You are not logged in.

#1 2011-05-16 16:37:14

djidji
Member
Registered: 2007-02-26
Posts: 57

external monitor shifted to the right

i just got an external monitor (acer v223W) which support max resolution of 1680x1050. but when i try and use xrandr like:

xrandr --output LVDS1 --mode 1440x900 --output VGA1 --mode 1680x1050 --right-of LVDS1

what i see is shifted by about 100px or so to the left. so on my right had side i have a black bar and when i move a window from my external monitor to my laptop i can tell that the window disappears for a bit before staring to show up on my laptop. before i had a different monitor with max resolution of 1600x900 and xrandr worked great.

here is the info that i gathered:

- my laptop is (almost) up to date on all software
- it has two video cards: intel (which is the one i use) and nvidea (i disabled it in bios).
- i have intel video drivers installed:

: pacman -Qs intel
local/intel-dri 7.10.2-2
    Mesa DRI drivers for Intel
local/xf86-video-intel 2.15.0-1 (xorg-drivers xorg)
    X.org Intel i810/i830/i915/945G/G965+ video drivers

- here is what xrandr says

: xrandr -q
Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192
LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 304mm x 190mm
   1440x900       60.3*+   50.1  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 connected 1680x1050+1440+0 (normal left inverted right x axis y axis) 473mm x 296mm
   1680x1050      60.0*+
   1600x1200      60.0  
   1280x1024      75.0     60.0  
   1440x900       75.0     59.9  
   1280x800       59.8  
   1152x864       75.0  
   1024x768       75.1     70.1     60.0  
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   640x480        72.8     75.0     66.7     60.0  
   720x400        70.1  
DP1 disconnected (normal left inverted right x axis y axis)

