You are not logged in.
- Topics: Active | Unanswered
#1 2011-06-11 20:24:07
- Einkilink
- Member
- Registered: 2011-02-05
- Posts: 18
After update laptop doesn't start KDE, just console mode
Hello guys,
I have this problem:
Yesterday I've updated my system (after a few months without doing it...) and then to my next restart I've couldn't start KDE just console mode showed up.
I checked rc.conf and inittab, everything was the way it should, then I tried to start manually x with startx and then the problem showed up (I think so):
[ 22.466] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.809] (EE) Error compiling keymap (server-0)
[ 23.809] (EE) XKB: Couldn't compile keymap
[ 23.809] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 23.814] (EE) Error compiling keymap (server-0)
[ 23.814] (EE) XKB: Couldn't compile keymap
[ 23.814] XKB: Failed to compile keymap
[ 23.814] Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
[ 23.814]
Fatal server error:
[ 23.815] Failed to activate core devices.
Here is the log file for Xorg:
[ 22.038]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 22.053] X Protocol Version 11, Revision 0
[ 22.053] Build Operating System: Linux 2.6.38-ARCH i686
[ 22.053] Current Operating System: Linux *** 2.6.39-ARCH #1 SMP PREEMPT Tue Jun 7 05:49:02 UTC 2011 i686
[ 22.053] Kernel command line: root=/dev/sda5 ro
[ 22.053] Build Date: 30 May 2011 08:16:10AM
[ 22.053]
[ 22.053] Current version of pixman: 0.22.0
[ 22.053] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.053] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.053] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 11 14:52:10 2011
[ 22.119] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 22.128] (==) No Layout section. Using the first Screen section.
[ 22.128] (==) No screen section available. Using defaults.
[ 22.128] (**) |-->Screen "Default Screen Section" (0)
[ 22.128] (**) | |-->Monitor "<default monitor>"
[ 22.129] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 22.129] (==) Automatically adding devices
[ 22.129] (==) Automatically enabling devices
[ 22.188] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22.188] Entry deleted from font path.
[ 22.266] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 22.266] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 22.266] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 22.266] (II) Loader magic: 0x822e120
[ 22.266] (II) Module ABI versions:
[ 22.266] X.Org ANSI C Emulation: 0.4
[ 22.266] X.Org Video Driver: 10.0
[ 22.266] X.Org XInput driver : 12.2
[ 22.266] X.Org Server Extension : 5.0
[ 22.267] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000efe8/8
[ 22.267] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
[ 22.267] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22.267] (II) LoadModule: "extmod"
[ 22.380] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 22.391] (II) Module extmod: vendor="X.Org Foundation"
[ 22.391] compiled for 1.10.2, module version = 1.0.0
[ 22.391] Module class: X.Org Server Extension
[ 22.391] ABI class: X.Org Server Extension, version 5.0
[ 22.391] (II) Loading extension MIT-SCREEN-SAVER
[ 22.391] (II) Loading extension XFree86-VidModeExtension
[ 22.391] (II) Loading extension XFree86-DGA
[ 22.392] (II) Loading extension DPMS
[ 22.392] (II) Loading extension XVideo
[ 22.392] (II) Loading extension XVideo-MotionCompensation
[ 22.392] (II) Loading extension X-Resource
[ 22.392] (II) LoadModule: "dbe"
[ 22.392] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 22.393] (II) Module dbe: vendor="X.Org Foundation"
[ 22.393] compiled for 1.10.2, module version = 1.0.0
[ 22.393] Module class: X.Org Server Extension
[ 22.393] ABI class: X.Org Server Extension, version 5.0
