
[   426.920] (EE) intel(0): failed to set cursor: Input/output error
[   430.033] (EE) intel(0): failed to set cursor: Input/output error
[   430.033] (EE) intel(0): failed to set cursor: Input/output error
[   432.265] (EE) intel(0): failed to set cursor: Input/output error
[   432.265] (EE) intel(0): failed to set cursor: Input/output error
[   435.339] (EE) intel(0): failed to set cursor: Input/output error
[   435.339] (EE) intel(0): failed to set cursor: Input/output error
[   437.705] (EE) intel(0): failed to set cursor: Input/output error
[   437.706] (EE) intel(0): failed to set cursor: Input/output error
[   441.112] (EE) intel(0): failed to set cursor: Input/output error
[   441.112] (EE) intel(0): failed to set cursor: Input/output error
[   444.922] (EE) intel(0): failed to set cursor: Input/output error
[   444.922] (EE) intel(0): failed to set cursor: Input/output error
[   448.296] (EE) intel(0): failed to set cursor: Input/output error
[   448.296] (EE) intel(0): failed to set cursor: Input/output error
[   450.299] (EE) intel(0): failed to set cursor: Input/output error
[   450.299] (EE) intel(0): failed to set cursor: Input/output error
[   453.190] (EE) intel(0): failed to set cursor: Input/output error
[   453.191] (EE) intel(0): failed to set cursor: Input/output error
[   455.467] (EE) intel(0): failed to set cursor: Input/output error
[   455.468] (EE) intel(0): failed to set cursor: Input/output error
[   458.751] (EE) intel(0): failed to set cursor: Input/output error
[   458.751] (EE) intel(0): failed to set cursor: Input/output error
[   460.132] (EE) intel(0): failed to set cursor: Input/output error
[   460.132] (EE) intel(0): failed to set cursor: Input/output error
[   462.768] (EE) intel(0): failed to set cursor: Input/output error
[   462.770] (EE) intel(0): failed to set cursor: Input/output error
[   464.061] (EE) intel(0): failed to set cursor: Input/output error
[   464.061] (EE) intel(0): failed to set cursor: Input/output error
[   467.064] (EE) intel(0): failed to set cursor: Input/output error
[   467.064] (EE) intel(0): failed to set cursor: Input/output error
[   469.637] (EE) intel(0): failed to set cursor: Input/output error
[   469.637] (EE) intel(0): failed to set cursor: Input/output error
[   472.446] (EE) intel(0): failed to set cursor: Input/output error
[   472.447] (EE) intel(0): failed to set cursor: Input/output error
[   475.654] (EE) intel(0): failed to set cursor: Input/output error
[   475.654] (EE) intel(0): failed to set cursor: Input/output error
[   477.849] (EE) intel(0): failed to set cursor: Input/output error
[   477.852] (EE) intel(0): failed to set cursor: Input/output error
[   481.102] (EE) intel(0): failed to set cursor: Input/output error
[   481.102] (EE) intel(0): failed to set cursor: Input/output error
[   483.658] (EE) intel(0): failed to set cursor: Input/output error
[   483.658] (EE) intel(0): failed to set cursor: Input/output error
[   486.239] (EE) intel(0): failed to set cursor: Input/output error
[   486.239] (EE) intel(0): failed to set cursor: Input/output error
[   489.082] (EE) intel(0): failed to set cursor: Input/output error
[   489.083] (EE) intel(0): failed to set cursor: Input/output error
[   491.279] (EE) intel(0): failed to set cursor: Input/output error
[   491.280] (EE) intel(0): failed to set cursor: Input/output error
[   494.315] (EE) intel(0): failed to set cursor: Input/output error
[   494.315] (EE) intel(0): failed to set cursor: Input/output error
[   495.905] (EE) intel(0): failed to set cursor: Input/output error
[   495.905] (EE) intel(0): failed to set cursor: Input/output error
[   498.171] (EE) intel(0): failed to set cursor: Input/output error
[   498.172] (EE) intel(0): failed to set cursor: Input/output error
[   499.312] (EE) intel(0): failed to set cursor: Input/output error
[   499.313] (EE) intel(0): failed to set cursor: Input/output error
[   501.813] (EE) intel(0): failed to set cursor: Input/output error
[   501.813] (EE) intel(0): failed to set cursor: Input/output error
[   502.817] (EE) intel(0): failed to set cursor: Input/output error
[   502.817] (EE) intel(0): failed to set cursor: Input/output error
[   507.125] (EE) intel(0): failed to set cursor: Input/output error
