Intel 830m video problems

Xemertix · 2011-09-25 20:38:25

I'm running archlinux on a Toughbook CF-28,it works very good but I have problem with the old 830m Intel video chipset.
I have kernel linux 3.0.4 intel-dri 7.11 xf86-video-intel 2.16.0 mesa 7.11 xorg-server 1.10.4 and Kms enabled.

3D works good (e.g. I can run armagetronad) but 2D acceleration is broken,I can't see videos with Xv (intel) or enable kwin effects the system freeze or the acceleration is disabled.

I can see movies only enabling the slower X11 video outtput in mplayer/vlc..

I know that this video drivers don't work very well with older intel cards,but I want to get them working..I hope developers will not drop support for these cards.
Enabling shadow,disabling dri or downgrading is not a solution.
Where's /debug/dri/0/i915_error_state ?

xorg log

[    38.727] 
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    38.758] X Protocol Version 11, Revision 0
[    38.758] Build Operating System: Linux 3.0-ARCH i686 
[    38.758] Current Operating System: Linux myhost 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686
[    38.758] Kernel command line: root=/dev/mapper/vgroup-root cryptdevice=/dev/sda4:vgroup  ro
[    38.759] Build Date: 17 September 2011  07:40:13AM
[    38.759]  
[    38.759] Current version of pixman: 0.22.2
[    38.759] 	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
[    38.759] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    38.759] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 25 21:19:25 2011
[    38.882] (==) Using config file: "/etc/X11/xorg.conf"
[    38.882] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    39.055] (==) No Layout section.  Using the first Screen section.
[    39.055] (**) |-->Screen "Screen0" (0)
[    39.055] (**) |   |-->Monitor "Monitor0"
[    39.056] (**) |   |-->Device "Card0"
[    39.056] (==) Automatically adding devices
[    39.056] (==) Automatically enabling devices
[    39.196] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    39.196] 	Entry deleted from font path.
[    39.250] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    39.250] 	Entry deleted from font path.
[    39.251] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    39.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    39.268] 	Entry deleted from font path.
[    39.268] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    39.268] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    39.268] (==) ModulePath set to "/usr/lib/xorg/modules"
[    39.268] (**) Extension "Composite" is enabled
[    39.268] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    39.268] (II) Loader magic: 0x8230d40
[    39.268] (II) Module ABI versions:
[    39.268] 	X.Org ANSI C Emulation: 0.4
[    39.268] 	X.Org Video Driver: 10.0
[    39.268] 	X.Org XInput driver : 12.2
[    39.268] 	X.Org Server Extension : 5.0
[    39.270] (--) PCI:*(0:0:2:0) 8086:3577:10f7:8338 rev 4, Mem @ 0xe8000000/134217728, 0xe0000000/524288
[    39.270] (--) PCI: (0:0:2:1) 8086:3577:10f7:8338 rev 0, Mem @ 0xf0000000/134217728, 0xe0080000/524288
[    39.270] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    39.270] (II) LoadModule: "extmod"
[    39.343] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    39.412] (II) Module extmod: vendor="X.Org Foundation"
[    39.412] 	compiled for 1.10.4, module version = 1.0.0
[    39.412] 	Module class: X.Org Server Extension
[    39.412] 	ABI class: X.Org Server Extension, version 5.0
[    39.412] (II) Loading extension MIT-SCREEN-SAVER
[    39.412] (II) Loading extension XFree86-VidModeExtension
[    39.412] (II) Loading extension XFree86-DGA
[    39.431] (II) Loading extension DPMS
[    39.431] (II) Loading extension XVideo
[    39.431] (II) Loading extension XVideo-MotionCompensation
[    39.431] (II) Loading extension X-Resource
[    39.431] (II) LoadModule: "dbe"
[    39.431] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    39.448] (II) Module dbe: vendor="X.Org Foundation"
[    39.448] 	compiled for 1.10.4, module version = 1.0.0
[    39.448] 	Module class: X.Org Server Extension
[    39.448] 	ABI class: X.Org Server Extension, version 5.0
[    39.448] (II) Loading extension DOUBLE-BUFFER
[    39.448] (II) LoadModule: "glx"
[    39.449] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    39.698] (II) Module glx: vendor="X.Org Foundation"
[    39.698] 	compiled for 1.10.4, module version = 1.0.0
[    39.698] 	ABI class: X.Org Server Extension, version 5.0
[    39.698] (==) AIGLX enabled
[    39.698] (II) Loading extension GLX
[    39.698] (II) LoadModule: "record"
[    39.699] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    39.733] (II) Module record: vendor="X.Org Foundation"
[    39.734] 	compiled for 1.10.4, module version = 1.13.0
[    39.734] 	Module class: X.Org Server Extension
[    39.734] 	ABI class: X.Org Server Extension, version 5.0
[    39.734] (II) Loading extension RECORD
[    39.734] (II) LoadModule: "dri"
[    39.734] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    39.813] (II) Module dri: vendor="X.Org Foundation"
[    39.813] 	compiled for 1.10.4, module version = 1.0.0
[    39.813] 	ABI class: X.Org Server Extension, version 5.0
[    39.813] (II) Loading extension XFree86-DRI
[    39.813] (II) LoadModule: "dri2"
[    39.814] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    39.860] (II) Module dri2: vendor="X.Org Foundation"
[    39.860] 	compiled for 1.10.4, module version = 1.2.0
[    39.860] 	ABI class: X.Org Server Extension, version 5.0
[    39.861] (II) Loading extension DRI2
[    39.861] (II) LoadModule: "intel"
[    39.967] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    40.032] (II) Module intel: vendor="X.Org Foundation"
[    40.032] 	compiled for 1.10.4, module version = 2.16.0
[    40.032] 	Module class: X.Org Video Driver
[    40.032] 	ABI class: X.Org Video Driver, version 10.0
[    40.033] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    40.034] (++) using VT number 7