[ 22.393] (II) Loading extension DOUBLE-BUFFER
[ 22.393] (II) LoadModule: "glx"
[ 22.393] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.405] (II) Module glx: vendor="X.Org Foundation"
[ 22.405] compiled for 1.10.2, module version = 1.0.0
[ 22.405] ABI class: X.Org Server Extension, version 5.0
[ 22.405] (==) AIGLX enabled
[ 22.405] (II) Loading extension GLX
[ 22.405] (II) LoadModule: "record"
[ 22.405] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.406] (II) Module record: vendor="X.Org Foundation"
[ 22.406] compiled for 1.10.2, module version = 1.13.0
[ 22.406] Module class: X.Org Server Extension
[ 22.406] ABI class: X.Org Server Extension, version 5.0
[ 22.406] (II) Loading extension RECORD
[ 22.406] (II) LoadModule: "dri"
[ 22.407] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.417] (II) Module dri: vendor="X.Org Foundation"
[ 22.417] compiled for 1.10.2, module version = 1.0.0
[ 22.417] ABI class: X.Org Server Extension, version 5.0
[ 22.417] (II) Loading extension XFree86-DRI
[ 22.417] (II) LoadModule: "dri2"
[ 22.417] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.418] (II) Module dri2: vendor="X.Org Foundation"
[ 22.418] compiled for 1.10.2, module version = 1.2.0
[ 22.418] ABI class: X.Org Server Extension, version 5.0
[ 22.418] (II) Loading extension DRI2
[ 22.418] (==) Matched intel as autoconfigured driver 0
[ 22.418] (==) Matched vesa as autoconfigured driver 1
[ 22.418] (==) Matched fbdev as autoconfigured driver 2
[ 22.418] (==) Assigned the driver to the xf86ConfigLayout
[ 22.418] (II) LoadModule: "intel"
[ 22.418] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 22.445] (II) Module intel: vendor="X.Org Foundation"
[ 22.445] compiled for 1.10.2, module version = 2.15.0
[ 22.445] Module class: X.Org Video Driver
[ 22.445] ABI class: X.Org Video Driver, version 10.0
[ 22.445] (II) LoadModule: "vesa"
[ 22.445] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 22.446] (II) Module vesa: vendor="X.Org Foundation"
[ 22.446] compiled for 1.10.0, module version = 2.3.0
[ 22.446] Module class: X.Org Video Driver
[ 22.446] ABI class: X.Org Video Driver, version 10.0
[ 22.446] (II) LoadModule: "fbdev"
[ 22.466] (WW) Warning, couldn't open module fbdev
[ 22.466] (II) UnloadModule: "fbdev"
[ 22.466] (II) Unloading fbdev
[ 22.466] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 22.466] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 22.467] (II) VESA: driver for VESA chipsets: vesa
[ 22.467] (++) using VT number 7
[ 22.473] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 22.473] (WW) Falling back to old probe method for vesa
[ 22.473] drmOpenDevice: node name is /dev/dri/card0
[ 22.473] drmOpenDevice: open result is 8, (OK)
[ 22.473] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 22.473] drmOpenDevice: node name is /dev/dri/card0
[ 22.473] drmOpenDevice: open result is 8, (OK)
[ 22.473] drmOpenByBusid: drmOpenMinor returns 8
[ 22.473] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 22.473] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 22.473] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 22.473] (==) intel(0): RGB weight 888
[ 22.473] (==) intel(0): Default visual is TrueColor
[ 22.473] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
[ 22.473] (--) intel(0): Chipset: "965GM"
[ 22.473] (**) intel(0): Relaxed fencing enabled
[ 22.473] (**) intel(0): Framebuffer tiled
[ 22.473] (**) intel(0): Pixmaps tiled
[ 22.473] (**) intel(0): 3D buffers tiled
[ 22.473] (**) intel(0): SwapBuffers wait enabled
[ 22.473] (==) intel(0): video overlay key set to 0x101fe
[ 22.473] (II) intel(0): Output LVDS1 has no monitor section
[ 22.475] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 22.493] (II) intel(0): Output VGA1 has no monitor section