[   507.125] (EE) intel(0): failed to set cursor: Input/output error
[   508.209] (EE) intel(0): failed to set cursor: Input/output error
[   508.210] (EE) intel(0): failed to set cursor: Input/output error
[   540.521] (EE) intel(0): failed to set cursor: Input/output error
[   540.526] (EE) intel(0): failed to set cursor: Input/output error
[   541.621] (EE) intel(0): failed to set cursor: Input/output error
[   541.621] (EE) intel(0): failed to set cursor: Input/output error
[   552.597] (EE) intel(0): failed to set cursor: Input/output error
[   552.597] (EE) intel(0): failed to set cursor: Input/output error
[   553.470] (EE) intel(0): failed to set cursor: Input/output error
[   553.471] (EE) intel(0): failed to set cursor: Input/output error
[   554.186] (EE) intel(0): failed to set cursor: Input/output error
[   554.186] (EE) intel(0): failed to set cursor: Input/output error
[   555.103] (EE) intel(0): failed to set cursor: Input/output error
[   555.103] (EE) intel(0): failed to set cursor: Input/output error
[   690.143] (EE) intel(0): failed to set cursor: Input/output error
[   690.143] (EE) intel(0): failed to set cursor: Input/output error
[   690.263] (EE) intel(0): failed to set cursor: Input/output error
[   690.263] (EE) intel(0): failed to set cursor: Input/output error
[   690.333] (EE) intel(0): failed to set cursor: Input/output error
[   690.333] (EE) intel(0): failed to set cursor: Input/output error
[   690.557] (EE) intel(0): failed to set cursor: Input/output error
[   690.557] (EE) intel(0): failed to set cursor: Input/output error
[   690.591] (EE) intel(0): failed to set cursor: Input/output error
[   690.591] (EE) intel(0): failed to set cursor: Input/output error
[   690.606] (EE) intel(0): failed to set cursor: Input/output error
[   690.607] (EE) intel(0): failed to set cursor: Input/output error
[   691.055] (EE) intel(0): failed to set cursor: Input/output error
[   691.055] (EE) intel(0): failed to set cursor: Input/output error
[   691.070] (EE) intel(0): failed to set cursor: Input/output error
[   691.071] (EE) intel(0): failed to set cursor: Input/output error
[   755.300] (EE) intel(0): failed to set cursor: Input/output error
[   755.300] (EE) intel(0): failed to set cursor: Input/output error
[   755.444] (EE) intel(0): failed to set cursor: Input/output error
[   755.444] (EE) intel(0): failed to set cursor: Input/output error
[   765.910] (EE) intel(0): failed to set cursor: Input/output error
[   765.911] (EE) intel(0): failed to set cursor: Input/output error
[   769.826] (EE) intel(0): failed to set cursor: Input/output error
[   769.827] (EE) intel(0): failed to set cursor: Input/output error
[   771.279] (EE) intel(0): failed to set cursor: Input/output error
[   771.279] (EE) intel(0): failed to set cursor: Input/output error
[   776.475] (EE) intel(0): failed to set cursor: Input/output error
[   776.475] (EE) intel(0): failed to set cursor: Input/output error
[   777.584] (EE) intel(0): failed to set cursor: Input/output error
[   777.584] (EE) intel(0): failed to set cursor: Input/output error
[   782.163] (EE) intel(0): failed to set cursor: Input/output error
[   782.163] (EE) intel(0): failed to set cursor: Input/output error
[   784.345] (EE) intel(0): failed to set cursor: Input/output error
[   784.345] (EE) intel(0): failed to set cursor: Input/output error
[   789.813] (EE) intel(0): failed to set cursor: Input/output error
[   789.814] (EE) intel(0): failed to set cursor: Input/output error
[   793.986] (EE) intel(0): failed to set cursor: Input/output error
[   793.986] (EE) intel(0): failed to set cursor: Input/output error
[   796.717] (EE) intel(0): failed to set cursor: Input/output error
[   796.717] (EE) intel(0): failed to set cursor: Input/output error
[   802.971] (EE) intel(0): failed to set cursor: Input/output error
[   802.971] (EE) intel(0): failed to set cursor: Input/output error
[   805.567] (EE) intel(0): failed to set cursor: Input/output error
[   805.568] (EE) intel(0): failed to set cursor: Input/output error
[   807.811] (EE) intel(0): failed to set cursor: Input/output error
[   807.811] (EE) intel(0): failed to set cursor: Input/output error