- here is the Xorg log

: cat /var/log/Xorg.0.log
[   120.021] 
X.Org X Server 1.10.1
Release Date: 2011-04-15
[   120.021] X Protocol Version 11, Revision 0
[   120.021] Build Operating System: Linux 2.6.38-ARCH x86_64 
[   120.021] Current Operating System: Linux jss-lenovo-105 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 20:29:33 CEST 2011 x86_64
[   120.021] Kernel command line: root=/dev/disk/by-uuid/ad7e26d2-8144-4d4c-9c60-df4f7fcceda7 ro
[   120.021] Build Date: 16 April 2011  12:02:01PM
[   120.021]  
[   120.021] Current version of pixman: 0.20.2
[   120.021]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   120.021] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   120.022] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 16 11:44:46 2011
[   120.111] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   120.130] (==) No Layout section.  Using the first Screen section.
[   120.130] (==) No screen section available. Using defaults.
[   120.130] (**) |-->Screen "Default Screen Section" (0)
[   120.130] (**) |   |-->Monitor "<default monitor>"
[   120.130] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   120.130] (==) Automatically adding devices
[   120.130] (==) Automatically enabling devices
[   120.180] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   120.180]     Entry deleted from font path.
[   120.213] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
[   120.213] (==) ModulePath set to "/usr/lib/xorg/modules"
[   120.213] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   120.213] (II) Loader magic: 0x7d6fa0
[   120.213] (II) Module ABI versions:
[   120.213]     X.Org ANSI C Emulation: 0.4
[   120.213]     X.Org Video Driver: 10.0
[   120.213]     X.Org XInput driver : 12.2
[   120.213]     X.Org Server Extension : 5.0
[   120.214] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:2112 rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[   120.214] (--) PCI: (0:0:2:1) 8086:2a43:17aa:2112 rev 7, Mem @ 0xf4200000/1048576
[   120.215] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   120.215] (II) LoadModule: "extmod"
[   120.229] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   120.235] (II) Module extmod: vendor="X.Org Foundation"
[   120.235]     compiled for 1.10.1, module version = 1.0.0
[   120.235]     Module class: X.Org Server Extension
[   120.235]     ABI class: X.Org Server Extension, version 5.0
[   120.235] (II) Loading extension MIT-SCREEN-SAVER
[   120.235] (II) Loading extension XFree86-VidModeExtension
[   120.235] (II) Loading extension XFree86-DGA
[   120.235] (II) Loading extension DPMS
[   120.235] (II) Loading extension XVideo
[   120.235] (II) Loading extension XVideo-MotionCompensation
[   120.235] (II) Loading extension X-Resource
[   120.235] (II) LoadModule: "dbe"
[   120.236] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   120.236] (II) Module dbe: vendor="X.Org Foundation"
[   120.236]     compiled for 1.10.1, module version = 1.0.0
[   120.236]     Module class: X.Org Server Extension
[   120.236]     ABI class: X.Org Server Extension, version 5.0
[   120.236] (II) Loading extension DOUBLE-BUFFER
[   120.236] (II) LoadModule: "glx"
[   120.236] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   120.247] (II) Module glx: vendor="X.Org Foundation"
[   120.247]     compiled for 1.10.1, module version = 1.0.0
[   120.247]     ABI class: X.Org Server Extension, version 5.0
[   120.247] (==) AIGLX enabled
[   120.247] (II) Loading extension GLX
[   120.250] (II) LoadModule: "record"
[   120.250] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   120.250] (II) Module record: vendor="X.Org Foundation"
[   120.250]     compiled for 1.10.1, module version = 1.13.0
[   120.250]     Module class: X.Org Server Extension
[   120.250]     ABI class: X.Org Server Extension, version 5.0
[   120.251] (II) Loading extension RECORD
[   120.251] (II) LoadModule: "dri"
[   120.251] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   120.269] (II) Module dri: vendor="X.Org Foundation"
[   120.269]     compiled for 1.10.1, module version = 1.0.0
[   120.269]     ABI class: X.Org Server Extension, version 5.0
[   120.269] (II) Loading extension XFree86-DRI
[   120.269] (II) LoadModule: "dri2"
[   120.269] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   120.270] (II) Module dri2: vendor="X.Org Foundation"
[   120.270]     compiled for 1.10.1, module version = 1.2.0
[   120.270]     ABI class: X.Org Server Extension, version 5.0
[   120.270] (II) Loading extension DRI2
[   120.270] (==) Matched intel as autoconfigured driver 0
[   120.270] (==) Matched vesa as autoconfigured driver 1
[   120.270] (==) Matched fbdev as autoconfigured driver 2
[   120.270] (==) Assigned the driver to the xf86ConfigLayout
[   120.270] (II) LoadModule: "intel"
[   120.279] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   120.299] (II) Module intel: vendor="X.Org Foundation"
[   120.299]     compiled for 1.10.0.902, module version = 2.15.0
[   120.299]     Module class: X.Org Video Driver
[   120.299]     ABI class: X.Org Video Driver, version 10.0
[   120.299] (II) LoadModule: "vesa"
[   120.299] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   120.300] (II) Module vesa: vendor="X.Org Foundation"
[   120.300]     compiled for 1.10.0, module version = 2.3.0
[   120.300]     Module class: X.Org Video Driver
[   120.300]     ABI class: X.Org Video Driver, version 10.0
[   120.300] (II) LoadModule: "fbdev"
[   120.309] (WW) Warning, couldn't open module fbdev
[   120.309] (II) UnloadModule: "fbdev"
[   120.309] (II) Unloading fbdev
[   120.309] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   120.309] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
[   120.309] (II) VESA: driver for VESA chipsets: vesa
[   120.309] (--) using VT number 7

