You are not logged in.

#1 2005-06-04 07:02:27

CyberTron
Member
From: Gotland ,Sweden
Registered: 2005-03-17
Posts: 645
Website

Problem applying -ck9 patchset to 2.6.11.11

I can't get it to work..when applying a patch it sais:

patching file sound/usb/usbaudio.c
Reversed (or previously applied) patch detected!  Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file sound/usb/usbaudio.c.rej
patching file sound/usb/usx2y/usbusx2y.c
Reversed (or previously applied) patch detected!  Skipping patch.
4 out of 4 hunks ignored -- saving rejects to file sound/usb/usx2y/usbusx2y.c.rej
==> ERROR: Build Failed.  Aborting...

what am i doin wrong?


http://www.linuxportalen.com  -> Linux Help portal for Linux and ArchLinux (in swedish)

Dell Inspiron 8500
Kernel 2.6.14-archck1  (selfcompiled)
Enlightenment 17

Offline

#2 2005-06-04 07:19:36

cactus
Taco Eater
From: t͈̫̹ͨa͖͕͎̱͈ͨ͆ć̥̖̝o̫̫̼s͈̭̱̞͍̃!̰
Registered: 2004-05-25
Posts: 4,615
Website

Re: Problem applying -ck9 patchset to 2.6.11.11

looks like the patch was already applied...??


"Be conservative in what you send; be liberal in what you accept." -- Postel's Law
"tacos" -- Cactus' Law
"t̥͍͎̪̪͗a̴̻̩͈͚ͨc̠o̩̙͈ͫͅs͙͎̙͊ ͔͇̫̜t͎̳̀a̜̞̗ͩc̗͍͚o̲̯̿s̖̣̤̙͌ ̖̜̈ț̰̫͓ạ̪͖̳c̲͎͕̰̯̃̈o͉ͅs̪ͪ ̜̻̖̜͕" -- -̖͚̫̙̓-̺̠͇ͤ̃ ̜̪̜ͯZ͔̗̭̞ͪA̝͈̙͖̩L͉̠̺͓G̙̞̦͖O̳̗͍

Offline

#3 2005-06-04 07:24:11

CyberTron
Member
From: Gotland ,Sweden
Registered: 2005-03-17
Posts: 645
Website

Re: Problem applying -ck9 patchset to 2.6.11.11

yes i know, but it is a vanilla kernel from the start, and I am applying cko5 on 2.6.11.11

(tried ck9 too samt error, but on a different place)

here is the pkgconfig i use (it is dibbles big_smile)

[root@cybertron kernel1]# cat PKGBUILD
# Contributor: dibblethewrecker <dibblethewrecker.at.jiwe.org>
pkgname=kernel26
pkgver=2.6.11.11
pkgrel=1
pkgdesc="The Linux Kernel 2.6.x.y and modules (IDE support)"
url="http://www.kernel.org"
depends=('module-init-tools')
install=kernel26.install

##### add any patch sources to this section
source=(config ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-$pkgver.tar.bz2 
http://kem.p.lodz.pl/~peter/cko/rel/patch-2.6.11-cko5.bz2 )

# Function to grab var from src
getvar() {
  old=$(cat Makefile | grep "^$1")
  echo $(echo ${old/"$1 ="/} | sed -e "s/[ ]*(.*)[ ]*/1/g")
  return 0
}

build() {
  cd $startdir/src/linux-$pkgver

  ##### Uncomment and apply any patches here
  patch -Np1 -i ../patch-2.6.11-cko5 || return 1

  # get rid of the 'i' in i686
  carch=`echo $CARCH | sed 's|i||'`
  cat ../config | sed "s|#CARCH#|$carch|g" >./.config

  ##### Load config - uncomment your preferred config method
  #yes "" | make config
  #make oldconfig || return 1
  make menuconfig
  #make xconfig
  #make gconfig

