Segfault on quake3 engine games

Edo · 2011-04-24 15:39:25

Hi there all. Thought I'd fire up a spot of Enemy Territory today so I installed it from AUR no problems. Though when I loaded it up and reached the initial config screen the performance was ridiculously low, I could even navigate the menu properly since the mouse lag was something like 5+ seconds. I have a brand new i7 using the i915 driver so performance really shouldn't be that bad.

I had a poke about on the Intel wiki page and there was a line in there about might needing to install lib32-intel-dri. Fairly sure it's running in 64-bit native but decided to give it a go and now the program just tries to load and then segfaults:

----- finished R_Init -----
Sys_LoadDll(/home/me/.etwolf/etmain/ui.mp.i386.so)... 
Sys_LoadDll(/home/me/.etwolf/etmain/ui.mp.i386.so) failed:
"/home/me/.etwolf/etmain/ui.mp.i386.so: cannot open shared object file: No such file or directory"
Sys_LoadDll(/opt/enemy-territory/etmain/ui.mp.i386.so)... ok
Sys_LoadDll(ui) found **vmMain** at  0xf1b20f40  
Sys_LoadDll(ui) succeeded!
X Error of failed request: BadRequest (invalid request code or no such operation)
  Major opcode of failed request: 0
  Minor opcode of failed request: 0
  Serial number of failed request: 5607
Received signal 11, exiting...
Segmentation fault

Tried true-combat too and basically the same error. Any ideas on how to proceed with this?

Last edited by Edo (2011-04-24 15:40:24)

Edo · 2011-04-25 10:45:03

Could it be related to the X crashes I'm getting on other fullscreen media like flash or VLC?