[   120.313] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   120.313] (WW) Falling back to old probe method for vesa
[   120.314] drmOpenDevice: node name is /dev/dri/card0
[   120.314] drmOpenDevice: open result is 8, (OK)
[   120.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   120.314] drmOpenDevice: node name is /dev/dri/card0
[   120.314] drmOpenDevice: open result is 8, (OK)
[   120.314] drmOpenByBusid: drmOpenMinor returns 8
[   120.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   120.314] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   120.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   120.314] (==) intel(0): RGB weight 888
[   120.314] (==) intel(0): Default visual is TrueColor
[   120.314] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[   120.314] (--) intel(0): Chipset: "GM45"
[   120.314] (**) intel(0): Relaxed fencing enabled
[   120.314] (**) intel(0): Framebuffer tiled
[   120.314] (**) intel(0): Pixmaps tiled
[   120.314] (**) intel(0): 3D buffers tiled
[   120.314] (**) intel(0): SwapBuffers wait enabled
[   120.314] (==) intel(0): video overlay key set to 0x101fe
[   120.327] (II) intel(0): Output LVDS1 has no monitor section
[   120.328] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   120.346] (II) intel(0): Output VGA1 has no monitor section
[   120.347] (II) intel(0): Output DP1 has no monitor section
[   120.347] (II) intel(0): EDID for output LVDS1
[   120.347] (II) intel(0): Manufacturer: LEN  Model: 4033  Serial#: 0
[   120.347] (II) intel(0): Year: 2007  Week: 0
[   120.347] (II) intel(0): EDID Version: 1.3
[   120.347] (II) intel(0): Digital Display Input
[   120.347] (II) intel(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[   120.347] (II) intel(0): Gamma: 2.20
[   120.347] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[   120.347] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   120.347] (II) intel(0): First detailed timing is preferred mode
[   120.348] (II) intel(0): redX: 0.590 redY: 0.330   greenX: 0.310 greenY: 0.570
[   120.348] (II) intel(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
[   120.348] (II) intel(0): Manufacturer's mask: 0
[   120.348] (II) intel(0): Supported detailed timing:
[   120.348] (II) intel(0): clock: 100.0 MHz   Image Size:  304 x 190 mm
[   120.348] (II) intel(0): h_active: 1440  h_sync: 1488  h_sync_end 1520 h_blank_end 1800 h_border: 0
[   120.348] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 907 v_blanking: 922 v_border: 0
[   120.348] (II) intel(0): Supported detailed timing:
[   120.348] (II) intel(0): clock: 82.0 MHz   Image Size:  304 x 190 mm
[   120.348] (II) intel(0): h_active: 1440  h_sync: 1488  h_sync_end 1520 h_blank_end 1768 h_border: 0
[   120.348] (II) intel(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 926 v_border: 0
[   120.348] (II) intel(0): Unknown vendor-specific block f
[   120.348] (II) intel(0):  AUOB141PW03V0
[   120.348] (II) intel(0): EDID (in hex):
[   120.348] (II) intel(0):     00ffffffffffff0030ae334000000000
[   120.348] (II) intel(0):     00110103801e1378ea24e597544f9227
[   120.348] (II) intel(0):     22505400000001010101010101010101
[   120.348] (II) intel(0):     0101010101011027a068518416303020
[   120.348] (II) intel(0):     340030be100000180320a04851841a30
[   120.348] (II) intel(0):     3020360030be100000180000000f0095
[   120.348] (II) intel(0):     0a32950a2814010006af5125000000fe
[   120.348] (II) intel(0):     0041554f4231343150573033563000cf
[   120.348] (II) intel(0): EDID vendor "LEN", prod id 16435
[   120.348] (II) intel(0): Printing DDC gathered Modelines:
[   120.348] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   120.348] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   120.348] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   120.348] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   120.348] (II) intel(0): Printing probed modes for output LVDS1
[   120.348] (II) intel(0): Modeline "1440x900"x60.3  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   120.348] (II) intel(0): Modeline "1440x900"x50.1   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   120.348] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   120.348] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   120.348] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   120.348] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   120.366] (II) intel(0): EDID for output VGA1
[   120.367] (II) intel(0): EDID for output DP1
[   120.367] (II) intel(0): Output LVDS1 connected
[   120.367] (II) intel(0): Output VGA1 disconnected
[   120.367] (II) intel(0): Output DP1 disconnected
[   120.367] (II) intel(0): Using exact sizes for initial modes
[   120.367] (II) intel(0): Output LVDS1 using initial mode 1440x900
[   120.367] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   120.367] (II) intel(0): Kernel page flipping support detected, enabling
[   120.367] (**) intel(0): Display dimensions: (300, 190) mm
[   120.367] (**) intel(0): DPI set to (121, 120)
[   120.367] (II) Loading sub module "fb"
[   120.367] (II) LoadModule: "fb"
[   120.368] (II) Loading /usr/lib/xorg/modules/libfb.so
[   120.396] (II) Module fb: vendor="X.Org Foundation"
[   120.396]     compiled for 1.10.1, module version = 1.0.0
[   120.396]     ABI class: X.Org ANSI C Emulation, version 0.4
[   120.396] (II) Loading sub module "dri2"
[   120.396] (II) LoadModule: "dri2"
[   120.396] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   120.396] (II) Module dri2: vendor="X.Org Foundation"
[   120.397]     compiled for 1.10.1, module version = 1.2.0
[   120.397]     ABI class: X.Org Server Extension, version 5.0
[   120.397] (II) UnloadModule: "vesa"
[   120.397] (II) Unloading vesa
[   120.397] (==) Depth 24 pixmap format is 32 bpp
[   120.397] (II) intel(0): [DRI2] Setup complete
[   120.397] (II) intel(0): [DRI2]   DRI driver: i965
[   120.397] (II) intel(0): Allocated new frame buffer 1472x900 stride 6144, tiled
[   120.473] (II) UXA(0): Driver registered support for the following operations:
[   120.473] (II)         solid
[   120.473] (II)         copy
[   120.473] (II)         composite (RENDER acceleration)
[   120.473] (II)         put_image