[    40.051] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    40.051] drmOpenDevice: node name is /dev/dri/card0
[    40.051] drmOpenDevice: open result is 8, (OK)
[    40.051] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    40.052] drmOpenDevice: node name is /dev/dri/card0
[    40.052] drmOpenDevice: open result is 8, (OK)
[    40.052] drmOpenByBusid: drmOpenMinor returns 8
[    40.052] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    40.052] (**) intel(0): Depth 16, (--) framebuffer bpp 16
[    40.052] (==) intel(0): RGB weight 565
[    40.052] (==) intel(0): Default visual is TrueColor
[    40.052] (**) intel(0): Option "DRI" "on"
[    40.052] (II) intel(0): Integrated Graphics Chipset: Intel(R) i830M
[    40.052] (--) intel(0): Chipset: "i830M"
[    40.052] (**) intel(0): Relaxed fencing disabled
[    40.052] (**) intel(0): Wait on SwapBuffers? enabled
[    40.052] (**) intel(0): Triple buffering? enabled
[    40.052] (**) intel(0): Framebuffer tiled
[    40.052] (**) intel(0): Pixmaps tiled
[    40.052] (**) intel(0): 3D buffers tiled
[    40.052] (**) intel(0): SwapBuffers wait enabled
[    40.052] (==) intel(0): video overlay key set to 0x83e
[    40.135] (II) intel(0): Output VGA1 using monitor section Monitor0
[    40.144] (II) intel(0): Output LVDS1 has no monitor section
[    40.242] (II) intel(0): EDID for output VGA1
[    40.243] (II) intel(0): Printing probed modes for output VGA1
[    40.243] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    40.243] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    40.243] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    40.243] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz)
[    40.243] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz)
[    40.265] (II) intel(0): EDID for output LVDS1
[    40.266] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    40.266] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    40.266] (II) intel(0): Printing probed modes for output LVDS1
[    40.266] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
[    40.267] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    40.267] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    40.267] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    40.267] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    40.267] (II) intel(0): Output VGA1 connected
[    40.267] (II) intel(0): Output LVDS1 connected
[    40.267] (II) intel(0): Using user preference for initial modes
[    40.267] (II) intel(0): Output VGA1 using initial mode 1024x768
[    40.267] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    40.267] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    40.267] (II) intel(0): Kernel page flipping support detected, enabling
[    40.267] (==) intel(0): DPI set to (96, 96)
[    40.267] (II) Loading sub module "fb"
[    40.267] (II) LoadModule: "fb"
[    40.268] (II) Loading /usr/lib/xorg/modules/libfb.so
[    40.294] (II) Module fb: vendor="X.Org Foundation"
[    40.294] 	compiled for 1.10.4, module version = 1.0.0
[    40.294] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    40.294] (II) Loading sub module "dri2"
[    40.294] (II) LoadModule: "dri2"
[    40.295] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    40.295] (II) Module dri2: vendor="X.Org Foundation"
[    40.295] 	compiled for 1.10.4, module version = 1.2.0
[    40.295] 	ABI class: X.Org Server Extension, version 5.0
[    40.295] (II) intel(0): [DRI2] Setup complete
[    40.295] (II) intel(0): [DRI2]   DRI driver: i915
[    40.295] (II) intel(0): Allocated new frame buffer 1024x768 stride 2048, tiled
[    40.349] (II) UXA(0): Driver registered support for the following operations:
[    40.349] (II)         solid
[    40.349] (II)         copy
[    40.349] (II)         composite (RENDER acceleration)
[    40.349] (II)         put_image
[    40.349] (II)         get_image
[    40.349] (==) intel(0): Backing store disabled
[    40.349] (==) intel(0): Silken mouse enabled
[    40.356] (II) intel(0): Initializing HW Cursor
[    40.700] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    40.700] (==) intel(0): DPMS enabled
[    40.700] (==) intel(0): Intel XvMC decoder disabled
[    40.700] (II) intel(0): Set up overlay video
[    40.700] (II) intel(0): direct rendering: DRI2 Enabled
[    40.700] (==) intel(0): hotplug detection: "enabled"
[    40.701] (--) RandR disabled
[    40.701] (II) Initializing built-in extension Generic Event Extension
[    40.701] (II) Initializing built-in extension SHAPE
[    40.701] (II) Initializing built-in extension MIT-SHM
[    40.701] (II) Initializing built-in extension XInputExtension
[    40.701] (II) Initializing built-in extension XTEST
[    40.701] (II) Initializing built-in extension BIG-REQUESTS
[    40.701] (II) Initializing built-in extension SYNC
[    40.701] (II) Initializing built-in extension XKEYBOARD
[    40.701] (II) Initializing built-in extension XC-MISC
[    40.701] (II) Initializing built-in extension SECURITY
[    40.701] (II) Initializing built-in extension XINERAMA
[    40.701] (II) Initializing built-in extension XFIXES
[    40.701] (II) Initializing built-in extension RENDER
[    40.701] (II) Initializing built-in extension RANDR
[    40.701] (II) Initializing built-in extension COMPOSITE
[    40.701] (II) Initializing built-in extension DAMAGE
[    41.154] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    41.154] (II) AIGLX: enabled GLX_INTEL_swap_event
[    41.154] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    41.154] (II) AIGLX: enabled GLX_SGI_make_current_read
[    41.154] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    41.154] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[    41.154] (II) GLX: Initialized DRI2 GL provider for screen 0
[    41.156] (II) intel(0): Setting screen physical size to 270 x 203
[    42.128] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    42.128] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    42.128] (II) LoadModule: "evdev"
[    42.128] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    42.147] (II) Module evdev: vendor="X.Org Foundation"
[    42.147] 	compiled for 1.10.0, module version = 2.6.0
[    42.147] 	Module class: X.Org XInput Driver
[    42.147] 	ABI class: X.Org XInput driver, version 12.2
[    42.147] (II) Using input driver 'evdev' for 'Power Button'
[    42.147] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    42.147] (**) Power Button: always reports core events