[  2846.348] 
X.Org X Server 1.10.1
Release Date: 2011-04-15
[  2846.353] X Protocol Version 11, Revision 0
[  2846.354] Build Operating System: Linux 2.6.38-ARCH x86_64 
[  2846.355] Current Operating System: Linux vaio 2.6.38-ARCH #1 SMP PREEMPT Sun Apr 17 15:18:58 CEST 2011 x86_64
[  2846.357] Kernel command line: root=/dev/disk/by-uuid/f545bb81-fecc-4602-b107-f75d65fe59a6 ro i915.modeset=1
[  2846.358] Build Date: 16 April 2011  12:02:01PM
[  2846.360]  
[  2846.361] Current version of pixman: 0.20.2
[  2846.362]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  2846.365] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2846.369] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 25 18:53:01 2011
[  2846.370] (==) Using config file: "/etc/X11/xorg.conf"
[  2846.371] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2846.373] (==) No Layout section.  Using the first Screen section.
[  2846.373] (==) No screen section available. Using defaults.
[  2846.373] (**) |-->Screen "Default Screen Section" (0)
[  2846.373] (**) |   |-->Monitor "<default monitor>"
[  2846.373] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[  2846.373] (==) Automatically adding devices
[  2846.373] (==) Automatically enabling devices
[  2846.373] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  2846.373]     Entry deleted from font path.
[  2846.373] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[  2846.373] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2846.373] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2846.373] (II) Loader magic: 0x7d6fa0
[  2846.373] (II) Module ABI versions:
[  2846.373]     X.Org ANSI C Emulation: 0.4
[  2846.373]     X.Org Video Driver: 10.0
[  2846.373]     X.Org XInput driver : 12.2
[  2846.373]     X.Org Server Extension : 5.0
[  2846.374] (--) PCI:*(0:0:2:0) 8086:0116:1028:050e rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[  2846.374] (--) PCI: (0:1:0:0) 10de:0df4:1028:050e rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[  2846.374] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2846.374] (II) LoadModule: "extmod"
[  2846.374] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[  2846.375] (II) Module extmod: vendor="X.Org Foundation"
[  2846.375]     compiled for 1.10.1, module version = 1.0.0
[  2846.375]     Module class: X.Org Server Extension
[  2846.375]     ABI class: X.Org Server Extension, version 5.0
[  2846.375] (II) Loading extension MIT-SCREEN-SAVER
[  2846.375] (II) Loading extension XFree86-VidModeExtension
[  2846.375] (II) Loading extension XFree86-DGA
[  2846.375] (II) Loading extension DPMS
[  2846.375] (II) Loading extension XVideo
[  2846.375] (II) Loading extension XVideo-MotionCompensation
[  2846.375] (II) Loading extension X-Resource
[  2846.375] (II) LoadModule: "dbe"
[  2846.375] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[  2846.375] (II) Module dbe: vendor="X.Org Foundation"
[  2846.375]     compiled for 1.10.1, module version = 1.0.0
[  2846.375]     Module class: X.Org Server Extension
[  2846.375]     ABI class: X.Org Server Extension, version 5.0
[  2846.375] (II) Loading extension DOUBLE-BUFFER
[  2846.375] (II) LoadModule: "glx"
[  2846.375] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2846.375] (II) Module glx: vendor="X.Org Foundation"
[  2846.375]     compiled for 1.10.1, module version = 1.0.0
[  2846.375]     ABI class: X.Org Server Extension, version 5.0
[  2846.375] (==) AIGLX enabled
[  2846.375] (II) Loading extension GLX
[  2846.375] (II) LoadModule: "record"
[  2846.375] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[  2846.375] (II) Module record: vendor="X.Org Foundation"
[  2846.375]     compiled for 1.10.1, module version = 1.13.0
[  2846.375]     Module class: X.Org Server Extension
[  2846.375]     ABI class: X.Org Server Extension, version 5.0
[  2846.375] (II) Loading extension RECORD
[  2846.375] (II) LoadModule: "dri"
[  2846.376] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[  2846.376] (II) Module dri: vendor="X.Org Foundation"
[  2846.376]     compiled for 1.10.1, module version = 1.0.0
[  2846.376]     ABI class: X.Org Server Extension, version 5.0
[  2846.376] (II) Loading extension XFree86-DRI
[  2846.376] (II) LoadModule: "dri2"
[  2846.376] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  2846.376] (II) Module dri2: vendor="X.Org Foundation"
[  2846.376]     compiled for 1.10.1, module version = 1.2.0
[  2846.376]     ABI class: X.Org Server Extension, version 5.0
[  2846.376] (II) Loading extension DRI2
[  2846.376] (==) Matched intel as autoconfigured driver 0
[  2846.376] (==) Matched vesa as autoconfigured driver 1
[  2846.376] (==) Matched fbdev as autoconfigured driver 2
[  2846.376] (==) Assigned the driver to the xf86ConfigLayout
[  2846.376] (II) LoadModule: "intel"
[  2846.376] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  2846.376] (II) Module intel: vendor="X.Org Foundation"
[  2846.376]     compiled for 1.10.0.902, module version = 2.15.0
[  2846.376]     Module class: X.Org Video Driver
[  2846.376]     ABI class: X.Org Video Driver, version 10.0
[  2846.376] (II) LoadModule: "vesa"
[  2846.376] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  2846.376] (II) Module vesa: vendor="X.Org Foundation"
[  2846.376]     compiled for 1.10.0, module version = 2.3.0
[  2846.376]     Module class: X.Org Video Driver
[  2846.376]     ABI class: X.Org Video Driver, version 10.0
[  2846.376] (II) LoadModule: "fbdev"
[  2846.377] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  2846.377] (II) Module fbdev: vendor="X.Org Foundation"
[  2846.377]     compiled for 1.10.0, module version = 0.4.2
[  2846.377]     ABI class: X.Org Video Driver, version 10.0
[  2846.377] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
[  2846.377] (II) VESA: driver for VESA chipsets: vesa
[  2846.377] (II) FBDEV: driver for framebuffer: fbdev
[  2846.377] (--) using VT number 7