[   120.473] (II)         get_image
[   120.473] (==) intel(0): Backing store disabled
[   120.473] (==) intel(0): Silken mouse enabled
[   120.484] (II) intel(0): Initializing HW Cursor
[   120.540] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   120.542] (==) intel(0): DPMS enabled
[   120.542] (==) intel(0): Intel XvMC decoder enabled
[   120.542] (II) intel(0): Set up textured video
[   120.542] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   120.542] (II) intel(0): direct rendering: DRI2 Enabled
[   120.542] (==) intel(0): hotplug detection: "enabled"
[   120.542] (--) RandR disabled
[   120.542] (II) Initializing built-in extension Generic Event Extension
[   120.542] (II) Initializing built-in extension SHAPE
[   120.542] (II) Initializing built-in extension MIT-SHM
[   120.542] (II) Initializing built-in extension XInputExtension
[   120.542] (II) Initializing built-in extension XTEST
[   120.542] (II) Initializing built-in extension BIG-REQUESTS
[   120.542] (II) Initializing built-in extension SYNC
[   120.542] (II) Initializing built-in extension XKEYBOARD
[   120.542] (II) Initializing built-in extension XC-MISC
[   120.542] (II) Initializing built-in extension SECURITY
[   120.542] (II) Initializing built-in extension XINERAMA
[   120.542] (II) Initializing built-in extension XFIXES
[   120.542] (II) Initializing built-in extension RENDER
[   120.542] (II) Initializing built-in extension RANDR
[   120.542] (II) Initializing built-in extension COMPOSITE
[   120.542] (II) Initializing built-in extension DAMAGE
[   120.707] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   120.707] (II) AIGLX: enabled GLX_INTEL_swap_event
[   120.707] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   120.707] (II) AIGLX: enabled GLX_SGI_make_current_read
[   120.707] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   120.707] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[   120.707] (II) GLX: Initialized DRI2 GL provider for screen 0
[   120.708] (II) intel(0): Setting screen physical size to 381 x 238
[   121.043] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   121.043] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   121.043] (II) LoadModule: "evdev"
[   121.043] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.049] (II) Module evdev: vendor="X.Org Foundation"
[   121.049]     compiled for 1.10.0, module version = 2.6.0
[   121.049]     Module class: X.Org XInput Driver
[   121.049]     ABI class: X.Org XInput driver, version 12.2
[   121.049] (II) Using input driver 'evdev' for 'Power Button'
[   121.049] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.049] (**) Power Button: always reports core events
[   121.049] (**) Power Button: Device: "/dev/input/event4"
[   121.063] (--) Power Button: Found keys
[   121.063] (II) Power Button: Configuring as keyboard
[   121.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[   121.063] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[   121.063] (**) Option "xkb_rules" "evdev"
[   121.063] (**) Option "xkb_model" "evdev"
[   121.063] (**) Option "xkb_layout" "us"
[   121.086] (II) config/udev: Adding input device Video Bus (/dev/input/event16)
[   121.086] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   121.086] (II) Using input driver 'evdev' for 'Video Bus'
[   121.086] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.086] (**) Video Bus: always reports core events
[   121.086] (**) Video Bus: Device: "/dev/input/event16"
[   121.100] (--) Video Bus: Found keys
[   121.100] (II) Video Bus: Configuring as keyboard
[   121.100] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input16/event16"
[   121.100] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[   121.100] (**) Option "xkb_rules" "evdev"
[   121.100] (**) Option "xkb_model" "evdev"
[   121.100] (**) Option "xkb_layout" "us"
[   121.106] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[   121.106] (II) No input driver/identifier specified (ignoring)
[   121.106] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[   121.106] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   121.106] (II) Using input driver 'evdev' for 'Sleep Button'
[   121.106] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.106] (**) Sleep Button: always reports core events
[   121.106] (**) Sleep Button: Device: "/dev/input/event3"
[   121.116] (--) Sleep Button: Found keys
[   121.116] (II) Sleep Button: Configuring as keyboard
[   121.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[   121.116] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[   121.116] (**) Option "xkb_rules" "evdev"
[   121.116] (**) Option "xkb_model" "evdev"
[   121.116] (**) Option "xkb_layout" "us"
[   121.120] (II) config/udev: Adding input device Integrated Camera (/dev/input/event15)
[   121.120] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[   121.120] (II) Using input driver 'evdev' for 'Integrated Camera'
[   121.120] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.120] (**) Integrated Camera: always reports core events
[   121.120] (**) Integrated Camera: Device: "/dev/input/event15"
[   121.146] (--) Integrated Camera: Found keys
[   121.146] (II) Integrated Camera: Configuring as keyboard
[   121.146] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input15/event15"
[   121.146] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[   121.146] (**) Option "xkb_rules" "evdev"
[   121.146] (**) Option "xkb_model" "evdev"
[   121.146] (**) Option "xkb_layout" "us"
[   121.147] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[   121.147] (II) No input driver/identifier specified (ignoring)
[   121.148] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[   121.148] (II) No input driver/identifier specified (ignoring)
[   121.148] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[   121.148] (II) No input driver/identifier specified (ignoring)
[   121.148] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[   121.148] (II) No input driver/identifier specified (ignoring)
[   121.148] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event9)
[   121.148] (II) No input driver/identifier specified (ignoring)
[   121.150] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/event12)
