You are not logged in.
Pages: 1
I have two boxes, an eeepc laptop with integrated sound and a desktop with onboard sound and usb e-mu 0202 and bluetooth headset which i plug in either of boxes. Both pulseaudio servers are told with paprefs to share their devices and discover others on the net. But some sinks are not discovered:
[qdiesel@sh-desktop ~]$ pacmd
>>> list-sinks
3 sink(s) available.
index: 0
name: <alsa_output.usb-E-MU_Systems__Inc._E-MU_0202___USB_E-MU-DA-3F02-07D80902-12C65-STATION_01-00-USB.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9049
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 0 <alsa_card.usb-E-MU_Systems__Inc._E-MU_0202___USB_E-MU-DA-3F02-07D80902-12C65-STATION_01-00-USB>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "E-MU 0202 | USB"
alsa.long_card_name = "E-MU Systems, Inc. E-MU 0202 | USB at usb-0000:00:1d.1-1, full speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:1d.1-usb-0:1:1.0"
sysfs.path = "/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/sound/card0"
udev.id = "usb-E-MU_Systems__Inc._E-MU_0202___USB_E-MU-DA-3F02-07D80902-12C65-STATION_01-00-USB"
device.bus = "usb"
device.vendor.id = "041e"
device.vendor.name = "Creative Technology, Ltd"
device.product.id = "3f02"
device.product.name = "E-Mu 0202"
device.serial = "E-MU_Systems__Inc._E-MU_0202___USB_E-MU-DA-3F02-07D80902-12C65-STATION_01"
device.string = "front:0"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "176400"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "E-Mu 0202 Analog Stereo"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB041e:3f02"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-usb"
* index: 1
name: <alsa_output.pci-0000_00_1f.5.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 63%
-12.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
card: 1 <alsa_card.pci-0000_00_1f.5>
module: 5
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Intel ICH5"
alsa.id = "Intel ICH"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Intel ICH5"
alsa.long_card_name = "Intel ICH5 with ALC658D at irq 17"
alsa.driver_name = "snd_intel8x0"
device.bus_path = "pci-0000:00:1f.5"
sysfs.path = "/devices/pci0000:00/0000:00:1f.5/sound/card1"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "24d5"
device.product.name = "82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "65536"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internal Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC658D"
alsa.components = "AC97a:414c4781"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
output-amplifier-on: Amplifier (priority 10)
output-amplifier-off: No Amplifier (priority 0)
active port: <output-amplifier-on>
index: 7
name: <bluez_sink.55_20_39_00_26_96>
driver: <module-bluetooth-device.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME
state: SUSPENDED
suspend cause: IDLE
priority: 9030
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 3 KiB
max rewind: 0 KiB
monitor source: 13
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 1
fixed latency: 45.32 ms
card: 2 <bluez_card.55_20_39_00_26_96>
module: 41
properties:
bluetooth.protocol = "a2dp"
device.icon_name = "blueman"
device.description = "Nokia BH-503"
device.string = "55:20:39:00:26:96"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/3374/hci0/dev_55_20_39_00_26_96"
bluez.class = "0x240404"
bluez.name = "Nokia BH-503"
device.intended_roles = "phone"
that's on desktop, laptop's sound card is missing
[qdiesel@troll ~]$ pacmd
>>> list-sinks
3 sink(s) available.
* index: 0
name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: 0: 100% 1: 100%
0: 0.00 dB 1: 0.00 dB
balance 0.00
base volume: 96%
-1.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 371.52 ms
card: 0 <alsa_card.pci-0000_00_1b.0>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC269 Analog"
alsa.id = "ALC269 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "HDA Intel"
alsa.long_card_name = "HDA Intel at 0xf7eb8000 irq 40"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "27d8"
device.product.name = "N10/ICH 7 Family High Definition Audio Controller"
device.form_factor = "internal"
device.string = "front:0"
device.buffering.buffer_size = "65536"
device.buffering.fragment_size = "32768"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Internal Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC269"
alsa.components = "HDA:10ec0269,1043831a,00100004"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output: Analog Output (priority 9900)
analog-output-speaker: Analog Speakers (priority 10000)
analog-output-headphones: Analog Headphones (priority 9000)
active port: <analog-output-speaker>
index: 1
name: <tunnel.sh-desktop.local.alsa_output.pci-0000_00_1f.5.analog-stereo>
driver: <module-tunnel.c>
flags: NETWORK HW_MUTE_CTRL HW_VOLUME_CTRL LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 0
volume: 0: 100% 1: 100%
balance 0.00
base volume: 100%
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 2
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 250.00 ms
module: 22
properties:
device.description = "Internal Audio Analog Stereo on qdiesel@sh-desktop"
tunnel.remote.server = "[192.168.1.5]:4713"
tunnel.remote.sink = "alsa_output.pci-0000_00_1f.5.analog-stereo"
device.icon_name = "audio-card"
tunnel.remote_version = "16"
tunnel.remote.user = "qdiesel"
tunnel.remote.fqdn = "sh-desktop"
tunnel.remote.description = "Internal Audio Analog Stereo"
index: 2
name: <tunnel.sh-desktop.local.bluez_sink.55_20_39_00_26_96>
driver: <module-tunnel.c>
flags: NETWORK HW_MUTE_CTRL HW_VOLUME_CTRL LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 0
volume: 0: 100% 1: 100%
balance 0.00
base volume: 100%
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 4
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
fixed latency: 250.00 ms
module: 25
properties:
device.description = "Nokia BH-503 on qdiesel@sh-desktop"
tunnel.remote.server = "[192.168.1.5]:4713"
tunnel.remote.sink = "bluez_sink.55_20_39_00_26_96"
device.icon_name = "audio-card"
tunnel.remote_version = "16"
tunnel.remote.user = "qdiesel"
tunnel.remote.fqdn = "sh-desktop"
tunnel.remote.description = "Nokia BH-503"
e-Mu isn't seen by laptop.
both boxes have up-to-date pulseaudio and libpulse (0.9.22-2). cleaning /etc/pulse and ~/.pulse and reinstalling didn't help.
Offline
Pages: 1