Arch Linux

Nahuel

Member

Registered: 2009-07-05

Posts: 10

HAL not mounting removable drives after system update

I updated all packages yestarday and after reboot, some xfce4 stuff wouldn't work (which I suppose is kinda understandable since the update seems to be big). No problems with that, quickly re-configured what was causing trouble.
HAL isn't working at all now though. I can mount usb disks manually, but nothing happens when I insert them... I followed many HAL troubleshooting instructions in the Wiki and even in these forums, but with no success.

Here's my hal.conf (to which I had to re-add the last lines because they were gone after the update. The file was apparently back to it's default values.)

<!DOCTYPE busconfig PUBLIC
 "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
 "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>

  <!-- This configuration file specifies the required security policies
       for the HAL to work. -->

  <!-- Only root or user hal can own the HAL service -->
  <policy user="hal">
    <allow own="org.freedesktop.Hal"/>
  </policy>
  <policy user="root">
    <allow own="org.freedesktop.Hal"/>
  </policy>

  <!-- Allow anyone to invoke methods on the Manager and Device interfaces -->
  <policy context="default">
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.DBus.Introspectable"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.DBus.Properties" />

    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Manager"/>
  </policy>

  <!-- Only allow users at the local console to manipulate devices -->
  <policy at_console="true">
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.CPUFreq"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.DockStation"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.KillSwitch"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.KeyboardBacklight"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Leds"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.LightSensor"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Storage"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Storage.Removable"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Volume"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.WakeOnLan"/>

  </policy>

  <!-- well,...and root too -->
  <policy user="root">
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.CPUFreq"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.DockStation"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.KillSwitch"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.KeyboardBacklight"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Leds"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.LightSensor"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Storage"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Storage.Removable"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Volume"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
    <allow send_destination="org.freedesktop.Hal"
           send_interface="org.freedesktop.Hal.Device.WakeOnLan"/>

  </policy>
<policy group="power">
   <allow send_interface="org.freedesktop.Hal.Device.SystemPowerManagement"/>
   <allow send_interface="org.freedesktop.Hal.Device.LaptopPanel"/>
 </policy>

 <policy group="storage">
   <allow send_interface="org.freedesktop.Hal.Device.Volume"/>
   <allow send_interface="org.freedesktop.Hal.Device.Volume.Crypto"/>
 </policy>

</busconfig>

skunktrader

Member

From: Brisbane, Australia

Registered: 2010-02-14

Posts: 1,543

Re: HAL not mounting removable drives after system update

The latest version of xfce doesn't use hal any more.  Search the forum for numerous threads on how to get automounting to work

Nahuel

Member

Registered: 2009-07-05

Posts: 10

Re: HAL not mounting removable drives after system update

Thanks. I've read that somewhere, didn't really take it seriously. Apparently an alternative is udisks. Can anyone give me some tips to make it work? My googling isn't very effective today. Thanks!