[   121.150] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[   121.150] (II) Using input driver 'evdev' for 'Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)'
[   121.150] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.150] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): always reports core events
[   121.150] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Device: "/dev/input/event12"
[   121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found 3 mouse buttons
[   121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[   121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found relative axes
[   121.173] (--) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Found x and y relative axes
[   121.173] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Configuring as mouse
[   121.173] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[   121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[   121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   121.173] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input12/event12"
[   121.173] (II) XINPUT: Adding extended input device "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" (type: MOUSE)
[   121.173] (II) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): initialized for relative axes.
[   121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[   121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[   121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[   121.173] (**) Microsoft Microsoft 3-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[   121.174] (II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) (/dev/input/mouse1)
[   121.174] (II) No input driver/identifier specified (ignoring)
[   121.174] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event13)
[   121.174] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[   121.174] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[   121.174] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.174] (**) USB-compliant keyboard: always reports core events
[   121.174] (**) USB-compliant keyboard: Device: "/dev/input/event13"
[   121.193] (--) USB-compliant keyboard: Found keys
[   121.193] (II) USB-compliant keyboard: Configuring as keyboard
[   121.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input13/event13"
[   121.193] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[   121.193] (**) Option "xkb_rules" "evdev"
[   121.193] (**) Option "xkb_model" "evdev"
[   121.193] (**) Option "xkb_layout" "us"
[   121.194] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/event14)
[   121.194] (**) USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[   121.194] (II) Using input driver 'evdev' for 'USB-compliant keyboard'
[   121.194] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.194] (**) USB-compliant keyboard: always reports core events
[   121.194] (**) USB-compliant keyboard: Device: "/dev/input/event14"
[   121.220] (--) USB-compliant keyboard: Found 1 mouse buttons
[   121.220] (--) USB-compliant keyboard: Found scroll wheel(s)
[   121.220] (--) USB-compliant keyboard: Found relative axes
[   121.220] (--) USB-compliant keyboard: Found x and y relative axes
[   121.220] (--) USB-compliant keyboard: Found absolute axes
[   121.220] (--) USB-compliant keyboard: Found keys
[   121.220] (II) USB-compliant keyboard: Configuring as mouse
[   121.220] (II) USB-compliant keyboard: Configuring as keyboard
[   121.220] (II) USB-compliant keyboard: Adding scrollwheel support
[   121.220] (**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[   121.220] (**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   121.220] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input14/event14"
[   121.220] (II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
[   121.220] (**) Option "xkb_rules" "evdev"
[   121.220] (**) Option "xkb_model" "evdev"
[   121.220] (**) Option "xkb_layout" "us"
[   121.220] (II) USB-compliant keyboard: initialized for relative axes.
[   121.220] (WW) USB-compliant keyboard: ignoring absolute axes.
[   121.220] (**) USB-compliant keyboard: (accel) keeping acceleration scheme 1
[   121.220] (**) USB-compliant keyboard: (accel) acceleration profile 0
[   121.220] (**) USB-compliant keyboard: (accel) acceleration factor: 2.000
[   121.220] (**) USB-compliant keyboard: (accel) acceleration threshold: 4
[   121.220] (II) config/udev: Adding input device USB-compliant keyboard (/dev/input/mouse2)
[   121.220] (II) No input driver/identifier specified (ignoring)
[   121.224] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   121.224] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   121.224] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   121.224] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.224] (**) AT Translated Set 2 keyboard: always reports core events
[   121.224] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   121.246] (--) AT Translated Set 2 keyboard: Found keys
[   121.246] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   121.246] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   121.246] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[   121.246] (**) Option "xkb_rules" "evdev"
[   121.246] (**) Option "xkb_model" "evdev"
[   121.246] (**) Option "xkb_layout" "us"
[   121.247] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[   121.247] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   121.247] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   121.247] (II) LoadModule: "synaptics"
[   121.247] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   121.248] (II) Module synaptics: vendor="X.Org Foundation"
[   121.248]     compiled for 1.10.0, module version = 1.4.0
[   121.248]     Module class: X.Org XInput Driver
[   121.248]     ABI class: X.Org XInput driver, version 12.2
[   121.248] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   121.248] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   121.248] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   121.248] (**) Option "Device" "/dev/input/event11"
[   121.373] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5598
