Oops message in i915 macbook

cvalente · 2011-03-11 01:44:05

Recently I started being unable to boot linux in my Macbook. The console (framebuffer) works well but once I try to start X I just get a blank screen and can't do anything else.

Just made an update (pacman -Suy) and the problem persists.

During boot I get the following oops message.

Any relevant information regarding this is welcome.

Thanks in advance.

Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/scsi_level
CPU 1
Modules linked in: uvcvideo videodev v4l1_compat v4l2_compat_ioctl32 cpufreq_userspace cpufreq_powersave cpufreq_conservative cpufreq_ondemand acpi_cpufreq freq_table mperf i915(+) drm_kms_helper drm i2c_algo_bit coretemp eeprom btusb bluetooth rfkill snd_hda_codec_realtek snd_seq_dummy isight_firmware snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_hda_intel firewire_ohci firewire_core crc_itu_t snd_hda_codec i2c_i801 i2c_core appletouch joydev snd_hwdep snd_pcm_oss video output intel_agp intel_gtt applesmc input_polldev processor button sg ac battery iTCO_wdt iTCO_vendor_support pcspkr snd_pcm snd_timer snd_page_alloc mbp_nvidia_bl evdev snd_mixer_oss snd soundcore sky2 lib80211 ext3 jbd mbcache cryptd aes_x86_64 aes_generic xts gf128mul hid_apple usbhid hid dm_crypt dm_mod uhci_hcd ehci_hcd sr_mod usbcore cdrom sd_mod ata_piix ata_generic pata_acpi libata scsi_mod

Pid: 2411, comm: modprobe Not tainted 2.6.37-ARCH #1 Apple Inc. MacBook3,1/Mac-F22788C8
RIP: 0010:[<ffffffffa04c121c>]  [<ffffffffa04c121c>] intel_sdvo_ddc_proxy_func+0xc/0x20 [i915]
RSP: 0018:ffff8800942cd878  EFLAGS: 00010246
RAX: ffff88009389b000 RBX: ffff88009389b070 RCX: 0000000000000000
RDX: 0000000000000050 RSI: 0000000000000050 RDI: 0000000000000000
RBP: ffff8800942cd878 R08: 0000000000000000 R09: ffff880093d79000
R10: dead000000100100 R11: 0000000000000000 R12: 0000000000000050
R13: ffffffffa02336a0 R14: ffff880093d79000 R15: 0000000000000050
FS:  00007f104fb96700(0000) GS:ffff88009db00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000010 CR3: 0000000093d5b000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 2411, threadinfo ffff8800942cc000, task ffff88009820be70)
Stack:
 ffff8800942cd8d8 ffffffffa00a989a ffff88009389b070 ffff88009389b070
 ffffffffa02336a0 ffff880093d79000 ffff8800942cd8d8 ffffffffa00a7906
 ffffffffa02336c0 0000000091f177ed ffffffffa02336c0 ffff88009389b070
Call Trace:
 [<ffffffffa00a989a>] i2c_default_probe+0x4a/0x140 [i2c_core]
 [<ffffffffa00a7906>] ? i2c_check_addr_busy+0x36/0x60 [i2c_core]
 [<ffffffffa00a9b30>] i2c_detect+0x1a0/0x320 [i2c_core]
 [<ffffffff811a1b2a>] ? sysfs_do_create_link+0xda/0x220
 [<ffffffff812ad742>] ? put_device+0x12/0x20
 [<ffffffffa00a9d00>] ? __process_new_adapter+0x0/0x40 [i2c_core]
 [<ffffffffa00a9d23>] __process_new_adapter+0x23/0x40 [i2c_core]
 [<ffffffff812b0604>] bus_for_each_drv+0x64/0x90
 [<ffffffffa00a87ad>] i2c_register_adapter+0x16d/0x270 [i2c_core]
 [<ffffffffa00a8a59>] i2c_add_adapter+0xa9/0xc0 [i2c_core]
 [<ffffffffa04c4fac>] intel_sdvo_init+0xbc/0x860 [i915]
 [<ffffffffa046c518>] ? drm_sysfs_connector_add+0x1d8/0x200 [drm]
 [<ffffffffa04b8a2e>] intel_modeset_init+0xede/0x12d0 [i915]
 [<ffffffffa048d760>] ? i915_switcheroo_can_switch+0x0/0x50 [i915]
 [<ffffffffa048fcb8>] i915_driver_load+0x8b8/0x12b0 [i915]
 [<ffffffffa046c881>] ? drm_sysfs_device_add+0x81/0xb0 [drm]
 [<ffffffffa0469261>] ? drm_get_minor+0x1c1/0x350 [drm]
 [<ffffffffa046b6b3>] drm_get_pci_dev+0x183/0x340 [drm]
 [<ffffffffa04d2f23>] i915_pci_probe+0x1b/0x1d [i915]
 [<ffffffff8121342a>] local_pci_probe+0x5a/0xd0
 [<ffffffff81213bc0>] pci_device_probe+0x80/0xb0
 [<ffffffff812b173a>] ? driver_sysfs_add+0x7a/0xb0
 [<ffffffff812b1a16>] driver_probe_device+0x96/0x1c0
 [<ffffffff812b1bdb>] __driver_attach+0x9b/0xa0
 [<ffffffff812b1b40>] ? __driver_attach+0x0/0xa0
 [<ffffffff812b095e>] bus_for_each_dev+0x5e/0x90
 [<ffffffff812b16b9>] driver_attach+0x19/0x20
 [<ffffffff812b1248>] bus_add_driver+0x158/0x300
 [<ffffffffa02dd000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffff812b1e51>] driver_register+0x71/0x140
 [<ffffffff813a5fc9>] ? mutex_unlock+0x9/0x10
 [<ffffffffa02dd000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffff81213e51>] __pci_register_driver+0x51/0xd0
 [<ffffffffa046bc90>] drm_pci_init+0xd0/0xe0 [drm]
 [<ffffffffa02dd000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffffa0463753>] drm_init+0x53/0x70 [drm]
 [<ffffffffa02dd094>] i915_init+0x94/0x96 [i915]
 [<ffffffff8100212f>] do_one_initcall+0x3f/0x180
 [<ffffffff8109415b>] sys_init_module+0xbb/0x200
 [<ffffffff8100bed2>] system_call_fastpath+0x16/0x1b
Code: 00 b0 1d 8b 59 48 39 5e 48 7f 0c 8b 59 5c 39 5e 5c 0f 4e c2 0f 1f 00 5b c9 c3 0f 1f 44 00 00 55 48 8b 47 18 48 89 e5 48 8b 78 60 <48> 8b 47 10 ff 50 10 c9 c3 66 66 2e 0f 1f 84 00 00 00 00 00 55
RIP  [<ffffffffa04c121c>] intel_sdvo_ddc_proxy_func+0xc/0x20 [i915]
 RSP <ffff8800942cd878>
CR2: 0000000000000010
---[ end trace 682ab127e57c8b65 ]---

nTia89 · 2011-03-11 11:07:39

could be a kernel issue

try to downgrade it

Arch Linux

#1 2011-03-11 01:44:05

Oops message in i915 macbook

#2 2011-03-11 11:07:39

Re: Oops message in i915 macbook

Board footer