  ##### NO USER CHANGES BELOW HERE #####

  # save the current pkgname
  old_pkgname=$pkgname

  # set pkgname for build purposes - DO NOT alter!
  pkgname=kernel26

  # save the updated config to build with today's date
  cp ./.config $startdir/config-$(date +%b%d-%Hh)

  # get EXTRAVERSION from Makefile to create a unique pkgname and /usr/src directory
  _kernextra=$(getvar "EXTRAVERSION")
  # grab the 2.6.x.y version suffix from pkgver
  _y="`echo $pkgver | cut --delim "." --fields 4`"
  # remove .y version suffix from _kernextra
  _kernextra="`echo $_kernextra | sed "s|.$_y||g"`"

  # Read the full kernel version info from new config to use in pathnames and pkgname
  . ./.config

  # Kernel custom - to create a unique pkgname (see below)
  _kerncust="${_kernextra}${CONFIG_LOCALVERSION}"
  # Kernel release - will be the same as Makefile
  _kernrel="${pkgver}${_kerncust}"
  # Get the pkgver suffix for unique pkgname and /boot file suffices
  _pkgversuf="`echo $pkgver | sed "s|2.6.||g" | sed "s|.||g"`"
  # Set /boot file suffices from kernel release and pkgver suffix
  _kernboot="${_pkgversuf}${_kerncust}"

  # Set a new pkgname from  kernel release and pkgver suffix
  pkgname="${pkgname}${_pkgversuf}${_kerncust}"

  # build!
  echo
  echo -n "Do you want to make clean (default YES)? (YES/NO): "
  read choice
  echo
  echo -n "Press any key to start make or CTRL+C to quit"
  read anykey

  if [ "${choice}" = "NO" ] ; then
        make bzImage modules || return 1
  else
        make clean bzImage modules || return 1
  fi

  mkdir -p $startdir/pkg/{lib/modules,boot}
  make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
  cp System.map $startdir/pkg/boot/System.map26${_kernboot}
  cp arch/i386/boot/bzImage $startdir/pkg/boot/vmlinuz26${_kernboot}
  install -D -m644 Makefile 
    $startdir/pkg/usr/src/linux-${_kernrel}/Makefile
  install -D -m644 .config 
    $startdir/pkg/usr/src/linux-${_kernrel}/.config
  install -D -m644 .config $startdir/pkg/boot/kconfig26${_kernboot}
  mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/include
  mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel
  for i in acpi asm-generic asm-i386 config linux math-emu net pcmcia scsi video; do
    cp -a include/$i $startdir/pkg/usr/src/linux-${_kernrel}/include/
  done
  # copy files necessary for later builds, like nvidia and vmware
  cp -a scripts $startdir/pkg/usr/src/linux-${_kernrel}
  mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/.tmp_versions
  cp arch/i386/Makefile $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/
  cp arch/i386/kernel/asm-offsets.s 
    $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel/
  # copy in Kconfig files
  for i in `find . -name "Kconfig*"`; do
    mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/`echo $i | sed 's|/Kconfig.*||'`
    cp $i $startdir/pkg/usr/src/linux-${_kernrel}/$i
  done
  cd $startdir/pkg/usr/src/linux-${_kernrel}/include && ln -s asm-i386 asm
  chown -R root.root $startdir/pkg/usr/src/linux-${_kernrel}
  cd $startdir/pkg/lib/modules/${_kernrel} && 
    (rm -f source build; ln -sf /usr/src/linux-${_kernrel} build)

  # Correct the pkgname in our PKGBUILD - this allows correct gensync operation
  # NOTE: pkgname variable must be declared with first 10 lines of PKGBUILD!
  cd $startdir
  sed -i "1,11 s|pkgname=$old_pkgname|pkgname=$pkgname|" ./PKGBUILD
}
# vim:syntax=sh

http://www.linuxportalen.com  -> Linux Help portal for Linux and ArchLinux (in swedish)

Dell Inspiron 8500
Kernel 2.6.14-archck1  (selfcompiled)
Enlightenment 17

Offline

#4 2005-06-04 07:25:13

dtw
Forum Fellow
From: UK
Registered: 2004-08-03
Posts: 4,431
Website

Re: Problem applying -ck9 patchset to 2.6.11.11

er - yup - that's an affirm on that

Cybertron - have a look at the wiki page that accompanies the PKGBUILD:

If you are using a patchset and your build fails before the config stage retrace the build output and check for patching errors i.e. Failed hunks. If you do have failed hunks check that you are using the correct patch version for you kernel version and check that you are using FRESH source i.e. it hasn't already been patched in a previously completed/failed build

This is pretty common problem but at least you didn't blame me - some people do!