[ 22.509] (II) intel(0): Output HDMI1 has no monitor section
[ 22.837] (II) intel(0): Output TV1 has no monitor section
[ 22.837] (II) intel(0): EDID for output LVDS1
[ 22.837] (II) intel(0): Manufacturer: LPL Model: 301 Serial#: 0
[ 22.837] (II) intel(0): Year: 2008 Week: 0
[ 22.837] (II) intel(0): EDID Version: 1.3
[ 22.837] (II) intel(0): Digital Display Input
[ 22.837] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 22.837] (II) intel(0): Gamma: 2.20
[ 22.837] (II) intel(0): No DPMS capabilities specified
[ 22.837] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 22.837] (II) intel(0): First detailed timing is preferred mode
[ 22.837] (II) intel(0): redX: 0.600 redY: 0.351 greenX: 0.324 greenY: 0.554
[ 22.837] (II) intel(0): blueX: 0.153 blueY: 0.145 whiteX: 0.312 whiteY: 0.328
[ 22.837] (II) intel(0): Manufacturer's mask: 0
[ 22.837] (II) intel(0): Supported detailed timing:
[ 22.837] (II) intel(0): clock: 75.5 MHz Image Size: 331 x 207 mm
[ 22.837] (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1392 h_blank_end 1512 h_border: 0
[ 22.837] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 832 v_border: 0
[ 22.837] (II) intel(0): Supported detailed timing:
[ 22.837] (II) intel(0): clock: 75.5 MHz Image Size: 331 x 207 mm
[ 22.837] (II) intel(0): h_active: 1280 h_sync: 1344 h_sync_end 1392 h_blank_end 1512 h_border: 0
[ 22.837] (II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 832 v_border: 0
[ 22.837] (II) intel(0): D196J€154W01
[ 22.837] (II) intel(0): $2=Eh‹§ÿ
[ 22.837] (II) intel(0): EDID (in hex):
[ 22.837] (II) intel(0): 00ffffffffffff00320c010300000000
[ 22.837] (II) intel(0): 00120103802115780ab3409959538d27
[ 22.837] (II) intel(0): 25505400000001010101010101010101
[ 22.837] (II) intel(0): 0101010101017e1d00e8502020304030
[ 22.837] (II) intel(0): 36004bcf100000197e1d00e850202030
[ 22.837] (II) intel(0): 403036004bcf10000000000000fe0044
[ 22.837] (II) intel(0): 3139364a803135345730310a000000fe
[ 22.837] (II) intel(0): 0024323d45688ba7ff01010a202000af
[ 22.837] (II) intel(0): EDID vendor "LPL", prod id 769
[ 22.837] (II) intel(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
[ 22.874] (II) intel(0): Printing DDC gathered Modelines:
[ 22.874] (II) intel(0): Modeline "1280x800"x0.0 75.50 1280 1344 1392 1512 800 803 809 832 -hsync -vsync (49.9 kHz)
[ 22.874] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 22.874] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 22.874] (II) intel(0): Printing probed modes for output LVDS1
[ 22.874] (II) intel(0): Modeline "1280x800"x60.0 75.50 1280 1344 1392 1512 800 803 809 832 -hsync -vsync (49.9 kHz)
[ 22.874] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 22.874] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 22.874] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 22.874] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 22.893] (II) intel(0): EDID for output VGA1
[ 22.909] (II) intel(0): EDID for output HDMI1
[ 23.230] (II) intel(0): EDID for output TV1
[ 23.230] (II) intel(0): Output LVDS1 connected
[ 23.230] (II) intel(0): Output VGA1 disconnected
[ 23.230] (II) intel(0): Output HDMI1 disconnected
[ 23.230] (II) intel(0): Output TV1 disconnected
[ 23.230] (II) intel(0): Using exact sizes for initial modes
[ 23.230] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 23.230] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.230] (II) intel(0): Kernel page flipping support detected, enabling
[ 23.230] (**) intel(0): Display dimensions: (330, 210) mm
[ 23.230] (**) intel(0): DPI set to (98, 96)
[ 23.230] (II) Loading sub module "fb"
[ 23.230] (II) LoadModule: "fb"
[ 23.231] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.270] (II) Module fb: vendor="X.Org Foundation"