[    42.147] (**) Power Button: Device: "/dev/input/event4"
[    42.147] (--) Power Button: Found keys
[    42.147] (II) Power Button: Configuring as keyboard
[    42.148] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    42.148] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    42.148] (**) Option "xkb_rules" "evdev"
[    42.148] (**) Option "xkb_model" "evdev"
[    42.148] (**) Option "xkb_layout" "us"
[    42.302] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    42.302] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    42.302] (II) Using input driver 'evdev' for 'Video Bus'
[    42.302] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    42.302] (**) Video Bus: always reports core events
[    42.302] (**) Video Bus: Device: "/dev/input/event5"
[    42.302] (--) Video Bus: Found keys
[    42.302] (II) Video Bus: Configuring as keyboard
[    42.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input5/event5"
[    42.302] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    42.302] (**) Option "xkb_rules" "evdev"
[    42.302] (**) Option "xkb_model" "evdev"
[    42.302] (**) Option "xkb_layout" "us"
[    42.317] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    42.317] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    42.317] (II) Using input driver 'evdev' for 'Power Button'
[    42.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    42.317] (**) Power Button: always reports core events
[    42.317] (**) Power Button: Device: "/dev/input/event2"
[    42.318] (--) Power Button: Found keys
[    42.318] (II) Power Button: Configuring as keyboard
[    42.318] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    42.318] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    42.318] (**) Option "xkb_rules" "evdev"
[    42.318] (**) Option "xkb_model" "evdev"
[    42.318] (**) Option "xkb_layout" "us"
[    42.326] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    42.327] (II) No input driver/identifier specified (ignoring)
[    42.336] (II) config/udev: Adding input device Microsoft Microsoft(R) Compact Optical Mouse (/dev/input/event1)
[    42.336] (**) Microsoft Microsoft(R) Compact Optical Mouse: Applying InputClass "evdev pointer catchall"
[    42.336] (II) Using input driver 'evdev' for 'Microsoft Microsoft(R) Compact Optical Mouse'
[    42.336] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    42.336] (**) Microsoft Microsoft(R) Compact Optical Mouse: always reports core events
[    42.336] (**) Microsoft Microsoft(R) Compact Optical Mouse: Device: "/dev/input/event1"
[    42.337] (--) Microsoft Microsoft(R) Compact Optical Mouse: Found 3 mouse buttons
[    42.337] (--) Microsoft Microsoft(R) Compact Optical Mouse: Found scroll wheel(s)
[    42.337] (--) Microsoft Microsoft(R) Compact Optical Mouse: Found relative axes
[    42.337] (--) Microsoft Microsoft(R) Compact Optical Mouse: Found x and y relative axes
[    42.337] (II) Microsoft Microsoft(R) Compact Optical Mouse: Configuring as mouse
[    42.337] (II) Microsoft Microsoft(R) Compact Optical Mouse: Adding scrollwheel support
[    42.337] (**) Microsoft Microsoft(R) Compact Optical Mouse: YAxisMapping: buttons 4 and 5
[    42.337] (**) Microsoft Microsoft(R) Compact Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    42.337] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input1/event1"
[    42.337] (II) XINPUT: Adding extended input device "Microsoft Microsoft(R) Compact Optical Mouse" (type: MOUSE)
[    42.337] (II) Microsoft Microsoft(R) Compact Optical Mouse: initialized for relative axes.
[    42.337] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) keeping acceleration scheme 1
[    42.337] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration profile 0
[    42.337] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration factor: 2.000
[    42.338] (**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration threshold: 4
[    42.338] (II) config/udev: Adding input device Microsoft Microsoft(R) Compact Optical Mouse (/dev/input/mouse0)
[    42.338] (II) No input driver/identifier specified (ignoring)
[    42.363] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    42.363] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    42.363] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    42.363] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    42.363] (**) AT Translated Set 2 keyboard: always reports core events
[    42.364] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    42.364] (--) AT Translated Set 2 keyboard: Found keys
[    42.364] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    42.364] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    42.364] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    42.364] (**) Option "xkb_rules" "evdev"
[    42.364] (**) Option "xkb_model" "evdev"
[    42.364] (**) Option "xkb_layout" "us"
[    42.366] (II) config/udev: Adding input device PS/2 Touchpad (/dev/input/event7)
[    42.366] (**) PS/2 Touchpad: Applying InputClass "evdev pointer catchall"
[    42.366] (II) Using input driver 'evdev' for 'PS/2 Touchpad'
[    42.366] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    42.366] (**) PS/2 Touchpad: always reports core events
[    42.366] (**) PS/2 Touchpad: Device: "/dev/input/event7"
[    42.366] (--) PS/2 Touchpad: Found 3 mouse buttons
[    42.366] (--) PS/2 Touchpad: Found relative axes
[    42.366] (--) PS/2 Touchpad: Found x and y relative axes
[    42.366] (II) PS/2 Touchpad: Configuring as mouse
[    42.370] (**) PS/2 Touchpad: YAxisMapping: buttons 4 and 5
[    42.370] (**) PS/2 Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    42.370] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[    42.370] (II) XINPUT: Adding extended input device "PS/2 Touchpad" (type: MOUSE)
[    42.370] (II) PS/2 Touchpad: initialized for relative axes.
[    42.370] (**) PS/2 Touchpad: (accel) keeping acceleration scheme 1
[    42.370] (**) PS/2 Touchpad: (accel) acceleration profile 0
[    42.370] (**) PS/2 Touchpad: (accel) acceleration factor: 2.000
[    42.370] (**) PS/2 Touchpad: (accel) acceleration threshold: 4
[    42.371] (II) config/udev: Adding input device PS/2 Touchpad (/dev/input/mouse1)
[    42.371] (II) No input driver/identifier specified (ignoring)
[    42.372] (II) config/udev: Adding input device LBPS/2 Fujitsu Lifebook TouchScreen (/dev/input/event8)
[    42.372] (**) LBPS/2 Fujitsu Lifebook TouchScreen: Applying InputClass "evdev touchscreen catchall"