[  2846.382] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  2846.382] (WW) Falling back to old probe method for vesa
[  2846.382] (WW) Falling back to old probe method for fbdev
[  2846.382] (II) Loading sub module "fbdevhw"
[  2846.382] (II) LoadModule: "fbdevhw"
[  2846.382] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  2846.382] (II) Module fbdevhw: vendor="X.Org Foundation"
[  2846.382]     compiled for 1.10.1, module version = 0.0.2
[  2846.382]     ABI class: X.Org Video Driver, version 10.0
[  2846.382] drmOpenDevice: node name is /dev/dri/card0
[  2846.382] drmOpenDevice: open result is 8, (OK)
[  2846.382] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[  2846.382] drmOpenDevice: node name is /dev/dri/card0
[  2846.382] drmOpenDevice: open result is 8, (OK)
[  2846.382] drmOpenByBusid: drmOpenMinor returns 8
[  2846.382] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[  2846.382] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[  2846.382] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  2846.382] (==) intel(0): RGB weight 888
[  2846.382] (==) intel(0): Default visual is TrueColor
[  2846.382] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge
[  2846.382] (--) intel(0): Chipset: "Sandybridge"
[  2846.382] (**) intel(0): Relaxed fencing enabled
[  2846.382] (**) intel(0): Framebuffer tiled
[  2846.382] (**) intel(0): Pixmaps tiled
[  2846.382] (**) intel(0): 3D buffers tiled
[  2846.382] (**) intel(0): SwapBuffers wait disabled
[  2846.383] (==) intel(0): video overlay key set to 0x101fe
[  2846.383] (II) intel(0): Output LVDS1 has no monitor section
[  2846.383] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[  2846.383] (II) intel(0): Output VGA1 has no monitor section
[  2846.388] (II) intel(0): Output HDMI1 has no monitor section
[  2846.389] (II) intel(0): Output DP1 has no monitor section
[  2846.389] (II) intel(0): EDID for output LVDS1
[  2846.389] (II) intel(0): Manufacturer: AUO  Model: 22ec  Serial#: 0
[  2846.389] (II) intel(0): Year: 2009  Week: 1
[  2846.389] (II) intel(0): EDID Version: 1.3
[  2846.389] (II) intel(0): Digital Display Input
[  2846.389] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[  2846.389] (II) intel(0): Gamma: 2.20
[  2846.389] (II) intel(0): No DPMS capabilities specified
[  2846.389] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  2846.389] (II) intel(0): First detailed timing is preferred mode
[  2846.389] (II) intel(0): redX: 0.620 redY: 0.340   greenX: 0.330 greenY: 0.570
[  2846.389] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[  2846.389] (II) intel(0): Manufacturer's mask: 0
[  2846.389] (II) intel(0): Supported detailed timing:
[  2846.389] (II) intel(0): clock: 65.1 MHz   Image Size:  344 x 193 mm
[  2846.389] (II) intel(0): h_active: 1366  h_sync: 1382  h_sync_end 1390 h_blank_end 1398 h_border: 0
[  2846.389] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 776 v_border: 0
[  2846.389] (II) intel(0): Supported detailed timing:
[  2846.389] (II) intel(0): clock: 65.1 MHz   Image Size:  344 x 193 mm
[  2846.389] (II) intel(0): h_active: 1366  h_sync: 1382  h_sync_end 1390 h_blank_end 1398 h_border: 0
[  2846.389] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 775 v_blanking: 776 v_border: 0
[  2846.389] (II) intel(0):  1JC2NB156XW2
[  2846.389] (II) intel(0): Unknown vendor-specific block 0
[  2846.389] (II) intel(0): EDID (in hex):
[  2846.389] (II) intel(0):     00ffffffffffff0006afec2200000000
[  2846.389] (II) intel(0):     01130103902213780ac8959e57549226
[  2846.389] (II) intel(0):     0f505400000001010101010101010101
[  2846.389] (II) intel(0):     0101010101016e195620500008301008
[  2846.389] (II) intel(0):     340058c11000001a6e19562050000830
[  2846.389] (II) intel(0):     1008340058c11000001a000000fe0031
[  2846.389] (II) intel(0):     4a43324e804231353658573200000000
[  2846.389] (II) intel(0):     00000000000000000001010a202000d4
[  2846.389] (II) intel(0): EDID vendor "AUO", prod id 8940
[  2846.389] (II) intel(0): Printing DDC gathered Modelines:
[  2846.389] (II) intel(0): Modeline "1366x768"x0.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[  2846.389] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[  2846.389] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[  2846.389] (II) intel(0): Printing probed modes for output LVDS1
[  2846.389] (II) intel(0): Modeline "1366x768"x60.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[  2846.389] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  2846.389] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[  2846.389] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[  2846.389] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[  2846.389] (II) intel(0): EDID for output VGA1