[   121.373] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4670
[   121.373] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   121.373] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   121.373] (--) SynPS/2 Synaptics TouchPad: buttons: left right
[   121.373] (**) Option "TapButton1" "1"
[   121.373] (**) Option "TapButton2" "2"
[   121.373] (**) Option "TapButton3" "3"
[   121.480] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   121.480] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   121.533] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[   121.533] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[   121.533] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   121.533] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   121.533] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.038
[   121.533] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   121.533] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   121.533] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   121.533] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   121.613] (--) SynPS/2 Synaptics TouchPad: touchpad found
[   121.613] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   121.613] (II) No input driver/identifier specified (ignoring)
[   121.614] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event17)
[   121.614] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[   121.614] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[   121.614] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.614] (**) TPPS/2 IBM TrackPoint: always reports core events
[   121.614] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event17"
[   121.640] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[   121.640] (--) TPPS/2 IBM TrackPoint: Found relative axes
[   121.640] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[   121.640] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[   121.640] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[   121.640] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   121.640] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input17/event17"
[   121.640] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[   121.640] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[   121.640] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[   121.640] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[   121.640] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[   121.640] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[   121.640] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
[   121.640] (II) No input driver/identifier specified (ignoring)
[   121.640] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[   121.640] (II) No input driver/identifier specified (ignoring)
[   121.641] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[   121.641] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[   121.641] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[   121.641] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   121.641] (**) ThinkPad Extra Buttons: always reports core events
[   121.641] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[   121.666] (--) ThinkPad Extra Buttons: Found keys
[   121.666] (II) ThinkPad Extra Buttons: Configuring as keyboard
[   121.666] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[   121.666] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[   121.666] (**) Option "xkb_rules" "evdev"
[   121.666] (**) Option "xkb_model" "evdev"
[   121.666] (**) Option "xkb_layout" "us"
[   122.391] (II) intel(0): EDID vendor "LEN", prod id 16435
[   122.391] (II) intel(0): Printing DDC gathered Modelines:
[   122.391] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   122.391] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   122.411] (II) intel(0): EDID vendor "LEN", prod id 16435
[   122.411] (II) intel(0): Printing DDC gathered Modelines:
[   122.411] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   122.411] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   336.811] (II) intel(0): EDID vendor "LEN", prod id 16435
[   336.811] (II) intel(0): Printing DDC gathered Modelines:
[   336.811] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   336.811] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   336.835] (II) intel(0): EDID vendor "LEN", prod id 16435
[   336.835] (II) intel(0): Printing DDC gathered Modelines:
[   336.835] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   336.835] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   343.607] (II) intel(0): EDID vendor "LEN", prod id 16435
[   343.607] (II) intel(0): Printing DDC gathered Modelines:
[   343.607] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   343.607] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   343.672] (II) intel(0): EDID vendor "LEN", prod id 16435
[   343.673] (II) intel(0): Printing DDC gathered Modelines:
[   343.673] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   343.673] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   343.735] (II) intel(0): EDID vendor "LEN", prod id 16435
[   343.735] (II) intel(0): Printing DDC gathered Modelines:
[   343.736] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   343.736] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   344.801] (II) intel(0): EDID vendor "LEN", prod id 16435
[   344.801] (II) intel(0): Printing DDC gathered Modelines:
[   344.801] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   344.801] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   344.867] (II) intel(0): EDID vendor "LEN", prod id 16435
[   344.867] (II) intel(0): Printing DDC gathered Modelines:
[   344.867] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   344.867] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   362.559] (II) intel(0): EDID vendor "LEN", prod id 16435
[   362.559] (II) intel(0): Printing DDC gathered Modelines:
[   362.559] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   362.559] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   362.624] (II) intel(0): EDID vendor "LEN", prod id 16435
[   362.624] (II) intel(0): Printing DDC gathered Modelines:
[   362.624] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   362.624] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   362.692] (II) intel(0): EDID vendor "LEN", prod id 16435
[   362.692] (II) intel(0): Printing DDC gathered Modelines:
[   362.692] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   362.692] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   362.756] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[   362.774] (II) intel(0): EDID vendor "LEN", prod id 16435
[   362.774] (II) intel(0): Printing DDC gathered Modelines:
[   362.774] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   362.774] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   362.847] (II) intel(0): EDID vendor "LEN", prod id 16435
[   362.847] (II) intel(0): Printing DDC gathered Modelines:
[   362.847] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   362.847] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   525.745] (II) intel(0): EDID vendor "LEN", prod id 16435
[   525.745] (II) intel(0): Printing DDC gathered Modelines:
[   525.745] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   525.745] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   530.202] (II) intel(0): EDID vendor "LEN", prod id 16435
[   530.202] (II) intel(0): Printing DDC gathered Modelines:
[   530.202] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   530.202] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   536.835] (II) intel(0): EDID vendor "LEN", prod id 16435
[   536.835] (II) intel(0): Printing DDC gathered Modelines:
[   536.835] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   536.835] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   539.995] (II) intel(0): EDID vendor "LEN", prod id 16435
[   539.995] (II) intel(0): Printing DDC gathered Modelines:
[   539.995] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   539.995] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   540.067] (II) intel(0): Allocated new frame buffer 3136x1050 stride 12800, tiled
[   540.116] (II) intel(0): EDID vendor "LEN", prod id 16435
[   540.116] (II) intel(0): Printing DDC gathered Modelines:
[   540.116] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   540.116] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   540.199] (II) intel(0): EDID vendor "LEN", prod id 16435
[   540.199] (II) intel(0): Printing DDC gathered Modelines:
[   540.199] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   540.199] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   551.649] (II) intel(0): EDID vendor "LEN", prod id 16435
[   551.649] (II) intel(0): Printing DDC gathered Modelines:
[   551.649] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   551.649] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   551.717] (II) intel(0): EDID vendor "LEN", prod id 16435
[   551.717] (II) intel(0): Printing DDC gathered Modelines:
[   551.717] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   551.717] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[   551.786] (II) intel(0): EDID vendor "LEN", prod id 16435
[   551.786] (II) intel(0): Printing DDC gathered Modelines:
[   551.786] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[   551.786] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1499.858] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1499.858] (II) intel(0): Printing DDC gathered Modelines:
[  1499.858] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1499.859] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1506.345] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1506.345] (II) intel(0): Printing DDC gathered Modelines:
[  1506.345] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1506.345] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1506.411] (II) intel(0): Allocated new frame buffer 3200x1050 stride 12800, tiled
[  1506.470] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1506.470] (II) intel(0): Printing DDC gathered Modelines:
[  1506.470] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1506.470] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1506.547] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1506.547] (II) intel(0): Printing DDC gathered Modelines:
[  1506.547] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1506.547] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1506.608] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1506.608] (II) intel(0): Printing DDC gathered Modelines:
[  1506.608] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1506.608] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1506.672] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1506.672] (II) intel(0): Printing DDC gathered Modelines:
[  1506.672] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1506.672] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1512.035] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1512.036] (II) intel(0): Printing DDC gathered Modelines:
[  1512.036] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1512.036] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1512.107] (II) intel(0): Allocated new frame buffer 3392x1050 stride 13824, tiled
[  1512.187] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1512.187] (II) intel(0): Printing DDC gathered Modelines:
[  1512.187] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1512.187] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1512.266] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1512.266] (II) intel(0): Printing DDC gathered Modelines:
[  1512.266] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1512.266] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1512.323] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1512.323] (II) intel(0): Printing DDC gathered Modelines:
[  1512.323] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1512.323] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)
[  1512.391] (II) intel(0): EDID vendor "LEN", prod id 16435
[  1512.391] (II) intel(0): Printing DDC gathered Modelines:
[  1512.391] (II) intel(0): Modeline "1440x900"x0.0  100.00  1440 1488 1520 1800  900 903 907 922 -hsync -vsync (55.6 kHz)
[  1512.391] (II) intel(0): Modeline "1440x900"x0.0   81.95  1440 1488 1520 1768  900 903 909 926 -hsync -vsync (46.4 kHz)