[    42.372] (**) LBPS/2 Fujitsu Lifebook TouchScreen: Applying InputClass "calibration"
[    42.372] (II) Using input driver 'evdev' for 'LBPS/2 Fujitsu Lifebook TouchScreen'
[    42.372] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    42.372] (**) LBPS/2 Fujitsu Lifebook TouchScreen: always reports core events
[    42.372] (**) LBPS/2 Fujitsu Lifebook TouchScreen: Device: "/dev/input/event8"
[    42.372] (--) LBPS/2 Fujitsu Lifebook TouchScreen: Found absolute axes
[    42.372] (--) LBPS/2 Fujitsu Lifebook TouchScreen: Found x and y absolute axes
[    42.372] (--) LBPS/2 Fujitsu Lifebook TouchScreen: Found absolute touchscreen
[    42.372] (II) LBPS/2 Fujitsu Lifebook TouchScreen: Configuring as touchscreen
[    42.372] (**) LBPS/2 Fujitsu Lifebook TouchScreen: YAxisMapping: buttons 4 and 5
[    42.372] (**) LBPS/2 Fujitsu Lifebook TouchScreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    42.372] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[    42.373] (II) XINPUT: Adding extended input device "LBPS/2 Fujitsu Lifebook TouchScreen" (type: TOUCHSCREEN)
[    42.373] (II) LBPS/2 Fujitsu Lifebook TouchScreen: initialized for absolute axes.
[    42.373] (**) LBPS/2 Fujitsu Lifebook TouchScreen: (accel) keeping acceleration scheme 1
[    42.376] (**) LBPS/2 Fujitsu Lifebook TouchScreen: (accel) acceleration profile 0
[    42.376] (**) LBPS/2 Fujitsu Lifebook TouchScreen: (accel) acceleration factor: 2.000
[    42.376] (**) LBPS/2 Fujitsu Lifebook TouchScreen: (accel) acceleration threshold: 4
[    42.377] (II) config/udev: Adding input device LBPS/2 Fujitsu Lifebook TouchScreen (/dev/input/mouse2)
[    42.377] (**) LBPS/2 Fujitsu Lifebook TouchScreen: Applying InputClass "calibration"
[    42.377] (II) No input driver/identifier specified (ignoring)
[    42.378] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    42.378] (II) No input driver/identifier specified (ignoring)
[  1149.533] [mi] EQ overflowing. The server is probably stuck in an infinite loop.
[  1149.533] 
Backtrace:
[  1149.591] 0: /usr/bin/X (xorg_backtrace+0x37) [0x80a4197]
[  1149.592] 1: /usr/bin/X (mieqEnqueue+0x1d1) [0x809e271]
[  1149.592] 2: /usr/bin/X (xf86PostMotionEventM+0xb0) [0x80c55f0]
[  1149.592] 3: /usr/bin/X (xf86PostMotionEventP+0x86) [0x80c5756]
[  1149.592] 4: /usr/lib/xorg/modules/input/evdev_drv.so (0xb7265000+0x2acd) [0xb7267acd]
[  1149.592] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb7265000+0x3908) [0xb7268908]
[  1149.592] 6: /usr/bin/X (0x8048000+0x6a541) [0x80b2541]
[  1150.590] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[  1150.590] (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg.
[  1819.834] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1819.980] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.123] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.173] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.268] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.337] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.405] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.478] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.558] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.641] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.723] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.828] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.880] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1820.975] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.073] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.185] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.303] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.399] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.490] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.628] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.698] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.777] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.851] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1821.931] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1822.056] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1822.196] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1822.276] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1822.382] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1822.484] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1822.555] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1822.649] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1822.827] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.003] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.107] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.224] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.322] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.420] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.508] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.600] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.678] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.764] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1823.818] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.009] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.098] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.196] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.312] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.402] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.496] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.593] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.692] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.782] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.872] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1824.995] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1825.073] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1825.154] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1825.580] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1826.273] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1826.461] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1827.668] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1827.881] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1827.993] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1828.090] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1828.186] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1828.278] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1828.382] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1828.471] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