[  2846.394] (II) intel(0): EDID for output HDMI1
[  2846.395] (II) intel(0): EDID for output DP1
[  2846.395] (II) intel(0): Output LVDS1 connected
[  2846.395] (II) intel(0): Output VGA1 disconnected
[  2846.395] (II) intel(0): Output HDMI1 disconnected
[  2846.395] (II) intel(0): Output DP1 disconnected
[  2846.395] (II) intel(0): Using exact sizes for initial modes
[  2846.395] (II) intel(0): Output LVDS1 using initial mode 1366x768
[  2846.395] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  2846.395] (II) intel(0): Kernel page flipping support detected, enabling
[  2846.395] (**) intel(0): Display dimensions: (340, 190) mm
[  2846.395] (**) intel(0): DPI set to (102, 102)
[  2846.395] (II) Loading sub module "fb"
[  2846.395] (II) LoadModule: "fb"
[  2846.395] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2846.396] (II) Module fb: vendor="X.Org Foundation"
[  2846.396]     compiled for 1.10.1, module version = 1.0.0
[  2846.396]     ABI class: X.Org ANSI C Emulation, version 0.4
[  2846.396] (II) Loading sub module "dri2"
[  2846.396] (II) LoadModule: "dri2"
[  2846.396] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[  2846.396] (II) Module dri2: vendor="X.Org Foundation"
[  2846.396]     compiled for 1.10.1, module version = 1.2.0
[  2846.396]     ABI class: X.Org Server Extension, version 5.0
[  2846.396] (II) UnloadModule: "vesa"
[  2846.396] (II) Unloading vesa
[  2846.396] (II) UnloadModule: "fbdev"
[  2846.396] (II) Unloading fbdev
[  2846.396] (II) UnloadModule: "fbdevhw"
[  2846.396] (II) Unloading fbdevhw
[  2846.396] (==) Depth 24 pixmap format is 32 bpp
[  2846.396] (II) intel(0): [DRI2] Setup complete
[  2846.396] (II) intel(0): [DRI2]   DRI driver: i965
[  2846.396] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[  2846.397] (II) UXA(0): Driver registered support for the following operations:
[  2846.397] (II)         solid
[  2846.397] (II)         copy
[  2846.397] (II)         composite (RENDER acceleration)
[  2846.397] (II)         put_image
[  2846.397] (II)         get_image
[  2846.397] (==) intel(0): Backing store disabled
[  2846.397] (==) intel(0): Silken mouse enabled
[  2846.397] (II) intel(0): Initializing HW Cursor
[  2846.456] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2846.457] (==) intel(0): DPMS enabled
[  2846.457] (==) intel(0): Intel XvMC decoder enabled
[  2846.457] (II) intel(0): Set up textured video
[  2846.457] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[  2846.457] (II) intel(0): direct rendering: DRI2 Enabled
[  2846.457] (==) intel(0): hotplug detection: "enabled"
[  2846.457] (--) RandR disabled
[  2846.457] (II) Initializing built-in extension Generic Event Extension
[  2846.457] (II) Initializing built-in extension SHAPE
[  2846.457] (II) Initializing built-in extension MIT-SHM
[  2846.457] (II) Initializing built-in extension XInputExtension
[  2846.457] (II) Initializing built-in extension XTEST
[  2846.457] (II) Initializing built-in extension BIG-REQUESTS
[  2846.457] (II) Initializing built-in extension SYNC
[  2846.457] (II) Initializing built-in extension XKEYBOARD
[  2846.457] (II) Initializing built-in extension XC-MISC
[  2846.457] (II) Initializing built-in extension SECURITY
[  2846.457] (II) Initializing built-in extension XINERAMA
[  2846.457] (II) Initializing built-in extension XFIXES
[  2846.457] (II) Initializing built-in extension RENDER
[  2846.457] (II) Initializing built-in extension RANDR
[  2846.457] (II) Initializing built-in extension COMPOSITE
[  2846.457] (II) Initializing built-in extension DAMAGE
[  2846.465] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  2846.465] (II) AIGLX: enabled GLX_INTEL_swap_event
[  2846.465] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[  2846.465] (II) AIGLX: enabled GLX_SGI_make_current_read
[  2846.465] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  2846.465] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[  2846.465] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2846.465] (II) intel(0): Setting screen physical size to 361 x 203
[  2846.508] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[  2846.508] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2846.509] (II) LoadModule: "evdev"
[  2846.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2846.509] (II) Module evdev: vendor="X.Org Foundation"
[  2846.509]     compiled for 1.10.0, module version = 2.6.0
[  2846.509]     Module class: X.Org XInput Driver