[   814.410] (EE) intel(0): failed to set cursor: Input/output error
[   814.410] (EE) intel(0): failed to set cursor: Input/output error
[   815.460] (EE) intel(0): failed to set cursor: Input/output error
[   815.460] (EE) intel(0): failed to set cursor: Input/output error
[   818.800] (EE) intel(0): failed to set cursor: Input/output error
[   818.800] (EE) intel(0): failed to set cursor: Input/output error
[   821.589] (EE) intel(0): failed to set cursor: Input/output error
[   821.589] (EE) intel(0): failed to set cursor: Input/output error
[   825.657] (EE) intel(0): failed to set cursor: Input/output error
[   825.657] (EE) intel(0): failed to set cursor: Input/output error
[   828.078] (EE) intel(0): failed to set cursor: Input/output error
[   828.078] (EE) intel(0): failed to set cursor: Input/output error
[   831.833] (EE) intel(0): failed to set cursor: Input/output error
[   831.834] (EE) intel(0): failed to set cursor: Input/output error
[   833.806] (EE) intel(0): failed to set cursor: Input/output error
[   833.807] (EE) intel(0): failed to set cursor: Input/output error
[   835.978] (EE) intel(0): failed to set cursor: Input/output error
[   835.978] (EE) intel(0): failed to set cursor: Input/output error
[   840.143] (EE) intel(0): failed to set cursor: Input/output error
[   840.143] (EE) intel(0): failed to set cursor: Input/output error
[   854.335] (EE) intel(0): failed to set cursor: Input/output error
[   854.335] (EE) intel(0): failed to set cursor: Input/output error
[   855.471] (EE) intel(0): failed to set cursor: Input/output error
[   855.471] (EE) intel(0): failed to set cursor: Input/output error
[   867.428] (EE) intel(0): failed to set cursor: Input/output error
[   867.429] (EE) intel(0): failed to set cursor: Input/output error
[   870.354] (EE) intel(0): failed to set cursor: Input/output error
[   870.355] (EE) intel(0): failed to set cursor: Input/output error
[   873.062] (EE) intel(0): failed to set cursor: Input/output error
[   873.062] (EE) intel(0): failed to set cursor: Input/output error
[   873.955] (EE) intel(0): failed to set cursor: Input/output error
[   873.955] (EE) intel(0): failed to set cursor: Input/output error
[   877.131] (EE) intel(0): failed to set cursor: Input/output error
[   877.132] (EE) intel(0): failed to set cursor: Input/output error
[   878.020] (EE) intel(0): failed to set cursor: Input/output error
[   878.021] (EE) intel(0): failed to set cursor: Input/output error
[   880.499] (EE) intel(0): failed to set cursor: Input/output error
[   880.499] (EE) intel(0): failed to set cursor: Input/output error
[   881.708] (EE) intel(0): failed to set cursor: Input/output error
[   881.708] (EE) intel(0): failed to set cursor: Input/output error
[   884.711] (EE) intel(0): failed to set cursor: Input/output error
[   884.711] (EE) intel(0): failed to set cursor: Input/output error
[   893.533] (EE) intel(0): failed to set cursor: Input/output error
[   893.533] (EE) intel(0): failed to set cursor: Input/output error
[   896.537] (EE) intel(0): failed to set cursor: Input/output error
[   896.537] (EE) intel(0): failed to set cursor: Input/output error
[   898.029] (EE) intel(0): failed to set cursor: Input/output error
[   898.030] (EE) intel(0): failed to set cursor: Input/output error
[   901.447] (EE) intel(0): failed to set cursor: Input/output error
[   901.447] (EE) intel(0): failed to set cursor: Input/output error
[   902.670] (EE) intel(0): failed to set cursor: Input/output error
[   902.670] (EE) intel(0): failed to set cursor: Input/output error
[   907.266] (EE) intel(0): failed to set cursor: Input/output error
[   907.267] (EE) intel(0): failed to set cursor: Input/output error
[   908.415] (EE) intel(0): failed to set cursor: Input/output error
[   908.415] (EE) intel(0): failed to set cursor: Input/output error
[   911.083] (EE) intel(0): failed to set cursor: Input/output error
[   911.083] (EE) intel(0): failed to set cursor: Input/output error
[   912.335] (EE) intel(0): failed to set cursor: Input/output error
[   912.335] (EE) intel(0): failed to set cursor: Input/output error
[   914.699] (EE) intel(0): failed to set cursor: Input/output error
[   914.699] (EE) intel(0): failed to set cursor: Input/output error