1828.556] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1828.637] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1828.732] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1828.912] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1829.033] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1829.142] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1829.219] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1829.334] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1829.602] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1829.750] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1829.811] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1829.966] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1830.035] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1830.115] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1830.187] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1830.251] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1830.310] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1830.372] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1830.429] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1830.478] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1830.567] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1894.407] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.070] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.211] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.384] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.472] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.523] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.607] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.632] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.686] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.708] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.764] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.785] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.823] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.858] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.890] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.945] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1895.977] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.015] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.043] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.088] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.146] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.175] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.207] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.260] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.321] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.350] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.377] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.435] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.470] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.504] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.540] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.597] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.661] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.710] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.804] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.864] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.919] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.950] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1896.981] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.028] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.079] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.156] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.219] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.310] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.343] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.375] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.409] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.496] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.526] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.561] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.615] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.677] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.708] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.762] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.879] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.908] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1897.960] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.049] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.169] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.226] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.320] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.353] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.413] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.451] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.485] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.537] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.598] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.630] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.664] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.722] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.831] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1898.938] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.044] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.054] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.098] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.134] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.188] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.283] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.325] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.373] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.407] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.461] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.521] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.612] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.644] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.674] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1899.771] (EE) intel(0): [DRI2] DRI2SwapBuffers: drawable has no back or front?
[  1987.820] (II) AIGLX: Suspending AIGLX clients for VT switch
[  2013.049] (II) AIGLX: Resuming AIGLX clients after VT switch