[  2846.509]     ABI class: X.Org XInput driver, version 12.2
[  2846.509] (II) Using input driver 'evdev' for 'Power Button'
[  2846.509] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2846.509] (**) Power Button: always reports core events
[  2846.509] (**) Power Button: Device: "/dev/input/event4"
[  2846.529] (--) Power Button: Found keys
[  2846.529] (II) Power Button: Configuring as keyboard
[  2846.529] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[  2846.529] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  2846.529] (**) Option "xkb_rules" "evdev"
[  2846.529] (**) Option "xkb_model" "evdev"
[  2846.529] (**) Option "xkb_layout" "us"
[  2846.653] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[  2846.653] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2846.653] (II) Using input driver 'evdev' for 'Video Bus'
[  2846.653] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2846.653] (**) Video Bus: always reports core events
[  2846.653] (**) Video Bus: Device: "/dev/input/event6"
[  2846.669] (--) Video Bus: Found keys
[  2846.669] (II) Video Bus: Configuring as keyboard
[  2846.669] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input6/event6"
[  2846.669] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[  2846.669] (**) Option "xkb_rules" "evdev"
[  2846.669] (**) Option "xkb_model" "evdev"
[  2846.669] (**) Option "xkb_layout" "us"
[  2846.672] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[  2846.672] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  2846.672] (II) Using input driver 'evdev' for 'Video Bus'
[  2846.672] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2846.672] (**) Video Bus: always reports core events
[  2846.672] (**) Video Bus: Device: "/dev/input/event5"
[  2846.699] (--) Video Bus: Found keys
[  2846.699] (II) Video Bus: Configuring as keyboard
[  2846.699] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:33/LNXVIDEO:00/input/input5/event5"
[  2846.699] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[  2846.699] (**) Option "xkb_rules" "evdev"
[  2846.699] (**) Option "xkb_model" "evdev"
[  2846.699] (**) Option "xkb_layout" "us"
[  2846.706] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  2846.706] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  2846.706] (II) Using input driver 'evdev' for 'Power Button'
[  2846.706] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2846.706] (**) Power Button: always reports core events
[  2846.706] (**) Power Button: Device: "/dev/input/event1"
[  2846.729] (--) Power Button: Found keys
[  2846.729] (II) Power Button: Configuring as keyboard
[  2846.729] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[  2846.729] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[  2846.729] (**) Option "xkb_rules" "evdev"
[  2846.729] (**) Option "xkb_model" "evdev"
[  2846.729] (**) Option "xkb_layout" "us"
[  2846.730] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[  2846.730] (II) No input driver/identifier specified (ignoring)
[  2846.730] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[  2846.730] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  2846.730] (II) Using input driver 'evdev' for 'Sleep Button'
[  2846.730] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2846.730] (**) Sleep Button: always reports core events
[  2846.730] (**) Sleep Button: Device: "/dev/input/event2"
[  2846.746] (--) Sleep Button: Found keys
[  2846.746] (II) Sleep Button: Configuring as keyboard
[  2846.746] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[  2846.746] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[  2846.746] (**) Option "xkb_rules" "evdev"
[  2846.746] (**) Option "xkb_model" "evdev"
[  2846.746] (**) Option "xkb_layout" "us"
[  2846.749] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event13)
[  2846.749] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[  2846.749] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[  2846.749] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2846.749] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[  2846.749] (**) Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event13"
[  2846.763] (--) Laptop_Integrated_Webcam_2HDM: Found keys
[  2846.763] (II) Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[  2846.763] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input13/event13"
[  2846.763] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD)
[  2846.763] (**) Option "xkb_rules" "evdev"
[  2846.763] (**) Option "xkb_model" "evdev"
[  2846.763] (**) Option "xkb_layout" "us"