[   915.519] (EE) intel(0): failed to set cursor: Input/output error
[   915.520] (EE) intel(0): failed to set cursor: Input/output error
[   921.179] (EE) intel(0): failed to set cursor: Input/output error
[   921.180] (EE) intel(0): failed to set cursor: Input/output error
[   923.296] (EE) intel(0): failed to set cursor: Input/output error
[   923.297] (EE) intel(0): failed to set cursor: Input/output error
[   926.020] (EE) intel(0): failed to set cursor: Input/output error
[   926.021] (EE) intel(0): failed to set cursor: Input/output error
[   926.881] (EE) intel(0): failed to set cursor: Input/output error
[   926.881] (EE) intel(0): failed to set cursor: Input/output error
[   930.252] (EE) intel(0): failed to set cursor: Input/output error
[   930.252] (EE) intel(0): failed to set cursor: Input/output error
[   931.105] (EE) intel(0): failed to set cursor: Input/output error
[   931.105] (EE) intel(0): failed to set cursor: Input/output error
[   938.375] (EE) intel(0): failed to set cursor: Input/output error
[   938.376] (EE) intel(0): failed to set cursor: Input/output error
[   951.395] (EE) intel(0): failed to set cursor: Input/output error
[   951.396] (EE) intel(0): failed to set cursor: Input/output error
[   997.695] (EE) intel(0): failed to set cursor: Input/output error
[   997.695] (EE) intel(0): failed to set cursor: Input/output error
[  1034.261] (EE) intel(0): failed to set cursor: Input/output error
[  1034.261] (EE) intel(0): failed to set cursor: Input/output error
[  1042.673] (EE) intel(0): failed to set cursor: Input/output error
[  1042.674] (EE) intel(0): failed to set cursor: Input/output error
[  1058.408] (EE) intel(0): failed to set cursor: Input/output error
[  1058.408] (EE) intel(0): failed to set cursor: Input/output error
[  1061.964] (EE) intel(0): failed to set cursor: Input/output error
[  1061.964] (EE) intel(0): failed to set cursor: Input/output error
[  1062.632] (EE) intel(0): failed to set cursor: Input/output error
[  1062.632] (EE) intel(0): failed to set cursor: Input/output error
[  1172.841] (EE) intel(0): failed to set cursor: Input/output error
[  1172.841] (EE) intel(0): failed to set cursor: Input/output error
[  1176.307] (EE) intel(0): failed to set cursor: Input/output error
[  1176.307] (EE) intel(0): failed to set cursor: Input/output error
[  1186.759] (EE) intel(0): failed to set cursor: Input/output error
[  1186.759] (EE) intel(0): failed to set cursor: Input/output error
[  1186.775] (EE) intel(0): failed to set cursor: Input/output error
[  1186.775] (EE) intel(0): failed to set cursor: Input/output error
[  1187.130] (EE) intel(0): failed to set cursor: Input/output error
[  1187.130] (EE) intel(0): failed to set cursor: Input/output error
[  1187.135] (EE) intel(0): failed to set cursor: Input/output error
[  1187.135] (EE) intel(0): failed to set cursor: Input/output error
[  1454.672] (EE) intel(0): failed to set cursor: Input/output error
[  1454.672] (EE) intel(0): failed to set cursor: Input/output error
[  1472.918] (EE) intel(0): failed to set cursor: Input/output error
[  1472.918] (EE) intel(0): failed to set cursor: Input/output error
[  1504.758] (EE) intel(0): failed to set cursor: Input/output error
[  1504.758] (EE) intel(0): failed to set cursor: Input/output error
[  1516.662] (EE) intel(0): failed to set cursor: Input/output error
[  1516.663] (EE) intel(0): failed to set cursor: Input/output error
[  1605.129] (EE) intel(0): failed to set cursor: Input/output error
[  1605.129] (EE) intel(0): failed to set cursor: Input/output error
[  1608.614] (EE) intel(0): failed to set cursor: Input/output error
[  1608.614] (EE) intel(0): failed to set cursor: Input/output error
[  1609.086] (EE) intel(0): failed to set cursor: Input/output error
[  1609.086] (EE) intel(0): failed to set cursor: Input/output error

I'm using xf86-video-intel. I rebuilded mkinitcpio with "intel-agp i915" but this didn't help.

Any ideas?

Last edited by vmario (2011-01-31 09:08:26)

Offline

#2 2011-02-03 13:07:48

vmario
Member
Registered: 2011-01-31
Posts: 2

Re: A few seconds after start the GDM mouse stops working

I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

Offline

Board footer

Powered by FluxBB