everything.log

...
Sep 25 21:32:04 localhost kernel: [  796.569938] [drm:intel_prepare_page_flip] *ERROR* Prepared flip multiple times
Sep 25 21:32:04 localhost kernel: [  796.569938] [drm:intel_prepare_page_flip] *ERROR* Prepared flip multiple times
Sep 25 21:37:56 localhost kernel: [ 1150.419934] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
Sep 25 21:37:56 localhost kernel: [ 1150.419958] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
Sep 25 21:37:56 localhost kernel: [ 1150.427420] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 145673 at 145672, next 145674)
Sep 25 21:39:24 localhost -- MARK --
Sep 25 21:51:45 localhost kernel: [ 1978.586143] smplayer[4427]: segfault at 747869 ip b6d34a18 sp bfbe3430 error 4 in libQtGui.so.4.7.4[b6c0a000+a69000]

Gusar · 2011-09-25 20:55:41

Xemertix wrote:

Enabling shadow,disabling dri or downgrading is not a solution.

No, but it's all you've got. Actually, there's one other possibility: Use an old but still supported distro, like CentOS 5. Or if you want to stick with Arch, compile yourself old versions of X and the intel driver.

Xemertix · 2011-09-28 17:08:50

There are some improvements when compiling the latest intel driver with --enable-sna (generation2 detected,but there's light corruption) or --enable-xvmc (sna is faster,but xvmc is stable)..I used --enable-vmap too,but I don't know its purpose.
Now the system is usable enought,better gtkperf scores,and I can play even mkv sd videos with X11 output without much problems but high cpu usage.. Xv and desktop effects still don't work.

The Intel i855 (along with the i830 and i845) chips have suffered serious stability regressions since the implementation of DRI2 (and the associated GEM kernel work) in the driver. These features have stressed parts of the hardware that haven't previously been heavily used in the past, and turn out to have hardware bugs.

http://askubuntu.com/questions/4658/how … 5gm-driver

There are hardware bugs that can't be fixed..so I think we'll newer see a fully working dri2 intel driver for 8xx chipset..