[  2846.763] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[  2846.763] (II) No input driver/identifier specified (ignoring)
[  2846.764] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event10)
[  2846.764] (II) No input driver/identifier specified (ignoring)
[  2846.764] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[  2846.764] (II) No input driver/identifier specified (ignoring)
[  2846.766] (II) config/udev: Adding input device Mitsumi Optical Wheel Mouse (USB) (/dev/input/event12)
[  2846.766] (**) Mitsumi Optical Wheel Mouse (USB): Applying InputClass "evdev pointer catchall"
[  2846.766] (II) Using input driver 'evdev' for 'Mitsumi Optical Wheel Mouse (USB)'
[  2846.766] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2846.766] (**) Mitsumi Optical Wheel Mouse (USB): always reports core events
[  2846.766] (**) Mitsumi Optical Wheel Mouse (USB): Device: "/dev/input/event12"
[  2846.793] (--) Mitsumi Optical Wheel Mouse (USB): Found 3 mouse buttons
[  2846.793] (--) Mitsumi Optical Wheel Mouse (USB): Found scroll wheel(s)
[  2846.793] (--) Mitsumi Optical Wheel Mouse (USB): Found relative axes
[  2846.793] (--) Mitsumi Optical Wheel Mouse (USB): Found x and y relative axes
[  2846.793] (II) Mitsumi Optical Wheel Mouse (USB): Configuring as mouse
[  2846.793] (II) Mitsumi Optical Wheel Mouse (USB): Adding scrollwheel support
[  2846.793] (**) Mitsumi Optical Wheel Mouse (USB): YAxisMapping: buttons 4 and 5
[  2846.793] (**) Mitsumi Optical Wheel Mouse (USB): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  2846.793] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input12/event12"
[  2846.793] (II) XINPUT: Adding extended input device "Mitsumi Optical Wheel Mouse (USB)" (type: MOUSE)
[  2846.793] (II) Mitsumi Optical Wheel Mouse (USB): initialized for relative axes.
[  2846.793] (**) Mitsumi Optical Wheel Mouse (USB): (accel) keeping acceleration scheme 1
[  2846.793] (**) Mitsumi Optical Wheel Mouse (USB): (accel) acceleration profile 0
[  2846.793] (**) Mitsumi Optical Wheel Mouse (USB): (accel) acceleration factor: 2.000
[  2846.793] (**) Mitsumi Optical Wheel Mouse (USB): (accel) acceleration threshold: 4
[  2846.793] (II) config/udev: Adding input device Mitsumi Optical Wheel Mouse (USB) (/dev/input/mouse1)
[  2846.793] (II) No input driver/identifier specified (ignoring)
[  2846.797] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  2846.797] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  2846.797] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  2846.797] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2846.797] (**) AT Translated Set 2 keyboard: always reports core events
[  2846.797] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  2846.823] (--) AT Translated Set 2 keyboard: Found keys
[  2846.823] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[  2846.823] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  2846.823] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[  2846.823] (**) Option "xkb_rules" "evdev"
[  2846.823] (**) Option "xkb_model" "evdev"
[  2846.823] (**) Option "xkb_layout" "us"
[  2846.823] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[  2846.823] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  2846.823] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  2846.823] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  2846.823] (II) LoadModule: "synaptics"
[  2846.823] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  2846.823] (II) Module synaptics: vendor="X.Org Foundation"
[  2846.823]     compiled for 1.10.0, module version = 1.4.0
[  2846.823]     Module class: X.Org XInput Driver
[  2846.823]     ABI class: X.Org XInput driver, version 12.2
[  2846.823] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  2846.823] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  2846.823] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  2846.824] (**) Option "Device" "/dev/input/event9"
[  2846.906] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5398
[  2846.906] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728
[  2846.906] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  2846.906] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  2846.906] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[  2846.906] (**) Option "VertEdgeScroll" "on"
[  2846.906] (**) Option "HorizEdgeScroll" "off"
[  2846.906] (**) Option "VertTwoFingerScroll" "off"
[  2846.906] (**) Option "HorizTwoFingerScroll" "off"
[  2846.906] (**) Option "TapButton1" "0"
[  2846.906] (**) Option "TapButton2" "2"
[  2846.906] (**) Option "TapButton3" "3"
[  2846.906] (**) Option "CircularScrolling" "off"