Offline

#5 2005-06-04 07:27:32

medicated
Member
From: Storm Lake, IA
Registered: 2005-03-11
Posts: 79

Re: Problem applying -ck9 patchset to 2.6.11.11

You should be applying the cko5 patch on 2.6.11, not 2.6.11.11. 

http://members.optusnet.com.au/ckolivas/kernel/

I had the same problem until I read Con's website..

Offline

#6 2005-06-04 07:28:27

dtw
Forum Fellow
From: UK
Registered: 2004-08-03
Posts: 4,431
Website

Re: Problem applying -ck9 patchset to 2.6.11.11

i don't even know if the ck/cko sets can be applied to the 2.6.x.y tree - they are only maintained for 2.6.x

They often contain small fixes from the -ac patchset, which may have already been fixed in the new .y branch - you just need to rediff it smile

Or change the patch command to ignore reversed diffs

Offline

#7 2005-06-04 07:31:46

cactus
Taco Eater
From: t͈̫̹ͨa͖͕͎̱͈ͨ͆ć̥̖̝o̫̫̼s͈̭̱̞͍̃!̰
Registered: 2004-05-25
Posts: 4,615
Website

Re: Problem applying -ck9 patchset to 2.6.11.11

Apply to 2.6.11 (This contains 2.6.11.11 already. 3 point releases are chosen for simplicity but -ck contains the 4 point releases in them).


"Be conservative in what you send; be liberal in what you accept." -- Postel's Law
"tacos" -- Cactus' Law
"t̥͍͎̪̪͗a̴̻̩͈͚ͨc̠o̩̙͈ͫͅs͙͎̙͊ ͔͇̫̜t͎̳̀a̜̞̗ͩc̗͍͚o̲̯̿s̖̣̤̙͌ ̖̜̈ț̰̫͓ạ̪͖̳c̲͎͕̰̯̃̈o͉ͅs̪ͪ ̜̻̖̜͕" -- -̖͚̫̙̓-̺̠͇ͤ̃ ̜̪̜ͯZ͔̗̭̞ͪA̝͈̙͖̩L͉̠̺͓G̙̞̦͖O̳̗͍

Offline

#8 2005-06-04 07:32:17

dtw
Forum Fellow
From: UK
Registered: 2004-08-03
Posts: 4,431
Website

Re: Problem applying -ck9 patchset to 2.6.11.11

so, from what medicated is saying, 2.6.11 patched with -ck9 is the same as having 2.6.11.11 patched with -ck extras - the .11 fixes are included in the -ck patch - which is what I said too

Offline

#9 2005-06-04 07:38:39

medicated
Member
From: Storm Lake, IA
Registered: 2005-03-11
Posts: 79

Re: Problem applying -ck9 patchset to 2.6.11.11

Yah..I was getting pretty annoyed when I couldn't get any of the ck patches to work.  I hadn't done my reading and assumed that the patches applied to what was labelled as the latest stable release of the kernel from kernel.org.  I imagine many people have the same problem.  Atleast pretending that makes me feel better about myself..

Offline

#10 2005-06-04 08:13:27

CyberTron
Member
From: Gotland ,Sweden
Registered: 2005-03-17
Posts: 645
Website

Re: Problem applying -ck9 patchset to 2.6.11.11

well, using a plain 2.6.11 kernel worked perfectly Very Happy thanks!!

(also noticed that you may use the 2.6.x.y branch if you remove the || return 1 part of the patch command...but for now I use the plain kernel)


http://www.linuxportalen.com  -> Linux Help portal for Linux and ArchLinux (in swedish)

Dell Inspiron 8500
Kernel 2.6.14-archck1  (selfcompiled)
Enlightenment 17

Offline

#11 2005-06-05 07:26:13

dtw
Forum Fellow
From: UK
Registered: 2004-08-03
Posts: 4,431
Website

Re: Problem applying -ck9 patchset to 2.6.11.11

cool smile

Offline

Board footer

Powered by FluxBB