If downgrading I would have to use pre-dri2 driver like 2.9.0 and xorg 1.7.x I think..I would need a complete list about all X related package to recompile.

Gusar · 2011-09-28 17:28:59

Yes, xf86-video-intel-2.9. It works up to xorg-server-1.8, though maybe it'll be stabler with 1.7. The only other packages you'd need to recompile are for input, so xf86-input-evdev and xf86-input-synaptics. I don't know which versions would work with xorg-1.8, you could start with the latest and work your way down until a version compiles and works.

Xemertix · 2011-10-04 21:13:42

I've installed kernel 2.6.33rt,intel 2.9.1,xorg-server 1.7.6,libdrm 2.4.19,xf86-input-evdev 2.3.2,intel-dri 7.7 etc xorg works,but I cant get DRI to work performances are even worse than xorg 1.10 and bluescreens with mplayer.

X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-rt i686 
Current Operating System: Linux myhost 2.6.33-rt #1 SMP PREEMPT RT Sat May 28 12:45:47 UTC 2011 i686
Kernel command line: root=/dev/mapper/vgroup-root cryptdevice=/dev/disk/by-uuid/317043ce-9a77-4dd6-8fab-184e05e1c4fa:vgroup i915.modeset=0 ro
Build Date: 04 October 2011  04:14:27PM
 
Current version of pixman: 0.22.2
	Before reporting problems, check [url]http://wiki.x.org[/url]
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct  4 22:52:14 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x821e780
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:3577:10f7:8338 Intel Corporation 82830 CGC [Chipset Graphics Controller] rev 4, Mem @ 0xe8000000/134217728, 0xe0000000/524288
(--) PCI: (0:0:2:1) 8086:3577:10f7:8338 Intel Corporation 82830 CGC [Chipset Graphics Controller] rev 0, Mem @ 0xf0000000/134217728, 0xe0080000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card1
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card3
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card5
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card7
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card9
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card12
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card15
drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: node name is /dev/dri/card15
(EE) intel(0): [drm] Failed to open DRM device for : No such file or directory
(EE) intel(0): Failed to become DRM master.
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "on"
(**) intel(0): Option "Tiling" "true"
(**) intel(0): Option "XvMC" "on"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 830M
(--) intel(0): Chipset: "i830"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xE0000000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers/sil164.so
(II) Module sil164: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers/ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers/ivch.so
(II) Module ivch: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org Video Driver, version 6.0
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) intel(0): I2C device "DVOI2C_B:i82807aa "ivch" LVDS/CMOS panel controller" registered at address 0x04.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C device "DVODDC_D:ddc2" registered at address 0xA0.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 108288 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 433148 kB available
(WW) intel(0): DRI2: failed to open drm device
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(EE) intel(0): Failed to initialize kernel memory manager
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
	(Cannot allocate memory)
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(WW) intel(0): drmSetMaster failed: Bad file descriptor
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00fe9000 (pgoffset 4073)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x01000000 (pgoffset 4096)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x007df000:            end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x00000000107a0000 physical
)
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x0000000018dec000 physical
)
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x0000000018d9c000 physical
)
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x0000000018dcc000 physical
)
(II) intel(0): 0x007e9000-0x00fe8fff: fake bufmgr (8192 kB)
(II) intel(0): 0x00fe9000-0x00fe9fff: overlay registers (4 kB, 0x000000001904a000 physical
)
(II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x08000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): VR00: 0xa202
(II) intel(0): VR01: 0x0000
(II) intel(0): VR30: 0x0000
(II) intel(0): VR40: 0x3400
(II) intel(0): VR80: 0x0000
(II) intel(0): VR81: 0x0000
(II) intel(0): VR82: 0x000a
(II) intel(0): VR83: 0x000a
(II) intel(0): VR84: 0x000a
(II) intel(0): VR85: 0x000a
(II) intel(0): VR86: 0x000a
(II) intel(0): VR87: 0x000a
(II) intel(0): VR88: 0x000a
(II) intel(0): VR8E: 0x0002
(II) intel(0): VR8F: 0x0003
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 270 x 203
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.6, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device PS/2 Touchpad
(**) PS/2 Touchpad: always reports core events
(**) PS/2 Touchpad: Device: "/dev/input/event8"
(II) PS/2 Touchpad: Found 3 mouse buttons
(II) PS/2 Touchpad: Found relative axes
(II) PS/2 Touchpad: Found x and y relative axes
(II) PS/2 Touchpad: Configuring as mouse
(**) PS/2 Touchpad: YAxisMapping: buttons 4 and 5
(**) PS/2 Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Touchpad" (type: MOUSE)
(**) PS/2 Touchpad: (accel) keeping acceleration scheme 1
(**) PS/2 Touchpad: (accel) acceleration profile 0
(II) PS/2 Touchpad: initialized for relative axes.
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Microsoft(R) Compact Optical Mouse
(**) Microsoft Microsoft(R) Compact Optical Mouse: always reports core events
(**) Microsoft Microsoft(R) Compact Optical Mouse: Device: "/dev/input/event2"
(II) Microsoft Microsoft(R) Compact Optical Mouse: Found 3 mouse buttons
(II) Microsoft Microsoft(R) Compact Optical Mouse: Found scroll wheel(s)
(II) Microsoft Microsoft(R) Compact Optical Mouse: Found relative axes
(II) Microsoft Microsoft(R) Compact Optical Mouse: Found x and y relative axes
(II) Microsoft Microsoft(R) Compact Optical Mouse: Configuring as mouse
(**) Microsoft Microsoft(R) Compact Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft(R) Compact Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft(R) Compact Optical Mouse" (type: MOUSE)
(**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft(R) Compact Optical Mouse: (accel) acceleration profile 0
(II) Microsoft Microsoft(R) Compact Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event4"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event3"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.