[  2846.973] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  2846.973] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  2847.006] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[  2847.006] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[  2847.006] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  2847.006] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[  2847.006] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.039
[  2847.006] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  2847.006] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  2847.006] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  2847.006] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  2847.056] (--) SynPS/2 Synaptics TouchPad: touchpad found
[  2847.056] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  2847.056] (II) No input driver/identifier specified (ignoring)
[  2847.057] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[  2847.057] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  2847.057] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[  2847.057] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  2847.058] (**) Dell WMI hotkeys: always reports core events
[  2847.058] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
[  2847.073] (--) Dell WMI hotkeys: Found keys
[  2847.073] (II) Dell WMI hotkeys: Configuring as keyboard
[  2847.073] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[  2847.073] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[  2847.073] (**) Option "xkb_rules" "evdev"
[  2847.073] (**) Option "xkb_model" "evdev"
[  2847.073] (**) Option "xkb_layout" "us"
[  2848.310] (II) intel(0): EDID vendor "AUO", prod id 8940
[  2848.310] (II) intel(0): Printing DDC gathered Modelines:
[  2848.310] (II) intel(0): Modeline "1366x768"x0.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[  2853.452] (II) intel(0): EDID vendor "AUO", prod id 8940
[  2853.452] (II) intel(0): Printing DDC gathered Modelines:
[  2853.452] (II) intel(0): Modeline "1366x768"x0.0   65.10  1366 1382 1390 1398  768 771 775 776 +hsync -vsync (46.6 kHz)
[  4559.522] 
Backtrace:
[  4559.522] 0: /usr/bin/X (xorg_backtrace+0x28) [0x49f598]
[  4559.522] 1: /usr/bin/X (0x400000+0x603b9) [0x4603b9]
[  4559.522] 2: /lib/libpthread.so.0 (0x7f32e6201000+0xf750) [0x7f32e6210750]
[  4559.522] 3: /usr/lib/xorg/modules/dri/i965_dri.so (0x7f32e25c7000+0x43710) [0x7f32e260a710]
[  4559.522] 4: /usr/lib/xorg/modules/dri/i965_dri.so (0x7f32e25c7000+0x3ab1a) [0x7f32e2601b1a]
[  4559.522] 5: /usr/lib/xorg/modules/dri/i965_dri.so (0x7f32e25c7000+0x3d0fa) [0x7f32e26040fa]
[  4559.523] 6: /usr/lib/xorg/modules/extensions/libglx.so (0x7f32e400c000+0x3633c) [0x7f32e404233c]
[  4559.523] 7: /usr/lib/xorg/modules/extensions/libglx.so (0x7f32e400c000+0x389f3) [0x7f32e40449f3]
[  4559.523] 8: /usr/bin/X (0x400000+0x2d341) [0x42d341]
[  4559.523] 9: /usr/bin/X (0x400000+0x213ee) [0x4213ee]
[  4559.523] 10: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f32e5187f6d]
[  4559.523] 11: /usr/bin/X (0x400000+0x20f99) [0x420f99]
[  4559.523] Segmentation fault at address 0x40
[  4559.523] 
Fatal server error:
[  4559.523] Caught signal 11 (Segmentation fault). Server aborting
[  4559.523] 
[  4559.523] 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[  4559.523] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  4559.523] 
[  4559.572] (II) Power Button: Close
[  4559.573] (II) UnloadModule: "evdev"
[  4559.573] (II) Unloading evdev
[  4559.606] (II) Video Bus: Close
[  4559.606] (II) UnloadModule: "evdev"
[  4559.606] (II) Unloading evdev
[  4559.642] (II) Video Bus: Close
[  4559.642] (II) UnloadModule: "evdev"
[  4559.642] (II) Unloading evdev
[  4559.689] (II) Power Button: Close
[  4559.689] (II) UnloadModule: "evdev"
[  4559.689] (II) Unloading evdev
[  4559.722] (II) Sleep Button: Close
[  4559.722] (II) UnloadModule: "evdev"
[  4559.722] (II) Unloading evdev
[  4559.769] (II) Laptop_Integrated_Webcam_2HDM: Close
[  4559.769] (II) UnloadModule: "evdev"
[  4559.769] (II) Unloading evdev
[  4559.839] (II) Mitsumi Optical Wheel Mouse (USB): Close
[  4559.839] (II) UnloadModule: "evdev"
[  4559.839] (II) Unloading evdev
[  4559.882] (II) AT Translated Set 2 keyboard: Close
[  4559.882] (II) UnloadModule: "evdev"
[  4559.883] (II) Unloading evdev
[  4559.973] (II) UnloadModule: "synaptics"
[  4559.973] (II) Unloading synaptics
[  4560.006] (II) Dell WMI hotkeys: Close
[  4560.006] (II) UnloadModule: "evdev"
[  4560.006] (II) Unloading evdev
[  4560.006] (II) AIGLX: Suspending AIGLX clients for VT switch