- i don't use 10-monitor.conf
- tried used disper

disper -e -r 1440x900,1680x1050 -t top

but that didn't work either

any suggestions are welcomed...

Offline

#2 2011-05-16 16:49:23

BurntSushi
Member
From: Massachusetts
Registered: 2009-06-28
Posts: 362
Website

Re: external monitor shifted to the right

Could you post screenshots?


Education is favorable to liberty. Freedom can exist only in a society of knowledge. Without learning, men are incapable of knowing their rights, and where learning is confined to a few people, liberty can be neither equal nor universal.

Tu ne cede malis sed contra audentior ito

Offline

#3 2011-05-16 17:07:00

ewaller
Administrator
From: Pasadena, CA
Registered: 2009-07-13
Posts: 20,693

Re: external monitor shifted to the right

What is the interface to the external monitor (Is it, for example, analog VGA) ??

Monitors typically have settings that are dependent on the input video format.  Settings such as clock phase, x and y offset and overrun length are set on a format by format, and, typically, for different refresh rates for a given format.

So, the bottom line is:  Have you tried adjusting the monitor itself?


Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
The shortest way to ruin a country is to give power to demagogues.— Dionysius of Halicarnassus
---
How to Ask Questions the Smart Way

Offline

#4 2011-05-16 18:10:06

djidji
Member
Registered: 2007-02-26
Posts: 57

Re: external monitor shifted to the right

thanks for responses

@BurntSushi
here is what scrot gave me: http://dl.dropbox.com/u/292474/arch/output.jpg
but what i see is more like: http://dl.dropbox.com/u/292474/arch/output_view.jpg

@ewaller
interface is VGA. i have tried changing the H. Position on the monitor to "slide it back" but even when it's completely at 100% on one side i gain back half of the black area. i don't know what else i can change on the monitor that would help me out.

Offline

#5 2011-05-16 18:15:06

djidji
Member
Registered: 2007-02-26
Posts: 57

Re: external monitor shifted to the right

i just realized that my post title is wrong - the external monitor is shifted to the LEFT not RIGHT....

Offline

#6 2011-05-16 21:09:55

BurntSushi
Member
From: Massachusetts
Registered: 2009-06-28
Posts: 362
Website

Re: external monitor shifted to the right

Another possibly stupid question (this is a weird scenario)---have you tried using the monitor's "auto adjust" feature?


Education is favorable to liberty. Freedom can exist only in a society of knowledge. Without learning, men are incapable of knowing their rights, and where learning is confined to a few people, liberty can be neither equal nor universal.

Tu ne cede malis sed contra audentior ito

Offline

#7 2011-05-16 21:54:51

djidji
Member
Registered: 2007-02-26
Posts: 57

Re: external monitor shifted to the right

BurntSushi wrote:

Another possibly stupid question (this is a weird scenario)---have you tried using the monitor's "auto adjust" feature?

i've pushed the Auto button so many times the monitor might not be working just out of spite now. joking aside when i do push Auto it starts inching (barely) to the right but after it is done adjusting the image just goes back to where it was in the first place.

Offline

Board footer

Powered by FluxBB