[ 23.270] compiled for 1.10.2, module version = 1.0.0
[ 23.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.270] (II) Loading sub module "dri2"
[ 23.270] (II) LoadModule: "dri2"
[ 23.271] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.271] (II) Module dri2: vendor="X.Org Foundation"
[ 23.271] compiled for 1.10.2, module version = 1.2.0
[ 23.271] ABI class: X.Org Server Extension, version 5.0
[ 23.271] (II) UnloadModule: "vesa"
[ 23.271] (II) Unloading vesa
[ 23.271] (==) Depth 24 pixmap format is 32 bpp
[ 23.271] (II) intel(0): [DRI2] Setup complete
[ 23.271] (II) intel(0): [DRI2] DRI driver: i965
[ 23.271] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 23.324] (II) UXA(0): Driver registered support for the following operations:
[ 23.324] (II) solid
[ 23.324] (II) copy
[ 23.324] (II) composite (RENDER acceleration)
[ 23.324] (II) put_image
[ 23.324] (II) get_image
[ 23.324] (==) intel(0): Backing store disabled
[ 23.324] (==) intel(0): Silken mouse enabled
[ 23.328] (II) intel(0): Initializing HW Cursor
[ 23.347] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.351] (==) intel(0): DPMS enabled
[ 23.351] (==) intel(0): Intel XvMC decoder enabled
[ 23.351] (II) intel(0): Set up textured video
[ 23.351] (II) intel(0): Set up overlay video
[ 23.351] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[ 23.351] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.351] (==) intel(0): hotplug detection: "enabled"
[ 23.351] (--) RandR disabled
[ 23.351] (II) Initializing built-in extension Generic Event Extension
[ 23.351] (II) Initializing built-in extension SHAPE
[ 23.351] (II) Initializing built-in extension MIT-SHM
[ 23.351] (II) Initializing built-in extension XInputExtension
[ 23.351] (II) Initializing built-in extension XTEST
[ 23.351] (II) Initializing built-in extension BIG-REQUESTS
[ 23.351] (II) Initializing built-in extension SYNC
[ 23.351] (II) Initializing built-in extension XKEYBOARD
[ 23.351] (II) Initializing built-in extension XC-MISC
[ 23.351] (II) Initializing built-in extension SECURITY
[ 23.351] (II) Initializing built-in extension XINERAMA
[ 23.351] (II) Initializing built-in extension XFIXES
[ 23.351] (II) Initializing built-in extension RENDER
[ 23.351] (II) Initializing built-in extension RANDR
[ 23.351] (II) Initializing built-in extension COMPOSITE
[ 23.351] (II) Initializing built-in extension DAMAGE
[ 23.532] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.532] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.532] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.532] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 23.532] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.532] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
[ 23.532] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.533] (II) intel(0): Setting screen physical size to 338 x 211
[ 23.809] (EE) Error compiling keymap (server-0)
[ 23.809] (EE) XKB: Couldn't compile keymap
[ 23.809] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 23.814] (EE) Error compiling keymap (server-0)
[ 23.814] (EE) XKB: Couldn't compile keymap
[ 23.814] XKB: Failed to compile keymap
[ 23.814] Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
[ 23.814]
Fatal server error:
[ 23.815] Failed to activate core devices.
[ 23.815]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 23.815] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 23.815]
[ 23.815] (II) AIGLX: Suspending AIGLX clients for VT switchOffline
#2 2011-06-11 21:48:45
- Einkilink
- Member
- Registered: 2011-02-05
- Posts: 18
Re: After update laptop doesn't start KDE, just console mode
I just had to free space and reinstall xorg...
Solved
Offline