You are not logged in.
Pages: 1
Hi all,
My output from lm_sensors seems weird. I'm looking for the CPU temperature which I gather is the second, under k8temp. However, this temperature fluctuates wildly as soon as I do something CPU intensive which leads me to believe the output isn't correct. Surely the temperature can't jump 10 degrees in 5 seconds.
Here's my lm_sensors output:
[~] sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +0.0°C (crit = +94.0°C)
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +68.0°C
I also run the following in conky:
${execi 300 echo $(($(cat /sys/ bus/pci/drivers/k8temp/0000\:00\:18.3/temp1_input) / 1000))}°C
which outputs the same as lm_sensors.
Offline
This might be the reason ? : http://www.lm-sensors.org/ticket/2278
Philosophy is looking for a black cat in a dark room. Metaphysics is looking for a black cat in a dark room that isn't there. Religion is looking for a black cat in a dark room that isn't there and shouting "I found it!". Science is looking for a black cat in a dark room with a flashlight.
Offline
Great, seems there's no fix for it then. Thanks for the link, though! At least I know what's going on with it.
Is there any solution to reading my CPU temp? (AMD Turion 64M)
Offline
I believe that there's some temperature information in /proc/acpi. Maybe have a look around there?
Offline
Pages: 1