Section "ServerFlags"
        Option "DontZap" "false"
Endsection

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/100dpi:unscaled"
	FontPath     "/usr/share/fonts/75dpi:unscaled"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
	Load  "dri"
	Load  "glx"
	Load  "extmod"
	Load  "dbe"
	Load  "record"
	Load  "dri2"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection


Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "CacheLines"         	# <i>
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "XvMCSurfaces"       	# <i>
        #Option     "PageFlip"           	# [<bool>]
        Option "AccelMethod" "uxa"
        Option "Tiling" "true"
        Option "DRI" "on"
        Option "XvMc" "on"
	Identifier  "Card0"
	Driver      "intel"
	VendorName  "Intel Corporation"
	BoardName   "82830 CGC [Chipset Graphics Controller]"
	BusID       "PCI:0:2:0"
EndSection


Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
Endsection	

Section "DRI"
   Mode 0666
EndSection

lspci
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
01:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
01:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
01:01.0 Communication controller: Conexant Systems, Inc. HCF 56k Data/Fax/Voice/Spkp Modem (rev 08)
01:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08)
01:05.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)

Do you know the extact version of these package in order to get a fully working xv video playback?

Do you know an old working live cd (CentOs 5 is install cd only,Ubuntu 9.04 livecd doesnt have vlc,video codecs and repositories dead) with vlc,codecs etc to test video playback?maybe Mandriva..So I would take note of the version of the drivers then install them in archlinux.

I could try xorg 1.11 and xf86-intel-git too,but I dont think they fixed the problem. For reference on windows xp I can play SD avi videos with low cpu usage and even h264 ones without problems..ridiculous XD

karol · 2011-10-04 21:19:04

What video output drivers are you using with mplayer? None of them works?

Xemertix · 2011-10-04 22:24:25

karol wrote:

What video output drivers are you using with mplayer? None of them works?

X11 works (at least with xorg 1.10) but a standard definition avi will take 100% cpu and there is stuttering .. with Xv there's only a bluescreen. On winxp vlc takes less than 20% cpu utilization with the same video.

Arch Linux

#1 2011-09-25 20:38:25

Intel 830m video problems

#2 2011-09-25 20:55:41

Re: Intel 830m video problems

#3 2011-09-28 17:08:50

Re: Intel 830m video problems

#4 2011-09-28 17:28:59

Re: Intel 830m video problems

#5 2011-10-04 21:13:42

Re: Intel 830m video problems

#6 2011-10-04 21:19:04

Re: Intel 830m video problems

#7 2011-10-04 22:24:25

Re: Intel 830m video problems

Board footer