smudge · 2011-04-25 21:31:50

Edo wrote:

Fairly sure it's running in 64-bit native

Hi, ET and TCE are both 32bit only so make sure you have any 32bit libs they need. You can check what they need with ldd but since you're having other crashes this may not help.

Edo · 2011-04-27 10:42:41

Thanks for the advice smudge. I decided to give Quake 3 a go today so got ioquake3 from AUR and that runs perfectly, sooo guess I'm not having any problems with DRI or 3D stuff, just the Enemy Territory build. Hmm.

Jodell · 2011-04-27 20:43:02

I also have the same problem. No Idea on how to fixed it

smudge · 2011-04-27 23:10:07

I can only suggest you both find the file et.x86 and in a terminal type:

ldd et.x86

and see if you get any "not found" messages.

Jodell · 2011-04-30 01:26:54

Running ldd on et.x86 gives me this.

[nicholas@coldsteel ~]$ ldd /opt/enemy-territory/et.x86
    linux-gate.so.1 =>  (0xf7746000)
    libdl.so.2 => /usr/lib32/libdl.so.2 (0xf771d000)
    libX11.so.6 => /usr/lib32/libX11.so.6 (0xf7601000)
    libXext.so.6 => /usr/lib32/libXext.so.6 (0xf75f3000)
    libm.so.6 => /usr/lib32/libm.so.6 (0xf75c9000)
    libc.so.6 => /usr/lib32/libc.so.6 (0xf7463000)
    /lib/ld-linux.so.2 (0xf7747000)
    libxcb.so.1 => /usr/lib32/libxcb.so.1 (0xf744b000)
    libXau.so.6 => /usr/lib32/libXau.so.6 (0xf7448000)
    libXdmcp.so.6 => /usr/lib32/libXdmcp.so.6 (0xf7443000)

It looks like all the dependencies are met.

Arch Linux

#1 2011-04-24 15:39:25

Segfault on quake3 engine games

#2 2011-04-25 10:45:03

Re: Segfault on quake3 engine games

#3 2011-04-25 21:31:50

Re: Segfault on quake3 engine games

#4 2011-04-27 10:42:41

Re: Segfault on quake3 engine games

#5 2011-04-27 20:43:02

Re: Segfault on quake3 engine games

#6 2011-04-27 23:10:07

Re: Segfault on quake3 engine games

#7 2011-04-30 01:26:54

Re: Segfault on quake3 engine games

Board footer